1 Features
1• AEC-Q100 Qualified with the Following Results:
– Device Temperature Grade 1: –40°C to 125°C
Ambient Operating Temperature Range
– Device HBM ESD Classification Level H2
– Device CDM ESD Classification Level C4B
• Input Voltage Range: 1.4 V to 5.5 V
• Stable Operation With or Without Capacitors
• Foldback Overcurrent Protection
• Package: 5-Pin SOT-23
• Very Low Dropout: 230 mV at 150 mA
• Accuracy: 1%
• Low IQ: 50 μA
• Available in Fixed-Output Voltages:
– 1 V to 3.3 V
• High PSRR: 65 dB at 1 kHz
• Active Output Discharge

2 Applications
. Automotive Head Units
. Audio Amplifiers
. DI Clusters
. ADAS ECUs
. Microprocessor Rails
. USBs
. Body Electronics

3 Description
The TLV713P-Q1 series of low-dropout (LDO) linear
regulators are low quiescent current LDOs with excellent line and load transient performance and are
designed for power-sensitive applications. These
devices provide a typical accuracy of 1%.
The TLV713P-Q1 series of devices is designed to be
stable without an output capacitor. The removal of the
output capacitor allows for a very small solution size.
However, the TLV713P-Q1 series is also stable with
any output capacitor if an output capacitor is used.
The TLV713P-Q1 also provides inrush current control
during device power-up and enabling. The TLV713P-
Q1 limits the input current to the defined current limit
to avoid large currents from flowing from the input
power source. This functionality is especially important in battery-operated devices.
The TLV713P-Q1 series is available in a standard
DBV package and provides an active pulldown circuit
to quickly discharge output loads. The TLV713P-Q1
is suited for automotive applications because the
device is qualified for AEC-Q100 grade 1.