Product Highlights
• TO220 FullPak with low Rdson MOSFET for high power application
• Active Burst Mode to reach the lowest Standby Power Requirements < 100mW
• Auto Restart protection for overload, overtemperature, overvoltage
• External auto-restart enable function
• Built-in soft start and blanking window
• Extendable blanking Window for high load jumps
• Built-in frequency jitter and soft driving for low EMI
• Green Mould Compound
• Pb-free lead plating; RoHS compliant

Description
The CoolSET®-F3R FullPak is the enhanced version of CoolSET®-F3 and targets for the Off-Line Adapters and high power range SMPS in DVD R/W, DVD Combi, set top box, etc. It has a wide Vcc range to 25V by adopting the BiCMOS technology. With the merit of Active Burst Mode, it can achieve the lowest Standby Power Requirements (<100mW) at no load and Vin = 270VAC. Since the controller is always active during the Active Burst Mode, it is an immediate response on load jumps and leads to <1% voltage ripple voltage at output. In case of protection for Overtemperature, Overvoltage, Open loop and Overload conditions, it would enter Auto Restart Mode. Thanks for the internal precise peak current limitation, it can provide accurate information to optimize the dimension of the transformer and the output diode. The built-in blanking window can provide sufficient buffer time before entering the Auto Restart Mode. In case of longer blanking time, a simply addition of capacitor to BA pin can serve the purpose. Furthermore, the built-in frequency jitter function can effectively reduce the EMI noise and further reduce the scale of input filter. The component counts can further be reduced with the various built-in functions such as soft start, blanking time and frequency jitter.

Features
• 650V avalanche rugged CoolMOS® with built-in Startup Cell
• Active Burst Mode for lowest Standby Power
• Fast load jump response in Active Burst Mode
• 67kHz internally fixed switching frequency
• Auto Restart Protection Mode for Overload, Open Loop, VCC Undervoltage, Overtemperature & Overvoltage
• External auto-restart enable pin
• Built-in Soft Start
• Built-in blanking window with extendable blanking time for short duration high current
• Max Duty Cycle 75%
• Overall tolerance of Current Limiting < ±5%
• Internal PWM Leading Edge Blanking
• BiCMOS technology provide wide VCC range
• Built-in Frequency jitter and soft driving for low EMI