GENERAL DESCRIPTIONS SN6B000 is a 8-bit micro controller series with hi-density LCD driver. Combined with one or more SN6BS00 (64-segment drivers), SN6B000 can form one 1024/ 2048/ 4096/ 6144/ 8192 dots LCD system. A dual-tone melody and a voice synthesizer are included in SN6B000. Also, a 7-bit current-type DAC and the PWM circuit are built in SN6B000, so that makes users easily choose a speaker (DA), or a buzzer (PWM) for their applications.
FEATURES ♦ ROM space: 512K words (=219*16=220*8); Program Space: 256K*16 − MC mode:128K words in SN6B000 − MP mode: along with SN6B400 to 256K words ♦ RAM Size: − 256 bytes in SN6B000 − 4*256 bytes in SN6BS00 (2*256 bytes LCD RAM, 2*256 bytes normal RAM) ♦ I/O Port : There are Port0 and Port1 (total 16 pins I/O) − All ports are I/O-type and P0.7 can be modulated with a carry signal − Each port can be set as “H”, ”L”, floating, and high-resistance “H” (150K@5V ) − Every port can wake up chip when chip is in power-down mode ♦ 60 instructions ♦ 8 levels stack buffer supports interrupt and call subroutine ♦ System Clock: − 2MHz RC oscillator − 2M/ 4M(3.58M) crystal ♦ Low speed clock: Register option, 32768 crystal or RC ♦ Three different operation modes can be selected: − Normal mode (both High/Low osc. On). − Slow mode (High osc. Off, Low osc. On). − Stop mode (both High and Low osc. Off). ♦ LCD: 1/16 duty (for 1024) or 1/32 duty, frame rate=64 or 128 Hz. ♦ A voltage regulator and double voltage circuit is included in SN6BS000 ♦ 8 interrupt sources : − 5 internal interrupts: T0, TC0, TC1, TW, SPEECH (non-maskable). − 3 external interrupts: INTP0.0 ~ INTP0.2 − ISR entry location: Reset: 0000, SPEECH: 0018h, and the others: 0008h ♦ Voice: − Built-in voice synthesizer − Sampling rate from 4K to 40Khz − Dual tone melody with 4 octaves − 7-bit DA converter (maximum 3mA) − PWM output for Buzzer
|