GENERAL DESCRIPTION
The AD9250 is a dual, 14-bit ADC with sampling speeds of up to 250 MSPS. The AD9250 is designed to support communications applications where low cost, small size, wide bandwidth, and versatility are desired.

FEATURES
   JESD204B Subclass 0 or Subclass 1 coded serial digital outputs
   Signal-to-noise ratio (SNR) = 70.6 dBFS at 185 MHz AIN and
      250 MSPS
   Spurious-free dynamic range (SFDR) = 88 dBc at 185 MHz
      AIN and 250 MSPS
   Total power consumption: 711 mW at 250 MSPS
   1.8 V supply voltages
   Integer 1-to-8 input clock divider
   Sample rates of up to 250 MSPS
   IF sampling frequencies of up to 400 MHz
   Internal analog-to-digital converter (ADC) voltage reference
   Flexible analog input range
      1.4 V p-p to 2.0 V p-p (1.75 V p-p nominal)
   ADC clock duty cycle stabilizer (DCS)
   95 dB channel isolation/crosstalk
   Serial port control
   Energy saving power-down modes
  
APPLICATIONS
   Diversity radio systems
   Multimode digital receivers (3G)
      TD-SCDMA, WiMAX, W-CDMA, CDMA2000, GSM, EDGE, LTE
   DOCSIS 3.0 CMTS upstream receive paths
   HFC digital reverse path receivers
   I/Q demodulation systems
   Smart antenna systems
   Electronic test and measurement equipment
   Radar receivers
   COMSEC radio architectures
   IED detection/jamming systems
   General-purpose software radios
   Broadband data applications