 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
-9161.. Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 TME | 9-1614349-4 | TE Connectivity | Resistor: thin film; 7.5Ω; 63mW; 1.55x0.8x0.45mm; -55÷155°C RoHS : Compliant |
| 1,000 | |
| 91615-310LF | Amphenol Corporation | Connector: PCB to PCB; female; data; 2A; 1kV; PIN: 20; 2.54mm |
| 840 | ||
| 916125-DHUV | Metcal | Needle: plastic; 1.25"; Size: 16; straight; UV block; polypropylene |
| 430 | ||
| 1.089.1614.19 | HUMMEL AG | Insert for gland; 4.5mm; NPT1/2"; elastomer; Holes no: 2; HSK-ME |
| 72 | ||
| 3RT2916-1EH00 | Siemens | Surge arrester; diode assemblie; Size: S00; 12÷250VDC; 3RT20 RoHS : Compliant |
| 61 | ||
| 91616 | Goobay | Patch cord; S/FTP; Cat 6a; RJ45 plug,both sides; 3m; stranded; Cu |
| 14 | ||
| 609161N001 | TE Connectivity | 609161N001 |
| 10 | ||
| 9-1617350-9 | TE Connectivity | Relay: electromagnetic; Ucoil: 3.4VDC,6VDC; DPDT; signal; PCB; 200Ω RoHS : Not Compliant |
| 3 | ||
| 09161140 | GSR | Tap: inch; UNF 5/16"; right hand thread; 24; L: 90mm; 6.2mm; 2B |
| 0 | ||
| 10C091612306 | MEC Switches A/S | Button; none; black; Button marking: Standby |
| 0 | ||
| 91616 | ProLinear/PONTECH Inc | Drill bit; for concrete; Ø: 16mm; L: 160mm; SDS-Plus® |
| 0 | ||
| 09161072001 | HARTING Technology Group | Connector: HDC; contact insert; male; 10A; 250V; Han® DDD; PIN: 107 RoHS : Compliant |
| 0 | ||
| 1119161 | Lapp Group | Wire; ÖLFLEX® CLASSIC 110; 61G0.75mm2; unshielded; 300V,500V; Cu RoHS : Compliant |
| 0 | ||
| 3RT2916-1LP00 | Siemens | Surge arrester; noise suppression diode; Size: S00; 150÷250VDC |
| 0 | ||
| 41091618 | Stahlwille Tools | Wrench: ring; double-sided,bent,special; 16mm,18mm; L: 200mm; C |
| 0 | ||
 Verical | 9-1617542-8 | TE Connectivity | Signal Relay 2.6VDC 1A DPDT THT RoHS : Not Compliant |
| 754 | |
| 9-1612503-1 | TE Connectivity | Battery Connector 5 Cells Thermoplastic Tray RoHS : Compliant |
| 717 | ||
| 9-1612503-1 | TE Connectivity | Battery Connector 5 Cells Thermoplastic Tray RoHS : Compliant |
| 450 | ||
| 91-612-07 | Southco | 91-612-07 |
| 375 | ||
| 9-1611461-2 | TE Connectivity | Power Transformer 50VA 5 Terminal Wire Lead Flange Mount RoHS : Compliant |
| 340 | ||
| 9-1618389-8 | TE Connectivity | Contactor 24VDC SPST-NO-DM 100A Bottom Mount RoHS : Exempt |
| 147 | ||
| 9-1617760-6 | TE Connectivity | Power Relay 28VDC 5A 4PDT(20.37x20.37x16.26)mm Flange RoHS : Not Compliant |
| 97 | ||
| 9-1618389-8 | TE Connectivity | Contactor 24VDC SPST-NO-DM 100A Bottom Mount RoHS : Exempt |
| 85 | ||
| 9-1618389-8 | TE Connectivity | Contactor 24VDC SPST-NO-DM 100A Bottom Mount RoHS : Exempt |
| 81 | ||
| 9-1618389-8 | TE Connectivity | Contactor 24VDC SPST-NO-DM 100A Bottom Mount RoHS : Exempt |
| 40 | ||
| 9-1617760-6 | TE Connectivity | Power Relay 28VDC 5A 4PDT(20.37x20.37x16.26)mm Flange RoHS : Not Compliant |
| 19 | ||
| 91618-311LF | Amphenol FCi | Dubox® 2.54mm, Board to Board Connector, PCB Mounted Receptacle, Vertical, Surface Mount, Double row, Top Entry, 22 Positions, 2.54mm (0.100in) Pitch RoHS : Compliant |
| 12 | ||
| 9-1618389-8 | TE Connectivity | Contactor 24VDC SPST-NO-DM 100A Bottom Mount RoHS : Exempt |
| 10 | ||
| 9-1618389-8 | TE Connectivity | Contactor 24VDC SPST-NO-DM 100A Bottom Mount RoHS : Exempt |
| 10 | ||
| 9-1617760-6 | TE Connectivity | Power Relay 28VDC 5A 4PDT(20.37x20.37x16.26)mm Flange RoHS : Not Compliant |
| 1 | ||
 Avnet Americas | 02-09-1615 | Molex | Terminal, Socket, Wire to Wire Connector, Tin, Brass, Cable Mount, Straight, 42477 Series, 17 A - Tape and Reel (Alt: 0002091615) RoHS : Compliant |
| 28,000 | |
BCP69-16,115 | Nexperia | Trans GP BJT PNP 20V 2A 4-Pin(3+Tab) SOT-223 T/R - Tape and Reel (Alt: BCP69-16,115) RoHS : Compliant |
| 13,000 | ||
| AT62-209-16141 | Amphenol Corporation | Circular Contact Socket Crimp ST Cable Mount - Boxed Product (Development Kits) (Alt: AT62-209-16141) RoHS : Compliant |
| 11,925 | ||
| 15-91-6102 | Molex | Pin Header, 10 Contacts, 2 Rows, 2.54mm, Gold, 3A, Straight, Unshrouded, Copper Alloy, SMT, LCP - Tape and Reel (Alt: 0015916102) RoHS : Compliant |
| 10,000 | ||
| 1871916-1 | TE Connectivity | - Tape and Reel (Alt: 1871916-1) RoHS : Compliant |
| 6,000 | ||
| 2-323916-1 | TE Connectivity | - Bag (Alt: 2-323916-1) RoHS : Compliant |
| 4,000 | ||
| 9-1612503-1 | TE Connectivity | - Trays (Alt: 9-1612503-1) RoHS : Compliant |
| 3,480 | ||
| 15-97-9161 | Molex | Connector Housing, Receptacle, 16 Contacts, 2 Rows, 4.2 mm, 30072 Series, Nylon, Mini-Fit TPA - Bulk (Alt: 0015979161) RoHS : Compliant |
| 2,528 | ||
| NM-212-009-161-JCAC | Molex | I/O Connector, Plug, Nano-D Subminiature Connector, 9 Contacts, Gold, Beryllium Copper, Cable Mount - Bulk (Alt: NM-212-009-161-JCAC) RoHS : Compliant |
| 5 | ||
| MM-312-069-161-41WD | Molex | I/O Connector, Plug, Micro-D Sub Cable Assembly, 69 Contacts, Gold, Beryllium Copper, Cable Mount - Bulk (Alt: MM-312-069-161-41WD) RoHS : Compliant |
| 5 | ||
| NM-212-009-161-JCAB | Molex | NANO-D, PLUG, PRE-TERMINATED, 9 POSITION CONNECTOR - Bulk (Alt: NM-212-009-161-JCAB) RoHS : Compliant |
| 3 | ||
| APH2-09-16-1-B | TE Connectivity | Banding Backshell for MIL-DTL-38999 Series III & IV Circular Connectors 9 Shell Size Aluminum 45? - Bulk (Alt: APH2-09-16-1-B) RoHS : Not Compliant | 0 | |||
| 1891610000 | Weidmüller Interface GmbH & Co. KG | - Bulk (Alt: 1891610000) RoHS : Not Compliant | 0 | |||
| 10131319-16121G0LF | Amphenol Corporation | - Trays (Alt: 10131319-16121G0LF) RoHS : Not Compliant |
| 0 | ||
| 11191613-00 | TE Connectivity | AST4200J00100P4E1000:CTO-13000000-02 - Bag (Alt: 11191613-00) RoHS : Not Compliant |
| 0 | ||
 Arrow Electronics | 91614-310LF | Amphenol FCi | Dubox® 2.54mm, Board to Board Connector, PCB Mounted Receptacle, Vertical, Surface Mount, Dual Entry, Single Row, 10 Position ,2.54mm (0.100in) Pitch RoHS : Compliant |
| 912 | |
| 9-1617542-8 | TE Connectivity | Signal Relay 2.6VDC 1A DPDT THT RoHS : Not Compliant |
| 754 | ||
| 9-1612503-1 | TE Connectivity | Battery Connector 5 Cells Thermoplastic Tray RoHS : Compliant |
| 717 | ||
| 9-1614884-7 | TE Connectivity | Res Thin Film 0805 51K Ohm 0.1% 0.1W(1/10W) ±25ppm/°C Pad SMD T/R Medical Automotive AEC-Q200 RoHS : Compliant |
| 428 | ||
| 91614-307ALF | Amphenol FCi | Dubox® 2.54mm, Board to Board Connector, PCB Mounted Receptacle, Vertical, Surface Mount, Dual Entry, Single Row, 7 Position ,2.54mm (0.100in) Pitch RoHS : Compliant |
| 400 | ||
| 91618-308ALF | Amphenol FCi | Dubox® 2.54mm, Board to Board Connector, PCB Mounted Receptacle, Vertical, Surface Mount, Double row, Top Entry, 16 Positions, 2.54mm (0.100in) Pitch RoHS : Compliant |
| 370 | ||
| 9-1618389-8 | TE Connectivity | Contactor 24VDC SPST-NO-DM 100A Bottom Mount RoHS : Exempt |
| 147 | ||
| 9-1614353-1 | TE Connectivity | Res Thin Film 0603 49.9 Ohm 0.1% 0.063W(1/16W) ±10ppm/°C Pad SMD Cut Tape Medical RoHS : Compliant |
| 48 | ||
| 9-1614884-2 | TE Connectivity | Res Thin Film 0805 27K Ohm 0.1% 0.1W(1/10W) ±25ppm/°C Pad SMD T/R Medical Automotive AEC-Q200 RoHS : Compliant |
| 30 | ||
| 91618-311LF | Amphenol FCi | Dubox® 2.54mm, Board to Board Connector, PCB Mounted Receptacle, Vertical, Surface Mount, Double row, Top Entry, 22 Positions, 2.54mm (0.100in) Pitch RoHS : Compliant |
| 12 | ||
| 9-1618389-8 | TE Connectivity | Contactor 24VDC SPST-NO-DM 100A Bottom Mount RoHS : Exempt |
| 10 | ||
| 9-1618389-8 | TE Connectivity | Contactor 24VDC SPST-NO-DM 100A Bottom Mount RoHS : Exempt |
| 8 | ||
| 9-1614353-1 | TE Connectivity | Res Thin Film 0603 49.9 Ohm 0.1% 0.063W(1/16W) ±10ppm/°C Pad SMD Cut Tape Medical RoHS : Compliant |
| 8 | ||
| 9-1617760-6 | TE Connectivity | Power Relay 28VDC 5A 4PDT(20.37x20.37x16.26)mm Flange RoHS : Not Compliant |
| 1 | ||
| 9-1614882-7 | TE Connectivity | Res Thin Film 0603 18 Ohm 0.1% 0.063W(1/16W) ±25ppm/°C Pad SMD T/R Medical Automotive AEC-Q200 RoHS : Compliant |
| 1 | ||
 Newark | 02-09-1615 | Molex | Contact, Socket, 18-14Awg, Crimp; |Molex 02-09-1615 RoHS : Compliant |
| 13,692 | |
| FDS89161LZ | onsemi | Mosfet, N-Ch, 100V, 2.7A, Soic-8; |Onsemi FDS89161LZ RoHS : Compliant |
| 1,783 | ||
| FDS89161LZ | onsemi | Mosfet, N-Ch, 100V, 2.7A, Soic-8; |Onsemi FDS89161LZ RoHS : Compliant |
| 1,783 | ||
| 9161-1000-60 | Belden Inc | Cbl, Multipair, Unshielded, 8.0, 18Awg; |Belden 9161-1000-60 RoHS : Compliant |
| 1,000 | ||
| MP009161 | SPC Multicomp | Cable Assy, 10P Idc Rcpt-Free End, 300Mm; |Multicomp Pro MP009161 RoHS : Compliant |
| 710 | ||
| PSG91614 | Pro-Signal | Computer Cable, Pro Signal Psg91614; |Pro Signal PSG91614 (Alternate Part Number: 5051259205468 RoHS : Compliant |
| 67 | ||
| 916150-PTS | Metcal | Needle, 16 Guage, Brown, Syringe, Pk50; |Metcal 916150-PTS RoHS : Compliant |
| 56 | ||
| T1509161000-000 | TE Connectivity | H16A-Ags Rohs Compliant: Yes |Te Connectivity T1509161000-000 RoHS : Compliant |
| 46 | ||
| 744869161273 | Wurth Elektronik | Common Mode Choke, 27Mh, 1A, 250Vac; |Würth Elektronik 744869161273 RoHS : Compliant |
| 32 | ||
| T1619161120-000 | TE Connectivity | Heavy Duty Conn, 1 Lever, Size H16A; |Te Connectivity T1619161120-000 RoHS : Compliant |
| 28 | ||
| NSYTBS191610H | Schneider Electric | Industrial Box, Wall Mount, Abs, Grey; |Schneider Electric NSYTBS191610H RoHS : Compliant |
| 22 | ||
| 9-1618415-7 | TE Connectivity | Contactor, Spst-No-Dm, 36Vdc/500A, Flnge; Load Current Inductive:-; Relay Mounting:Flange; Operating Voltage:1.5Kv; Contact Configuration:Spst-No-Dm; No. Of Poles:1 Pole; Switching Power Ac3:-; Switching Current Ac1:- |Te Connectivity Kilovac 9-1618415-7 RoHS : Not Compliant |
| 8 | ||
| 09161083001 | HARTING Technology Group | Rectangular Han Insert Plug 108Way Crimp; Product Range:Han Dd Series; No. Of Contacts:109Contacts; Rectangular Shell Size:24B; Gender:Plug; Heavy Duty Contact Type:Crimp Pin - Contacts Not Supplied; Current Rating:10A; No. Of Rows:6Rohs Compliant: Yes RoHS : Compliant |
| 7 | ||
| 15-91-6122 | Molex | Conn, Hdr, 12Pos, 2Row, 2.54Mm, Smt; |Molex 15-91-6122 RoHS : Compliant |
| 6 | ||
| 91-6115-NXFMR20 | Simco-Ion | 6115 Airforce Blow-Off Gun, 20 Foot Hose; |Simco-Ion 91-6115-NXFMR20 RoHS : Not Compliant |
| 1 | ||
 Analog Devices Inc | AD9161BBCZ | Analog Devices Inc | 11-Bit, 10.2 GSPS RF DAC and d RoHS : Compliant |
| 2,739 | |
| AD9161-FMCC-EBZ | Analog Devices Inc | Evaluation Board RoHS : Compliant |
| 11 | ||
| AD9161BBCZRL | Analog Devices Inc | 11-Bit, 10.2 GSPS RF DAC and d RoHS : Compliant |
| 0 | ||
 RS | AT62-209-16141 | Amphenol Sine Systems | SIZE 16 MACHINED SOCKET CONTACT, NICKEL PLATING, 13A, 14 AWG, A SERIES |
| 6,836 | |
| 3RT29161BB00 (3RT2916-1BB00) | Siemens | SURGE SUPPRESSOR, VARISTOR, SIZE S00, 24-48 VAC, 24-70 VDC, 3RT SERIES |
| 218 | ||
| C091 61G004 1102 | Amphenol Tuchel | REAR MTG MALE METAL RECEPT W/O-RING SEAL AND RING NUT MOUNT. 4 CONTACTS,10A |
| 89 | ||
| 09161083001 | HARTING Technology Group | RECTANGULAR PLUG INSERT, 108+PE, 24B, 14-26AWG, CRIMP, 600V, 10A, HAN DD SERIES RoHS : Compliant |
| 70 | ||
| 3RT29161EH00 | Siemens | SURGE SUPPRESSOR, 12-250VDC, CLIP-ON MOUNT, 3RT SERIES |
| 41 | ||
| 3RT29161CB00 | Siemens | SURGE SUPPRESSOR, RC ELEMENT, 24-48 V AC, 50/60 HZ, 24-70 V DC, S00 SERIES |
| 27 | ||
| 3RT29161CD00 (3RT2916-1CD00) | Siemens | SURGE SUPPRESR S00 RC ELEMENT AC 127-240 |
| 20 | ||
| 09149161101 | HARTING Technology Group | HAN DOMINO 16PIN HD CUBE FEMALE CRIMP - POS. 1 RoHS : Compliant |
| 11 | ||
| 3RT29161JK00 (3RT2916-1JK00) | Siemens | 70 V DC, 127 V AC 3RT SURGE SUPPRESSOR, CLIP ON MOUNTING |
| 11 | ||
| 66623399161 | Norton Winter | BLUEFIRE PLASTIC FLAT FLAP DISC T27 P60GRIT R884P ZA, 7 X 7/8 IN. |
| 10 | ||
| 4979 (1916112) | Pomona Electronics | CONNECTOR COAXIAL 50 OHMS BULKHEAD BNC GOLD MALE BRASS PTFE |
| 8 | ||
9-1618389-8 | TE Connectivity | CONTACTOR, RELAY, ELECTRO MECHANICAL,100A,900VDC, SPST-NO, LEV100 SERIES, RoHS : Compliant |
| 7 | ||
| 3RT29161JL00 | Siemens | CONTACTOR SURGE SUPPRESSOR FOR USE WITHMOTOR SIZE S00, 3RT SERIES |
| 6 | ||
| 6191613 | RS Pro | FILLER PROFILE EPDM 9.5MM. |
| 4 | ||
| S18SN6DQ-19161 (19161) | Banner Engineering Corp | PHOTOELECTRIC SENSOR, DIFFUSE, 100MM, 10-30VDC, NPN, QD, S18 |
| 3 | ||
 Microchip Technology Inc | GC49161-12 | Microchip Technology Inc | Si PIN Non Hermetic Beam Lead, Projected EOL: 2046-08-15 - Contact for Pricing | 0 | ||
 Onlinecomponents.com | 9161 | HH Smith | Nylon Round Spacer - 3/16" OD - #2 ID - 3/16" Length. RoHS : Compliant |
| 0 | |
| 9161 | Heyco | PRH 122-118 WHITE RoHS : Compliant |
| 0 | ||
| 9161 | Desco Industries Inc | RoHS : Compliant |
| 0 | ||
 Rochester Electronics | BC869-16,115 | NXP Semiconductors | Small Signal Bipolar Transistor, 2A, 20V, PNP, TO-243AA RoHS : Compliant |
| 67,000 | |
| TEA19161CT/1Y | NXP Semiconductors | TEA19161CT - Digital controller for high-efficiency resonant power supply RoHS : Compliant |
| 444,620 | ||
TEA19161T/2Y | NXP Semiconductors | Analog Circuit RoHS : Compliant |
| 24,764 | ||
| BCP69-16,115 | Nexperia | Trans BJTs Single 20V 2A SC-73 T/R RoHS : Compliant |
| 509,659 | ||
BC869-16,115 | Nexperia | Small Signal Bipolar Transistor, 2A, 20V, PNP, TO-243AA RoHS : Compliant |
| 71,894 | ||
| FDS89161 | onsemi | MOSFET 2 N-Channel 100V 2.7A (Ta) 8-SOIC T/R RoHS : Compliant |
| 1,808 | ||
| TLE49161KHTSA1 | Infineon Technologies AG | Hall Effect Sensor, -5mT Min, 5mT Max, -0.3-5.0V, Rectangular, 3 Pin, Surface Mount RoHS : Compliant |
| 41,273 | ||
| AD9161BBCZ | Analog Devices Inc | D/A Converter, 1 Func, Serial, Parallel, Word Input Loading, PBGA169 RoHS : Compliant |
| 12 | ||
UCC39161DP | Texas Instruments | Power Supply Support Circuit, Fixed, 1 Channel, BICMOS, PDSO8 RoHS : Compliant |
| 17,057 | ||
ISL89161FBEAZ | Intersil Corporation | AND Gate Based MOSFET Driver, 6A, PDSO8 RoHS : Compliant |
| 3,642 | ||
| ISL89161FBEBZ | Intersil Corporation | AND Gate Based MOSFET Driver RoHS : Compliant |
| 4,849 | ||
ISL89161FRTAZ | Intersil Corporation | AND Gate Based MOSFET Driver, 6A, PDSO8 RoHS : Compliant |
| 800 | ||
| ISL89161FRTBZ | Intersil Corporation | AND Gate Based MOSFET Driver RoHS : Compliant |
| 945 | ||
| UCC39161DP | Unitrode Corporation | Power Supply Support Circuit, Fixed, 1 Channel, BICMOS, PDSO8 RoHS : Compliant |
| 1,825 | ||
 Sager | APF1-19-16-10-1-B | TE Connectivity | TE Connectivity APF1-19-16-10-1-B RoHS : Not Compliant | 0 | ||
| APH2-09-16-1-B | TE Connectivity | TE Connectivity APH2-09-16-1-B RoHS : Not Compliant | 0 | |||
| 11191613-00 | TE Connectivity | AST4200J00100P4E1000:CTO-13000000-02 |
| 0 | ||
| 7702119161 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 7704916117 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 7705619161 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 7705916107 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 7705916152 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 8516916159 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 858916-1 | TE Connectivity | Rectangular MIL Spec Connectors RECEPTACLE | 0 | |||
| 9-1614707-6 | TE Connectivity | RN 1206 3K01 0.1% 10PPM 5K RL RoHS : Compliant |
| 0 | ||
| 9-1616154-8 | TE Connectivity | Crimpers / Crimping Tools 13621010=COVER |
| 0 | ||
| 9-1616203-3 | TE Connectivity | General Purpose Relays ACTUATR ASSEMBLY- SU |
| 0 | ||
| 9-1616231-2 | TE Connectivity | Terminals 30758020=TERMINAL ASSY |
| 0 | ||
| 9-1616235-8 | TE Connectivity | TE Connectivity 31160010=TERMINAL SHIELD ASSY |
| 0 | ||
 ComSIT USA | 15916102 | Molex | AVAILABLE EU RoHS : Compliant | 5,406 | ||
ComSIT USA | 19629161 | TE Connectivity | TAB Terminal, 30A, 2.5mm2 RoHS : Not Compliant | 99,000 | ||
| 3006916100 | Marquardt Switches Inc | Electronic Component RoHS : Not Compliant | 35,627 | |||
| 29629161 | TE Connectivity | TAB Terminal, 2.5mm2 RoHS : Not Compliant | 13,200 | |||
| SKY7791611 | Skyworks Solutions Inc | TX-RX FEM FOR QUAD-BAND GSM / GPRS / EDGE W/ 14 LINEAR TRX S/W PORTS, DUAL-BAND TD-SCDMA, AND TDD LTE BAND39 Telecom Circuit, 1-Func RoHS : Compliant | 4,320 | |||
| ETD2916103F3 | Ferroxcube International Holding BV | FERRITE CORE ETD RoHS : Compliant | 3,072 | |||
FDS89161LZ | Fairchild Semiconductor Corporation | DUAL N-CHANNEL SHIELDED GATE POWERTRENCH MOSFET Power Field-Effect Transistor, 2.7A I(D), 100V, 0.105ohm, 2-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 2,500 | |||
DM9161AEP | Davicom Semiconductor Inc | 10/100 MBPS FAST ETHERNET PHYSICAL LAYER SINGLE CHIP TRANSCEIVER Ethernet Transceiver, CMOS, PQFP48 RoHS : Compliant | 2,359 | |||
| BFC233916105 | Vishay Intertechnologies | Film Capacitor, Polypropylene, 800V, 10% +Tol, 10% -Tol, 1uF, Through Hole Mount RoHS : Not Compliant | 300 | |||
| 91615323LF | Amphenol FCi | BTB RECEPT VERT DR TMT Board Connector, 46 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal, Receptacle RoHS : Compliant | 76 | |||
| BCP6916115 | NXP Semiconductors | Trans GP BJT PNP 20V 2A 1350mW 4-Pin(3+Tab) SC-73 T/R Automotive AEC-Q101 RoHS : Compliant | 35 | |||
| DM9161EP | Davicom Semiconductor Inc | 10/100 MBPS FAST ETHERNET PHYSICAL LAYER TX/FX SINGLE CHIP TRANSCEIVER Ethernet Transceiver, CMOS, PQFP48 RoHS : Not Compliant | 21 | |||
 Interstate Connecting Components | 10131319-16121G0LF | Amphenol FCi | 10131319-16121G0LF-MINITEK PWR RoHS : Compliant | 0 | ||
| 11191613-00 | TE Connectivity | AST4200J00100P4E1000:CTO-13000 | 0 | |||
| 9-1614349-4 | TE Connectivity | RN 0603 7R5 0.1% 10PPM 1K RL RoHS : Compliant |
| 0 | ||
| 9-1614351-1 | TE Connectivity | RN 0603 49R9 0.1% 10PPM 1K RL RoHS : Compliant |
| 0 | ||
| 9-1614707-6 | TE Connectivity | RN 1206 3K01 0.1% 10PPM 5K RL RoHS : Compliant |
| 0 | ||
| 9-1614964-1 | TE Connectivity | CPF 1206 2K4 0.1% 25PPM 1K RL RoHS : Compliant |
| 0 | ||
| 9-1614970-4 | TE Connectivity | CPF 1206 7R87 0.1% 25PPM 1K RL RoHS : Compliant |
| 0 | ||
| 9-1616154-8 | TE Connectivity | 13621010=COVER |
| 0 | ||
| 9-1616203-3 | TE Connectivity | 24685070=ACTUATOR ASSEMBLY- SU |
| 0 | ||
| 9-1616231-2 | TE Connectivity | 30758020=TERMINAL ASSY. |
| 0 | ||
| 9-1616235-8 | TE Connectivity | 31160010=TERMINAL SHIELD ASSY |
| 0 | ||
| 9-1616968-5 | TE Connectivity | BP494G1= CONTACTOR - 3PST NO S |
| 0 | ||
| 9-1617350-9 | TE Connectivity | JMSC-6XP=M39016/11-034P RoHS : Not Compliant |
| 0 | ||
| 9-1617590-3 | TE Connectivity | J1MAWT-5XP=M28776/5-013P RoHS : Compliant |
| 0 | ||
| 9-1617805-4 | TE Connectivity | TD231-5002P=TDAR 5 TO 50 SEC RoHS : Compliant |
| 0 | ||
 PEI Genesis | C091-61N007-130-2 | Amphenol Tuchel |
| 0 | ||
| C091-61G007-120-2 | Amphenol Tuchel |
| 0 | |||
| 505229-1611 | SOURIAU-SUNBANK |
| 0 | |||
| C091-61G107-110-2 | Amphenol Tuchel |
| 0 | |||
| M85049/16-19Z | Amphenol PCD |
| 0 | |||
| 10-565991-61N | Amphenol Corporation |
| 0 | |||
| C091-61G008-210-2 | Amphenol Tuchel |
| 0 | |||
| CT9-16-11PSA232 | ITT Interconnect Solutions |
| 0 | |||
| C091-61C007-110-2 | Amphenol Tuchel |
| 0 | |||
| C10-597109-161 | Amphenol Corporation |
| 0 | |||
| S4180A1916-12-2 | SOURIAU-SUNBANK |
| 0 | |||
| C091-61G004-110-2 | Amphenol Tuchel |
| 0 | |||
| M85049/16-15W | Amphenol PCD |
| 0 | |||
| C091-61G006-120-2 | Amphenol Tuchel |
| 0 | |||
| 10-475929-161 | Amphenol Corporation |
| 0 | |||
 Powell Electronics | 619-1614-089 | Amphenol Cable & Interconnect Technologies | CONTACT |
| 6,044 | |
| 91618-325LF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 962 | ||
| 9-1614349-4 | TE Connectivity | Resistors RoHS : Compliant |
| 660 | ||
| 9-1614349-2 | TE Connectivity | Resistors RoHS : Compliant |
| 660 | ||
| 9-1614350-3 | TE Connectivity | Resistors RoHS : Compliant |
| 660 | ||
| 9-1614351-9 | TE Connectivity | Resistors RoHS : Compliant |
| 660 | ||
| 91615-320LF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 317 | ||
| T1629161225-000 | TE Connectivity | Power Connectors RoHS : Compliant |
| 46 | ||
| T1619161125-000 | TE Connectivity | Power Connectors RoHS : Compliant |
| 23 | ||
| T1509161000-000 | TE Connectivity | Power Connectors RoHS : Compliant |
| 9 | ||
| 3600-009-1612 | Amphenol Corporation | PIN INSERT |
| 5 | ||
| 9-1616920-5 | TE Connectivity | Relays |
| 5 | ||
| MQHT-212-009-161-41WD | AirBorn a molex company | MQHT-212-009-161-41WD |
| 4 | ||
| 9-1617350-9 | TE Connectivity | Relays RoHS : Not Compliant |
| 2 | ||
| 5916-1103-603 | Radiall | RF Component RoHS : Compliant |
| 2 | ||
 PUI | 12.89161 | 10,973 | ||||
| 7916-15FAA | 267 | |||||
| 7916-15FN4/6MM | 41 | |||||
| 7916-15FHA | 7 | |||||
 Chip 1 Exchange | 02-09-1615 | Molex | INSTOCK RoHS : Compliant | 200,200 | ||
| 15-91-6142 | Molex | INSTOCK RoHS : Compliant | 167,763 | |||
| 0462-209-16141 | TE Connectivity | INSTOCK RoHS : Compliant | 121,953 | |||
| 1-962916-1 | TE Connectivity | INSTOCK RoHS : Compliant | 94,380 | |||
| 54679-1619 | Molex | INSTOCK | 48,256 | |||
| 15-91-6143 | Molex | INSTOCK | 6,383 | |||
| 150-80-320-01-899161 | PRECI | INSTOCK | 6,136 | |||
| 1-1670916-1 | TE Connectivity | INSTOCK RoHS : Compliant | 5,159 | |||
| 15-91-6100 | Molex | INSTOCK | 3,432 | |||
| 223891615649 | INSTOCK | 2,140 | ||||
| BCP69-16115 | NXP Semiconductors | INSTOCK | 597 | |||
| 0460-229-16141 | TE Connectivity | INSTOCK RoHS : Compliant | 70 | |||
| 14.91.611 | ETTGR | INSTOCK | 29 | |||
| 0462-209-16141 | TE Connectivity | INSTOCK RoHS : Compliant | 21 | |||
| A51S24916-11 | INSTOCK | 1 | ||||
 Avnet Abacus | 1-962916-1 | TE Connectivity | (Alt: 1-962916-1) RoHS : Compliant | 102,300 | ||
| 0462-209-16141 | TE Connectivity | Rectangular Power Contact DT Nickel Plated Contacts Copper Alloy Socket Crimp 14 AWG (Alt: 0462-209-16141) RoHS : Compliant | 12,500 | |||
| AT62-209-16141 | Amphenol Corporation | (Alt: AT62-209-16141) RoHS : Compliant | 5,000 | |||
| 9-1618389-8 | TE Connectivity | (Alt: 9-1618389-8) RoHS : Compliant | 969 | |||
| MM-313-069-161-00WR | Molex | AirBorn M Series MicroD Cable Mount Plug 0050 127mm Pitch Vertical PreWired Crimped (Alt: MM-313-069-161-00WR) RoHS : Not Compliant | 5 | |||
| MM-213-009-161-22WQ | Molex | AirBorn M Series MicroD Cable Mount Plug 0050 127mm Pitch Vertical PreWired Crimped (Alt: MM-213-009-161-22WQ) RoHS : Not Compliant | 5 | |||
| MM-312-069-161-45WR | Molex | AirBorn M Series MicroD Cable Mount Plug 0050 127mm Pitch Vertical PreWired Crimped (Alt: MM-312-069-161-45WR) RoHS : Compliant | 5 | |||
| MQ-212-009-161-45WD | Molex | AirBorn M Series MicroD LowProfile Cable Mount Plug 0050 127mm Pitch Vertical (Alt: MQ-212-009-161-45WD) RoHS : Compliant | 5 | |||
| MM-212-009-161-45WD | Molex | AirBorn M Series MicroD Cable Mount Plug 0050 127mm Pitch Vertical PreWired Crimped (Alt: MM-212-009-161-45WD) RoHS : Compliant | 5 | |||
| MM-212-009-161-00W1 | Molex | AirBorn M Series MicroD Cable Mount Plug 0050 127mm Pitch Vertical PreWired Crimped (Alt: MM-212-009-161-00W1) RoHS : Compliant | 5 | |||
| MM-213-009-161-45WQ | Molex | AirBorn M Series MicroD Cable Mount Plug 0050 127mm Pitch Vertical PreWired Crimped (Alt: MM-213-009-161-45WQ) RoHS : Not Compliant | 5 | |||
| MM-212-009-161-00WQ | Molex | AirBorn M Series MicroD Cable Mount Plug 0050 127mm Pitch Vertical PreWired Crimped (Alt: MM-212-009-161-00WQ) RoHS : Compliant | 5 | |||
| MM-312-069-161-45WQ | Molex | AirBorn M Series MicroD Cable Mount Plug 0050 127mm Pitch Vertical PreWired Crimped (Alt: MM-312-069-161-45WQ) RoHS : Compliant | 5 | |||
| MM-212-009-161-00W2 | Molex | AirBorn M Series MicroD Cable Mount Plug 0050 127mm Pitch Vertical PreWired Crimped (Alt: MM-212-009-161-00W2) RoHS : Compliant | 5 | |||
| MM-212-009-161-41WC | Molex | AirBorn M Series MicroD Cable Mount Plug 0050 127mm Pitch Vertical PreWired Crimped (Alt: MM-212-009-161-41WC) RoHS : Compliant | 5 | |||
Avnet Asia | BCP69-16,115 | Nexperia | Trans GP BJT PNP 20V 2A 4-Pin(3+Tab) SOT-223 T/R (Alt: BCP69-16,115) RoHS : Compliant | 0 | ||
| FDS89161LZ | onsemi | Dual N-Channel Shielded Gate PowerTrench? MOSFET 100V, 2.7A, 105mO (Alt: FDS89161LZ) RoHS : Compliant | 0 | |||
0031.9161 | Schurter Electronic Components | (Alt: 0031.9161) RoHS : Compliant | 0 | |||
| 91614-403ALF | Amphenol Corporation | (Alt: 91614-403ALF) RoHS : Compliant | 0 | |||
| BC869-16,115 | Nexperia | Trans GP BJT PNP 20V 2A 4-Pin(3+Tab) SOT-89 T/R (Alt: BC869-16,115) RoHS : Compliant | 0 | |||
| 91618-312ALF | Amphenol Corporation | (Alt: 91618-312ALF) RoHS : Compliant | 0 | |||
| NRF9161-DK | Nordic Semiconductor | Devkits for LTE system-in-package ICs (Alt: NRF9161-DK) RoHS : Compliant | 0 | |||
| 91614-310GLF | Amphenol Corporation | (Alt: 91614-310GLF) RoHS : Compliant | 0 | |||
| NRF9161-LACA-R7 | Nordic Semiconductor | Low Power Cellular IoT SIP, LTE-M, NB-IoT, GNSS wireless modem, Compatible with nRF Cloud Services (Alt: NRF9161-LACA-R7) RoHS : Compliant | 0 | |||
| 91614-306ALF | Amphenol Corporation | (Alt: 91614-306ALF) RoHS : Compliant | 0 | |||
| 0015916103 | Molex | Pin Header, 10 Contacts, 2 Rows, 2.54 mm, Gold, Copper Alloy, PCB Header, Straight, LCP, Unshrouded (Alt: 0015916103) RoHS : Compliant | 0 | |||
| FDS89161 | onsemi | Dual N-Channel Shielded Gate PowerTrench? MOSFET 100V, 2.7A, 105mO (Alt: FDS89161) RoHS : Compliant | 0 | |||
| 91615-306ALF | Amphenol Corporation | (Alt: 91615-306ALF) RoHS : Compliant |
| 0 | ||
| TLX9161T(TPL,F(O | Toshiba America Electronic Components | (Alt: TLX9161T(TPL,F(O) RoHS : Compliant | 0 | |||
| 177916-1 | TE Connectivity | (Alt: 177916-1) RoHS : Compliant |
| 0 | ||
 Avnet Silica | NRF9161-DK | Nordic Semiconductor | Devkits for LTE systeminpackage ICs (Alt: NRF9161-DK) RoHS : Compliant | 34 | ||
| FDS89161LZ | onsemi | Dual NChannel Shielded Gate PowerTrench MOSFET 100V 27A 105mO (Alt: FDS89161LZ) RoHS : Compliant | 0 | |||
| FDS89161 | onsemi | Dual NChannel Shielded Gate PowerTrench MOSFET 100V 27A 105mO (Alt: FDS89161) RoHS : Compliant | 0 | |||
| MP9161AGJ-Z | Monolithic Power Systems | (Alt: MP9161AGJ-Z) RoHS : Compliant | 0 | |||
| BCP69-16,115 | Nexperia | Trans GP BJT PNP 20V 2A 4Pin3Tab SOT223 TR (Alt: BCP69-16,115) RoHS : Compliant | 0 | |||
| BC869-16,115 | Nexperia | Trans GP BJT PNP 20V 2A 4Pin3Tab SOT89 TR (Alt: BC869-16,115) RoHS : Compliant | 0 | |||
| TEA19161T/2Y | NXP Semiconductors | Digital Controller 16Pin SOIC TR (Alt: TEA19161T/2Y) RoHS : Compliant | 0 | |||
| TEA19161CT/1Y | NXP Semiconductors | Power Factor Correction PWM Controller 148KHz 8Pin SOIC (Alt: TEA19161CT/1Y) RoHS : Compliant | 0 | |||
| NRF9161-LACA-R | Nordic Semiconductor | Low Power Cellular IoT SIP LTEM NBIoT GNSS wireless modem Compatible with nRF Cloud Services (Alt: NRF9161-LACA-R) RoHS : Compliant | 0 | |||
| NRF9161-LACA-R7 | Nordic Semiconductor | Low Power Cellular IoT SIP LTEM NBIoT GNSS wireless modem Compatible with nRF Cloud Services (Alt: NRF9161-LACA-R7) RoHS : Compliant | 0 | |||
| NEX91615PB-Q100Y | Nexperia | LDO Voltage Regulator Adjustable 4 to 40V in 220mV Drop 2 to 40V 015A HSOIC8 (Alt: NEX91615PB-Q100Y) RoHS : Compliant | 0 | |||
| CP19161_AMY-35-S-B2 | LEDIL | (Alt: CP19161_AMY-35-S-B2) RoHS : Compliant | 0 | |||
| RV1S9161ACCSP-100C#SC0 | Renesas Electronics Corporation | (Alt: RV1S9161ACCSP-100C#SC0) RoHS : Compliant | 0 | |||
| RV1S9161ACCSP-100C#KC0 | Renesas Electronics Corporation | (Alt: RV1S9161ACCSP-100C#KC0) RoHS : Compliant | 0 | |||
| RV1S9161ACCSP-100V#SC0 | Renesas Electronics Corporation | (Alt: RV1S9161ACCSP-100V#SC0) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | NRF9161-DK | Nordic Semiconductor | NRF9161 Dev Kit |
| 1 | |
| NRF9161-LACA-R7 | Nordic Semiconductor | Low power SiP with integrated LTE-M/NB-IoT with GNSS and DECT NR+ modem |
| 0 | ||
| NRF9161-LACA-R | Nordic Semiconductor | Low power SiP with integrated LTE-M/NB-IoT with GNSS and DECT NR+ modem |
| 0 | ||
 Component Electronics, Inc | 2238-916-19849 | Philips Semiconductors | IN STOCK SHIP TODAY |
| 57,069 | |
| 2238-916-15649 | YAGEO Corporation | IN STOCK SHIP TODAY |
| 9,995 | ||
| 2238-916-15654 | YAGEO Corporation | IN STOCK SHIP TODAY |
| 3,800 | ||
| 9-1614354-2 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 650 | ||
| 1-916113-5 | IN STOCK SHIP TODAY |
| 145 | |||
| HM91610A | IN STOCK SHIP TODAY |
| 92 | |||
| ICS9161A-01CWT | ICS | IN STOCK SHIP TODAY |
| 40 | ||
| M22759/16-16-2 | Harbour Industries | IN STOCK SHIP TODAY |
| 40 | ||
| DCP69-16-13 | Diodes Incorporated | IN STOCK SHIP TODAY RoHS : Compliant |
| 24 | ||
| HM91610B | IN STOCK SHIP TODAY | 10 | ||||
| 539161 | Festo | IN STOCK SHIP TODAY |
| 8 | ||
| 507-3916-1473-600 | Dialight | IN STOCK SHIP TODAY |
| 4 | ||
| M22759/16-12-3 | Harbour Industries | IN STOCK SHIP TODAY |
| 2 | ||
| M22759/16-16-1 | Thermax | IN STOCK SHIP TODAY |
| 1 | ||
| M22759/16-12-1 | Harbour Industries | IN STOCK SHIP TODAY |
| 1 | ||
 DB Roberts | HXN9/16-12-STL-ZI | HEX NUT | Hex Nut STEEL ZINC |
| 23,700 | |
| HHC9/16-12X1-3/4-GR5-STL | HEX HEAD CAP SCREW | Hex Head Cap Screw |
| 599 | ||
| HXN9/16-18-JAM-SS | HEX NUT | Hex Nut STAINLESS |
| 53 | ||
| HHC9/16-18X2-1/4-SS | HEX HEAD CAP SCREW |
| 50 | |||
| PK-29-16-13-KD1125 | Southco | These lock plugs purchased independently from their matching latches offer OEMs and end users the ability to tailor key code assignments according to application needs. Lock plugs can be installed or replaced after latch installation. Multiple key code | 0 | |||
| PK-29-16-13-KD1050 | Southco | These lock plugs purchased independently from their matching latches offer OEMs and end users the ability to tailor key code assignments according to application needs. Lock plugs can be installed or replaced after latch installation. Multiple key code | 0 | |||
| RRWA-91618-100 | Essentra Components | 0 | ||||
| TSSP9/16-18A | Essentra Components | 916-18 UNF SEALING THRD PLUGNY | 0 | |||
| RRWA-91616-100 | Essentra Components | 0 | ||||
| LCBS-9-16-19 | Essentra Components | 0 | ||||
| PK-29-16-13-MK1125 | Southco | These lock plugs purchased independently from their matching latches offer OEMs and end users the ability to tailor key code assignments according to application needs. Lock plugs can be installed or replaced after latch installation. Multiple key code | 0 | |||
| E3-129-161 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| PK-29-16-13-MK1010 | Southco | These lock plugs purchased independently from their matching latches offer OEMs and end users the ability to tailor key code assignments according to application needs. Lock plugs can be installed or replaced after latch installation. Multiple key code | 0 | |||
| PK-29-16-13-MK1050 | Southco | These lock plugs purchased independently from their matching latches offer OEMs and end users the ability to tailor key code assignments according to application needs. Lock plugs can be installed or replaced after latch installation. Multiple key code | 0 | |||
| 9161 | Heyco | PRH 122-118 WHITE | 0 | |||
 EBV Elektronik | FDS89161LZ | onsemi | Dual NChannel Shielded Gate PowerTrench MOSFET 100V 27A 105mO (Alt: FDS89161LZ) RoHS : Compliant | 0 | ||
| FDS89161 | onsemi | Dual NChannel Shielded Gate PowerTrench MOSFET 100V 27A 105mO (Alt: FDS89161) RoHS : Compliant | 0 | |||
| TEA19161T/2Y | NXP Semiconductors | Digital Controller 16Pin SOIC TR (Alt: TEA19161T/2Y) RoHS : Compliant | 0 | |||
| TEA19161CT/1Y | NXP Semiconductors | Power Factor Correction PWM Controller 148KHz 8Pin SOIC (Alt: TEA19161CT/1Y) RoHS : Compliant | 0 | |||
| TLE49161KHTSA1 | Infineon Technologies AG | Hall Effect Sensor 2mA Latch 24V to 5V 3Pin SC59 TR (Alt: SP000649954) RoHS : Compliant | 0 | |||
| 5962-9161709VZC | Microchip Technology Inc | SRAM Chip Async Dual 5V 128Kbit 8K X 16 30ns 84Pin MQFPF (Alt: 5962-9161709VZC) RoHS : Not Compliant | 0 | |||
| CP19161_AMY-35-S-B2 | LEDIL | (Alt: CP19161_AMY-35-S-B2) RoHS : Compliant | 0 | |||
 ECCO | 97-79-161 | Amphenol Industrial Operations |
| 236 | ||
| 97-79-161 | Amphenol Industrial Operations |
| 236 | |||
 Maritex | 2-962916-1 | TE Connectivity | Rectangular Connector Contacts; 2-962916-1; TE CONNECTIVITY; Tin; Crimp; 15 AWG; 13 AWG RoHS : Compliant |
| 9,421 | |
| 1-1670916-1 | TE Connectivity | Automotive Connectors; 1-1670916-1; TE CONNECTIVITY; Black; 2; Yes; 15 mm RoHS : Compliant |
| 2,600 | ||
 Master Electronics | 4-1191613-8 | TE Connectivity | High Performance Cable 1Conductors 20AWG 1.27mm Silver Plated Copper 600VAC RoHS : Compliant |
| 0 | |
| 11191613-00 | TE Connectivity | AST4200J00100P4E1000:CTO-13000000-02 MOQ Reduction RoHS : Compliant |
| 0 | ||
| 8-1191617-7 | TE Connectivity | FLHTC0311-26-9 RoHS : Compliant |
| 0 | ||
| 858916-1 | TE Connectivity | RECEPTACLE MOQ Reduction RoHS : Compliant |
| 0 | ||
| 9-1614349-4 | TE Connectivity | RN 0603 7R5 0.1% 10PPM 1K RL RoHS : Compliant |
| 0 | ||
| 9-1614351-1 | TE Connectivity | RN 0603 49R9 0.1% 10PPM 1K RL RoHS : Compliant |
| 0 | ||
| 9-1614707-6 | TE Connectivity | RN 1206 3K01 0.1% 10PPM 5K RL MOQ Reduction RoHS : Compliant |
| 0 | ||
| 9-1614887-7 | TE Connectivity | Thin Film Resistor - SMD 0805 - 4.42 Kohm (+/-) 0.1% - 1/10 W - 100V - TCR (+/-) 25ppm/°C - -55°C to +155°C - Tape&Reel RoHS : Compliant |
| 0 | ||
| 9-1614964-1 | TE Connectivity | CPF 1206 2K4 0.1% 25PPM 1K RL RoHS : Compliant |
| 0 | ||
| 9-1614970-4 | TE Connectivity | CPF 1206 7R87 0.1% 25PPM 1K RL RoHS : Compliant |
| 0 | ||
| 9-1616154-8 | TE Connectivity | 13621010=COVER RoHS : Compliant |
| 0 | ||
| 9-1616203-3 | TE Connectivity | 24685070=ACTUATOR ASSEMBLY- SU RoHS : Not Compliant |
| 0 | ||
| 9-1616231-2 | TE Connectivity | 30758020 TE Connectivity / Hartman MOQ Reduction RoHS : Not Compliant |
| 0 | ||
| 9-1616235-8 | TE Connectivity | 31160010=TERMINAL SHIELD ASSY MOQ Reduction RoHS : Not Compliant |
| 0 | ||
| 9-1616968-5 | TE Connectivity | BP494G1= Contactor - 3PST NO Sidestable MOQ Reduction RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE91613 | Pasternack Enterprises | Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: 3.5mm, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 26.5 GHz, Adapter Body Style: Straight, Connector Mount Method 1: None, Connector Body Material 1: Stainless Steel, Connector Body Plating 1: Passivated Stainless Steel, Connector Mount Method 2: None, Connector Body Material 2: Stainless Steel, Connector Body Plating 2: Passivated Stainless Steel. 3.5mm Female to 3.5mm Female Adapter, Stainless Steel, Engineering Grade. 3.5mm adapter PE91613 is one of our available RF, microwave and millimeter wave components from Pasternack. The RF adapter comes with 50 Ohm impedance. This RF adapter has a female to female gender configuration which provides easier connections in tighter spaces. Our 3.5mm to 3.5mm adapter is an engineering grade coaxial adapter design. This 50 Ohm 3.5mm adapter is precision manufactured to RF components industry specifications and has a maximum frequency of 26.5 GHz. 3.5mm female to 3.5mm female adapter is one of the many RF components that ship same business day as they are ordered. PE91613 female 3.5mm to female 3.5mm adapter has a straight body. This Pasternack straight 3.5mm coax adapter is an in-line RF adapter. Pasternack’s engineering grade adapter has a typical VSWR of 1.25 and is designed for repeated use in prototyping and lab applications for RF and microwave systems without performance degradation. Our RF adapter comes with a typical insertion loss of 0.257 dB at 26.5 GHz and is ideal to use in RF and microwave systems. Our 3.5mm female to 3.5mm female adapter PE91613 is shipped from our facility the same business day as purchased. The high-quality adapter from Pasternack is made from stainless steel connector body and has a beryllium copper center contact. Our 3.5mm radio frequency adapter can also be used to protect connectors on expensive equipment where the number of connect/ disconnect cycles is high. This female engineering grade RF adapter has an operating temperature range of -55 to 105 degrees C. This 3.5mm to 3.5mm radio frequency adapter is part of our RF, microwave and millimeter wave products that ship the same business day as ordered worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality 26.5 GHz radio frequency adapter with that meets your requirements. |
| 128 | |
| PE3C4916-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length: 12 inches. Slide-On BMA Jack 2 Hole Flange to TNC Male Cable 12 Inch Length Using PE-SR402FLJ Coax., Radio frequency assembly slide-on BMA jack 2 hole flange to TNC male cable 12 inch length using PE-SR402FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA jack 2 hole flange to TNC male cable 12 inch length using PE-SR402FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA 2 hole flange cable connection on one end and TNC cable connection on the other. Our BMA to TNC cable assemblies have a jack gender on end 1 and male on end 2. This BMA to TNC cable is a jack to male coax assembly, PE3C4916-12, can also be known as a BMA female to TNC plug cable assembly and will be shipped same-day as it is purchased. BMA female to TNC plug cable assembly PE3C4916-12 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable BMA cable assembly is manufactured with BMA to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BMA jack 2 hole flange to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4916-12 can also be used in the other direction and will be TNC male to BMA jack 2 hole flange cable assembly if the opposite connectivity is required. BMA female 2 hole flange to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to TNC cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA jack 2 hole flange to TNC male cable 12 inch length using PE-SR402FLJ coax. |
| 84 | ||
| PE91619 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 40 GHz, Adapter Body Style: Straight, Connector Body Material 1: Stainless Steel, Connector Body Plating 1: Passivated, Connector Body Material 2: Stainless Steel, Connector Body Plating 2: Passivated. 2.92mm Male to 1.85mm Female Adapter, Stainless Steel, Engineering Grade. 2.92mm to 1.85mm engineering grade adapter PE91619 is one of our available RF, microwave and millimeter wave components from Pasternack. The RF adapter comes with 50 Ohm impedance and maximum VSWR of 1.25:1. This RF adapter has a male to female gender configuration which provides easier connections in tighter spaces. 2.92mm to 1.85mm adapter is an between series engineering grade adapter designed for repeated use in prototyping and lab applications for RF and microwave systems without performance degradation. This 50 Ohm 2.92mm adapter is precision manufactured to RF components industry specifications and has a maximum frequency of 40 GHz. 2.92mm male to 1.85mm female adapter is one of the many RF components that ship same business day as they are ordered. PE91619 male 2.92mm to female 1.85mm adapter has a straight body. This Pasternack straight 2.92mm coax adapter is an in-line RF adapter in a engineering grade design. This 1.25:1 RF adapters is often used to enable connections between two connector types that would otherwise not mate. Our RF adapter comes with a maximum insertion loss of 0.316 dB at 40 GHz and is ideal to use in RF and microwave systems. Our engineering grade RF adapters has 0.95 in. length, 0.31 in. width and 0.06 lbs weight. The high-quality adapter from Pasternack is made from stainless steel connector body and has a beryllium copper center contact. Our 2.92mm radio frequency adapter can also be used to protect connectors on expensive equipment where the number of connect/ disconnect cycles is high. This male RF adapter has an operating temperature range of -55 to 105 degrees C. This 2.92mm to 1.85mm radio frequency engineering grade adapter is part of RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality 40 GHz radio frequency adapter that meets your requirements. |
| 60 | ||
| PE91617 | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.85mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.4mm, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 50 GHz, Adapter Body Style: Straight, Connector Body Material 1: Stainless Steel, Connector Body Plating 1: Passivated, Connector Body Material 2: Stainless Steel, Connector Body Plating 2: Passivated. 1.85mm Female to 2.4mm Female Adapter, Stainless Steel, Engineering Grade. 1.85mm to 2.4mm engineering grade adapter PE91617 is one of our available RF, microwave and millimeter wave components from Pasternack. The RF adapter comes with 50 Ohm impedance and maximum VSWR of 1.3:1. This RF adapter has a female to female gender configuration which provides easier connections in tighter spaces. 1.85mm to 2.4mm adapter is an between series engineering grade adapter designed for repeated use in prototyping and lab applications for RF and microwave systems without performance degradation. This 50 Ohm 1.85mm adapter is precision manufactured to RF components industry specifications and has a maximum frequency of 50 GHz. 1.85mm female to 2.4mm female adapter is one of the many RF components that ship same business day as they are ordered. PE91617 female 1.85mm to female 2.4mm adapter has a straight body. This Pasternack straight 1.85mm coax adapter is an in-line RF adapter in a engineering grade design. This 1.3:1 RF adapters is often used to enable connections between two connector types that would otherwise not mate. Our RF adapter comes with a maximum insertion loss of 0.424 dB at 50 GHz and is ideal to use in RF and microwave systems. Our engineering grade RF adapters has 0.88 in. length, 0.31 in. width and 0.08 lbs weight. The high-quality adapter from Pasternack is made from stainless steel connector body and has a beryllium copper center contact. Our 1.85mm radio frequency adapter can also be used to protect connectors on expensive equipment where the number of connect/ disconnect cycles is high. This female RF adapter has an operating temperature range of -65 to 165 degrees C. This 1.85mm to 2.4mm radio frequency engineering grade adapter is part of RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality 50 GHz radio frequency adapter that meets your requirements. |
| 54 | ||
| PE91618 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 40 GHz, Adapter Body Style: Straight, Connector Body Material 1: Stainless Steel, Connector Body Plating 1: Passivated, Connector Body Material 2: Stainless Steel, Connector Body Plating 2: Passivated. 2.92mm Male to 1.85mm Male Adapter, Stainless Steel, Engineering Grade. 2.92mm to 1.85mm engineering grade adapter PE91618 is one of our available RF, microwave and millimeter wave components from Pasternack. The RF adapter comes with 50 Ohm impedance and maximum VSWR of 1.25:1. This RF adapter has a male to male gender configuration which provides easier connections in tighter spaces. 2.92mm to 1.85mm adapter is an between series engineering grade adapter designed for repeated use in prototyping and lab applications for RF and microwave systems without performance degradation. This 50 Ohm 2.92mm adapter is precision manufactured to RF components industry specifications and has a maximum frequency of 40 GHz. 2.92mm male to 1.85mm male adapter is one of the many RF components that ship same business day as they are ordered. PE91618 male 2.92mm to male 1.85mm adapter has a straight body. This Pasternack straight 2.92mm coax adapter is an in-line RF adapter in a engineering grade design. This 1.25:1 RF adapters is often used to enable connections between two connector types that would otherwise not mate. Our RF adapter comes with a maximum insertion loss of 0.316 dB at 40 GHz and is ideal to use in RF and microwave systems. Our engineering grade RF adapters has 0.99 in. length, 0.31 in. width and 0.01 lbs weight. The high-quality adapter from Pasternack is made from stainless steel connector body and has a beryllium copper center contact. Our 2.92mm radio frequency adapter can also be used to protect connectors on expensive equipment where the number of connect/ disconnect cycles is high. This male RF adapter has an operating temperature range of -55 to 105 degrees C. This 2.92mm to 1.85mm radio frequency engineering grade adapter is part of RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality 40 GHz radio frequency adapter that meets your requirements. |
| 47 | ||
| PE3W02916-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Reverse Polarity SMA Plug to N Female 4 Hole Flange Cable 12 Inch Length Using RG142 Coax., Radio frequency assembly reverse polarity SMA plug to N female 4 hole flange cable 12 inch length using RG142 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Reverse polarity SMA plug to N female 4 hole flange cable 12 inch length using RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with reverse polarity SMA cable connection on one end and type N 4 hole flange cable connection on the other. Our reverse polarity SMA to N type cable assembly has plug gender on end 1 and female on end 2. PE3W02916-12 can also be known as a reverse polarity SMA male to type N jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.000 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. Reverse polarity SMA male to type N jack cable assembly PE3W02916-12 is built with RG142 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to N type cable connectors, has a 50 Ohm impedance and is double shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has crimp/solder attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE3W02916-12 RF cable are available on our downloadable PDF datasheet.PE3W02916-12 can also be used in the other direction and will be type N female 4 hole flange to reverse polarity SMA plug cable assembly if the opposite connectivity is required. SMA reverse polarity male to type N jack 4 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to N type cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. |
| 31 | ||
| PE91616 | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.85mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.4mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 50 GHz, Adapter Body Style: Straight, Connector Body Material 1: Stainless Steel, Connector Body Plating 1: Passivated, Connector Body Material 2: Stainless Steel, Connector Body Plating 2: Passivated. 1.85mm Female to 2.4mm Male Adapter, Stainless Steel, Engineering Grade. 1.85mm to 2.4mm engineering grade adapter PE91616 is one of our available RF, microwave and millimeter wave components from Pasternack. The RF adapter comes with 50 Ohm impedance and maximum VSWR of 1.3:1. This RF adapter has a female to male gender configuration which provides easier connections in tighter spaces. 1.85mm to 2.4mm adapter is an between series engineering grade adapter designed for repeated use in prototyping and lab applications for RF and microwave systems without performance degradation. This 50 Ohm 1.85mm adapter is precision manufactured to RF components industry specifications and has a maximum frequency of 50 GHz. 1.85mm female to 2.4mm male adapter is one of the many RF components that ship same business day as they are ordered. PE91616 female 1.85mm to male 2.4mm adapter has a straight body. This Pasternack straight 1.85mm coax adapter is an in-line RF adapter in a engineering grade design. This 1.3:1 RF adapters is often used to enable connections between two connector types that would otherwise not mate. Our RF adapter comes with a maximum insertion loss of 0.424 dB at 50 GHz and is ideal to use in RF and microwave systems. Our engineering grade RF adapters has 0.96 in. length, 0.31 in. width and 0.12 lbs weight. The high-quality adapter from Pasternack is made from stainless steel connector body and has a beryllium copper center contact. Our 1.85mm radio frequency adapter can also be used to protect connectors on expensive equipment where the number of connect/ disconnect cycles is high. This female RF adapter has an operating temperature range of -65 to 165 degrees C. This 1.85mm to 2.4mm radio frequency engineering grade adapter is part of RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality 50 GHz radio frequency adapter that meets your requirements. |
| 24 | ||
| PE91610 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.92mm, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 40 GHz, Adapter Body Style: Straight, Connector Mount Method 1: None, Connector Body Material 1: Stainless Steel, Connector Body Plating 1: Passivated Stainless Steel, Connector Mount Method 2: None, Connector Body Material 2: Stainless Steel, Connector Body Plating 2: Passivated Stainless Steel. 2.92mm Female to 2.92mm Female Adapter, Stainless Steel, Engineering Grade. 2.92mm adapter PE91610 is one of our available RF, microwave and millimeter wave components from Pasternack. The RF adapter comes with 50 Ohm impedance. This RF adapter has a female to female gender configuration which provides easier connections in tighter spaces. Our 2.92mm to 2.92mm adapter is an engineering grade coaxial adapter design. This 50 Ohm 2.92mm adapter is precision manufactured to RF components industry specifications and has a maximum frequency of 40 GHz. 2.92mm female to 2.92mm female adapter is one of the many RF components that ship same business day as they are ordered. PE91610 female 2.92mm to female 2.92mm adapter has a straight body. This Pasternack straight 2.92mm coax adapter is an in-line RF adapter. Pasternack’s engineering grade adapter has a typical VSWR of 1.25 and is designed for repeated use in prototyping and lab applications for RF and microwave systems without performance degradation. Our RF adapter comes with a typical insertion loss of 0.316 dB at 40 GHz and is ideal to use in RF and microwave systems. Our 2.92mm female to 2.92mm female adapter PE91610 is shipped from our facility the same business day as purchased. The high-quality adapter from Pasternack is made from stainless steel connector body and has a beryllium copper center contact. Our 2.92mm radio frequency adapter can also be used to protect connectors on expensive equipment where the number of connect/ disconnect cycles is high. This female engineering grade RF adapter has an operating temperature range of -55 to 105 degrees C. This 2.92mm to 2.92mm radio frequency adapter is part of our RF, microwave and millimeter wave products that ship the same business day as ordered worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality 40 GHz radio frequency adapter with that meets your requirements. |
| 22 | ||
| PE91612 | Pasternack Enterprises | Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: 3.5mm, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 26.5 GHz, Adapter Body Style: Straight, Connector Mount Method 1: None, Connector Body Material 1: Stainless Steel, Connector Body Plating 1: Passivated Stainless Steel, Connector Mount Method 2: None, Connector Body Material 2: Stainless Steel, Connector Body Plating 2: Passivated Stainless Steel. 3.5mm Male to 3.5mm Female Adapter, Stainless Steel, Engineering Grade. 3.5mm adapter PE91612 is one of our available RF, microwave and millimeter wave components from Pasternack. The RF adapter comes with 50 Ohm impedance. This RF adapter has a male to female gender configuration which provides easier connections in tighter spaces. Our 3.5mm to 3.5mm adapter is an engineering grade coaxial adapter design. This 50 Ohm 3.5mm adapter is precision manufactured to RF components industry specifications and has a maximum frequency of 26.5 GHz. 3.5mm male to 3.5mm female adapter is one of the many RF components that ship same business day as they are ordered. PE91612 male 3.5mm to female 3.5mm adapter has a straight body. This Pasternack straight 3.5mm coax adapter is an in-line RF adapter. Pasternack’s engineering grade adapter has a typical VSWR of 1.25 and is designed for repeated use in prototyping and lab applications for RF and microwave systems without performance degradation. Our RF adapter comes with a typical insertion loss of 0.257 dB at 26.5 GHz and is ideal to use in RF and microwave systems. Our 3.5mm male to 3.5mm female adapter PE91612 is shipped from our facility the same business day as purchased. The high-quality adapter from Pasternack is made from stainless steel connector body and has a beryllium copper center contact. Our 3.5mm radio frequency adapter can also be used to protect connectors on expensive equipment where the number of connect/ disconnect cycles is high. This male engineering grade RF adapter has an operating temperature range of -55 to 105 degrees C. This 3.5mm to 3.5mm radio frequency adapter is part of our RF, microwave and millimeter wave products that ship the same business day as ordered worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality 26.5 GHz radio frequency adapter with that meets your requirements. |
| 0 | ||
| PE3916-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMB Plug Right Angle to SMB Plug Right Angle Cable 12 Inch Length Using RG174 Coax., Radio frequency assembly SMB plug right angle to SMB plug right angle cable 12 inch length using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMB plug right angle to SMB plug right angle cable 12 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to SMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMB cable connection on one end and right angle SMB cable connection on the other. Our right angle SMB to right angle SMB cable assemblies have a plug gender on end 1 and plug on end 2. This SMB to SMB cable is a plug to plug coax assembly, PE3916-12, can also be known as a right angle SMB male to right angle SMB male cable assembly and will be shipped same-day as it is purchased. SMB male to SMB male cable assembly PE3916-12 is built with RG174 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with right angle SMB to right angle SMB cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency SMB right angle plug to SMB right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMB right angle male to SMB right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to SMB cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMB plug right angle to SMB plug right angle cable 12 inch length using RG174 coax. |
| 0 | ||
| PE3W09161 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm. 2.92mm Male to SMA Male Right Angle Cable Using PE-047SR Coax. PE3W09161 is a 2.92mm male to SMA male right angle cable using PE-047SR coax. This Pasternack 2.92mm male to SMA male right angle cable assembly uses a 50 Ohm 2.92mm for connector 1 and a 50 Ohm SMA for connector 2. 2.92mm to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 2.92mm to male SMA right angle cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W09161 2.92mm male to SMA male right angle cable assembly is constructed with PE-047SR coax. | 0 | |||
| PE3C3916-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: HN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG217/U, RF Cable Type: RG217, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. HN Male to HN Male Right Angle Cable 12 Inch Length Using RG217 Coax., Radio frequency assembly HN male to HN male right angle cable 12 inch length using RG217 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The HN male to HN male right angle cable 12 inch length using RG217 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HN to HN cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with HN cable connection on one end and right angle HN cable connection on the other. Our HN to right angle HN cable assembly has male gender on end 1 and male on end 2. PE3C3916-12 can also be known as a HN plug to right angle HN plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PE dielectric type. HN plug to HN plug cable assembly PE3C3916-12 is built with RG217 which is a flexible coax type. The Pasternack flexible HN cable assembly is manufactured with HN to right angle HN cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3C3916-12 RF cable are available on our downloadable PDF datasheet.PE3C3916-12 can also be used in the other direction and will be right angle HN male to HN male cable assembly if the opposite connectivity is required. HN plug to HN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HN to HN cable assembly for quick shipment worldwide. Variations of HN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal HN RF cable assembly as per your requirements. |
| 0 | ||
| PE3C3916-144 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: HN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG217/U, RF Cable Type: RG217, RF Cable Impedance: 50 Ohm, Length, Max: 144 inches. HN Male to HN Male Right Angle Cable 144 Inch Length Using RG217 Coax., Radio frequency assembly HN male to HN male right angle cable 144 inch length using RG217 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The HN male to HN male right angle cable 144 inch length using RG217 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HN to HN cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with HN cable connection on one end and right angle HN cable connection on the other. Our HN to right angle HN cable assembly has male gender on end 1 and male on end 2. PE3C3916-144 can also be known as a HN plug to right angle HN plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PE dielectric type. HN plug to HN plug cable assembly PE3C3916-144 is built with RG217 which is a flexible coax type. The Pasternack flexible HN cable assembly is manufactured with HN to right angle HN cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3C3916-144 RF cable are available on our downloadable PDF datasheet.PE3C3916-144 can also be used in the other direction and will be right angle HN male to HN male cable assembly if the opposite connectivity is required. HN plug to HN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HN to HN cable assembly for quick shipment worldwide. Variations of HN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal HN RF cable assembly as per your requirements. |
| 0 | ||
| PE3W19161 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm. 2.92mm Female 4 Hole Flange to 1.85mm Male Cable Using PE-047SR Coax. PE3W19161 is a 2.92mm female 4 hole flange to 1.85mm male cable using PE-047SR coax. This Pasternack 2.92mm female 4 hole flange to 1.85mm male cable assembly uses a 50 Ohm 2.92mm for connector 1 and a 50 Ohm 1.85mm for connector 2. Our female 2.92mm 4 hole flange to male 1.85mm cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W19161 2.92mm female 4 hole flange to 1.85mm male cable assembly is constructed with PE-047SR coax. | 0 | |||
| PE3C9161 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: 2 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm. Slide-On BMA Jack Right Angle 2 Hole Flange to Slide-On BMA Jack Right Angle 2 Hole Flange Cable Using Tinned RG405 Coax. PE3C9161 is a BMA jack right angle 2 hole flange to BMA jack right angle 2 hole flange cable using RG405 Tinned coax. This Pasternack BMA jack right angle 2 hole flange to BMA jack right angle 2 hole flange cable assembly uses a 50 Ohm BMA for connector 1 and a 50 Ohm BMA for connector 2. BMA right angle to BMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our jack BMA right angle 2 hole flange to jack BMA right angle2 hole flange cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3C9161 BMA jack right angle 2 hole flange to BMA jack right angle 2 hole flange cable assembly is constructed with RG405 Tinned coax. | 0 | |||
 Teledyne HiRel | 5962-9161001MLA | Teledyne HiRel | FLIP-FLOP, D-TYPE, 9-BIT, POS. EDGE-TRIGGERED, TTL-COMP INPUTS, TS-OUTPUTS RoHS : Not Compliant | 0 | ||
5962-9161101M3A | Teledyne HiRel | FLIP-FLOP, D-TYPE, 8-BIT, TTL-COMPATIBLE INPUTS, POSITIVE EDGE-TRIGGERED RoHS : Not Compliant | 0 | |||
5962-9161001MKA | Teledyne HiRel | FLIP-FLOP, D-TYPE, 9-BIT, POS. EDGE-TRIGGERED, TTL-COMP INPUTS, TS-OUTPUTS RoHS : Not Compliant | 0 | |||
| 5962-9161101MLA | Teledyne HiRel | FLIP-FLOP, D-TYPE, 8-BIT, TTL-COMPATIBLE INPUTS, POSITIVE EDGE-TRIGGERED RoHS : Not Compliant | 0 | |||
| 5962-9161001M3A | Teledyne HiRel | FLIP-FLOP, D-TYPE, 9-BIT, POS. EDGE-TRIGGERED, TTL-COMP INPUTS, TS-OUTPUTS RoHS : Not Compliant | 0 | |||
| 5962-9161101MKA | Teledyne HiRel | FLIP-FLOP, D-TYPE, 8-BIT, TTL-COMPATIBLE INPUTS, POSITIVE EDGE-TRIGGERED RoHS : Not Compliant | 0 | |||
 Vyrian | DCP69-16-13 | Diodes Incorporated | Power Bipolar Transistor, 1A I(C), 20V V(BR)CEO, 1-Element, PNP, Silicon, Plastic/Epoxy, 4 Pin | 14,525 | ||
| 9-1617752-3 | TE Connectivity | Power/Signal Relay, 3PDT, Momentary, 28VDC (Coil), 25A (Contact), AC/DC Output, Panel Mount RoHS : Not Compliant | 10,875 | |||
| T1619161120-000 | TE Connectivity | Connector Accessory, Aluminum Alloy RoHS : Compliant | 8,959 | |||
| 9-1618389-8 | TE Connectivity | Power/Signal Relay, 1 Form X, SPST-NO-DM, 24VDC (Coil), 100A (Contact), 900VDC (Contact), DC Input, Panel Mount RoHS : Compliant | 8,853 | |||
| BC869-16,135 | Nexperia | Small Signal Bipolar Transistor, 2A I(C), 20V V(BR)CEO, 1-Element, PNP, Silicon, TO-243AA | 8,339 | |||
| 34691-6162 | Molex | Telecom and Datacom Connector RoHS : Compliant | 7,557 | |||
| TLE49161KHTSA1 | Infineon Technologies AG | Hall Effect Sensor, -5mT Min, 5mT Max, -0.3-5.0V, Rectangular, Surface Mount RoHS : Compliant | 7,431 | |||
| PTLV9161QDCKRQ1 | Texas Instruments | 7,322 | ||||
| CDC9161DL | Texas Instruments | Clock Generator, CMOS, PDSO48 RoHS : Not Compliant | 7,057 | |||
| AD9161BBCZ | Analog Devices Inc | D/A Converter, 1 Func, Serial, Parallel, Word Input Loading, PBGA169 RoHS : Compliant | 6,244 | |||
| 9-1614884-2 | TE Connectivity | Fixed Resistor, Thin Film, 0.1W, 27000ohm, 100V, 0.1% +/-Tol, 25ppm/Cel, Surface Mount, 0805 RoHS : Compliant | 5,538 | |||
| 1625F9161 | Broadcom Limited | 5,288 | ||||
| UCC39161DPG4 | Texas Instruments | Power Supply Support Circuit, Fixed, 1 Channel, BICMOS, PDSO8 RoHS : Compliant | 5,032 | |||
| HSCH-9161 | Broadcom Limited | Mixer Diode, Zero Barrier, Millimeter Wave Band, 7500ohm Z(V) Max, Gallium Arsenide RoHS : Compliant | 4,749 | |||
| SNCDC9161DL | Texas Instruments | Processor Specific Clock Generator, 66MHz, CMOS, PDSO48 | 3,728 | |||
 Waytek, Inc. | AT62-209-16141 | Amphenol Sine Systems | AT/AHD-9 Female Nickel Socket Contact 14GA SIZE 16 Solid 0462-209-16141 |
| 133,259 | |
 Win Source Electronics | TEA19161T/2Y | Nexperia | IC PFC CTRLR DCM 500KHZ 16SO |
| 35,000 | |
| DM9161BEP | Davicom Semiconductor Inc | 10/100 Mbps Fast Ethernet Physical Layer Single Chip Transceiver RoHS : Compliant |
| 20,000 | ||
| TEA19161T | Nexperia | Digital controller for high-efficiency resonant power supply |
| 16,100 | ||
| SKY77916-11 | Skyworks Solutions Inc | IC / RF IC RoHS : Compliant |
| 16,000 | ||
| TEA19161T/2 | Nexperia |
| 15,450 | |||
| DM9161AEP | Davicom Semiconductor Inc | 10/100 Mbps Fast Ethernet Physical Layer Single Chip Transceiver RoHS : Compliant |
| 9,934 | ||
| DM9161BIEP | Davicom Semiconductor Inc | Industrial-grade 1/1 Mbps Fast Ethernet Physical Layer Single Chip Transceiver RoHS : Compliant |
| 5,200 | ||
| DM9161EP | Davicom Semiconductor Inc | 10/100 Mbps Fast Ethernet Physical Layer TX/FX Single Chip Transceiver RoHS : Compliant |
| 3,927 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼ 
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand