0012GVCK-R Price, Distributor, Stock

Installation terminal block; 1-level; through; 2-contacts for wire 0.5-1.5mm2 (20-16AWG); spring-loaded; blue; for DIN rail; 800V/13.5A
RoHS : Compliant

1,000 : $1.347
500 : $1.419
200 : $1.517
100 : $1.669
50 : $1.821
20 : $2.019
10 : $2.296
1 : $3.2246

AT62-20-0122

Amphenol Tuchel

Socket Contact #20, Stamped & Formed, 20-22 AWG, Nickel

1 : $0.257

1053001200

Molex

Rectangular Connector Contacts; 1053001200; MOLEX; Gold; Crimp; 24 AWG; 24 AWG
RoHS : Compliant

15,000 : $0.063
300 : $0.076
100 : $0.079
30 : $0.099
10 : $0.13
1 : $0.169

AS3813-E-0400-120-S

Ansen Quartz Co Ltd

Transformer; 1.8VA; 230VAC; 6V; 300mA; PCB

2000-1201

WAGO Innovative Connections

Installation terminal block; 1-level; through; 2-contacts for wire 0.5-1.5mm2 (20-16AWG); spring-loaded; grey; for DIN rail; 800V/13.5A
RoHS : Compliant

50 : $0.669
10 : $0.751
1 : $0.846

Pasternack Enterprises US

PE1001-2

Pasternack Enterprises

SOLDER IN HERMETIC SEALS A=.015 / B=.100 / C=.063 / D=.180 / E=.315.

1 : $12.49
25 : $11.87
50 : $11.24
100 : $10.74

1,002

PE3W10300-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 75 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm SMB Plug Right Angle to 75 Ohm SMB Plug Cable 12 Inch Length Using 75 Ohm RG59 Coax., Radio frequency assembly 75 Ohm SMB plug right angle to 75 Ohm SMB plug cable 12 inch length using 75 Ohm RG59 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm SMB plug right angle to 75 Ohm SMB plug cable 12 inch length using 75 Ohm RG59 coax, SMB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to SMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMB cable connection on one end and SMB cable connection on the other. Our right angle SMB to SMB cable assemblies have a plug gender on end 1 and plug on end 2. PE3W10300-12 can also be known as a right angle SMB male to SMB male cable assembly and will be shipped same-day as it is purchased. SMB male to SMB male cable assembly PE3W10300-12 is built with RG59 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with right angle SMB to SMB cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this SMB right angle plug to SMB plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10300-12 can also be used in the other direction and will be SMB plug to right angle SMB plug cable assembly if the opposite connectivity is required. SMB right angle male to SMB male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to SMB cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm SMB plug right angle to 75 Ohm SMB plug cable 12 inch length using 75 Ohm RG59 coax.

1 : $169.99
25 : $161.49
50 : $152.99
100 : $146.19

PE3W10100-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 7/16 DIN Female to 7/16 DIN Female Low Loss Cable 12 Inch Length Using LMR-400-UF Coax., Radio frequency assembly 7/16 DIN female to 7/16 DIN female low loss cable 12 inch length using LMR-400-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 7/16 DIN female to 7/16 DIN female low loss cable 12 inch length using LMR-400-UF coax, 7/16 DIN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with 7/16 DIN cable connection on one end and 7/16 DIN cable connection on the other. Our low loss 7/16 DIN to 7/16 DIN cable assemblies have a female gender on end 1 and female on end 2. PE3W10100-12 can also be known as a low loss 7/16 DIN jack to 7/16 DIN jack cable assembly and will be shipped same-day as it is purchased. 7/16 DIN jack to 7/16 DIN jack cable assembly PE3W10100-12 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 7/16 DIN female to 7/16 DIN female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss 7/16 DIN jack to 7/16 DIN jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN female to 7/16 DIN female low loss cable 12 inch length using LMR-400-UF coax.

1 : $344.99
25 : $327.74
50 : $310.49
100 : $296.69

PEW06S000-12

Pasternack Enterprises

Key Specifications, Waveguide Size 1: WR-6, Flange Size 1: UG-387/U-Mod, Waveguide Size 2: WR-6, Flange Size 2: UG-387/U-Mod, Length: 12 inches, Frequency, Min: 110 GHz, Frequency, Max: 170 GHz. WR-6 Straight Waveguide Section 12 Inch Length, UG-387/U-Mod Round Cover Flange from 110 GHz to 170 GHz. PEW06S000-12 WR-6 waveguide section is straight and is 12 inches long. Our straight WR-6 waveguide section with UG-387/U-Mod flange has a minimum frequency of 110 GHz and a maximum frequency of 170 GHz. WR-6 waveguide section PEW06S000-12 is part of over 40,000 RF, microwave and millimeter wave components.WR-6 straight waveguide section will ship same the day as it is purchased worldwide as with our other RF parts.

1 : $781.99
10 : $750.71
25 : $719.43
100 : $688.15

PE3CA2001-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: M17/176-00002, RF Cable Type: M17/176-00002, RF Cable Impedance: 78 Ohm, Length, Max: 24 inches. High Temperature 3-Slot Full Crimp Plug to Plug, 24 inch M17/176-00002 Twinax Cable., Radio frequency assembly high temperature 3-Slot full crimp plug to plug, 24 inch M17/176-00002 twinax cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The High temperature 3-Slot full crimp plug to plug, 24 inch M17/176-00002 twinax cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a plug gender on end 1 and plug on end 2. PE3CA2001-24 can also be known as a 1553 TRB male to TRB male cable assembly and will be shipped same-day as it is purchased. TRB male to TRB male cable assembly PE3CA2001-24 is built with M17/176-00002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRB plug to TRB plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB male to TRB male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this high temperature 3-Slot full crimp plug to plug, 24 inch M17/176-00002 twinax cable.

1 : $228.99
25 : $217.54
50 : $206.09
100 : $196.93

PE3W00120

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402TN, RF Cable Type: RG402 Tinned, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Cable Using Tinned RG402 Coax. PE3W00120 is a SMA male to SMA male cable using RG402 Tinned coax. This Pasternack SMA male to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to male SMA cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W00120 SMA male to SMA male cable assembly is constructed with RG402 Tinned coax.

PE3C10012

Pasternack Enterprises

PE3W02000-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male Right Angle to SMA Male Right Angle Cable 12 Inch Length Using RG316 Coax., Radio frequency assembly SMA male right angle to SMA male right angle cable 12 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to SMA male right angle cable 12 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and right angle SMA cable connection on the other. Our right angle SMA to right angle SMA cable assembly has male gender on end 1 and male on end 2. PE3W02000-12 can also be known as a right angle SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMA plug to SMA plug cable assembly PE3W02000-12 is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3W02000-12 RF cable are available on our downloadable PDF datasheet. SMA right angle plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements.

1 : $141.99
25 : $134.89
50 : $127.79
100 : $122.11

PE3W05500-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: SHV, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SHV Plug to BNC Male Cable 12 Inch Length Using RG223 Coax., Radio frequency assembly SHV plug to BNC male cable 12 inch length using RG223 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SHV plug to BNC male cable 12 inch length using RG223 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SHV to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SHV cable connection on one end and BNC cable connection on the other. Our SHV to BNC cable assembly has plug gender on end 1 and male on end 2. PE3W05500-12 can also be known as a SHV male to BNC plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.000 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SHV male to BNC plug cable assembly PE3W05500-12 is built with RG223 which is a flexible coax type. The Pasternack flexible SHV cable assembly is manufactured with SHV to BNC cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3W05500-12 RF cable are available on our downloadable PDF datasheet.PE3W05500-12 can also be used in the other direction and will be BNC male to SHV plug cable assembly if the opposite connectivity is required. SHV male to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SHV to BNC cable assembly for quick shipment worldwide. Variations of SHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SHV RF cable assembly as per your requirements.

1 : $94.19
25 : $89.48
50 : $84.77
100 : $81.0

PE3C5000-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Female Bulkhead to SMP Female Right Angle Cable 12 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly SMA female bulkhead to SMP female right angle cable 12 inch length using PE-SR405FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female bulkhead to SMP female right angle cable 12 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA bulkhead cable connection on one end and a right angle SMP cable connection on the other. Our SMA to right angle SMP cable assembly has a female gender on end 1 and a female on end 2. PE3C5000-12 can also be known as a SMA jack to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C5000-12 RF cable has a FEP jacket of 0.105-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 100 dB. Our bulkhead SMA female to right angle SMP female cable has a maximum VSWR of 1.4:1. SMA jack to SMP jack cable assembly PE3C5000-12 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to right angle SMP cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C5000-12 can also be used in the other direction and will be a right angle SMP female to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMP RF cable assembly as per your requirements.

1 : $113.99
25 : $108.29
50 : $102.59
100 : $98.03

PE3C8300-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 4.3-10 Male to 7/16 DIN Female 4 Hole Flange Low PIM Cable 12 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male to 7/16 DIN female 4 hole flange low PIM cable 12 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male to 7/16 DIN female 4 hole flange low PIM cable 12 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 7/16 DIN cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a 7/16 DIN 4 hole flange cable connection on the other. Our low PIM 4.3-10 to 7/16 DIN cable assembly has a male gender on end 1 and a female on end 2. PE3C8300-12 can also be known as a low PIM 4.3-10 plug to 7/16 DIN jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.26-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8300-12 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our 4.3-10 male to 4 hole flange 7/16 DIN female cable has a maximum VSWR of 1.4:1. 4.3-10 plug to 7/16 DIN jack cable assembly PE3C8300-12 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 7/16 DIN cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8300-12 can also be used in the other direction and will be a 7/16 DIN female 4 hole flange to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to 7/16 DIN jack 4 hole flange cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 and 7/16 DIN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 7/16 DIN low PIM RF cable assembly as per your requirements.

1 : $89.89
25 : $85.4
50 : $80.9
100 : $77.31

PE3C10100-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 2.92mm Male to TNC Female Bulkhead Cable 12 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 2.92mm male to TNC female bulkhead cable 12 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to TNC female bulkhead cable 12 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and a TNC bulkhead cable connection on the other. Our a 2.92mm to a TNC cable assembly has male gender on end 1 and female on end 2. PE3C10100-12 can also be known as a 2.92mm plug to TNC jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 2.92mm plug to TNC jack cable assembly PE3C10100-12 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 2.92mm cable assembly is manufactured with 2.92mm to TNC cable connectors and has a 50 Ohm impedance. One connector features the solder attachment method and a stainless steel body with gold over nickel plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10100-12 can also be used in the other direction and will be TNC female bulkhead to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to TNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to TNC cable assembly for quick shipment worldwide. Variations of 2.92mm and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to TNC RF cable assembly as per your requirements.

1 : $134.99
25 : $128.24
50 : $121.49
100 : $116.09

PE3M0012-60

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/60-RG142-27478, RF Cable Type: M17/60-RG142, RF Cable Impedance: 50 Ohm, Length: 60 inches. MIL-DTL-17 N Female to N Female Bulkhead Cable 60 Inch Length Using M17/60-RG142 Coax., Radio frequency assembly MIL-DTL-17 N female to N female bulkhead cable 60 inch length using M17/60-RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 N female to N female bulkhead cable 60 inch length using M17/60-RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/02-0503 type N to M39012/03-0503 type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/02-0503 N type cable connection on one end and M39012/03-0503 N type bulkhead cable connection on the other. Our M39012/02-0503 type N to M39012/03-0503 type N cable assemblies have a female gender on end 1 and female on end 2. This M39012/02-0503 type N to M39012/03-0503 type N cable is a female to female coax assembly, PE3M0012-60, can also be known as a MIL-DTL-17/MIL-C-17 M39012/02-0503 N type jack to M39012/03-0503 type N jack cable assembly and will be shipped same-day as it is purchased. M39012/02-0503 N type jack to M39012/03-0503 type N jack cable assembly PE3M0012-60 is built with M17/60-RG142 which is a flexible coax type. The Pasternack flexible M39012/02-0503 N cable assembly is manufactured with M39012/02-0503 type N to M39012/03-0503 type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MIL-C-17 11 GHz maximum frequency M39012/02-0503 N type female to M39012/03-0503 N type female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0012-60 can also be used in the other direction and will be M39012/03-0503 type N female bulkhead to M39012/02-0503 type N female cable assembly if the opposite connectivity is required. M39012/02-0503 N type jack to M39012/03-0503 type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/02-0503 type N to M39012/03-0503 N type cable assembly for quick shipment worldwide. Variations of M39012/02-0503 type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 N female to N female bulkhead cable 60 inch length using M17/60-RG142 coax.

1 : $318.99
25 : $303.04
50 : $287.09

PE3C8001-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Male to N Female Low PIM Cable 24 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly N male to N female low PIM cable 24 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male to N female low PIM cable 24 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low PIM type N to type N cable assembly has a male gender on end 1 and a female on end 2. PE3C8001-24 can also be known as a low PIM type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.808-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. type N low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8001-24 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our type N male to type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3C8001-24 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8001-24 can also be used in the other direction and will be a type N female to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low PIM RF cable assembly as per your requirements.

1 : $80.29
25 : $76.28
50 : $72.26
100 : $69.05

PE3C0012

Pasternack Enterprises

Teledyne HiRel

5962-87760012A

Teledyne HiRel

BUFFER/DRIVER, OCTAL, NONINVERTING, W/3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-89550012A

Teledyne HiRel

EXCLUSIVE-OR GATE, QUAD 2-INPUT
RoHS : Not Compliant

5962-87610012A

Teledyne HiRel

NAND GATE, TRIPLE 3-INPUT
RoHS : Not Compliant

5962-87630012A

Teledyne HiRel

BUFFER/DRIVER, OCTAL, NONINVERTING, W/3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-88520012A

Teledyne HiRel

FLIP-FLOP, D-TYPE, DUAL, POSITIVE EDGE-TRIGGERED, WITH CLEAR AND SET
RoHS : Not Compliant

5962-87550012A

Teledyne HiRel

BUFFER/DRIVER, OCTAL, INVERTING, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

CY37064P100-125AXC

Teledyne HiRel

PLD, 64 MACROCELL, ELECTRICALLY ALTERABLE, 150 MHZ TOGGLE SPEED

Venkel Ltd.

C0805C0G500-122JNE

VENKEL LTD

Chip Capacitor;0805;C0G;50V;1200pF;�5%
RoHS : Compliant

150,000

C0402X7R500-122JNE

VENKEL LTD

Chip Capacitor;0402;X7R;50V;1200pF;�5%
RoHS : Compliant

C0805HQN500-120JNP

VENKEL LTD

High-Q NP0 Capacitor;0805;HQN;50V;12pF;�5%
RoHS : Compliant

C0805X7R500-123MNP

VENKEL LTD

Chip Capacitor;0805;X7R;50V;0.012uF;�20%
RoHS : Compliant

C1111HQN500-121GNE

VENKEL LTD

High-Q NP0 Capacitor;1111;HQN;50V;120pF;�2%
RoHS : Compliant

C0402C0G500-121JNE

VENKEL LTD

Chip Capacitor;0402;C0G;50V;120pF;�5%
RoHS : Compliant

C0603C0G500-120JPBE

VENKEL LTD

Chip Capacitor;0603;C0G;50V;12pF;�5%;Pb
RoHS : Compliant

C0603C0G500-120KNP

VENKEL LTD

Chip Capacitor;0603;C0G;50V;12pF;�10%
RoHS : Compliant

C1812C0G500-122KNE

VENKEL LTD

Chip Capacitor;1812;C0G;50V;1200pF;�10%
RoHS : Compliant

C0805C0G500-120GNP

VENKEL LTD

Chip Capacitor;0805;C0G;50V;12pF;�2%
RoHS : Compliant

C0805X7R500-121KNP

VENKEL LTD

Chip Capacitor;0805;X7R;50V;120pF;�10%
RoHS : Compliant

C1206C0G500-123GNE

VENKEL LTD

Chip Capacitor;1206;C0G;50V;0.012uF;�2%
RoHS : Compliant

C1206X7R500-124JNP

VENKEL LTD

Chip Capacitor;1206;X7R;50V;0.12uF;�5%
RoHS : Compliant

C1206X7R500-124KNE

VENKEL LTD

Chip Capacitor;1206;X7R;50V;0.12uF;�10%
RoHS : Compliant

C0805C0G500-120KNP

VENKEL LTD

Chip Capacitor;0805;C0G;50V;12pF;�10%
RoHS : Compliant

Waytek, Inc.

19205-0012

Molex

3/0 GA Butt Connector Non-Insulated Seamless

1 : $4.2597
10 : $3.8642
50 : $3.5568
100 : $3.1178
200 : $2.8981
500 : $2.7957

4,414

160-012

AFC Cable Systems Inc

Non-Metallic Electrical Tubing Black 3/8" 100 FT UL LIQUID TIGHT

100 : $0.9533
500 : $0.9005

3,000

22AWC00125

Essentra Components

1/8" Adhesive Backed Clamp Natural, Bundle Diameter UL APPROVED NYLON 94V-2

100 : $0.375
200 : $0.3281
500 : $0.3011
1,000 : $0.2741
5,000 : $0.2524

1,118

7000129482

3" Round Red Reflector 3M 989 DIAMOND GRADE TAPE EXCEEDS DOT SAE A REQUIRMENTS

10 : $1.585
50 : $1.4142
100 : $1.2843
200 : $1.2366
500 : $1.1956
1,000 : $1.1546

1,080

7000129481

3" Round Amber Reflector 3M 989 DIAMOND GRADE TAPE EXCEEDS DOT SAE A REQUIRMENTS

10 : $1.5542
50 : $1.3867
100 : $1.2594
200 : $1.2126
500 : $1.1724
1,000 : $1.1322

857

LT-1511-110-012

Carling Technologies

Carling Technologies LT-1511-110-012 clear nylon paddle toggle switch is an illuminated SPST On-Off switch rated 10A/15A/15A at 250VAC, 125VAC, and 12-28VDC. It features .250 tab quick-connect terminals, bushing mount, and clear paddle actuator.
RoHS : Unknown

1 : $15.59
10 : $13.31
50 : $12.14
100 : $11.72
200 : $11.39
500 : $11.03

735

19164-0012

Molex

22-18 Ga Red Perma-Seal Female Quick Disconnect 30982
RoHS : Compliant

20 : $0.5847
50 : $0.5219
100 : $0.4728
200 : $0.4571
500 : $0.4415
1,000 : $0.4238

653

C01600V00000012

Amphenol Sine Systems

Amphenol Sine Systems C01600V00000012 protective cap is a plastic cover for ecomate female cable connectors. This accessory protects unmated connector faces from dust and handling damage and is built for compatible ecomate circular connector assemblies.

1 : $10.53
5 : $9.81
10 : $8.83
50 : $8.32
100 : $7.6
200 : $7.14

386

C01620G00310012

Amphenol Sine Systems

Amphenol Sine Systems C01620G00310012 ecomate plastic female receptacle has 3+PE contacts, screw termination, and silver-plated contacts. Rated 16A at 400V with IP65/IP67 sealing, it provides a panel-mount mating interface for ecomate male cable connectors.

1 : $9.82
5 : $9.17
10 : $8.23
50 : $7.94
100 : $7.52
200 : $7.41

277

C01620H00310012

Amphenol Sine Systems

Amphenol Sine Systems C01620H00310012 ecomate plastic male straight cable connector has 3+PE contacts, screw termination, and a black backshell. It is rated 16A at 400V, sealed to IP65/IP67, and accepts 0.75-2.5 mm wire with 6-12.5 mm cable.

1 : $12.5726
5 : $11.7304
10 : $10.5273
50 : $9.9257
100 : $9.0836
200 : $8.5422

263

C01620K00310012

Amphenol Sine Systems

Amphenol Sine Systems C01620K00310012 ecomate plastic male right-angle cable connector has 3+PE contacts, screw termination, and a black backshell. Rated 16A at 400V with IP65/IP67 sealing, it accepts 0.75-2.5 mm wire and 6-12.5 mm cable.

1 : $25.2825
5 : $23.5562
10 : $21.213
50 : $19.9792
100 : $18.253
200 : $17.1425

220

AT62-20-0122

Amphenol Sine Systems

ATM Female Reel Socket Contact 22-16GA Size 20 S&F 4000/Reel 1062-20-0122

4,000 : $0.2162
20,000 : $0.1938

5700125BK00R5

ShawCor Ltd

DSG-Canusa CPA-100 dual-wall heat shrink tubing is black adhesive-lined polyolefin tubing with a 1/8" size for sealing and protecting wires, splices, and terminals. Its dual-wall construction supports moisture resistance, abrasion protection, and durable environmental sealing in spool applications.

1,000 : $0.5977
5,000 : $0.5627

TB200-12

Eaton Electronics

Double Row 12 Position 3 Holes Terminal Block 30A 300V Max #6-32 SCREWS

1 : $17.95
10 : $16.16
50 : $14.83
100 : $13.45
200 : $12.47
500 : $11.57

4200125BK00R5

ShawCor Ltd

DSG-Canusa CPX-100 polyolefin heat shrink tubing is black tubing with a .125" size for insulating and protecting wires, terminals, and splices. Its flexible polyolefin construction supports clean shrink coverage, abrasion protection, and dependable electrical insulation in harness applications.

1,000 : $0.2203
5,000 : $0.212

0012GVCK-R Distributor

Link URL