| Electronic Components Datasheet Search |
|
01212SF-R18 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Ameya Holding Limited | PMBT4401,215![]() | Nexperia | RoHS : Compliant | 720,000 | ||
BSH201,215![]() | Nexperia | BSH201 Series 60 V 4.25 Ohm 3 nC 0.417 W P-Channel Silicon SMT MOSFET - SOT-23 RoHS : Compliant | 48,000 | |||
| MPH201210H2R2MT | Sunlord | MPH201210H2R2MT | 3,000 | |||
![]() ComSIT USA | 5450121010 | Sumida Corporation | AVAILABLE EU | 5,413 | ||
| SRN20121R5M | Bourns Inc | AVAILABLE EU | 16,752 | |||
| HF3FF0121ZST257 | AVAILABLE EU | 8,695 | ||||
![]() NexGen Digital | C0402C0G500-121JNE![]() | VENKEL LTD | RoHS : Compliant | 14,292 | ||
| CCF-50-1211F | Vishay Huntington | 3,490 | ||||
BAW101,215![]() | Nexperia | RoHS : Compliant | 3,001 | |||
| 35F0121-0SR-10 | Qnity Laird | RoHS : Compliant | 800 | |||
| 39-01-2101 | Molex | RoHS : Compliant | 82 | |||
| 2201-2127 | Molex | 50 | ||||
| 2201-2107 | Molex | 50 | ||||
| 39-01-2100 | Molex | RoHS : Compliant | 42 | |||
| LGT0410-121K-CB | MMAG | 20 | ||||
| 69000121 | 12 | |||||
![]() PEI Genesis | EN2997SE01212FN | SOURIAU-SUNBANK | RoHS : Compliant |
| 0 | |
| 36F5001-21N4N | SOURIAU-SUNBANK |
| 0 | |||
| RT0W01210PNH03 | Amphenol Sine Systems |
| 0 | |||
| S3843-2012-12G | SOURIAU-SUNBANK |
| 0 | |||
| 7012-1296 | Amphenol SV Microwave | RoHS : Compliant |
| 0 | ||
| 71-570121-03P | Amphenol Corporation |
| 0 | |||
| UT0W01210SZH | SOURIAU-SUNBANK |
| 0 | |||
| UTGX01210SZ | SOURIAU-SUNBANK |
| 0 | |||
| 93-570121-04P | Amphenol Corporation |
| 0 | |||
| S3370AB09100121 | SOURIAU-SUNBANK |
| 0 | |||
| S3451C-10040121-029 | SOURIAU-SUNBANK |
| 0 | |||
| S4108F0905S2.0-12-1 | SOURIAU-SUNBANK |
| 0 | |||
| EN2997SE01212MN | SOURIAU-SUNBANK | RoHS : Compliant |
| 0 | ||
| C10-639140-121 | Amphenol Corporation |
| 0 | |||
| EXM-A01-21-11SA1 | Amphenol Corporation |
| 0 | |||
![]() Powell Electronics | 5-1904012-1 | TE Connectivity | TE COMPONENT (REF 5-1904012-1) RoHS : Compliant |
| 15,164 | |
| 100G0121-0.50-0/9CK0042 | TE Connectivity | SPEC WIRE 100G0121-0.50-0/9CK0042 RoHS : Compliant |
| 3,960 | ||
| MTSW-101-21-G-S-055 | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 2,348 | ||
| MTSW-101-21-T-S-1251 | Samtec Inc | PCB Header, 2.54mm Pitch, SMT, Male, Wid RoHS : Compliant |
| 2,024 | ||
| TSW-101-21-S-S | Samtec Inc | Classic PCB Header Strips, 0.100" pitch RoHS : Compliant |
| 497 | ||
| 68001-214HLF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 330 | ||
| 6126-201-2158 | TE Connectivity | DEUTSCH CONNECTOR 6126-201-2158 |
| 193 | ||
| 91-570121-4P | Amphenol Corporation | CONNECTOR |
| 40 | ||
| R30-6201214 | Harwin | Hardware |
| 30 | ||
| 71-310012-10P | Amphenol Corporation | MIL-C 26482 SERIES RECEPT CONNECTOR |
| 9 | ||
| 910-70-12-10PW01L | TE Connectivity | DEUTSCH CONNECTOR 910-70-12-10PW01L |
| 6 | ||
| RM312-080-121-2900 | AirBorn a molex company | PCB Connector RoHS : Compliant |
| 5 | ||
| BNX40AC00-1210AX | TE Connectivity | Connectors |
| 3 | ||
| 72-173012-10P | Amphenol Corporation | MIL-C 26482 SERIES CONNECTOR |
| 3 | ||
| 901-21R61-5PN-T2 | TE Connectivity | DEUTSCH CONNECTOR 901-21R61-5PN-T2 RoHS : Compliant |
| 1 | ||
![]() PUI | 2012-1X03G00S/2.8/3.4/J | 14,171 | ||||
| 2012-1X07G00S/028/031/D | 7,015 | |||||
| 2012-1X04G00S-3-3-10B-H1. | 3,000 | |||||
| 2012-1X12G00S/028/053/K | 1,396 | |||||
| 2012-1X40G00S/023/023/Q | 612 | |||||
| 2012-1X16G00S/033/033/G | 600 | |||||
| 2012-1X17G00S/8.38/5.08/Q | 400 | |||||
| 700-12189 | All Axis Machining | RoHS : Compliant | 298 | |||
| 2012-1X40G01S/040/090/N | 250 | |||||
| 2012-1X02G01S/040/090/N | 102 | |||||
| 2012-1X12G00S/028/054/H | 100 | |||||
| 2012-1X10G00S/023/070/J | 55 | |||||
| 9001-21321C00A | 26 | |||||
| 2012-1X40G00S/030/060/T | 9 | |||||
| 2012-1X03G00S028/068/M | 7 | |||||
![]() Rutronik | CR10-1212-FN | ASJ Holdings Limited | RC0402 12,1K 1% 0,063W TK100 RoHS : Compliant |
| 500,000 | |
| CR10-1212-FK | ASJ Holdings Limited | RC0402 12,1K 1% 0,063W TK100 RoHS : Compliant |
| 410,000 | ||
| CR10-1213-FK | ASJ Holdings Limited | RC0402 121K 1% 0,063W TK100 RoHS : Compliant |
| 30,000 | ||
| 3412.0121.24 | Schurter Electronic Components | USF 3A very fast 32V SMD 0603 RoHS : Compliant |
| 15,000 | ||
| 39012100 | Molex | 10P RECEP 2R FOR STR USE W LOCK RoHS : Compliant |
| 12,500 | ||
| CIGB201210AG1R0MPE | Samsung Electro-Mechanics | CIGB201210 1,0uH 2,4A 20% RoHS : Compliant |
| 12,000 | ||
| CIGB201210AG1R5MPE | Samsung Electro-Mechanics | CIGB201210 1,5uH 2,0A 20% RoHS : Compliant |
| 12,000 | ||
| CIGB201210AGR24MPE | Samsung Electro-Mechanics | CIGB201210 0,24uH 5,0A 20% RoHS : Compliant |
| 12,000 | ||
| CR10-121-JK | ASJ Holdings Limited | RC0402 120R 5% 0,063W TK100 RoHS : Compliant |
| 10,000 | ||
| HF118F/012-1Z1T(136) | Xiamen Hongfa Electroacoustic Co.,Ltd. | Power Relay THT 1CO 8A 12DC RoHS : Compliant |
| 6,000 | ||
| VN30.12/10513 | Marschner | EI30/12,5/2ST 230V/12V-1,5VA RoHS : Compliant |
| 2,500 | ||
| VN30.12/10512 | Marschner | EI30/12,5/2ST 230V/9V-1,5VA RoHS : Compliant |
| 1,398 | ||
| HF115F/012-1Z3BF(610) | Xiamen Hongfa Electroacoustic Co.,Ltd. | Power Relay THT 1CO 16A 12V RoHS : Compliant |
| 1,000 | ||
| HF118F/012-1ZS1T(136) | Xiamen Hongfa Electroacoustic Co.,Ltd. | Power Relay THT 10A 12DC 1CO RoHS : Compliant |
| 25 | ||
| 3570-1210-121 | Comus International | REED RELAY THT 12V 1A RoHS : Not Compliant |
| 5 | ||
![]() Chip 1 Exchange | FI-B2012-182JJT | INSTOCK | 16,175 | |||
| 35F0121-0SR-10 | SMD | INSTOCK | 14,298 | |||
| CRCW0201210RFNED | INSTOCK | 11,087 | ||||
| ML400M220121P50008 | INSTOCK | 8,300 | ||||
| CRCW1218100121%R02 | INSTOCK | 3,960 | ||||
| C1608NP0121JGT | INSTOCK | 1,820 | ||||
| UPB201212T-800Y-N | INSTOCK | 1,701 | ||||
| DT1012101 | Fox Electronics | INSTOCK | 866 | |||
| 801-83-012-10-012101 | INSTOCK | 555 | ||||
| 39012105- | Molex | INSTOCK | 332 | |||
| 68101217 | SUMITOMO ELECTRIC Interconnect Products | INSTOCK | 235 | |||
| 39012140- | Molex | INSTOCK | 188 | |||
| BXS012/1 | Bulgin | INSTOCK | 30 | |||
| 629104190121- | Wurth Elektronik | INSTOCK | 29 | |||
| BXS012/1 | INSTOCK | 5 | ||||
![]() Avnet Silica | BAS101,215![]() | Nexperia | (Alt: BAS101,215) RoHS : Compliant | 405,000 | ||
PSMN012-100YLX![]() | Nexperia | (Alt: PSMN012-100YLX) RoHS : Compliant | 1,500 | |||
| L2C5-MM001211E1900 | Lumileds | (Alt: L2C5-MM001211E1900) RoHS : Compliant | 400 | |||
| L2C5-FS001211E1900 | Lumileds | (Alt: L2C5-FS001211E1900) RoHS : Compliant | 350 | |||
| FL2500121 | Diodes Incorporated | Crystal Quartz 25 MHz SMD 32mm x 25mm x 068mm FL (Alt: FL2500121) RoHS : Compliant | 0 | |||
BSH201,215![]() | Nexperia | (Alt: BSH201,215) RoHS : Compliant | 0 | |||
| SRF2W012-150 | Antenova M2M | (Alt: SRF2W012-150) RoHS : Compliant | 0 | |||
| L2C5-50701211E1900 | Lumileds | (Alt: L2C5-50701211E1900) RoHS : Compliant | 0 | |||
| L2C5-27901216E2300 | Lumileds | (Alt: L2C5-27901216E2300) RoHS : Compliant | 0 | |||
| L2C2-30801211E1900 | Lumileds | LED UniColor White 5400lm 3000K Chip LED 2Pin SMD Tube (Alt: L2C2-30801211E1900) RoHS : Compliant | 0 | |||
| L2C5-30901216E2300 | Lumileds | (Alt: L2C5-30901216E2300) RoHS : Compliant | 0 | |||
| L2C5-40801210F1500 | Lumileds | (Alt: L2C5-40801210F1500) RoHS : Compliant | 0 | |||
| L2C5-57801211E1900 | Lumileds | (Alt: L2C5-57801211E1900) RoHS : Compliant | 0 | |||
| L2C2-40801211E1900 | Lumileds | LED UniColor White 5805lm 4000K Chip LED 2Pin SMD Tube (Alt: L2C2-40801211E1900) RoHS : Compliant | 0 | |||
| L2C5-40901216E2300 | Lumileds | (Alt: L2C5-40901216E2300) RoHS : Compliant | 0 | |||
![]() Chip-Germany GmbH | HRF-1012-100-50-MAPS | Richey Capacitor | 4,163 | |||
| PHTF250-121RI | API Delevan | 24 | ||||
| X22-24.000-12-10|30X | Euroquartz Ltd | 10 | ||||
![]() Component Electronics, Inc | 2320-2-01-21-00-00-07-0 | Mill-Max Mfg Corp | IN STOCK SHIP TODAY | 4,000 | ||
1206J2500121KXT![]() | Syfer Technology | IN STOCK SHIP TODAY RoHS : Compliant |
| 2,260 | ||
| 133-3701-216 | Johnson Components | IN STOCK SHIP TODAY RoHS : Compliant |
| 860 | ||
| 60.7012-10021 | Stäubli Electrical Connectors | IN STOCK SHIP TODAY | 355 | |||
| 0022012137 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 236 | ||
| 68201-211 | TE Connectivity | IN STOCK SHIP TODAY | 40 | |||
| 0022012127 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 32 | ||
| M39012/16-0017 | Kings Electronics | IN STOCK SHIP TODAY |
| 11 | ||
| PBR51012/1 | Ericsson | IN STOCK SHIP TODAY | 8 | |||
| CW201212-LAB1 | Bourns Inc | IN STOCK SHIP TODAY |
| 7 | ||
| 39-01-2165 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 7 | ||
| PSMN012-100YS-115 | NXP Semiconductors | IN STOCK SHIP TODAY |
| 6 | ||
| M39012/19-0102 | Kings Electronics | IN STOCK SHIP TODAY |
| 4 | ||
| 970-009-030-121 | NorComp | IN STOCK SHIP TODAY |
| 3 | ||
| 1642.0121 | Marquardt Switches Inc | IN STOCK SHIP TODAY |
| 1 | ||
![]() DB Roberts | D8-339-300-121 | Southco |
| 1,814 | ||
| R4-90-121-10 | Southco | These robust latching solutions for doors and panels of heavy-duty equipment and vehicles combine rotary-action security with push-to-close convenience. Their compact design provides concealed operation while tolerating misalignment on closing engaging RoHS : Compliant |
| 631 | ||
| 97-50-121-12 | Southco | Lever-actuated operation creates over-center action and the simple attractive design of this latch incorporates natural tension right into the curved latch-spring mechanism to prevent accidental opening. |
| 6 | ||
| AC-10-121-11 | Southco | 0 | ||||
| 0121800001E | Essentra Components | 0 | ||||
| H3-60-121-144 | Southco | The swinghandle nests into the housing for minimal protrusion and pops up to swing smoothly for easy latch actuation. Robust die-cast zinc construction provides durable corrosion-resistant performance with optional gasketing for indoor or outdoor use. | 0 | |||
| 1440121 | Essentra Components | 0 | ||||
| 100121 | Pop Rivets | TASD48BS 001 B10K | 0 | |||
| PRT5201-21 | Pop Rivets | 0 | ||||
| 47-90-121-60 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 0121850000VR | Essentra Components | 0 | ||||
| E5-6-012-131 | Southco | 0 | ||||
| D8-339-500-121 | Southco | D8-339-500-121 | 0 | |||
| 21001-01210 | Avdel | AVBOLT STR 38 FL ST 3PC | 0 | |||
| ME-01-213-50 | Southco | Simple styling and numerous installation options make these latches extremely practical for a wide variety of entry-door applications. A series of attractive design and finish options provide appropriate accents. | 0 | |||
![]() EBV Elektronik | NX30P0121UKZ | NXP Semiconductors | Power Switch 3A 12Pin WLCSP TR (Alt: NX30P0121UKZ) RoHS : Compliant | 0 | ||
| GC15012-150D | Microchip Technology Inc | Si TVAR Non Hermetic EPSM SMT (Alt: GC15012-150D) RoHS : Not Compliant | 0 | |||
| MIC2012-1PZQS | Microchip Technology Inc | (Alt: MIC2012-1PZQS) RoHS : Compliant | 0 | |||
| BTS50121EKAXUMA1 | Infineon Technologies AG | BUFFERINVERTER BASED PERIPHERAL DRIVER 10A PDSO14 (Alt: SP000768294) RoHS : Compliant | 0 | |||
BTS50121EKBXUMA1![]() | Infineon Technologies AG | Power Load Switch AECQ100 High Side 1 Output 135 V 50 A0012 ohm out SOIC14 (Alt: SP000865468) RoHS : Compliant | 0 | |||
| BTS70121EPAXUMA1 | Infineon Technologies AG | Power Switch High Side 85A 14Pin TSDSO TR (Alt: SP001225122) RoHS : Compliant | 0 | |||
| TMJUTHW0121102420 | Taoglas Antenna Solutions | CONN JACK 1PORT 100 BASET (Alt: TMJUTHW0121102420) RoHS : Compliant | 0 | |||
| BTS700121ESPXUMA2 | Infineon Technologies AG | (Alt: SP005882373) RoHS : Compliant | 0 | |||
| LTNPTVA120121ME3TOBO1 | Infineon Technologies AG | (Alt: SP001366332) RoHS : Not Compliant | 0 | |||
| DF8064101213700S R0W4 | Intel Corporation | (Alt: 922916) RoHS : Compliant | 0 | |||
| BTS700121ESPDAUGHBDTOBO1 | Infineon Technologies AG | BTS700121ESP DAUGHBD (Alt: SP005560795) RoHS : Compliant | 0 | |||
![]() ECCO | 100-0121-000 | ITT Interconnect Solutions |
| 2,629 | ||
| 97-3057-1012-1(676) | Amphenol Industrial Operations |
| 484 | |||
| 031-0560-121 | ITT Interconnect Solutions |
| 197 | |||
| 19070-0121 | Molex | RoHS : Compliant |
| 25 | ||
| 0190700121 | Molex | RoHS : Compliant |
| 25 | ||
![]() FDH Electronics | 6126-201-2158 | TE Connectivity | Circular Conn |
| 973 | |
| M1100-121-0410 | Amphenol Aerospace | Circular Conn |
| 744 | ||
| M39012/17-0103 | Delta Electronics Manufacturing Corp | Connector MIL M | 479 | |||
| M39012/19-0101 | Delta Electronics Manufacturing Corp | RF / Coaxial | 171 | |||
| S3843-2012-12G | SOURIAU-SUNBANK | Backshells & Ac | 8 | |||
| M1100-121-0216 | Amphenol Aerospace | Connector 83723 |
| 2 | ||
| BC50-12-10P-20-1H | BTC-Customer Drawing "DWG" | Connector Misc | 1 | |||
| EN2997SE01212FN | SOURIAU-SUNBANK | Connector 83723 RoHS : Compliant | 0 | |||
| 7012-1296 | Amphenol SV Microwave | Cable Assembly RoHS : Compliant |
| 0 | ||
| STXR40AB00-1210AI | TE Connectivity | Harness Mgmt RoHS : Not Compliant |
| 0 | ||
| 55PC0121-16-6/9 | TE Connectivity | Wire and Cable RoHS : Compliant | 0 | |||
| EN2997SE01212MN | SOURIAU-SUNBANK | Connector 83723 RoHS : Compliant |
| 0 | ||
| M39012/18-0103 | Delta Electronics Manufacturing Corp | Connector MIL M | 0 | |||
| 7012-1283 | Amphenol SV Microwave | Cable Assembly RoHS : Compliant |
| 0 | ||
| M39012/17-0111 | Delta Electronics Manufacturing Corp | Connector MIL M | 0 | |||
![]() Flip Electronics | CY8C20121-SX1IT | Infineon Technologies AG | Stock, Ship Today |
| 2,500 | |
| CY8C20121-SX1I | Infineon Technologies AG | Stock, Ship Today |
| 1,450 | ||
![]() Maritex | PMBT4401,215![]() | Nexperia | Bipolar Transistors (BJT); PMBT4401,215; NEXPERIA; NPN; 3 RoHS : Compliant |
| 30,000 | |
| LSQBA201212T100M | TAIYO YUDEN | SMD Inductors; LSQBA201212T100M; TAIYO YUDEN; 10 �H; 2.52 MHz; 500 m?; 1.25 mm RoHS : Compliant |
| 9,000 | ||
| CFR0S4J0121A50 | Royal Electronic Factory (Thailand) Co Ltd | Miniature resistor RM; 120 Ohm; 5%; 1/4W; 1.85x3.5mm RoHS : Compliant |
| 8,998 | ||
| CFR0S2J0121A10 | Royal Electronic Factory (Thailand) Co Ltd | Carbon resistor; 120 Ohm; 0.5W; 3x9mm |
| 4,170 | ||
| CP01210000 | Cvilux Corporation | Crimp terminal housing; pitch 4.20mm; 10-contacts [2x5]; male; 2 rows; applicable wire AWG#16-26; 300V/9A |
| 3,502 | ||
| CP01212000 | Cvilux Corporation | Crimp terminal housing; pitch 4.20mm; 12-contacts [2x6]; male; 2 rows; applicable wire AWG#16-26; 300V/9A |
| 2,750 | ||
| CP-01214000 | Cvilux Corporation | Crimp terminal housing; pitch 4.20mm; 14-contacts [2x7]; male; 2 rows; applicable wire AWG#16-26; 300V/9A RoHS : Compliant |
| 2,220 | ||
| CP01218000 | Cvilux Corporation | Crimp terminal housing; pitch 4.20mm; 18-contacts [2x9]; male; 2 rows; applicable wire AWG#16-26; 300V/9A |
| 1,523 | ||
| CF20121U0R0-NH | Cvilux Corporation | ZIF connector for FFC/FPC; pitch 0.50mm; 12-contacts; SMD; side entry; upper contacts RoHS : Compliant |
| 1,265 | ||
| RNP18-PK0810-121K | RDA Microelectronics | Inductor: wire; THT; 120uH; 2A; 0.25R; 9.5x13.5mm; 10% |
| 1,000 | ||
| CP01216000 | Cvilux Corporation | Crimp terminal housing; pitch 4.20mm; 16-contacts [2x8]; male; 2 rows; applicable wire AWG#16-26; 300V/9A |
| 869 | ||
| HF115F/012-1HS3A | Xiamen Hongfa Electroacoustic Co.,Ltd. | Electromagnetic relay; contact rating current 16A; coil voltage 12VDC; make contact (1A); 16A/24VDC; 16A/250VAC RoHS : Compliant |
| 393 | ||
| CF10121V0T0 | Cvilux Corporation | ZIF connector for FFC/FPC; pitch 1.00mm; 12-contacts; SMD; top entry RoHS : Compliant |
| 323 | ||
| DD11.0121.1111 | Schurter Electronic Components | IEC C14 power entry module; with 2-pole switch; 2-pole fuseholder; non-illuminated; cover; V-Lock; screw mounting; version A; 10A/250VAC. RoHS : Compliant |
| 98 | ||
| HF118F/012-1ZS1T-136 | Xiamen Hongfa Electroacoustic Co.,Ltd. | Relay HF118F/012-1ZS1T(136), 10A, coil voltage 12VDC, changeover contact (1C), 8A/30VDC, 8A/250VAC |
| 1 | ||
![]() Pasternack Enterprises US | PE3C0121/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male to N Male Low Loss Cable 48 Inch Length Using LMR-195 Coax with Times Microwave Components with HeatShrink., Radio frequency assembly SMA male to N male low loss cable 48 inch length using LMR-195 coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to N male low loss cable 48 inch length using LMR-195 coax with Times Microwave components with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and type N cable connection on the other. Our low loss SMA to N type cable assemblies have a male gender on end 1 and male on end 2. PE3C0121/HS-48 can also be known as a low loss SMA plug to N type plug cable assembly and will be shipped same-day as it is purchased. SMA plug to type N plug cable assembly PE3C0121/HS-48 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0121/HS-48 can also be used in the other direction and will be type N male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male low loss cable 48 inch length using LMR-195 coax with Times Microwave components with heatshrink. |
| 2,336 | |
| PE3C0121LF-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male to N Male Low Loss Cable 48 Inch Length Using LMR-195 Coax with Times Microwave Components, LF Solder., Radio frequency assembly SMA male to N male low loss cable 48 inch length using LMR-195 coax with Times Microwave components, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to N male low loss cable 48 inch length using LMR-195 coax with Times Microwave components, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and N type cable connection on the other. Our low loss SMA to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C0121LF-48 can also be known as a low loss SMA plug to type N plug cable assembly and will be shipped same-day as it is purchased. SMA plug to N type plug cable assembly PE3C0121LF-48 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency SMA male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0121LF-48 can also be used in the other direction and will be type N male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to N type cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male low loss cable 48 inch length using LMR-195 coax with Times Microwave components, LF solder. |
| 2,336 | ||
| PE3C0121/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to N Male Low Loss Cable 36 Inch Length Using LMR-195 Coax with Times Microwave Components with HeatShrink., Radio frequency assembly SMA male to N male low loss cable 36 inch length using LMR-195 coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to N male low loss cable 36 inch length using LMR-195 coax with Times Microwave components with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and N type cable connection on the other. Our low loss SMA to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C0121/HS-36 can also be known as a low loss SMA plug to type N plug cable assembly and will be shipped same-day as it is purchased. SMA plug to type N plug cable assembly PE3C0121/HS-36 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to N type cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0121/HS-36 can also be used in the other direction and will be type N male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male low loss cable 36 inch length using LMR-195 coax with Times Microwave components with heatshrink. |
| 2,336 | ||
| PE3C0121LF-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to N Male Low Loss Cable 36 Inch Length Using LMR-195 Coax with Times Microwave Components, LF Solder., Radio frequency assembly SMA male to N male low loss cable 36 inch length using LMR-195 coax with Times Microwave components, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to N male low loss cable 36 inch length using LMR-195 coax with Times Microwave components, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and type N cable connection on the other. Our low loss SMA to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C0121LF-36 can also be known as a low loss SMA plug to type N plug cable assembly and will be shipped same-day as it is purchased. SMA plug to type N plug cable assembly PE3C0121LF-36 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency SMA male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0121LF-36 can also be used in the other direction and will be type N male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male low loss cable 36 inch length using LMR-195 coax with Times Microwave components, LF solder. |
| 2,336 | ||
| PE3C0121-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 24 inches. SMA Male to N Male With Times Connectors Cable 24 Inch Length Using LMR-195 Coax., Radio frequency assembly SMA male to N male with times connectors cable 24 inch length using LMR-195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to N male with times connectors cable 24 inch length using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and N type cable connection on the other. Our low loss SMA to type N cable assemblies have a male gender on end 1 and male on end 2. This SMA to type N cable is a male to male coax assembly, PE3C0121-24, can also be known as a low loss SMA plug to type N plug cable assembly and will be shipped same-day as it is purchased. SMA plug to N type plug cable assembly PE3C0121-24 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0121-24 can also be used in the other direction and will be type N male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male with times connectors cable 24 inch length using LMR-195 coax. |
| 2,336 | ||
| PE3C0121/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to N Male Low Loss Cable 24 Inch Length Using LMR-195 Coax with Times Microwave Components with HeatShrink., Radio frequency assembly SMA male to N male low loss cable 24 inch length using LMR-195 coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to N male low loss cable 24 inch length using LMR-195 coax with Times Microwave components with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and N type cable connection on the other. Our low loss SMA to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C0121/HS-24 can also be known as a low loss SMA plug to type N plug cable assembly and will be shipped same-day as it is purchased. SMA plug to type N plug cable assembly PE3C0121/HS-24 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to N type cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0121/HS-24 can also be used in the other direction and will be type N male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to N type cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male low loss cable 24 inch length using LMR-195 coax with Times Microwave components with heatshrink. |
| 2,336 | ||
| PE3C0121LF-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to N Male Low Loss Cable 24 Inch Length Using LMR-195 Coax with Times Microwave Components, LF Solder., Radio frequency assembly SMA male to N male low loss cable 24 inch length using LMR-195 coax with Times Microwave components, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to N male low loss cable 24 inch length using LMR-195 coax with Times Microwave components, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and type N cable connection on the other. Our low loss SMA to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C0121LF-24 can also be known as a low loss SMA plug to N type plug cable assembly and will be shipped same-day as it is purchased. SMA plug to type N plug cable assembly PE3C0121LF-24 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency SMA male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0121LF-24 can also be used in the other direction and will be type N male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to N type cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male low loss cable 24 inch length using LMR-195 coax with Times Microwave components, LF solder. |
| 2,336 | ||
| PE3W14012-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm. SMA Male to SSMA Male Right Angle Cable 12 Inch Length Using RG188-DS Coax., Radio frequency assembly SMA male to SSMA male right angle cable 12 inch length using RG188-DS coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SSMA male right angle cable 12 inch length using RG188-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SSMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a right angle SSMA cable connection on the other. Our SMA to right angle SSMA cable assembly has a male gender on end 1 and a male on end 2. PE3W14012-12 can also be known as a SMA plug to right angle SSMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3W14012-12 RF cable has a PTFE jacket of 0.118-inch diameter. The flexible RF cable has a between series connection. SMA plug to SSMA plug cable assembly PE3W14012-12 is built with RG188-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SSMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W14012-12 can also be used in the other direction and will be a right angle SSMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SSMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SSMA cable assembly for quick shipment worldwide. Variations of SMA and SSMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SSMA RF cable assembly as per your requirements. |
| 71 | ||
| PE3M0121-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/28-RG058-0XDS2, RF Cable Type: M17/28-RG058, RF Cable Impedance: 50 Ohm, Length: 18 inches. MIL-DTL-17 SMA Male Right Angle to SMA Male Right Angle Cable 18 Inch Length Using M17/28-RG58 Coax., Radio frequency assembly MIL-DTL-17 SMA male right angle to SMA male right angle cable 18 inch length using M17/28-RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 SMA male right angle to SMA male right angle cable 18 inch length using M17/28-RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/56-3129 SMA to M39012/56-3129 SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle M39012/56-3129 SMA cable connection on one end and right angle M39012/56-3129 SMA cable connection on the other. Our right angle M39012/56-3129 SMA to right angle M39012/56-3129 SMA cable assemblies have a male gender on end 1 and male on end 2. This M39012/56-3129 SMA to M39012/56-3129 SMA cable is a male to male coax assembly, PE3M0121-18, can also be known as a MIL-DTL-17/MIL-C-17 right angle M39012/56-3129 SMA plug to right angle M39012/56-3129 SMA plug cable assembly and will be shipped same-day as it is purchased. M39012/56-3129 SMA plug to M39012/56-3129 SMA plug cable assembly PE3M0121-18 is built with M17/28-RG058 which is a flexible coax type. The Pasternack flexible M39012/56-3129 SMA cable assembly is manufactured with right angle M39012/56-3129 SMA to right angle M39012/56-3129 SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this MIL-C-17 1 GHz maximum frequency M39012/56-3129 SMA right angle male to M39012/56-3129 SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. M39012/56-3129 SMA right angle plug to M39012/56-3129 SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/56-3129 SMA to M39012/56-3129 SMA cable assembly for quick shipment worldwide. Variations of M39012/56-3129 SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 SMA male right angle to SMA male right angle cable 18 inch length using M17/28-RG58 coax. |
| 24 | ||
| PE3C100012-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Passivated, RF Cable Part Number: PE-R200LL, RF Cable Type: PE-R200LL, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Male to SMA Female Bulkhead Low Loss Space Cable 18 Inch Length Using PE-R200LL Coax., Radio frequency assembly SMA male to SMA female bulkhead low loss space cable 18 inch length using PE-R200LL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA female bulkhead low loss space cable 18 inch length using PE-R200LL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss space cable assembly is built with a SMA cable connection on one end and a SMA bulkhead cable connection on the other. Our low loss space SMA to SMA cable assembly has a male gender on end 1 and a female on end 2. PE3C100012-18 can also be known as a low loss space SMA plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.437-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. SMA low loss space cable assemblies from Pasternack are ideal for applications including vacuum environments, low earth orbit (leo), space (exploration, launches, maintenance, stations), ground systems and satellites. The minimum bend radius for this cable is 1.08 inches, allowing for a single bend without damaging the cable. Our PE3C100012-18 RF cable has a ETFE jacket of 0.216-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 150 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 82% and a minimum RF shielding of 100 dB. Our SMA male to bulkhead SMA female cable has a maximum VSWR of 1.4:1. SMA plug to SMA jack cable assembly PE3C100012-18 is built with PE-R200LL which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a stainless steel body with passivated plating. Additional dimensions, specifications and CAD drawings for this low loss space RF cable are available on our downloadable PDF datasheet. PE3C100012-18 can also be used in the other direction and will be a SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. Low loss space SMA plug to SMA jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss space RF cable assembly as per your requirements. |
| 0 | ||
| PE3W01211-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to MMCX Jack Low Loss Cable 24 Inch Length Using LMR-100 Coax., Radio frequency assembly SMA male to MMCX jack low loss cable 24 inch length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to MMCX jack low loss cable 24 inch length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to MMCX cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a MMCX cable connection on the other. Our low loss a SMA to a MMCX cable assembly has male gender on end 1 and jack on end 2. PE3W01211-24 can also be known as a low loss SMA plug to MMCX female cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01211-24 RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMA plug to MMCX female cable assembly PE3W01211-24 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to MMCX cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W01211-24 can also be used in the other direction and will be MMCX jack to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to MMCX female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to MMCX cable assembly for quick shipment worldwide. Variations of SMA and MMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to MMCX low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W01214 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. TNC Male to TNC Male Cable Using LMR-400-UF Coax. PE3W01214 is a TNC male to TNC male cable using LMR-400-UF coax. This Pasternack TNC male to TNC male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our male TNC to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01214 TNC male to TNC male cable assembly is constructed with LMR-400-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W01213 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. MMCX Plug to MCX Jack Cable Using RG174 Coax., Radio frequency assembly MMCX plug to MCX jack cable using RG174 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The MMCX plug to MCX jack cable using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MMCX to MCX cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a MMCX cable connection on one end and a MCX cable connection on the other. Our MMCX to MCX cable assembly has a plug gender on end 1 and a jack on end 2. PE3W01213 can also be known as a MMCX male to MCX female cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE (LD) dielectric type. Our PE3W01213 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 80 degrees C. The flexible RF cable has a between series connection. MMCX male to MCX female cable assembly PE3W01213 is built with RG174 which is a flexible coax type. The Pasternack flexible MMCX cable assembly is manufactured with MMCX to MCX cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W01213 can also be used in the other direction and will be a MCX jack to MMCX plug cable assembly if the opposite connectivity is required. MMCX male to MCX female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MMCX to MCX cable assembly for quick shipment worldwide. Variations of MMCX and MCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MMCX to MCX RF cable assembly as per your requirements. | 0 | |||
| PE3W01213-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. MMCX Plug to MCX Jack Cable 12 Inch Length Using RG174 Coax., Radio frequency assembly MMCX plug to MCX jack cable 12 inch length using RG174 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The MMCX plug to MCX jack cable 12 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MMCX to MCX cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a MMCX cable connection on one end and a MCX cable connection on the other. Our MMCX to MCX cable assembly has a plug gender on end 1 and a jack on end 2. PE3W01213-12 can also be known as a MMCX male to MCX female cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE (LD) dielectric type. Our PE3W01213-12 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 80 degrees C. The flexible RF cable has a between series connection. MMCX male to MCX female cable assembly PE3W01213-12 is built with RG174 which is a flexible coax type. The Pasternack flexible MMCX cable assembly is manufactured with MMCX to MCX cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W01213-12 can also be used in the other direction and will be a MCX jack to MMCX plug cable assembly if the opposite connectivity is required. MMCX male to MCX female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MMCX to MCX cable assembly for quick shipment worldwide. Variations of MMCX and MCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MMCX to MCX RF cable assembly as per your requirements. |
| 0 | ||
| PE3W01218/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm. MMCX Plug Right Angle to N Female Bulkhead Cable Using PE-C100-LSZH Coax with HeatShrink. PE3W01218/HS is a MMCX plug right angle to N female bulkhead cable using PE-C100-LSZH coax. This Pasternack MMCX plug right angle to N female bulkhead cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm N for connector 2. MMCX right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MMCX right angle to female N bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01218/HS MMCX plug right angle to N female bulkhead cable assembly is constructed with PE-C100-LSZH coax. | 0 | |||
![]() Relay Specialties | VX-012-1C23 | OMRON Corporation | Snap-Action Switches; 100mA SPDT; Hinge Lever 30 VDC; QC - 0.187" (4.7mm) RoHS : Compliant |
| 73 | |
| BB2-B0-26-610-121-D | Carling Technologies | Mag / Hyd CB; 2 Pole(s) Handle - UL 1077 Recognized Handle, one per unit; 10.000 A RoHS : Compliant |
| 70 | ||
| 4030-12-1000 | Coto Technology USA | Reed Relay |
| 21 | ||
| CA2-B0-34-630-121-D | Carling Technologies | MAGNETIC/HYDRAULIC CIRCUIT BRE RoHS : Compliant |
| 16 | ||
| 3570-1210-053 | Comus International | Reed Relay |
| 10 | ||
| BB2-B0-36-630-121-C | Carling Technologies | Mag / Hyd CB; 2 Pole(s) Handle - UL 1077 Recognized Handle, one per unit; 30.000 A RoHS : Compliant |
| 5 | ||
| 1012-1-E-2-B | Kanson Electronics Inc | Time Delay Relay; Off Delay 120 V AC, 50/60 Hz; DPDT 12 pin socket; Plug-in |
| 1 | ||
![]() TE Connectivity | 170121-1 | TE Connectivity | MATE-N-LOK SKT L.P. Contact Mating Area Plating Material: Tin (Sn) Contact Type: Socket Wire Contact Termination Area Plating Material: Pre-Tin Wire Size: 20 – 14 AWG Operating Voltage: 250 VAC Tin (Sn) Socket Pre-Tin 20 – 14 AWG | TE Connectivity RoHS : Compliant |
| 37,489 | |
| 170121-4 | TE Connectivity | M-N-L SKT Contact Mating Area Plating Material: Tin (Sn) Contact Type: Socket Wire Contact Termination Area Plating Material: Pre-Tin Wire Size: 20 – 14 AWG Operating Voltage: 250 VAC Tin (Sn) Socket Pre-Tin 20 – 14 AWG | TE Connectivity RoHS : Compliant |
| 17,824 | ||
| 1863012-1 | TE Connectivity | 01P UMNL CAP HSG Number of Positions: 1 Connector & Housing Type: Cap Connector Product Type: Housing Termination Method to Wire & Cable: Crimp Connector System: Wire-to-Wire Ampseal Header | 1 Cap Housing Crimp | TE Connectivity RoHS : Compliant |
| 4,466 | ||
| 3627322520121K | TE Connectivity | 3627 322520 120UH 10% Inductance: 120 µH Current Rating (Max): 75 mA DC Resistance: 8 Ω Passive Component Tolerance: 10 % Shielded: No 120 µH 75 mA 8 Ω 10 % | TE Connectivity RoHS : Compliant |
| 1,000 | ||
| 106012-1 | TE Connectivity | Z-PACK/C RAMH. 55P. PCB Connector Type: PCB Mount Header Data Rate: ≤1 Gb/s Number of Columns: 6 Number of Rows: 5 Backplane Architecture: Mezzanine PCB Mount Header ≤1 Gb/s 6 5 | TE Connectivity RoHS : Compliant |
| 783 | ||
| 1-1415012-1 | TE Connectivity | V23047-A1110-A501 Relay & Contactor Type: Force-Guided Relay Current Type: DC Coil Magnetic System: Monostable Contact Arrangement: 2 Form C DPDT-CO Contact Current Rating: 6 A Force-Guided Relay DC Monostable 2 Form C DPDT-CO | TE Connectivity RoHS : Compliant |
| 337 | ||
| 55PC0121-16-6/9 | TE Connectivity | 55PC0121-16-6/9 Cable Type: Spec 55 Operating Voltage: 600 VAC Wire & Cable Insulation Material: Modified Radiation Cross-linked ETFE Polymer Conductor Material: Tin-Coated Copper Wire Size: 16 AWG Spec 55 600 VAC Modified Radiation Cross-linked ETFE Polymer Tin-Coated Copper | 16 AWG | TE Connectivity RoHS : Compliant |
| 268 | ||
| AEDC113NN00001215000 | TE Connectivity | 623 RECEPTACLE ANGLED ROTATABLE Connector System: Cable-to-Panel Circular Connector Type: Circular Connector Receptacle Number of Positions: 17 Circular Connector Shell Size: 23 Sealable: No Cable-to-Panel Circular Connector Receptacle 17 23 | Ampseal Header | TE Connectivity RoHS : Compliant |
| 239 | ||
| 55PC0121-20-0/9 | TE Connectivity | 55PC0121-20-0/9 Cable Type: Spec 55 Operating Voltage: 600 VAC Wire & Cable Insulation Material: Modified Radiation Cross-linked ETFE Polymer Conductor Material: Tin-Coated Copper Wire Size: 20 AWG Spec 55 600 VAC Modified Radiation Cross-linked ETFE Polymer Tin-Coated Copper | 20 AWG | TE Connectivity RoHS : Compliant |
| 143 | ||
| 1658012-1 | TE Connectivity | MSB0.80RC-ASY040FL,-,10,-TY TE Connectivity RoHS : Compliant |
| 85 | ||
| 382A012-100-0 | TE Connectivity | 382A012-100-0 Molded Part Shape: Y Shape Number of Branches: 3 Material Code: 100 Material Systems Code: 100 Adhesive Requirement: Adhesive Purchased Separately Y Shape 3 100 | TE Connectivity RoHS : Compliant |
| 75 | ||
| 2273012-1 | TE Connectivity | M8 x 1.0 Angled socket Pigtail LED Cable Assembly Type: M8 Pigtail Number of Positions: 4 Cable Assembly Length: 1.5 m Cable Assembly Length: 4.9 ft M8/M12 Application Type: Sensor/Actuator M8 Pigtail 4 1.5 m 4.9 ft | TE Connectivity RoHS : Compliant |
| 45 | ||
| 1-2273012-1 | TE Connectivity | M8 x 1.0 Angled socket Pigtail LED Cable Assembly Type: M8 Pigtail Number of Positions: 4 Cable Assembly Length: 1.5 m Cable Assembly Length: 4.9 ft M8/M12 Application Type: Sensor/Actuator M8 Pigtail 4 1.5 m 4.9 ft | TE Connectivity RoHS : Compliant |
| 32 | ||
| 194012-1 | TE Connectivity | PIN ASSY..070 PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 9 Number of Rows: 3 PCB Mount Header Vertical Wire-to-Board 9 | Ampseal Header | TE Connectivity RoHS : Compliant |
| 19 | ||
| T4130012121-000 | TE Connectivity | M12,REAR MOUNT,MALE,A,12P,SOLDER WIRE Connector System: Wire-to-Panel Circular Connector Type: Circular Connector Plug Number of Positions: 12 Circular Connector Shell Size: 18 Sealable: Yes Wire-to-Panel Circular Connector Plug 12 18 | Ampseal Header | TE Connectivity RoHS : Compliant |
| 11 | ||
![]() Venkel Ltd. | C0603C0G500-121FNE![]() | VENKEL LTD | Chip Capacitor;0603;C0G;50V;120pF;�1% RoHS : Compliant | 19,000 | ||
| MLF2012-120KT | VENKEL LTD | Multilayer Chip Inductor;0805;12uH;�10% RoHS : Compliant | 5,400 | |||
| C0201X7R250-121KNP | VENKEL LTD | Chip Capacitor;0201;X7R;25V;120pF;�10% RoHS : Compliant | 0 | |||
C0402C0G250-121KNP![]() | VENKEL LTD | Chip Capacitor;0402;C0G;25V;120pF;�10% RoHS : Compliant | 0 | |||
C1210C0G500-121JNE![]() | VENKEL LTD | Chip Capacitor;1210;C0G;50V;120pF;�5% RoHS : Compliant | 0 | |||
C1210C0G500-121KNE![]() | VENKEL LTD | Chip Capacitor;1210;C0G;50V;120pF;�10% RoHS : Compliant | 0 | |||
| MLF2012-101MT | VENKEL LTD | Multilayer Chip Inductor;0805;100uH;�20% RoHS : Compliant | 0 | |||
C0805X7R500-121JNP![]() | VENKEL LTD | Chip Capacitor;0805;X7R;50V;120pF;�5% RoHS : Compliant | 0 | |||
C0805X7R500-121KNE![]() | VENKEL LTD | Chip Capacitor;0805;X7R;50V;120pF;�10% RoHS : Compliant | 0 | |||
C0402C0G250-121JNP![]() | VENKEL LTD | Chip Capacitor;0402;C0G;25V;120pF;�5% RoHS : Compliant | 0 | |||
C0402C0G250-121KNE![]() | VENKEL LTD | Chip Capacitor;0402;C0G;25V;120pF;�10% RoHS : Compliant | 0 | |||
| SSPI474720-121NU | VENKEL LTD | Square Shielded Power Inductor;474720;120uH;�30% RoHS : Not Compliant | 0 | |||
| C0201C0G500-121JNP | VENKEL LTD | Chip Capacitor;0201;C0G;50V;120pF;�5% RoHS : Compliant | 0 | |||
C0402C0G250-121JNE![]() | VENKEL LTD | Chip Capacitor;0402;C0G;25V;120pF;�5% RoHS : Compliant | 0 | |||
| MLF2012-1R8KT | VENKEL LTD | Multilayer Chip Inductor;0805;1.8uH;�10% RoHS : Compliant | 0 | |||
![]() Vyrian | 4303.0001.21 | Schurter Ag | 46,550 | |||
| 3403.0012.11 | Schurter Ag | 7,800 | ||||
| 350-80-106-00-012101 | PRECI-DIP SSA | RoHS : Compliant | 4,600 | |||
| 44A0121-16-90/92 | TE Connectivity | Wire And Cable, 2 Conductor(s), 16AWG, 600V, Flexible Cord And Fixture Wire RoHS : Compliant | 2,800 | |||
| 55A0121-24-9/96CS2275 | TE Connectivity | Wire And Cable, 2 Conductor(s), 24AWG, 600V, Flexible Cord And Fixture Wire RoHS : Compliant | 2,600 | |||
| 55A0121-22-9/96 | TE Connectivity | Wire And Cable, 2 Conductor(s), 22AWG, 600V, Flexible Cord And Fixture Wire RoHS : Compliant | 1,800 | |||
| 350-10-117-00-012101 | PRECI-DIP SSA | RoHS : Compliant | 800 | |||
| 2801219 | Phoenix Contact | Surge Arrestors RoHS : Compliant | 670 | |||
| 5962-01-218-1995 | Texas Instruments | Memory Circuit, MOS, PDIP24 RoHS : Not Compliant | 140 | |||
| 5962-01-218-8483 | Texas Instruments | OTP ROM, 512X8, 75ns, TTL, CDIP20 RoHS : Not Compliant | 130 | |||
| 5962-01-216-6951 | Texas Instruments | Peripheral Driver, 2 Driver, BIPolar, CDIP8 RoHS : Not Compliant | 130 | |||
| 5962-01-218-8479 | Texas Instruments | OTP ROM, 512X8, 75ns, TTL, CDIP20 RoHS : Not Compliant | 110 | |||
| 5962-01-214-2155 | Texas Instruments | OTP ROM, 512X8, 85ns, TTL, CDIP20 RoHS : Not Compliant | 100 | |||
| 5962-01-214-2154 | Texas Instruments | OTP ROM, 512X8, 85ns, TTL, CDIP20 RoHS : Not Compliant | 95 | |||
| 40C-898393000121977 | Intel Corporation | 11 | ||||
![]() Waytek, Inc. | 19070-0121 | Molex | 12-10 GA #8 Ring Terminal Yellow Insulated Vinyl RoHS : Compliant |
| 3,736 | |
| 39012100 | Molex | 10 Pin Receptacle Mini-Fit JR MOLEX PN 39012100 RoHS : Compliant |
| 408 | ||
| 680-12180559 | Rennsteig Tools Inc | Removal Tool Metri-Pack 150 & 280 PULL TO SEAT 12180559 DUCON GT 150 J-38125-559 |
| 10 | ||
| 99-0121 | Trombetta | J1939 8 Place Splitter (2)12 Pin DT Connector Cavity |
| 0 | ||
![]() Win Source Electronics | MPH201210H2R2MT | Sunlord |
| 375,535 | ||
| NX30P0121UK | Nexperia | Power Switch 1:1 10-UFQFN |
| 120,778 | ||
| ACM2012-121-2P-T002 | TDK Corporation | CMC 370MA 2LN 120 OHM SMD RoHS : Compliant |
| 120,560 | ||
| NX30P0121UKZ | Nexperia | IC PWR SWITCH N-CHAN 1:1 12WLCSP / Power Switch/Driver 1:1 N-Channel 3A 12-WLCSP (1.65x1.25) |
| 114,100 | ||
| HF3FF/012-1ZST | Xiamen Hongfa Electroacoustic Co.,Ltd. | 12V Through Hole,19x15.2mm Power Relays RoHS RoHS : Compliant |
| 50,000 | ||
| HFD23/012-1ZS | Xiamen Hongfa Electroacoustic Co.,Ltd. | Relay HFD23/012-1ZS, 2A, coil voltage 12V DC, changeover contact (1C), coil power: 150mW, 1A/30V DC, 0.5A/125VAC RoHS : Compliant |
| 40,000 | ||
| RLB9012-102KL | Bourns Inc | FIXED IND 1MH 510MA 2.9 OHM TH RoHS : Compliant |
| 35,800 | ||
| FSMD010-1210-R | Fuzetec Technology Co Ltd | Surface Mount PTC Resettable Fuse RoHS : Compliant |
| 30,000 | ||
| DFE201210U-R47M=P2 | Murata Manufacturing Co Ltd | FIXED IND 470NH 3A 42 MOHM SMD RoHS : Compliant |
| 30,000 | ||
| 35F0121-0SR-10 | Qnity Laird | FERRITE BEAD 41 OHM 2SMD 1LN RoHS : Compliant |
| 20,000 | ||
| 629104190121 | Wurth Elektronik | CONN RCPT USB2.0 TYPEA 4P SMD RA RoHS : Compliant |
| 16,100 | ||
| PSMN012-100YS | Nexperia | N-channel 100V 12mΩ standard level MOSFET in LFPAK RoHS : Compliant |
| 12,398 | ||
| HFKW/012-1ZW | Xiamen Hongfa Electroacoustic Co.,Ltd. | Relay HFKW/012-1ZW, 35A, coil voltage 12 VDC, changeoveer contact (1C), coil power 600mW, 20A/12VDC |
| 12,000 | ||
| 0039012105 | Molex | CONN RCPT HSG 10POS 4.20MM / 10 Rectangular Connectors - Housings Receptacle Natural 0.165" (4.20mm) RoHS : Compliant |
| 3,580 | ||
| LPTM10-12107-3FTG208I | Lattice Semiconductor Corporation | IC PLATFORM MANAGER 208FTGBA RoHS : Compliant |
| 577 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |