| Electronic Components Datasheet Search |
|
0272ACNRMNFZCWC Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Rochester Electronics | UBA20272T/1,518![]() | NXP Semiconductors | Lighting and Ballast Controller CFL/TL Controller 20-SOIC T/R RoHS : Compliant |
| 45,975 | |
| S99-50272 | Infineon Technologies AG | IC MEMORY 56-SOP Tray RoHS : Compliant |
| 119 | ||
| XC3164-5PP132C0272 | AMD Xilinx | FPGAs XC3000 46064b 4.25V 110 I/O 132-PGA RoHS : Not Compliant |
| 64 | ||
CY7C027-20AC![]() | Cypress Semiconductor | SRAM 512kbit 32k x 16 4.5V - 5.5V Parallel 20ns 100-QFP Tube RoHS : Not Compliant |
| 3 | ||
| MIC2027-2BM | Micrel Inc | Power Distribution Switch USB Switch N-Channel 4 OUT High Side 16-SOIC Tube RoHS : Not Compliant |
| 34,438 | ||
| MIC2027-2BN | Micrel Inc | Power Distribution Switch USB Switch N-Channel 4 OUT High Side 8-DIP RoHS : Not Compliant |
| 3,139 | ||
| MIC2027-2BWM | Micrel Inc | Power Distribution Switch USB Switch N-Channel 4 OUT High Side 16-SOIC Tube RoHS : Not Compliant |
| 3,909 | ||
| MIC2027-2YM | Micrel Inc | Power Distribution Switch USB Switch N-Channel 4 OUT High Side 16-SOIC Tube RoHS : Compliant |
| 496 | ||
| LM3444MM/S7002725 | National Semiconductor Corporation | LED Driver ICs AC DC Offline Switcher 2A 10-SOP T/R RoHS : Compliant |
| 96,000 | ||
![]() Coilcraft Direct | XAL7030-272MEC | Coilcraft Inc | Power inductor, shielded, 20% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 4,260 | |
| XAR7030-272MEC | Coilcraft Inc | Power Inductor, shielded, composite core, 20% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 396 | ||
| RFB0810-272L | Coilcraft Inc | Power inductor, 10% tol, RoHS RoHS : Compliant |
| 16 | ||
| RFB1010-272L | Coilcraft Inc | Power inductor, 10% tol, RoHS RoHS : Compliant |
| 0 | ||
| SER1360-272KLD | Coilcraft Inc | Power inductor, high current, 10% tol, SMT, RoHS RoHS : Compliant |
| 0 | ||
| XEL6060-272MEC | Coilcraft Inc | Power inductor, shielded, 20% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 0 | ||
![]() ComSIT USA | PH480272T005I01Q | Powertip Technology Corporation | AVAILABLE EU | 128 | ||
| XEL6060272MEC | COI | AVAILABLE EU | 878 | |||
![]() ComSIT USA | RNLB08G0272B0E | Royal Electronic Factory (Thailand) Co Ltd | RESISTOR NETWORK Array/Network Resistor, Isolated, Metal Glaze/thick Film, 2700ohm, 100V, 2% +/-Tol, 200ppm/Cel, Through Hole Mount RoHS : Compliant | 2,000 | ||
| 0272500V | Littelfuse Inc | VERY FAST-ACTING RADIAL LEAD FUSE Electric Fuse, Very Fast Blow, 0.5A, 125VAC, 125VDC, 100000A (IR), Through Hole, MICRO RoHS : Compliant | 1,413 | |||
| CG6830272230485 | Bosch Sensortec | Ignition Coil, automotive, for spark generation in internal combustion engines RoHS : Not Compliant | 500 | |||
| 31880272 | TE Connectivity | HDP-20 SIZE 3 RIGHT ANGLE RECEPTACLE HEADER; EUROSTYLE PLUS WITH BOARD LOCKS D Subminiature Connector, 25 Contact(s), Female, 0.109 inch Pitch, Solder Terminal, #4-40unc, Receptacle RoHS : Not Compliant | 480 | |||
| 520302729 | Molex | 1.0 FPC CONN ZIF(ST) FFC/FPC Connector, 27 Contact(s), 1 Row(s), Female, Straight, Solder Terminal RoHS : Compliant | 400 | |||
![]() NexGen Digital | C1206X7R500-272KNE![]() | VENKEL LTD | RoHS : Compliant | 2,000 | ||
| 1210-272J | API Delevan | RoHS : Not Compliant | 116 | |||
| 0272.050V | Littelfuse Inc | RoHS : Compliant | 10 | |||
![]() PEI Genesis | 23A02720-3 | SOURIAU-SUNBANK |
| 0 | ||
| 23A02720-34 | SOURIAU-SUNBANK |
| 0 | |||
| DS81027-21GAM | SOURIAU-SUNBANK |
| 0 | |||
| 002728-0003 | ITT Interconnect Solutions |
| 0 | |||
| 23A02720-16 | SOURIAU-SUNBANK |
| 0 | |||
| 002720-0003 | ITT Interconnect Solutions |
| 0 | |||
| 002725-0023 | ITT Interconnect Solutions |
| 0 | |||
| 002727-0058 | ITT Interconnect Solutions |
| 0 | |||
| 5020.027.210 | FLEXA GmbH & Co Produktion und Vertrieb KG |
| 0 | |||
| 002728-0016 | ITT Interconnect Solutions |
| 0 | |||
| 002723-0006 | ITT Interconnect Solutions |
| 0 | |||
| 002726-0003 | ITT Interconnect Solutions |
| 0 | |||
| 002728-0038 | ITT Interconnect Solutions |
| 0 | |||
| 002723-0017 | ITT Interconnect Solutions |
| 0 | |||
| 10272-DBL | Pico Tools |
| 0 | |||
![]() Chip 1 Exchange | SP000272112 | INSTOCK | 10,000 | |||
| ECWH20272HVB | INSTOCK | 5,000 | ||||
| AN20CD0272JBA | INSTOCK | 5,000 | ||||
| ECWH20272HVB | Panasonic Electronic Components | INSTOCK RoHS : Compliant | 4,000 | |||
| A4N2027277 | Otto | INSTOCK | 970 | |||
| PH480272T-001-IP1Q | POWER | INSTOCK | 151 | |||
| NK-FB00272 | INSTOCK | 147 | ||||
| PH480272T-001-IP1Q | EUROC | INSTOCK | 103 | |||
| 102725- | INSTOCK | 25 | ||||
| 802-7241642 | INSTOCK | 20 | ||||
![]() Braemac Americas-Symmetry | AIUR-10-272K![]() | Abracon Corporation | RoHS : Compliant |
| 0 | |
| ACMP-Q9050-272-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ACMP-9050-272-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
![]() EBV Elektronik | SW006027-2 | Microchip Technology Inc | MPLAB Analysis Tool Workstation License (Alt: SW006027-2) RoHS : Compliant | 0 | ||
| MIC2027-2YM | Microchip Technology Inc | (Alt: MIC2027-2YM) RoHS : Compliant | 0 | |||
| ZL40272LDF1 | Microchip Technology Inc | ZL40272LDF1 12Output PCIe HCSL Fanout Buffers with Individual Output Enable (Alt: ZL40272LDF1) RoHS : Compliant | 0 | |||
| ZL40272LDG1 | Microchip Technology Inc | (Alt: ZL40272LDG1) RoHS : Compliant | 0 | |||
| S00027220757 | SIMCom | GPSGLONASS Ceramic Module Antenna (Alt: S00027220757) RoHS : Not Compliant | 0 | |||
| ZL30272LDG1S | Microchip Technology Inc | (Alt: ZL30272LDG1S) RoHS : Compliant | 0 | |||
| CY7C027-20AXC | Infineon Technologies AG | SRAM Chip Async Dual 5V 512KBit 32K x 16 20ns 100Pin TQFP Tube (Alt: SP005819076) RoHS : Compliant | 0 | |||
| SGM4027-2.5XN3LG/TR | SG Micro Corp | SGCSGM402725XN3LGTR VOLTAGE REFERENCE (Alt: SGM4027-2.5XN3LG/TR) RoHS : Compliant | 0 | |||
| SGM4027-2.048XN3LG/TR | SG Micro Corp | (Alt: SGM4027-2.048XN3LG/TR) RoHS : Compliant | 0 | |||
![]() Flip Electronics | S99-50272 | Infineon Technologies AG | Stock | 6,757 | ||
| CY7C027-20AXC | Infineon Technologies AG | Stock, Ship Today |
| 5 | ||
| CY7C027-20AXCT | Cypress Semiconductor | Stock RoHS : Compliant | 5 | |||
![]() Maritex | CFR0S4J0272A50 | Royal Electronic Factory (Thailand) Co Ltd | Miniature resistor RM; 2.7 kOhm; 5%; 1/4W; 1.85x3.5mm RoHS : Compliant |
| 3,699 | |
| 5027256522 | Molex | Connectors Accessories; 5027256522; MOLEX |
| 112 | ||
![]() Pasternack Enterprises US | PE3W06027-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to SMA Male Cable 24 Inch Length Using PE-SR405AL Coax., Radio frequency assembly SMA male to SMA male cable 24 inch length using PE-SR405AL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable 24 inch length using PE-SR405AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assembly has male gender on end 1 and male on end 2. PE3W06027-24 can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.050 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMA plug to SMA plug cable assembly PE3W06027-24 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this PE3W06027-24 RF cable are available on our downloadable PDF datasheet. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. |
| 214 | |
| PE3C10272-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-LLPX, RF Cable Type: LMR-400-LLPX, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Plenum BNC Male to SMA Male Low Loss Cable 48 Inch Length Using LMR-400-LLPX Coax with Times Microwave Components., Radio frequency assembly plenum BNC male to SMA male low loss cable 48 inch length using LMR-400-LLPX coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The plenum BNC male to SMA male low loss cable 48 inch length using LMR-400-LLPX coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a SMA cable connection on the other. Our low loss a BNC to a SMA cable assembly has male gender on end 1 and male on end 2. PE3C10272-48 can also be known as a low loss BNC plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PTFE (LD) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10272-48 RF cable has a Fluoropolymer jacket of 0.370-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 90 dB. BNC plug to SMA plug cable assembly PE3C10272-48 is built with LMR-400-LLPX which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to SMA cable connectors and has a 50 Ohm impedance, and is double shielded. One connector features the crimp/non-solder contact attachment method and a brass body with tri-metal plating, while the other has the crimp/solder attachment method and brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10272-48 can also be used in the other direction and will be SMA male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to SMA cable assembly for quick shipment worldwide. Variations of BNC and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 47 | ||
| PE3M0272-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: M39029, Connector 1 Size: 8, Connector 1 Gender: Pin, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Specification: MIL-STD-348, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FL, RF Cable Type: Coax, RF Cable Specification: PE-SR405FL datasheet, RF Cable Impedance : 50 Ohm. MIL Size 8 D38999 Contact Pin to SMA Male Cable 24 Inch Length Using PE-SR405FL Coax with HeatShrink, LF Solder. The PE3M0272-24 from Pasternack is a D38999 contact cable assembly that is built with a size 8 M39029 pin contact connection on one end and a SMA male connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This M39029 to SMA cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 3 GHz. This radio frequency cable assembly can withstand temperatures ranging from -65 to 125 degrees C. Our M39029 pin to SMA male cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0272-24 in-series RF cable has 0.78 inches of repeated minimum bend radius. M39029 pin to SMA male cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack PE3M0272-24 formable cable assembly has a 50 Ohm impedance and is single shielded. Additional dimensions, specifications, and CAD drawings for this M39029 to SMA RF cable are available on our downloadable PDF datasheet. M39029 pin to SMA male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of M39029 and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal M39029 to SMA RF cable assembly as per your requirements. |
| 33 | ||
| PE3M0272-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: M39029, Connector 1 Size: 8, Connector 1 Gender: Pin, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Specification: MIL-STD-348, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FL, RF Cable Type: Coax, RF Cable Specification: PE-SR405FL datasheet, RF Cable Impedance : 50 Ohm. MIL Size 8 D38999 Contact Pin to SMA Male Cable 12 Inch Length Using PE-SR405FL Coax with HeatShrink, LF Solder. The PE3M0272-12 from Pasternack is a D38999 contact cable assembly that is built with a size 8 M39029 pin contact connection on one end and a SMA male connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This M39029 to SMA cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 3 GHz. This radio frequency cable assembly can withstand temperatures ranging from -65 to 125 degrees C. Our M39029 pin to SMA male cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0272-12 in-series RF cable has 0.78 inches of repeated minimum bend radius. M39029 pin to SMA male cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack PE3M0272-12 formable cable assembly has a 50 Ohm impedance and is single shielded. Additional dimensions, specifications, and CAD drawings for this M39029 to SMA RF cable are available on our downloadable PDF datasheet. M39029 pin to SMA male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of M39029 and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal M39029 to SMA RF cable assembly as per your requirements. |
| 33 | ||
| PE3TC0302-72 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-90TEST, RF Cable Type: PE-TC151, RF Cable Impedance: 50 Ohm, Length: 72 inches. PE-TC151 Series Phase Stable Test Cable N Male to N Male to 18 GHz 72 Inch Length ,RoHS., Radio frequency assembly PE-TC151 series phase stable test cable N male to N male to 18 GHz 72 inch length ,RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. PE-TC151 series phase stable test cable N male to N male to 18 GHz 72 inch length ,RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax precision cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our precision N type to type N cable assemblies have a male gender on end 1 and male on end 2. This type N to N type cable is a male to male coax assembly, PE3TC0302-72, can also be known as a precision type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to N type plug cable assembly PE3TC0302-72 is built with PE-TC151 which is a formable coax type. The Pasternack formable N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency N type male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Precision type N plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this PE-TC151 series phase stable test cable N male to N male to 18 GHz 72 inch length ,RoHS. |
| 3 | ||
| PE3W10272LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Mini UHF, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. N Male to Mini UHF Female Cable Using RG58 Coax with HeatShrink, LF Solder. PE3W10272LF/HS is a N male to Mini UHF female cable using RG58 coax. This Pasternack N male to Mini UHF female cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm Mini UHF for connector 2. Our male N to female Mini UHF cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10272LF/HS N male to Mini UHF female cable assembly is constructed with RG58 coax. | 0 | |||
| PE3C4027-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: MMBX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 24 inches. Snap-On MMBX Plug to SMA Male Right Angle Cable 24 Inch Length Using RG316 Coax., Radio frequency assembly snap-on MMBX plug to SMA male right angle cable 24 inch length using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Snap-on MMBX plug to SMA male right angle cable 24 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMBX to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MMBX cable connection on one end and right angle SMA cable connection on the other. Our MMBX to right angle SMA cable assemblies have a plug gender on end 1 and male on end 2. This MMBX to SMA cable is a plug to male coax assembly, PE3C4027-24, can also be known as a MMBX male to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. MMBX male to SMA plug cable assembly PE3C4027-24 is built with RG316 which is a flexible coax type. The Pasternack flexible MMBX cable assembly is manufactured with MMBX to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency MMBX plug to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4027-24 can also be used in the other direction and will be right angle SMA male to MMBX plug cable assembly if the opposite connectivity is required. MMBX male to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMBX to SMA cable assembly for quick shipment worldwide. Variations of MMBX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this snap-on MMBX plug to SMA male right angle cable 24 inch length using RG316 coax. |
| 0 | ||
| PE3W02724/PH90 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. N Male Right Angle to 7/16 DIN Male Right Angle Cable Using LMR-400 Coax with 90 Deg. Clock. PE3W02724/PH90 is a N male right angle to 7/16 DIN male right angle cable using LMR-400 coax. This Pasternack N male right angle to 7/16 DIN male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm 7/16 DIN for connector 2. N right angle to 7/16 DIN right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male 7/16 DIN right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02724/PH90 N male right angle to 7/16 DIN male right angle cable assembly is constructed with LMR-400 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE35027-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Jack, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Reverse Polarity SMA Plug Right Angle to Reverse Polarity SMA Jack Bulkhead Cable 24 Inch Length Using RG174 Coax., Radio frequency assembly reverse polarity SMA plug right angle to reverse polarity SMA jack bulkhead cable 24 inch length using RG174 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Reverse polarity SMA plug right angle to reverse polarity SMA jack bulkhead cable 24 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle reverse polarity SMA cable connection on one end and reverse polarity SMA bulkhead cable connection on the other. Our right angle reverse polarity SMA to reverse polarity SMA cable assemblies have a plug gender on end 1 and jack on end 2. PE35027-24 can also be known as a right angle reverse polarity SMA male to reverse polarity SMA female cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA male to reverse polarity SMA female cable assembly PE35027-24 is built with RG174 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this reverse polarity SMA right angle plug to reverse polarity SMA jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE35027-24 can also be used in the other direction and will be reverse polarity SMA jack bulkhead to right angle reverse polarity SMA plug cable assembly if the opposite connectivity is required. SMA reverse polarity right angle male to SMA reverse polarity female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA plug right angle to reverse polarity SMA jack bulkhead cable 24 inch length using RG174 coax. |
| 0 | ||
| PE33027-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Female Bulkhead to SMB Plug Cable 24 Inch Length Using RG316 Coax., Radio frequency assembly SMA female bulkhead to SMB plug cable 24 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female bulkhead to SMB plug cable 24 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMB cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and SMB cable connection on the other. Our SMA to SMB cable assembly has female gender on end 1 and plug on end 2. PE33027-24 can also be known as a SMA jack to SMB male cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMA jack to SMB male cable assembly PE33027-24 is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMB cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE33027-24 RF cable are available on our downloadable PDF datasheet.PE33027-24 can also be used in the other direction and will be SMB plug to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to SMB male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMB cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3W02726 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. N Female 4 Hole Flange to SMB Plug Right Angle Cable Using PE-SR405FLJ Coax. PE3W02726 is a N female 4 hole flange to SMB plug right angle cable using PE-SR405FLJ coax. This Pasternack N female 4 hole flange to SMB plug right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMB for connector 2. N to SMB right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female N 4 hole flange to plug SMB right angle cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W02726 N female 4 hole flange to SMB plug right angle cable assembly is constructed with PE-SR405FLJ coax. | 0 | |||
| PE3C0272 | Pasternack Enterprises | 0 | ||||
| PE3W02724/PH270 | Pasternack Enterprises | 0 | ||||
| PE33702-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: HN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to HN Male Cable 72 Inch Length Using RG214 Coax., Radio frequency assembly 7/16 DIN male to HN male cable 72 inch length using RG214 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male to HN male cable 72 inch length using RG214 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to HN cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 7/16 DIN cable connection on one end and a HN cable connection on the other. Our 7/16 DIN to HN cable assembly has a male gender on end 1 and a male on end 2. PE33702-72 can also be known as a 7/16 DIN plug to HN plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE33702-72 RF cable has a PVC jacket of 0.425-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -20 to 80 degrees C. The flexible RF cable has a between series connection. Our 7/16 DIN male to HN male cable has a maximum VSWR of 1.4:1. 7/16 DIN plug to HN plug cable assembly PE33702-72 is built with RG214 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to HN cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE33702-72 can also be used in the other direction and will be a HN male to 7/16 DIN male cable assembly if the opposite connectivity is required. 7/16 DIN plug to HN plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to HN cable assembly for quick shipment worldwide. Variations of 7/16 DIN and HN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to HN RF cable assembly as per your requirements. |
| 0 | ||
| PE3W20272LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to SMA Female Bulkhead Cable Using PE-047SR Coax, LF Solder. PE3W20272LF is a SMA female bulkhead to SMA female bulkhead cable using PE-047SR coax. This Pasternack SMA female bulkhead to SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our female SMA bulkhead to female SMA bulkhead cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W20272LF SMA female bulkhead to SMA female bulkhead cable assembly is constructed with PE-047SR coax. | 0 | |||
![]() TE Connectivity | 1825027-2 | TE Connectivity | FSMRA1JH04=R/A,TACT PB SW,160G SPST-NO Contact Current Rating: 50 mA Actuator Style: Round Actuator Operating Function: NO Contact Base Material: Copper Alloy Switch Contact Plating Material: Silver Tactile Switch | 50 mA Round Actuator Copper Alloy | Part Number: 1825027-2 | Internal Number: 1825027-2 | Alias Number: FSMRA1JH | TE Connectivity RoHS : Compliant |
| 35,407 | |
| 9-520272-2 | TE Connectivity | ULTRA-FAST .110/.125 ASY REC 22-18 TPBR Quick Disconnect Terminal Type: Receptacle Insulation Option: Fully Insulated Wire Size: 22 – 18 AWG Wire Size: .32 – .82 mm² Mating Tab Width: 2.8 mm 3.18 mm Receptacle Fully Insulated 22 – 18 AWG .32 – .82 mm² | Quick Disconnect | Part Number: 9-520272-2 | Internal Number: 9-520272-2 | TE Connectivity RoHS : Compliant |
| 11,881 | ||
| 1811027-2 | TE Connectivity | ASSEMBLY,18AWG TAP Primary Product Color: Blue Splice Type: Tap Splice Wire Size: 18 AWG Insulation Option: Fully Insulated Sealable: No Blue Tap Splice 18 AWG Fully Insulated | Electrical Wire Splice | Part Number: 1811027-2 | Internal Number: 1811027-2 | Alias Number: CN2455-000 | TE Connectivity RoHS : Compliant |
| 9,000 | ||
| T2111027201-001 | TE Connectivity | HMN-Q2-F Contact Type: Socket Rectangular Connector Insert Type: Insert for Contacts Pole Configuration: 2 Wire Size: 26 – 14 AWG Contact Current Rating (Max): 10 A Socket Insert for Contacts 2 26 – 14 AWG | Hdc Hmn Modular System & Rail Compliant | Part Number: T2111027201-001 | Internal Number: T2111027201-001 | TE Connectivity RoHS : Compliant |
| 175 | ||
| T2111027201-702 | TE Connectivity | HMN-Q3-F Contact Type: Socket Rectangular Connector Insert Type: Insert for Contacts Pole Configuration: 8 Wire Size: 28 – 20 AWG Contact Current Rating (Max): 5 A Socket Insert for Contacts 8 28 – 20 AWG | Hdc Hmn Modular System & Rail Compliant | Part Number: T2111027201-702 | Internal Number: T2111027201-702 | TE Connectivity RoHS : Compliant |
| 96 | ||
| T2111027201-007 | TE Connectivity | HMN-Q1-F Contact Type: Socket Rectangular Connector Insert Type: Insert for Contacts Pole Configuration: 1 Wire Size: 26 – 12 AWG Wire Size: .14 – 4 mm² Socket Insert for Contacts 1 26 – 12 AWG | Hdc Hmn Modular System & Rail Compliant | Part Number: T2111027201-007 | Internal Number: T2111027201-007 | TE Connectivity RoHS : Compliant |
| 85 | ||
| T2111027201-701 | TE Connectivity | HMN-Q2-F Contact Type: Socket Rectangular Connector Insert Type: Insert for Contacts Pole Configuration: 4 Wire Size: 26 – 14 AWG Contact Current Rating (Max): 10 A Socket Insert for Contacts 4 26 – 14 AWG | Hdc Hmn Modular System & Rail Compliant | Part Number: T2111027201-701 | Internal Number: T2111027201-701 | TE Connectivity RoHS : Compliant |
| 31 | ||
![]() Venkel Ltd. | C0603X7R250-272KNP![]() | VENKEL LTD | Chip Capacitor;0603;X7R;25V;2700pF;�10% RoHS : Compliant | 28,000 | ||
C0603X7R160-272KNE![]() | VENKEL LTD | Chip Capacitor;0603;X7R;16V;2700pF;�10% RoHS : Compliant | 28,000 | |||
C0603X7R500-272MNP![]() | VENKEL LTD | Chip Capacitor;0603;X7R;50V;2700pF;�20% RoHS : Compliant | 28,000 | |||
C0805X7R500-272JNE![]() | VENKEL LTD | Chip Capacitor;0805;X7R;50V;2700pF;�5% RoHS : Compliant | 6,000 | |||
C0805X7R500-272KNP![]() | VENKEL LTD | Chip Capacitor;0805;X7R;50V;2700pF;�10% RoHS : Compliant | 3,200 | |||
C0603X7R160-272JNE![]() | VENKEL LTD | Chip Capacitor;0603;X7R;16V;2700pF;�5% RoHS : Compliant | 0 | |||
C1206X7R500-272JNE![]() | VENKEL LTD | Chip Capacitor;1206;X7R;50V;2700pF;�5% RoHS : Compliant | 0 | |||
| AGC0603X7R500-272MNP | VENKEL LTD | Auto Grade Capacitor;0603;X7R;50V;2700pF;�20% RoHS : Compliant | 0 | |||
C1812C0G500-272JNE![]() | VENKEL LTD | Chip Capacitor;1812;C0G;50V;2700pF;�5% RoHS : Compliant | 0 | |||
C0603X7R500-272JNE![]() | VENKEL LTD | Chip Capacitor;0603;X7R;50V;2700pF;�5% RoHS : Compliant | 0 | |||
C0603X7R160-272JNP![]() | VENKEL LTD | Chip Capacitor;0603;X7R;16V;2700pF;�5% RoHS : Compliant | 0 | |||
C1206X7R500-272JNP![]() | VENKEL LTD | Chip Capacitor;1206;X7R;50V;2700pF;�5% RoHS : Compliant | 0 | |||
C1206X7R500-272KNE![]() | VENKEL LTD | Chip Capacitor;1206;X7R;50V;2700pF;�10% RoHS : Compliant | 0 | |||
| AGC0402X7R500-272KNP | VENKEL LTD | Auto Grade Capacitor;0402;X7R;50V;2700pF;�10% RoHS : Compliant | 0 | |||
| C0603X7R160-272KPBE | VENKEL LTD | Chip Capacitor;0603;X7R;16V;2700pF;�10%;Pb RoHS : Compliant | 0 | |||
![]() Vyrian | 77317-102-72LF | Amphenol Communications Solutions | Board Connector, 72 Contact(s), 2 Row(s), Female, Right Angle, 0.1 inch Pitch, Solder Terminal, Locking, Black Insulator | 17,658 | ||
| XAL7030-272MEC | Coilcraft Inc | General Purpose Inductor, 2.7uH, 20%, 1 Element, Composite-Core, SMD, 3030 RoHS : Compliant | 17,621 | |||
| FL2500272 | Diodes Incorporated | Parallel - Fundamental Quartz Crystal, 25MHz Nom | 13,603 | |||
| 1140-272K-RC | Bourns Inc | General Purpose Inductor, 2700uH, 10%, 1 Element, Ferrite-Core RoHS : Compliant | 11,875 | |||
| 5800-272-RC | Bourns Inc | General Purpose Inductor, 2700uH, 10%, 1 Element, Ferrite-Core RoHS : Compliant | 9,590 | |||
| 500002721 | Broadcom Limited | 9,570 | ||||
| TMS4027-20NL | Texas Instruments | Page Mode DRAM, 4KX1, 200ns, MOS, PDIP16 RoHS : Not Compliant | 8,246 | |||
| EVAL-CN0272-SDPZ | Analog Devices Inc | 8,234 | ||||
| 1130-272K-RC | Bourns Inc | General Purpose Inductor, 2700uH, 10%, 1 Element, Ferrite-Core RoHS : Compliant | 7,137 | |||
| MAX197BEAI-C10272 | Analog Devices (Maxim Integrated) | 6,848 | ||||
| REF020272S | Analog Devices Inc | 5,954 | ||||
| REF020272SR | Analog Devices Inc | 5,827 | ||||
| 500002727 | Broadcom Limited | 3,650 | ||||
| 0272.200V | Littelfuse Inc | Electric Fuse, Very Fast Blow, 0.2A, 125VAC, 125VDC, 100000A (IR), Through Hole, MICRO RoHS : Compliant | 541 | |||
| 2902725 | Phoenix Contact | Special Relay RoHS : Compliant | 527 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |