| Electronic Components Datasheet Search |
|
038LVD-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Component Electronics, Inc | CRCW060380K6FKEA | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Compliant |
| 5,000 | |
| CRCW06038K25FKTA | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 3,600 | ||
| CRCW0603825RFKEA | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Compliant |
| 3,000 | ||
| 103801239 | AT&T | IN STOCK SHIP TODAY | 483 | |||
| MSS1038-382NLC | Coilcraft Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 400 | ||
| CPX-100-3/8-BLACK-500 | DSG-Canusa | IN STOCK SHIP TODAY |
| 301 | ||
| 4330-030-38811 | Philips Semiconductors | IN STOCK SHIP TODAY | 246 | |||
| 21-P20386L056 | IN STOCK SHIP TODAY | 178 | ||||
| 2222-038-30102 | Vishay BCcomponents | IN STOCK SHIP TODAY |
| 126 | ||
| 0387290771 | Molex | IN STOCK SHIP TODAY |
| 79 | ||
| 21-P20386L038 | IN STOCK SHIP TODAY | 24 | ||||
| 21-P20387L043 | IN STOCK SHIP TODAY | 20 | ||||
| 21-P20384L003 | IN STOCK SHIP TODAY | 5 | ||||
| 038329NQ6A-10 | IBM | IN STOCK SHIP TODAY | 3 | |||
| CDF-38-70038 | TE Connectivity | IN STOCK SHIP TODAY |
| 1 | ||
![]() EBV Elektronik | XMC1302T038X0064ABXUMA3 | Infineon Technologies AG | ARM MCU 32bit ARM CortexM0 32 MHz 64 KB 16 KB 38 Pins TSSOP (Alt: SP001720076) RoHS : Compliant | 39,000 | ||
| IPD038N06NF2SATMA1 | Infineon Technologies AG | Power MOSFET N Channel 60 V 120 A 385 Milliohms TO252 DPAK 3 Pins Surface Mount (Alt: SP005588983) RoHS : Compliant | 4,000 | |||
| DCP-END030/1-PC800-38 | Luminus Devices | ACDC LED Driver 304 W 38 V 800 mA Constant Current 220 VAC to 240 VAC (Alt: DCP-END030/1-PC800-38) RoHS : Compliant | 1,100 | |||
| B0385 | ArduCam | ALUMINUM ELECTROLYTIC SNAP (Alt: B0385) RoHS : Compliant | 0 | |||
| TSSP6038TT | Vishay Intertechnologies | Infrared Receiver Remote Control 38 kHz Top or Side View Surface Mount 25m 07 mWm (Alt: TSSP6038TT) RoHS : Compliant | 0 | |||
| SGM2038-3.3XUDY4G/TR | SG Micro Corp | (Alt: SGM2038-3.3XUDY4G/TR) RoHS : Compliant | 0 | |||
| CHIP D0383B RS (SAM) | Infineon Technologies AG | Diode Chip (Alt: SP000942622) RoHS : Not Compliant | 0 | |||
| XMC1201T038F0032ABXUMA1 | Infineon Technologies AG | MCU 32Bit XMC1000 ARM Cortex M0 RISC 32KB Flash 33V5V 38Pin TSSOP TR (Alt: SP001337856) RoHS : Compliant | 0 | |||
| XMC1302T038X0064ABXUMA2 | Infineon Technologies AG | MCU 32Bit XMC1000 ARM Cortex M0 RISC 64KB Flash 33V5V 38Pin TSSOP TR (Alt: SP001344810) RoHS : Compliant | 0 | |||
| XMC1302T038X0128ABXUMA1 | Infineon Technologies AG | (Alt: SP001344770) RoHS : Compliant | 0 | |||
| XMC1201T038F0016ABXUMA1 | Infineon Technologies AG | MCU 32Bit XMC1000 ARM Cortex M0 RISC 16KB Flash 33V5V 38Pin TSSOP TR (Alt: SP001337854) RoHS : Compliant | 0 | |||
| XMC1402T038X0128AAXUMA1 | Infineon Technologies AG | MCU 32Bit ARM CortexM0 RISC 128KB Flash 18V to 55V 38Pin TSSOP TR (Alt: SP001598270) RoHS : Compliant | 0 | |||
| XMC1302T038X0064ABXUMA1 | Infineon Technologies AG | (Alt: SP001337864) RoHS : Compliant | 0 | |||
| DIT-END027/1-PC700-38-CW | Luminus Devices | InTrack Current Configurable Flickerfree Driver 27W (Alt: DIT-END027/1-PC700-38-CW) RoHS : Compliant | 0 | |||
| C16038_STRADELLA-8-T2-PC | LEDIL | Single lenssquare1 Pos139mm D712 (Alt: C16038_STRADELLA-8-T2-PC) RoHS : Compliant | 0 | |||
![]() ECCO | 2170389020 | ITT Interconnect Solutions | 1,624 | |||
| 1020384000 | ITT Interconnect Solutions |
| 334 | |||
| 102-0384-000 | ITT Interconnect Solutions |
| 334 | |||
| 102-0383-000 | ITT Interconnect Solutions |
| 333 | |||
| 102-0385-000 | ITT Interconnect Solutions |
| 245 | |||
| 102-0386-000 | ITT Interconnect Solutions |
| 237 | |||
| 1020382000 | ITT Interconnect Solutions |
| 203 | |||
| 102-0382-000 | ITT Interconnect Solutions |
| 203 | |||
| 93-830389-10P | Amphenol Industrial Operations |
| 108 | |||
| 102-0380-000 | ITT Interconnect Solutions |
| 87 | |||
| 19070-0038 | Molex | RoHS : Compliant |
| 25 | ||
| 0190700038 | Molex | RoHS : Compliant |
| 25 | ||
| 103-0382-000 | ITT Interconnect Solutions |
| 9 | |||
| 103-0389-000 | ITT Interconnect Solutions |
| 1 | |||
| 1030389000 | ITT Interconnect Solutions |
| 1 | |||
![]() Pasternack Enterprises US | PE3038LF | Pasternack Enterprises | Key Specifications, Connector Series 1: HN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: HN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: RG213/U, RF Cable Type: RG213, RF Cable Impedance: 50. HN Male to HN Male Cable Using RG213 Coax, RoHS. PE3038LF is a HN male to HN male cable using RG213 coax. This Pasternack HN male to HN male cable assembly uses a 50 Ohm HN for connector 1 and a 50 Ohm HN for connector 2. Our male HN to male HN cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3038LF HN male to HN male cable assembly is constructed with RG213 coax. | 1,224 | ||
| PE3W15038-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Reverse Polarity SMA Plug Right Angle to N Male Cable 48 Inch Length Using RG142 Coax., Radio frequency assembly reverse polarity SMA plug right angle to N male cable 48 inch length using RG142 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The reverse polarity SMA plug right angle to N male cable 48 inch length using RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle reverse polarity SMA cable connection on one end and a type N cable connection on the other. Our right angle reverse polarity SMA to type N cable assembly has a plug gender on end 1 and a male on end 2. PE3W15038-48 can also be known as a right angle reverse polarity SMA male to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W15038-48 RF cable has a FEP jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. Reverse polarity SMA male to type N plug cable assembly PE3W15038-48 is built with RG142 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with right angle SMA to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W15038-48 can also be used in the other direction and will be a type N male to right angle reverse polarity SMA plug cable assembly if the opposite connectivity is required. SMA reverse polarity right angle male to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to type N RF cable assembly as per your requirements. |
| 557 | ||
| PE71S2038 | Pasternack Enterprises | Key Specifications, Connector Series: SMA, Connector Gender: Female, Switch Design: Reflective, Minimum Frequency: 100 MHz, Maximum Frequency: 500 MHz, Impedance: 50 Ohm, Maximum Input Power: 250 Watts, Maximum Input VSWR: 1.25:1, Maximum Insertion Loss: 0.5 dB, Minimum Isolation: 55 dB. SPDT PIN Diode Switch Operating from 100 MHz to 500 MHz Up to 250 Watts (+54 dBm) and SMA. PE71S2038 PIN diode switch from Pasternack is a Reflective design. Our RF Reflective PIN diode switch uses SMA connectors at 50 Ohm. This SMA PIN diode Reflective switch has a minimum frequency of 100 MHz and a maximum frequency of 500 MHz. The Pasternack PIN diode Reflective RF switch is rated at a switching speed of 40,000 ns and a maximum input power of 250 Watts (+54 dBm ). Insertion loss maximum of this SMA Reflective switch is 0.5 dB with an isolation minimum of 55 dB. Reflective PIN diode radio frequency switch PE71S2038 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our Reflective SMA coaxial PIN diode switch can ship worldwide the same day that it is bought as with our other available RF parts. |
| 1 | ||
| PE3M0383-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: M39029, Connector 1 Size: 8, Connector 1 Gender: Pin, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: M39029, Connector 2 Size: 8, Connector 2 Gender: Pin, Connector 2 Specification: MIL-DTL-38999, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086, RF Cable Type: Coax, RF Cable Specification: PE-P086 datasheet, RF Cable Impedance : 50 Ohm. MIL Size 8 Contact Pin to MIL Size 8 Contact Pin Cable 36 Inch Length Using PE-P086 Coax with HeatShrink, LF Solder. The PE3M0383-36 from Pasternack is a D38999 contact cable assembly that is built with a size 8 M39029 pin contact connection on one end and a M39029 pin connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This M39029 to M39029 cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 3 GHz. The PE3M0383-36 RF cable has a FEP jacket of 0.104-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 125 degrees C. Our M39029 pin to M39029 pin cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0383-36 in-series RF cable has 0.5 inches of repeated minimum bend radius along with 110 dB of minimum RF shielding. M39029 pin to M39029 pin cable assembly is built with PE-P086, which is a flexible coax type. The Pasternack PE3M0383-36 flexible cable assembly has a 50 Ohm impedance and is double-shielded. Additional dimensions, specifications, and CAD drawings for this M39029 to M39029 RF cable are available on our downloadable PDF datasheet. M39029 pin to M39029 pin cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of M39029 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal M39029 to M39029 RF cable assembly as per your requirements. |
| 0 | ||
| PE3W03809LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: HN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG8A/U, RF Cable Type: RG8, RF Cable Impedance: 50 Ohm. HN Male to BNC Male Cable Using RG8 Coax with HeatShrink, LF Solder. PE3W03809LF/HS is a HN male to BNC male cable using RG8 coax. This Pasternack HN male to BNC male cable assembly uses a 50 Ohm HN for connector 1 and a 50 Ohm BNC for connector 2. Our male HN to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03809LF/HS HN male to BNC male cable assembly is constructed with RG8 coax. | 0 | |||
| PE3W03832 | Pasternack Enterprises | Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402TN, RF Cable Type: RG402 Tinned, RF Cable Impedance: 50 Ohm. 3.5mm Female to BNC Female Cable Using Tinned RG402 Coax. PE3W03832 is a 3.5mm female to BNC female cable using RG402 Tinned coax. This Pasternack 3.5mm female to BNC female cable assembly uses a 50 Ohm 3.5mm for connector 1 and a 50 Ohm BNC for connector 2. Our female 3.5mm to female BNC cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W03832 3.5mm female to BNC female cable assembly is constructed with RG402 Tinned coax. | 0 | |||
| PE3W03869 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm. SMP Female to SMA Female Bulkhead Cable Using Tinned RG405 Coax., Radio frequency assembly SMP female to SMA female bulkhead cable using tinned RG405 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMP female to SMA female bulkhead cable using tinned RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMP cable connection on one end and SMA bulkhead cable connection on the other. Our SMP to SMA cable assemblies have a female gender on end 1 and female on end 2. This SMP to SMA cable is a female to female coax assembly, PE3W03869, can also be known as a SMP jack to SMA jack cable assembly and will be shipped same-day as it is purchased. SMP jack to SMA jack cable assembly PE3W03869 is built with RG405 tinned which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with SMP to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency SMP female to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W03869 can also be used in the other direction and will be SMA female bulkhead to SMP female cable assembly if the opposite connectivity is required. SMP jack to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMA cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMP female to SMA female bulkhead cable using tinned RG405 coax. | 0 | |||
| PE3W03874LF | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.85mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm. 1.85mm Male to 1.85mm Male Cable Using Tinned RG405 Coax, LF Solder. PE3W03874LF is a 1.85mm male to 1.85mm male cable using RG405 Tinned coax. This Pasternack 1.85mm male to 1.85mm male cable assembly uses a 50 Ohm 1.85mm for connector 1 and a 50 Ohm 1.85mm for connector 2. Our male 1.85mm to male 1.85mm cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W03874LF 1.85mm male to 1.85mm male cable assembly is constructed with RG405 Tinned coax. | 0 | |||
| PE3W05038 | Pasternack Enterprises | Key Specifications, Connector Series 1: Mini SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Mini SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. Mini SMP Female Right Angle to Mini SMP Female Cable Using PE-SR405FL Coax. PE3W05038 is a Mini SMP female right angle to Mini SMP female cable using PE-SR405FL coax. This Pasternack Mini SMP female right angle to Mini SMP female cable assembly uses a 50 Ohm Mini SMP for connector 1 and a 50 Ohm Mini SMP for connector 2. Mini SMP right angle to Mini SMP coaxial cable assembly uses 90 degree right angle coax cable connector. Our female Mini SMP right angle to female Mini SMP cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W05038 Mini SMP female right angle to Mini SMP female cable assembly is constructed with PE-SR405FL coax. | 0 | |||
| PE3W10384 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm. TNC Male to TNC Male Cable Using PE-C100-LSZH Coax. PE3W10384 is a TNC male to TNC male cable using PE-C100-LSZH coax. This Pasternack TNC male to TNC male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our male TNC to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10384 TNC male to TNC male cable assembly is constructed with PE-C100-LSZH coax. | 0 | |||
| PE3W03831 | Pasternack Enterprises | Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. MCX Plug Right Angle to SMA Male Cable Using RG142 Coax. PE3W03831 is a MCX plug right angle to SMA male cable using RG142 coax. This Pasternack MCX plug right angle to SMA male cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm SMA for connector 2. MCX right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MCX right angle to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03831 MCX plug right angle to SMA male cable assembly is constructed with RG142 coax. | 0 | |||
| PE3W03868 | Pasternack Enterprises | Key Specifications, Connector Series 1: UHF, Connector Gender 1: Sexless, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. UHF Sexless to BNC Male Cable Using LMR-195 Coax. PE3W03868 is a UHF sexless to BNC male cable using LMR-195 coax. This Pasternack UHF sexless to BNC male cable assembly uses a 50 Ohm UHF for connector 1 and a 50 Ohm BNC for connector 2. Our sexless UHF to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03868 UHF sexless to BNC male cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W10383 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. BNC Female to TNC Male Cable Using LMR-100 Coax. PE3W10383 is a BNC female to TNC male cable using LMR-100A coax. This Pasternack BNC female to TNC male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm TNC for connector 2. Our female BNC to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10383 BNC female to TNC male cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W19038LF | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.2-5, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. 2.2-5 Female to 4.3-10 Male Cable Using TFT-5G-402 Coax, LF Solder. PE3W19038LF is a 2.2-5 female to 4.3-10 male cable using TFT-5G-402 coax. This Pasternack 2.2-5 female to 4.3-10 male cable assembly uses a 50 Ohm 2.2-5 for connector 1 and a 50 Ohm 4.3-10 for connector 2. Our female 2.2-5 to male 4.3-10 cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W19038LF 2.2-5 female to 4.3-10 male cable assembly is constructed with TFT-5G-402 coax. | 0 | |||
| PE3W20384LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: C, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: HN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm. C Male Right Angle to HN Male Cable Using RG400 Coax with HeatShrink, LF Solder. PE3W20384LF/HS is a C male right angle to HN male cable using RG400 coax. This Pasternack C male right angle to HN male cable assembly uses a 50 Ohm C for connector 1 and a 50 Ohm HN for connector 2. C right angle to HN coaxial cable assembly uses 90 degree right angle coax cable connector. Our male C right angle to male HN cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20384LF/HS C male right angle to HN male cable assembly is constructed with RG400 coax. | 0 | |||
![]() Venkel Ltd. | FBM0603-800P | VENKEL LTD | Multi-Layer Ferrite Bead;0603;80R RoHS : Compliant | 4,000 | ||
| FBC0603-800P | VENKEL LTD | High Current Ferrite Bead;0603;80R RoHS : Compliant | 0 | |||
| PHPI120903-821MU | VENKEL LTD | PH Power Inductor;120903;820uH;�20% RoHS : Not Compliant | 0 | |||
| PHPI120903-8R2MU | VENKEL LTD | PH Power Inductor;120903;8.2uH;�20% RoHS : Not Compliant | 0 | |||
![]() Vyrian | XMC1301T038F0008ABXUMA1 | Infineon Technologies AG | RISC Microcontroller, 32-Bit, FLASH, 32MHz, CMOS, PDSO38 RoHS : Compliant | 13,414 | ||
| XMC1201T038F0200AAXUMA1 | Infineon Technologies AG | RISC Microcontroller, 32-Bit, FLASH, 33.2MHz, CMOS, PDSO38 RoHS : Compliant | 13,033 | |||
| XMC1200T038F0200AAXUMA1 | Infineon Technologies AG | RISC Microcontroller, 32-Bit, FLASH, 33.2MHz, CMOS, PDSO38 RoHS : Compliant | 12,585 | |||
| XMC1201T038F0128AAXUMA1 | Infineon Technologies AG | RISC Microcontroller, 32-Bit, FLASH, 33.2MHz, CMOS, PDSO38 RoHS : Compliant | 11,286 | |||
| XMC1201T038F0016ABXUMA1 | Infineon Technologies AG | RISC Microcontroller, 32-Bit, FLASH, 33.2MHz, CMOS, PDSO38 RoHS : Compliant | 9,578 | |||
| XMC1201T038F0032ABXUMA1 | Infineon Technologies AG | RISC Microcontroller, 32-Bit, FLASH, 33.2MHz, CMOS, PDSO38 RoHS : Compliant | 7,111 | |||
| XMC1301T038F0016ABXUMA1 | Infineon Technologies AG | RISC Microcontroller, 32-Bit, FLASH, 32MHz, CMOS, PDSO38 RoHS : Compliant | 6,737 | |||
| XMC1201T038F0032AAXUMA1 | Infineon Technologies AG | RISC Microcontroller, 32-Bit, FLASH, 33.2MHz, CMOS, PDSO38 RoHS : Compliant | 6,400 | |||
| XMC1201T038F0128ABXUMA1 | Infineon Technologies AG | RISC Microcontroller, 32-Bit, FLASH, 33.2MHz, CMOS, PDSO38 RoHS : Compliant | 5,807 | |||
| XMC1301T038F0064ABXUMA1 | Infineon Technologies AG | RISC Microcontroller, 32-Bit, FLASH, 32MHz, CMOS, PDSO38 RoHS : Compliant | 5,301 | |||
| XMC1301T038X0064ABXUMA2 | Infineon Technologies AG | RISC Microcontroller, 32-Bit, 32MHz RoHS : Compliant | 4,841 | |||
| XMC1201T038F0064AAXUMA1 | Infineon Technologies AG | RISC Microcontroller, 32-Bit, FLASH, 33.2MHz, CMOS, PDSO38 RoHS : Compliant | 3,900 | |||
| XMC1201T038F0200ABXUMA1 | Infineon Technologies AG | RISC Microcontroller, 32-Bit, FLASH, 33.2MHz, CMOS, PDSO38 RoHS : Compliant | 3,654 | |||
| XMC1302-T038X0200AA | Infineon Technologies AG | RISC Microcontroller | 895 | |||
| XLH330038.000000I | Renesas Electronics Corporation | HCMOS Output Clock Oscillator, 38MHz Nom RoHS : Compliant | 342 | |||
![]() Win Source Electronics | 39-00-0038 | Molex | 4.20mm (.165") Pitch Mini-Fit / Contact F Crimp ST Cable Mount 18-24AWG Mini-Fit® Reel Automotive RoHS : Compliant |
| 817,186 | |
| 03900-0038 | Molex |
| 141,670 | |||
| M74VHC1GT125DF2G-L22038 | Innovision Semiconductor | IC BUFFER NON-INVERT 5.5V SC88A |
| 95,890 | ||
| 170382-0003 | Molex | 170382-0003 Molex I/O Connectors ZXP zSFP 20ckt Gold Flash Solder Area datasheet, inventory, & pricing. RoHS : Compliant |
| 89,000 | ||
| SRP1038A-1R5M | Bourns Inc | FIXED IND 1.5UH 16A 4.6 MOHM SMD RoHS : Compliant |
| 78,640 | ||
| DMC2038LVTQ-7 | Diodes Incorporated | MOSFET BVDSS: 8V 24V TSOT26 / COMPLEMENTARY PAIR ENHANCEMENT MODE MOSFET RoHS : Compliant |
| 35,250 | ||
AOZ1038PI![]() | Alpha & Omega Semiconductor | Conv DC-DC 4.5V to 18V Synchronous Step Down Single-Out 0.8V to 18V 6A 8-Pin SOIC EP T/R / IC REG BUCK ADJ 6A SYNC 8SOIC RoHS : Compliant |
| 12,000 | ||
| FPF1038UCX | Fairchild Semiconductor Corporation | IC LOAD MGMT SWITCH ADV 6-WLCSP RoHS : Compliant |
| 11,500 | ||
KA5L0380RYDTU![]() | Fairchild Semiconductor Corporation | IC FPS PWR SWITCH SMPS TO-220F-4 RoHS : Compliant |
| 10,335 | ||
| TPA2038D1YFF | Texas Instruments | 3.2W Mono Class-D Audio Amplifier |
| 6,605 | ||
| HMC8038LP4CETR | Analog Devices Inc | IC RF SWITCH SPDT 6GHZ 16LFCSP / High Isolation, Silicon SPDT, Nonreflective Switch, 0.1 GHz to 6.0 GHz RoHS : Compliant |
| 5,000 | ||
| 2038-15-SM-RPLF | Bourns Inc | GDT 150V 25% 5KA SURFACE MOUNT RoHS : Compliant |
| 5,000 | ||
| AD8038AKSZ | Analog Devices Inc | Op Amp 350MHz 8-Lead MSOP |
| 3,014 | ||
| STDP6038-AC | STMicroelectronics | Triple input LCD controller for WSXGA+ and WUXGA applications RoHS : Compliant |
| 3,000 | ||
| IAM-20381 | TDK Invensense | SENSOR ACCELEROMETER |
| 305 | ||
![]() Wuhan P&S | TSSP77038TT | Vishay Intertechnologies | IR Sensor Module for Reflective Sensor, Light Barrier, and Fast Proximity Applications RoHS : Compliant |
| 6,600 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |