| Electronic Components Datasheet Search |
|
045YB6R-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() DB Roberts | AV-D30-45AC102-50 | Southco | AV-D30-45AC102-50 | 0 | ||
| 12SWS1045 | Essentra Components | SHOULDER WASHER, .195 ID, .498 | 0 | |||
| 1045-125-SS | RAF Electronic Hardware | 0 | ||||
| 0452-SS | RAF Electronic Hardware | 0 | ||||
| 0453-SS-26 | RAF Electronic Hardware | 0 | ||||
| 0010450000VR | Essentra Components | 0 | ||||
| 0020450500VR | Essentra Components | 0 | ||||
| 30403045E | Essentra Components | 0 | ||||
| 3045-C-440-AL-6 | RAF Electronic Hardware | 1/4X1/8 ROUND SWAGE STANDOFF, GOLD IRIDITE | 0 | |||
| 3045-C-440-SS | RAF Electronic Hardware | 0 | ||||
| 304530040050 | Essentra Components | 0 | ||||
| 304545041152 | Essentra Components | 0 | ||||
| 3045B-440BMODL=.237-16 | RAF Electronic Hardware | 0 | ||||
| E3-1015-045 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| E3-1259-045 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
![]() Flip Electronics | SBRB1045T4G | onsemi | Stock, Ship Today RoHS : Compliant |
| 63,067 | |
| CY621472G30-45ZSXAT | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 30,000 | ||
| CY62147GE30-45ZSXIT | Cypress Semiconductor | Stock RoHS : Compliant | 29,000 | |||
| CY62167G30-45ZI | Cypress Semiconductor | Stock | 7,505 | |||
| CY62147GN30-45ZSXIT | Infineon Technologies AG | Stock | 6,000 | |||
| UPD78F0455GK(S)-GAJ-AX | Renesas Electronics Corporation | Stock | 5,042 | |||
| CY62147G30-45ZSXIT | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 5,000 | ||
| CY62167G30-45BVXAT | Infineon Technologies AG | Stock RoHS : Compliant | 4,800 | |||
| CY62146GN30-45BVXIT | Infineon Technologies AG | Stock RoHS : Compliant | 4,701 | |||
CY62167GE30-45ZXIT![]() | Cypress Semiconductor | Stock RoHS : Compliant | 4,284 | |||
| CY62157G30-45ZXI | Infineon Technologies AG | Stock RoHS : Compliant | 4,224 | |||
| R9A08G045S33GBG#AC0 | Renesas Electronics Corporation | Stock RoHS : Compliant | 1,260 | |||
| CY62158GE30-45BVXI | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 1,015 | ||
| CY62157G30-45BVXI | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 899 | ||
| FSB50450S | onsemi | Stock, Ship Today RoHS : Compliant | 408 | |||
![]() Pasternack Enterprises US | PE3W04546LF/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-200-UF, RF Cable Type: LMR-200-UF, RF Cable Impedance: 50 Ohm. SMA Male to BNC Male Low Loss Cable Using LMR-200-UF Coax with Times Microwave Components with HeatShrink, LF Solder., Radio frequency assembly SMA male to BNC male low loss cable using LMR-200-UF coax with Times Microwave components with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to BNC male low loss cable using LMR-200-UF coax with Times Microwave components with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a BNC cable connection on the other. Our low loss SMA to BNC cable assembly has a male gender on end 1 and a male on end 2. PE3W04546LF/HS can also be known as a low loss SMA plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W04546LF/HS RF cable has a TPE jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Our SMA male to BNC male cable has a maximum VSWR of 1.4:1. SMA plug to BNC plug cable assembly PE3W04546LF/HS is built with LMR-200-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W04546LF/HS can also be used in the other direction and will be a BNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA and BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 1,795 | ||
| PE3W04533-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Reverse Polarity SMA Plug to N Male Right Angle Low Loss Cable 36 Inch Length Using LMR-195 Coax., Radio frequency assembly reverse polarity SMA plug to N male right angle low loss cable 36 inch length using LMR-195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Reverse polarity SMA plug to N male right angle low loss cable 36 inch length using LMR-195 coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with reverse polarity SMA cable connection on one end and right angle type N cable connection on the other. Our low loss reverse polarity SMA to right angle type N cable assemblies have a plug gender on end 1 and male on end 2. PE3W04533-36 can also be known as a low loss reverse polarity SMA male to right angle N type plug cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA male to type N plug cable assembly PE3W04533-36 is built with LMR-195 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this reverse polarity SMA plug to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04533-36 can also be used in the other direction and will be right angle type N male to reverse polarity SMA plug cable assembly if the opposite connectivity is required. Low loss SMA reverse polarity male to N type right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA plug to N male right angle low loss cable 36 inch length using LMR-195 coax. |
| 118 | ||
| PE3MSA00452-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: M17/176-00002, RF Cable Type: M17/176-00002, RF Cable Impedance: 78 Ohm, Length, Max: 48 inches. Lead Free 3-Lug TRB Jack to Jack for 78 Ohm M17/176-00002, 48" Cable., Radio frequency assembly lead free 3-Lug TRB jack to jack for 78 Ohm M17/176-00002, 48" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Lead free 3-Lug TRB jack to jack for 78 Ohm M17/176-00002, 48" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a jack gender on end 1 and jack on end 2. PE3MSA00452-48 can also be known as a 1553 TRB female to TRB female cable assembly and will be shipped same-day as it is purchased. TRB female to TRB female cable assembly PE3MSA00452-48 is built with M17/176-00002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 10 GHz maximum frequency TRB jack to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB female to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this lead free 3-Lug TRB jack to jack for 78 Ohm M17/176-00002, 48" cable. |
| 16 | ||
| PE3C10456 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Passivated, RF Cable Part Number: PE-118SR, RF Cable Type: PE-118SR, RF Cable Impedance: 50 Ohm. 2.92mm Female Bulkhead to 2.92mm Female Bulkhead Cable Using PE-118SR Semi-Rigid Coax., Radio frequency assembly 2.92mm female bulkhead to 2.92mm female bulkhead cable using PE-118SR semi-rigid coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm female bulkhead to 2.92mm female bulkhead cable using PE-118SR semi-rigid coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm bulkhead cable connection on one end and a 2.92mm bulkhead cable connection on the other. Our 2.92mm to 2.92mm cable assembly has a female gender on end 1 and a female on end 2. PE3C10456 can also be known as a 2.92mm jack to 2.92mm jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE (LD) dielectric type. The minimum bend radius for this cable is 0.4 inches, allowing for a single bend without damaging the cable. This radio frequency cable assembly can withstand temperatures ranging from -40 to 105 degrees C. The semi-rigid RF cable has an in-series connection. Our bulkhead 2.92mm female to bulkhead 2.92mm female cable has a maximum VSWR of 1.4:1. 2.92mm jack to 2.92mm jack cable assembly PE3C10456 is built with PE-118SR which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to 2.92mm cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method and a stainless steel body with passivated plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. 2.92mm jack bulkhead to 2.92mm jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to 2.92mm RF cable assembly as per your requirements. | 10 | |||
| PE3C10456-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Passivated, RF Cable Part Number: PE-118SR, RF Cable Type: PE-118SR, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 2.92mm Female Bulkhead to 2.92mm Female Bulkhead Cable 12 Inch Length Using PE-118SR Semi-Rigid Coax., Radio frequency assembly 2.92mm female bulkhead to 2.92mm female bulkhead cable 12 inch length using PE-118SR semi-rigid coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm female bulkhead to 2.92mm female bulkhead cable 12 inch length using PE-118SR semi-rigid coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm bulkhead cable connection on one end and a 2.92mm bulkhead cable connection on the other. Our 2.92mm to 2.92mm cable assembly has a female gender on end 1 and a female on end 2. PE3C10456-12 can also be known as a 2.92mm jack to 2.92mm jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE (LD) dielectric type. The minimum bend radius for this cable is 0.4 inches, allowing for a single bend without damaging the cable. This radio frequency cable assembly can withstand temperatures ranging from -40 to 105 degrees C. The semi-rigid RF cable has an in-series connection. Our bulkhead 2.92mm female to bulkhead 2.92mm female cable has a maximum VSWR of 1.4:1. 2.92mm jack to 2.92mm jack cable assembly PE3C10456-12 is built with PE-118SR which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to 2.92mm cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method and a stainless steel body with passivated plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. 2.92mm jack bulkhead to 2.92mm jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to 2.92mm RF cable assembly as per your requirements. |
| 2 | ||
| PE3C0453 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.4mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE3C3045 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: FAKRA, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMA Female to Water Blue FAKRA Jack Low Loss Cable Using LMR-100 Coax., Radio frequency assembly SMA female to water blue FAKRA jack low loss cable using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA female to water blue FAKRA jack low loss cable using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to FAKRA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and FAKRA cable connection on the other. Our low loss SMA to FAKRA cable assemblies have a female gender on end 1 and jack on end 2. PE3C3045 can also be known as a low loss SMA jack to FAKRA female cable assembly and will be shipped same-day as it is purchased. SMA jack to FAKRA female cable assembly PE3C3045 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to FAKRA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMA female to FAKRA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3045 can also be used in the other direction and will be FAKRA jack to SMA female cable assembly if the opposite connectivity is required. Low loss SMA jack to FAKRA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to FAKRA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to water blue FAKRA jack low loss cable using LMR-100 coax. | 0 | |||
| PE3W00457 | Pasternack Enterprises | Key Specifications, Connector Series 1: 10-32, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. 10-32 Male Right Angle to BNC Male Cable Using LMR. PE3W00457 is a 10-32 male right angle to BNC male cable using LMR-100A coax. This Pasternack 10-32 male right angle to BNC male cable assembly uses a 50 Ohm 10-32 for connector 1 and a 50 Ohm BNC for connector 2. 10-32 right angle to BNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 10-32 right angle to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00457 10-32 male right angle to BNC male cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W04553/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Female Bulkhead to SMA Male Right Angle Low Loss Cable 24 Inch Length Using LMR-200 Coax with HeatShrink., Radio frequency assembly N female bulkhead to SMA male right angle low loss cable 24 inch length using LMR-200 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N female bulkhead to SMA male right angle low loss cable 24 inch length using LMR-200 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N bulkhead cable connection on one end and a right angle SMA cable connection on the other. Our low loss type N to right angle SMA cable assembly has a female gender on end 1 and a male on end 2. PE3W04553/HS-24 can also be known as a low loss type N jack to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W04553/HS-24 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Our bulkhead type N female to right angle SMA male cable has a maximum VSWR of 1.4:1. Type N jack to SMA plug cable assembly PE3W04553/HS-24 is built with LMR-200 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W04553/HS-24 can also be used in the other direction and will be a right angle SMA male to type N female bulkhead cable assembly if the opposite connectivity is required. Low loss type N jack bulkhead to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W04561 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. TNC Male to N Female Cable Using LMR-400-UF Coax. PE3W04561 is a TNC male to N female cable using LMR-400-UF coax. This Pasternack TNC male to N female cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm N for connector 2. Our male TNC to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04561 TNC male to N female cable assembly is constructed with LMR-400-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W04596/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SSMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SSMC Plug Right Angle to BNC Male Cable Using LMR-100 Coax with HeatShrink. PE3W04596/HS is a SSMC plug right angle to BNC male cable using LMR-100A coax. This Pasternack SSMC plug right angle to BNC male cable assembly uses a 50 Ohm SSMC for connector 1 and a 50 Ohm BNC for connector 2. SSMC right angle to BNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug SSMC right angle to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04596/HS SSMC plug right angle to BNC male cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W04598 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE3W05045LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. SMB Jack to MMCX Plug Right Angle Cable Using RG174 Coax with HeatShrink, LF Solder, RoHS. PE3W05045LF/HS is a SMB jack to MMCX plug right angle cable using RG174 coax. This Pasternack SMB jack to MMCX plug right angle cable assembly uses a 50 Ohm SMB for connector 1 and a 50 Ohm MMCX for connector 2. SMB to MMCX right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our jack SMB to plug MMCX right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W05045LF/HS SMB jack to MMCX plug right angle cable assembly is constructed with RG174 coax. | 0 | |||
| PE3W00456 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 10-32, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMA Male to 10-32 Male Right Angle Cable Using LMR. PE3W00456 is a SMA male to 10-32 male right angle cable using LMR-100A coax. This Pasternack SMA male to 10-32 male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm 10-32 for connector 2. SMA to 10-32 right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA to male 10-32 right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00456 SMA male to 10-32 male right angle cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W04560 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG8A/U, RF Cable Type: RG8, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Male Right Angle to Reverse Polarity TNC Female Cable Using RG8 Coax. PE3W04560 is a reverse polarity TNC male right angle to reverse polarity TNC female cable using RG8 coax. This Pasternack reverse polarity TNC male right angle to reverse polarity TNC female cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. TNC right angle to TNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our reverse polarity male TNC right angle to reverse polarity female TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04560 TNC reverse polarity male right angle to TNC reverse polarity female cable assembly is constructed with RG8 coax. | 0 | |||
![]() Venkel Ltd. | SMPI606045-101MU | VENKEL LTD | Square Miniature Power Inductor;606045;100uH;�20% RoHS : Compliant | 0 | ||
| SMPI606045-560NU | VENKEL LTD | Square Miniature Power Inductor;606045;56uH;�30% RoHS : Compliant | 0 | |||
| CRN10-4-5R1JT | VENKEL LTD | Chip Resistor Array;CRN10;4;5.1R;�5%;Convex RoHS : Compliant | 0 | |||
| TA4R0PCJ157MYR0045 | VENKEL LTD | Polymer Tantalum Capacitor J-Lead;4V;PCJ;150uF;�20%;Y;45mR RoHS : Compliant | 0 | |||
| SMPI606045-220NU | VENKEL LTD | Square Miniature Power Inductor;606045;22uH;�30% RoHS : Compliant | 0 | |||
| SMPI606045-4R7MU | VENKEL LTD | Square Miniature Power Inductor;606045;4.7uH;�20% RoHS : Compliant | 0 | |||
| CRN10-4-5102FT | VENKEL LTD | Chip Resistor Array;CRN10;4;51K;�1%;Convex RoHS : Compliant | 0 | |||
| CRN10-4-561JT | VENKEL LTD | Chip Resistor Array;CRN10;4;560R;�5%;Convex RoHS : Compliant | 0 | |||
| SMPI606045-2R2MU | VENKEL LTD | Square Miniature Power Inductor;606045;2.2uH;�20% RoHS : Compliant | 0 | |||
| SMPI606045-6R8MU | VENKEL LTD | Square Miniature Power Inductor;606045;6.8uH;�20% RoHS : Compliant | 0 | |||
| TA035TCR156KCR0450 | VENKEL LTD | Tantalum Chip Capacitor;35V;TCR;15uF;10%;C;450mohm RoHS : Compliant | 0 | |||
| TA4R0TCR687MDR0045 | VENKEL LTD | Tantalum Chip Capacitor;4V;TCR;680uF;20%;D;45mohm RoHS : Compliant | 0 | |||
| TA020TCR156MCR0450 | VENKEL LTD | Tantalum Chip Capacitor;20V;TCR;15uF;20%;C;450mohm RoHS : Compliant | 0 | |||
| TA6R3TCR477KDR0045 | VENKEL LTD | Tantalum Chip Capacitor;6.3V;TCR;470uF;10%;D;45mohm RoHS : Compliant | 0 | |||
| TA6R3TCR477KER0045 | VENKEL LTD | Tantalum Chip Capacitor;6.3V;TCR;470uF;10%;E;45mohm RoHS : Compliant | 0 | |||
![]() Vyrian | Y0104500K000S0L | Vishay Precision Group Inc | Fixed Resistor, Metal Foil, 0.5W, 500000ohm, 500V, 0.001% +/-Tol, 2ppm/Cel, Through Hole Mount | 17,036 | ||
| ZXTC2045E6QTA | Diodes Incorporated | Small Signal Bipolar Transistor, 1.5A I(C), 30V V(BR)CEO, 2-Element, NPN and PNP, Silicon | 15,653 | |||
UPD78F0451GA-HAB-AX![]() | Renesas Electronics Corporation | Microcontroller, 8-Bit, FLASH, 78K0 CPU, 10MHz, CMOS, PQFP64 RoHS : Compliant | 13,007 | |||
UPD78F0451GB-GAH-AX![]() | Renesas Electronics Corporation | Microcontroller, 8-Bit, FLASH, UPD78K0 CPU, 10MHz, CMOS, PQFP64 RoHS : Compliant | 12,482 | |||
UJA1023T/2R04,512![]() | NXP Semiconductors | Automotive Analog Circuit, PDSO16 RoHS : Compliant | 6,579 | |||
| Z156F045FNR | Texas Instruments | 6,482 | ||||
| XF3E-9045-31AE | OMRON Corporation | FFC/FPC Connector, 90 Contact(s), 1 Row(s), Female, Right Angle, 0.012 inch Pitch, Surface Mount Terminal, Locking, Natural Insulator RoHS : Compliant | 5,199 | |||
UJA1023T/2R04,518![]() | NXP Semiconductors | Automotive Analog Circuit, PDSO16 RoHS : Compliant | 4,917 | |||
| XQ7Z045-1RF900I | AMD Xilinx | Microprocessor Circuit, CMOS, PBGA900 RoHS : Not Compliant | 4,187 | |||
| XQ7Z045-1RF900Q | AMD Xilinx | Microprocessor Circuit, CMOS, PBGA900 RoHS : Not Compliant | 4,130 | |||
| XQ7Z045-2RF900I | AMD Xilinx | Microprocessor Circuit, CMOS, PBGA900 RoHS : Not Compliant | 3,485 | |||
| XQ7Z045-2RF676I | AMD Xilinx | Microprocessor Circuit, CMOS, PBGA676 RoHS : Not Compliant | 2,945 | |||
| XQ7Z045-1RF676I | AMD Xilinx | Microprocessor Circuit, CMOS, PBGA676 RoHS : Not Compliant | 2,722 | |||
| XQ7Z045-1RFG676Q | AMD Xilinx | Microprocessor Circuit, CMOS, PBGA676 RoHS : Compliant | 1,594 | |||
| XQ7Z045-1RF676Q | AMD Xilinx | Microprocessor Circuit, CMOS, PBGA676 RoHS : Not Compliant | 1,261 | |||
![]() Waytek, Inc. | 12045773 | Aptiv PLC | Metri-Pack 150 Series Male 18-16GA #12045773 Term on Reel 3000/Reel RoHS : Compliant |
| 114,000 | |
| 55811704/55811744 | Southwire Company LLC | 18/3 SJOOW Service Cord Black White Green Conductors -40C to 90C UL/CSA 300V |
| 54,500 | ||
| 12045773-L | Aptiv PLC | Metri-Pack 150 Series Male 18-16GA 12045773 L TERMINAL LOOSE PIECE |
| 51,015 | ||
| 19130-0045 | Molex | 16-14 GA #8 Spade Terminal Blue Vinyl Insulated |
| 32,318 | ||
| 149045-91W | General Cable Technologies Corporation | 12GA SXL White Cross-Link Automotive Wire XLPE -51C to 125C |
| 8,000 | ||
| 12045699 | Aptiv PLC | Aptiv 12045699 is a black 3-contact TPA secondary lock clip for Metri-Pack 630 Series connectors. It provides terminal position assurance for three circuits, helping hold the terminals firmly in the connector body and supporting strain relief in sealed assemblies. |
| 7,554 | ||
| 12045808 | Aptiv PLC | Aptiv 12045808 is a black 10-way male connector in the Metri-Pack 150 Series, rated for up to 14A. The compact housing accepts matching 150 Series terminals and uses cable seals and cavity plugs to support protected in-line electrical connections. RoHS : Compliant |
| 5,332 | ||
| 192210453 | Molex | 4GA Copper Eyelet 1/2" Stud |
| 2,043 | ||
| 15429045 | Aptiv PLC | Aptiv 15429045 is a 2-way GT 150 Series connector with an integrated 121 ohm terminating resistor for J1939 CAN bus circuits. The sealed plug housing combines compact GT 150 packaging with a fixed network termination for vehicle communication systems. |
| 1,816 | ||
| 192210454 | Molex | 4GA Tinned Eyelet 1/2" Stud |
| 231 | ||
| DP-34045-2-000 | Data Panel Incorporated | ExtremeDB, 10 Post CAN Splitter |
| 99 | ||
| 5045 | Blue Sea Systems | ST Blade Compact Fuse Block 4 Circuits for ATO/ATC fuse **RETAIL** |
| 35 | ||
| 1045 | Blue Sea Systems | Fast Charge - Dual USB Charger **RETAIL** Socket Mount **RETAIL** |
| 8 | ||
| 19154-0045 | Molex | 6 GA Butt Connector Insulated Blue Vinyl RoHS : Compliant |
| 0 | ||
| 3004-557-000U | QuickCable Corporation | 4 GA Crimpable Battery Lug Universal, Straight |
| 0 | ||
![]() Win Source Electronics | 0451.750MRL | Littelfuse Inc | FUSE BOARD MNT 750MA 125VAC/VDC RoHS : Compliant |
| 191,099 | |
| NR6045T100M | TAIYO YUDEN | Inductor Power Shielded Wirewound 10uH 20% 100KHz Ferrite 2.5A 0.0611Ohm DCR 2424 T/R / FIXED IND 10UH 2.5A 61.1 MOHM RoHS : Compliant |
| 86,000 | ||
| HCPL-0452-500E | Broadcom Limited | OPTOISOLATOR 3.75KV TRANS 8-SO RoHS : Compliant |
| 37,961 | ||
| STPS1045B-TR | STMicroelectronics | DIODE SCHOTTKY 45V 10A DPAK RoHS : Compliant |
| 36,000 | ||
| 0451002.MRL | Littelfuse Inc | FUSE BOARD MNT 2A 125VAC/VDC SMD RoHS : Compliant |
| 30,000 | ||
| 0451.500MRL | Littelfuse Inc | FUSE BOARD MNT 500MA 125VAC/VDC RoHS : Compliant |
| 27,000 | ||
| BTS50452EKAXUMA1 | Infineon Technologies AG | IC PWR SWITCH N-CHAN 1:1 DSO-14 / Power Switch/Driver 1:1 N-Channel 3A PG-DSO-14-40-EP RoHS : Compliant |
| 25,500 | ||
| AQ3045-01ETG | Littelfuse Inc | TVS DIODE 12VC 3A SOD882 / ESD Suppressor TVS Bi-Dir 5.3V Automotive 2-Pin SOD-882 T/R RoHS : Compliant |
| 23,900 | ||
| 43045-1000 | Molex | MICROFIT 3.0 RA HDR W/TH DR TIN RoHS : Compliant |
| 19,383 | ||
| LT3045IDD | Analog Devices Inc | Low Noise, 20V, 500mA Linear Regulator |
| 15,000 | ||
| 51110-0456 | Molex | Conn Housing RCP 4 POS 2mm Crimp ST Cable Mount RoHS : Compliant |
| 14,491 | ||
ADR5045BRTZ-REEL7![]() | Analog Devices Inc | IC VREF SHUNT 5V SOT23-3 RoHS : Compliant |
| 13,950 | ||
| LT3045IDD#PBF | Analog Devices Inc | IC REG LINEAR 0V 500MA 10DFN RoHS : Compliant |
| 13,530 | ||
| 0451.160MRL | Littelfuse Inc | FUSE BOARD MNT 160MA 125VAC/VDC / Fuse Chip Very Fast Acting 0.16A 125V SMD Solder Pad 2410 Ceramic T/R CSA/PSE/UL RoHS : Compliant |
| 8,000 | ||
| XC7Z045-1FFG676I | AMD | IC SOC CORTEX-A9 667MHZ 676FCBGA / Dual ARM® Cortex®-A9 MPCore™ with CoreSight™ System On Chip (SOC) IC series Kintex™-7 FPGA, 350K Logic Cells 667MHz 676-FCBGA (27x27) RoHS : Compliant |
| 700 | ||
![]() Wuhan P&S | VS-12CTQ045-M3 | Vishay Intertechnologies | High Performance Schottky Rectifier, 45 V 6A RoHS : Compliant |
| 4,000 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |