 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
047RMS Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 DB Roberts | MS20470-AD6-5 | Military Specifications |
| 1,585 | ||
| 17W04719 | Essentra Components | FLAT WASHER, .209 ID, .492 OD, | 0 | |||
| 3047-C-440-B-12 | RAF Electronic Hardware | 0 | ||||
| H3-50-472-050 | Southco | The swinghandle nests into the housing for minimal protrusion and pops up to swing smoothly for easy latch actuation. Robust die-cast zinc construction provides durable corrosion-resistant performance with optional gasketing for indoor or outdoor use. | 0 | |||
| H3-60-477-050 | Southco | The swinghandle nests into the housing for minimal protrusion and pops up to swing smoothly for easy latch actuation. Robust die-cast zinc construction provides durable corrosion-resistant performance with optional gasketing for indoor or outdoor use. | 0 | |||
| 3047-D-256-B-16 | RAF Electronic Hardware | 1/4 ROUND SWAGE STANDOFFS | 0 | |||
| 3047-D-440-B-37 | RAF Electronic Hardware | 0 | ||||
| 10473F-P | Heyco | HSP-MDL-2-18M V-0 NATURAL 10PK | 0 | |||
| 07003-00477 | Avdel | GEN TL - LIP SEAL | 0 | |||
| 0170470000VR | Essentra Components | 0 | ||||
| 33047 | Pop Rivets | PSZRON-0630-4K | 0 | |||
| 3047-A-440-SS-20 | RAF Electronic Hardware | 0 | ||||
| 3047-B-632-A | RAF Electronic Hardware | 0 | ||||
| 22AWCF250047 | Essentra Components | 0 | ||||
| 22MP35047W | Essentra Components | SNAP BUSHING, 3.500 HOLE, 2.94 | 0 | |||
 ECCO | 351-1047-000 | ITT Interconnect Solutions |
| 119 | ||
| 3511047000 | ITT Interconnect Solutions |
| 119 | |||
| 103-1047-000 | ITT Interconnect Solutions |
| 26 | |||
| 1031047000 | ITT Interconnect Solutions |
| 26 | |||
0190170047 | Molex | RoHS : Compliant |
| 25 | ||
| 19017-0047 | Molex | RoHS : Compliant |
| 25 | ||
 Flip Electronics | X3G-OH047,005 | NXP Semiconductors | Stock RoHS : Compliant | 13,000 | ||
HD64F7047FW40V | Renesas Electronics Corporation | Stock RoHS : Compliant | 10,577 | |||
| R5F12047MSP#10 | Renesas Electronics Corporation | Stock RoHS : Compliant | 3,920 | |||
| DAP047T/2J | NXP Semiconductors | Stock | 2,500 | |||
| R9A09G047E57GBG#AC1 | Renesas Electronics Corporation | Stock | 1,312 | |||
| R7S921047VCBG#AC0 | Renesas Electronics Corporation | Stock RoHS : Compliant | 1,193 | |||
C8051F047-GQR | Silicon Laboratories Inc | Stock, Ship Today RoHS : Compliant |
| 1,000 | ||
| S99-50471 | Infineon Technologies AG | Stock | 910 | |||
| FDH047AN08A0 | onsemi | Stock, Ship Today RoHS : Compliant | 781 | |||
| FDP047N10 | onsemi | Stock, Ship Today RoHS : Compliant |
| 170 | ||
 Maritex | 510470300 | Molex | Rectangular Connector Housings; 510470300; MOLEX; 1; 3; 3; Yes RoHS : Compliant |
| 44,231 | |
| RCA1047RJLF | Hong Kong Resistors Manufactory | Surface Mount Resistors; RCA1047RJLF; HKR |
| 40,000 | ||
| TC1047AVNBTR | Microchip Technology Inc | Temperature Sensors; TC1047AVNBTR; MICROCHIP TECHNOLOGY; 3; 1.016 mm; 3.0226 mm; SOT-23 RoHS : Compliant |
| 23,496 | ||
| B82790C0474N215 | TDK Corporation | Common Mode Filters; B82790C0474N215; TDK; 170 m?; 4.9 mm; 7.1 mm; 6 mm RoHS : Compliant |
| 12,159 | ||
| 0603WAJ0473T5E | Royal Electronic Factory (Thailand) Co Ltd | Chip Resistor; SMD; 0603; 47KOhm; 5%; 1/10W RoHS : Compliant |
| 10,000 | ||
| CFR0S4J0472A50 | Royal Electronic Factory (Thailand) Co Ltd | Miniature resistor RM; 4.7 kOhm; 5%; 1/4W; 1.85x3.5mm RoHS : Compliant |
| 9,895 | ||
| 530470210 | Molex | Male Pin Headers; 530470210; MOLEX; 1; Right Angle, Vertical; Tin; 2 RoHS : Compliant |
| 3,160 | ||
CD4047BM96 | Texas Instruments | Crystal Units (Xtal); CD4047BM96; TEXAS INSTRUMENTS; 0 m; Surface Mount RoHS : Compliant |
| 2,603 | ||
| B32529C0472J289 | TDK Corporation | Film Capacitors; B32529C0472J289; TDK RoHS : Compliant |
| 2,084 | ||
| PT10LV10-473A-2020 / 47K ROHS | Amphenol Piher | Semi-fix potentiometer vertical regulation; 47K |
| 1,139 | ||
| PT10LV10-471 2020 / 470R ROHS | Amphenol Piher | Semi-fix potentiometer vertical regulation; 470R |
| 299 | ||
| RNP18-LPM140-470M | RDA Microelectronics | inductor: wire;SMD; 47uH; 10.2x11.0x4.0mm; 20% |
| 250 | ||
| 513380474 | Molex | Board Stacking Connectors; 513380474; MOLEX; Tape & Reel; 40; 2; Surface Mount RoHS : Compliant |
| 240 | ||
| FXL0630-470-M | Changjiang Electronics Tech (CJ) | Inductor; SMD; 47uH; 2A; 0.385R; 6.6x7x4.8mm; 20% |
| 170 | ||
| 505567-0471 | Molex | Male Pin Headers; 505567-0471; MOLEX; 1; 4 |
| 137 | ||
 Pasternack Enterprises US | PE-047SR | Pasternack Enterprises | Key Specifications, Generic Name: 047 Semi-rigid, Flex Type: Semi-Rigid, Impedance: 50 Ohm, Dielectric Type: PTFE, No. of Shields: 1, Attenuation at 1 Ghz.: 40 dB, Power, Max at 1 Ghz.: 32 Watts, Frequency, Max: 40 GHz, Max Operating Temperature: 100 deg C, Center Conductor Type: Solid, Inner Conductor, Number of Strands: 1, Minimum Bend Radius, Repeated: 0.05 in, Coax Type: Coax. Semirigid Coax Cable 0.047 Diameter With Copper Outer Conductor. PE-047SR part number from Pasternack is a 047 Semi-rigid coax cable that is semi-rigid. Pasternack PE-047SR semi-rigid coax cable is 50 Ohm and has a PTFE dielectric.PE-047SR coax has a shield count of 1 and the maximum frequency for this Pasternack cable is 40 GHz. PE-047SR coax cable has an attenuation at 1 GHz of 40 dB and a maximum power of 32 watts at 1 GHz. Pasternack 047 Semi-rigid coax cables are part of over 40,000 RF, microwave and millimeter wave components. PE-047SR cables and our other RF parts are available for same day shipping worldwide. Custom RF cable assemblies using PE-047SR or other coax can be built and shipped same day as well. |
| 711 | |
| PE3W09204-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SHV, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SHV, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG8A/U, RF Cable Type: RG8, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. SHV Jack Bulkhead to SHV Plug Cable 72 Inch Length Using RG8 Coax., Radio frequency assembly SHV jack bulkhead to SHV plug cable 72 inch length using RG8 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SHV jack bulkhead to SHV plug cable 72 inch length using RG8 coax, SHV cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SHV to SHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SHV bulkhead cable connection on one end and SHV cable connection on the other. Our SHV to SHV cable assemblies have a jack gender on end 1 and plug on end 2. PE3W09204-72 can also be known as a SHV female to SHV male cable assembly and will be shipped same-day as it is purchased. SHV female to SHV male cable assembly PE3W09204-72 is built with RG8 which is a flexible coax type. The Pasternack flexible SHV cable assembly is manufactured with SHV to SHV cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SHV jack bulkhead to SHV plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W09204-72 can also be used in the other direction and will be SHV plug to SHV jack bulkhead cable assembly if the opposite connectivity is required. SHV female bulkhead to SHV male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SHV to SHV cable assembly for quick shipment worldwide. Variations of SHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SHV jack bulkhead to SHV plug cable 72 inch length using RG8 coax. |
| 73 | ||
| PE7047-2 | Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 12.4 GHz, Impedance: 50 Ohm, Power Maximum: 2 Watt, VSWR Maximum: 1.25:1, Attenuation: 2 dB, Connector Series 1: N, Connector Gender 1: Male, Connector Series 2: N, Connector Gender 2: Female, Body Material: Passivated Stainless Steel. 2 dB Fixed Attenuator, N Male to N Female Passivated Stainless Steel Body Rated to 2 Watts Up to 12.4 GHz. PE7047-2 is a fixed 2 dB attenuator from Pasternack. This 2dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a male gender on side 1 and a type N female connector on side 2. The Pasternack PE7047-2 2 dB attenuator is rated for up to 12.4 GHz. Our microwave attenuator is rated to 2 Watts at the stated attenuation value. Our fixed RF attenuator PE7047-2 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 2dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 12 | ||
| PE3M0047-72 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/84-RG223-0XDS2, RF Cable Type: M17/84-RG223, RF Cable Impedance: 50 Ohm, Length: 72 inches. MIL-DTL-17 N Female to TNC Male Cable 72 Inch Length Using M17/84-RG223 Coax., Radio frequency assembly MIL-DTL-17 N female to TNC male cable 72 inch length using M17/84-RG223 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 N female to TNC male cable 72 inch length using M17/84-RG223 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/02-0503 type N to M39012/26-0011 TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/02-0503 type N cable connection on one end and M39012/26-0011 TNC cable connection on the other. Our M39012/02-0503 N type to M39012/26-0011 TNC cable assemblies have a female gender on end 1 and male on end 2. This M39012/02-0503 N type to M39012/26-0011 TNC cable is a female to male coax assembly, PE3M0047-72, can also be known as a MIL-DTL-17/MIL-C-17 M39012/02-0503 type N jack to M39012/26-0011 TNC plug cable assembly and will be shipped same-day as it is purchased. M39012/02-0503 type N jack to M39012/26-0011 TNC plug cable assembly PE3M0047-72 is built with M17/84-RG223 which is a flexible coax type. The Pasternack flexible M39012/02-0503 N cable assembly is manufactured with M39012/02-0503 type N to M39012/26-0011 TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MIL-C-17 11 GHz maximum frequency M39012/02-0503 N type female to M39012/26-0011 TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0047-72 can also be used in the other direction and will be M39012/26-0011 TNC male to M39012/02-0503 type N female cable assembly if the opposite connectivity is required. M39012/02-0503 type N jack to M39012/26-0011 TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/02-0503 N type to M39012/26-0011 TNC cable assembly for quick shipment worldwide. Variations of M39012/02-0503 type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 N female to TNC male cable 72 inch length using M17/84-RG223 coax. |
| 8 | ||
| PE3MSA00477-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 48 inches. Lead Free 78 Ohm Bend Relief 3-Slot TRB Solder/Clamp Plug to Bend Relief 3-Lug TRB Solder/Clamp Jack for PE-30-02003 Twinax 48" Cable., Radio frequency assembly lead free 78 Ohm bend relief 3-Slot TRB solder/clamp plug to bend relief 3-Lug TRB solder/clamp jack for PE-30-02003 twinax 48" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Lead free 78 Ohm bend relief 3-Slot TRB solder/clamp plug to bend relief 3-Lug TRB solder/clamp jack for PE-30-02003 twinax 48" cable, TRB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a plug gender on end 1 and jack on end 2. PE3MSA00477-48 can also be known as a 1553 TRB male to TRB female cable assembly and will be shipped same-day as it is purchased. TRB male to TRB female cable assembly PE3MSA00477-48 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB plug to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MSA00477-48 can also be used in the other direction and will be TRB jack to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this lead free 78 Ohm bend relief 3-Slot TRB solder/clamp plug to bend relief 3-Lug TRB solder/clamp jack for PE-30-02003 twinax 48" cable. |
| 5 | ||
| PE3W00474/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. SMP Female to SMA Female Bulkhead Cable Using PE-SR405FL Coax with HeatShrink., Radio frequency assembly SMP female to SMA female bulkhead cable using PE-SR405FL coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMA female bulkhead cable using PE-SR405FL coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMP cable connection on one end and a SMA bulkhead cable connection on the other. Our SMP to SMA cable assembly has a female gender on end 1 and a female on end 2. PE3W00474/HS can also be known as a SMP jack to SMA jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.78-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. Our SMP female to bulkhead SMA female cable has a maximum VSWR of 1.4:1. SMP jack to SMA jack cable assembly PE3W00474/HS is built with PE-SR405FL which is a formable coax type. The Pasternack formable SMP cable assembly is manufactured with SMP to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W00474/HS can also be used in the other direction and will be a SMA female bulkhead to SMP female cable assembly if the opposite connectivity is required. SMP jack to SMA jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SMA cable assembly for quick shipment worldwide. Variations of SMP and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SMA RF cable assembly as per your requirements. | 0 | |||
| PE3W00474LF-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Female Bulkhead to SMP Female Cable 12 Inch Length Using PE-SR405FL Coax, LF Solder., Radio frequency assembly SMA female bulkhead to SMP female cable 12 inch length using PE-SR405FL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female bulkhead to SMP female cable 12 inch length using PE-SR405FL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and SMP cable connection on the other. Our SMA to SMP cable assemblies have a female gender on end 1 and female on end 2. This SMA to SMP cable is a female to female coax assembly, PE3W00474LF-12, can also be known as a SMA jack to SMP jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMP jack cable assembly PE3W00474LF-12 is built with PE-SR405FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA female bulkhead to SMP female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W00474LF-12 can also be used in the other direction and will be SMP female to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female bulkhead to SMP female cable 12 inch length using PE-SR405FL coax, LF solder. |
| 0 | ||
| PE3W04720 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG8X, RF Cable Type: RG8X, RF Cable Impedance: 50 Ohm. SMA Male to TNC Male Right Angle Cable Using RG8X Coax. PE3W04720 is a SMA male to TNC male right angle cable using RG8X coax. This Pasternack SMA male to TNC male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. SMA to TNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA to male TNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04720 SMA male to TNC male right angle cable assembly is constructed with RG8X coax. | 0 | |||
| PE3W04721/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to TNC Male Right Angle Low Loss Cable 24 Inch Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly SMA male to TNC male right angle low loss cable 24 inch length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC male right angle low loss cable 24 inch length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and right angle TNC cable connection on the other. Our low loss SMA to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W04721/HS-24 can also be known as a low loss SMA plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC plug cable assembly PE3W04721/HS-24 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency SMA male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04721/HS-24 can also be used in the other direction and will be right angle TNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to TNC male right angle low loss cable 24 inch length using LMR-100 coax with heatshrink. |
| 0 | ||
| PE3W04726 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-DB, RF Cable Type: LMR-400-DB, RF Cable Impedance: 50 Ohm. TNC Male to Reverse Polarity TNC Female Cable Using LMR-400-DB Coax. PE3W04726 is a TNC male to reverse polarity TNC female cable using LMR-400-DB coax. This Pasternack TNC male to reverse polarity TNC female cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our male TNC to reverse polarity female TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04726 TNC male to TNC reverse polarity female cable assembly is constructed with LMR-400-DB coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W08047 | Pasternack Enterprises | Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 3.5mm, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402AL, RF Cable Type: PE-SR402AL, RF Cable Impedance: 50 Ohm. 3.5mm Female to 3.5mm Female Bulkhead Cable Using PE-SR402AL Coax. PE3W08047 is a 3.5mm female to 3.5mm female bulkhead cable using PE-SR402AL coax. This Pasternack 3.5mm female to 3.5mm female bulkhead cable assembly uses a 50 Ohm 3.5mm for connector 1 and a 50 Ohm 3.5mm for connector 2. Our female 3.5mm to female 3.5mm bulkhead cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W08047 3.5mm female to 3.5mm female bulkhead cable assembly is constructed with PE-SR402AL coax. | 0 | |||
| PE3W11047-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SSMB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BMA, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SSMB Jack Bulkhead to Slide-On BMA Plug Bulkhead Cable 12 Inch Length Using RG316-DS Coax., Radio frequency assembly SSMB jack bulkhead to slide-on BMA plug bulkhead cable 12 inch length using RG316-DS coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SSMB jack bulkhead to slide-on BMA plug bulkhead cable 12 inch length using RG316-DS coax, SSMB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SSMB to BMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SSMB bulkhead cable connection on one end and BMA bulkhead cable connection on the other. Our SSMB to BMA cable assemblies have a jack gender on end 1 and plug on end 2. PE3W11047-12 can also be known as a SSMB female to BMA male cable assembly and will be shipped same-day as it is purchased. SSMB female to BMA male cable assembly PE3W11047-12 is built with RG316-DS which is a flexible coax type. The Pasternack flexible SSMB cable assembly is manufactured with SSMB to BMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SSMB jack bulkhead to BMA plug bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W11047-12 can also be used in the other direction and will be BMA plug bulkhead to SSMB jack bulkhead cable assembly if the opposite connectivity is required. SSMB female bulkhead to BMA male bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SSMB to BMA cable assembly for quick shipment worldwide. Variations of SSMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SSMB jack bulkhead to slide-on BMA plug bulkhead cable 12 inch length using RG316-DS coax. |
| 0 | ||
| PE3W20470/HS/PH90 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Mini SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm. 2.92mm Male Right Angle to Mini SMP Female Right Angle Cable Using PE-P047 Coax with HeatShrink and 90 Deg. Clock. PE3W20470/HS/PH90 is a 2.92mm male right angle to Mini SMP female right angle cable using PE-P047 coax. This Pasternack 2.92mm male right angle to Mini SMP female right angle cable assembly uses a 50 Ohm 2.92mm for connector 1 and a 50 Ohm Mini SMP for connector 2. 2.92mm right angle to Mini SMP right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 2.92mm right angle to female Mini SMP right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20470/HS/PH90 2.92mm male right angle to Mini SMP female right angle cable assembly is constructed with PE-P047 coax. | 0 | |||
| PE3W20476 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.2-5, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PECX007, RF Cable Type: 141LL SR, RF Cable Impedance: 50 Ohm. 2.2-5 Male to Push-On 4.3-10 Male Cable Using 141 Coax. PE3W20476 is a 2.2-5 male to 4.3-10 male cable using 141LL SR coax. This Pasternack 2.2-5 male to 4.3-10 male cable assembly uses a 50 Ohm 2.2-5 for connector 1 and a 50 Ohm 4.3-10 for connector 2. Our male 2.2-5 to male 4.3-10 cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W20476 2.2-5 male to 4.3-10 male cable assembly is constructed with 141LL SR coax. | 0 | |||
| PE3W24047/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 3.5mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. TNC Male to 3.5mm Male Cable Using PE-P086HF Coax with HeatShrink. PE3W24047/HS is a TNC male to 3.5mm male cable using PE-P086HF coax. This Pasternack TNC male to 3.5mm male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm 3.5mm for connector 2. Our male TNC to male 3.5mm cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W24047/HS TNC male to 3.5mm male cable assembly is constructed with PE-P086HF coax. | 0 | |||
 Venkel Ltd. | C1210X7R100-475KNE | VENKEL LTD | Chip Capacitor;1210;X7R;10V;4.7uF;�10% RoHS : Compliant | 377,702 | ||
C0402X7R500-471KNE | VENKEL LTD | Chip Capacitor;0402;X7R;50V;470pF;�10% RoHS : Compliant | 76,000 | |||
C0603X7R160-471MNP | VENKEL LTD | Chip Capacitor;0603;X7R;16V;470pF;�20% RoHS : Compliant | 5,332 | |||
| C0201C0G250-470GNP | VENKEL LTD | Chip Capacitor;0201;C0G;25V;47pF;�2% RoHS : Compliant | 0 | |||
| C0402X7R160-472KNP | VENKEL LTD | Chip Capacitor;0402;X7R;16V;4700pF;�10% RoHS : Compliant | 0 | |||
| C0603HQN500-470JNP | VENKEL LTD | High-Q NP0 Chip Capacitor;0603;HQN;50V;47pF;�5% RoHS : Compliant | 0 | |||
C0805C0G500-472FNE | VENKEL LTD | Chip Capacitor;0805;C0G;50V;4700pF;�1% RoHS : Compliant | 0 | |||
| C0805HQN500-470FNP | VENKEL LTD | High-Q NP0 Chip Capacitor;0805;HQN;50V;47pF;�1% RoHS : Compliant | 0 | |||
C1206C0G500-470JNE | VENKEL LTD | Chip Capacitor;1206;C0G;50V;47pF;�5% RoHS : Compliant | 0 | |||
| C1812X7R500-475MNE | VENKEL LTD | Chip Capacitor;1812;X7R;50V;4.7uF;�20% RoHS : Compliant | 0 | |||
| CSMF0603-RK-R047JT | VENKEL LTD | Current Sense Metal Foil CR;0603;1/8W;�100PPM;47mR;�5% RoHS : Compliant | 0 | |||
| LCR0805-R047FT | VENKEL LTD | Low Value CR;0805;47m ohm;�1% RoHS : Compliant | 0 | |||
| C0402X7R500-471JNP | VENKEL LTD | Chip Capacitor;0402;X7R;50V;470pF;�5% RoHS : Compliant | 0 | |||
| C0603C0G250-471KNE | VENKEL LTD | Chip Capacitor;0603;C0G;25V;470pF;�10% RoHS : Compliant | 0 | |||
| C0603X5R100-475MNP | VENKEL LTD | Chip Capacitor;0603;X5R;10V;4.7uF;�20% RoHS : Compliant | 0 | |||
 Vyrian | 10-476808-189 | Amphenol Corporation | Connector Accessory, Clamping Item | 16,499 | ||
| APX803L20-47W5-7 | Diodes Incorporated | Power Supply Support Circuit, Fixed, 1 Channel, +4.7V, PDSO5 | 11,669 | |||
| 1923047 | Phoenix Contact | Modular Terminal Block, 32A, 4mm2, 1 Row(s), 2 Deck(s) RoHS : Compliant | 10,260 | |||
V62/04755-07XE | Texas Instruments | Operational Amplifier, 1 Func, 600uV Offset-Max, BIPolar, PDSO8 RoHS : Compliant | 9,008 | |||
| 3060474 | Phoenix Contact | Non-Metric items RoHS : Compliant | 9,006 | |||
| 2N5047 | Texas Instruments | Small Signal Field-Effect Transistor, 2-Element, N-Channel, Silicon, Junction FET, TO-71 RoHS : Not Compliant | 8,705 | |||
| 3047361 | Phoenix Contact | Labeling Materials RoHS : Compliant | 7,182 | |||
V62/04715-02YE | Texas Instruments | Registered Bus Transceiver, LVT Series, 2-Func, 8-Bit, True Output, BICMOS, PDSO56 RoHS : Compliant | 5,664 | |||
UPD78F0473GC-GAD-AX | Renesas Electronics Corporation | Microcontroller, 8-Bit, FLASH, UPD78K0 CPU, 10MHz, PQFP80 RoHS : Compliant | 5,570 | |||
| LM3478MMX-S5000472 | Texas Instruments | 4,818 | ||||
| 3047442 | Phoenix Contact | Modular Terminal Block, 10mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 4,669 | |||
| 3047280 | Phoenix Contact | Terminal Block Accessory, Jumper Item, PA66 RoHS : Compliant | 4,152 | |||
| 3047154 | Phoenix Contact | Terminal Block Accessory, End Cover RoHS : Compliant | 3,878 | |||
| 3047073 | Phoenix Contact | Terminal Block Accessory RoHS : Compliant | 787 | |||
| 260-4.7 | Xicon Passive Components | Fixed Resistor, Metal Glaze/thick Film, 0.1W, 4.7ohm, 150V, 5% +/-Tol, 400ppm/Cel, 0805 | 549 | |||
 Wuhan P&S | NFR25H0004707JA500 | Vishay Intertechnologies | Through hole resistor 470 m ���� 5% 0.5W RoHS : Compliant |
| 50,000 | |
| PR01000104707JA100 | Vishay Intertechnologies | PR01 5% A1 R47 RoHS : Compliant |
| 30,000 | ||
| T58W0475M025C0500 | Vishay Intertechnologies | 4.7 ? F tantalum capacitor RoHS : Compliant |
| 30,000 | ||
| NFR25H0004709JA500 | Vishay Intertechnologies | NFR25H 5% A5 47R RoHS : Compliant |
| 5,000 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼ 
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand