 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
081-S8-1024-R2 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 DB Roberts | NAS1802-08-10.D | Military Specifications | SCREW DFARS COMPLIANT REQUIRED |
| 52 | |
| E5-1-081-081 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| E5-2-081-081 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| 081061050001 | Essentra Components | 0 | ||||
| 20819699 | Essentra Components | 0 | ||||
| 20819743 | Essentra Components | 0 | ||||
| 90812110000 | Essentra Components | SWINGHANDLE LATCH, LIFT TURN | 0 | |||
| 74201-12081 | Avdel | LIP SEAL | 0 | |||
| E5-2-081-060 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| EZ00812 | Shercon Inc | PAINTDISCS KWIKDOT/EZPEEL13/16 | 0 | |||
| DMPC0708-1-1/2B | Essentra Components | 0.708 ID 1.500 LENGTHPVC DIP Y | 0 | |||
| RS-5017-0812 | Heyco | RS 0500 OD X171 ID X812 LG NAT | 0 | |||
| 081042511301 | Essentra Components | 0 | ||||
| 081A | Essentra Components | TAPERED CAPPLUGLDPE BLUE | 0 | |||
| E3-104-081 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
 EBV Elektronik | TJA1081GTS/0Z | NXP Semiconductors | Specialized Interface FlexRay Communication Transceiver 475 V 525 V SSOP 16 Pins (Alt: TJA1081GTS/0Z) RoHS : Compliant | 220,000 | ||
| QFBR-T081Z | Broadcom Limited | FiberOptic Components (Alt: QFBR-T081Z) RoHS : Compliant | 65,200 | |||
| KSZ8081RNAIA-TR | Microchip Technology Inc | PHY 1CH 100Mbps 24Pin QFNEP TR (Alt: KSZ8081RNAIA-TR) RoHS : Compliant | 40,000 | |||
KSZ8081RNACA-TR | Microchip Technology Inc | Ethernet Controller Single Chip Ethernet PHY Transceiver IEEE 8023 3135 V 3465 V QFN (Alt: KSZ8081RNACA-TR) RoHS : Compliant | 9,000 | |||
| PCF7991AT/1081/M,1 | NXP Semiconductors | Advanced Basestation IC Serial 14 Pins SOIC (Alt: PCF7991AT/1081/M,1) RoHS : Compliant | 7,500 | |||
| VS-E5TH0812-M3 | Vishay Intertechnologies | (Alt: VS-E5TH0812-M3) RoHS : Compliant | 7,200 | |||
MC14081BDR2G | onsemi | (Alt: MC14081BDR2G) RoHS : Compliant | 5,000 | |||
| KSZ8081RNBIA-TR | Microchip Technology Inc | PHY 1CH 100Mbps 32Pin QFNEP TR (Alt: KSZ8081RNBIA-TR) RoHS : Compliant | 5,000 | |||
| MC14081BDG | onsemi | (Alt: MC14081BDG) RoHS : Compliant | 3,355 | |||
| STM32L081CBT6 | STMicroelectronics | MCU 32Bit ARM CortexM0 RISC 128KB Flash 18V to 36V 48Pin LQFP Tray (Alt: STM32L081CBT6) RoHS : Compliant | 1,000 | |||
| STM32G081CBT6 | STMicroelectronics | MCU 32Bit STM32G081CB ARM Cortex M0 RISC 128KB Flash 17V to 36V 48Pin LQFP (Alt: STM32G081CBT6) RoHS : Compliant | 750 | |||
| KSZ8081MNXIA | Microchip Technology Inc | (Alt: KSZ8081MNXIA) RoHS : Compliant | 490 | |||
| STM32G081GBU6 | STMicroelectronics | Microcontroller 32Bit ARM CortexM0 RISC 128KByte Flash 33V 28Pin UFQFPN (Alt: STM32G081GBU6) RoHS : Compliant | 490 | |||
| STM32L081CZT6 | STMicroelectronics | MCU 32Bit Low Power STM32L 32MHz ARM Cortex M0 RISC 192kB Flash 48Pin LQFP Tray (Alt: STM32L081CZT6) RoHS : Compliant | 250 | |||
M48T08-150PC1 | STMicroelectronics | RTC YYMMDDdd HHMMSS Timekeeper Parallel 475 V to 55 V Supply DIP28 (Alt: M48T08-150PC1) RoHS : Compliant | 120 | |||
 ECCO | 031-0486-081 | ITT Interconnect Solutions |
| 1,201 | ||
| GS-SL-CA3106/08-12-&-12S | ITT Interconnect Solutions |
| 1,015 | |||
| 10-825926-081 | Amphenol Industrial Operations |
| 671 | |||
| GS-SL-CA3106/08-18 | ITT Interconnect Solutions |
| 126 | |||
| M24308/1-5F | ITT Interconnect Solutions | RoHS : Not Compliant |
| 112 | ||
| M24308/1-3Z | ITT Interconnect Solutions | RoHS : Not Compliant |
| 5 | ||
| M24308/1-5Z | ITT Interconnect Solutions | RoHS : Not Compliant |
| 5 | ||
| M24308/1-3F | ITT Interconnect Solutions | RoHS : Not Compliant |
| 3 | ||
| M24308/1-1F | ITT Interconnect Solutions | RoHS : Not Compliant |
| 1 | ||
| M24308/1-4Z | ITT Interconnect Solutions | RoHS : Not Compliant |
| 1 | ||
 Maritex | 39000081 | Molex | Rectangular Connector Contacts; 39000081; MOLEX; Tin; Crimp; 16 AWG; 16 AWG RoHS : Compliant |
| 34,439 | |
| RCML08100JT LEAD FREE 5%, T/B 4X10R | Fenghua (HK) Electronics Ltd | Chip array SMD; RAC4x10R; 1/16W; 5%; 4x0603; 1206 |
| 18,200 | ||
| 282108-1 | TE Connectivity | Automotive Connectors; 282108-1; TE CONNECTIVITY; Black; 6; No; 43.7896 mm RoHS : Compliant |
| 2,454 | ||
| FL160808-1R0K LFR | Prosperity Dielectrics Co Ltd | Inductor; SMD; 1uH; 0.025A; 0.6R; 0603; 10% |
| 2,354 | ||
DAC081C081CIMKX/NOPB | Texas Instruments | Analog-to-Digital Converters (ADC); DAC081C081CIMKX/NOPB; TEXAS INSTRUMENTS; 6; I2C; 5.5 V; 1 RoHS : Compliant |
| 1,856 | ||
| SD0J108M0811MPG | Samwha Electric Co Ltd | Electrolytic capacitor; 1000uF; 6.3V; 85deg.C; 8x11.5 r5mm; 2000h |
| 1,190 | ||
| 2EDGVC-5.08-10P-14-00Z(H) | Degson Electronics Co Ltd | Pluggable terminal block; pitch 5.08mm; 10-ways; male; vertical pin header; closed type; UL 300V/15A; TUV:320V/20A |
| 215 | ||
| 39301081 | Molex | Female Socket Headers; 39301081; MOLEX; 2; 8; 7 A; 8 RoHS : Compliant |
| 128 | ||
| 2EDGV-5.08-10P-14-00Z(H) | Degson Electronics Co Ltd | Pluggable terminal block; pitch 5.08mm; 10-ways; male; vertical pin header; open type; UL 300V/15A; TUV:320V/20A |
| 100 | ||
| 2EDGKA-5.08-10P-14-00Z(H) | Degson Electronics Co Ltd | Pluggable terminal block; 5.08mm pitch; 10-ways; female; for wire 2.50mm2(28-12AWG); wire insertion direction 90� to plug-in direction; p.bronze contacts; brass cage; UL 300V/15A TUV 320V/10A |
| 95 | ||
| 2EDGK-5.08-10P-14-00Z(H) | Degson Electronics Co Ltd | Pluggable terminal block; 5.08mm pitch; 10-ways; female; for wire 2.50mm2(28-12AWG); wire insertion direction same as plug-in direction; p.bronze contacts; brass cage; UL 300V/15A |
| 78 | ||
| 2EDGKF-5.08-10P-14-1000Z(H) | Degson Electronics Co Ltd | Pluggable terminal block; 5.08mm pitch; 10-ways; female; for wire 2.50mm2(28-12AWG); wire insertion direction same as plug-in direction; p.bronze contacts; brass cage; UL 300V/15A |
| 66 | ||
| 3208197 | Phoenix Contact | Wire to Board Terminals; 3208197; PHOENIX CONTACT; 30.5 mm; 26 AWG; 17.5 A; 14 AWG RoHS : Compliant |
| 30 | ||
| 2EDGR-5.08-10P-14-00Z(H) | Degson Electronics Co Ltd | Pluggable terminal block; pitch 5.08mm; 10-ways; male; R/A pin header; open type; UL 300V/15A; TUV:320V/20A |
| 10 | ||
| 3-350815-2 | TE Connectivity | Quick Connect, Disconnect Terminals; 3-350815-2; TE CONNECTIVITY; Brass; Insulated; Tin; 4.7498 mm RoHS : Compliant |
| 3 | ||
 Neutron USA | 09200030811 | HARTING Technology Group | Heavy Duty Power Connectors RoHS : Compliant |
| 50 | |
| 9RA0812H4001 | Sanyo-Denki Co Ltd | DC Fans DC Fan, 80x25mm, 12VDC, Low Noise, Tachometer RoHS : Compliant |
| 50 | ||
| GP3000S30-0.125-02-0816 | The Bergquist Company | Thermal Interface Products GAP PAD, Conductive, Soft, 8"x16" Sheet, 0.125" Thickness, IDH 2166303 |
| 50 | ||
| GPVOUS-0.080-AC-0816 | The Bergquist Company | Thermal Interface Products ThermalConduct .08" Adhsv on SilPad Side |
| 50 | ||
| GPVO-0.060-01-0816 | The Bergquist Company | Thermal Interface Products GAPPAD VO .060" 8X16" |
| 50 | ||
| GPVOUS-0.160-AC-0816 | The Bergquist Company | Thermal Interface Products Ultra Conformable, T hermally Conductive |
| 50 | ||
| 9RA0812P1H0011 | Sanyo-Denki Co Ltd | DC Fans DC Fan, 80x80x38mm, 12VDC, 77.3CFM, 7.92W, 46dBA, Ribless, Low Noise, Tach/PWM |
| 36 | ||
| 0815729 | Phoenix Contact | Wire Labels & Markers EML (40X15)R SR RoHS : Compliant |
| 3 | ||
| GP3500ULM-G-0.040-12-0816 | The Bergquist Company | Thermal Interface Products GAP PAD, Ultra-Low Modulus, 8"x16" Sheet, 0.040" Thickness, 2 Side Tack |
| 2 | ||
| 0815774 | Phoenix Contact | Terminal Block Tools & Accessories EML (D17.5)R RoHS : Compliant |
| 0 | ||
| 0819301 | Phoenix Contact | Wire Identification UC-EMLP (15X5) UNICARD 10 SECTION RoHS : Compliant |
| 0 | ||
| 9GV0812P1H031 | Sanyo-Denki Co Ltd | DC Fan 80x38mm 12VDC 36W, 131CFM 63dB, Guide Vane Tach PWM duty0% 39.2CFM |
| 0 | ||
| 9WP0812H401 | Sanyo-Denki Co Ltd | DC Fan Sq80x25mm 12VDC 1.56W, 36.4CFM, Splashproof Tach, Plastic F/B RoHS : Compliant |
| 0 | ||
| EMA108-10 | Eaton Corporation | Eaton ePDU G3 Managed 38U-A IN: L5-30P 24A 1P OUT: 24X5-20R |
| 0 | ||
| GPVOUS-0.060-00-0816 | The Bergquist Company | Thermal Interface Products THERMAL PAD 8X16" .060" GAP PAD VO |
| 0 | ||
 Pasternack Enterprises US | PE3W00811-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to SMA Male Low Loss Cable 12 Inch Length Using LMR-400-UF Coax., Radio frequency assembly SMA male to SMA male low loss cable 12 inch length using LMR-400-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male low loss cable 12 inch length using LMR-400-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W00811-12 can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3W00811-12 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male low loss cable 12 inch length using LMR-400-UF coax. |
| 358 | |
| PE3FCA108-10M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM4, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: UPC, Connector 2 Series: ST, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 200, Max Crush Resistance, Long Term (N/100mm): 50, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Simplex SC UPC to ST UPC, MM OM4, 2.0mm LSZH, Aqua-10M. Pasternack’s PE3FCA108-10M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long patch cable assembly is equipped with simplex SC/UPC to ST/UPC connectors. Our aqua blue fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This multimode OM4 patch cable assembly is optimized for ultra-high-speed, high-bandwidth data transmission, supporting greater distances and faster speeds than OM1 and OM3 fiber. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA108-10M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. Pasternack has one of the largest in-stock selections of SC/UPC to ST/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM4 multimode fiber optic cable that meets your requirements. |
| 48 | ||
| PE3FCA408-15M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM3, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 6.2 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 12-Fiber LC UPC to LC UPC, OM3 Multimode Distribution Cable, 6.2mm LSZH, 2.0mm breakout, Aqua-15M. Pasternack’s PE3FCA408-15M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 15-meter long 12-fiber cable assembly is equipped with LC/UPC to LC/UPC connectors. Our aqua blue fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM3 fiber which is optimized for VCSEL laser sources, making it ideal for 10Gb Ethernet up to 300 meters and 40G/100G Ethernet up to 100 meters, and offers a bandwidth of 2000 MHz·km, ensuring high-speed data transmission with minimal signal loss. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 12-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA408-15M fiber optic cable with a 6.2 mm cable diameter and 47 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/UPC to LC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Whether for enterprise networks, storage area networks (SANs), or high-speed backbones, this OM3 fiber assembly guarantees outstanding network performance. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM3 multimode fiber optic cable that meets your requirements. |
| 28 | ||
| PE3C10819-9 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMPS, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. 2.92mm Female to SMPS Female VITA 67.3 Cable 9 Inch Length Using PE-047SR Coax., Pasternack’s PE3C10819-9 VITA 67.3 2.92mm female to SMPS female RF cable assembly using PE-047SR coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm female to SMPS female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to SMPS cable assembly orders will ship the same business day as well. Pasternack RF coax VITA 67.3 cable assembly is built with a 2.92mm cable connection on one end and an SMPS cable connection on the other. Our 2.92mm to SMPS cable assembly has a female gender on end 1 and a female on end 2. PE3C10819-9 can also be known as a VITA 67.3 2.92mm jack to SMPS jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. Our VITA 67.3 cable is designed for use in high-density RF signal transmission applications in aerospace and defense, ground communication systems, radar systems, satellites, and embedded computing applications. This cable assembly employs durable and flexible materials, and with a 0.05-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The semi-rigid RF cable has a between series connection. Our 2.92mm female to SMPS female cable has a maximum VSWR of 1.4:1. This PE3C10819-9 2.92mm jack to SMPS jack cable assembly is built with PE-047SR, which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to SMPS cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the clamp/solder attachment method, while the other has the solder attachment method. Additional dimensions, specifications, and CAD drawings for this 9-inch-long VITA 67.3 RF cable are available on our downloadable PDF datasheet. PE3C10819-9 can also be used in the other direction and will be an SMPS female to 2.92mm female cable assembly if the opposite connectivity is required. This VITA 67.3 2.92mm jack to SMPS jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to SMPS cable assembly for quick shipment worldwide. Variations of 2.92mm and SMPS cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to SMPS VITA 67.3 RF cable assembly as per your requirements. |
| 4 | ||
| PE3C100081-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 1.85mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-TC142A, RF Cable Type: PE-TC142A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. 1.85mm Male to 1.85mm Male Low Loss Test Cable 100 CM Length Using PE-TC142A Coax., Pasternack’s PE3C100081-100CM low loss test 1.85mm male to 1.85mm male RF cable assembly using PE-TC142A coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to 1.85mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm cable assembly orders will ship the same business day as well. Pasternack RF coax low loss test cable assembly is built with a 1.85mm cable connection on one end and a 1.85mm cable connection on the other. Our 1.85mm to 1.85mm cable assembly has a male gender on end 1 and a male on end 2. PE3C100081-100CM can also be known as a low loss test 1.85mm plug to 1.85mm plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The 1.85mm to 1.85mm low loss test cable from Pasternack is ideal for applications including VNA test port extenders, semiconductor probe testing, precise bench-top testing and lab and production testing. This cable assembly employs durable and flexible materials, and with a 0.98-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100081-100CM RF cable has a ruggedized aramid yarn jacket of 0.141-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. This cable assembly has a typical propagation velocity of 77%. Our 1.85mm male to 1.85mm male cable has a maximum VSWR of 1.5:1. This PE3C100081-100CM 1.85mm plug to 1.85mm plug cable assembly is built with PE-TC142A, which is a flexible coax type. The Pasternack flexible 1.85mm cable assembly is manufactured with 1.85mm to 1.85mm cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 39.37-inch-long low loss test RF cable are available on our downloadable PDF datasheet. This low loss test 1.85mm plug to 1.85mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 1.85mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to 1.85mm low loss test RF cable assembly as per your requirements. |
| 1 | ||
| PE3W08122LF | Pasternack Enterprises | Key Specifications, Connector Series 1: Mini SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Mini SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR047AL, RF Cable Type: PE-SR047AL, RF Cable Impedance: 50 Ohm. Mini SMP Female to Mini SMP Female Cable Using PE-SR047AL Coax, LF Solder. PE3W08122LF is a Mini SMP female to Mini SMP female cable using PE-SR047AL coax. This Pasternack Mini SMP female to Mini SMP female cable assembly uses a 50 Ohm Mini SMP for connector 1 and a 50 Ohm Mini SMP for connector 2. Our female Mini SMP to female Mini SMP cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W08122LF Mini SMP female to Mini SMP female cable assembly is constructed with PE-SR047AL coax. | 0 | |||
| PE3W08135 | Pasternack Enterprises | Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm. Plug to MMCX Plug Cable Using RG188 Coax. PE3W08135 is a FAKRA plug to MMCX plug cable using RG188 coax. This Pasternack FAKRA plug to MMCX plug cable assembly uses a 50 Ohm FAKRA for connector 1 and a 50 Ohm MMCX for connector 2. Our plug FAKRA to plug MMCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08135 FAKRA plug to MMCX plug cable assembly is constructed with RG188 coax. | 0 | |||
| PE3W08180 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMC, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SSMC Jack Right Angle Bulkhead Cable Using RG178 Coax. PE3W08180 is a SMA male right angle to SSMC jack right angle bulkhead cable using RG178 coax. This Pasternack SMA male right angle to SSMC jack right angle bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SSMC for connector 2. SMA right angle to SSMC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to jack SSMC right anglebulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08180 SMA male right angle to SSMC jack right angle bulkhead cable assembly is constructed with RG178 coax. | 0 | |||
| PE3W10208-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMC, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. MMCX Plug Right Angle to SSMC Jack Bulkhead Cable 12 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly MMCX plug right angle to SSMC jack bulkhead cable 12 inch length using PE-SR405FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The MMCX plug right angle to SSMC jack bulkhead cable 12 inch length using PE-SR405FLJ coax, MMCX cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMCX to SSMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle MMCX cable connection on one end and SSMC bulkhead cable connection on the other. Our right angle MMCX to SSMC cable assemblies have a plug gender on end 1 and jack on end 2. PE3W10208-12 can also be known as a right angle MMCX male to SSMC female cable assembly and will be shipped same-day as it is purchased. MMCX male to SSMC female cable assembly PE3W10208-12 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable MMCX cable assembly is manufactured with right angle MMCX to SSMC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency MMCX right angle plug to SSMC jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10208-12 can also be used in the other direction and will be SSMC jack bulkhead to right angle MMCX plug cable assembly if the opposite connectivity is required. MMCX right angle male to SSMC female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMCX to SSMC cable assembly for quick shipment worldwide. Variations of MMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MMCX plug right angle to SSMC jack bulkhead cable 12 inch length using PE-SR405FLJ coax. |
| 0 | ||
| PE3W20816/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.4mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. 2.4mm Female to SMA Male Cable Using PE-P086HF Coax with HeatShrink. PE3W20816/HS is a 2.4mm female to SMA male cable using PE-P086HF coax. This Pasternack 2.4mm female to SMA male cable assembly uses a 50 Ohm 2.4mm for connector 1 and a 50 Ohm SMA for connector 2. Our female 2.4mm to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20816/HS 2.4mm female to SMA male cable assembly is constructed with PE-P086HF coax. | 0 | |||
| PE3C1081/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to MMCX Plug Right Angle Cable Using RG316 Coax with HeatShrink., Radio frequency assembly SMA female bulkhead to MMCX plug right angle cable using RG316 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female bulkhead to MMCX plug right angle cable using RG316 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to MMCX cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and right angle MMCX cable connection on the other. Our SMA to right angle MMCX cable assembly has female gender on end 1 and plug on end 2. PE3C1081/HS can also be known as a SMA jack to right angle MMCX male cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMA jack to MMCX male cable assembly PE3C1081/HS is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle MMCX cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this PE3C1081/HS RF cable are available on our downloadable PDF datasheet.PE3C1081/HS can also be used in the other direction and will be right angle MMCX plug to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to MMCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to MMCX cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. | 0 | |||
| PE3C4408-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male Right Angle to SSMC Plug Right Angle Cable 12 Inch Length Using RG316 Coax., Radio frequency assembly SMA male right angle to SSMC plug right angle cable 12 inch length using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to SSMC plug right angle cable 12 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SSMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and right angle SSMC cable connection on the other. Our right angle SMA to right angle SSMC cable assemblies have a male gender on end 1 and plug on end 2. This SMA to SSMC cable is a male to plug coax assembly, PE3C4408-12, can also be known as a right angle SMA plug to right angle SSMC male cable assembly and will be shipped same-day as it is purchased. SMA plug to SSMC male cable assembly PE3C4408-12 is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle SSMC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMA right angle male to SSMC right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4408-12 can also be used in the other direction and will be right angle SSMC plug to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SSMC right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SSMC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SSMC plug right angle cable 12 inch length using RG316 coax. |
| 0 | ||
| PE3C7081 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE3W01081 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C240, RF Cable Type: PE-C240, RF Cable Impedance: 50 Ohm. N Female to N Female Cable Using PE-C240 Coax. PE3W01081 is a N female to N female cable using PE-C240 coax. This Pasternack N female to N female cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our female N to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01081 N female to N female cable assembly is constructed with PE-C240 coax. | 0 | |||
| PE3W08101 | Pasternack Enterprises | Key Specifications, Connector Series 1: MMBX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm. Snap-On MMBX Plug Right Angle to SMA Male Cable Using RG188 Coax. PE3W08101 is a MMBX plug right angle to SMA male cable using RG188 coax. This Pasternack MMBX plug right angle to SMA male cable assembly uses a 50 Ohm MMBX for connector 1 and a 50 Ohm SMA for connector 2. MMBX right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MMBX right angle to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08101 MMBX plug right angle to SMA male cable assembly is constructed with RG188 coax. | 0 | |||
 Teledyne HiRel | CD4081BMJ//883 | Teledyne HiRel | QUAD 2-INPUT AND BUFFERED B SERIES GATE | 0 | ||
| CD4081BMW/883 | Teledyne HiRel | QUAD 2-INPUT AND BUFFERED B SERIES GATE | 0 | |||
| CY37512P208-100UM | Teledyne HiRel | PROGRAMMABLE LOGIC DEVICE, 128 MACROCELL, ELECTRICALLY ALTERABLE, 100 MHZ | 0 | |||
 Venkel Ltd. | LMCI1608-10NJT | VENKEL LTD | Low Value Multilayer Chip Inductor;0603;10nH;�5% RoHS : Compliant | 696,000 | ||
| MLF1608-1R0MT | VENKEL LTD | Multilayer Chip Inductor;0603;1uH;�20% RoHS : Compliant | 40,000 | |||
| TFCR0805-8W-C-2081BT | VENKEL LTD | Thin Film CR;0805;1/8W;�50PPM;2.08K;�0.1% RoHS : Compliant | 0 | |||
| TFCR1206-4W-K-2081DT | VENKEL LTD | Thin Film CR;1206;1/4W;�100PPM;2.08K;�0.5% RoHS : Compliant | 0 | |||
| TFCR1206-8W-E-2081FT | VENKEL LTD | Thin Film CR;1206;1/8W;�25PPM;2.08K;�1% RoHS : Compliant | 0 | |||
| TFCR1210-4W-C-2081BT-1K | VENKEL LTD | Thin Film CR;1210;1/4W;�50PPM;2.08K;�0.1% RoHS : Compliant | 0 | |||
| TFCR1210-4W-K-2081FT-1K | VENKEL LTD | Thin Film CR;1210;1/4W;�100PPM;2.08K;�1% RoHS : Compliant | 0 | |||
| TFCR2010-4W-E-2081DT | VENKEL LTD | Thin Film CR;2010;1/4W;�25PPM;2.08K;�0.5% RoHS : Compliant | 0 | |||
| FBC1808-151E | VENKEL LTD | High Current Ferrite Bead;1808;150R RoHS : Compliant | 0 | |||
| UPTF0603-16W-N-2081DT | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�10PPM;2.08K;�0.5% RoHS : Compliant | 0 | |||
| UPTF0603-16W-P-2081AT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�5PPM;2.08K;�0.05% RoHS : Compliant | 0 | |||
| UPTF1206-8W-P-2081AT | VENKEL LTD | Ultra Precision Thin Film CR;1206;1/8W;5PPM;2.08K;�0.05% RoHS : Compliant | 0 | |||
| LMCI1608-15NKT | VENKEL LTD | Low Value Multilayer Chip Inductor;0603;15nH;�10% RoHS : Compliant | 0 | |||
| TFCR2512-2W-C-2081FT | VENKEL LTD | Thin Film CR;2512;1/2W;�50PPM;2.08K;�1% RoHS : Compliant | 0 | |||
| TFCR2512-2W-E-2081BT | VENKEL LTD | Thin Film CR;2512;1/2W;�25PPM;2.08K;�0.1% RoHS : Compliant | 0 | |||
 Vyrian | 57102-F08-10ULF | Amphenol Communications Solutions | Board Connector, 10 Contact(s), 2 Row(s), Female, Straight, 0.079 inch Pitch, Solder Terminal, Locking, Black Insulator | 16,214 | ||
5962-01-408-1081 | Analog Devices Inc | Operational Amplifier, 1 Func, 2500uV Offset-Max, PDIP8 RoHS : Not Compliant | 9,537 | |||
| ADC0819CIN | Texas Instruments | ADC, Successive Approximation, 8-Bit, 1 Func, 19 Channel, Serial Access, PDIP28 | 7,282 | |||
| ADC081S051EVAL | Texas Instruments | 7,093 | ||||
DAC081C081CISD | Texas Instruments | D/A Converter, 1 Func, Serial Input Loading, 3us Settling Time RoHS : Not Compliant | 6,530 | |||
| AD80081X | Analog Devices Inc | 6,098 | ||||
| DAC081C081CIMK | National Semiconductor Corporation | D/A Converter, 1 Func, Serial Input Loading, 3us Settling Time, PDSO6 RoHS : Compliant | 5,687 | |||
| ADC08134CIWM | Texas Instruments | ADC, Successive Approximation, 8-Bit, 1 Func, 4 Channel, Serial Access, Bipolar, PDSO14 RoHS : Not Compliant | 5,103 | |||
| DAC081C081CISDX | Texas Instruments | D/A Converter, 1 Func, Serial Input Loading, 3us Settling Time RoHS : Not Compliant | 4,569 | |||
| 90814-0816 | Molex | Board Connector, 16 Contact(s), 2 Row(s), Male, Straight, 0.05 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator, Receptacle RoHS : Compliant | 4,301 | |||
| ADC081S021CISDX | Texas Instruments | ADC, Successive Approximation, 8-Bit, 1 Func, 1 Channel, Serial Access, CMOS, PDSO6 RoHS : Not Compliant | 4,186 | |||
| DT108/16GBZ | Kingston Technology Company | 4,084 | ||||
| DAC081C081CIMKX | Texas Instruments | D/A Converter, 1 Func, Serial Input Loading, 3us Settling Time, PDSO6 RoHS : Compliant | 3,981 | |||
| RCX081N20 | ROHM Semiconductor | Power Field-Effect Transistor, 8A I(D), 200V, 0.77ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-220AB RoHS : Compliant | 3,377 | |||
| PK8071305081500S-RM2Z | Intel Corporation | 2,144 | ||||
 Wuhan P&S | MC14081BDR2G | onsemi | B Suffix Series CMOS Gates RoHS : Compliant |
| 104,500 | |
| U77A16WH2081 | TE Connectivity | - |
| 6,000 | ||
| VS-E5TH0812-M3 | Vishay Intertechnologies | Hyperfast Rectifier, 8 A FRED Pt G5 RoHS : Compliant |
| 3,000 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼ 
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand