| Distributor | Part # | Manufacturer | Description | Price | Qty.
BuyNow |
Flip Electronics | NTHD4102PT1
| onsemi | Stock
RoHS : Not Compliant | | 42,000
 |
810251AGLF
| Renesas Electronics Corporation | Stock | | 25,000
|
810251AGILF
 | Integrated Device Technology Inc | Stock, Ship Today
RoHS : Compliant | | 25,000
|
EFR32BG21B020F1024IM32-BR
| Silicon Laboratories Inc | Stock, Ship Today | | 25,000
|
CY7C1021B-15ZC
 | Cypress Semiconductor | Stock
RoHS : Not Compliant | | 10,738
|
CY7C1021DV33-10VXI
| Infineon Technologies AG | Stock, Ship Today
RoHS : Compliant | | 6,794
|
MCH6102-TL-E
| onsemi | Stock, Ship Today
RoHS : Compliant | | 6,000
|
CY7C1021BNV33L-15ZI
| Cypress Semiconductor | Stock
RoHS : Not Compliant | | 5,259
|
T1020NSE7MQB
| NXP Semiconductors | Stock | | 1,275
|
P1023NSE5CFB
| NXP Semiconductors | Stock
RoHS : Compliant | | 358
|
RJK1021DPN-00#00
| Renesas Electronics Corporation | Stock
RoHS : Compliant | | 305
|
LS1023AXN7MQB
| NXP Semiconductors | Stock
RoHS : Compliant | | 254
|
LS1022AXE7EKB
| NXP Semiconductors | Stock, Ship Today | | 228
|
T1023NXE7PQA
| NXP Semiconductors | Stock, Ship Today
RoHS : Compliant | | 218
|
EP1S80F1020C7
 | Altera Corporation | Stock, Ship Today
RoHS : Not Compliant | | 84
|
Maritex | RS03K102JT 1K0
| Fenghua (HK) Electronics Ltd | Chip Resistor; SMD; 0603; 1K; 5%; 1/10W | 10,000 : $0.005
5,000 : $0.005
1,000 : $0.006
1 : $0.012
|
| 175,000
 |
MCASH105SB7102KFCA01
| TAIYO YUDEN | Ceramic Capacitors; MCASH105SB7102KFCA01; TAIYO YUDEN; 1 nF; 100 V; 1 mm
RoHS : Compliant | 30,000 : $0.025
10,000 : $0.035
1 : $0.108
|
| 50,000
|
RCA102RJLF
| Hong Kong Resistors Manufactory | Surface Mount Resistors; RCA102RJLF; HKR | 1,500 : $0.004
500 : $0.005
50 : $0.006
1 : $0.019
|
| 50,000
|
C0603X102J4RECAUTO
| KEMET Corporation | Ceramic Capacitors; C0603X102J4RECAUTO; KEMET; 1 nF; 16 V
RoHS : Compliant | 1,000 : $0.014
300 : $0.016
100 : $0.018
10 : $0.022
1 : $0.068
|
| 15,129
|
C1608B102K500NT
| Guangdong Hottech Industrrial Co | Ceramic capacitor SMD; 0603; 1.0nF; 50V; X7R; 10% | 4,000 : $0.009
1,000 : $0.011
100 : $0.013
1 : $0.014
|
| 14,382
|
RC-ML08W102JT
| Fenghua (HK) Electronics Ltd | Chip array SMD; RAC4x1k; 1/16W; 5%; 4x0603; 1206 | 5,000 : $0.004
2,500 : $0.006
500 : $0.007
1 : $0.008
|
| 13,310
|
MA1206XR102K102ERG
| Prosperity Dielectrics Co Ltd | Ceramic capacitor SMD; 1206; 1nF; 1000V; X7R; 10% | 12,000 : $0.036
4,000 : $0.04
1,000 : $0.044
1 : $0.11
|
| 7,291
|
JS-6001-02
| Chyao Shiunn Electronic Industrial Ltd | Header for PCB; pitch 2.54mm; 2-contacts; THT; male; top entry; 250V/3A | 5,000 : $0.013
1,000 : $0.015
500 : $0.017
1 : $0.02
|
| 6,107
|
C2012X7R2E102KT020U
| TDK Corporation | Ceramic Capacitors; C2012X7R2E102KT020U; TDK | 4,000 : $0.019
1,500 : $0.022
500 : $0.027
50 : $0.038
1 : $0.118
|
| 6,042
|
CT4-0805B102K500PF3
| Fenghua (HK) Electronics Ltd | Ceramic capacitor; 1nF; 50V; 10%
RoHS : Unknown | 5,000 : $0.032
2,500 : $0.036
1,000 : $0.041
500 : $0.043
1 : $0.045
|
| 1,956
|
MA1206XR-102K-102PR 1000PF 1000V 10% X7R
| Prosperity Dielectrics Co Ltd | Ceramic capacitor SMD; 1206; 1nF; 1000V; X7R; 10% | 12,000 : $0.089
4,000 : $0.101
1 : $0.153
|
| 930
|
MM-1018-L-10-20-S, AT10-20
| RRE | Micro Miniature Reed Switch RS-MM1018, Operate Band: 10-20AT, Switching Current (max): 0,5A, Dimensions: FI1,8x10mm, SMD | 100 : $1.026
50 : $1.148
25 : $1.202
10 : $1.261
1 : $1.292
|
| 249
|
CL10B102KB8NNND
 | Samsung Electro-Mechanics | Ceramic capacitor SMD; 0603; 1.0nF; 50V; X7R; 10%
RoHS : Compliant | 50,000 : $0.006
10,000 : $0.007
1,000 : $0.014
100 : $0.021
1 : $0.058
|
| 150
|
FN18X102K500
| Prosperity Dielectrics Co Ltd | Ceramic capacitor SMD; 0603; 1.0nF; 50V; X7R; 10% | 12,000 : $0.008
4,000 : $0.009
1,000 : $0.012
1 : $0.014
|
| 47
|
0603SAJ0102T5E
| Royal Electronic Factory (Thailand) Co Ltd | Chip Resistor; SMD; 0603; 1K; 5%; 1/10W
RoHS : Compliant | 100,000 : $0.001
50,000 : $0.001
15,000 : $0.001
5,000 : $0.001
1 : $0.001
|
| 10
|
Neutron USA | 1658-G21-02-P10-20A
| E-T-A | Circuit Breakers Very cost effective design to meet international requirements. No exposed metal parts which are current-carrying except for terminals. R-type TO CBE to EN 60934. Units built to order. For requests under 500 pcs contact Customer Servi
RoHS : Compliant | | 50
|
102010268
| Seeed Development Ltd | ATmega328P Microcontroller Development Board | | 50
|
102010248
| Seeed Development Ltd | Development Boards & Kits - ARM Seeeduino Cortex-M0+ | | 50
|
3549S-2AA-102/102A
| Bourns Inc | Precision Potentiometers PREC POT 2K .20% 7/8" 22MM DIA 10T WW
RoHS : Compliant | | 19
|
1.01.0210.20000
| Hms Industrial Networks AB | Interface Modules CAN-CR100 CAN/CAN FD Repeater BT | | 11
|
AMT102-D1024-I6350-S
| CUI Inc | Encoders AMT10, RADIAL, CAP, SINGLE ENDED, 1024 PPR, A/B/X, 6.35 MM, STANDARD BASE | | 5
|
102
| Switchcraft Conxall | Pushbutton Switches PUSH BUTTON SWITCH RED | | 1
|
1.01.0210.20210
| Hms Industrial Networks AB | Interface Modules CAN-CR120/HV CAN/CAN FD Repeater NBT | | 1
|
1.01.0210.20200
| Hms Industrial Networks AB | Interface Modules CAN-CR100 CAN/CAN FD Repeater NBT | | 0
|
17341102102
| HARTING Technology Group | Hard Metric Connectors 110P TYPE AB22 FEMALE MODULE
RoHS : Compliant | | 0
|
AMT102-D1024-I5000-S
| CUI Inc | Encoders AMT10, RADIAL, CAP, SINGLE ENDED, 1024 PPR, A/B/X, 5 MM, STANDARD BASE | | 0
|
3549S-2BA-102/102B
| Bourns Inc | Precision Potentiometers 2W 1K/1K 10% Dual Gang
RoHS : Compliant | | 0
|
102991023
| Seeed Development Ltd | Multiprotocol Development Tools The factory is currently not accepting orders for this product. | | 0
|
17241102102
| HARTING Technology Group | Connector, Rectang, Female Sockets, 132 pos (110 + 22 Ground), 5+1 row, Right Angle TH Mt, har-bus HM Federl. Typ-B22, m. Schirmbl.
RoHS : Compliant | | 0
|
1.01.102.011/0205
| RAFI GmbH & Co Kg | Pushbutton Switches - Industrial Pushbutton 18.2mm White
RoHS : Compliant | | 0
|
Pasternack Enterprises US | PE3C1028-60
| Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to N Male Right Angle Low Loss Cable 60 Inch Length Using LMR-400-UF Coax., Radio frequency assembly N male to N male right angle low loss cable 60 inch length using LMR-400-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable 60 inch length using LMR-400-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and right angle type N cable connection on the other. Our low loss type N to right angle N type cable assemblies have a male gender on end 1 and male on end 2. PE3C1028-60 can also be known as a low loss N type plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE3C1028-60 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency type N male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1028-60 can also be used in the other direction and will be right angle N type male to N type male cable assembly if the opposite connectivity is required. Low loss type N plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male right angle low loss cable 60 inch length using LMR-400-UF coax. | 1 : $156.99
25 : $149.14
50 : $141.29
100 : $135.01
|
| 416
|
PE3C10282-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-LLPX, RF Cable Type: LMR-240-LLPX, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Plenum N Male to N Male Low Loss Cable 24 Inch Length Using LMR-240-LLPX Coax with Times Microwave Components., Radio frequency assembly plenum N male to N male low loss cable 24 inch length using LMR-240-LLPX coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The plenum N male to N male low loss cable 24 inch length using LMR-240-LLPX coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss a type N to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10282-24 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10282-24 RF cable has a Fluoropolymer jacket of 0.214-inch diameter. The RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 90 dB. The Pasternack type N cable assembly is manufactured with type N to type N cable connectors and has a 50 Ohm impedance. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 1 : $64.19
10 : $62.91
25 : $61.62
100 : $60.34
|
| 101
|
PE3C6210-200CM
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 78.7402 inches. Plenum SMA Male to SMA Male Right Angle Low PIM Cable 200 cm Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum SMA male to SMA male right angle low PIM cable 200 cm length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum SMA male to SMA male right angle low PIM cable 200 cm length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-SM-LP SMA to TC-SPP250-SM-RA-LP SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-SM-LP SMA cable connection on one end and right angle TC-SPP250-SM-RA-LP SMA cable connection on the other. Our low PIM TC-SPP250-SM-LP SMA to right angle TC-SPP250-SM-RA-LP SMA cable assemblies have a male gender on end 1 and male on end 2. This TC-SPP250-SM-LP SMA to TC-SPP250-SM-RA-LP SMA cable is a male to male coax assembly, PE3C6210-200CM, can also be known as a low PIM TC-SPP250-SM-LP SMA plug to right angle TC-SPP250-SM-RA-LP SMA plug cable assembly and will be shipped same-day as it is purchased. TC-SPP250-SM-LP SMA plug to TC-SPP250-SM-RA-LP SMA plug cable assembly PE3C6210-200CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-SM-LP SMA cable assembly is manufactured with TC-SPP250-SM-LP SMA to right angle TC-SPP250-SM-RA-LP SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-SM-LP SMA male to TC-SPP250-SM-RA-LP SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6210-200CM can also be used in the other direction and will be right angle TC-SPP250-SM-RA-LP SMA male to TC-SPP250-SM-LP SMA male cable assembly if the opposite connectivity is required. Low PIM TC-SPP250-SM-LP SMA plug to TC-SPP250-SM-RA-LP SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-SM-LP SMA to TC-SPP250-SM-RA-LP SMA cable assembly for quick shipment worldwide. Variations of TC-SPP250-SM-LP SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum SMA male to SMA male right angle low PIM cable 200 cm length using SPP-250-LLPL coax using Times Microwave parts. | 1 : $156.99
25 : $149.14
50 : $141.29
100 : $135.01
|
| 37
|
PE3CA1022-3
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: HMCX32 1.2, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-81mm, RF Cable Type: 0.81mm, RF Cable Impedance: 50 Ohm, Length: 3 inches. Reverse Polarity SMA Female Bulkhead to HMCX32 1.2 Plug Cable 3 Inch Length Using 0.81mm Coax, RoHS., Radio frequency assembly reverse polarity SMA female bulkhead to HMCX32 1.2 plug cable 3 inch length using 0.81mm coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Reverse polarity SMA female bulkhead to HMCX32 1.2 plug cable 3 inch length using 0.81mm coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to HMCX32 1.2 cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with reverse polarity SMA bulkhead cable connection on one end and HMCX32 1.2 cable connection on the other. Our reverse polarity SMA to HMCX32 1.2 cable assemblies have a female gender on end 1 and plug on end 2. This reverse polarity SMA to HMCX32 1.2 cable is a female to plug coax assembly, PE3CA1022-3, can also be known as a reverse polarity SMA jack to HMCX32 1.2 male cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA jack to HMCX32 1.2 male cable assembly PE3CA1022-3 is built with 0.81mm which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to HMCX32 1.2 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency reverse polarity SMA female bulkhead to HMCX32 1.2 plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3CA1022-3 can also be used in the other direction and will be HMCX32 1.2 plug to reverse polarity SMA female bulkhead cable assembly if the opposite connectivity is required. SMA reverse polarity jack bulkhead to HMCX32 1.2 male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to HMCX32 1.2 cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA female bulkhead to HMCX32 1.2 plug cable 3 inch length using 0.81mm coax, RoHS. | 1 : $18.39
25 : $17.47
50 : $16.55
100 : $15.82
|
| 20
|
PE3CA1026-9
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: UMCX 2.5, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 9 inches. SMA Male to UMCX 2.5 Plug Cable 9 Inch Length Using RG178 Coax, RoHS., Radio frequency assembly SMA male to UMCX 2.5 plug cable 9 inch length using RG178 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to UMCX 2.5 plug cable 9 inch length using RG178 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to UMCX 2.5 cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and UMCX 2.5 cable connection on the other. Our SMA to UMCX 2.5 cable assemblies have a male gender on end 1 and plug on end 2. This SMA to UMCX 2.5 cable is a male to plug coax assembly, PE3CA1026-9, can also be known as a SMA plug to UMCX 2.5 male cable assembly and will be shipped same-day as it is purchased. SMA plug to UMCX 2.5 male cable assembly PE3CA1026-9 is built with RG178 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to UMCX 2.5 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency SMA male to UMCX 2.5 plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3CA1026-9 can also be used in the other direction and will be UMCX 2.5 plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to UMCX 2.5 male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to UMCX 2.5 cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to UMCX 2.5 plug cable 9 inch length using RG178 coax, RoHS. | 1 : $37.49
25 : $35.62
50 : $33.74
100 : $32.24
|
| 2
|
PE3CA1040-102CM
| Pasternack Enterprises | | 1 : $171.99
25 : $163.39
50 : $154.79
100 : $147.91
|
| 2
|
PE2CP1027
| Pasternack Enterprises | | 1 : $813.99
5 : $781.43
10 : $748.87
|
| 1
|
PE34210-24
| Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 24 inches. N Male to N Male Right Angle Cable 24 Inch Length Using RG316 Coax., Radio frequency assembly N male to N male right angle cable 24 inch length using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N male right angle cable 24 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and right angle type N cable connection on the other. Our type N to right angle N type cable assemblies have a male gender on end 1 and male on end 2. This N type to type N cable is a male to male coax assembly, PE34210-24, can also be known as a type N plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to N type plug cable assembly PE34210-24 is built with RG316 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency type N male to N type right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34210-24 can also be used in the other direction and will be right angle type N male to type N male cable assembly if the opposite connectivity is required. Type N plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male right angle cable 24 inch length using RG316 coax. | 1 : $97.39
25 : $92.52
50 : $87.65
100 : $83.76
|
| 0
|
PE3C10221
| Pasternack Enterprises | | | 0
|
PE3C10258
| Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: F, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-75-DB, RF Cable Type: LMR-240-75-DB, RF Cable Impedance: 75 Ohm. 75 Ohm BNC Male to 75 Ohm F Male Low Loss Cable Using 75 Ohm LMR-240-75-DB Coax with Times Microwave Components., Radio frequency assembly 75 Ohm BNC male to 75 Ohm F male low loss cable using 75 Ohm LMR-240-75-DB coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 75 Ohm BNC male to 75 Ohm F male low loss cable using 75 Ohm LMR-240-75-DB coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to type F cable assembly orders will ship same business day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and type F cable connection on the other. Our low loss BNC to F type cable assembly has male gender on end 1 and male on end 2. PE3C10258 can also be known as a low loss BNC plug to type F plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and Foam PE dielectric type. Our PE3C10258 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The RF cable has a between series connection. BNC plug to type F plug cable assembly PE3C10258 is built with LMR-240-75-DB which is a coax type. The Pasternack BNC cable assembly is manufactured with BNC to F type cable connectors, has a 75 Ohm impedance. One connector features the crimp attachment method and a brass body with tri-metal plating, while the other has crimp/solder attachment method and nickel body with gold over copper plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10258 can also be used in the other direction and will be type F male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to type F plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to F type cable assembly for quick shipment worldwide. Variations of BNC and F type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to F low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | | 0
|
PE3C10258-12
| Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: F, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-75-DB, RF Cable Type: LMR-240-75-DB, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm BNC Male to 75 Ohm F Male Low Loss Cable 12 Inch Length Using 75 Ohm LMR-240-75-DB Coax with Times Microwave Components., Radio frequency assembly 75 Ohm BNC male to 75 Ohm F male low loss cable 12 inch length using 75 Ohm LMR-240-75-DB coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 75 Ohm BNC male to 75 Ohm F male low loss cable 12 inch length using 75 Ohm LMR-240-75-DB coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to type F cable assembly orders will ship same business day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and F type cable connection on the other. Our low loss BNC to type F cable assembly has male gender on end 1 and male on end 2. PE3C10258-12 can also be known as a low loss BNC plug to type F plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and Foam PE dielectric type. Our PE3C10258-12 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The RF cable has a between series connection. BNC plug to F type plug cable assembly PE3C10258-12 is built with LMR-240-75-DB which is a coax type. The Pasternack BNC cable assembly is manufactured with BNC to type F cable connectors, has a 75 Ohm impedance. One connector features the crimp attachment method and a brass body with tri-metal plating, while the other has crimp/solder attachment method and nickel body with gold over copper plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10258-12 can also be used in the other direction and will be type F male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to F type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to F type cable assembly for quick shipment worldwide. Variations of BNC and F type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to F low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 1 : $141.99
10 : $139.15
25 : $136.31
100 : $133.47
|
| 0
|
PE3C10261-36
| Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-75, RF Cable Type: LMR-400-75, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm BNC Male to 75 Ohm BNC Male Low Loss Cable 36 Inch Length Using 75 Ohm LMR-400-75 Coax With Times Microwave Components., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male low loss cable 36 inch length using 75 Ohm LMR-400-75 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male low loss cable 36 inch length using 75 Ohm LMR-400-75 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a BNC cable connection on the other. Our low loss a BNC to a BNC cable assembly has male gender on end 1 and male on end 2. PE3C10261-36 can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has beryllium copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10261-36 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. BNC plug to BNC plug cable assembly PE3C10261-36 is built with LMR-400-75 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors and has a 75 Ohm impedance. Both the connectors have a crimp attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss BNC plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 1 : $158.99
10 : $155.81
25 : $152.63
100 : $149.45
|
| 0
|
PE3C9102
| Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm. TNC Male to TNC Male Cable Using PE-SR405AL Coax. PE3C9102 is a TNC male to TNC male cable using PE-SR405AL coax. This Pasternack TNC male to TNC male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our male TNC to male TNC cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3C9102 TNC male to TNC male cable assembly is constructed with PE-SR405AL coax. | | 0
|
PE3W03102
| Pasternack Enterprises | Key Specifications, Connector Series 1: F, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: F, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG6-CATV, RF Cable Type: RG6-CATV, RF Cable Impedance: 75 Ohm. 75 Ohm F Male to 75 Ohm F Male Cable Using 75 Ohm RG6-CATV Coax. PE3W03102 is a F male to F male cable using RG6-CATV coax. This Pasternack F male to F male cable assembly uses a 75 Ohm F for connector 1 and a 75 Ohm F for connector 2. Our male F to male F cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE3W03102 F male to F male cable assembly is constructed with RG6-CATV coax. | | 0
|
PE3W08810-24
| Pasternack Enterprises | Key Specifications, Connector Series 1: MHV, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MHV, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm, Length: 24 inches. MHV Female to MHV Male Cable 24 Inch Length Using RG141 Coax., Radio frequency assembly MHV female to MHV male cable 24 inch length using RG141 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MHV female to MHV male cable 24 inch length using RG141 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MHV to MHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MHV cable connection on one end and MHV cable connection on the other. Our MHV to MHV cable assemblies have a female gender on end 1 and male on end 2. This MHV to MHV cable is a female to male coax assembly, PE3W08810-24, can also be known as a MHV jack to MHV plug cable assembly and will be shipped same-day as it is purchased. MHV jack to MHV plug cable assembly PE3W08810-24 is built with RG141 which is a flexible coax type. The Pasternack flexible MHV cable assembly is manufactured with MHV to MHV cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 300 MHz maximum frequency MHV female to MHV male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08810-24 can also be used in the other direction and will be MHV male to MHV female cable assembly if the opposite connectivity is required. MHV jack to MHV plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MHV to MHV cable assembly for quick shipment worldwide. Variations of MHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MHV female to MHV male cable 24 inch length using RG141 coax. | 1 : $126.99
25 : $120.64
50 : $114.29
100 : $109.21
|
| 0
|
TE Connectivity | RN102-1-02-3M0
| TE Connectivity | RN102-1-02-3M0 Operating Voltage (Max): 300 VDC Current Rating (Max): 1 A Input Termination Type: PCB Terminal Pollution Degree: PD2 Output Termination Type: PCB Terminal 300 VDC 1 A PCB Terminal PD2 | TE Connectivity
RoHS : Compliant | 25 : $3.24
10 : $3.49
1 : $3.74
|
| 23,658
|
0410-241-0406
| TE Connectivity | INSERT SEAL, CRIMP SLEEVE REDUCER Connector Seal & Plug Type: Cavity Reducer Operating Temperature Range: -55 – 125 °C Operating Temperature Range: -67 – 257 °F Primary Product Material: Silicone Rubber Operating Temperature (Max): 125 °C Cavity Reducer Max Temp: -55 – 125 °C | Silicone Rubber | TE Connectivity
RoHS : Compliant | | 17,843
|
2309410-2
| TE Connectivity | DDR4 SODIMM 260P 5.2H RVS DRAM Type: Small Outline (SO) Stack Height: .205 in Stack Height: 5.2 mm Module Orientation: Right Angle Number of Positions: 200 260 Small Outline (SO) .205" 5.2 mm Right Angle | .205" | TE Connectivity
RoHS : Compliant | 1,000 : $1.56
500 : $1.61
250 : $1.66
100 : $1.71
50 : $1.76
1 : $1.93
|
| 7,135
|
1-102241-2
| TE Connectivity | 14 MODIV HSG COMP SR .100 POL Number of Positions: 14 Connector & Housing Type: Receptacle Connector Product Type: Housing Mating Retention: With Mating Retention Type: Detent Latching 14 Receptacle Housing With | TE Connectivity
RoHS : Compliant | 5,000 : $1.28
2,500 : $1.31
1,000 : $1.34
500 : $1.37
250 : $1.4
100 : $1.43
50 : $1.47
25 : $1.5
10 : $1.53
1 : $1.56
|
| 4,108
|
1028-021-0205
| TE Connectivity | BKSHL, 2P, BLK, REC, ST, NW 7.5/8.5 Number of Positions: 2 Primary Product Color: Black Protection & Strain Relief Accessory Type: Backshell Primary Product Material: PA 6 Cable Exit Angle: 180 ° 2 Black Backshell PA 6 | TE Connectivity
RoHS : Compliant | | 2,870
|
1-102241-8
| TE Connectivity | 20 MODIV HSG COMP SR .100 POL Number of Positions: 20 Connector & Housing Type: Receptacle Connector Product Type: Housing Mating Retention: With Mating Retention Type: Detent Latching 20 Receptacle Housing With | TE Connectivity
RoHS : Compliant | 10,000 : $2.42
5,000 : $2.48
2,500 : $2.53
1,000 : $2.58
500 : $2.64
250 : $2.69
100 : $2.75
50 : $2.8
25 : $2.85
10 : $2.91
1 : $2.96
|
| 1,444
|
1-102694-0
| TE Connectivity | 10 AMPMODU MT ASSY DR .100CL TE Connectivity
RoHS : Compliant | 10,000 : $9.77
5,000 : $9.99
2,500 : $10.2
1,000 : $10.42
500 : $10.64
250 : $10.86
100 : $11.07
50 : $11.29
25 : $11.51
10 : $11.72
1 : $11.94
|
| 1,170
|
1-102618-0
| TE Connectivity | 24 MODII HDR DRST SHRD .100CL PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Board-to-Board Board-to-Board Configuration: Mezzanine (Stacking) Number of Positions: 24 PCB Mount Header Vertical Board-to-Board Mezzanine (Stacking) | Ampseal Header | TE Connectivity
RoHS : Compliant | 2,500 : $7.54
1,000 : $7.74
500 : $7.95
250 : $8.15
100 : $8.35
50 : $8.56
25 : $8.76
10 : $8.96
1 : $9.17
|
| 1,137
|
1-102387-3
| TE Connectivity | 44 MOD IV HSG COMP DR .100 POL Number of Positions: 44 Connector & Housing Type: Receptacle Connector Product Type: Housing Mating Retention: Without Termination Method to Wire & Cable: Crimp 44 Receptacle Housing Without | TE Connectivity
RoHS : Compliant | 500 : $7.34
250 : $7.59
100 : $7.84
50 : $8.09
25 : $8.35
10 : $8.6
1 : $8.85
|
| 1,095
|
1-102681-2
| TE Connectivity | 34 AMPMODU MT COVER DR .100CL Connector Cover Type: Latching Cover Primary Product Color: Black Primary Product Material: Thermoplastic Number of Positions: 34 Operating Temperature (Max): 105 °C Latching Cover Black | Thermoplastic | TE Connectivity
RoHS : Compliant | 5,000 : $4.39
2,500 : $4.5
1,000 : $4.6
500 : $4.71
250 : $4.82
100 : $4.92
50 : $5.03
25 : $5.14
10 : $5.24
1 : $5.35
|
| 630
|
5102160-5
| TE Connectivity | A/L UNIV HDR 24P RA Connector System: Wire-to-Board Number of Positions: 24 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in PCB Mount Retention: Without Wire-to-Board 24 2.54 mm .1" | Ampseal Header | TE Connectivity
RoHS : Compliant | 1,000 : $4.92
500 : $5.05
250 : $5.21
100 : $5.39
50 : $5.54
1 : $6.08
|
| 385
|
1-102681-5
| TE Connectivity | 40 AMPMODU MT COVER DR .100CL Connector Cover Type: Latching Cover Primary Product Color: Black Primary Product Material: Thermoplastic Number of Positions: 40 Operating Temperature (Max): 105 °C Latching Cover Black | Thermoplastic | TE Connectivity
RoHS : Compliant | 5,000 : $4.13
2,500 : $4.24
1,000 : $4.34
500 : $4.44
250 : $4.54
100 : $4.64
50 : $4.74
25 : $4.84
10 : $4.94
1 : $5.04
|
| 285
|
1028-041-0205
| TE Connectivity | BKSHL, 2P, BLK, PLG, ST, NW 8.5 Number of Positions: 2 Primary Product Color: Black Protection & Strain Relief Accessory Type: Backshell Primary Product Material: PBT Cable Exit Angle: 180 ° 2 Black Backshell PBT | TE Connectivity
RoHS : Compliant | | 239
|
0411-027-0405
| TE Connectivity | EXT TOOL, SIZE 4, 4 AWG, N, BLK Insertion & Extraction Tool Type: Contact Extraction Insertion & Extraction Tool Application: Contact-to-Housing Contact Extraction Contact-to-Housing | Insertion And Extraction Tool | TE Connectivity
RoHS : Compliant | | 229
|
5102160-8
| TE Connectivity | A/L UNIV HDR 34P RA Connector System: Wire-to-Board Number of Positions: 34 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in PCB Mount Retention: Without Wire-to-Board 34 2.54 mm .1" | Ampseal Header | TE Connectivity
RoHS : Compliant | 1,000 : $4.72
500 : $4.85
250 : $5.0
100 : $5.17
50 : $5.32
1 : $5.84
|
| 26
|
Venkel Ltd. | CR1210-2W-5102FT
| VENKEL LTD | Chip Resistor;1210;1/2W;51K ;�1%
RoHS : Compliant | | 0
|
MELFC0102-UK-9102FT
| VENKEL LTD | MELF Coated Thin Film CR;0102;1/5W;�100PPM;91K;�1%
RoHS : Compliant | | 0
|
MELFC0102-YC-1023DT
| VENKEL LTD | MELF Coated Thin Film CR;0102;1/3W;�50PPM;102K;�0.5%
RoHS : Compliant | | 0
|
C1825C0G102-102JNE
| VENKEL LTD | HV Chip Capacitor;1825;C0G;1000V;1000pF;�5%
RoHS : Compliant | | 0
|
MELFC0102-UZ-1021BT
| VENKEL LTD | MELF Coated Thin Film CR;0102;1/5W;�15PPM;1.02K;�0.1%
RoHS : Compliant | | 0
|
MELFC0102-UZ-1102BT
| VENKEL LTD | MELF Coated Thin Film CR;0102;1/5W;�15PPM;11K;�0.1%
RoHS : Compliant | | 0
|
MELFC0102-YC-1020DT
| VENKEL LTD | MELF Coated Thin Film CR;0102;1/3W;�50PPM;102R;�0.5%
RoHS : Compliant | | 0
|
MELFC0102-RE-2102FT
| VENKEL LTD | MELF Coated Thin Film CR;0102;1/8W;�25PPM;21K;�1%
RoHS : Compliant | | 0
|
MELFC0102-RZ-5102BT
| VENKEL LTD | MELF Coated Thin Film CR;0102;1/8W;�15PPM;51K;�0.1%
RoHS : Compliant | | 0
|
C1808C0G102-102KNE
| VENKEL LTD | HV Chip Capacitor;1808;C0G;1000V;1000pF;�10%
RoHS : Compliant | | 0
|
MELFC0102-RC-1021DT
| VENKEL LTD | MELF Coated Thin Film CR;0102;1/8W;�50PPM;1.02K;�0.5%
RoHS : Compliant | | 0
|
MELFC0102-RC-1102DT
| VENKEL LTD | MELF Coated Thin Film CR;0102;1/8W;�50PPM;11K;�0.5%
RoHS : Compliant | | 0
|
MELFC0102-UK-1020FT
| VENKEL LTD | MELF Coated Thin Film CR;0102;1/5W;�100PPM;102R;�1%
RoHS : Compliant | | 0
|
MELFC0102-UZ-5102FT
| VENKEL LTD | MELF Coated Thin Film CR;0102;1/5W;�15PPM;51K;�1%
RoHS : Compliant | | 0
|
UPTF2010-2W-P-1022AT
| VENKEL LTD | Ultra Precision Thin Film CR;2010;1/2W;�5PPM;10.2K;�0.05%
RoHS : Compliant | | 0
|
English ▼ 
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand