| Electronic Components Datasheet Search |
|
1077M3A-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Ameya Holding Limited | BU21077MUV-E2 | ROHM Semiconductor | RoHS : Compliant |
| 50 | |
![]() NexGen Digital | 0532610771 | Molex | RoHS : Compliant | 636 | ||
![]() Avnet Silica | NCP1077STAT3G | onsemi | (Alt: NCP1077STAT3G) RoHS : Compliant | 0 | ||
| NCP1077STBT3G | onsemi | (Alt: NCP1077STBT3G) RoHS : Compliant | 0 | |||
| NCP1077STCT3G | onsemi | (Alt: NCP1077STCT3G) RoHS : Compliant | 0 | |||
| NCV1077CSTBT3G | onsemi | Automotive HighVoltage Switching Regulator 47 Ohm 800 mA Ipk 100 kHz with No BrownIn (Alt: NCV1077CSTBT3G) RoHS : Compliant | 0 | |||
| NCP1077AAP100G | onsemi | Enhanced Off line Switcher for Robust and Highly Efficient Power Supplies (Alt: NCP1077AAP100G) RoHS : Compliant | 0 | |||
| TGA2533-SM/1077834 | Qorvo | 125155 GHz Ku Bd PA (Alt: 1077834) RoHS : Compliant | 0 | |||
| FP11077_LISA2-WW-CLIP | LEDIL | LENS ROUND 1 POS 99MM OD 68MM H (Alt: FP11077_LISA2-WW-CLIP) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | CAB.01077 | Taoglas Antenna Solutions | IPEX MHFI(U.FL) to 100mm 1.37mm Black Bare Cut End |
| 0 | |
![]() EBV Elektronik | NCP1077STAT3G | onsemi | (Alt: NCP1077STAT3G) RoHS : Compliant | 0 | ||
| NCP1077STBT3G | onsemi | (Alt: NCP1077STBT3G) RoHS : Compliant | 0 | |||
| NCP1077STCT3G | onsemi | (Alt: NCP1077STCT3G) RoHS : Compliant | 0 | |||
| NCV1077CSTBT3G | onsemi | Automotive HighVoltage Switching Regulator 47 Ohm 800 mA Ipk 100 kHz with No BrownIn (Alt: NCV1077CSTBT3G) RoHS : Compliant | 0 | |||
| SI1077X-T1-GE3 | Vishay Intertechnologies | (Alt: SI1077X-T1-GE3) RoHS : Compliant | 0 | |||
| NCP1077AAP100G | onsemi | Enhanced Off line Switcher for Robust and Highly Efficient Power Supplies (Alt: NCP1077AAP100G) RoHS : Compliant | 0 | |||
| AUIRFS3107-7TRL | Infineon Technologies AG | Trans MOSFET NCH 75V 260A 7Pin6Tab D2PAK TR (Alt: SP001520264) RoHS : Compliant | 0 | |||
| FP11077_LISA2-WW-CLIP | LEDIL | LENS ROUND 1 POS 99MM OD 68MM H (Alt: FP11077_LISA2-WW-CLIP) RoHS : Compliant | 0 | |||
![]() Pasternack Enterprises US | PE3FCA107-7M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM4, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: UPC, Connector 2 Series: ST, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 200, Max Crush Resistance, Long Term (N/100mm): 50, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Simplex SC UPC to ST UPC, MM OM4, 2.0mm Riser, Aqua-7M. Pasternack’s PE3FCA107-7M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 7-meter long patch cable assembly is equipped with simplex SC/UPC to ST/UPC connectors. Our aqua blue fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This multimode OM4 patch cable assembly is optimized for ultra-high-speed, high-bandwidth data transmission, supporting greater distances and faster speeds than OM1 and OM3 fiber. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA107-7M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. Pasternack has one of the largest in-stock selections of SC/UPC to ST/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM4 multimode fiber optic cable that meets your requirements. |
| 124 | |
| PE91077 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: ZMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 18 GHz, Adapter Body Style: Straight, Connector Mount Method 1: None, Connector Mount Method 2: None. Precision SMA Female to ZMA Jack Adapter, 4 Lug. SMA adapter PE91077 is one of over 40,000 available RF, microwave and millimeter wave components from Pasternack. Our SMA to ZMA adapter is a between series coaxial adapter design. This 50 Ohm SMA adapter is precision manufactured to RF components industry specifications and has a maximum frequency of 18 GHz. SMA female to ZMA jack adapter is one of the many RF components that ship same day as they are ordered. PE91077 female SMA to jack ZMA adapter has a straight body. This Pasternack straight SMA coax adapter is a in-line RF adapter. Our female SMA to jack ZMA adapter PE91077 is shipped from our facility certified to ISO 9001:2015 the same day as purchased. This 4 lug SMA to ZMA radio frequency adapter is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 27 | ||
| PEWCA1077 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-340, Coax Connector Impedance: 50 Ohm, Coax Connector Series: N, Coax Connector Gender: Female, Waveguide Adapter Style: Right Angle, Minimum Frequency: 2.17 GHz, Maximum Frequency: 3.3 GHz, Maximum VSWR: 1.25:1. WR-340 UDR26 Flange to N Female Waveguide to Coax Adapter Operating from 2.17 GHz to 3.3 GHz. PEWCA1077 WR-340 waveguide to coax adapter is also known as a WR-340 waveguide transition. This waveguide to coax adapter / transition is constructed as a WR-340 to type N connector and has a female gender. Our WR340 to type N female waveguide adapter transition has a right angle design and has a UDR26 flange. Pasternack right angle WR-340 to N type waveguide to coaxial cable transition / adapter has a minimum frequency of 2.17 GHz and a maximum frequency of 3.3 GHz. WR 340 waveguide to type N transition adapter to coax PEWCA1077 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our WR-340 waveguide adapter transition with type N interface can ship worldwide the same day that it is purchased as with our other available RF parts. |
| 9 | ||
| PEWAN1077 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-15, Frequency, Min: 55 GHz, Frequency, Max: 65 GHz, Beam Width V: 4, Beam Width H: 4. WR-15 Waveguide Lens Horn Antenna Operating from 55 GHz to 65 GHz with a Nominal 32 dBi Gain with UG-385/U Round Cover Flange. Pasternack’s PEWAN1077 WR-15 waveguide horn is also known as a waveguide horn antenna. This WR-15 lens horn waveguide antenna has a nominal gain of 32 dBi. Our waveguide horn can operate at frequencies ranging from 55 to 65 GHz. The lens horn antenna with linear polarization has a typical VSWR of 1.5:1 and is suitable for test and measurement industries. This 32 dBi waveguide horn from Pasternack has an overall length of 6.16 inches, a width of 3 inches, and a weight of 0.77 lbs. Our WR-15 waveguide horn antenna has a typical vertical beam width of 4 degrees and a horizontal beam width of 4 degrees at 3 dB. Our antenna comes with a UG-385/U round cover flange and is built to precise microwave and millimeter wave horn antenna design specifications. This WR-15 lens horn antenna has an aluminum body. Additional dimensions and specifications for this antenna are on our downloadable PDF datasheet. This WR-15 waveguide horn antenna with 32 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Our horn antenna can ship worldwide on the same business day as it is purchased with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 5 | ||
| PE3C10770-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 3.5mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 1.85mm Male to 3.5mm Female Bulkhead Cable 12 Inch Length Using PE-SR405FLJ Coax., Pasternack’s PE3C10770-12 1.85mm male to 3.5mm female bulkhead RF cable assembly using PE-SR405FLJ coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to 3.5mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to 3.5mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and a 3.5mm bulkhead cable connection on the other. Our 1.85mm to 3.5mm cable assembly has a male gender on end 1 and a female on end 2. PE3C10770-12 can also be known as a 1.85mm plug to 3.5mm jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10770-12 RF cable has an FEP jacket of 0.105-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 105 degrees C. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 100 dB. Our 1.85mm male to bulkhead 3.5mm female cable has a maximum VSWR of 1.4:1. This PE3C10770-12 1.85mm plug to 3.5mm jack cable assembly is built with PE-SR405FLJ, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to 3.5mm cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method and a beryllium copper body with gold over nickel plating, while the other has the clamp/solder attachment method and a stainless steel body with passivated plating. Additional dimensions, specifications, and CAD drawings for this 12-inch-long RF cable are available on our downloadable PDF datasheet. PE3C10770-12 can also be used in the other direction and will be a 3.5mm female bulkhead to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to 3.5mm jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 3.5mm cable assembly for quick shipment worldwide. Variations of 1.85mm and 3.5mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to 3.5mm RF cable assembly as per your requirements. |
| 2 | ||
| PE3C10774-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 1.85mm Male to SMA Male Cable 12 Inch Length Using PE-SR405FLJ Coax., Pasternack’s PE3C10774-12 1.85mm male to SMA male RF cable assembly using PE-SR405FLJ coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and an SMA cable connection on the other. Our 1.85mm to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3C10774-12 can also be known as a 1.85mm plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10774-12 RF cable has an FEP jacket of 0.105-inch diameter. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 100 dB. Our 1.85mm male to SMA male cable has a maximum VSWR of 1.4:1. This PE3C10774-12 1.85mm plug to SMA plug cable assembly is built with PE-SR405FLJ, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method and a beryllium copper body with gold over nickel plating, while the other has the solder/solder attachment method and a brass body with gold over nickel plating. Additional dimensions, specifications, and CAD drawings for this 12-inch-long RF cable are available on our downloadable PDF datasheet. PE3C10774-12 can also be used in the other direction and will be an SMA male to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to SMA cable assembly for quick shipment worldwide. Variations of 1.85mm and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to SMA RF cable assembly as per your requirements. |
| 2 | ||
| PE3C10772-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Mini SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. 1.85mm Male to Mini SMP Female Right Angle Cable 6 Inch Length Using PE-SR405FLJ Coax., Pasternack’s PE3C10772-6 1.85mm male to right angle mini SMP female RF cable assembly using PE-SR405FLJ coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to mini SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to mini SMP cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and a right angle mini SMP cable connection on the other. Our 1.85mm to mini SMP cable assembly has a male gender on end 1 and a female on end 2. PE3C10772-6 can also be known as a 1.85mm plug to right angle mini SMP jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10772-6 RF cable has an FEP jacket of 0.105-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 100 dB. Our 1.85mm male to right angle mini SMP female cable has a maximum VSWR of 1.4:1. This PE3C10772-6 1.85mm plug to mini SMP jack cable assembly is built with PE-SR405FLJ, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to right angle mini SMP cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method. Additional dimensions, specifications, and CAD drawings for this 6-inch-long RF cable are available on our downloadable PDF datasheet. PE3C10772-6 can also be used in the other direction and will be a right angle mini SMP female to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to mini SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to mini SMP cable assembly for quick shipment worldwide. Variations of 1.85mm and mini SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to mini SMP RF cable assembly as per your requirements. |
| 2 | ||
| PE3C10774-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 1.85mm Male to SMA Male Cable 24 Inch Length Using PE-SR405FLJ Coax., Pasternack’s PE3C10774-24 1.85mm male to SMA male RF cable assembly using PE-SR405FLJ coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and an SMA cable connection on the other. Our 1.85mm to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3C10774-24 can also be known as a 1.85mm plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10774-24 RF cable has an FEP jacket of 0.105-inch diameter. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 100 dB. Our 1.85mm male to SMA male cable has a maximum VSWR of 1.4:1. This PE3C10774-24 1.85mm plug to SMA plug cable assembly is built with PE-SR405FLJ, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method and a beryllium copper body with gold over nickel plating, while the other has the solder/solder attachment method and a brass body with gold over nickel plating. Additional dimensions, specifications, and CAD drawings for this 24-inch-long RF cable are available on our downloadable PDF datasheet. PE3C10774-24 can also be used in the other direction and will be an SMA male to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to SMA cable assembly for quick shipment worldwide. Variations of 1.85mm and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to SMA RF cable assembly as per your requirements. |
| 2 | ||
| PE3C10770-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 3.5mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 1.85mm Male to 3.5mm Female Bulkhead Cable 18 Inch Length Using PE-SR405FLJ Coax., Pasternack’s PE3C10770-18 1.85mm male to 3.5mm female bulkhead RF cable assembly using PE-SR405FLJ coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to 3.5mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to 3.5mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and a 3.5mm bulkhead cable connection on the other. Our 1.85mm to 3.5mm cable assembly has a male gender on end 1 and a female on end 2. PE3C10770-18 can also be known as a 1.85mm plug to 3.5mm jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10770-18 RF cable has an FEP jacket of 0.105-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 105 degrees C. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 100 dB. Our 1.85mm male to bulkhead 3.5mm female cable has a maximum VSWR of 1.4:1. This PE3C10770-18 1.85mm plug to 3.5mm jack cable assembly is built with PE-SR405FLJ, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to 3.5mm cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method and a beryllium copper body with gold over nickel plating, while the other has the clamp/solder attachment method and a stainless steel body with passivated plating. Additional dimensions, specifications, and CAD drawings for this 18-inch-long RF cable are available on our downloadable PDF datasheet. PE3C10770-18 can also be used in the other direction and will be a 3.5mm female bulkhead to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to 3.5mm jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 3.5mm cable assembly for quick shipment worldwide. Variations of 1.85mm and 3.5mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to 3.5mm RF cable assembly as per your requirements. |
| 2 | ||
| PE3C1077 | Pasternack Enterprises | 0 | ||||
| PE3W10774 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. N Male Right Angle to N Male Right Angle Cable Using RG142 Coax. PE3W10774 is a N male right angle to N male right angle cable using RG142 coax. This Pasternack N male right angle to N male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N right angle to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10774 N male right angle to N male right angle cable assembly is constructed with RG142 coax. | 0 | |||
| PE3C10777 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMC, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. 1.85mm Male to SSMC Plug Right Angle Cable Using PE-SR405FLJ Coax., Pasternack’s PE3C10777 1.85mm male to right angle SSMC plug RF cable assembly using PE-SR405FLJ coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to SSMC plug cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to SSMC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and a right angle SSMC cable connection on the other. Our 1.85mm to SSMC cable assembly has a male gender on end 1 and a plug on end 2. PE3C10777 can also be known as a 1.85mm plug to right angle SSMC male cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10777 RF cable has an FEP jacket of 0.105-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 100 dB. Our 1.85mm male to right angle SSMC plug cable has a maximum VSWR of 1.4:1. This PE3C10777 1.85mm plug to SSMC male cable assembly is built with PE-SR405FLJ, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to right angle SSMC cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method and a beryllium copper body with gold over nickel plating, while the other has the solder/solder attachment method and a brass body with gold plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10777 can also be used in the other direction and will be a right angle SSMC plug to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to SSMC right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to SSMC cable assembly for quick shipment worldwide. Variations of 1.85mm and SSMC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to SSMC RF cable assembly as per your requirements. | 0 | |||
| PE3C10773 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BMMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. 1.85mm Male to BMMA Male Bulkhead Cable Using PE-SR405FLJ Coax., Pasternack’s PE3C10773 1.85mm male to BMMA male bulkhead RF cable assembly using PE-SR405FLJ coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to BMMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to BMMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and a BMMA bulkhead cable connection on the other. Our 1.85mm to BMMA cable assembly has a male gender on end 1 and a male on end 2. PE3C10773 can also be known as a 1.85mm plug to BMMA plug cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10773 RF cable has an FEP jacket of 0.105-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 100 dB. Our 1.85mm male to bulkhead BMMA male cable has a maximum VSWR of 1.4:1. This PE3C10773 1.85mm plug to BMMA plug cable assembly is built with PE-SR405FLJ, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to BMMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10773 can also be used in the other direction and will be a BMMA male bulkhead to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to BMMA plug bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to BMMA cable assembly for quick shipment worldwide. Variations of 1.85mm and BMMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to BMMA RF cable assembly as per your requirements. | 0 | |||
| PE3C10777-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMC, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 1.85mm Male to SSMC Plug Right Angle Cable 18 Inch Length Using PE-SR405FLJ Coax., Pasternack’s PE3C10777-18 1.85mm male to right angle SSMC plug RF cable assembly using PE-SR405FLJ coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to SSMC plug cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to SSMC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and a right angle SSMC cable connection on the other. Our 1.85mm to SSMC cable assembly has a male gender on end 1 and a plug on end 2. PE3C10777-18 can also be known as a 1.85mm plug to right angle SSMC male cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10777-18 RF cable has an FEP jacket of 0.105-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 100 dB. Our 1.85mm male to right angle SSMC plug cable has a maximum VSWR of 1.4:1. This PE3C10777-18 1.85mm plug to SSMC male cable assembly is built with PE-SR405FLJ, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to right angle SSMC cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method and a beryllium copper body with gold over nickel plating, while the other has the solder/solder attachment method and a brass body with gold plating. Additional dimensions, specifications, and CAD drawings for this 18-inch-long RF cable are available on our downloadable PDF datasheet. PE3C10777-18 can also be used in the other direction and will be a right angle SSMC plug to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to SSMC right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to SSMC cable assembly for quick shipment worldwide. Variations of 1.85mm and SSMC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to SSMC RF cable assembly as per your requirements. |
| 0 | ||
| PE3C10773-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BMMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 1.85mm Male to BMMA Male Bulkhead Cable 24 Inch Length Using PE-SR405FLJ Coax., Pasternack’s PE3C10773-24 1.85mm male to BMMA male bulkhead RF cable assembly using PE-SR405FLJ coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to BMMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to BMMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and a BMMA bulkhead cable connection on the other. Our 1.85mm to BMMA cable assembly has a male gender on end 1 and a male on end 2. PE3C10773-24 can also be known as a 1.85mm plug to BMMA plug cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10773-24 RF cable has an FEP jacket of 0.105-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 100 dB. Our 1.85mm male to bulkhead BMMA male cable has a maximum VSWR of 1.4:1. This PE3C10773-24 1.85mm plug to BMMA plug cable assembly is built with PE-SR405FLJ, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to BMMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method. Additional dimensions, specifications, and CAD drawings for this 24-inch-long RF cable are available on our downloadable PDF datasheet. PE3C10773-24 can also be used in the other direction and will be a BMMA male bulkhead to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to BMMA plug bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to BMMA cable assembly for quick shipment worldwide. Variations of 1.85mm and BMMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to BMMA RF cable assembly as per your requirements. |
| 0 | ||
![]() Vyrian | LT1077ACN8#PBF | Analog Devices Inc | Operational Amplifier, 1 Func, 230uV Offset-Max, BIPolar, PDIP8 RoHS : Compliant | 11,484 | ||
| LT1077IN8#PBF | Analog Devices Inc | Operational Amplifier, 1 Func, 450uV Offset-Max, BIPolar, PDIP8 RoHS : Compliant | 10,746 | |||
| LT1077IN8-PBF | Analog Devices Inc | 10,657 | ||||
| LT1077CN8 | Analog Devices Inc | Operational Amplifier, 1 Func, 320uV Offset-Max, BIPolar, PDIP8 RoHS : Not Compliant | 10,258 | |||
| LT1077IS8#TR | Analog Devices Inc | Operational Amplifier, 1 Func, 450uV Offset-Max, BIPolar, PDSO8 RoHS : Not Compliant | 9,545 | |||
| LT1077AIN8 | Analog Devices Inc | Operational Amplifier, 1 Func, 330uV Offset-Max, BIPolar, PDIP8 RoHS : Not Compliant | 9,373 | |||
| LT1077AIN8-PBF | Analog Devices Inc | 9,155 | ||||
| LT1077AIN8#PBF | Analog Devices Inc | Operational Amplifier, 1 Func, 330uV Offset-Max, BIPolar, PDIP8 RoHS : Compliant | 7,923 | |||
| LT1077IS8#PBF | Analog Devices Inc | Operational Amplifier, 1 Func, 450uV Offset-Max, BIPolar, PDSO8 RoHS : Compliant | 7,716 | |||
| LT1077IN8 | Analog Devices Inc | Operational Amplifier, 1 Func, 450uV Offset-Max, BIPolar, PDIP8 RoHS : Not Compliant | 7,617 | |||
| LT1077CN8-PBF | Analog Devices Inc | 7,084 | ||||
| LT1077ACN8-PBF | Analog Devices Inc | 6,771 | ||||
| LT1077ACN8 | Analog Devices Inc | Operational Amplifier, 1 Func, 230uV Offset-Max, BIPolar, PDIP8 RoHS : Not Compliant | 6,388 | |||
| LT1077CN8#PBF | Analog Devices Inc | Operational Amplifier, 1 Func, 320uV Offset-Max, BIPolar, PDIP8 RoHS : Compliant | 6,136 | |||
LT1077IS8![]() | Linear Technology | Operational Amplifier, 1 Func, 450uV Offset-Max, BIPolar, PDSO8 RoHS : Not Compliant | 644 | |||
![]() Waytek, Inc. | 110-77003 | HellermannTyton | The HellermannTyton 110-77031 EVO 7i is a professional cable tie installation tool designed for precise tensioning and flush cutting of nylon cable ties. Compatible with 1880 lb. ties (2.54.8 mm width), it features calibrated tension control with 33 settings and a single-stroke flush cut-off for consistent, safe results. Engineered with ergonomic Tension-Lock-Cut (TLC) technology, it locks tension before cutting to reduce kickback and operator fatigue. Its lightweight, durable construction and slim nose design make it ideal for high-volume automotive, electrical, and industrial cable management applications. |
| 5 | |
![]() Win Source Electronics | NCP1077STAT3G | onsemi | IC REG SWITCHING HV SMPS SOT223 RoHS : Compliant |
| 56,576 | |
| 53261-0771 | Molex | 1.25mm (.049") Pitch PicoBlade™ Header, Surface Mount, Right Angle, Lead-free, 7Circuits RoHS : Compliant |
| 15,549 | ||
LT1077IS8![]() | Linear Technology | Micropower, Single Supply, Precision Op Amp RoHS : Not Compliant |
| 525 | ||
LT1077IS8#TRPBF![]() | Linear Technology | IC OPAMP GP 230KHZ 8SO RoHS : Compliant |
| 490 | ||
LT1077IS8#PBF![]() | Linear Technology | IC OPAMP GP 230KHZ 8SO RoHS : Compliant |
| 480 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |