| Distributor | Part # | Manufacturer | Description | Price | Qty.
BuyNow |
GLYN GmbH & Co. KG | DP-1011-02A
| FTDI Chip | TFT Display 10.1 inch (1280 x 800 resolution) with | | 1
 |
PUI | A401102
| Eaton Bussmann | | | 600
|
158-A-111/02
| WECO Electrical Connectors |
RoHS : Compliant | 1 : $3.25
26 : $3.05
51 : $2.75
101 : $2.55
|
| 358
 |
1911.1102
| | | | 300
|
2011-2X40G01R-3.1-10.2-1.
| | | | 100
|
211-102
| | | | 50
|
Component Electronics, Inc | CR0402F1102T1LF
| Chip Technologies Inc | IN STOCK SHIP TODAY | 1,000 : $0.05
100 : $0.06
1 : $0.08
|
| 18,000
|
RMC1/10-2R74-1%R
| SEI Stackpole Electronics Inc | IN STOCK SHIP TODAY | 1,000 : $0.05
100 : $0.06
1 : $0.08
|
| 5,000
|
RMC1/10-220K-5%-R
| SEI Stackpole Electronics Inc | IN STOCK SHIP TODAY | 1,000 : $0.15
100 : $0.17
1 : $0.23
|
| 4,500
|
RMC1/10-28R7F-TP
| SEI Stackpole Electronics Inc | IN STOCK SHIP TODAY | | 4,240
|
RN55D1102F
| Vishay Dale | IN STOCK SHIP TODAY
RoHS : Not Compliant | 1,000 : $0.75
100 : $0.87
1 : $1.15
|
| 1,122
|
3269W-1-102G
| Bourns Inc | IN STOCK SHIP TODAY
RoHS : Not Compliant | 1,000 : $2.0
100 : $2.31
1 : $3.08
|
| 830
|
RMC1/10-232R-1%
| SEI Stackpole Electronics Inc | IN STOCK SHIP TODAY | 1,000 : $0.05
100 : $0.06
1 : $0.08
|
| 500
|
146-A-111/02
| WECO Electrical Connectors | IN STOCK SHIP TODAY | 1,000 : $0.5
100 : $0.58
1 : $0.77
|
| 300
|
MTSW-110-22-L-D-440
| Samtec Inc | IN STOCK SHIP TODAY
RoHS : Compliant | 1,000 : $1.0
100 : $1.15
1 : $1.54
|
| 96
|
0511102650
| Molex | IN STOCK SHIP TODAY
RoHS : Compliant | 1,000 : $0.25
100 : $0.29
1 : $0.38
|
| 32
|
39-31-1021
| Molex | IN STOCK SHIP TODAY
RoHS : Compliant | 1,000 : $0.25
100 : $0.29
1 : $0.38
|
| 21
|
110277-0000
| ITT Interconnect Solutions | IN STOCK SHIP TODAY | 1,000 : $2.5
100 : $2.88
1 : $3.85
|
| 21
|
1-102448-8
| TE Connectivity | IN STOCK SHIP TODAY
RoHS : Not Compliant | | 15
|
1-102321-1
| TE Connectivity | IN STOCK SHIP TODAY
RoHS : Not Compliant | 1,000 : $6.0
100 : $6.92
1 : $9.23
|
| 7
|
IPL1-102-01-F-D-RA
| Samtec Inc | IN STOCK SHIP TODAY
RoHS : Compliant | 1,000 : $2.0
100 : $2.31
1 : $3.08
|
| 3
|
ECCO | 351-1027-000
| ITT Interconnect Solutions | | | 747
|
3511027000
| ITT Interconnect Solutions | | | 747
|
351-1025-000
| ITT Interconnect Solutions | | | 744
|
3511025000
| ITT Interconnect Solutions | | | 744
|
351-1021-000
| ITT Interconnect Solutions | | | 100
|
CM111-02-0250-024
| ECCO Connectors | | | 83
|
SM111-02-0250-001
| ECCO Connectors | | | 68
|
CM111-02-0250-048
| ECCO Connectors | | | 41
|
CM111-02-1000-024
| ECCO Connectors | | | 22
|
CM111-02-1000-036
| ECCO Connectors | | | 11
|
CM111-02-1000-048
| ECCO Connectors | | | 11
|
CM111-02-0500-012
| ECCO Connectors | | | 5
|
CM111-02-0500-024
| ECCO Connectors | | | 2
|
CM111-02-0500-036
| ECCO Connectors | | | 1
|
CM111-02-0500-048
| ECCO Connectors | | | 1
|
Pasternack Enterprises US | PE36110-24
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MC-Card, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 24 inches. SMA Male to MC-Card Plug Cable 24 Inch Length Using RG178 Coax., Radio frequency assembly SMA male to MC-Card plug cable 24 inch length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to MC-Card plug cable 24 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to MC-Card cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and MC-Card cable connection on the other. Our SMA to MC-Card cable assemblies have a male gender on end 1 and plug on end 2. This SMA to MC-Card cable is a male to plug coax assembly, PE36110-24, can also be known as a SMA plug to MC-Card male cable assembly and will be shipped same-day as it is purchased. SMA plug to MC-Card male cable assembly PE36110-24 is built with RG178 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to MC-Card cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to MC-Card plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE36110-24 can also be used in the other direction and will be MC-Card plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to MC-Card male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to MC-Card cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to MC-Card plug cable 24 inch length using RG178 coax. | 1 : $77.09
25 : $73.24
50 : $69.38
100 : $66.3
|
| 81
|
PE3CA1102-6
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Straight Cut Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: PE-034SR, RF Cable Type: PE-034SR, RF Cable Impedance: 50 Ohm, Length: 6 inches. Pigtail Test Probe Cable SMA Female to Straight Cut Lead 6 Inch Length Using PE-034SR Coax, RoHS., Radio frequency assembly pigtail test probe cable SMA female to straight cut lead 6 inch length using PE-034SR coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Pigtail test probe cable SMA female to straight cut lead 6 inch length using PE-034SR coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to straight cut lead cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and straight cut lead cable connection on the other. Our SMA to straight cut lead cable assemblies have a female gender on end 1 and sexless on end 2. This SMA to straight cut lead cable is a female to sexless coax assembly, PE3CA1102-6, can also be known as a SMA jack to straight cut lead sexless cable assembly and will be shipped same-day as it is purchased. SMA jack to straight cut lead sexless cable assembly PE3CA1102-6 is built with PE-034SR which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to straight cut lead cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency SMA female to straight cut lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3CA1102-6 can also be used in the other direction and will be straight cut lead sexless to SMA female cable assembly if the opposite connectivity is required. SMA jack to straight cut lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to straight cut lead cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this pigtail test probe cable SMA female to straight cut lead 6 inch length using PE-034SR coax, RoHS. | 1 : $81.39
25 : $77.32
50 : $73.25
100 : $70.0
|
| 11
|
PE71S1102
| Pasternack Enterprises | Key Specifications, Connector Series: SMA, Connector Gender: Female, Switch Design: Reflective, Minimum Frequency: DC, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Maximum Input Power: 10 Watts, Maximum Input VSWR: 2:1, Maximum Insertion Loss: 2.3 dB, Minimum Isolation: 23 dB. Reflective SPDT GaN High Power PIN Diode Switch Operating from DC to 18 GHz Up to 10 Watts (+40 dBm), 50ns and SMA. PE71S1102 PIN diode switch from Pasternack is a Reflective design. Our RF Reflective PIN diode switch uses SMA connectors at 50 Ohm. This SMA PIN diode Reflective switch has a minimum frequency of DC and a maximum frequency of 18 GHz. The Pasternack PIN diode Reflective RF switch is rated at a switching speed of 100 ns and a maximum input power of 10 Watts (+40 dBm ). Insertion loss maximum of this SMA Reflective switch is 2.3 dB with an isolation minimum of 23 dB. Reflective PIN diode radio frequency switch PE71S1102 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our Reflective SMA coaxial PIN diode switch can ship worldwide the same day that it is bought as with our other available RF parts. | 1 : $5,300.0
5 : $5,088.0
10 : $4,876.0
25 : $4,664.0
|
| 6
|
PE1V11023
| Pasternack Enterprises | | 1 : $84.59
25 : $80.36
50 : $76.13
100 : $72.75
|
| 5
|
PEANOM1102
| Pasternack Enterprises | Key Specifications. Antenna Type Mobile Polarization Vertical Connector 1 Polarity Standard Connector Series SMA Connector Gender Male Impedance 50 Ohm. 4 Cellular, 1 GPS Combination Antenna4 SMA, 1 SMA Connector Black. The Pasternack PEANOM1102 is a 5-in-1 combination antenna designed for public safety, emergency services, mobile basestations, autonomous vehicles, fleet management, smart cities, smart utilities, or industrial IoT applications. This verticallypolarized omnidirectional antenna has SMA male connectors with 17 feet cable leads. Our high-quality mobile antenna with5 ports has a typical input VSWR of 2:1. The IoT combination antenna from Pasternack has an overall length of 7 inches, width of 7 inches, and weight of 4 lbs. ThisPEANOM1102 mobile antenna is IP69K-rated and has a black-colored radome made of UV-stabilized ABS. The 4 cellular, 1GPS combination antenna has an impedance of 50 Ohms and a maximum input power of 10 Watts. Our vertically polarized mobile antenna can operate at temperatures ranging from -40 to 70 degrees C. This MIMO-capableIoT antenna features four 4G/5G, and one L1/G1 GPS band elements in one radome. Emergency services, first responders,and fleets can rely on our 5-in-1 combination antenna to maintain a secure link between vehicles and dispatch centers. | 1 : $492.99
10 : $473.27
25 : $453.55
100 : $433.83
|
| 1
|
PE3C11025
| Pasternack Enterprises | | | 0
|
PE3C11021
| Pasternack Enterprises | | | 0
|
PE3C11102
| Pasternack Enterprises | | | 0
|
PE3C1110-200CM
| Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. N Female Bulkhead to TNC Male Low Loss Cable 200 cm Length Using PE-P142LL Coax, RoHS., Radio frequency assembly N female bulkhead to TNC male low loss cable 200 cm length using PE-P142LL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N female bulkhead to TNC male low loss cable 200 cm length using PE-P142LL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N bulkhead cable connection on one end and TNC cable connection on the other. Our low loss N type to TNC cable assemblies have a female gender on end 1 and male on end 2. This type N to TNC cable is a female to male coax assembly, PE3C1110-200CM, can also be known as a low loss N type jack to TNC plug cable assembly and will be shipped same-day as it is purchased. Type N jack to TNC plug cable assembly PE3C1110-200CM is built with PE-P142LL which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency type N female bulkhead to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1110-200CM can also be used in the other direction and will be TNC male to N type female bulkhead cable assembly if the opposite connectivity is required. Low loss type N jack bulkhead to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female bulkhead to TNC male low loss cable 200 cm length using PE-P142LL coax, RoHS. | 1 : $460.99
25 : $437.94
50 : $414.89
|
| 0
|
PE3W11022
| Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm. | | 0
|
PE3C1110-24
| Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 24 inches. N Female Bulkhead to TNC Male Low Loss Cable 24 Inch Length Using PE-P142LL Coax, RoHS., Radio frequency assembly N female bulkhead to TNC male low loss cable 24 inch length using PE-P142LL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N female bulkhead to TNC male low loss cable 24 inch length using PE-P142LL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N bulkhead cable connection on one end and TNC cable connection on the other. Our low loss type N to TNC cable assemblies have a female gender on end 1 and male on end 2. This type N to TNC cable is a female to male coax assembly, PE3C1110-24, can also be known as a low loss type N jack to TNC plug cable assembly and will be shipped same-day as it is purchased. N type jack to TNC plug cable assembly PE3C1110-24 is built with PE-P142LL which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency type N female bulkhead to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1110-24 can also be used in the other direction and will be TNC male to N type female bulkhead cable assembly if the opposite connectivity is required. Low loss N type jack bulkhead to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female bulkhead to TNC male low loss cable 24 inch length using PE-P142LL coax, RoHS. | 1 : $269.99
25 : $256.49
50 : $242.99
|
| 0
|
PE3W11025
| Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/2SFHC, RF Cable Type: 1/2" Superflexible, RF Cable Impedance: 50 Ohm. | | 0
|
PE3W11026
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm. | | 0
|
PE20DV1102
| Pasternack Enterprises | Key Specifications, Connector Series In: SMA, Connector Gender In: Female, Minimum Frequency: 1 GHz, Maximum Frequency: 2 GHz, Number of Output Ports: 3 Port, Impedance: 50 Ohm, Maximum Input Power: 30 Watt. 3 Way SMA Power Divider From 1 GHz to 2 GHz Rated at 30 Watts., The PE20DV1102 3-way waveguide power divider (also known as a coaxial power splitter) is rated for a minimum frequency of 1 GHz and a maximum frequency of 2 GHz. This Pasternack 3 port power divider/coaxial splitter has a 50 Ohm impedance and a maximum input power of 30 kW. Our coaxial RF splitter/divider has a female input and 3 female output ports. This RF power divider allows the splitting of a single signal into multiple signals with equal magnitude and phase. Our 3-way waveguide power divider has 300 kW of peak input power. Pasternack’s PE20DV1102 coax connectorized power splitter has an aluminum housing and can handle maximum reverse power up to 2 Watts. This threaded connector waveguide power divider has a 0.3 dB maximum amplitude balance. Our 50 Ohm radio frequency power divider is built to operate across a temperature range of -40 deg C to 85 deg C. This 2 GHz waveguide power divider has 4 degrees and 5 degrees typical and maximum phase balance, respectively. Additional power divider specifications and dimensions can be found on its PDF specification datasheet and CAD drawings above. This 3-way RF power divider from Pasternack has a maximum insertion loss of 0.6 dB. The maximum input VSWR of this splitter/divider is 1.3:1 and the minimum isolation is 20 dB. The PE20DV1102 waveguide power divider from Pasternack is ideal for test and measurement, military communications, commercial communications, wireless communications and satcom applications. Our 3 port waveguide power divider is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This 3-way coaxial RF power divider splitter can be bought and shipped worldwide the same-day as with Pasternack's other in-stock RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect waveguide power divider for your requirements. | 1 : $323.99
10 : $317.51
25 : $311.03
100 : $304.55
|
| 0
|
PE3C11022
| Pasternack Enterprises | | | 0
|
Venkel Ltd. | C1206C0G101-102JNP
 | VENKEL LTD | Chip Capacitor;1206;C0G;100V;1000pF;�5%
RoHS : Compliant | | 84,000
|
C0805C0G631-102GNE
| VENKEL LTD | HV Chip Capacitor;0805;C0G;630V;1000pF;�2%
RoHS : Compliant | | 0
|
C1210X7R251-102KNE
 | VENKEL LTD | HV Chip Capacitor;1210;X7R;250V;1000pF;�10%
RoHS : Compliant | | 0
|
C1825C0G501-102JNE
| VENKEL LTD | HV Chip Capacitor;1825;C0G;500V;1000pF;�5%
RoHS : Compliant | | 0
|
MELFC0102-YZ-1102BT
| VENKEL LTD | MELF Coated Thin Film CR;0102;1/3W;�15PPM;11K;�0.1%
RoHS : Compliant | | 0
|
MELFM0207-XE-1102DT
| VENKEL LTD | MELF Molded Thin Film CR;0207;1W;�25PPM;11K;�0.5%
RoHS : Not Compliant | | 0
|
UPTF0603-16W-P-1102BT
| VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�5PPM;11K;�0.1%
RoHS : Compliant | | 0
|
UPTF2010-2W-N-1102AT
| VENKEL LTD | Ultra Precision Thin Film CR;2010;1/2W;�10PPM;11K;�0.05%
RoHS : Compliant | | 0
|
HPTF0805-RN-1102DT
| VENKEL LTD | High Power Thin Film CR;0805;1/8W;�10PPM;11K;�0.5%
RoHS : Compliant | | 0
|
HPTF1206-UC-1102BT
| VENKEL LTD | High Power Thin Film CR;1206;1/3W;�50PPM;11K;�0.1%
RoHS : Compliant | | 0
|
MELFC0102-RE-1102CT
| VENKEL LTD | MELF Coated Thin Film CR;0102;1/8W;�25PPM;11K;�0.25%
RoHS : Compliant | | 0
|
MELFC0102-UE-1102FT
| VENKEL LTD | MELF Coated Thin Film CR;0102;1/5W;�25PPM;11K;�1%
RoHS : Compliant | | 0
|
MELFC0204-TC-1102DT
| VENKEL LTD | MELF Coated Thin Film CR;0204;1/4W;�50PPM;11K;�0.5%
RoHS : Compliant | | 0
|
MELFC0204-ZC-1102BT
| VENKEL LTD | MELF Coated Thin Film CR;0204;2/5W;�50PPM;11K;�0.1%
RoHS : Compliant | | 0
|
MELFC0207-XN-1102BT
| VENKEL LTD | MELF Coated Thin Film CR;0207;1W;�10PPM;11K;�0.1%
RoHS : Compliant | | 0
|
Wuhan P&S | NB7NPQ1102MMTTWG
| onsemi | 3.3 V USB 3.1 GEN-2 10 GB
RoHS : Compliant | 1 : $2.62
100 : $1.67
500 : $1.38
1,000 : $1.27
|
| 6,000
|
English ▼ 
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand