| Electronic Components Datasheet Search |
|
11116-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() DigiKey | 99M0111-16-45 | TE Connectivity | HK-UP DLWALLSTRND 16AWG Y/B FOOT RoHS : Compliant |
| 3,247 | |
| 99M0111-16-2L | TE Connectivity | HK-UP DL WALLSTRND16AWG RED FOOT RoHS : Compliant |
| 992 | ||
| 2163011116 | Molex | MX150 F-S 600MM 16 AWG LEADS BK RoHS : Compliant |
| 857 | ||
| T38111160 | Curtis Industries | CONN BARRIER STRP 16CIRC 0.375" |
| 612 | ||
| 1-111626-9 | TE Connectivity | CONN RCPT 20POS IDC 28AWG GOLD RoHS : Compliant |
| 403 | ||
| 1-111626-8 | TE Connectivity | CONN RCPT 14POS IDC 28AWG GOLD RoHS : Compliant |
| 366 | ||
| HTSW-111-16-T-S-RA | JRH ELECTRONICS | PIN HEADER, RIGHT ANGLE, BOARD-T |
| 129 | ||
| 622-300-1-1-11-6-20 | NOSHOK Inc | Front Flush Pressure Transmitter |
| 19 | ||
| 5991111616 | Cinch Connectivity Solutions | TOOL HAND CRIMPER 16-18AWG SIDE |
| 16 | ||
| 11116 | Keystone Electronics Corp | TERM TURRET SLOTTED L=9.91MM TIN RoHS : Compliant |
| 14 | ||
| PT40-100PSIG-1-1-11-16-CC | NOSHOK Inc | High Accuracy Fixed Range Pressu |
| 6 | ||
| 111-16-P | Carling Technologies | SWITCH PUSH BUTTON RoHS : Compliant |
| 5 | ||
| 20011116-02 | WALDOM | Wire & Cable, Cable Assemblies |
| 1 | ||
| LELHK111-1-62-30.0-U-01-V | Sensata Circuit Breakers | CIR BRKR MAG-HYDR RoHS : Compliant |
| 1 | ||
| 11116 | Lapp Group | NPT-1" PG-16 ADAPTER |
| 0 | ||
![]() Avnet Americas | 1-971111-6-INCH | TE Connectivity | Cable Ribbon 16Conductor 28AWG 30.48m Tin Plated Copper Gray 30V - Bulk (Alt: 1-971111-6-INCH) RoHS : Compliant |
| 828 | |
| M85049/111-16KN06-6D | Amphenol Corporation | - Bulk (Alt: A8504911116KN066D) RoHS : Compliant |
| 0 | ||
| M85049/111-16KN06-6D | Glenair Inc | RFI/EMI Shield Sock Shrink Boot Adaptor for AS34001/AS50151 Series/MIL-DTL-26482 Series II Circular - Bulk (Alt: M85049/111-16KN06-6D) RoHS : Not Compliant |
| 0 | ||
| M85049/111-16KN08-6 | Glenair Inc | RFI/EMI Shield Sock Shrink Boot Adaptor for AS34001/AS50151 Series/MIL-DTL-26482 Series II Circular - Bulk (Alt: M85049/111-16KN08-6) RoHS : Not Compliant |
| 0 | ||
| M85049/111-16KN08-6 | Amphenol Corporation | BACKSHELL PRE-SHLD ADAPTR 90 DEG NICKEL SHLD - Bulk (Alt: A8504911116KN086) RoHS : Compliant |
| 0 | ||
| M85049/111-16KW07-6D | Amphenol Corporation | - Bulk (Alt: A8504911116KW076D) RoHS : Not Compliant |
| 0 | ||
| M85049/111-16KW07-6D | Glenair Inc | RFI/EMI Shield Sock Shrink Boot Adaptor for AS34001/AS50151 Series/MIL-DTL-26482 Series II Circular - Bulk (Alt: M85049/111-16KW07-6D) RoHS : Not Compliant |
| 0 | ||
| M85049/111-16TN07-6 | Glenair Inc | RFI/EMI Shield Sock Shrink Boot Adaptor for AS34001/AS50151 Series/MIL-DTL-26482 Series II Circular - Bulk (Alt: M85049/111-16TN07-6) RoHS : Not Compliant |
| 0 | ||
| M85049/111-16TN07-6 | Amphenol Corporation | BACKSHELL PRE-SHLD ADAPTR 90 DEG TIN SHLD - Bulk (Alt: A8504911116TN076) RoHS : Compliant |
| 0 | ||
| M85049/111-16TW08-6 | Amphenol Corporation | BACKSHELL PRE-SHLD ADAPTR 90 DEG TIN SHLD - Bulk (Alt: A8504911116TW086) RoHS : Not Compliant |
| 0 | ||
| M85049/111-16TW08-6 | Glenair Inc | RFI/EMI Shield Sock Shrink Boot Adaptor for AS34001/AS50151 Series/MIL-DTL-26482 Series II Circular - Bulk (Alt: M85049/111-16TW08-6) RoHS : Not Compliant |
| 0 | ||
| FW5A11116S03 | TE Connectivity | FW5A11116S03=FULL SIZE 5 AMP RELAY - Bulk (Alt: 6-1617780-7) RoHS : Not Compliant |
| 0 | ||
| 82A0111-16-F868-9 | TE Connectivity | - Bag (Alt: 836511-000) RoHS : Compliant |
| 0 | ||
| 99M0111-16-2L | TE Connectivity | - Tape and Reel (Alt: 6632933001) RoHS : Compliant |
| 0 | ||
| 99M0111-16-8 | TE Connectivity | - Tape and Reel (Alt: 8421293001) RoHS : Compliant |
| 0 | ||
![]() Newark | 200241-1116 | Molex | WTB CONN, HEADER, 6POS, 1ROW, 5.7MM; RoHS : Compliant |
| 782 | |
| 44A0111-16-9 | TE Connectivity | WIRE, 16AWG, WHITE, 100M; RoHS : Compliant |
| 43 | ||
| 622-300-1-1-11-6-20 | NOSHOK Inc | EXPLOSION-PROOF PRESSURE TRANSMITTER; RoHS : Compliant |
| 19 | ||
| M85049/11-116W | Amphenol PCD | STRAIN RELIEF CLAMP, SIZE 12/14, ALUM; Connector Shell Size:12 / 14; Cable Diameter Max:11.1mm; Strain Relief Material:Aluminum Alloy; Product Range:- RoHS Compliant: No RoHS : Not Compliant |
| 18 | ||
| 622-5000-1-1-11-6 | NOSHOK Inc | EXPLOSION-PROOF PRESSURE TRANSMITTER; RoHS : Compliant |
| 7 | ||
| 99M0111-16-2L | TE Connectivity | WIRE, 16AWG, PINK, 100M; RoHS : Compliant |
| 5 | ||
| LELHK111-1-62-50.0-01-V | Sensata Circuit Breakers | HYDRAULIC CKT PROTECTOR, 3P, 50A, 1.25KV; RoHS : Compliant |
| 5 | ||
| IELHK111-1-61F-50.0-A-01-V | Sensata Circuit Breakers | HYDRAULIC CKT PROTECTOR, 3P, 50A, 3.75KV; RoHS : Compliant |
| 5 | ||
| IELHK111-1-61F-15.0-AD-01-V | Sensata Circuit Breakers | HYDRAULIC CKT PROTECTOR, 3P, 15A, 3.75KV; RoHS : Compliant |
| 5 | ||
| IELHK111-1-62F-70.0-ABK-01-V | Sensata Circuit Breakers | HYDRAULIC CKT PROTECTOR, 3P, 70A, 3.75KV; RoHS : Compliant |
| 5 | ||
| IELHK111-1-62F-35.0-ABE-01-V | Sensata Circuit Breakers | HYDRAULIC CKT PROTECTOR, 3P, 35A, 3.75KV; RoHS : Compliant |
| 5 | ||
| LELHK111-1-62-5.00-U-01-V | Sensata Circuit Breakers | HYDRAULIC CKT PROTECTOR, 3P, 5A, 1.25KV; RoHS : Compliant |
| 3 | ||
| IELHK111-1-62F-80.0-AB-01-V | Sensata Circuit Breakers | HYDRAULIC CKT PROTECTOR, 3P, 80A, 3.75KV; RoHS : Compliant |
| 3 | ||
| GTB20G-24111160ZZZ | SICK AG | PHOTOELECTRIC SENSOR, 3 M, PUSH PULL; RoHS : Compliant |
| 1 | ||
| IELHK111-1-61F-70.0-A-01-V | Sensata Circuit Breakers | HYDRAULIC CKT PROTECTOR, 3P, 70A, 3.75KV; RoHS : Compliant |
| 1 | ||
![]() Analog Devices Inc | MAX11116AUT+T | Analog Devices Inc | 2.2V to 3.6V, 8-Bit, 3MSPS SAR RoHS : Compliant |
| 7,702 | |
| MAX11116AUT+ | Analog Devices Inc | 2.2V to 3.6V, 8-Bit, 3MSPS SAR RoHS : Compliant | 0 | |||
![]() RS | 111-16-73 (110-06862000 | 111-16-73 | 1111673) | Carling Technologies | SWITCH, TOGGLE, SPST, ON-NONE-OFF, STANDARD TOGGLE, NON-ILLUM,6A,125VAC, WIRE LEADS |
| 1,687 | |
| 30350-5002HB (00051111617885) | 3M | LOW PROFILE HEADER, .100. X .100. STRAIGHT AND RIGHT ANGLE, FOUR-WALL |
| 1,568 | ||
| 8432-11B1-RK-TP (00051111663073) | 3M | CHIP CARRIER SOCKETS, 8400 SERIES, LOW PROFILE, FOUR-ROW, THROUGH-HOLE |
| 432 | ||
| 111-16-P (114-09560000 | 111-16-P | 11116P) | Carling Technologies | SWITCH, PANEL MOUNT, 6 A AT 125 VAC, SP, WIRE LEAD, 50000 CYCLES, 25000 CYCLES |
| 340 | ||
| 82050-6000RB (51111653586) | 3M | RIGHT ANGLE CABLE MOUNT IDC CONNECTOR SOCKET, 50 WAY, 2 ROW, 1.27MM PITCH |
| 263 | ||
| N3314-6002RB (51111650639) | 3M | HEADER, PCB PLUG,14 CONT, SOLDER TAIL, THRU-HOLE,3000 SERIES, FOUR-WALL, STRAIGHT,2A |
| 100 | ||
| N3431-6302RB (51111627761) | 3M | HEADER LATCH-EJECTOR 4-WALL 0.1IN COPPERALLOY 1.75A HIGHTEMPPLASTIC STR 34CNTS |
| 35 | ||
| 111-16-57 (110-00008346|111-16-57|1111657) | Carling Technologies | SWITCH;TOGGLE;HEAVY ACTION;SPST;110/216 SERIES |
| 12 | ||
| N2550-6002-RB (51111627402) | 3M | HEADER HIGH TEMPERATURE PCB PLUG 50 CONT SOLDER TAIL THRU-HOLE 2500 SERIES 2A |
| 10 | ||
| 111-16-23 (110-06754000|111-16-23|1111623) | Carling Technologies | SWITCH;TOGGLE;HEAVY ACTION;SPST;110/216 SERIES |
| 10 | ||
| 1MG26-LFW0-00C-200 (00051111655641) | 3M | SHRUNK DELTA RIBBON (SDR) CABLE ASSEMBLY, 1MG26-LFW0-00C-XXX SERIES |
| 9 | ||
| 11116 | ELESA USA | HCV.127-E-ST-NC-M12, ELECTRICAL LEVEL INDICATORS, OIL ELECTRICAL LEVEL INDICATO |
| 0 | ||
| 11116 | Keystone Electronics Corp | PTFE INSULATED FORK TERMINAL RoHS : Compliant |
| 0 | ||
| 11116 | Lapp Group | NPT-1" PG-16 ADAPTER |
| 0 | ||
| 11116 | Marinco Electrical Group | DUAL TRUMP.AIR HORN BULK DUAL |
| 0 | ||
![]() Bisco Industries | 1111641 | Unbrako Group | 2,050 | |||
| 1111608 | Unbrako Group | 1,975 | ||||
| 1111689 | Unbrako Group | 825 | ||||
| 1111623 | Unbrako Group | 375 | ||||
| MS35311-116 | MS HEX CAP SCREWS | 206 | ||||
| 81-11-160-20 | Southco | 138 | ||||
| 3/8-24X1 11/16 G8 ZC | HEX HEAD CAP SCREWS | 52 | ||||
| 5/16-24X1 11/16 SS PS | HEX HEAD CAP SCREWS | 35 | ||||
| NAS1611-116A | NAS O-RINGS | 15 | ||||
| 1-111626-9 | TE Connectivity | RoHS : Compliant | 2 | |||
| 1-111626-7 | TE Connectivity | RoHS : Compliant | 1 | |||
![]() Rochester Electronics | W48C111-16H | Cypress Semiconductor | Processor Specific Clock Generator, 100MHz, CMOS, PDSO28 RoHS : Not Compliant |
| 4,197 | |
W48C111-16HT![]() | Cypress Semiconductor | Processor Specific Clock Generator, 100MHz, CMOS, PDSO28 RoHS : Not Compliant |
| 1,000 | ||
![]() Sager | 11116 | Keystone Electronics Corp | Circuit Board Hardware - PCB .212 x .390 Fork Turret .148 Dia RoHS : Compliant |
| 0 | |
| IAG1111-1-61-10.0-AQ-91 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| 82-6151.1116 | EAO AG | Pushbutton Switches 82-6151.1116.Illuminated pushbutton.momentary.22 mm.stainless steel.flush/flat.ring.red.230 V.soldering terminal RoHS : Compliant |
| 0 | ||
| 82A0111-16-F868-9 | TE Connectivity | Hook-up Wire 82A0111-16-F868-9 PRICE PER FOOT RoHS : Compliant |
| 0 | ||
| APL111-1-69-153-AM | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| IUG111-1-62-30.0-Q-01 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| IUGH111-1-63-10.0-91 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| IULDHK111-1-66-15.0-C-91 | Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag |
| 0 | ||
| IULDHK1111-1-62-60.0-K-01 | Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag |
| 0 | ||
| IULH111-1-62-15.0-01-U | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| IULH111-1-63-30.0-E-01 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| IULHK111-1-61-60.0-01 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| IULHK111-1-61F-40.0-01 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| IULHK111-1-61F-6.00-E-01 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| IULHK111-1-62-30.0-E-01 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
![]() TME | 0011116 | Lapp Group | Wire; ÖLFLEX® 191; 7G1mm2; unshielded; 300V,500V; Cu; stranded RoHS : Compliant |
| 111 | |
| KD7 00111161121 | LUMEL SA | Data logger; DC voltage,DC current,resistance,temperature |
| 0 | ||
| KD7 44111161021 | LUMEL SA | Data logger; DC voltage,DC current,resistance,temperature |
| 0 | ||
| KD7 00111161118 | LUMEL SA | Data logger; DC voltage,DC current,resistance,temperature |
| 0 | ||
| KD7 44111161018 | LUMEL SA | Data logger; DC voltage,DC current,resistance,temperature |
| 0 | ||
| SKU 2111116 | Phoenix Contact | LED lamp; E14; white warm; 220÷240VAC; 600lm; P: 6.5W; 180°; 3000K |
| 0 | ||
| SDD111116L | Schneider Electric | Two-way switch; 250VAC; IP20; plaster embedded,in mounting box |
| 0 | ||
| SDD111166 | Schneider Electric | Two-way switch; 250VAC; IP20; plaster embedded,in mounting box |
| 0 | ||
| KD7 00111161028 | LUMEL SA | Data logger; DC voltage,DC current,resistance,temperature |
| 0 | ||
| KD7 11111161020 | LUMEL SA | Data logger; DC voltage,DC current,resistance,temperature |
| 0 | ||
| KD7 11111161021 | LUMEL SA | Data logger; DC voltage,DC current,resistance,temperature |
| 0 | ||
| SDD111116 | Schneider Electric | Two-way switch; 250VAC; IP20; plaster embedded,in mounting box |
| 0 | ||
| YK1111633000G | Amphenol Anytek | Connector: terminal block; YK; 20A; 300V; for panel mounting; 11mm |
| 0 | ||
| SDD111162 | Schneider Electric | Switch; Poles: 2; 250VAC; IP20; plaster embedded,in mounting box |
| 0 | ||
| KD7 00111161111 | LUMEL SA | Data logger; DC voltage,DC current,resistance,temperature |
| 0 | ||
![]() ComSIT USA | 750811116 | Wurth Electronics Midcom | AVAILABLE EU | 19 | ||
![]() ComSIT USA | W48C11116H | Cypress Semiconductor | FREQUENCY GENERATOR FOR INTEGRATED CORE LOGIC Processor Specific Clock Generator, 100MHz, CMOS, PDSO28 RoHS : Not Compliant | 45 | ||
![]() Interstate Connecting Components | M85049/11-116N | Amphenol PCD | Backshell Env 26482 SII/83723 SIII/5015 |
| 10 | |
| M85049/111-16KN06-6D | Amphenol PCD | 38999 SI/II Backshell Pre-Shield ENP |
| 0 | ||
| M85049/111-16KN06-6D | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S RoHS : Compliant | 0 | |||
| M85049/111-16KN08-6 | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S RoHS : Compliant | 0 | |||
| M85049/111-16KN08-6 | Amphenol PCD | 38999 SI/II Backshell Pre-Shield ENP |
| 0 | ||
| M85049/111-16KW07-6D | Amphenol PCD | 38999 SI/II Backshell Pre-Shield ENP |
| 0 | ||
| M85049/111-16KW07-6D | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S RoHS : Not Compliant | 0 | |||
| M85049/111-16TN07-6 | Amphenol PCD | 38999 SI/II Backshell Pre-Shield ENP |
| 0 | ||
| M85049/111-16TN07-6 | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S RoHS : Compliant | 0 | |||
| M85049/111-16TW08-6 | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S RoHS : Not Compliant | 0 | |||
| M85049/111-16TW08-6 | Amphenol PCD | 38999 SI/II Backshell Pre-Shield ENP |
| 0 | ||
| 99M0111-16-8 | TE Connectivity | RoHS : Compliant |
| 0 | ||
| M85049/11-116N | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S |
| 0 | ||
| M85049/111-16TZ07-6D | Amphenol PCD | M85049111-16TZ07-6D | 0 | |||
| M85049/111-16TZ07-6D | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S RoHS : Compliant | 0 | |||
![]() NexGen Digital | 110-A-111/16 | WECO Electrical Connectors | 1,000 | |||
![]() PEI Genesis | M85049/111-16KN06-6D | Amphenol PCD |
| 0 | ||
| M85049/111-16KN08-6 | Amphenol PCD |
| 0 | |||
| M85049/111-16KW07-6D | Amphenol PCD |
| 0 | |||
| M85049/111-16TN07-6 | Amphenol PCD |
| 0 | |||
| M85049/111-16TW08-6 | Amphenol PCD |
| 0 | |||
| M85049/11-116N | Amphenol PCD |
| 0 | |||
| M85049/11-116N | SOURIAU-SUNBANK |
| 0 | |||
| M85049/111-16TZ07-6D | Amphenol PCD |
| 0 | |||
| 599-11-11-611 | Cinch Connectivity Solutions |
| 0 | |||
| 599-11-11-622 | Cinch Connectivity Solutions |
| 0 | |||
| M85049/111-16KN04-6 | Amphenol PCD |
| 0 | |||
| M85049/111-16KW05-6 | Amphenol PCD |
| 0 | |||
| M85049/111-16TW04-6 | Amphenol PCD |
| 0 | |||
| 599-11-11-612 | Cinch Connectivity Solutions |
| 0 | |||
| M85049/111-16KN07-6 | Amphenol PCD |
| 0 | |||
![]() Powell Electronics | TSW-111-16-S-D | Samtec Inc | Classic PCB Header Strips, 0.100" pitch RoHS : Compliant |
| 277 | |
| 1-111626-9 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 244 | ||
| TSW-111-16-L-S-RA | Samtec Inc | Classic PCB Header Strips, 0.100" pitch RoHS : Compliant |
| 153 | ||
| HTSW-111-16-T-S-RA | Samtec Inc | High Temperature PCB Header Strips, 0.10 RoHS : Compliant |
| 129 | ||
| M85049/111-16KN06-6D | Glenair Inc | ACCESSORIES - SHRINK BOOT ADAPTERS RoHS : Compliant |
| 24 | ||
| M85049/111-16KW07-6D | Glenair Inc | ACCESSORIES - SHRINK BOOT ADAPTERS RoHS : Not Compliant |
| 24 | ||
| M85049/111-16TW08-6 | Glenair Inc | ACCESSORIES - SHRINK BOOT ADAPTERS RoHS : Not Compliant |
| 23 | ||
| M85049/111-16KN04-6 | Glenair Inc | ACCESSORIES - SHRINK BOOT ADAPTERS RoHS : Compliant |
| 22 | ||
| M85049/111-16TN07-6 | Glenair Inc | ACCESSORIES - SHRINK BOOT ADAPTERS RoHS : Compliant |
| 20 | ||
| M85049/111-16KN08-6 | Glenair Inc | ACCESSORIES - SHRINK BOOT ADAPTERS RoHS : Compliant |
| 17 | ||
| M85049/111-16TZ07-6D | Glenair Inc | ACCESSORIES - SHRINK BOOT ADAPTERS RoHS : Compliant |
| 15 | ||
| M85049/111-16KW05-6 | Glenair Inc | ACCESSORIES - SHRINK BOOT ADAPTERS RoHS : Not Compliant |
| 15 | ||
| RM332-011-111-6000 | AirBorn a molex company | Solder Cup Cable Connector RoHS : Compliant |
| 8 | ||
| 5991111616 | ModICE | SHS Harness Connector Hand Crimp Tool | |
| 5 | ||
| M85049/11-116N | Glenair Inc | ACCESSORIES - ENVIRONMENTAL ADAPTER |
| 1 | ||
![]() Richardson RFPD | SI5332HD11116-GM2R | Skyworks Solutions Inc | Clock Generator 10MHz to 250MHz-IN 200MHz-OUT 40-P RoHS : Compliant | 0 | ||
| 55PC2111-16-9-9 | TE Connectivity | High Performance Cable Single RoHS : Compliant |
| 0 | ||
| 1-111626-0 | TE Connectivity | Conn IDCConnector F 44 POS 2mm IDT RA Side EntryCa RoHS : Not Compliant |
| 0 | ||
| SI5332HD11116-GM2 | Skyworks Solutions Inc | Clock Generator 10MHz to 250MHz-IN 200MHz-OUT 40-P RoHS : Compliant | 0 | |||
![]() Chip 1 Exchange | 44A0111-16-9CK0001 | TE Connectivity | INSTOCK | 25,979 | ||
| ASP-111168-03 | Samtec Inc | INSTOCK | 23,465 | |||
| 44A0111-16-4CK0001 | TE Connectivity | INSTOCK | 9,100 | |||
| 1-111623-8 | TE Connectivity | INSTOCK RoHS : Compliant | 3,497 | |||
| 1-111626-8 | TE Connectivity | INSTOCK RoHS : Compliant | 1,875 | |||
| 390-0211-116-440 | INSTOCK | 690 | ||||
| BY1111600 | General Electric Company | INSTOCK | 325 | |||
| 205-111-1-66-5A-153-A | INSTOCK | 1 | ||||
| 205-111-1-61-4A-153-H | INSTOCK | 1 | ||||
![]() Avnet Abacus | 1011116 | Phoenix Contact | MC 15 5G35 P14 THRR44 MC155G35P14THRR44 (Alt: 1011116) RoHS : Compliant | 0 | ||
| 1-111626-9 | TE Connectivity | Conn IDC Connector F 20 POS 2mm IDT RA Cable Mount (Alt: 1-111626-9) RoHS : Compliant | 0 | |||
| 1-111626-9 | TE Connectivity | Conn IDC Connector F 20 POS 2mm IDT RA Cable Mount (Alt: 1-111626-9) RoHS : Compliant | 0 | |||
| 2163011116 | Molex | (Alt: 2163011116) RoHS : Compliant | 0 | |||
| 5991111616 | Bel Fuse | Hand Crimp Tool for 4250000873 18AWG to 16AWG Terminal (Alt: 5991111616) RoHS : Not Compliant | 0 | |||
| 1-111626-8 | TE Connectivity | Conn IDC Connector F 14 POS 2mm IDT RA Cable Mount (Alt: 1-111626-8) RoHS : Compliant | 0 | |||
| 1-111626-8 | TE Connectivity | Conn IDC Connector F 14 POS 2mm IDT RA Cable Mount (Alt: 1-111626-8) RoHS : Compliant | 0 | |||
| 5991111628 | Bel Fuse | Removal Tool for 18 and 30 Position SHS Harness Connector (Alt: 5991111628) RoHS : Not Compliant | 0 | |||
| 1-111614-0 | TE Connectivity | Connector Accessories 44 POS Strain Relief Polyester Black (Alt: 1-111614-0) RoHS : Compliant | 0 | |||
| 1-111614-0 | TE Connectivity | Connector Accessories 44 POS Strain Relief Polyester Black (Alt: 1-111614-0) RoHS : Compliant | 0 | |||
| 1-111623-0 | TE Connectivity | Conn IDC Connector RCP 44 POS 2mm IDT RA Cable Mount (Alt: 1-111623-0) RoHS : Not Compliant | 0 | |||
| 5991111612 | Bel Fuse | Opening Tool for ModICE LE Enclosures (Alt: 5991111612) RoHS : Not Compliant | 0 | |||
| 1241.1111.6096 | Schurter Electronic Components | Switch Tactile NO SPST Round Button PC Pins 008A 24VDC 1000000Cycle 3N Panel MountThrough Hole (Alt: 1241.1111.6096) RoHS : Compliant | 0 | |||
| 1241.1111.6095 | Schurter Electronic Components | Switch Tactile NO SPST Round Button PC Pins 008A 24VDC 1000000Cycle 3N Panel MountThrough Hole (Alt: 1241.1111.6095) RoHS : Compliant | 0 | |||
| 54122-111161650LF | Amphenol Corporation | Conn Board Stacker HDR 16 POS 254mm Solder ST ThruHole Box (Alt: 54122-111161650LF) RoHS : Compliant | 0 | |||
![]() Avnet Silica | FA11116_LXP-O-90 | LEDIL | LXP Lenses For CREEXPE LEDs (Alt: FA11116_LXP-O-90) RoHS : Compliant | 0 | ||
| S1W0-1111659009-0000003S-00001 | Seoul Semiconductor | LED MID POWER WICOP 2 9V CCT 6500K CRI 90 3 STEP (Alt: S1W0-1111659009-0000003S-00001) RoHS : Compliant | 0 | |||
| S1W0-1111657003-00000000-00001 | Seoul Semiconductor | (Alt: S1W0-1111657003-00000000-00001) RoHS : Compliant | 0 | |||
| S1W0-1111659003-00000000-00001 | Seoul Semiconductor | (Alt: S1W0-1111659003-00000000-00001) RoHS : Compliant | 0 | |||
| S1WM-1111658009-0000003S-00001 | Seoul Semiconductor | LED Chip Cool White 6500K 700mA 2Pin Surface Mount TR (Alt: S1WM-1111658009-0000003S-00001) RoHS : Compliant | 0 | |||
| S1W0-1111657003-0000003S-00001 | Seoul Semiconductor | LED Chip Cool White 6500K 700mA 2Pin Surface Mount TR (Alt: S1W0-1111657003-0000003S-00001) RoHS : Compliant | 0 | |||
| S1W0-1111658003-0000003S-00001 | Seoul Semiconductor | LED Chip Cool White 6500K 700mA 2Pin Surface Mount TR (Alt: S1W0-1111658003-0000003S-00001) RoHS : Compliant | 0 | |||
| S1W0-1111657003-0000004S-00001 | Seoul Semiconductor | LED Chip Cool White 6500K 700mA 2Pin SMD TR (Alt: S1W0-1111657003-0000004S-00001) RoHS : Compliant | 0 | |||
| S1W0-1111659003-0000003S-00001 | Seoul Semiconductor | LED Chip Cool White 6500K 700mA 2Pin SMD TR (Alt: S1W0-1111659003-0000003S-00001) RoHS : Compliant | 0 | |||
| S1W0-1111658003-00000000-00001 | Seoul Semiconductor | (Alt: S1W0-1111658003-00000000-00001) RoHS : Compliant | 0 | |||
![]() DB Roberts | E5-2-111-160 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | ||
| 53-11-116-24 | Southco | 0 | ||||
| RBF-7.1-11.1-16 | Essentra Components | RIVET,BARBED,BLK,.281 IN HOLE, | 0 | |||
| MM-01-111-60 | Southco | Rugged construction corrosion-resistant materials and attractive designs make these locks desirable for use in top-of-the-line marine environment applications. Various accessory handle anti-rattle handle self-adjusting door hook and top-stop door-hol | 0 | |||
| E5-1-111-161 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| 1111650000VR | Essentra Components | 0 | ||||
| 1111600000VR | Essentra Components | 0 | ||||
| 111116 | Essentra Components | 0 | ||||
| 1111630000VR | Essentra Components | 0 | ||||
| 1111640000VR | Essentra Components | 0 | ||||
| 1111620000VR | Essentra Components | 0 | ||||
| E5-1-111-160 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| 81-11-160-16 | Southco | The simplicity of a quarter turn is all it takes to secure panels quickly and easily with these versatile little fasteners. Numerous head styles stud lengths receptacle styles and accessories provide flexibility for accommodating many specific mountin | 0 | |||
| A1-11/16A | Essentra Components | ROUND END CAPLDPE BLUE | 0 | |||
| E5-2-111-161 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
![]() EBV Elektronik | FA11116_LXP-O-90 | LEDIL | LXP Lenses For CREEXPE LEDs (Alt: FA11116_LXP-O-90) RoHS : Compliant | 0 | ||
![]() Master Electronics | IULNK111-1-62-63.0 | Sensata Circuit Breakers | Circuit Breaker Magnetic 3Pole 63A RoHS : Compliant |
| 15 | |
| IULNK111-1-62-30.0-BK | Sensata Circuit Breakers | Circuit Breaker - Magnetic (Hydraulic Delay) - IUL Series - 3 Pole - 30A - Series Configuration -50/60Hz - Long Delay - Stud Terminals - Panel Mount. RoHS : Compliant |
| 13 | ||
| FW5A11116S03 | TE Connectivity | Fw5A11116S03=Full Size 5 Amp Relay |Cii Te Connectivity FW5A11116S03 MOQ Reduction RoHS : Not Compliant |
| 0 | ||
| HTSW-111-16-TM-D | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-S-D-111-166 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 82A0111-16-F868-9 | TE Connectivity | 82A0111-16-F868-9 MOQ Reduction RoHS : Compliant |
| 0 | ||
| IULDHK111-1-66-15.0-C-91 | Sensata Circuit Breakers | Circuit Breaker Hydraulic Magnetic 3 Pole IUL Series | Sensata - Airpax IULDHK111-1-66-15.0-C-91 RoHS : Compliant |
| 0 | ||
| IULDHK1111-1-62-60.0-K-01 | Sensata Circuit Breakers | Cir Brkr Hyd Mag RoHS : Compliant |
| 0 | ||
| IULHK111-1-63-75.0-A-01 | Sensata Circuit Breakers | Cir Brkr Hyd Mag RoHS : Compliant |
| 0 | ||
| IULHK111-1-66-20.0-E-91 | Sensata Circuit Breakers | Circuit Breaker Magnetic Circuit Protectors 3Pole 20A RoHS : Compliant |
| 0 | ||
| IULN111-1-63-3.50-D | Sensata Circuit Breakers | Circuit Breaker Hydraulic Magnetic 3 Pole IUL Series | Sensata - Airpax IULN111-1-63-3.50-D RoHS : Compliant |
| 0 | ||
| IULN111-1-63-5.00-E | Sensata Circuit Breakers | Circuit Breaker Hydraulic Magnetic 3 Pole IUL Series | Sensata - Airpax IULN111-1-63-5.00-E RoHS : Compliant |
| 0 | ||
| IULNK111-1-63-35.0 | Sensata Circuit Breakers | Circuit Breaker Hydraulic Magnetic 3 Pole IUL Series | Sensata - Airpax IULNK111-1-63-35.0 RoHS : Compliant |
| 0 | ||
| IEGH111-1-62-20.0-21-V | Sensata Circuit Breakers | Circuit Breaker Hydraulic Magnetic 3Pole 20A RoHS : Compliant |
| 0 | ||
| IELH111-1-62-40.0-AE-01-V | Sensata Circuit Breakers | Cir Brkr Hyd Mag RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3M0111-16 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/119-RG174-0XDS2, RF Cable Type: M17/119-RG174, RF Cable Impedance: 50 Ohm, Length: 16 inches. MIL-DTL-17 SMA Male to TNC Male Cable 16 Inch Length Using M17/119-RG174 Coax., Radio frequency assembly MIL-DTL-17 SMA male to TNC male cable 16 inch length using M17/119-RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 SMA male to TNC male cable 16 inch length using M17/119-RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/55-3026 SMA to M39012/26-0018 TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/55-3026 SMA cable connection on one end and M39012/26-0018 TNC cable connection on the other. Our M39012/55-3026 SMA to M39012/26-0018 TNC cable assemblies have a male gender on end 1 and male on end 2. This M39012/55-3026 SMA to M39012/26-0018 TNC cable is a male to male coax assembly, PE3M0111-16, can also be known as a MIL-DTL-17/MIL-C-17 M39012/55-3026 SMA plug to M39012/26-0018 TNC plug cable assembly and will be shipped same-day as it is purchased. M39012/55-3026 SMA plug to M39012/26-0018 TNC plug cable assembly PE3M0111-16 is built with M17/119-RG174 which is a flexible coax type. The Pasternack flexible M39012/55-3026 SMA cable assembly is manufactured with M39012/55-3026 SMA to M39012/26-0018 TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this MIL-C-17 1 GHz maximum frequency M39012/55-3026 SMA male to M39012/26-0018 TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0111-16 can also be used in the other direction and will be M39012/26-0018 TNC male to M39012/55-3026 SMA male cable assembly if the opposite connectivity is required. M39012/55-3026 SMA plug to M39012/26-0018 TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/55-3026 SMA to M39012/26-0018 TNC cable assembly for quick shipment worldwide. Variations of M39012/55-3026 SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 SMA male to TNC male cable 16 inch length using M17/119-RG174 coax. |
| 6 | |
| PE3W11116 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR401FL, RF Cable Type: PE-SR401FL, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE3C11116-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male Right Angle to TNC Male Low Loss Cable 48 Inch Length Using PE-P142LL Coax with Lock Wire Holes., Pasternack’s PE3C11116-48 low loss right angle SMA male to TNC male RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a TNC cable connection on the other. Our SMA to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3C11116-48 can also be known as a low loss right angle SMA plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C11116-48 RF cable has an FEP jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. Our right angle SMA male to TNC male cable has a maximum VSWR of 1.5:1. This PE3C11116-48 SMA plug to TNC plug cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. One connector features the clamp/solder attachment method, while the other has the solder attachment method. Additional dimensions, specifications, and CAD drawings for this 48-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3C11116-48 can also be used in the other direction and will be a TNC male to right angle SMA male cable assembly if the opposite connectivity is required. This low loss SMA right angle plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. |
| 0 | ||
| PE3C11116 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to TNC Male Low Loss Cable Using PE-P142LL Coax with Lock Wire Holes., Pasternack’s PE3C11116 low loss right angle SMA male to TNC male RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a TNC cable connection on the other. Our SMA to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3C11116 can also be known as a low loss right angle SMA plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C11116 RF cable has an FEP jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. Our right angle SMA male to TNC male cable has a maximum VSWR of 1.5:1. This PE3C11116 SMA plug to TNC plug cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. One connector features the clamp/solder attachment method, while the other has the solder attachment method. Additional dimensions, specifications, and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C11116 can also be used in the other direction and will be a TNC male to right angle SMA male cable assembly if the opposite connectivity is required. This low loss SMA right angle plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. | 0 | |||
| PE3C11116-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male Right Angle to TNC Male Low Loss Cable 24 Inch Length Using PE-P142LL Coax with Lock Wire Holes., Pasternack’s PE3C11116-24 low loss right angle SMA male to TNC male RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a TNC cable connection on the other. Our SMA to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3C11116-24 can also be known as a low loss right angle SMA plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C11116-24 RF cable has an FEP jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. Our right angle SMA male to TNC male cable has a maximum VSWR of 1.5:1. This PE3C11116-24 SMA plug to TNC plug cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. One connector features the clamp/solder attachment method, while the other has the solder attachment method. Additional dimensions, specifications, and CAD drawings for this 24-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3C11116-24 can also be used in the other direction and will be a TNC male to right angle SMA male cable assembly if the opposite connectivity is required. This low loss SMA right angle plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. |
| 0 | ||
| PE3C11116-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male Right Angle to TNC Male Low Loss Cable 60 Inch Length Using PE-P142LL Coax with Lock Wire Holes., Pasternack’s PE3C11116-60 low loss right angle SMA male to TNC male RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a TNC cable connection on the other. Our SMA to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3C11116-60 can also be known as a low loss right angle SMA plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C11116-60 RF cable has an FEP jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. Our right angle SMA male to TNC male cable has a maximum VSWR of 1.5:1. This PE3C11116-60 SMA plug to TNC plug cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. One connector features the clamp/solder attachment method, while the other has the solder attachment method. Additional dimensions, specifications, and CAD drawings for this 60-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3C11116-60 can also be used in the other direction and will be a TNC male to right angle SMA male cable assembly if the opposite connectivity is required. This low loss SMA right angle plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. |
| 0 | ||
| PE3C11116-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male Right Angle to TNC Male Low Loss Cable 12 Inch Length Using PE-P142LL Coax with Lock Wire Holes., Pasternack’s PE3C11116-12 low loss right angle SMA male to TNC male RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a TNC cable connection on the other. Our SMA to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3C11116-12 can also be known as a low loss right angle SMA plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C11116-12 RF cable has an FEP jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. Our right angle SMA male to TNC male cable has a maximum VSWR of 1.5:1. This PE3C11116-12 SMA plug to TNC plug cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. One connector features the clamp/solder attachment method, while the other has the solder attachment method. Additional dimensions, specifications, and CAD drawings for this 12-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3C11116-12 can also be used in the other direction and will be a TNC male to right angle SMA male cable assembly if the opposite connectivity is required. This low loss SMA right angle plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. |
| 0 | ||
| PE3C11116-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male Right Angle to TNC Male Low Loss Cable 36 Inch Length Using PE-P142LL Coax with Lock Wire Holes., Pasternack’s PE3C11116-36 low loss right angle SMA male to TNC male RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a TNC cable connection on the other. Our SMA to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3C11116-36 can also be known as a low loss right angle SMA plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C11116-36 RF cable has an FEP jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. Our right angle SMA male to TNC male cable has a maximum VSWR of 1.5:1. This PE3C11116-36 SMA plug to TNC plug cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. One connector features the clamp/solder attachment method, while the other has the solder attachment method. Additional dimensions, specifications, and CAD drawings for this 36-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3C11116-36 can also be used in the other direction and will be a TNC male to right angle SMA male cable assembly if the opposite connectivity is required. This low loss SMA right angle plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. |
| 0 | ||
![]() TE Connectivity | 82A0111-16-9 | TE Connectivity | 82A0111-16-9 Cable Type: Spec 80 Operating Voltage: 600 V Wire & Cable Insulation Material: Modified Radiation Cross-linked ETFE Polymer Conductor Material: Tin-Coated Copper Wire Size: 16 AWG Spec 80 600 V Modified Radiation Cross-linked ETFE Polymer Tin-Coated Copper | Hook Up Wire | Part Number: 82A0111-16-9 | Internal Number: 562243-000 | Alias Number: 5-1194442-9 | 16 AWG | TE Connectivity RoHS : Compliant |
| 26,434 | |
| 55A0111-16-9 | TE Connectivity | 55A0111-16-9 Cable Type: Spec 55 Operating Voltage: 600 V Wire & Cable Insulation Material: Modified Radiation Cross-linked ETFE Polymer Conductor Material: Tin-Coated Copper Wire Size: 16 AWG Spec 55 600 V Modified Radiation Cross-linked ETFE Polymer Tin-Coated Copper | Hook Up Wire | Part Number: 55A0111-16-9 | Internal Number: 216016-004 | Alias Number: 9-1191561-4 | 16 AWG | TE Connectivity RoHS : Compliant |
| 6,413 | ||
| 1-111614-0 | TE Connectivity | 044 STRAIN RELIEF 2MM Connector Cover Type: Strain Relief Cover Primary Product Color: Black Primary Product Material: Polyester Number of Positions: 44 Operating Temperature (Max): 105 °C Strain Relief Cover Black | Connector Cap & Cover | Part Number: 1-111614-0 | Internal Number: 1-111614-0 | Polyester | TE Connectivity RoHS : Compliant |
| 2,978 | ||
| 1-111623-9 | TE Connectivity | 14, 2MM, POL,30 DP, LEAD FREE Connector System: Wire-to-Board Number of Positions: 14 Centerline (Pitch): 2 mm Centerline (Pitch): .079 in Row-to-Row Spacing: 2 mm Wire-to-Board 14 2 mm .079" | Ribbon Cable Connector | Part Number: 1-111623-9 | Internal Number: 1-111623-9 | TE Connectivity RoHS : Compliant |
| 2,509 | ||
| 1-111626-7 | TE Connectivity | 10, 2MM, 30 DP, LEAD FREE Connector System: Wire-to-Board Number of Positions: 10 Centerline (Pitch): 2 mm Centerline (Pitch): .079 in Row-to-Row Spacing: 2 mm Wire-to-Board 10 2 mm .079" | Ribbon Cable Connector | Part Number: 1-111626-7 | Internal Number: 1-111626-7 | TE Connectivity RoHS : Compliant |
| 1,084 | ||
| 1-111626-9 | TE Connectivity | 20, 2MM, 30 DP, LEAD FREE Connector System: Wire-to-Board Number of Positions: 20 Centerline (Pitch): 2 mm Centerline (Pitch): .079 in Row-to-Row Spacing: 2 mm Wire-to-Board 20 2 mm .079" | Ribbon Cable Connector | Part Number: 1-111626-9 | Internal Number: 1-111626-9 | TE Connectivity RoHS : Compliant |
| 403 | ||
| 1-111626-8 | TE Connectivity | 14, 2MM, 30 DP, LEAD FREE Connector System: Wire-to-Board Number of Positions: 14 Centerline (Pitch): 2 mm Centerline (Pitch): .079 in Row-to-Row Spacing: 2 mm Wire-to-Board 14 2 mm .079" | Ribbon Cable Connector | Part Number: 1-111626-8 | Internal Number: 1-111626-8 | TE Connectivity RoHS : Compliant |
| 366 | ||
![]() Vyrian | 55A0111-16-90 | TE Connectivity | WIRE AND CABLE RoHS : Compliant | 11,093 | ||
| 1011116 | Phoenix Contact | Barrier Strip Terminal Block, 8A, 1.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 9,246 | |||
| 55A0111-16-0 | TE Connectivity | Wire And Cable, 1 Conductor(s), 16AWG, 600V, Flexible Cord And Fixture Wire RoHS : Compliant | 8,847 | |||
| 55A0111-16-9 | TE Connectivity | Wire And Cable, 1 Conductor(s), 16AWG, 600V, Flexible Cord And Fixture Wire RoHS : Compliant | 8,524 | |||
| MAX11116AUT+ | Analog Devices Inc | ADC, Successive Approximation, 8-Bit, 1 Func, 1 Channel, Serial Access, CMOS, PDSO6 RoHS : Compliant | 7,741 | |||
| 44A0111-16-09 | TE Connectivity | Wire And Cable, 16AWG, 600V, Flexible Cord And Fixture Wire RoHS : Compliant | 7,307 | |||
| 44A0111-16-95 | TE Connectivity | Wire And Cable, 1 Conductor(s), 16AWG, 600V, Flexible Cord And Fixture Wire RoHS : Compliant | 7,002 | |||
| DT111/16GBBK | Kingston Technology Company | 6,672 | ||||
| 44A0111-16-0 | TE Connectivity | Wire And Cable, 1 Conductor(s), 16AWG, 600V, Flexible Cord And Fixture Wire RoHS : Compliant | 6,177 | |||
| 55A0111-16-6 | TE Connectivity | Wire And Cable, 1 Conductor(s), 16AWG, 600V, Flexible Cord And Fixture Wire RoHS : Compliant | 5,539 | |||
| 44A0111-16-94 | TE Connectivity | Wire And Cable, 1 Conductor(s), 16AWG, 600V, Flexible Cord And Fixture Wire RoHS : Compliant | 4,210 | |||
| DT111/16GBCL | Kingston Technology Company | 3,350 | ||||
| DT111/16GB | Kingston Technology Company | 3,080 | ||||
| LELH111-1-62-35.0-01 | Sensata Technologies | Magnetic Circuit Breaker, 3 Pole(s), 35A, 125VAC, Panel Mount | 873 | |||
| IELHK111-1-61-100.-01-V | Sensata Technologies | Magnetic Circuit Breaker, 3 Pole(s), 100A, 250VAC, Panel Mount | 582 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |