112-VC2AC Price, Distributor, Stock

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-DB, RF Cable Type: LMR-240-DB, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male Right Angle to N Male Low Loss Cable 12 Inch Length Using LMR-240-DB Coax., Radio frequency assembly N male right angle to N male low loss cable 12 inch length using LMR-240-DB coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to N male low loss cable 12 inch length using LMR-240-DB coax, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle type N cable connection on one end and type N cable connection on the other. Our low loss right angle N type to type N cable assemblies have a male gender on end 1 and male on end 2. PE3W11251-12 can also be known as a low loss right angle type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE3W11251-12 is built with LMR-240-DB which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle N type to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type right angle male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W11251-12 can also be used in the other direction and will be type N male to right angle type N male cable assembly if the opposite connectivity is required. Low loss N type right angle plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to N male low loss cable 12 inch length using LMR-240-DB coax.

1 : $169.99
25 : $161.49
50 : $152.99
100 : $146.19

1,602

PE3C4401-12

Pasternack Enterprises

Key Specifications, Connector Series 1: SSMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 12 inches. SSMC Plug to TNC Male Cable 12 Inch Length Using RG178 Coax., Radio frequency assembly SSMC plug to TNC male cable 12 inch length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SSMC plug to TNC male cable 12 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SSMC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SSMC cable connection on one end and TNC cable connection on the other. Our SSMC to TNC cable assemblies have a plug gender on end 1 and male on end 2. This SSMC to TNC cable is a plug to male coax assembly, PE3C4401-12, can also be known as a SSMC male to TNC plug cable assembly and will be shipped same-day as it is purchased. SSMC male to TNC plug cable assembly PE3C4401-12 is built with RG178 which is a flexible coax type. The Pasternack flexible SSMC cable assembly is manufactured with SSMC to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 2 GHz maximum frequency SSMC plug to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4401-12 can also be used in the other direction and will be TNC male to SSMC plug cable assembly if the opposite connectivity is required. SSMC male to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SSMC to TNC cable assembly for quick shipment worldwide. Variations of SSMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SSMC plug to TNC male cable 12 inch length using RG178 coax.

1 : $124.99
25 : $118.74
50 : $112.49
100 : $107.49

104

PE3C6191-12

Pasternack Enterprises

Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 12 inches. Plenum 7/16 DIN Male to N Female Bulkhead Low PIM Cable 12 Inch Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum 7/16 DIN male to N female bulkhead low PIM cable 12 inch length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 7/16 DIN male to N female bulkhead low PIM cable 12 inch length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-716M-LP 7/16 DIN to TC-SPP250-NF-BH-LP type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-716M-LP 7/16 DIN cable connection on one end and TC-SPP250-NF-BH-LP type N bulkhead cable connection on the other. Our low PIM TC-SPP250-716M-LP 7/16 DIN to TC-SPP250-NF-BH-LP N type cable assemblies have a male gender on end 1 and female on end 2. This TC-SPP250-716M-LP 7/16 DIN to TC-SPP250-NF-BH-LP type N cable is a male to female coax assembly, PE3C6191-12, can also be known as a low PIM TC-SPP250-716M-LP 7/16 DIN plug to TC-SPP250-NF-BH-LP type N jack cable assembly and will be shipped same-day as it is purchased. TC-SPP250-716M-LP 7/16 DIN plug to TC-SPP250-NF-BH-LP N type jack cable assembly PE3C6191-12 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-716M-LP 7/16 DIN cable assembly is manufactured with TC-SPP250-716M-LP 7/16 DIN to TC-SPP250-NF-BH-LP N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-716M-LP 7/16 DIN male to TC-SPP250-NF-BH-LP type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6191-12 can also be used in the other direction and will be TC-SPP250-NF-BH-LP type N female bulkhead to TC-SPP250-716M-LP 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM TC-SPP250-716M-LP 7/16 DIN plug to TC-SPP250-NF-BH-LP type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-716M-LP 7/16 DIN to TC-SPP250-NF-BH-LP N type cable assembly for quick shipment worldwide. Variations of TC-SPP250-716M-LP 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 7/16 DIN male to N female bulkhead low PIM cable 12 inch length using SPP-250-LLPL coax using Times Microwave parts.

1 : $103.99
25 : $98.79
50 : $93.59
100 : $89.43

PE3C8511-12

Pasternack Enterprises

Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 7 inches. Outdoor Rated 7/16 DIN Male to 7/16 DIN Female Cable Using SPO-250 Coax Using Times Microwave Parts in 12 inch., Radio frequency assembly outdoor rated 7/16 DIN male to 7/16 DIN female cable using SPO-250 coax using Times Microwave parts in 12 inch from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 7/16 DIN male to 7/16 DIN female cable using SPO-250 coax using Times Microwave parts in 12 inch, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 7/16 DIN cable connection on one end and 7/16 DIN cable connection on the other. Our low PIM 7/16 DIN to 7/16 DIN cable assemblies have a male gender on end 1 and female on end 2. This 7/16 DIN to 7/16 DIN cable is a male to female coax assembly, PE3C8511-12, can also be known as a low PIM 7/16 DIN plug to 7/16 DIN jack cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN jack cable assembly PE3C8511-12 is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 7/16 DIN male to 7/16 DIN female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8511-12 can also be used in the other direction and will be 7/16 DIN female to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to 7/16 DIN jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 7/16 DIN male to 7/16 DIN female cable using SPO-250 coax using Times Microwave parts in 12 inch.

1 : $65.29
25 : $62.03
50 : $58.76
100 : $56.15

PE-W112S001-12

Pasternack Enterprises

Key Specifications, Waveguide Size 1: WR-112, Flange Size 1: UG-51/U, Waveguide Size 2: WR-112, Flange Size 2: UG-51/U, Length: 12 inches, Frequency, Min: 7.05 GHz, Frequency, Max: 10 GHz. WR-112 Commercial Grade Straight Waveguide Section 12 Inch Length with UG-51/U Flange Operating from 7.05 GHz to 10 GHz. PE-W112S001-12 WR-112 waveguide section is straight and is 12 inches long. This 12 inch WR-112 straight waveguide section from Pasternack is commercial grade and has a UG-51/U flange. Our straight WR-112 waveguide section with UG-51/U flange has a minimum frequency of 7.05 GHz and a maximum frequency of 10 GHz. WR-112 waveguide section PE-W112S001-12 is part of over 40,000 RF, microwave and millimeter wave components. Our commercial grade WR-112 straight waveguide section will ship same the day as it is purchased worldwide as with our other RF parts.

1 : $797.99
10 : $766.07
25 : $734.15

PE3C0661-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: HN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SHV, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. HN Male to SHV Plug Cable 12 Inch Length Using RG223 Coax., Radio frequency assembly HN male to SHV plug cable 12 inch length using RG223 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The HN male to SHV plug cable 12 inch length using RG223 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HN to SHV cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with HN cable connection on one end and SHV cable connection on the other. Our HN to SHV cable assembly has male gender on end 1 and plug on end 2. PE3C0661-12 can also be known as a HN plug to SHV male cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PE dielectric type. HN plug to SHV male cable assembly PE3C0661-12 is built with RG223 which is a flexible coax type. The Pasternack flexible HN cable assembly is manufactured with HN to SHV cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3C0661-12 RF cable are available on our downloadable PDF datasheet.PE3C0661-12 can also be used in the other direction and will be SHV plug to HN male cable assembly if the opposite connectivity is required. HN plug to SHV male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HN to SHV cable assembly for quick shipment worldwide. Variations of HN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal HN RF cable assembly as per your requirements.

1 : $147.99
25 : $140.59
50 : $133.19
100 : $127.27

PE3C1121/SP

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Female to Reverse Polarity SMA Male Right Angle Low Loss Cable Using LMR-195 Coax with HeatShrink, LF Solder., Radio frequency assembly reverse polarity SMA female to reverse polarity SMA male right angle low loss cable using LMR-195 coax with heatshrink, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. Reverse polarity SMA female to reverse polarity SMA male right angle low loss cable using LMR-195 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with reverse polarity SMA cable connection on one end and right angle reverse polarity SMA cable connection on the other. Our low loss reverse polarity SMA to right angle reverse polarity SMA cable assemblies have a female gender on end 1 and male on end 2. This reverse polarity SMA to reverse polarity SMA cable is a female to male coax assembly, PE3C1121/SP, can also be known as a low loss reverse polarity SMA jack to right angle reverse polarity SMA plug cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA jack to reverse polarity SMA plug cable assembly PE3C1121/SP is built with LMR-195 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this reverse polarity SMA female to reverse polarity SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1121/SP can also be used in the other direction and will be right angle reverse polarity SMA male to reverse polarity SMA female cable assembly if the opposite connectivity is required. Low loss SMA reverse polarity jack to SMA reverse polarity right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA female to reverse polarity SMA male right angle low loss cable using LMR-195 coax with heatshrink, LF solder.

PE3C11263

Pasternack Enterprises

PE3C1128-150CM

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 59.06 inches. N Male to SMA Female Low Loss Cable 150 cm Length Using PE-P142LL Coax, RoHS., Radio frequency assembly N male to SMA female low loss cable 150 cm length using PE-P142LL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N male to SMA female low loss cable 150 cm length using PE-P142LL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and SMA cable connection on the other. Our low loss type N to SMA cable assemblies have a male gender on end 1 and female on end 2. This type N to SMA cable is a male to female coax assembly, PE3C1128-150CM, can also be known as a low loss type N plug to SMA jack cable assembly and will be shipped same-day as it is purchased. N type plug to SMA jack cable assembly PE3C1128-150CM is built with PE-P142LL which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency type N male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1128-150CM can also be used in the other direction and will be SMA female to N type male cable assembly if the opposite connectivity is required. Low loss N type plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to SMA female low loss cable 150 cm length using PE-P142LL coax, RoHS.

1 : $306.99
25 : $291.64
50 : $276.29

PE3C1271-12

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 12 inches. N Male Right Angle to TNC Male Right Angle Low Loss Cable 12 Inch Length Using PE-P142LL Coax, RoHS., Radio frequency assembly N male right angle to TNC male right angle low loss cable 12 inch length using PE-P142LL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N male right angle to TNC male right angle low loss cable 12 inch length using PE-P142LL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle type N cable connection on one end and right angle TNC cable connection on the other. Our low loss right angle N type to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. This N type to TNC cable is a male to male coax assembly, PE3C1271-12, can also be known as a low loss right angle type N plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to TNC plug cable assembly PE3C1271-12 is built with PE-P142LL which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to right angle TNC cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency N type right angle male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1271-12 can also be used in the other direction and will be right angle TNC male to right angle type N male cable assembly if the opposite connectivity is required. Low loss N type right angle plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to TNC male right angle low loss cable 12 inch length using PE-P142LL coax, RoHS.

1 : $455.99
25 : $433.19
50 : $410.39

PE3C5112

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMB Plug Right Angle Cable Using PE-P086 Coax., Radio frequency assembly SMA male right angle to SMB plug right angle cable using PE-P086 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to SMB plug right angle cable using PE-P086 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and right angle SMB cable connection on the other. Our right angle SMA to right angle SMB cable assemblies have a male gender on end 1 and plug on end 2. This SMA to SMB cable is a male to plug coax assembly, PE3C5112, can also be known as a right angle SMA plug to right angle SMB male cable assembly and will be shipped same-day as it is purchased. SMA plug to SMB male cable assembly PE3C5112 is built with PE-P086 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle SMB cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA right angle male to SMB right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5112 can also be used in the other direction and will be right angle SMB plug to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMB right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMB cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMB plug right angle cable using PE-P086 coax.

PE3C5193/SP1-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Female Bulkhead to SMP Female Right Angle Cable 12 Inch Length Using PE-P086 Coax with HeatShrink and 90 Deg. Clock., Radio frequency assembly SMA female bulkhead to SMP female right angle cable 12 inch length using PE-P086 coax with heatshrink and 90 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female bulkhead to SMP female right angle cable 12 inch length using PE-P086 coax with heatshrink and 90 deg. clock, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA bulkhead cable connection on one end and a right angle SMP cable connection on the other. Our SMA to right angle SMP cable assembly has a female gender on end 1 and a female on end 2. PE3C5193/SP1-12 can also be known as a SMA jack to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C5193/SP1-12 RF cable has a FEP jacket of 0.104-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 110 dB. Our bulkhead SMA female to right angle SMP female cable has a maximum VSWR of 1.4:1. SMA jack to SMP jack cable assembly PE3C5193/SP1-12 is built with PE-P086 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMP cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C5193/SP1-12 can also be used in the other direction and will be a right angle SMP female to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMP RF cable assembly as per your requirements.

1 : $136.99
10 : $131.51
25 : $126.03
100 : $120.55

PE3C7901-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to SMA Female Bulkhead Cable 12 Inch Length Using RG58 Coax., Radio frequency assembly SMA male to SMA female bulkhead cable 12 inch length using RG58 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA female bulkhead cable 12 inch length using RG58 coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA bulkhead cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. PE3C7901-12 can also be known as a SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3C7901-12 is built with RG58 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5 GHz maximum frequency SMA male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7901-12 can also be used in the other direction and will be SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female bulkhead cable 12 inch length using RG58 coax.

1 : $94.19
25 : $89.48
50 : $84.77
100 : $81.0

PE3C8061-12

Pasternack Enterprises

Key Specifications, Connector Series 1: 2.2-5, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 12 inches.

1 : $113.99
25 : $108.29
50 : $102.59
100 : $98.03

PE3M0331-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Size: 12, Connector 1 Gender: Pin, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Specification: MIL-STD-348, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: Coax, RF Cable Specification: PE-P047 datasheet, RF Cable Impedance : 50 Ohm. SMPM Size 12 D38999 Contact Pin to SMA Female Cable 12 Inch Length Using PE-P047 Coax with HeatShrink, LF Solder. The PE3M0331-12 from Pasternack is a D38999 contact cable assembly that is built with a size 12 mini SMP pin contact connection on one end and a SMA female connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This mini SMP to SMA cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. The PE3M0331-12 RF cable has a FEP jacket of 0.056-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 125 degrees C. Our mini SMP pin to SMA female cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and FEP dielectric type. The PE3M0331-12 between-series RF cable has 0.4 inches of repeated minimum bend radius along with 90 dB of minimum RF shielding. Mini SMP pin to SMA female cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack PE3M0331-12 flexible cable assembly has a 50 Ohm impedance and is double-shielded. Additional dimensions, specifications, and CAD drawings for this mini SMP to SMA RF cable are available on our downloadable PDF datasheet. Mini SMP pin to SMA female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of mini SMP and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to SMA RF cable assembly as per your requirements.

1 : $177.99
10 : $170.87
25 : $163.75
100 : $156.63

TE Connectivity

1-1123724-2

TE Connectivity

3.96EP HDR ASSY 2(3)P NATURAL PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 3 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 3 | PCB Header & Receptacle | Part Number: 1-1123724-2 | Internal Number: 1-1123724-2 | TE Connectivity
RoHS : Compliant

1,000 : $0.13
100 : $0.18
10 : $0.22
1 : $0.29

83,744

31112

TE Connectivity

BUDGET RING 12-10 6 Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 12 – 10 AWG Wire Size: 3 – 6 mm² Wire Size: 5180 – 13100 CMA Stud Size: M3.5 #6 Closed Ring Tongue Terminal 12 – 10 AWG 3 – 6 mm² 5180 – 13100 CMA | Ring Terminal | Part Number: 31112 | Internal Number: 31112 | TE Connectivity
RoHS : Compliant

5,000 : $0.48
2,500 : $0.49
1,000 : $0.5
500 : $0.51
250 : $0.52
100 : $0.53
50 : $0.55
25 : $0.56
10 : $0.57
1 : $0.58

13,016

2029112-3

TE Connectivity

3P RCPT SR VAL-U-LOK GW Number of Positions: 3 Connector & Housing Type: Receptacle Connector Product Type: Housing Termination Method to Wire & Cable: Crimp Connector System: Wire-to-Wire Standard Rectangular Connector | 3 Receptacle Housing Crimp | Part Number: 2029112-3 | Internal Number: 2029112-3 | TE Connectivity
RoHS : Compliant

1,000 : $0.28
100 : $0.37
10 : $0.46
1 : $0.58

1,847

2041126-1

TE Connectivity

MODULAR JACK, RJ45, SMT TYPE,AU: 6u'' Modular Jack & Plug Interface Type: RJ45 Port Configuration: Single Port Port Matrix Configuration: 1 x 1 Modular Jacks & Plugs Products: RJ Type Jacks & Plugs Modular Connector Style: Jack RJ45 Single Port 1 x 1 RJ Type Jacks & Plugs | Rj45 Connector | Part Number: 2041126-1 | Internal Number: 2041126-1 | TE Connectivity
RoHS : Compliant

1,000 : $2.15
500 : $2.22
250 : $2.28
100 : $2.36
50 : $2.43
1 : $2.67

1,840

2106112-6

TE Connectivity

Assembly, Vertical TH Header, 4-Position Connector System: Wire-to-Wire Number of Positions: 4 Centerline (Pitch): .14 mm Centerline (Pitch): 3.5 in Sealable: Yes Wire-to-Wire 4 .14 mm 3.5" | Plug & Socket Lighting Connector | Part Number: 2106112-6 | Internal Number: 2106112-6 | TE Connectivity
RoHS : Compliant

1,000 : $2.95
500 : $3.04
250 : $3.13
100 : $3.22
50 : $3.3
25 : $3.39
10 : $3.48
1 : $3.57

1,703

RN112-0.5-02-27M

TE Connectivity

RN112-0.5-02-27M Operating Voltage (Max): 300 VDC Current Rating (Max): .5 A Input Termination Type: PCB Terminal Pollution Degree: PD2 Output Termination Type: PCB Terminal Emc / Rfi Chokes Rn Series | 300 VDC .5 A PCB Terminal PD2 | Part Number: RN112-0.5-02-27M | Internal Number: 816489-SF | TE Connectivity
RoHS : Compliant

10 : $3.49
1 : $3.89

1,407

1-1241930-1

TE Connectivity

AMP MCP 9.5, CONTACT Terminal Type: Receptacle Wire Size: 9 – 7 AWG Wire Size: 6 – 10 mm² Mating Tab Width: .374 in Mating Tab Width: 9.5 mm Receptacle 9 – 7 AWG 6 – 10 mm² .374" | Amp Mcp & Receptacle And Tab | Part Number: 1-1241930-1 | Internal Number: 1-1241930-1 | TE Connectivity
RoHS : Compliant

1,000 : $1.62
500 : $2.03
250 : $3.09
100 : $4.06
50 : $4.87

775

1-1241150-0

TE Connectivity

10P MOD II BREAK AWAY HDR,SMD, BLISTER PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Board-to-Board Board-to-Board Configuration: Mezzanine (Stacking) Number of Positions: 10 PCB Mount Header Vertical Board-to-Board Mezzanine (Stacking) | PCB Header & Receptacle | Part Number: 1-1241150-0 | Internal Number: 1-1241150-0 | TE Connectivity
RoHS : Compliant

2,500 : $6.68
1,000 : $6.86
500 : $7.04
250 : $7.22
100 : $7.4
50 : $7.58
25 : $7.76
10 : $7.94
1 : $8.12

575

280611-2

TE Connectivity

6P MOD 1 SHROUDED HEADER, ST, 0.4 Au PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Board-to-Board Number of Positions: 6 Number of Rows: 1 PCB Mount Header Vertical Board-to-Board 6 | PCB Header & Receptacle | Part Number: 280611-2 | Internal Number: 280611-2 | TE Connectivity
RoHS : Compliant

1,000 : $3.84
500 : $3.95
250 : $4.07
100 : $4.18
50 : $4.3
25 : $4.42
10 : $4.53
1 : $4.65

199

3-338311-2

TE Connectivity

25POS.HD20 PLG ASSY Number of Positions: 25 Connector & Housing Type: Plug Connector System: Cable-to-Board Connector Mounting Type: Board Mount Connector Shell Size: 3 D-Shaped Connector | 25 Plug Cable-to-Board Board Mount | Part Number: 3-338311-2 | Internal Number: 3-338311-2 | TE Connectivity
RoHS : Compliant

1,000 : $11.88
500 : $12.22
250 : $12.6
100 : $13.02
50 : $13.4
1 : $14.7

161

KUP-11D11-24

TE Connectivity

KUP-11D11-24=KU Relay & Contactor Type: General Purpose Power Relay Current Type: DC Coil Magnetic System: Monostable Contact Arrangement: 2 Form C DPDT-CO Contact Current Rating: 5 A General Purpose Power Relay DC Monostable 2 Form C DPDT-CO | Electromechanical Relay | Part Number: KUP-11D11-24 | Internal Number: 4-1393117-2 | TE Connectivity
RoHS : Compliant

100 : $58.46
50 : $61.26
25 : $64.03
10 : $66.82
1 : $69.59

2273112-1

TE Connectivity

M12 strgt plug to M12 strgt socket AA Cable Assembly Type: M12 to M12 Number of Positions: 3 Cable Assembly Length: .3 m Cable Assembly Length: .98 ft M8/M12 Application Type: Sensor/Actuator M12 to M12 3 .3 m .98 ft | M12 Ms-Fs Double End Cable Assembly Bl | Part Number: 2273112-1 | Internal Number: 2273112-1 | TE Connectivity
RoHS : Compliant

25 : $25.84
10 : $27.84
1 : $29.82

T4112501041-000

TE Connectivity

M12,FEMALE,RA,D CODE,4P,PG7,GOLD Connector System: Cable-to-Cable Circular Connector Type: Circular Connector Receptacle Number of Positions: 4 Circular Connector Shell Size: 20 Sealable: Yes Cable-to-Cable Circular Connector Receptacle 4 20 | M12 Field Installable Unshielded | Part Number: T4112501041-000 | Internal Number: T4112501041-000 | TE Connectivity
RoHS : Compliant

500 : $20.68
250 : $21.39
100 : $22.11
50 : $22.82
25 : $23.53
10 : $24.24
1 : $24.96

W92-X112-3

TE Connectivity

W92-X112-3=M6/M7/M9/W6/W7 Circuit Breaker Type: Magnetic Circuit Function: Series Trip Illuminated: Without Actuator Color: Black Operating Voltage: 277 VAC Magnetic Series Trip Without Black | Circuit Breaker | Part Number: W92-X112-3 | Internal Number: 7-1393254-6 | TE Connectivity
RoHS : Compliant

50 : $283.5
25 : $300.17
10 : $316.84
1 : $333.52

W91-X112-3

TE Connectivity

W91-X112-3=M6/M7/M9/W6/W7 Circuit Breaker Type: Magnetic Circuit Function: Series Trip Illuminated: Without Actuator Color: Black Operating Voltage: 277 VAC Magnetic Series Trip Without Black | Circuit Breaker | Part Number: W91-X112-3 | Internal Number: 2-1393254-7 | TE Connectivity
RoHS : Compliant

100 : $75.6
50 : $79.21
25 : $82.8
10 : $86.4
1 : $90.0

Teledyne HiRel

M38510/11201B2A

Teledyne HiRel

QUAD VOLTAGE COMPARATOR
RoHS : Not Compliant

M38510/11201BDA

Teledyne HiRel

QUAD VOLTAGE COMPARATOR
RoHS : Not Compliant

M38510/11201BCA

Teledyne HiRel

QUAD VOLTAGE COMPARATOR
RoHS : Not Compliant

M38510/11201BAA

Teledyne HiRel

QUAD VOLTAGE COMPARATOR
RoHS : Not Compliant

5962-8984112KA

Teledyne HiRel

CONTACT SALES
RoHS : Not Compliant

5962-89841123A

Teledyne HiRel

CONTACT SALES
RoHS : Not Compliant

5962-89839112A

Teledyne HiRel

PROG. LOGIC DEVICE, ELECTR. ERASABLE, 16-INPUT 8-OUTPUT
RoHS : Not Compliant

5962-8984112LA

Teledyne HiRel

CONTACT SALES
RoHS : Not Compliant

Venkel Ltd.

C0805X7R251-121KNE

VENKEL LTD

HV Chip Capacitor;0805;X7R;250V;120pF;�10%
RoHS : Compliant

12,000

C0603HQN201-120FNP

VENKEL LTD

High-Q NP0 Chip Capacitor;0603;HQN;200V;12pF;�1%
RoHS : Compliant

4,000

C0603C0G251-120JNP

VENKEL LTD

HV Chip Capacitor;0603;C0G;250V;12pF;�5%
RoHS : Compliant

C0805C0G251-120FNP

VENKEL LTD

HV Chip Capacitor;0805;C0G;250V;12pF;�1%
RoHS : Compliant

C1210X7R501-122KNE

VENKEL LTD

HV Chip Capacitor;1210;X7R;500V;1200pF;�10%
RoHS : Compliant

C1210X7R631-122KNE

VENKEL LTD

HV Chip Capacitor;1210;X7R;630V;1200pF;�10%
RoHS : Compliant

C1812C0G251-122JNE

VENKEL LTD

HV Chip Capacitor;1812;C0G;250V;1200pF;�5%
RoHS : Compliant

C1825C0G201-123JNE

VENKEL LTD

HV Chip Capacitor;1825;C0G;200V;0.012uF;�5%
RoHS : Compliant

C1825X7R501-124KNE

VENKEL LTD

HV Chip Capacitor;1825;X7R;500V;0.12uF;�10%
RoHS : Compliant

MELFC0102-YE-5112FT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/3W;�25PPM;51.1K;�1%
RoHS : Compliant

UPTF0603-16W-N-1112CT

VENKEL LTD

Ultra Precision Thin Film CR;0603;1/16W;�10PPM;11.1K;�0.25%
RoHS : Compliant

UPTF0603-16W-N-5112BT-1K

VENKEL LTD

Ultra Precision Thin Film CR;0603;1/16W;�10PPM;51.1K;�0.1%
RoHS : Compliant

UPTF0805-10W-N-5112AT

VENKEL LTD

Ultra Precision Thin Film CR;0805;1/10W;�10PPM;51.1K;�0.05%
RoHS : Compliant

UPTF1206-8W-N-1112CT-1K

VENKEL LTD

Ultra Precision Thin Film CR;1206;1/8W;10PPM;11.1K;�0.25%
RoHS : Compliant

UPTF1206-8W-N-1112DT

VENKEL LTD

Ultra Precision Thin Film CR;1206;1/8W;10PPM;11.1K;�0.5%
RoHS : Compliant

Vyrian

BLA1011-2,112

NXP Semiconductors

RF Power Field-Effect Transistor, 1-Element, L Band, Silicon, N-Channel, Metal-oxide Semiconductor FET
RoHS : Compliant

13,197

BLA1011-200,112

NXP Semiconductors

RF Power Field-Effect Transistor, 1-Element, L Band, Silicon, N-Channel, Metal-oxide Semiconductor FET
RoHS : Compliant

8,838

DSC1123AI1-125.0000

Microchip Technology Inc

LVDS Output Clock Oscillator, 125MHz Nom
RoHS : Compliant

8,025

KTY81/121,112

NXP Semiconductors

Analog Resistance Sensor, 807ohm, Cylindrical, 2 Pin, Through Hole Mount
RoHS : Compliant

7,555

M28F1001-12XF112

STMicroelectronics

7,483

KTY81/122,112

NXP Semiconductors

Analog Resistance Sensor, 823ohm, Cylindrical, 2 Pin, Through Hole Mount
RoHS : Compliant

7,304

KTY81/120,112

NXP Semiconductors

Analog Resistance Sensor, 815ohm, Cylindrical, 2 Pin, Through Hole Mount
RoHS : Compliant

6,942

PCF2112CP/F1,112

NXP Semiconductors

Liquid Crystal Driver, 32-Segment, CMOS, PDIP40
RoHS : Compliant

6,384

M28F1001-12F112

STMicroelectronics

RoHS : Not Compliant

6,021

M28F1001-12C112

STMicroelectronics

RoHS : Not Compliant

5,219

74HC112DB,112

Nexperia

J-K Flip-Flop, HC/UH Series, 2-Func, Negative Edge Triggered, 2-Bit, Complementary Output, CMOS, PDSO16
RoHS : Compliant

5,021

BLS6G2731-120,112

NXP Semiconductors

RF Power Field-Effect Transistor, 1-Element, S Band, Silicon, N-Channel, Metal-oxide Semiconductor FET
RoHS : Compliant

4,508

55A1121-12-9/96-9CS2275

TE Connectivity

Wire And Cable, 12AWG, 600V, Flexible Cord And Fixture Wire
RoHS : Compliant

4,240

DSC1121CE1-124.2000

Microchip Technology Inc

CMOS Output Clock Oscillator, 124.2MHz Nom
RoHS : Compliant

4,131

PCF2112CT/F1,112

NXP Semiconductors

Liquid Crystal Driver, 32-Segment, CMOS, PDSO40

860

Waytek, Inc.

T40R0C2 112-04060

HellermannTyton

HellermannTyton T40R0C22 standard cable tie is a self-locking nylon tie with a 8.5" length for general-purpose wire, cable, hose, and tubing bundling. Its one-piece construction supports reliable fastening, clean harness organization, and everyday use in electrical and equipment applications.

100 : $0.0922
200 : $0.0855
500 : $0.0777
1,000 : $0.0718
5,000 : $0.0684

55,500

T50R9C2 112-05019

HellermannTyton

HellermannTyton T50R9C22 standard cable tie is a self-locking nylon tie with a 7.9" length for general-purpose wire, cable, hose, and tubing bundling. Its one-piece construction supports reliable fastening, clean harness organization, and everyday use in electrical and equipment applications.

100 : $0.0743
200 : $0.0674
500 : $0.0601
1,000 : $0.0547
5,000 : $0.052

25,200

T50L9C2 112-05419

HellermannTyton

HellermannTyton T50L9C2 standard cable tie is a self-locking nylon tie with a 15" length for general-purpose wire, cable, hose, and tubing bundling. Its one-piece construction supports reliable fastening, clean harness organization, and everyday use in electrical and equipment applications.

100 : $0.2019
200 : $0.1918
500 : $0.1784
1,000 : $0.1708

6,800

8911289

Aptiv PLC

Aptiv 8911289 outlet fitting for corrugated loom is a conduit transition component designed to route protected wiring out of split loom. Its formed outlet design helps guide and secure harness exits while maintaining organized cable protection in vehicle and equipment applications.

20 : $2.6319
50 : $2.3461
100 : $2.1292
200 : $2.0601
500 : $1.9911
1,000 : $1.9123

4,157

871-1C-S-D1 12VDC

Song Chuan Precision Company

Song Chuan Micro Relay 35 Amp 12V SPDT Diode (Waytek Disco'd)

1 : $2.6
50 : $2.49
100 : $2.39
500 : $2.29
1,000 : $2.24
2,500 : $2.17

2,850

PC792B-1A-C1-12C-N-X

Picker Components

Mini ISO Relay 12V, SPST 40A, Plastic Bracket Repl#75878 | Sub#75401

1 : $2.9601
10 : $2.615
50 : $2.3115
100 : $2.1024
500 : $1.9666
1,000 : $1.8724

693

PC792H-1A-C1-12C-DNX

Picker Components

Mini ISO Relay 12V SPST 60A NO 40A NC w/Diode & Plastic Bracket

1 : $4.8944
50 : $4.1203
100 : $3.8691
500 : $3.7125
1,000 : $3.5971

327

11-200

Pollak

2-Way Connector Assembly Plug and Socket 12V 15 AMPS Sold as sets only 18 GA Wire

1 : $4.1074
50 : $3.4142
100 : $2.9809
200 : $2.8075
500 : $2.6864

233

875-P1-120-2

Panel Mount High Amp Circuit Breaker, Type III, On-Off 120 Amps, 48VDC

1 : $52.36
5 : $49.36
10 : $47.72
50 : $45.54
100 : $43.36

100

1800-E1-1-2E-0400-12

40A Circuit Breaker 32V ABYC UL Panel Mount Manual Reset UL 1500 SAE J1428 120VAC

1 : $20.49
5 : $18.3
10 : $17.11
50 : $16.11
100 : $15.37
200 : $14.64

175-S1-120-2

120A Push Trip Reset 1/4" Stud Surface S X S Circuit Breaker HI AMP SIDE BY SIDE 46987

1 : $32.03
5 : $28.59
10 : $26.79
50 : $25.3
100 : $24.1
200 : $22.9

171-S1-120-2

120A Auto Reset 1/4" Studs Surface S X S Circuit Breaker HI AMP SIDE BY SIDE 46937

1 : $24.03
5 : $21.45
10 : $20.1
50 : $18.98
100 : $18.08
200 : $17.18

151120

OptiFuse

Surface Mount Circuit Breaker Automatic, 42VDC, 120A

1 : $34.85
10 : $31.43
50 : $28.86
100 : $27.84
200 : $26.99
500 : $26.31

PC792E-1C-C1-12C-RNX

Picker Components

Mini ISO Relay 12V, SPDT 50A NO,40A NC,Resistor,Plastic Brkt, Repl#75862|Sub#75772

1 : $3.9516
50 : $3.136
100 : $2.8744
500 : $2.7071
1,000 : $2.5919

PC792C-1A-C1-12C-N-X

Picker Components

Mini ISO Relay 12V SPST 50A Bracket 75710

1 : $3.3418
50 : $2.6516
100 : $2.4282
500 : $2.2963
1,000 : $2.1947

Win Source Electronics

G5V-2-H1-12VDC

OMRON Corporation

365 : $0.8273
275 : $0.9228
210 : $0.9546
155 : $0.9864
100 : $1.0182
45 : $1.241

300,002

TMP112BIDRLR

Texas Instruments

SENSOR DIGITAL -40C-125C 6SOT
RoHS : Compliant

270 : $1.1182
215 : $1.1637
170 : $1.2091
120 : $1.3
75 : $1.3455
35 : $1.4364

41,830

CC1120RHBR

Texas Instruments

IC RF TXRX+MCU ISM
RoHS : Compliant

230 : $1.3046
185 : $1.3576
142 : $1.4107
99 : $1.5167
64 : $1.5697
30 : $1.6758

30,220

MAAM-011229-TR1000

MACOM

IC RF AMP 50MHZ-4GHZ 8DFN
RoHS : Compliant

55 : $5.5294
41 : $6.1674
32 : $6.3801
23 : $6.5928
15 : $6.8054
7 : $8.2941

28,300

TPA3112D1PWP

Texas Instruments

25-W FILTER-FREE MONO CLASS-D AUDIO POWER AMPLIFIER with SPEAKER GUARD™ | IC AMP AUD PWR 25W MONO 28HTSSOP
RoHS : Compliant

217 : $1.3873
174 : $1.4437
134 : $1.5
94 : $1.6128
60 : $1.6692
29 : $1.782

25,387

TLP112

Toshiba America Electronic Components

Digital Logic Isolation Line Receiver Switching Power Supply Feedback Control Transistor Invertor
RoHS : Not Compliant

102 : $2.9546
76 : $3.2955
59 : $3.4091
43 : $3.5228
28 : $3.6364
12 : $4.4319

15,000

CC1121RHBR/CC1121RHBT

Texas Instruments

65 : $4.6591
52 : $4.8485
40 : $5.0379
28 : $5.4167
18 : $5.6061
9 : $5.9849

12,090

REF1112AIDBZRG4

Texas Instruments

IC VREF SHUNT 1.25V SOT23-3
RoHS : Compliant

121 : $2.4851
91 : $2.7719
70 : $2.8675
51 : $2.963
33 : $3.0586
14 : $3.7277

6,000

TK11233CMCL-GH

Asahi Kasei Microsystems Corporation

RoHS : Compliant

765 : $0.394
570 : $0.4394
440 : $0.4546
320 : $0.4697
210 : $0.4849
85 : $0.591

5,000

PCA21125T/Q900/1

Nexperia

370 : $0.818
275 : $0.9124
215 : $0.9438
155 : $0.9753
100 : $1.0067
45 : $1.2269

5,000

LTC3112EDHD#TRPBF

Linear Technology

IC REG BUCK BOOST ADJ 2.5A 16DFN / Conv DC-DC 2.7V to 15V Synchronous Non-Inverting/Inverting/Step Up/Step Down Single-Out 2.5V to 14V 2.5A 16-Pin DFN EP T/R
RoHS : Compliant

28 : $11.024
21 : $12.296
16 : $12.72
12 : $13.144
8 : $13.568
4 : $16.536

2,350

LT1122DS8#PBF

Linear Technology

IC OPAMP JFET 13MHZ 8SO
RoHS : Compliant

28 : $12.3469
21 : $13.7715
16 : $14.2464
12 : $14.7213
8 : $15.1962
4 : $18.5203

1,987

ALM-31122

Avago Technologies

3.3GHz 3.9GHz 2 Watt High Linearity Amplifier
RoHS : Compliant

2 : $233.5667
2 : $233.5667
2 : $233.5667
1 : $260.5167
1 : $260.5167
1 : $260.5167

1,400