| Electronic Components Datasheet Search |
|
1183AL-12-AF5-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() TME | 2328118-3 | TE Connectivity | Inom: 15A; PIN: 3; for panel mounting; Imax: 15A RoHS : Compliant |
| 9,787 | |
| 1-1833011-8 | TE Connectivity | Relay: electromagnetic; Ucoil: 18VDC; SPST-NO; Icontacts max: 16A RoHS : Compliant |
| 380 | ||
| 2-1617118-3 | TE Connectivity | Relay: electromagnetic; Ucoil: 26VDC; SPDT; signal; PCB; 2kΩ; 2ms RoHS : Not Compliant |
| 10 | ||
| 118-3 | Donau Elektronik | Wire; LiY; stranded; Cu; 0.14mm2; PVC; yellow; 60V; 10m; 1x0.14mm2 |
| 9 | ||
| 11830700 | RAPID | Staples; 6mm; galvanised steel; 5000pcs; TYP 13 |
| 5 | ||
| 10061183 | Essentra Components | Stopper; H: 14.9mm; push-in; Flange dia: 18.5mm; black; LDPE |
| 0 | ||
| 1311830000 | Weidmüller Interface GmbH & Co. KG | RS; 87x95x72mm; 24VDC RoHS : Compliant |
| 0 | ||
| 1511830005 | Weidmüller Interface GmbH & Co. KG | PAC RoHS : Compliant |
| 0 | ||
| 1511830050 | Weidmüller Interface GmbH & Co. KG | PAC RoHS : Compliant |
| 0 | ||
| 1801.1832 | Mentor Graphics | LED; in housing; red/yellow; No.of diodes: 2; 3mm; 20mA; 60° |
| 0 | ||
| 3271183 | Bossard Group | Screw; for metal; 3.9x19; Head: countersunk; Torx®; TX15; zinc |
| 0 | ||
| 1183613 | Bossard Group | Screw; 4x6; Head: cheese head; Pozidriv; PZ2; A2 stainless steel |
| 0 | ||
| 118390-01 | LED2WORK GmbH | Lamp: machine light; 19W; 24VDC; L: 540mm; 800mA; 60000h; 100°; 690lm |
| 0 | ||
| 1511830010 | Weidmüller Interface GmbH & Co. KG | PAC RoHS : Compliant |
| 0 | ||
| 201007F1183T4E | Royal Electronic Factory (Thailand) Co Ltd | Resistor: thick film; 118kΩ; SMD; 2010; 750mW; ±1%; 200V; -55÷125°C RoHS : Compliant |
| 0 | ||
![]() Avnet Americas | ERJ-3EKF1183V | Panasonic Electronic Components | SMD Chip Resistor, 118 kohm, ? 1%, 100 mW, 0603 [1608 Metric], Thick Film - Tape and Reel (Alt: ERJ-3EKF1183V) |
| 15,000 | |
| 2118396-1 | TE Connectivity | 2118396-1 - SHIELD FRAME, MAIN BOARD - Bulk (Alt: 2118396-1) RoHS : Compliant | 10,222 | |||
| ERJ-2RKF1183X | Panasonic Electronic Components | SMD Chip Resistor, 118 kohm, ? 1%, 100 mW, 0402 [1005 Metric], Thick Film - Tape and Reel (Alt: ERJ-2RKF1183X) |
| 10,000 | ||
| ECS-221-18-33-JGN-TR | ECS International Inc | - Tape and Reel (Alt: ECS-221-18-33-JGN-TR) RoHS : Compliant |
| 6,000 | ||
| 5650118-3 | TE Connectivity | - Trays (Alt: 5650118-3) RoHS : Compliant |
| 1,384 | ||
| 77311-118-36LF | Amphenol Corporation | - Bulk (Alt: 77311-118-36LF) RoHS : Compliant |
| 300 | ||
| 766141183GP | CTS Corporation | - Bulk (Alt: 766141183GP) RoHS : Compliant |
| 189 | ||
| 77313-118-34LF | Amphenol Corporation | - Bulk (Alt: 62K9430) RoHS : Compliant |
| 0 | ||
| 1183 | 3M Interconnect | 80611420342 1194 TAPE 7.7 X 10 IN SHEET 3" PAPER - Bulk (Alt: 7000132462) RoHS : Not Compliant |
| 0 | ||
| 77313-118-34LF | Amphenol Corporation | - Bag (Alt: 77313-118-34LF) RoHS : Compliant |
| 0 | ||
| CA11837_LAURA-M-PIN | LEDIL | - Tape and Reel (Alt: CA11837_LAURA-M-PIN) RoHS : Compliant |
| 0 | ||
| B32642H1183K003 | TDK Corporation | - Bulk (Alt: B32642H1183K003) RoHS : Compliant | 0 | |||
| DB1-183LF | Gowanda Electronics Corporation | RADIAL LEADED HIGH CURRENT POWR LINE CHOKE - Bulk (Alt: DB1-183LF) RoHS : Compliant |
| 0 | ||
| 11-18-3002 | Molex | - Bulk (Alt: 0011183002) RoHS : Not Compliant |
| 0 | ||
| 11-18-3165 | Molex | - Bulk (Alt: 0011183165) RoHS : Not Compliant |
| 0 | ||
![]() Newark | WR04X1183FTL | SPC Multicomp | Res, 118K, 1%, 0.0625W, 0402, Thick Film; |Multicomp Pro WR04X1183FTL RoHS : Compliant |
| 5,600 | |
| WR04X1183FTL | SPC Multicomp | Res, 118K, 1%, 0.0625W, 0402, Thick Film; |Multicomp Pro WR04X1183FTL RoHS : Compliant |
| 5,600 | ||
| 77313-118-34LF | Amphenol Communications Solutions | Header, Vert, 34Way; |Amphenol Communications Solutions 77313-118-34LF RoHS : Compliant |
| 888 | ||
| ESW-118-33-G-D | Samtec Inc | Connector, Rcpt, 36Pos, 2Row, 2.54Mm; |Samtec, Inc. ESW-118-33-G-D RoHS : Compliant |
| 60 | ||
| ESW-118-34-T-D | Samtec Inc | Connector, Rcpt, 36Pos, 2Row, 2.54Mm; |Samtec, Inc. ESW-118-34-T-D RoHS : Compliant |
| 60 | ||
| ESQ-118-37-S-D | Samtec Inc | Connector, Rcpt, 36Pos, 2Row, 2.54Mm; |Samtec, Inc. ESQ-118-37-S-D RoHS : Compliant |
| 46 | ||
| PBB-11835-3 | BUD Industries Inc | Push Button Box, Polycarbonate; |Bud Industries PBB-11835-3 RoHS : Compliant |
| 35 | ||
| ESQ-118-33-G-S | Samtec Inc | Socket, 2.54Mm, Vertical Tht, 18Way; |Samtec, Inc. ESQ-118-33-G-S RoHS : Compliant |
| 24 | ||
| 1183-6004 | Amphenol SV Microwave | Rf Adapter, Nanorf-Sma Jack, 50 Ohm; Convert From Coax Type:Nanorf; Convert From Gender:Jack; Convert To Coax Type:Sma; Convert To Gender:Jack; Adapter Body Style:Straight Adapter; Impedance:50Ohm; Connector Type:Inter Series Coaxialrohs Compliant: Yes RoHS : Compliant |
| 11 | ||
| 30118-301 | nVent Schroff | Enclosures And 19Inch Cabinet Racks; |Nvent Schroff 30118-301 RoHS : Compliant |
| 6 | ||
| 211832 | Mitutoyo Corporation | Radius Gauge .950; |Mitutoyo 211832 RoHS : Not Compliant |
| 4 | ||
| 1183 | 3M Interconnect | Tape, Copper Foil, 54Ft X 0.748"; Tape Type:Emi/Rfi Shielding; Tape Width - Imperial:0.748"; Tape Width - Metric:19Mm; Product Range:1183 Series; Body Material:Tin-Plated Copper Foil; Gasket Material:Tin Plated Copper Foil Rohs Compliant: Yes |3M 1183 (Alternate Part Number: 5051439002955 RoHS : Compliant |
| 0 | ||
| 1183 | Keystone Electronics Corp | Acetal Spacer; |Keystone 1183 (Alternate Part Number: 5051439002955 RoHS : Not Compliant |
| 0 | ||
| 1183 | Adafruit Industries | 12Mm Diameter Linear Bearing Pillow Block - Sbr12Uu |Adafruit 1183 (Alternate Part Number: 5051439002955 RoHS : Not Compliant |
| 0 | ||
| 1183 | CEC Industries Ltd | Rp11 Sc Bay 5.5V 6.25A 50Cp |Cec Industries 1183 (Alternate Part Number: 5051439002955 RoHS : Not Compliant |
| 0 | ||
![]() Analog Devices Inc | MAX1183ECM+D | Analog Devices Inc | Dual 10-Bit, 40Msps, 3V, Low-P RoHS : Compliant |
| 4,083 | |
| MAX1183ECM/GG8 | Analog Devices Inc | Dual 10-Bit, 40Msps, 3V, Low-P RoHS : Not Compliant | 0 | |||
| LT1183CS#PBF | Analog Devices Inc | CCFL/LCD Contrast Sw Regs RoHS : Compliant |
| 0 | ||
| LT1183CS#TRPBF | Analog Devices Inc | CCFL/LCD Contrast Sw Regs RoHS : Compliant |
| 0 | ||
| MAX1183ECM+TD | Analog Devices Inc | Dual 10-Bit, 40Msps, 3V, Low-P RoHS : Compliant |
| 0 | ||
| 118329-HMC627ALP5 | Analog Devices Inc | HMC627ALP5E EVALUATION PCB ASS RoHS : Compliant |
| 0 | ||
![]() RS | ERJ-3EKF1183V-CUT TAPE | Panasonic Electronic Components | RESISTOR, THICK FILM, RES 118 KILOHMS, PWR-RTG 0.1 W, TOL 1%,SMT,0603,CUT TAPE |
| 93,375 | |
| 1SNA118368R1600 (011836816) | TE Connectivity | TERMINAL BLOCK END SECTION, POLYAMIDE, 4.8MMW X 41.2MMH X 36.7MML, SNA SERIES |
| 1,803 | ||
| 8971183 | RS Pro | TERMINAL BLOCK HEADER RIGHT ANGLE PCB MOUNT 2 CONTACT 1 ROW 5MM THROUGH HOLE |
| 280 | ||
| VS-1N1183 | Vishay Intertechnologies | DIODE, RECTIFIER, VR 50V, IF 35A, PKG DO-203AB (DO-5),CONFIG COMMON CATHODE, VF 1.7V RoHS : Compliant |
| 53 | ||
| R161183000W | Radiall | RF CONNECTOR N M RA CR 5/50D RoHS : Compliant |
| 30 | ||
| 3842541183 | Bosch Rexroth | CONNECTOR PARALLEL, FIXED CONNECTOR, ECOSHAPE TUBULAR FRAMING SYSTEM |
| 20 | ||
| 8118389 | RS Pro | PUSH BUTTON SWITCH 16MM SPDT LATCHING 250VAC 3A NON-ILLUMINATED QC TABS |
| 16 | ||
| 8118370 | RS Pro | PUSH BUTTON SWITCH 16MM SPDT MOMENTARY 250VAC 3A NON-ILLUMINATED QC TABS |
| 11 | ||
| 66254461183 | Norton Winter | BLUEFIRE FIBERGLASS CONICAL FLAP DISC T29 P40 GRIT R884P ZA, 7 X 7/8 IN. |
| 10 | ||
| 1183-3/4"X18YD (7000132708) | 3M | TAPE, SHIELDING, COPPER FOIL, EMI TIN-PLATED, 0.75 IN., 18 YDS, 2.6 MILS |
| 9 | ||
| 2011837 | RS Pro | ATX POWER SUPPLY PC 3.3V@18A, 5V@17A, 12V@38A 500W 200-240VAC PANEL MOUNT |
| 5 | ||
| 93601-1831 | Woodhead Molex | HEAVY DUTY CONNECTOR, GWCONNECT, 10B STD HOOD WITH GASKET 1LEV HC T/E M32 |
| 5 | ||
| 1600118 (1600118/328) | Lapp Group | FLEXIBLE CABLE, 3 CONDUCTOR, 14AWG, UNSHIELDED, 328 FT, NEOPRENE, H07RN-F SERIES |
| 5 | ||
| 2351183 | RS Pro | ISO 6432 CYLINDER 25MM BORE X 25MM STROK |
| 1 | ||
| 1183 | Adafruit Industries | 12MM DIAMETER LINEAR BEARING PILLOW BLOCK - SBR12UU |
| 0 | ||
![]() Microchip Technology Inc | 1N1183 | Microchip Technology Inc | Std Rectifier _ DO-5, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | |
| 1N1183A | Microchip Technology Inc | Std Rectifier _ DO-5, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| 1N1183R | Microchip Technology Inc | Std Rectifier _ DO-5, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| 1N1183AR | Microchip Technology Inc | Std Rectifier _ DO-5, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| MV31011-183 | Microchip Technology Inc | GaAs TVAR Hermetic SMT, Projected EOL: 2046-08-15 - Contact for Pricing | 0 | |||
![]() Bisco Industries | 1118355 | Unbrako Group | 3,900 | |||
| 1118338 | Unbrako Group | 3,600 | ||||
| 1183 | Zierick Manufacturing Corporation | 484 | ||||
| 1911-832-AL | RAF Electronic Hardware | 71 | ||||
| 2211-832-AL-6 | RAF Electronic Hardware | 48 | ||||
| 11-83 | MISCELLANEOUS | 38 | ||||
| 1183-10-AL | RAF Electronic Hardware | 17 | ||||
| 025-1183-000 | ITT Interconnect Solutions | 9 | ||||
| 3339-4-41-18320 | MISC. LEDS | 9 | ||||
| 8111-832-SS-20 | RAF Electronic Hardware | 5 | ||||
| 30118-342 | nVent Schroff | RoHS : Compliant | 5 | |||
| PF11-832-2BL | PennEngineering (PEM) | 4 | ||||
| PF11-832-0 | PennEngineering (PEM) | 2 | ||||
| 11833-SS-3724-7 | Amatom Electronic Hardware | 2 | ||||
| 11183341 | HINGES | 1 | ||||
![]() Rochester Electronics | MAX1183ECM/GG8 | Analog Devices Inc | IC ADC 2 CONV 10Bits Pipelined Parallel 48-QFP Tray RoHS : Not Compliant | 234 | ||
TPS61183RTJT![]() | Texas Instruments | LED Driver ICs DC DC Regulator 30mA 20-QFN T/R RoHS : Compliant |
| 87,147 | ||
TLV7111830DSET![]() | Texas Instruments | IC VOLT REG Fixed 2 REG 1.8V, 3V 200mA 6-SON T/R RoHS : Compliant |
| 250 | ||
| TIL118-3 | Texas Instruments | Opto-coupler 3.53kVrms Transistor 6-DIP Tube RoHS : Not Compliant |
| 3,208 | ||
TPS61183RTJR![]() | Texas Instruments | LED Driver ICs DC DC Regulator 30mA 20-QFN T/R RoHS : Compliant |
| 1,093,451 | ||
| MAX11835EWA+T | Maxim Integrated Products | Motor Driver ICs Controller - Commutation, Direction Management 25-BGA T/R RoHS : Compliant |
| 7,500 | ||
| MAX11836EWA+ | Maxim Integrated Products | Touch Screen Controller I²C, Serial 8Bits 2.7V 25-BGA RoHS : Compliant |
| 864 | ||
| MAX11836EWA+T | Maxim Integrated Products | Touch Screen Controller I²C, Serial 8Bits 2.7V 25-BGA T/R RoHS : Compliant |
| 32,500 | ||
| MIC5211-1.8/3.3BM6 | Micrel Inc | IC VOLT REG Fixed 2 REG 1.8V, 3.3V 80mA, 80mA SOT-23-6 RoHS : Not Compliant |
| 19,548 | ||
| HA118326APF-E | Renesas Electronics Corporation | AV Switch RoHS : Compliant |
| 1,731 | ||
![]() Sager | 1183 | Keystone Electronics Corp | Keystone Electronics Acetal Spacer |
| 0 | |
| D-181-1830-6/9CS298 | TE Connectivity | TE Connectivity | 0 | |||
| 1183988 | Phoenix Contact | Fiber Optic Cable Assemblies FOC-17P24-17P24-GL03/45 RoHS : Compliant |
| 0 | ||
| 0011183136 | Molex | Molex | 0 | |||
| 0011183181 | Molex | Molex K60835B TOOL KIT |
| 0 | ||
| 0011183217 | Molex | Molex | 0 | |||
| 203-11-8322-3 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| 2118309-1 | TE Connectivity | Antennas 120MM 1.13 CBL WLAN DUAL BAND ANTENNA RoHS : Compliant |
| 0 | ||
| ESQ-118-34-L-T | Samtec Inc | PC / 104 Connectors RoHS : Compliant | 0 | |||
| ESQ-118-39-G-T | Samtec Inc | PC / 104 Connectors RoHS : Compliant | 0 | |||
| 70151-1831 | ARATAS Americas | DIP Switches / SIP Switches SGE-125-0-0560N 00800C-00800C | 0 | |||
| YAFD51-18-30SYC019 | TE Connectivity | TE Connectivity RECP ASSY | 0 | |||
| P5-118324 | OTTO Engineering Inc | SEALED, MIL GRADE, ALTERNATE ACTION, PUSHBUTTON SWITCH RoHS : Compliant |
| 0 | ||
| FCF8-10-01-L-11.83-S | Samtec Inc | Ribbon Cables / IDC Cables |
| 0 | ||
| ESQ-118-33-G-T | Samtec Inc | PC / 104 Connectors RoHS : Compliant | 0 | |||
![]() Coilcraft Direct | MSS7341-183MLD | Coilcraft Inc | Power inductor, shielded, 10/20/30% tol, SMT, RoHS RoHS : Compliant |
| 2,478 | |
| MSS5131-183MLC | Coilcraft Inc | Power inductor, shielded, 20% tol, SMT, RoHS RoHS : Compliant |
| 2,254 | ||
| MSS7331-183MLC | Coilcraft Inc | Power inductor, shielded, 20/30% tol, SMT, RoHS RoHS : Compliant |
| 818 | ||
| MSS5121-183MLC | Coilcraft Inc | Power inductor, shielded, 20% tol, SMT, RoHS RoHS : Compliant |
| 409 | ||
| WB1.18-3SLD | Coilcraft Inc | Wideband RF transformer, SMT, RoHS RoHS : Compliant |
| 225 | ||
| WB1.18-3L | Coilcraft Inc | Wideband RF transformer, RoHS RoHS : Compliant |
| 9 | ||
![]() ComSIT USA | TPL1183525262J261 | TDK Corporation | AVAILABLE EU | 15,000 | ||
![]() ComSIT USA | MCR01MZPF1183 | ROHM Semiconductor | GENERAL PURPOSE CHIP RESISTOR Fixed Resistor, Metal Glaze/thick Film, 0.063W, 118000ohm, 50V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0402 RoHS : Compliant | 30,000 | ||
| RF1183000 | Littelfuse Inc | POLYSWITCH RESETTABLE DEVICE PTC Resettable Fuse RoHS : Compliant | 9,000 | |||
| B82422A1183J100V3 | TDK Electronics | SMT INDUCTOR General Purpose Inductor, 18uH, 5%, 1 Element, Ferrite-Core, SMD, 1210 RoHS : Compliant | 6,000 | |||
| SMM02040C1183FB300 | Vishay Intertechnologies | THIN FILM MINI MELF RESISTOR Fixed Resistor, Thin Film, 0.25W, 118000ohm, 200V, 1% +/-Tol, 50ppm/Cel, Surface Mount, 1406 RoHS : Compliant | 1,771 | |||
TLV7111833DDSET![]() | Texas Instruments | LOW-IQ LOW-DROPOUT REGULATOR FOR PORTABLE DEVICE Fixed Positive LDO Regulator, 2 Output, 1.8V1, 3.3V2, CMOS, PDSO6 RoHS : Compliant | 500 | |||
| IRS211834PBF | International Rectifier | Electronic Component RoHS : Compliant | 75 | |||
| ISP1183BS | Philips E C G Inc | Bus Controller, PQCC32 RoHS : Not Compliant | 40 | |||
![]() Interstate Connecting Components | CT0-1118-32D3/4BS4CE | MISC MIL-AERO | KERN | 1 | ||
| 77313-118-34LF | Amphenol FCi | BERGSTIK HDR DR STR-77313-118- RoHS : Unknown | 0 | |||
| 1183-6004 | Amphenol SV Microwave | NanoRF Plug-In Cont VITA 6 Cont (0 VITA) RoHS : Compliant |
| 0 | ||
| 025-1183-000 | ITT Interconnect Solutions | CAP,PROT.COND. BKW3-PLUG BULKK | 0 | |||
| 2118309-1 | TE Connectivity | DUAL BAND WIFI, 2.4 & 5GHZ, PC RoHS : Compliant |
| 0 | ||
| 260-002-71Z118-32PZ | Glenair Inc | RoHS : Compliant | 0 | |||
| 260-002-74Z118-32BY | Glenair Inc | RoHS : Compliant | 0 | |||
| 260-002-75Z118-30SY | Glenair Inc | RoHS : Compliant | 0 | |||
| 260-002-75Z118-32B | Glenair Inc | RoHS : Compliant | 0 | |||
| 260-002-76Z118-30PY | Glenair Inc | RoHS : Compliant | 0 | |||
| ZPF000000000118311 | TE Connectivity | MALE INSERT 12POLES | 0 | |||
| ZPF000000000118348 | TE Connectivity | SOCKET DIA2 - SILVER - BRASS C | 0 | |||
| UTS11832P | SOURIAU-SUNBANK | 0 | ||||
| 260-002-70Z118-30SX | Glenair Inc | RoHS : Compliant | 0 | |||
| 260-002-75Z118-30BZ | Glenair Inc | RoHS : Compliant | 0 | |||
![]() NexGen Digital | ERJ-2RKF1183 | Panasonic Electronic Components | 10,000 | |||
| ERJ-3EKF1183V | Panasonic Electronic Components | 200 | ||||
| PVA1183C-LF | Z-Communications Inc | 49 | ||||
| SFS1183C-LF | Z-Communications Inc | 16 | ||||
![]() PEI Genesis | GTC01-18-3PY-B30 | Amphenol Corporation |
| 40 | ||
| GTC01-18-3P-B30-LC | Amphenol Corporation |
| 40 | |||
| GTC01-18-3PZ | Amphenol Corporation |
| 40 | |||
| GTC01-18-3PY | Amphenol Corporation |
| 40 | |||
| GTC01-18-3PY-B30-LC | Amphenol Corporation |
| 40 | |||
| GTC01-18-3PW-B30-LC | Amphenol Corporation |
| 40 | |||
| GTC01-18-3PX-B30-LC | Amphenol Corporation |
| 40 | |||
| GTC01-18-3PW-B30 | Amphenol Corporation |
| 40 | |||
| GTC01-18-3PW-LC | Amphenol Corporation |
| 40 | |||
| GTC01-18-3PZ-B30-LC | Amphenol Corporation |
| 40 | |||
| GTS01-18-3P-116 | Amphenol Corporation |
| 0 | |||
| M10-117931-183 | Amphenol Corporation |
| 0 | |||
| GTS01-18-3PZ-116 | Amphenol Corporation |
| 0 | |||
| GTS01-18-3P | Amphenol Corporation |
| 0 | |||
| GTS01-18-3PW-116 | Amphenol Corporation |
| 0 | |||
![]() Powell Electronics | 2118326-1 | TE Connectivity | Antennas RoHS : Compliant |
| 4,113 | |
| ESW-118-33-G-D | Samtec Inc | .100 Elevated Skt Strip RoHS : Compliant |
| 40 | ||
| ESW-118-34-T-D | Samtec Inc | .100" Elevated Socket Strip RoHS : Compliant |
| 40 | ||
| ESW-118-33-S-D | Samtec Inc | .100" Elevated Socket Strip RoHS : Compliant |
| 40 | ||
| ESQ-118-37-S-D | Samtec Inc | Elevated Socket Strip, 0.100" Pitch RoHS : Compliant |
| 30 | ||
| GTC01-18-3PY-B30 | Amphenol Corporation | CONNECTOR |
| 26 | ||
| GTC01-18-3P-B30-LC | Amphenol Corporation | CONNECTOR |
| 26 | ||
| GTC01-18-3PZ | Amphenol Corporation | CONNECTOR |
| 26 | ||
| GTC01-18-3PY | Amphenol Corporation | CONNECTOR |
| 26 | ||
| 1183-6004 | Amphenol SV Microwave | NanoRF Plug-In Contact VITA 67.3 to SMA RoHS : Compliant |
| 17 | ||
| 10111838-S444ALF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 17 | ||
| ESQ-118-39-G-S | Samtec Inc | Elevated Socket Strip, 0.100" Pitch RoHS : Compliant |
| 17 | ||
| ESQ-118-39-L-S | Samtec Inc | Elevated Socket Strip, 0.100" Pitch RoHS : Compliant |
| 17 | ||
| ESQ-118-33-G-S | Samtec Inc | Elevated Socket Strip, 0.100" Pitch RoHS : Compliant |
| 16 | ||
| 5650118-3 | TE Connectivity | Card Edge Connectors RoHS : Compliant |
| 10 | ||
![]() Rutronik | CR10-1183-FN | ASJ Holdings Limited | RC0402 118K 1% 0,063W TK100 RoHS : Compliant |
| 250,000 | |
| CR21-183-JL | ASJ Holdings Limited | RC0805 18K 5% 0,125W TK100 RoHS : Compliant |
| 145,000 | ||
| PH1-02-VM-.118/.335-L-HT | Adam Technologies Inc | 02P Pin Header 1R 2.54mm HighTemp GOLD RoHS : Compliant |
| 14,000 | ||
![]() Chip 1 Exchange | CR10-1183-F# | ASJ Holdings Limited | INSTOCK | 19,587 | ||
| MF60SS-1183F-A5 | ASJ Holdings Limited | INSTOCK | 5,000 | |||
| 7118-3320 | Yazaki Corp | INSTOCK | 3,527 | |||
| 7118-3110 | SUMITOMO ELECTRIC Interconnect Products | INSTOCK | 1,280 | |||
| B82442-A1183-K | Siemens | INSTOCK | 393 | |||
| 7584411832 | Amphenol FCi | INSTOCK | 265 | |||
| 77311-118-36LF | INSTOCK | 100 | ||||
| 211839-1 | TE Connectivity | INSTOCK RoHS : Compliant | 84 | |||
| EC3A21 (18-36UDC) | Cincon Electronics Corporation | INSTOCK | 81 | |||
![]() Avnet Abacus | 39281183 | Molex | (Alt: 39281183) RoHS : Compliant | 32,000 | ||
| 2271183-1 | TE Connectivity | (Alt: 2271183-1) RoHS : Compliant | 11,000 | |||
| MMU01020C1183FB300 | Vishay Intertechnologies | - Tape and Reel (Alt: MMU01020C1183FB300) RoHS : Compliant | 6,000 | |||
| 39281183 | Molex | (Alt: 39281183) RoHS : Compliant | 9 | |||
| 1183988 | Phoenix Contact | FOC17P2417P24GL0345 FOC17P2417P24GL0345 (Alt: 1183988) RoHS : Compliant | 0 | |||
| 30118344 | nVent Schroff | Front Panel Unshielded Aluminum 4 HP Width 3 U Height (Alt: 30118344) RoHS : Compliant | 0 | |||
| 2118309-1 | TE Connectivity | PCB Antenna Dual Band Linear 24 GHz to 25 GHz 49 GHz to 5875 GHz Adhesive Mount (Alt: 2118309-1) RoHS : Compliant | 0 | |||
| 2118309-1 | TE Connectivity | PCB Antenna Dual Band Linear 24 GHz to 25 GHz 49 GHz to 5875 GHz Adhesive Mount (Alt: 2118309-1) RoHS : Compliant | 0 | |||
| BFC234741183 | Vishay Intertechnologies | Film Capacitor 0018 uF 80 V 10 250 V PET Radial Box 2 Pin (Alt: BFC234741183) RoHS : Compliant | 0 | |||
| 77311-118-36 | Amphenol Corporation | Conn Unshrouded Header HDR 36 POS 254mm Solder ST ThruHole Bag (Alt: 77311-118-36) RoHS : Not Compliant | 0 | |||
| BFC246951183 | Vishay Intertechnologies | Film Capacitor 0018 uF 220 V 400 V 10 Metallized PET Radial Box 2 Pin (Alt: BFC246951183) RoHS : Compliant | 0 | |||
| 4816P-1-183LF | Bourns Inc | Resistor Network 18 kOhm 2 128 W 8 Resistors Isolated SOM Gull Wing Surface Mount - Tape and Reel (Alt: 4816P-1-183LF) RoHS : Compliant | 0 | |||
| 77313-118-34LF | Amphenol Corporation | Conn Unshrouded Header HDR 34 POS 254mm Solder ST ThruHole Poly Bag (Alt: 77313-118-34LF) RoHS : Compliant | 0 | |||
| 766161183GPTR13 | CTS Corporation | Fixed Network Resistor 18 kohm Bussed 15 Resistors Gull Wing 2 50 V 120 mW 100ppmC - Tape and Reel (Alt: 766161183GPTR13) RoHS : Compliant | 0 | |||
| 4606X-101-183LF | Bourns Inc | (Alt: 4606X-101-183LF) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 2118310-2 | TE Connectivity | (Alt: 2118310-2) RoHS : Compliant |
| 600 | |
| 0039281183 | Molex | Pin Header, 18 Contacts, 2 Rows, 4.2mm, Tin, 9A, Straight, Shrouded, Brass, Wire-to-Board, THT (Alt: 0039281183) RoHS : Compliant | 0 | |||
| 77311-118-36LF | Amphenol Corporation | (Alt: 77311-118-36LF) RoHS : Compliant | 0 | |||
| MAL211838109E3 | Vishay Intertechnologies | Electrolytic Capacitor, 10 uF, 63 V, ? 20%, Axial Leaded, 4000 hours @ 125?C, Polar, Axial Leaded (Alt: MAL211838109E3) RoHS : Compliant |
| 0 | ||
| 77311-838-02LF | Amphenol Corporation | BASICS,BERGSTIK HDR V/T 2P (Alt: 77311-838-02LF) RoHS : Compliant | 0 | |||
| 77311-838-06LF | Amphenol Corporation | (Alt: 77311-838-06LF) RoHS : Compliant | 0 | |||
| 1-2118309-1 | TE Connectivity | (Alt: 1-2118309-1) RoHS : Compliant | 0 | |||
| ERJ2RKF1183X | Panasonic Electronic Components | SMD Chip Resistor, 118 kohm, ? 1%, 100 mW, 0402 [1005 Metric], Thick Film (Alt: ERJ2RKF1183X) RoHS : Compliant | 0 | |||
| RK73H1JTTD1183F | KOA Speer Electronics Inc | SMD RES 0603 118K-OHM +-1% (Alt: RK73H1JTTD1183F) RoHS : Compliant | 0 | |||
| ERJ1GNF1183C | Panasonic Electronic Components | (Alt: ERJ1GNF1183C) RoHS : Compliant | 0 | |||
| 1-2118309-2 | TE Connectivity | (Alt: 1-2118309-2) RoHS : Compliant | 0 | |||
| 2118309-1 | TE Connectivity | PCB Antenna, Dual Band, Linear, 2.4 GHz to 2.5 GHz, 4.9 GHz to 5.875 GHz, Adhesive Mount (Alt: 2118309-1) RoHS : Compliant | 0 | |||
| 2118308-8 | TE Connectivity | PCB Antenna, Multi Band, Linear, 698 MHz to 960 MHz, 1.71 GHz to 2.17 GHz, 2.3 GHz to 2.7 GHz, Adhesive Mount (Alt: 2118308-8) RoHS : Compliant | 0 | |||
![]() Avnet Silica | CA11837_LAURA-M-PIN | LEDIL | Square Lens Assembly For LUXEON H502 Oslon Square PC NF2x757D Oslon SSL 150 XPEHEW XPE2 LED (Alt: CA11837_LAURA-M-PIN) RoHS : Compliant | 4,320 | ||
| 20-101-1183 | Digi International Inc | USB Programming Cable with 127 mm Connectors (Alt: 20-101-1183) RoHS : Compliant | 0 | |||
| 2JW1183-C952B | 2J USA | External Antenna Whip Dipole Multi Band 617MHz to 960MHz 1427GHz to 269GHz 33GHz to 5GHz (Alt: 2JW1183-C952B) RoHS : Compliant | 0 | |||
| RAA211835GSP#HA0 | Renesas Electronics Corporation | (Alt: RAA211835GSP#HA0) RoHS : Not Compliant | 0 | |||
| RAA211835GSP#HA0 | Renesas Electronics Corporation | (Alt: RAA211835GSP#HA0) RoHS : Compliant | 0 | |||
| CA11183_BROOKE-W | LEDIL | Brooke Reflectors For Bridgelux BXRA CNW 080012002000 Series Of LEDs (Alt: CA11183_BROOKE-W) RoHS : Compliant | 0 | |||
| RAA211835GNP#HA0 | Renesas Electronics Corporation | (Alt: RAA211835GNP#HA0) RoHS : Compliant | 0 | |||
| RTKA211835DE0000BU | Renesas Electronics Corporation | (Alt: RTKA211835DE0000BU) RoHS : Compliant | 0 | |||
| RTKA211835DE0010BU | Renesas Electronics Corporation | (Alt: RTKA211835DE0010BU) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | AISR-01-183J | Abracon Corporation | RoHS : Compliant |
| 0 | |
![]() Component Electronics, Inc | CR0805F1183T1LF | Chip Technologies Inc | IN STOCK SHIP TODAY |
| 20,000 | |
| CR0805F1183T1 | Chip Technologies Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 11,500 | ||
| CR21A1183FT | IBS Electronics Inc | IN STOCK SHIP TODAY |
| 10,000 | ||
| CR0603F1183T1LF | Chip Technologies Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 5,000 | ||
| MCR18EZHF1183 | ROHM Semiconductor | IN STOCK SHIP TODAY RoHS : Compliant |
| 4,500 | ||
| 9C06031A1183FKPFT | YAGEO Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 4,470 | ||
| H1183T | Halo Electronics Inc | IN STOCK SHIP TODAY | 552 | |||
| 0118.368.16 | TE Connectivity | IN STOCK SHIP TODAY |
| 176 | ||
| ERJ-2RKF1183X | Panasonic Electronic Components | IN STOCK SHIP TODAY |
| 100 | ||
| 0039281183 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 64 | ||
| 39-28-1183 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 64 | ||
| H1183 | Halo Electronics Inc | IN STOCK SHIP TODAY | 10 | |||
| 1SNA118368R1600 | ABB Low Voltage Products and Systems | IN STOCK SHIP TODAY |
| 7 | ||
| JAN2N1183B | Coto Technology USA | IN STOCK SHIP TODAY |
| 3 | ||
| JAN2N1183B | IN STOCK SHIP TODAY |
| 1 | |||
![]() DB Roberts | PF11-832-0 | PennEngineering (PEM) | Shoulder on retainer provides positive stop during installation.Available in self-clinching flaring or floating mounting styles.Available with knurled or un-knurledmetal cap black metal cap or a custom color plastic cap. |
| 108 | |
| 4611-832-AL | RAF Electronic Hardware | 0 | ||||
| OPT2-3118-335 | SHEREX FASTENING SO | 0 | ||||
| 8111-832-SS-20 | RAF Electronic Hardware | 0 | ||||
| CAL2-3118-312BS | SHEREX FASTENING SO | 0 | ||||
| M1118-3005-AL-40 | RAF Electronic Hardware | 0 | ||||
| M2118-3005-S | RAF Electronic Hardware | 0 | ||||
| 8111-832-A-35 | RAF Electronic Hardware | 0 | ||||
| PF11-832-2BL | PennEngineering (PEM) | Shoulder on retainer provides positive stop during installation.Available in self-clinching flaring or floating mounting styles.Available with knurled or un-knurledmetal cap black metal cap or a custom color plastic cap. | 0 | |||
| 11833-21404 | Avdel | BRIV RIVCART 18 MH BR 01833-08 | 0 | |||
| 8111-832-A-33 | RAF Electronic Hardware | 0 | ||||
| 8111-832-S-26 | RAF Electronic Hardware | 0 | ||||
| 1183-8-A-7 | RAF Electronic Hardware | 0 | ||||
| CAH2-3118-312T | SHEREX FASTENING SO | 0 | ||||
| 2111-832-AL | RAF Electronic Hardware | HEX FEMALE STANDOFFS 1/4 HEX X 15/16 LENGTH | 0 | |||
![]() EBV Elektronik | 1N1183A | Microchip Technology Inc | Std Rectifier DO5 (Alt: 1N1183A) RoHS : Not Compliant | 0 | ||
| CA11183_BROOKE-W | LEDIL | Brooke Reflectors For Bridgelux BXRA CNW 080012002000 Series Of LEDs (Alt: CA11183_BROOKE-W) RoHS : Compliant | 0 | |||
| CA11837_LAURA-M-PIN | LEDIL | Square Lens Assembly For LUXEON H502 Oslon Square PC NF2x757D Oslon SSL 150 XPEHEW XPE2 LED (Alt: CA11837_LAURA-M-PIN) RoHS : Compliant | 0 | |||
| CA11837_LAURA-M-PIN-WHT | LEDIL | Accessories for LEDs Lens Cooling (Alt: CA11837_LAURA-M-PIN-WHT) RoHS : Compliant | 0 | |||
![]() Master Electronics | 2118309-1 | TE Connectivity | OMNI PCB Antenna - 4.9GHz to 5.875GHz - 2VSWR - 2.4dBi Gain - Linear Polarization - Adhesive. RoHS : Compliant |
| 810 | |
| TSW-118-30-L-T | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 155851-1832 | ITT Interconnect Solutions | Connector Miniature Circular Socket 7 Position Crimp Straight Cable Mount 7 Terminal 1 Port RoHS : Compliant |
| 0 | ||
| 100-00111836 | Carling Technologies | T-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | ||
| XP-7000-1183-4 | 3M Interconnect | RoHS : Compliant |
| 0 | ||
| 1183988 | Phoenix Contact | FOC-17P24-17P24-GL03/45 RoHS : Compliant |
| 0 | ||
| 025-1183-000 | ITT Interconnect Solutions | CAP PROT.COND. BKW3-PLUG **BULK*KNG2* / 025-1183-000 / Rack & Panel RoHS : Compliant |
| 0 | ||
| ERJ-P6WF1183V | Panasonic Electronic Components | Anti-Surge Thick Film Resistor - 118kohm ±1% - 0.50W - 0806 - Tape&Reel RoHS : Compliant |
| 0 | ||
| ERJ-S08F1183V | Panasonic Electronic Components | Res Thick Film 1206 118K Ohm 1% 0.25W(1/4W) A±100ppm/A°C Sulfur Resistant Pad SMD Automotive T/R RoHS : Compliant |
| 0 | ||
| ESQ-118-34-L-S-LL | Samtec Inc | RoHS : Compliant |
| 0 | ||
| ESQ-118-39-G-T | Samtec Inc | Conn Elevated Socket SKT 54 POS 2.54mm Solder ST Thru-Hole RoHS : Compliant |
| 0 | ||
| 63485-1183 | Molex | Tools and Accessories Cut-off Punch Tool RoHS : Compliant |
| 0 | ||
| FW-02-03-H-D-211-183 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-S-D-111-183 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FCF8-10-01-L-11.83-S | Samtec Inc | RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 1-1393118-3 | TE Connectivity | Industrial Relays KUP-14D15-12 RoHS : Compliant |
| 50 | |
| 21033211831 | HARTING Technology Group | M12 A-code 8pin male straight pcb mount, screened version + front mount housing RoHS : Compliant |
| 50 | ||
| ATS-1183-C1-R0 | Advanced Thermal Solutions Inc | Heat Sinks MAXIFLOW 1/8 BRICK 23 X 58 X 6.1 (MM) RoHS : Compliant |
| 48 | ||
21038211830![]() | HARTING Technology Group | Circular Metric Connectors M12 PUSHPULL 8-POLE A-CODED MALE RoHS : Compliant |
| 27 | ||
| P5-118321 | OTTO Engineering Inc | Pushbutton Switches Press Fit 10A SPDT Gold Cmrcl RoHS : Compliant |
| 10 | ||
| P5-118325 | OTTO Engineering Inc | Pushbutton Switches Press Fit 10A SPDT Gold Cmrcl RoHS : Compliant |
| 10 | ||
| P5-118329 | OTTO Engineering Inc | Pushbutton Switches Alternate Action Pushbutton Switch RoHS : Compliant |
| 10 | ||
| 21038611830 | HARTING Technology Group | Circular Metric Connectors M12 Y-code PushPull 8pin male shielded crimp straight for cable 5.7mm-8.8mm RoHS : Compliant |
| 5 | ||
| ATS-EXL118-300-R0 | Advanced Thermal Solutions Inc | Heat Sinks PCIe Extrusion Profile, AL6063, 300mm Length, 51mm Width, 12mm Height |
| 4 | ||
| RPA-DP1-1, 83388 | Banner Engineering Corp | Banner Engineering RPA-DP1-1 Rpa-Dp1-1 Rope Pull ACcess Deflection Pulley |
| 1 | ||
| 1183807 | Phoenix Contact | Patch cable, 2pos, 1m, Crimp connection, SPE-T1-CCP-SF/1,0/AWG22/CCP-SF RoHS : Compliant |
| 0 | ||
| 1183811 | Phoenix Contact | Ethernet Cables / Networking Cables SPE-T1-CCP-SF/5,0/AWG22/CCP-SF RoHS : Compliant |
| 0 | ||
| 1118305 | Phoenix Contact | Heat Sinks ICE50-R122X67-A1 |
| 0 | ||
| 1183808 | Phoenix Contact | Ethernet Cables / Networking Cables SPE-T1-CCP-SF/2,0/AWG22/CCP-SF RoHS : Compliant |
| 0 | ||
| 2941183 | Phoenix Contact | Industrial Relays 5V AC/DC N/O RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3W11838-50CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SHV, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SHV, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length, Max: 19.68 inches. SHV Jack Bulkhead to SHV Jack Bulkhead Cable Using RG188 Coax In 50 CM Length., Radio frequency assembly SHV jack bulkhead to SHV jack bulkhead cable using RG188 coax in 50 cm length from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SHV jack bulkhead to SHV jack bulkhead cable using RG188 coax in 50 cm length, SHV cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SHV to SHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SHV bulkhead cable connection on one end and SHV bulkhead cable connection on the other. Our SHV to SHV cable assemblies have a jack gender on end 1 and jack on end 2. This SHV to SHV cable is a jack to jack coax assembly, PE3W11838-50CM, can also be known as a SHV female to SHV female cable assembly and will be shipped same-day as it is purchased. SHV female to SHV female cable assembly PE3W11838-50CM is built with RG188 which is a flexible coax type. The Pasternack flexible SHV cable assembly is manufactured with SHV to SHV cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SHV jack bulkhead to SHV jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SHV female bulkhead to SHV female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SHV to SHV cable assembly for quick shipment worldwide. Variations of SHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SHV jack bulkhead to SHV jack bulkhead cable using RG188 coax in 50 cm length. |
| 96 | |
| PE3W11838-150CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SHV, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SHV, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length, Max: 59.06 inches. SHV Jack Bulkhead to SHV Jack Bulkhead Cable Using RG188 Coax In 150 CM Length., Radio frequency assembly SHV jack bulkhead to SHV jack bulkhead cable using RG188 coax in 150 cm length from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SHV jack bulkhead to SHV jack bulkhead cable using RG188 coax in 150 cm length, SHV cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SHV to SHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SHV bulkhead cable connection on one end and SHV bulkhead cable connection on the other. Our SHV to SHV cable assemblies have a jack gender on end 1 and jack on end 2. This SHV to SHV cable is a jack to jack coax assembly, PE3W11838-150CM, can also be known as a SHV female to SHV female cable assembly and will be shipped same-day as it is purchased. SHV female to SHV female cable assembly PE3W11838-150CM is built with RG188 which is a flexible coax type. The Pasternack flexible SHV cable assembly is manufactured with SHV to SHV cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SHV jack bulkhead to SHV jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SHV female bulkhead to SHV female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SHV to SHV cable assembly for quick shipment worldwide. Variations of SHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SHV jack bulkhead to SHV jack bulkhead cable using RG188 coax in 150 cm length. |
| 32 | ||
| PE3W11838-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SHV, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SHV, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length, Max: 78.74 inches. SHV Jack Bulkhead to SHV Jack Bulkhead Cable Using RG188 Coax In 200 CM Length., Radio frequency assembly SHV jack bulkhead to SHV jack bulkhead cable using RG188 coax in 200 cm length from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SHV jack bulkhead to SHV jack bulkhead cable using RG188 coax in 200 cm length, SHV cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SHV to SHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SHV bulkhead cable connection on one end and SHV bulkhead cable connection on the other. Our SHV to SHV cable assemblies have a jack gender on end 1 and jack on end 2. This SHV to SHV cable is a jack to jack coax assembly, PE3W11838-200CM, can also be known as a SHV female to SHV female cable assembly and will be shipped same-day as it is purchased. SHV female to SHV female cable assembly PE3W11838-200CM is built with RG188 which is a flexible coax type. The Pasternack flexible SHV cable assembly is manufactured with SHV to SHV cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SHV jack bulkhead to SHV jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SHV female bulkhead to SHV female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SHV to SHV cable assembly for quick shipment worldwide. Variations of SHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SHV jack bulkhead to SHV jack bulkhead cable using RG188 coax in 200 cm length. |
| 24 | ||
| PE3M0118-30 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/28-RG058-0XDS2, RF Cable Type: M17/28-RG058, RF Cable Impedance: 50 Ohm, Length: 30 inches. MIL-DTL-17 BNC Male to TNC Male Cable 30 Inch Length Using M17/28-RG58 Coax., Radio frequency assembly MIL-DTL-17 BNC male to TNC male cable 30 inch length using M17/28-RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 BNC male to TNC male cable 30 inch length using M17/28-RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/16-0013 BNC to M39012/26-0010 TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/16-0013 BNC cable connection on one end and M39012/26-0010 TNC cable connection on the other. Our M39012/16-0013 BNC to M39012/26-0010 TNC cable assemblies have a male gender on end 1 and male on end 2. This M39012/16-0013 BNC to M39012/26-0010 TNC cable is a male to male coax assembly, PE3M0118-30, can also be known as a MIL-DTL-17/MIL-C-17 M39012/16-0013 BNC plug to M39012/26-0010 TNC plug cable assembly and will be shipped same-day as it is purchased. M39012/16-0013 BNC plug to M39012/26-0010 TNC plug cable assembly PE3M0118-30 is built with M17/28-RG058 which is a flexible coax type. The Pasternack flexible M39012/16-0013 BNC cable assembly is manufactured with M39012/16-0013 BNC to M39012/26-0010 TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this MIL-C-17 1 GHz maximum frequency M39012/16-0013 BNC male to M39012/26-0010 TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0118-30 can also be used in the other direction and will be M39012/26-0010 TNC male to M39012/16-0013 BNC male cable assembly if the opposite connectivity is required. M39012/16-0013 BNC plug to M39012/26-0010 TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/16-0013 BNC to M39012/26-0010 TNC cable assembly for quick shipment worldwide. Variations of M39012/16-0013 BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 BNC male to TNC male cable 30 inch length using M17/28-RG58 coax. |
| 4 | ||
| PE36118-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: MC-Card, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MC-Card, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 36 inches. MC-Card Plug to MC-Card Plug Cable 36 Inch Length Using RG316 Coax., Radio frequency assembly MC-Card plug to MC-Card plug cable 36 inch length using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MC-Card plug to MC-Card plug cable 36 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MC-Card to MC-Card cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MC-Card cable connection on one end and MC-Card cable connection on the other. Our MC-Card to MC-Card cable assemblies have a plug gender on end 1 and plug on end 2. This MC-Card to MC-Card cable is a plug to plug coax assembly, PE36118-36, can also be known as a MC-Card male to MC-Card male cable assembly and will be shipped same-day as it is purchased. MC-Card male to MC-Card male cable assembly PE36118-36 is built with RG316 which is a flexible coax type. The Pasternack flexible MC-Card cable assembly is manufactured with MC-Card to MC-Card cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this MC-Card plug to MC-Card plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. MC-Card male to MC-Card male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MC-Card to MC-Card cable assembly for quick shipment worldwide. Variations of MC-Card cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MC-Card plug to MC-Card plug cable 36 inch length using RG316 coax. |
| 0 | ||
| PE3W11839 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. N Female to BNC Male Cable Using RG223 Coax. PE3W11839 is a N female to BNC male cable using RG223 coax. This Pasternack N female to BNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm BNC for connector 2. Our female N to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W11839 N female to BNC male cable assembly is constructed with RG223 coax. | 0 | |||
| PE3C11118-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Female to TNC Male Low Loss Cable 36 Inch Length Using PE-P142LL Coax with Lock Wire Holes., Pasternack’s PE3C11118-36 low loss SMA female to TNC male RF cable assembly using PE-P142LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA female to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with an SMA cable connection on one end and a TNC cable connection on the other. Our SMA to TNC cable assembly has a female gender on end 1 and a male on end 2. PE3C11118-36 can also be known as a low loss SMA jack to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.975-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C11118-36 RF cable has an FEP jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. Our SMA female to TNC male cable has a maximum VSWR of 1.5:1. This PE3C11118-36 SMA jack to TNC plug cable assembly is built with PE-P142LL, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. One connector features the clamp/solder attachment method, while the other has the solder attachment method. Additional dimensions, specifications, and CAD drawings for this 36-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3C11118-36 can also be used in the other direction and will be a TNC male to SMA female cable assembly if the opposite connectivity is required. This low loss SMA jack to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. |
| 0 | ||
| PE3W11835 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. 1.0/2.3 Plug to N Male Right Angle Cable Using RG316 Coax., Radio frequency assembly 1.0/2.3 plug to N male right angle cable using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.0/2.3 plug to N male right angle cable using RG316 coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 1.0/2.3 cable connection on one end and right angle N type cable connection on the other. Our 1.0/2.3 to right angle type N cable assemblies have a plug gender on end 1 and male on end 2. PE3W11835 can also be known as a 1.0/2.3 male to right angle type N plug cable assembly and will be shipped same-day as it is purchased. 1.0/2.3 male to N type plug cable assembly PE3W11835 is built with RG316 which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to right angle type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency 1.0/2.3 plug to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W11835 can also be used in the other direction and will be right angle N type male to 1.0/2.3 plug cable assembly if the opposite connectivity is required. 1.0/2.3 male to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to type N cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 1.0/2.3 plug to N male right angle cable using RG316 coax. | 0 | |||
| PE3C1183LF/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG213/U, RF Cable Type: RG213, RF Cable Impedance: 50 Ohm. 7/16 DIN Male Right Angle to N Male Cable Using RG213 Coax with HeatShrink, LF Solder., Radio frequency assembly 7/16 DIN male right angle to N male cable using RG213 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male right angle to N male cable using RG213 coax with heatshrink, LF solder, 7/16 DIN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle 7/16 DIN cable connection on one end and N type cable connection on the other. Our right angle 7/16 DIN to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C1183LF/HS can also be known as a right angle 7/16 DIN plug to type N plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to N type plug cable assembly PE3C1183LF/HS is built with RG213 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with right angle 7/16 DIN to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 7/16 DIN right angle male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1183LF/HS can also be used in the other direction and will be N type male to right angle 7/16 DIN male cable assembly if the opposite connectivity is required. 7/16 DIN right angle plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male right angle to N male cable using RG213 coax with heatshrink, LF solder. | 0 | |||
| PE3W11831/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: MCX, Connector Gender 1: Jack, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. Reverse Polarity MCX Jack Bulkhead to SMA Male Right Angle Cable Using RG178 Coax with HeatShrink. PE3W11831/HS is a reverse polarity MCX jack bulkhead to SMA male right angle cable using RG178 coax. This Pasternack reverse polarity MCX jack bulkhead to SMA male right angle cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm SMA for connector 2. MCX to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our reverse polarity jack MCX bulkhead to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W11831/HS MCX reverse polarity jack bulkhead to SMA male right angle cable assembly is constructed with RG178 coax. | 0 | |||
| PE3W11830/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm. N Male Right Angle to N Male Right Angle Cable Using RG141 Coax with HeatShrink. PE3W11830/HS is a N male right angle to N male right angle cable using RG141 coax. This Pasternack N male right angle to N male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N right angle to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W11830/HS N male right angle to N male right angle cable assembly is constructed with RG141 coax. | 0 | |||
| PE35118-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMA Female 4 Hole Flange to SMA Female 4 Hole Flange Cable 36 Inch Length Using PE-047SR Coax., Radio frequency assembly SMA female 4 hole flange to SMA female 4 hole flange cable 36 inch length using PE-047SR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female 4 hole flange to SMA female 4 hole flange cable 36 inch length using PE-047SR coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA 4 hole flange cable connection on one end and SMA 4 hole flange cable connection on the other. Our SMA to SMA cable assemblies have a female gender on end 1 and female on end 2. This SMA to SMA cable is a female to female coax assembly, PE35118-36, can also be known as a SMA jack to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA jack cable assembly PE35118-36 is built with PE-047SR which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA female 4 hole flange to SMA female 4 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA jack 4 hole flange to SMA jack 4 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female 4 hole flange to SMA female 4 hole flange cable 36 inch length using PE-047SR coax. |
| 0 | ||
| PE3W01183LF | Pasternack Enterprises | Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. MCX Plug to BNC Male Cable Using RG223 Coax, RoHS. PE3W01183LF is a MCX plug to BNC male cable using RG223 coax. This Pasternack MCX plug to BNC male cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm BNC for connector 2. Our plug MCX to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01183LF MCX plug to BNC male cable assembly is constructed with RG223 coax. | 0 | |||
| PE3W11835-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 1.0/2.3 Plug to N Male Right Angle Cable 12 Inch Length Using RG316 Coax., Radio frequency assembly 1.0/2.3 plug to N male right angle cable 12 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.0/2.3 plug to N male right angle cable 12 inch length using RG316 coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 1.0/2.3 cable connection on one end and right angle N type cable connection on the other. Our 1.0/2.3 to right angle type N cable assemblies have a plug gender on end 1 and male on end 2. PE3W11835-12 can also be known as a 1.0/2.3 male to right angle type N plug cable assembly and will be shipped same-day as it is purchased. 1.0/2.3 male to type N plug cable assembly PE3W11835-12 is built with RG316 which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to right angle N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency 1.0/2.3 plug to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W11835-12 can also be used in the other direction and will be right angle type N male to 1.0/2.3 plug cable assembly if the opposite connectivity is required. 1.0/2.3 male to N type right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to type N cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 1.0/2.3 plug to N male right angle cable 12 inch length using RG316 coax. |
| 0 | ||
| PE3W11837/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. N Male to Reverse Polarity SMA Female Cable Using LMR-240-UF Coax with HeatShrink. PE3W11837/HS is a N male to reverse polarity SMA female cable using LMR-240-UF coax. This Pasternack N male to reverse polarity SMA female cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. Our male N to reverse polarity female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W11837/HS N male to SMA reverse polarity female cable assembly is constructed with LMR-240-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
![]() Venkel Ltd. | C1812C0G201-183JNE | VENKEL LTD | HV Chip Capacitor;1812;C0G;200V;0.018uF;�5% RoHS : Compliant | 0 | ||
| CR1206-8W-1183DT | VENKEL LTD | Chip Resistor;1206;1/8W;118K ;�0.5% RoHS : Compliant | 0 | |||
| TFCR0603-10W-C-1183BT | VENKEL LTD | Thin Film CR;0603;1/10W;�50PPM;118K ;�0.1% RoHS : Compliant | 0 | |||
| TFCR0805-10W-E-1183CT-1K | VENKEL LTD | Thin Film CR;0805;1/10W;�25PPM;118K ;�0.25% RoHS : Compliant | 0 | |||
| TFCR0805-8W-K-1183FT-1K | VENKEL LTD | Thin Film CR;0805;1/8W;�100PPM;118K ;�1% RoHS : Compliant | 0 | |||
| TFCR2512-2W-E-1183FT | VENKEL LTD | Thin Film CR;2512;1/2W;�25PPM;118K ;�1% RoHS : Compliant | 0 | |||
C0805X7R501-183KNE![]() | VENKEL LTD | HV Chip Capacitor;0805;X7R;500V;0.018uF;�10% RoHS : Compliant | 0 | |||
| C1812X7R201-183KNE | VENKEL LTD | HV Chip Capacitor;1812;X7R;200V;0.018uF;�10% RoHS : Compliant | 0 | |||
| AGCR2512-2XK-1183DT | VENKEL LTD | Auto Grade Resistor;2512;2W;�100PPM;118K;�0.5% RoHS : Compliant | 0 | |||
| MELFC0102-UC-1183DT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/5W;�50PPM;118K;�0.5% RoHS : Compliant | 0 | |||
| MELFC0207-XZ-1183FT | VENKEL LTD | MELF Coated Thin Film CR;0207;1W;�15PPM;118K;�1% RoHS : Compliant | 0 | |||
| HPTF0805-RE-1183AT | VENKEL LTD | High Power Thin Film CR;0805;1/8W;�25PPM;118K ;�0.05% RoHS : Compliant | 0 | |||
| HPTF1206-TN-1183DT | VENKEL LTD | High Power Thin Film CR;1206;1/4W;�10PPM;118K ;�0.5% RoHS : Compliant | 0 | |||
| TFCR0603-10W-K-1183CT | VENKEL LTD | Thin Film CR;0603;1/10W;�100PPM;118K ;�0.25% RoHS : Compliant | 0 | |||
| TFCR0603-16W-E-1183BT-1K | VENKEL LTD | Thin Film CR;0603;1/16W;�25PPM;118K;�0.1% RoHS : Compliant | 0 | |||
![]() Vyrian | 1071183 | Phoenix Contact | Barrier Strip Terminal Block, 13.5A, 1.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 12,769 | ||
| 74AC11833J | Texas Instruments | Bus Driver/Transceiver, 1-Func, 8-Bit, True Output, CMOS, CDIP28 RoHS : Not Compliant | 9,340 | |||
| 118329-HMC627ALP5 | Analog Devices Inc | RoHS : Compliant | 8,300 | |||
| 74ACT11833DW | Texas Instruments | Bus Transceiver, ACT Series, 1-Func, 8-Bit, True Output, CMOS, PDSO28 RoHS : Not Compliant | 8,088 | |||
| 74ACT11833J | Texas Instruments | Bus Driver/Transceiver, 1-Func, 8-Bit, True Output, CMOS, CDIP28 RoHS : Not Compliant | 7,809 | |||
| 74AC11833DW | Texas Instruments | Bus Transceiver, AC Series, 1-Func, 8-Bit, True Output, CMOS, PDSO28 RoHS : Not Compliant | 7,712 | |||
| 74AC11833N | Texas Instruments | Bus Driver/Transceiver, 1-Func, 8-Bit, True Output, CMOS, PDIP28 RoHS : Not Compliant | 7,640 | |||
| 74AC11833DWR | Texas Instruments | Bus Transceiver, AC Series, 1-Func, 8-Bit, True Output, CMOS, PDSO28 | 7,541 | |||
| 118329-HMC627LP5 | Analog Devices Inc | 6,814 | ||||
| 74AC11833NT | Texas Instruments | Bus Transceiver, AC Series, 1-Func, 8-Bit, True Output, CMOS, PDIP28 RoHS : Not Compliant | 6,753 | |||
| 118355 | Micron Technology, Inc | 6,105 | ||||
| 74ACT11833DWR | Texas Instruments | Bus Transceiver, ACT Series, 1-Func, 8-Bit, True Output, CMOS, PDSO28 | 4,619 | |||
| 77313-118-30LF | Amphenol Communications Solutions | Board Connector, 30 Contact(s), 2 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, Locking, Black Insulator | 4,414 | |||
| 74ACT11833N | Texas Instruments | Bus Driver/Transceiver, 1-Func, 8-Bit, True Output, CMOS, PDIP28 RoHS : Not Compliant | 4,336 | |||
| 74ACT11833NT | Texas Instruments | Bus Transceiver, ACT Series, 1-Func, 8-Bit, True Output, CMOS, PDIP28 RoHS : Not Compliant | 3,518 | |||
![]() Win Source Electronics | TLV7111830DSER![]() | Texas Instruments | IC REG LIN 1.8V/3V 200MA 6WSON / Over-Current and Thermal Protection RoHS : Compliant |
| 15,000 | |
| TLV7111830DSE | Texas Instruments | Dual Linear Voltage Regulator 200mA/200mA 1.8V/3.0V Output WSON-6 |
| 15,000 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |