| Electronic Components Datasheet Search |
|
1243SLASH2C Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Microchip Technology Inc | 124-33104-06-2 | Microchip Technology Inc | STANDOFF HEX 2-56 3/8IN LG SS, Projected EOL: 2051-06-04 - Contact for Pricing | 0 | ||
| 112-43400-00-3 | Microchip Technology Inc | LIGHTNING ARRESTOR 90V 1.5GHZ N-N CONN, Projected EOL: 2051-01-13 - Contact for Pricing | 0 | |||
| MICRF112-433-EV | Microchip Technology Inc | MICRF112-433 Evaluation Board, Projected EOL: |
| 0 | ||
![]() TME | DRAP124-330-R | Eaton Corporation | Inductor: wire; SMD; 34.1uH; ±20%; 3.42A; ferrite; H: 4.6mm; 130mΩ RoHS : Compliant |
| 750 | |
| 5012434.40 | SIBA Fuses | Fuse: fuse; 14x51mm; ceramic,cylindrical; 40A; 690VAC; 440VDC; URZ |
| 57 | ||
| 22.32.0.012.4320 | FINDER SpA | Contactor: 2-pole installation; 25A; 12VAC,12VDC; NO x2; IP20; 22 RoHS : Compliant |
| 4 | ||
| ECWH12433JVB | Panasonic Electronic Components | Capacitor: polypropylene; ECWH; 0.043uF; 1.25kVDC; 23x11x17.5mm RoHS : Compliant |
| 0 | ||
| MCT06030F1243BP100 | Vishay Intertechnologies | Resistor: thin film; 124kΩ; SMD; 0603; 0.125W; ±0.1%; MCT0603; 0; 75V RoHS : Compliant |
| 0 | ||
| RK73H1ETTP1243F | KOA Speer Electronics Inc | Resistor: thick film; 124kΩ; SMD; 0402; 100mW; ±1%; RK73H; 75V RoHS : Compliant |
| 0 | ||
| ERA8AEB1243V | Panasonic Electronic Components | Resistor: thin film; 124kΩ; SMD; 1206; 250mW; ±0.1%; ERA8AEB RoHS : Compliant |
| 0 | ||
| 7000-13101-2430950 | Murrelektronik GmbH | Cable: for sensors; PIN: 5; M12 male; straight; 9.5m; plug; 60VDC RoHS : Compliant |
| 0 | ||
| 7000-13281-2430050 | Murrelektronik GmbH | Cable: for sensors; PIN: 5; M12 female; angled; 0.5m; plug; 60VDC |
| 0 | ||
| 7000-13281-2430500 | Murrelektronik GmbH | Cable: for sensors; PIN: 5; M12 female; angled; 5m; plug; 60VDC; 4A RoHS : Compliant |
| 0 | ||
| 7000-40521-2430060 | Murrelektronik GmbH | Cable: for sensors; PIN: 5; 0.6m; 60VDC; 60VAC; 4A; Cores: 5; PUR |
| 0 | ||
| MCT06030D1243BP500 | Vishay Intertechnologies | Resistor: thin film; 124kΩ; SMD; 0603; 0.125W; ±0.1%; MCT0603; 0; 75V RoHS : Compliant |
| 0 | ||
| 22.34.0.012.4340 | FINDER SpA | Contactor: 4-pole installation; 25A; 12VAC,12VDC; NO x4; IP20; 22 |
| 0 | ||
| 22.44.0.012.4310 | FINDER SpA | Contactor: 4-pole installation; 40A; 12VAC,12VDC; NO x4; IP20; 22 |
| 0 | ||
| DRA124-331-R | Eaton Electronics | Inductor: wire; SMD; 326.9uH; Ioper: 690mA; R: 892mΩ; ±20%; -40÷165°C |
| 0 | ||
![]() Ameya Holding Limited | ESR03EZPF1243 | ROHM Semiconductor | Anti-surge Chip Resistors RoHS : Compliant |
| 25,000 | |
| KTR18EZPF1243 | ROHM Semiconductor | High Voltage Resistance Chip Resistors RoHS : Compliant |
| 15,000 | ||
ESR18EZPF1243![]() | ROHM Semiconductor | Anti-surge Chip Resistors RoHS : Compliant |
| 15,000 | ||
ESR10EZPF1243![]() | ROHM Semiconductor | Anti-surge Chip Resistors RoHS : Compliant |
| 15,000 | ||
| KTR10EZPF1243 | ROHM Semiconductor | High Voltage Resistance Chip Resistors RoHS : Compliant |
| 10,000 | ||
| KTR03EZPF1243 | ROHM Semiconductor | High Voltage Resistance Chip Resistors RoHS : Compliant |
| 10,000 | ||
| BD61243FV-GE2 | ROHM Semiconductor | 高性能单相全波风扇电机驱动器 RoHS : Compliant |
| 5,250 | ||
![]() ComSIT USA | RG1608P1243BT5 | SUSUMU CO LTD | AVAILABLE EU | 15,431 | ||
| 20001243 | World Precision Instruments | AVAILABLE EU | 2,802 | |||
![]() NexGen Digital | RK73H2BT1243F | KOA Speer Electronics Inc | RoHS : Not Compliant | 18,731 | ||
| CRCW04021243FT | Vishay Dale | 9,504 | ||||
| ERA-3AEB1243V | Panasonic Electronic Components | 5,000 | ||||
| RN1/4W T1 2-43M 1% | SEI Stackpole Electronics Inc | 4,700 | ||||
| TYPE 101 2.43K OHM .1% | 10 | |||||
![]() Richardson RFPD | RFT-1243 | RF Industries | Between Series Adapt RoHS : Compliant | 0 | ||
| DRA124-331-R | Eaton Corporation | Inductor Power Shielded Drum Core 326.9uH/330uH 20 RoHS : Compliant |
| 0 | ||
| MAAL-011243 | MACOM | Two-stage Low Noise Amplifier with Bypass RoHS : Compliant | 0 | |||
| 124390-HMC741ST89E | Analog Devices Inc | HMC741ST89E RF Amplifier Evaluation Board RoHS : Compliant | 0 | |||
| R124312120W | Radiall | Conn SMA 0Hz to 12.4GHz 50Ohm Crimp ST Panel Mount RoHS : Compliant |
| 0 | ||
| R300124343W | Radiall | Conn SMA 0Hz to 12.4GHz 50Ohm Crimp RA Panel Mount RoHS : Compliant |
| 0 | ||
| R124314120W | Radiall | Conn SMA 0Hz to 12.4GHz 50Ohm Crimp ST Panel Mount RoHS : Compliant |
| 0 | ||
| R124312123 | Radiall | Conn SMA 0Hz to 12.4GHz 50Ohm Crimp ST Panel Mount RoHS : Compliant |
| 0 | ||
| LT1243CS8#PBF | Analog Devices Inc | Current Mode PWM Controller 1A 500kHz 8-Pin SOIC N RoHS : Compliant |
| 0 | ||
| SI5335D-B11243-GM | Skyworks Solutions Inc | Clock Generator 10MHz to 350MHz-IN 200MHz-OUT 24-P RoHS : Compliant | 0 | |||
| LT1243IS8#PBF | Analog Devices Inc | Current Mode PWM Controller 1A 500kHz 8-Pin SOIC N RoHS : Compliant |
| 0 | ||
| R124326003 | Radiall | Conn SMA 0Hz to 18GHz 50Ohm Solder ST Panel Mount RoHS : Compliant |
| 0 | ||
| R124313123 | Radiall | Conn SMA 0Hz to 12.4GHz 50Ohm Crimp ST Panel Mount RoHS : Compliant |
| 0 | ||
| R412430000 | Radiall | Attenuator 2GHz RoHS : Compliant |
| 0 | ||
| R431211243 | Radiall | RF Hybrid Coupler RoHS : Not Compliant | 0 | |||
![]() Rutronik | CR21-2433-FL | ASJ Holdings Limited | RC0805 243K 1% 0,125W TK100 RoHS : Compliant |
| 20,000 | |
| CR21-2434-FL | ASJ Holdings Limited | RC0805 2,43M 1% 0,125W TK100 RoHS : Compliant |
| 15,000 | ||
| 39281243 | Molex | 24P Mini-Fit Jr 2 ROW Header RoHS : Compliant |
| 400 | ||
| 67.22.9.012.4300 | FINDER SpA | POWER THT 2NO 12DC 50A RoHS : Compliant |
| 60 | ||
| 62.23.9.012.4300 | FINDER SpA | POWER THT 3NO 16A 12DC RoHS : Compliant |
| 20 | ||
![]() Chip 1 Exchange | RK73H1ETTP1243F | KOA Speer Electronics Inc | INSTOCK RoHS : Compliant | 10,003 | ||
| CR10-1243-F# | ASJ Holdings Limited | INSTOCK | 8,074 | |||
| RN1/4-T1-2.43K-1%-R | SEI Stackpole Electronics Inc | INSTOCK | 5,000 | |||
| CR16-1243-F# | ASJ Holdings Limited | INSTOCK | 3,567 | |||
| CRCW12061243FT | Vishay Intertechnologies | INSTOCK | 3,499 | |||
| CR0402-FX-1243GLF | Bourns Inc | INSTOCK RoHS : Compliant | 3,028 | |||
MAX1243AESA-T![]() | Maxim Integrated Products | INSTOCK RoHS : Not Compliant | 2,445 | |||
| IP80C51243 | INSTOCK | 1,053 | ||||
| CR18-1243FM | INSTOCK | 563 | ||||
| GF CSHPM1.24-3 | INSTOCK | 557 | ||||
| CSHPM1.24-3 | INSTOCK | 557 | ||||
| CDRH124-3R9MC | Sumida Corporation | INSTOCK RoHS : Not Compliant | 500 | |||
| ERA-3AEB1243V | Panasonic Electronic Components | INSTOCK | 170 | |||
| RNC55H1243FS | INSTOCK | 81 | ||||
| A1-2429-TWT-124-3-R | INSTOCK | 16 | ||||
![]() Avnet Asia | NCP81243MNTXG | onsemi | (Alt: NCP81243MNTXG) RoHS : Compliant |
| 12,500 | |
| ERJ3EKF1243V | Panasonic Electronic Components | SMD Chip Resistor, 124 kohm, ? 1%, 100 mW, 0603 [1608 Metric], Thick Film (Alt: ERJ3EKF1243V) RoHS : Compliant | 0 | |||
| BD61243FV-GE2 | ROHM Semiconductor | Brushless DC Motor Driver 5.5V to 16V 14-Pin SSOP-B Emboss T/R (Alt: BD61243FV-GE2) RoHS : Compliant | 0 | |||
| ERJ2RKF1243X | Panasonic Electronic Components | SMD Chip Resistor, 124 kohm, ? 1%, 100 mW, 0402 [1005 Metric], Thick Film (Alt: ERJ2RKF1243X) RoHS : Compliant | 0 | |||
| ESR03EZPF1243 | ROHM Semiconductor | (Alt: ESR03EZPF1243) RoHS : Compliant | 0 | |||
| 0039281243 | Molex | Pin Header, 24 Contacts, 2 Rows, 4.2mm, Tin, 9A, Straight, Shrouded, Brass, Wire-to-Board, THT (Alt: 0039281243) RoHS : Compliant | 0 | |||
| MCT06030E1243BP100 | Vishay Intertechnologies | (Alt: MCT06030E1243BP100) RoHS : Compliant | 0 | |||
| 10124308-101LF | Amphenol Corporation | (Alt: 10124308-101LF) RoHS : Compliant | 0 | |||
| ERJP03F1243V | Panasonic Electronic Components | SMD Chip Resistor, 124 kohm, ? 1%, 200 mW, 0603 [1608 Metric], Thick Film, High Power, Anti-Surge (Alt: ERJP03F1243V) RoHS : Compliant | 0 | |||
| DR124-330-R | Eaton Corporation | (Alt: DR124-330-R) RoHS : Compliant | 0 | |||
| WR02X1243FAL | Walsin Technology Corporation | (Alt: WR02X1243FAL) RoHS : Compliant | 0 | |||
| 112438 | Amphenol Corporation | (Alt: 112438) RoHS : Compliant | 0 | |||
| DD12.4321.111 | Schurter Electronic Components | DD12 POWER ENTRY MODULE W. FILTER 4A M5 (Alt: DD12.4321.111) RoHS : Compliant | 0 | |||
| DRA124-330-R | Eaton Corporation | (Alt: DRA124-330-R) RoHS : Compliant |
| 0 | ||
| 2512436-1 | TE Connectivity | CAB AY S8K SBD MD-PI 3.3V 2A TYC (Alt: 2512436-1) RoHS : Compliant | 0 | |||
![]() Avnet Silica | NBC12439AMNG![]() | onsemi | PLL Clock Generator Synthesized Programmable 33 V 50 V with Power Down 50 to 800 MHz (Alt: NBC12439AMNG) RoHS : Compliant | 0 | ||
NBC12430AMNG![]() | onsemi | PLL Synthesized Clock Generator Programmable 33 V 50 V 50 to 800 MHz (Alt: NBC12430AMNG) RoHS : Compliant | 0 | |||
NBC12430FAR2G![]() | onsemi | PLL Synthesized Clock Generator Programmable 33 V 50 V 50 to 800 MHz (Alt: NBC12430FAR2G) RoHS : Compliant | 0 | |||
| NCP81243MNTXG | onsemi | MultiPhase Buck Controller for IMVP8 Industrial Temp Range IMVP8 32 Notebook Desktop 2 Rail Controller (Alt: NCP81243MNTXG) RoHS : Compliant | 0 | |||
| MICRF112-433-EV | Microchip Technology Inc | MICRF112 ASKFSK Transmitter Evaluation Board (Alt: MICRF112-433-EV) RoHS : Compliant | 0 | |||
| MX25L51243GXDI00/TR | Macronix International Co Ltd | (Alt: MX25L51243GXDI00/TR) RoHS : Compliant | 0 | |||
| MX25L51243GZ4I00/TR | Macronix International Co Ltd | (Alt: MX25L51243GZ4I00/TR) RoHS : Compliant | 0 | |||
| MX25L51243GXDI08/TR | Macronix International Co Ltd | BGA24 I 3V 512MBIT CMOS MXSMIO (Alt: MX25L51243GXDI08/TR) RoHS : Compliant | 0 | |||
| MX25L51243GMI00/TUBE | Macronix International Co Ltd | TV 66C 6622D PIN PLUG (Alt: MX25L51243GMI00/TUBE) RoHS : Compliant | 0 | |||
| MX25L51243GZ4I00/TRAY | Macronix International Co Ltd | TV 66C 6622D SKT PLUG (Alt: MX25L51243GZ4I00/TRAY) RoHS : Compliant | 0 | |||
| SIT91243AE-8A-A00000-T | SiTime Corporation | SiT91243 E 40C to 105C Endura UltraLow Jitter 4Output MEMS Clock Generator (Alt: SIT91243AE-8A-A00000-T) RoHS : Compliant | 0 | |||
| SIT91243AA-3A-A00000-T | SiTime Corporation | SIT91243 A Endura UltraLow Jitter 4Output MEMS Clock Generator (Alt: SIT91243AA-3A-A00000-T) RoHS : Compliant | 0 | |||
| SIT91243AA-8A-A00000-T | SiTime Corporation | SIT91243 A Endura UltraLow Jitter 4Output MEMS Clock Generator (Alt: SIT91243AA-8A-A00000-T) RoHS : Compliant | 0 | |||
| SIT91243AE-3A-A00000-T | SiTime Corporation | SiT91243 40C to 105C Endura UltraLow Jitter 4Output MEMS Clock Generator (Alt: SIT91243AE-3A-A00000-T) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | AMSRL1-243.3ZTR | Aimtec | RoHS : Compliant |
| 0 | |
| AMSRL1-243.3Z | Aimtec | RoHS : Compliant |
| 0 | ||
![]() Chip-Germany GmbH | SL22 124 34G | FIS | 43 | |||
| 31243 FLINK | Wohmer | 2 | ||||
![]() Component Electronics, Inc | CR0805F1243T1LF | Chip Technologies Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 20,000 | |
| CR0402F1243T1LF | Chip Technologies Inc | IN STOCK SHIP TODAY |
| 15,400 | ||
| CR32A1243FT | IBS Electronics Inc | IN STOCK SHIP TODAY RoHS : Unknown |
| 10,000 | ||
| CR0603F1243T1 | Chip Technologies Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 7,900 | ||
| 9C06031A1243FKPFT | YAGEO Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 4,350 | ||
| ERJ-2RKF1243X | Panasonic Electronic Components | IN STOCK SHIP TODAY |
| 2,700 | ||
| 2338-724-61243 | Philips Semiconductors | IN STOCK SHIP TODAY |
| 2,700 | ||
| ASP-112433-01 | Samtec Inc | IN STOCK SHIP TODAY | 2,600 | |||
| CR1/2-43R-TJ | D-AGE | IN STOCK SHIP TODAY |
| 2,400 | ||
| RC01-243R-1% | Philips Semiconductors | IN STOCK SHIP TODAY |
| 2,000 | ||
| 2322-711-61243 | Philips Semiconductors | IN STOCK SHIP TODAY |
| 1,690 | ||
| BD5.1/2/4-3S1 | Philips Semiconductors | IN STOCK SHIP TODAY |
| 500 | ||
| 39-28-1243 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 15 | ||
| 2391243-2-9 | TAVCO | IN STOCK SHIP TODAY | 4 | |||
LT1243CS8#PBF![]() | Linear Technology | IN STOCK SHIP TODAY RoHS : Compliant |
| 3 | ||
![]() DB Roberts | AECH3124-331 | PennEngineering (PEM) | 5/16 | 0 | ||
| 12SWS1243B | Essentra Components | SHOULDER WASHER, .437 ID, .630 | 0 | |||
| 1243-25-A | RAF Electronic Hardware | 0 | ||||
| 12SWS1243 | Essentra Components | SHOULDER WASHER, .437 ID, .630 | 0 | |||
| 12430 | Heyco | DS-062-48 CHANNEL GRAY | 0 | |||
| 12430 | Essentra Components | TAPERED CAPPLUGLDPE RED | 0 | |||
| 12439 | Essentra Components | 0 | ||||
| 1112430000VR | Essentra Components | 0 | ||||
| M1124-3506-A | RAF Electronic Hardware | 0 | ||||
| 12435 | Essentra Components | TAPERED CAPPLUG WIDE FLGLDPE R | 0 | |||
| 13RS031243B | Essentra Components | ROUND SPACER, .171 ID, .313 OD | 0 | |||
| CAL2-3124-312 | SHEREX FASTENING SO | 0 | ||||
| CAL1-3124-312 | SHEREX FASTENING SO | 0 | ||||
| 461243 | Essentra Components | 0 | ||||
| M1124-3005-SS | RAF Electronic Hardware | 0 | ||||
![]() EBV Elektronik | NBC12439AMNG![]() | onsemi | PLL Clock Generator Synthesized Programmable 33 V 50 V with Power Down 50 to 800 MHz (Alt: NBC12439AMNG) RoHS : Compliant | 0 | ||
| R1243K001B-TR | Nisshinbo Micro Devices | (Alt: R1243K001B-TR) RoHS : Compliant | 0 | |||
| NCP81243MNTXG | onsemi | MultiPhase Buck Controller for IMVP8 Industrial Temp Range IMVP8 32 Notebook Desktop 2 Rail Controller (Alt: NCP81243MNTXG) RoHS : Compliant | 0 | |||
| R1243K001A-TR | Nisshinbo Micro Devices | AC 5C MIXED SKT PLUG (Alt: R1243K001A-TR) RoHS : Compliant | 0 | |||
NBC12430AFNR2G![]() | onsemi | Programmable PLL Clock Synthesizer Single 28Pin PLCC TR (Alt: NBC12430AFNR2G) RoHS : Compliant | 0 | |||
| R1243S001D-E2-FE | Nisshinbo Micro Devices | (Alt: R1243S001D-E2-FE) RoHS : Compliant | 0 | |||
| CA12435_HEIDI-ON-90 | LEDIL | Accessories for LEDs Lens Cooling (Alt: CA12435_HEIDI-ON-90) RoHS : Compliant | 0 | |||
![]() FDH Electronics | M22759/11-24-3 | Harbour Industries | Wire and Cable RoHS : Compliant |
| 6,156 | |
| M22759/11-24-30 | Whitmore/Wirenetics | Hook-Up Wire | 126 | |||
| MS27212-4-3 | Marco | Terminals & Spl |
| 66 | ||
| M22759/11-24-3 | Amphenol Cable & Interconnect Technologies | Hook-Up Wire RoHS : Compliant |
| 62 | ||
| 39-28-1243 | Molex | Connector Misc RoHS : Compliant | 4 | |||
| 55PC1231-24-3/6/9-9 | TE Connectivity | Wire and Cable | 3 | |||
| 874371243 | Digi International Inc | Test Samples - | 3 | |||
| 970-001Z124-3A-1 | Glenair Inc | Connector Misc |
| 2 | ||
| ST5M1243-1107 | DRI Relays Inc | Relays & Cont | 1 | |||
| ST5M1243-2127-1 | DRI Relays Inc | Relays |
| 0 | ||
| ST5M1243-3113 | DRI Relays Inc | Relays & Cont |
| 0 | ||
| MS27212-4-3 | R&B Electronics | Terminals & Spl | 0 | |||
| ST5M1243-1113 | DRI Relays Inc | Relays & Cont | 0 | |||
| ST5M1243-3102 | DRI Relays Inc | Relays & Cont | 0 | |||
| EN-12439 | Honeywell Sensing and Control | Switch Acc. | 0 | |||
![]() Flip Electronics | NBC12430FNG![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 3,478 | |
NBC12439AMNG![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 814 | ||
NBC12439FAG![]() | onsemi | Stock RoHS : Compliant | 250 | |||
NBC12430FNR2G![]() | onsemi | Stock, Ship Today RoHS : Compliant | 147 | |||
| NBC12430AMN | onsemi | Stock | 48 | |||
NBC12430AMNG![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 48 | ||
![]() Maritex | 874381243 | Molex | Male Pin Headers; 874381243; MOLEX; 1; Tin; 12; 12 RoHS : Compliant |
| 27,238 | |
| 2371243-1 | TE Connectivity | Connector shielding ferrule; outer; HVA HD400 series; copper alloy; for automotive HV connectors; sealable; operating temp. -40 to 140�C RoHS : Compliant |
| 1,525 | ||
| 1612124-3 | TE Connectivity | Rectangular Connector Contacts; 1612124-3; TE CONNECTIVITY; Tin; Crimp; 20 AWG; 22 AWG RoHS : Compliant |
| 622 | ||
| 32.21.7.012.4300 | FINDER SpA | Electromagnetic relay; contact rating current 6A; coil voltage 12VDC; 1 make contact (1A); coil power 200mW; 6A/30VDC; 6A/230VAC RoHS : Compliant |
| 20 | ||
| 43.41.7.012.4300 | FINDER SpA | Electromagnetic relay; contact rating current 10A; coil voltage 12VDC; make contact (1A); coil poweri 250 mW; 10A/30VDC; 10A/250VAC RoHS : Compliant |
| 20 | ||
![]() Master Electronics | 1243 | Greenlee Textron Inc | KNOB RoHS : Compliant |
| 1 | |
| PESS-02-12-L-12.43-SR | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MW1-9-12-430-1-B21-B-M | Carling Technologies | MW19124301B21BM RoHS : Compliant |
| 0 | ||
| 09-0124-300-06 | Franz Binder GmbH & Co | M16 IP67 Square female panel mount connector Contacts: 6 (06-a) unshielded solder IP67 UL RoHS : Compliant |
| 0 | ||
| 1-2437979-2 | TE Connectivity | SLC4-F14-121 RoHS : Compliant |
| 0 | ||
| 1-2439028-5 | TE Connectivity | HCP 10A Lgt Force 0.187 Term. Ext LVR MOQ Reduction RoHS : Compliant |
| 0 | ||
| ESW-124-33-T-D | Samtec Inc | .100 Elevated Socket Strip RoHS : Compliant |
| 0 | ||
| HTSW-124-30-H-T | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-FM-D-121-243 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-H-D-111-243 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 1-2437979-6 | TE Connectivity | SLC4-F14-166 RoHS : Compliant |
| 0 | ||
| 1-2439028-9 | TE Connectivity | HCP10A LigtForce 0.187 Term. Smt Roller MOQ Reduction RoHS : Compliant |
| 0 | ||
| CA1-B2-12-430-121-MG | Carling Technologies | CA1B212430121MG RoHS : Compliant |
| 0 | ||
| CA1-B2-12-430-122-BG | Carling Technologies | CA1B212430122BG RoHS : Compliant |
| 0 | ||
| CA2-B0-12-430-1D1-C | Carling Technologies | CA2B0124301D1C RoHS : Compliant |
| 0 | ||
![]() Neutron USA | KMF1.1243.11 | Schurter Electronic Components | AC Power Entry Modules KMF PWR ENTRY MODUL W. FILTER 4A M5 RoHS : Compliant |
| 50 | |
| 3-124-306 | Schurter Electronic Components | AC Power Entry Modules 10A/15A F Black, 7 Outlet, 1.5mm Panel Thickness, No Light Pipe, Bottom, Solder RoHS : Compliant |
| 50 | ||
| 3-124-302 | Schurter Electronic Components | AC Power Entry Modules 4750 Connector Distribution 10A F RoHS : Compliant |
| 50 | ||
| 101243U040BF2A | Knowles CDE | Aluminum Electrolytic Capacitors - Screw Terminal 24000uF 40V |
| 21 | ||
| 22.32.0.012.4320 | FINDER SpA | Relay, 2Pole, DIN Rail Non-Latching, Screw, 2NO, 25 A, Coil: 12V ac/dc RoHS : Compliant |
| 16 | ||
| 21023812431 | HARTING Technology Group | Circular Metric Connectors M8 D-code 4pin FML straight pcb mnt (THR) w/ housing front mnt shielded IP67 RoHS : Compliant |
| 2 | ||
| 1.65.124.321/1306 | RAFI GmbH & Co Kg | Industrial Panel Mount Indicators / Switch Indicators RAFIX 16 Signal Indicator Red |
| 0 | ||
| CSA-M1240M1243 | Banner Engineering Corp | Sensor Cables / Actuator Cables Splitter Cordset; M12 4-pin Male Trunk 0 m (0 ft); One M12 4-pin 0 m (0 ft) Male Trunk Branch, Two M12 4-pin 1 m (3.28 ft) Female Branch |
| 0 | ||
| 22.44.0.012.4310 | FINDER SpA | 4NO DIN Rail Non-Latching Relay Screw, 40 A, 12 V ac, 12 V dc |
| 0 | ||
| CON-1/24/30L | Littelfuse Inc | Contactors - Electromechanical 1P 24V 30A CONT. W/SHNT/CR-L |
| 0 | ||
| 3-124-305 | Schurter Electronic Components | AC Power Entry Modules 10A/15A F Black, 6 Outlet, 1.5mm Panel Thickness, No Light Pipe, Bottom, Solder RoHS : Compliant |
| 0 | ||
| 124 314111 | White-Rodgers | Contactors - Electromechanical SPDT 24VDC |
| 0 | ||
| 1.65.124.301/1306 | RAFI GmbH & Co Kg | Industrial Panel Mount Indicators / Switch Indicators Signal indicator square flush lens |
| 0 | ||
| 1012433 | Phoenix Contact | Heavy Duty Power Connectors Panel mounting base COM with single locking latch material RoHS : Compliant |
| 0 | ||
| 1.65.124.301/1002 | RAFI GmbH & Co Kg | LED Panel Mount Indicators Signal Indicator White |
| 0 | ||
![]() Pasternack Enterprises US | PE3W12438-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male to TNC Female Low Loss Cable 60 Inch Length Using LMR-400-UF Coax., Radio frequency assembly SMA male to TNC female low loss cable 60 inch length using LMR-400-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC female low loss cable 60 inch length using LMR-400-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a TNC cable connection on the other. Our low loss SMA to TNC cable assembly has a male gender on end 1 and a female on end 2. PE3W12438-60 can also be known as a low loss SMA plug to TNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W12438-60 RF cable has a TPE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our SMA male to TNC female cable has a maximum VSWR of 1.4:1. SMA plug to TNC jack cable assembly PE3W12438-60 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with gold plating, while the other has the solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W12438-60 can also be used in the other direction and will be a TNC female to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 386 | |
| PE3W12438-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. SMA Male to TNC Female Low Loss Cable 300 Inch Length Using LMR-400-UF Coax., Radio frequency assembly SMA male to TNC female low loss cable 300 inch length using LMR-400-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC female low loss cable 300 inch length using LMR-400-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a TNC cable connection on the other. Our low loss SMA to TNC cable assembly has a male gender on end 1 and a female on end 2. PE3W12438-300 can also be known as a low loss SMA plug to TNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W12438-300 RF cable has a TPE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our SMA male to TNC female cable has a maximum VSWR of 1.4:1. SMA plug to TNC jack cable assembly PE3W12438-300 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with gold plating, while the other has the solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W12438-300 can also be used in the other direction and will be a TNC female to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 386 | ||
| PE3W12438-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to TNC Female Low Loss Cable 12 Inch Length Using LMR-400-UF Coax., Radio frequency assembly SMA male to TNC female low loss cable 12 inch length using LMR-400-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC female low loss cable 12 inch length using LMR-400-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a TNC cable connection on the other. Our low loss SMA to TNC cable assembly has a male gender on end 1 and a female on end 2. PE3W12438-12 can also be known as a low loss SMA plug to TNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W12438-12 RF cable has a TPE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our SMA male to TNC female cable has a maximum VSWR of 1.4:1. SMA plug to TNC jack cable assembly PE3W12438-12 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with gold plating, while the other has the solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W12438-12 can also be used in the other direction and will be a TNC female to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 386 | ||
| PE3W12438-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to TNC Female Low Loss Cable 36 Inch Length Using LMR-400-UF Coax., Radio frequency assembly SMA male to TNC female low loss cable 36 inch length using LMR-400-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC female low loss cable 36 inch length using LMR-400-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a TNC cable connection on the other. Our low loss SMA to TNC cable assembly has a male gender on end 1 and a female on end 2. PE3W12438-36 can also be known as a low loss SMA plug to TNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W12438-36 RF cable has a TPE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our SMA male to TNC female cable has a maximum VSWR of 1.4:1. SMA plug to TNC jack cable assembly PE3W12438-36 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with gold plating, while the other has the solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W12438-36 can also be used in the other direction and will be a TNC female to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 386 | ||
| PE3W12434-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. NEX10 Female Bulkhead to NEX10 Female Bulkhead Low PIM Cable 36 Inch Length Using SPP-250-LLPL Coax., Radio frequency assembly NEX10 female bulkhead to NEX10 female bulkhead low PIM cable 36 inch length using SPP-250-LLPL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 female bulkhead to NEX10 female bulkhead low PIM cable 36 inch length using SPP-250-LLPL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 bulkhead cable connection on one end and a NEX10 bulkhead cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has female gender on end 1 and female on end 2. PE3W12434-36 can also be known as a low PIM NEX10 jack to NEX10 jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W12434-36 RF cable has a FEP jacket of 0.280-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 155 degrees C. The corrugated RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 100 dB. NEX10 jack to NEX10 jack cable assembly PE3W12434-36 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 jack bulkhead to NEX10 jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 74 | ||
| PE3W12434-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. NEX10 Female Bulkhead to NEX10 Female Bulkhead Low PIM Cable 12 Inch Length Using SPP-250-LLPL Coax., Radio frequency assembly NEX10 female bulkhead to NEX10 female bulkhead low PIM cable 12 inch length using SPP-250-LLPL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 female bulkhead to NEX10 female bulkhead low PIM cable 12 inch length using SPP-250-LLPL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 bulkhead cable connection on one end and a NEX10 bulkhead cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has female gender on end 1 and female on end 2. PE3W12434-12 can also be known as a low PIM NEX10 jack to NEX10 jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W12434-12 RF cable has a FEP jacket of 0.280-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 155 degrees C. The corrugated RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 100 dB. NEX10 jack to NEX10 jack cable assembly PE3W12434-12 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 jack bulkhead to NEX10 jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 74 | ||
| PE3C1243/HS | Pasternack Enterprises | 0 | ||||
| PE3W01243 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. N Male Right Angle to N Female Bulkhead Low Loss Cable Using LMR-400 Coax., Radio frequency assembly N male right angle to N female bulkhead low loss cable using LMR-400 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to N female bulkhead low loss cable using LMR-400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle type N cable connection on one end and type N bulkhead cable connection on the other. Our low loss right angle N type to type N cable assemblies have a male gender on end 1 and female on end 2. PE3W01243 can also be known as a low loss right angle type N plug to type N jack cable assembly and will be shipped same-day as it is purchased. N type plug to type N jack cable assembly PE3W01243 is built with LMR-400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N right angle male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W01243 can also be used in the other direction and will be type N female bulkhead to right angle N type male cable assembly if the opposite connectivity is required. Low loss N type right angle plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to N female bulkhead low loss cable using LMR-400 coax. | 0 | |||
| PE3W12430 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG401/U, RF Cable Type: RG401, RF Cable Impedance: 50 Ohm. BNC Male to BNC Male Cable Using RG401 Coax. PE3W12430 is a BNC male to BNC male cable using RG401 coax. This Pasternack BNC male to BNC male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. Our male BNC to male BNC cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W12430 BNC male to BNC male cable assembly is constructed with RG401 coax. | 0 | |||
| PE3W01243-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male Right Angle to N Female Bulkhead Low Loss Cable 12 Inch Length Using LMR-400 Coax., Radio frequency assembly N male right angle to N female bulkhead low loss cable 12 inch length using LMR-400 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to N female bulkhead low loss cable 12 inch length using LMR-400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle type N cable connection on one end and type N bulkhead cable connection on the other. Our low loss right angle type N to N type cable assemblies have a male gender on end 1 and female on end 2. PE3W01243-12 can also be known as a low loss right angle type N plug to N type jack cable assembly and will be shipped same-day as it is purchased. Type N plug to type N jack cable assembly PE3W01243-12 is built with LMR-400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N right angle male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W01243-12 can also be used in the other direction and will be type N female bulkhead to right angle N type male cable assembly if the opposite connectivity is required. Low loss N type right angle plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to N female bulkhead low loss cable 12 inch length using LMR-400 coax. |
| 0 | ||
| PE3W12434LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: NEX10, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: NEX10, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm. NEX10 Female Bulkhead to NEX10 Female Bulkhead Cable Using SPP-250-LLPL Coax with HeatShrink, LF Solder. PE3W12434LF/HS is a NEX10 female bulkhead to NEX10 female bulkhead cable using SPP-250-LLPL coax. This Pasternack NEX10 female bulkhead to NEX10 female bulkhead cable assembly uses a 50 Ohm NEX10 for connector 1 and a 50 Ohm NEX10 for connector 2. Our female NEX10 bulkhead to female NEX10 bulkhead cable assembly uses a corrugated cable type that is 50 Ohm. Pasternack PE3W12434LF/HS NEX10 female bulkhead to NEX10 female bulkhead cable assembly is constructed with SPP-250-LLPL coax. | 0 | |||
| PE3W12435 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. TNC Male to N Female Cable Using RG316-DS Coax. PE3W12435 is a TNC male to N female cable using RG316-DS coax. This Pasternack TNC male to N female cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm N for connector 2. Our male TNC to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W12435 TNC male to N female cable assembly is constructed with RG316-DS coax. | 0 | |||
| PE3W21243 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm. BNC Female Bulkhead to SMA Male Cable Using PE-C100-LSZH Coax. PE3W21243 is a BNC female bulkhead to SMA male cable using PE-C100-LSZH coax. This Pasternack BNC female bulkhead to SMA male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMA for connector 2. Our female BNC bulkhead to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21243 BNC female bulkhead to SMA male cable assembly is constructed with PE-C100-LSZH coax. | 0 | |||
| PE3W12431 | Pasternack Enterprises | Key Specifications, Connector Series 1: SSMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm. SSMA Male to SMA Male Cable Using RG188 Coax. PE3W12431 is a SSMA male to SMA male cable using RG188 coax. This Pasternack SSMA male to SMA male cable assembly uses a 50 Ohm SSMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SSMA to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W12431 SSMA male to SMA male cable assembly is constructed with RG188 coax. | 0 | |||
| PE3C11243 | Pasternack Enterprises | 0 | ||||
![]() TE Connectivity | 2371243-1 | TE Connectivity | CU ALLOY,OUTER FERRULE,ICT CVE Connector Shielding Accessory Type: Ferrule Primary Product Material: Copper Alloy Ferrule Copper Alloy | Automotive Connector Emc Shielding | Part Number: 2371243-1 | Internal Number: 2371243-1 | TE Connectivity RoHS : Compliant |
| 1,729 | |
| 9-212437-1 | TE Connectivity | 6 POSN CIRC DIN PLUG ASSEMBLY Number of Positions: 6 Circular DIN Connector Type: Circular DIN Connector System: Wire-to-Board Wire-to-Panel Mating Alignment Type: Keyed Connector & Contact Terminates To: Wire & Cable Din Connector | 6 Circular DIN Wire-to-Board Keyed | Part Number: 9-212437-1 | Internal Number: 9-212437-1 | TE Connectivity RoHS : Compliant |
| 889 | ||
| 1-2273124-3 | TE Connectivity | M8 angled scket to M8 strght plug 2 LED Cable Assembly Type: M8 to M12 Number of Positions: 3 Cable Assembly Length: 1 m Cable Assembly Length: 3.2 ft M8/M12 Application Type: Sensor/Actuator M8 to M12 3 1 m 3.2 ft | M8 Male Straight To Female Led Double Ended Cable | Part Number: 1-2273124-3 | Internal Number: 1-2273124-3 | TE Connectivity RoHS : Compliant |
| 24 | ||
| 2273124-3 | TE Connectivity | M8 angled scket to M8 strght plug 2 LED Cable Assembly Type: M8 to M12 Number of Positions: 3 Cable Assembly Length: 1 m Cable Assembly Length: 3.2 ft M8/M12 Application Type: Sensor/Actuator M8 to M12 3 1 m 3.2 ft | M8 Male Straight To Female Led Double Ended Cable | Part Number: 2273124-3 | Internal Number: 2273124-3 | TE Connectivity RoHS : Compliant |
| 18 | ||
| 1-2432409-3 | TE Connectivity | RPQ-3-18 Part Number: 1-2432409-3 | Internal Number: 1-2432409-3 | TE Connectivity RoHS : Compliant |
| 3 | ||
| 1-2432409-0 | TE Connectivity | RPQ-3-13 Part Number: 1-2432409-0 | Internal Number: 1-2432409-0 | TE Connectivity RoHS : Compliant |
| 3 | ||
| 1-2432409-7 | TE Connectivity | RPQ-3-26 Part Number: 1-2432409-7 | Internal Number: 1-2432409-7 | TE Connectivity RoHS : Compliant |
| 3 | ||
| 1-2432408-0 | TE Connectivity | RPQ-1-35 Wiring Configuration: Single Phase Current Rating: 35 A Single Phase 35 A | Rpq | Part Number: 1-2432408-0 | Internal Number: 1-2432408-0 | TE Connectivity RoHS : Compliant |
| 2 | ||
| 1-2432408-2 | TE Connectivity | RPQ-1-45 Wiring Configuration: Single Phase Current Rating: 45 A Single Phase 45 A | Rpq | Part Number: 1-2432408-2 | Internal Number: 1-2432408-2 | TE Connectivity RoHS : Compliant |
| 2 | ||
| 1-2432408-5 | TE Connectivity | RPQ-1-75 Wiring Configuration: Single Phase Current Rating: 75 A Single Phase 75 A | Rpq | Part Number: 1-2432408-5 | Internal Number: 1-2432408-5 | TE Connectivity RoHS : Compliant |
| 2 | ||
| 1-2432408-3 | TE Connectivity | RPQ-1-50 Wiring Configuration: Single Phase Current Rating: 50 A Single Phase 50 A | Rpq | Part Number: 1-2432408-3 | Internal Number: 1-2432408-3 | TE Connectivity RoHS : Compliant |
| 2 | ||
| 1-2432409-6 | TE Connectivity | RPQ-3-25 Part Number: 1-2432409-6 | Internal Number: 1-2432409-6 | TE Connectivity RoHS : Compliant |
| 2 | ||
| 1-2432409-9 | TE Connectivity | RPQ-3-32 Part Number: 1-2432409-9 | Internal Number: 1-2432409-9 | TE Connectivity RoHS : Compliant |
| 2 | ||
| 1-2432408-6 | TE Connectivity | RPQ-1-100 Wiring Configuration: Single Phase Current Rating: 100 A Single Phase 100 A | Rpq | Part Number: 1-2432408-6 | Internal Number: 1-2432408-6 | TE Connectivity RoHS : Compliant |
| 2 | ||
| 1-2432408-1 | TE Connectivity | RPQ-1-40 Wiring Configuration: Single Phase Current Rating: 40 A Single Phase 40 A | Rpq | Part Number: 1-2432408-1 | Internal Number: 1-2432408-1 | TE Connectivity RoHS : Compliant |
| 2 | ||
![]() Venkel Ltd. | CR0805-10W-1243FT | VENKEL LTD | Chip Resistor;0805;1/10W;124K;�1% RoHS : Compliant | 24,703 | ||
| PWCR0805-RK-1243FT | VENKEL LTD | Pulse Withstanding CR;0805;1/8W;�100PPM;124K;�1% RoHS : Compliant | 0 | |||
| HPTF0603-QN-1243DT | VENKEL LTD | High Power Thin Film CR;0603;1/10W;�10PPM;124K ;�0.5% RoHS : Compliant | 0 | |||
| MELFC0102-UE-1243DT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/5W;�25PPM;124K;�0.5% RoHS : Compliant | 0 | |||
| MELFC0204-TC-1243BT | VENKEL LTD | MELF Coated Thin Film CR;0204;1/4W;�50PPM;124K;�0.1% RoHS : Compliant | 0 | |||
| HPTF0805-RN-1243DT | VENKEL LTD | High Power Thin Film CR;0805;1/8W;�10PPM;124K ;�0.5% RoHS : Compliant | 0 | |||
| HPTF1206-UC-1243BT | VENKEL LTD | High Power Thin Film CR;1206;1/3W;�50PPM;124K ;�0.1% RoHS : Compliant | 0 | |||
| PWCR1210-XK-1243FT | VENKEL LTD | Pulse Withstanding CR;1210;1W;�100PPM;124K;�1% RoHS : Compliant | 0 | |||
| MELFC0102-YE-1243FT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/3W;�25PPM;124K;�1% RoHS : Compliant | 0 | |||
| MELFC0102-UK-1243FT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/5W;�100PPM;124K;�1% RoHS : Compliant | 0 | |||
| MELFC0207-VZ-1243BT | VENKEL LTD | MELF Coated Thin Film CR;0207;1/2W;�15PPM;124K;�0.1% RoHS : Compliant | 0 | |||
| TFCR1206-4W-C-1243BT-1K | VENKEL LTD | Thin Film CR;1206;1/4W;�50PPM;124K ;�0.1% RoHS : Compliant | 0 | |||
| TFCR1210-4W-K-1243CT-1K | VENKEL LTD | Thin Film CR;1210;1/4W;�100PPM;124K ;�0.25% RoHS : Compliant | 0 | |||
| TFCR2010-4W-C-1243BT-1K | VENKEL LTD | Thin Film CR;2010;1/4W;�50PPM;124K ;�0.1% RoHS : Compliant | 0 | |||
| MELFC0102-RC-1243FT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/8W;�50PPM;124K;�1% RoHS : Compliant | 0 | |||
![]() Vyrian | MAX1243ACSA![]() | Maxim Integrated Products | ADC, Successive Approximation, 10-Bit, 1 Func, 1 Channel, Serial Access, CMOS, PDSO8 RoHS : Not Compliant | 13,167 | ||
| 55A0111-24-3 | TE Connectivity | Wire And Cable, 1 Conductor(s), 24AWG, 600V, Flexible Cord And Fixture Wire RoHS : Compliant | 12,062 | |||
| MAX1243ACSA+ | Analog Devices Inc | ADC, Successive Approximation, 10-Bit, 1 Func, 1 Channel, Serial Access, CMOS, PDSO8 RoHS : Compliant | 12,043 | |||
NBC12439AFN![]() | onsemi | Clock Generator, 800MHz, CMOS, PQCC28 RoHS : Not Compliant | 11,394 | |||
NBC12430FAR2![]() | onsemi | Clock Generator, 800MHz, CMOS, PQFP32 RoHS : Not Compliant | 11,295 | |||
| MAX1243ACSA+T | Analog Devices Inc | ADC, Successive Approximation, 10-Bit, 1 Func, 1 Channel, Serial Access, CMOS, PDSO8 RoHS : Compliant | 9,507 | |||
MAX1243AESA![]() | Maxim Integrated Products | ADC, Successive Approximation, 10-Bit, 1 Func, 1 Channel, Serial Access, CMOS, PDSO8 RoHS : Not Compliant | 8,525 | |||
| SN74ALS1243FN-00 | Texas Instruments | Bus Transceiver, ALS Series, 1-Func, 4-Bit, True Output, TTL, PQCC20 | 8,363 | |||
| 124390-HMC741ST89E | Analog Devices Inc | 6,980 | ||||
MAX1243BMJA![]() | Maxim Integrated Products | ADC, Successive Approximation, 10-Bit, 1 Func, 1 Channel, Serial Access, CMOS, CDIP8 RoHS : Not Compliant | 6,725 | |||
NBC12430FN![]() | onsemi | Clock Generator, 800MHz, CMOS, PQCC28 RoHS : Not Compliant | 6,159 | |||
| MAX1243BCSA+T | Analog Devices Inc | ADC, Successive Approximation, 10-Bit, 1 Func, 1 Channel, Serial Access, CMOS, PDSO8 RoHS : Compliant | 5,753 | |||
NBC12439AFNR2G![]() | onsemi | Clock Generator, 800MHz, CMOS, PQCC28 RoHS : Compliant | 4,324 | |||
| JDSE512-431 | Micron Technology, Inc | 3,917 | ||||
| 22.32.0.012.4320 | Finder | Contactors/Accessories | 228 | |||
![]() Waytek, Inc. | 124-911 124-314111 | White-Rodgers | Power Relay Contactor 24V 100A SPDT White-Rodgers 124-911 400A INRUSH ISOLATED COIL |
| 33 | |
| 124-910 124-305111 | White-Rodgers | Power Relay Contactor 12V 100A SPDT White-Rodgers 124-910 400A INRUSH ISOLATED COIL |
| 30 | ||
![]() Win Source Electronics | SX1243IULTRT | Semtech Corporation | Low Cost Low Current Integrated Transmitter 310 to 928MHz Frequency Agile | RF TX IC FHSS 310-450MHZ 8UFDFN RoHS : Compliant |
| 6,000 | |
SCM1243MF![]() | Sanken Electric Co Ltd | IC BRIDGE DRIVER PAR SCM33 RoHS : Compliant |
| 5,004 | ||
| ADS1243IPW | Texas Instruments |
| 3,500 | |||
ADS1243IPWRG4![]() | Texas Instruments | 24-Bit ANALOG-TO-DIGITAL CONVERTER RoHS : Compliant |
| 3,280 | ||
ADS1243IPWT![]() | Texas Instruments | IC ADC 24-BIT SER PROGBL 20TSSOP RoHS : Compliant |
| 3,260 | ||
ADS1243IPWTG4![]() | Texas Instruments | IC ADC 24-BIT SER PROGBL 20TSSOP RoHS : Compliant |
| 3,210 | ||
ADS1243IPWR![]() | Texas Instruments | IC ADC 24-BIT SER PROGBL 20TSSOP RoHS : Compliant |
| 3,160 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |