 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
1254-R2 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 Master Electronics | 125 | Switchcraft Conxall | The 125 is a 2-conductor single open circuit female cable mount extension jack designed for .141-inch diameter plugs. RoHS : Compliant |
| 457 | |
| 125 | Marathon Special Products | Conn Barrier Strip 50 POS 9.5mm Screw Panel Mount 20A RoHS : Compliant |
| 71 | ||
| 125 | Signal Transformer Inc | XFRMR NON-ISOL 230V-115V 250VA RoHS : Compliant |
| 0 | ||
| MW-20-03-G-D-125-125 | Samtec Inc | 1.00 mm Flex Stack Flexible Micro Board Stacker Surface Mount RoHS : Compliant |
| 0 | ||
| MTLW-125-06-L-S-125 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HMTMS-125-25-SM-D-125 | Samtec Inc | Conn Unshrouded Header HDR 50 POS 1.27mm Solder ST Thru-Hole RoHS : Compliant |
| 0 | ||
| MTMS-112-54-S-S-125 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MW-36-03-G-D-125-125 | Samtec Inc | 1.00 mm Flex Stack Flexible Micro Board Stacker Surface Mount RoHS : Compliant |
| 0 | ||
| CM125-LG/H-12-5/BO-BK | Phoenix Contact | Complete housing with vents Cross connection: without bus connector color: black width: 125 mm length: 102 mm height: 115.5 mm number of positions cross connector: not relevant RoHS : Compliant |
| 0 | ||
| S1251-25-300-4(B25) | TE Connectivity | MV SEALANTS & ADHESIVES MOQ Reduction RoHS : Compliant |
| 0 | ||
| MTMS-101-25-L-D-125 | Samtec Inc | .050 x .100 Variable Post Height Micro Terminal Strip RoHS : Compliant |
| 0 | ||
| MTLW-125-06-L-D-125 | Samtec Inc | .100 Low Profile Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTMM-125-05-F-D-125 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTMM-125-06-F-S-125 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTMM-125-06-L-Q-125 | Samtec Inc | RoHS : Compliant |
| 0 | ||
 Avnet Americas | 74LVC1G125GW,125 | Nexperia | - Tape and Reel (Alt: 74LVC1G125GW,125) RoHS : Compliant |
| 282,000 | |
74LVC2G125DC,125 | Nexperia | Buffer / Line Driver, 74LVC2G125, 2 Element, 1.65 V to 5.5 V, 8 Pins, VSSOP - Tape and Reel (Alt: 74LVC2G125DC,125) RoHS : Compliant |
| 39,000 | ||
| 74AHC1G125GW,125 | Nexperia | - Tape and Reel (Alt: 74AHC1G125GW,125) RoHS : Compliant |
| 36,000 | ||
| 74HC1G125GW,125 | Nexperia | Buffer / Line Driver, 74HC1G125, 2 V to 6 V, TSSOP-5 - Tape and Reel (Alt: 74HC1G125GW,125) RoHS : Compliant |
| 12,000 | ||
74HC1G125GV,125 | Nexperia | Buffer / Line Driver, 74HC1G125, 1 Element, 2 V to 6 V, 5 Pins, TSOP - Tape and Reel (Alt: 74HC1G125GV,125) RoHS : Compliant |
| 12,000 | ||
| 74AUP1G125GW,125 | Nexperia | Buffer / Line Driver, 74AUP1G125, 0.8 V to 3.6 V, TSSOP-5 - Tape and Reel (Alt: 74AUP1G125GW,125) RoHS : Compliant |
| 9,000 | ||
| 74HCT1G125GW,125 | Nexperia | - Tape and Reel (Alt: 74HCT1G125GW,125) RoHS : Compliant |
| 6,000 | ||
| 74AHCT1G125GW,125 | Nexperia | - Tape and Reel (Alt: 74AHCT1G125GW,125) RoHS : Compliant |
| 3,000 | ||
| AF2-1.25V125TM | AEM Inc | - Tape and Reel (Alt: AF2-1.25V125TM) RoHS : Not Compliant |
| 2,000 | ||
C2012X6S1C106K125AC | TDK Corporation | - Tape and Reel (Alt: C2012X6S1C106K125AC) RoHS : Compliant |
| 2,000 | ||
| 202K121-25/225-0 | TE Connectivity | - Bulk (Alt: 634051-000) RoHS : Compliant |
| 450 | ||
| DSC1123CI2-125.0000 | Microchip Technology Inc | - Rail/Tube (Alt: DSC1123CI2-125.0000) RoHS : Compliant |
| 220 | ||
| M85049/2125Z05B | Amphenol Corporation | STRAIGHT NON-ENVIRONMENTAL STRAIN RELIEF W/ SPIN COUPLING BACKSHELL FOR D38999 SERIES III & IV SIZE - Bulk (Alt: A850492125Z05B) RoHS : Not Compliant |
| 25 | ||
| LTMM-125-02-H-D | Samtec Inc | - Rail/Tube (Alt: LTMM-125-02-H-D) RoHS : Compliant |
| 17 | ||
| SHF-125-01-L-D-SM | Samtec Inc | - Rail/Tube (Alt: SHF-125-01-L-D-SM) RoHS : Compliant |
| 15 | ||
 Newark | 71251-250/0800 | PrehKeyTec | Socket, Din, Pcb, 5Pin; |Prehkeytec 71251-250/0800 RoHS : Compliant |
| 3,707 | |
| TW-07-03-L-D-125-125 | Samtec Inc | Conn Stack Brd, 2Mm, 14Pos, Hdr; |Samtec, Inc. TW-07-03-L-D-125-125 RoHS : Compliant |
| 416 | ||
| MTMS-101-25-T-S-125 | Samtec Inc | Pin Header, Board-To-Board, 1 Rows; |Samtec, Inc. MTMS-101-25-T-S-125 RoHS : Compliant |
| 312 | ||
| MTMM-125-05-G-S-125 | Samtec Inc | Hdr, Brd-To-Brd, 2Mm, 25Pos; |Samtec, Inc. MTMM-125-05-G-S-125 RoHS : Compliant |
| 228 | ||
| MTMM-125-09-G-D-125 | Samtec Inc | Hdr, Brd-To-Brd, 2Mm, 50Pos; |Samtec, Inc. MTMM-125-09-G-D-125 RoHS : Compliant |
| 177 | ||
| MTMM-125-06-S-D-125 | Samtec Inc | Hdr, Brd-To-Brd, 2Mm, 50Pos; |Samtec, Inc. MTMM-125-06-S-D-125 RoHS : Compliant |
| 177 | ||
| MTMS-112-51-G-D-125 | Samtec Inc | Hdr, Brd-To-Brd, 1.27Mm, 24Pos; |Samtec, Inc. MTMS-112-51-G-D-125 RoHS : Compliant |
| 140 | ||
| MTMS-125-25-S-S-125 | Samtec Inc | Hdr, Brd-To-Brd, 1.27Mm, 25Pos; |Samtec, Inc. MTMS-125-25-S-S-125 RoHS : Compliant |
| 111 | ||
| MTMS-125-52-T-D-125 | Samtec Inc | Hdr, Brd-To-Brd, 1.27Mm, 50Pos; |Samtec, Inc. MTMS-125-52-T-D-125 RoHS : Compliant |
| 96 | ||
| MTLW-125-06-S-D-125 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 50Pos; |Samtec, Inc. MTLW-125-06-S-D-125 RoHS : Compliant |
| 72 | ||
| 125 | Switchcraft Conxall | Conn Aud, 2Pos, Jack, 0.141 "; |Switchcraft/conxall 125 RoHS : Compliant |
| 62 | ||
| ORPK125A125 | Eaton Cutler-Hammer | Kep 125 Amp Plug Fro 125 Amp Frame; |Eaton Cutler Hammer ORPK125A125 RoHS : Not Compliant |
| 7 | ||
| R95-8M125-M125Q-P | Banner Engineering Corp | Molded Junction Box, 5P M12 Conn, 8Port; Input Connection Type:M12 Connector - 5 Pole; Output Type:M12 Connector - 5 Pole; No. Of Output Ports:8Ports; Product Range:-; Ip Rating:Ip65, Ip67, Ip68 Rohs Compliant: Yes |Banner Engineering R95-8M125-M125Q-P RoHS : Compliant |
| 4 | ||
| 125 | Legrand North America LLC | Lampholder To Outlet Adaptor; |Legrand Pass & Seymour 125 RoHS : Not Compliant |
| 0 | ||
| 125 | Marathon Special Products | Marathon Special Products; |Marathon Special Products 125 RoHS : Not Compliant |
| 0 | ||
 Analog Devices Inc | MAX1257BETM+ | Analog Devices Inc | 12-Bit, Multichannel ADCs/DACs RoHS : Compliant |
| 1,546 | |
| DS1250W-100IND+ | Analog Devices Inc | 3.3V 4096k Nonvolatile SRAM RoHS : Compliant |
| 745 | ||
| ADUM1251WARZ-RL7 | Analog Devices Inc | I2C isolator, 3V to 5.5V RoHS : Compliant |
| 58 | ||
| AD9645BCPZ-125 | Analog Devices Inc | 14Bit 125Msps Dual ADC w/seria RoHS : Compliant |
| 35 | ||
| DC2125A | Analog Devices Inc | LT4275/LT4321/LTM8027 Demo Boa |
| 34 | ||
| DS1100LU-125+ | Analog Devices Inc | 3-Volt 5-Tap Economy Timing El RoHS : Compliant |
| 27 | ||
| AD9265-FMC-125EBZ | Analog Devices Inc | 16 Bit 125 Msps high SNR 1.8 RoHS : Compliant |
| 20 | ||
AD9648BCPZ-125 | Analog Devices Inc | 14Bit125MSPS Dual 1.8V ADC par RoHS : Compliant |
| 7 | ||
| MAX11259PMB# | Analog Devices Inc | MAX11259PMB1# peripheral modul |
| 6 | ||
| AD9635BCPZ-125 | Analog Devices Inc | 12 Bit 125MSPS Dual ADCw/seria RoHS : Compliant |
| 3 | ||
| AD9640ABCPZ-125 | Analog Devices Inc | 14Bit 125Msps Dual 1.8V PB Fre RoHS : Compliant |
| 2 | ||
| LT1253CS8#TRPBF | Analog Devices Inc | L Cost 2x & 4x Video Amps RoHS : Compliant |
| 0 | ||
| LT1790AIS6-1.25#TRPBF | Analog Devices Inc | uP SOT-23 L Drop Ref Fam RoHS : Compliant |
| 0 | ||
| LT6657BHMS8-1.25#TRPBF | Analog Devices Inc | 1.5ppm/°C Drift, L N, Bufed Re RoHS : Compliant |
| 0 | ||
| LTC1258CS8-5#TRPBF | Analog Devices Inc | uP L Drop Refs RoHS : Compliant |
| 0 | ||
 RS | LRA911-RS-B/125N (LRA-76026504 | LRA911-RS-B/125N | LRA911RSB/125N) | Carling Technologies | SWITCH, SPST, 15 A, 250, ON-NONE-OFF, OFF-NONE-ON, RECTANGLE, RED, 1000 V, 0 C |
| 1,025 | |
| 1SNA125124R0100 (012512401) | TE Connectivity | M35/16.N TERMINAL BLUE, ENTRELEC |
| 798 | ||
| LRA211-RS-B/125N (LRA-70184500|LRA211-RS-B/125N|LRA211RSB/125N) | Carling Technologies | SWITCH;ROCKER;SPST;OFF-NONE-ON;TRANSL RED ROCKER;ILLUM;250V NEON;16A;125VAC;QC |
| 751 | ||
| LTA201-TR-B/125N (103-05237000 | LTA201-TR-B/125N | LTA201TRB/125N) | Carling Technologies | ROCKER SWITCH SPST OFF-NONE-ON 15A 125VAC ILLUMINATED RED ACTUATOR 0.25 QC TABS |
| 500 | ||
| LRA211-CR-B/125N (LRA-70956500|LRA211-CR-B/125N|LRA211CRB/125N) | Carling Technologies | SWITCH;ROCKER;SPST;OFF-NONE-ON;CLEAR RED ROCKER;ILLUM;250V NEON;16A;125VAC;QC |
| 146 | ||
| LRGSCK611-R-S-B-0/125N (LRG-35551010 | LRGSCK611-R-S-B-0/125N | LRGSCK611RSB0/12 | Carling Technologies | SWITCH, ROCKER, DPST, 15 A AT 250 VAC, 20 A AT 125 VAC, 125/250, ON-OFF, BLACK |
| 145 | ||
| 125 | Leviton Manufacturing Co | INDOOR LAMPHOLDER PLUG, 660W, 125V, 2 POLE, 2 WIRE, WHITE |
| 65 | ||
| 2451713 (25531252) (MPFFI-1001250-100RS) | RS Pro | SCREW, #10-32 X 1 1/4 PHILLIPS FLAT MACHINE, ZINC PLATED |
| 4 | ||
| KDS SC-M12-5A-M12-5A-P1-050 (50138184) | Leuze electronic GmbH + Co KG | DOUBLE ENDED IN-SERIES CORDSET, M12 MALE TO M12 FEMALE, 5 M, PUR, KDS SERIRES |
| 1 | ||
| 125 | Pass & Seymour | LAMPHOLDER TO OUTLET ADAPTOR |
| 0 | ||
| 125 | Ideal Industries Inc | TERMINAL BLOCK; 300V; MINIATURE; NYLON; TUBULAR CLAMP; 30-12 AWG; FLAT BASE |
| 0 | ||
| 125 | RACO | 4IN OCTAGON BOX 1-1/2 DEEP 1/2 KO |
| 0 | ||
| 125 | Arrow Hart | RECP SINGLE SURFACE 30A 125/250V 3P3W BK |
| 0 | ||
| 125 | Bimba Manufacturing Company | CYLINDER, O.L., CARBON STEEL ROD; 1-1/4IN BORE; STROKE: 5IN; BUMP |
| 0 | ||
| 125 | Switchcraft Conxall | CONN AV PHONE JACK 2 CONT SZ 0.141" CBL MNT INSULATED TINI-EXTENSION JAX RoHS : Compliant |
| 0 | ||
 STMicroelectronics | STL125N10F8AG | STMicroelectronics | Automotive N-channel 100 V, 4.6 mOhm max., 125 A STripFET F8 Power MOSFET in a PowerFLAT 5x6 package |
| 7,089 | |
74LCX125YMTR | STMicroelectronics | Low voltage CMOS quad bus buffer (3-State) with 5V tolerant inputs and outputs RoHS : Compliant |
| 3,827 | ||
| TS4061BICT-1.25 | STMicroelectronics | Precision micropower shunt voltage reference RoHS : Compliant |
| 2,301 | ||
74LCX125YTTR | STMicroelectronics | Low voltage CMOS quad bus buffer (3-State) with 5V tolerant inputs and outputs RoHS : Compliant |
| 1,616 | ||
| T1250-600G-TR | STMicroelectronics | 12A - Snubberless™ Triac in D2PAK RoHS : Compliant |
| 1,392 | ||
| STL125N8F7AG | STMicroelectronics | Automotive N-channel 80 V, 3.6 mOhm typ., 120 A, STripFET F7 Power MOSFET in a PowerFLAT 5x6 package RoHS : Compliant |
| 988 | ||
| STL125N10LF8AG | STMicroelectronics | Automotive N-channel logic level 100 V, 4.6 mOhm max., 119 A STripFET F8 Power MOSFET in a PowerFLAT 5x6 package |
| 792 | ||
LD39015M125R | STMicroelectronics | 150 mA low quiescent current low noise voltage regulator RoHS : Compliant |
| 537 | ||
| STGW28IH125DF | STMicroelectronics | 1250 V, 25 A IH series trench gate field-stop IGBT RoHS : Compliant |
| 316 | ||
| TS4061AICT-1.25 | STMicroelectronics | Precision micropower shunt voltage reference RoHS : Compliant |
| 30 | ||
| ST4E1250FIQT | STMicroelectronics | 50 Mbps, 3.3V / 5V full-duplex RS485 transceiver with ± 12 kV IEC 61000-4-2 contact ESD protection |
| 0 | ||
| STGWT20IH125DF | STMicroelectronics | 1250 V, 20 A IH series trench gate field-stop IGBT RoHS : Compliant |
| 0 | ||
| NTM88H125ST1 | STMicroelectronics | Tire pressure monitor sensor |
| 0 | ||
| TS4061BILT-1.25 | STMicroelectronics | Precision micropower shunt voltage reference RoHS : Compliant |
| 0 | ||
T1250H-6T | STMicroelectronics | 12 A - 600 V - 150 °C H-series Triacs RoHS : Compliant |
| 0 | ||
 Microchip Technology Inc | MIC37101-2.5YM | Microchip Technology Inc | LV, 1.0A uCap fixed Vout LDO, SOIC, Projected EOL: 2036-02-16 RoHS : Compliant |
| 4,560 | |
| DSC1525JI1A-125M0000 | Microchip Technology Inc | MEMS OSC, LVCMOS, 125MHz, 50ppm, 1.8v, -40 to 85C, 2.5x2.0mm, VLGA, Projected EOL: 2051-03-29 RoHS : Compliant |
| 3,002 | ||
| DSC1121AI2-053.1250 | Microchip Technology Inc | MEMS OSC, LVCMOS, 53.125MHz, 25PPM, 2.5-3.3V, -40 to 85C, 7.0 x 5.0mm, VDFN, Projected EOL: 2046-05-17 RoHS : Compliant |
| 2,405 | ||
| DSC1121AI1-125.0000 | Microchip Technology Inc | MEMS OSC, LVCMOS, 125MHz, 50PPM, 2.5-3.3V, -40 to 85C, 7.0 x 5.0mm, VDFN, Projected EOL: 2041-02-26 RoHS : Compliant |
| 2,405 | ||
| DSC1121BI5-125.0000 | Microchip Technology Inc | MEMS OSC, LVCMOS, 125MHz, 10PPM, 2.5-3.3V, -40 to 85C, 5.0x3.2mm, VDFN, Projected EOL: 2046-09-26 RoHS : Compliant |
| 2,271 | ||
| DSC1501MI2A-125M0000 | Microchip Technology Inc | MEMS Osc, Low Jitter, 125MHz, 2.5/3.3V, -40-85C, 25ppm, 2x1.6mm, VFLGA, Projected EOL: 2051-09-25 RoHS : Compliant |
| 1,345 | ||
| DSC1501MI2A-125M0000T | Microchip Technology Inc | MEMS Osc, Low Jitter, 125MHz, 2.5/3.3V, -40-85C, 25ppm, 2x1.6mm, 1k reel, VFLGA, Projected EOL: 2051-09-25 RoHS : Compliant |
| 1,345 | ||
| DSC1522ML2A-125M0000T | Microchip Technology Inc | MEMS OSC, LVCMOS, 125MHz, 25ppm, 2.5-3.3V, -40 to 105C, 2.0x1.6mm, VFLGA, Projected EOL: 2051-02-25 RoHS : Compliant |
| 1,345 | ||
| DSC1502AI3A-125M0000 | Microchip Technology Inc | MEMS OSC, LVCMOS, 125MHz, 20PPM, 2.5-3.3V, -40 to 85C, 7.0 x 5.0mm, VDFN, Projected EOL: 2050-12-21 RoHS : Compliant |
| 978 | ||
| DSC1522AL1A-125M0000 | Microchip Technology Inc | MEMS OSC, LVCMOS, 125MHz, 50ppm, 2.5-3.3V, -40 to 105C, 7.0x5.0mm, VDFN, Projected EOL: 2051-08-15 RoHS : Compliant |
| 978 | ||
| DSC1101BI2-125.0031T | Microchip Technology Inc | MEMS OSC, LVCMOS, 125.0031MHz, 25PPM, 2.5-3.3V, -40 to 85C, 5.0x3.2mm, VDFN, Projected EOL: 2046-09-03 RoHS : Compliant |
| 56 | ||
| MX573EBB125M000 | Microchip Technology Inc | Ultra-Low Jitter LVPECL XO, LLGA, Projected EOL: 2041-06-30 RoHS : Compliant |
| 15 | ||
| AGL125V5-CSG196 | Microchip Technology Inc | IGLOO FPGA, 1.5KLEs, TFBGA, Projected EOL: 2051-02-04 RoHS : Compliant |
| 10 | ||
| AGL125V2-CSG196I | Microchip Technology Inc | IGLOO FPGA, 1.5KLEs, TFBGA, Projected EOL: 2051-02-04 RoHS : Compliant |
| 8 | ||
| DSA1221CA2-125M0000VAO | Microchip Technology Inc | MEMS OSC, AUTO, LVCMOS, 125MHz, 25PPM, 2.5-3.3V, -40 to 125C, 3.2 x 2.5mm, VDFN, Projected EOL: 2051-06-23 RoHS : Compliant |
| 1 | ||
 Rochester Electronics | 74LVC1G125GM/S505,125 | NXP Semiconductors | Buffer/Line Driver Buffer, Non-Inverting 1 Element 1 Bits 1.8V, 2.5V, 3.3V, 5V 6-SON Tube RoHS : Compliant |
| 2,727 | |
| 74AHCT1G125GW/S400,125 | NXP Semiconductors | Buffer/Line Driver Buffer, Non-Inverting 1 Element 1 Bits 5V SOT-353 T/R RoHS : Compliant |
| 2,600 | ||
| 74LVC1G125GV/DG,125 | NXP Semiconductors | Bus Driver, LVC/LCX/Z Series, 1-Func, 1-Bit, True Output, CMOS, PDSO5 RoHS : Not Compliant |
| 64,288 | ||
74LVC1G125GW,125 | NXP Semiconductors | Buffer/Line Driver Buffer, Non-Inverting 1 Element 1 Bits 1.8V, 2.5V, 3.3V, 5V SOT-353 T/R RoHS : Compliant |
| 2,125 | ||
| 74HCT1G125GW/S400,125 | NXP Semiconductors | Buffer/Line Driver Buffer, Non-Inverting 1 Element 1 Bits 5V SOT-353 T/R RoHS : Compliant |
| 435 | ||
| 74LVC1G125GV/S505,125 | NXP Semiconductors | Buffer/Line Driver Buffer, Non-Inverting 1 Element 1 Bits 1.8V, 2.5V, 3.3V, 5V SOT-23-5 Tube RoHS : Compliant |
| 5,157 | ||
| XC7SET125GW,125 | NXP Semiconductors | Buffer/Line Driver Buffer, Non-Inverting 1 Element 1 Bits 5V SOT-353 T/R RoHS : Compliant |
| 50 | ||
74HC2G125GD,125 | NXP Semiconductors | Bus Driver, HC/UH Series, 2-Func, 1-Bit, True Output, CMOS, PDSO8 RoHS : Compliant |
| 5,600 | ||
| 74AHCT2G125DC,125 | Nexperia | Buffer/Line Driver Buffer, Non-Inverting 2 Element 1 Bits 5V 8-SOP T/R RoHS : Compliant |
| 3,039 | ||
| 74CBTLV1G125GV,125 | Nexperia | IC Bus Switch 1 Element 1 x 1:1 MUX/DEMUX 2.3V - 3.6V SOT-23-5 T/R RoHS : Compliant |
| 26,704 | ||
| 74LVC1G125GV,125 | Nexperia | Buffer/Line Driver Buffer, Non-Inverting 1 Element 1 Bits 1.8V, 2.5V, 3.3V, 5V SOT-23-5 T/R RoHS : Compliant |
| 2,400 | ||
74LVC2G125DP,125 | Nexperia | Buffer/Line Driver Buffer, Non-Inverting 2 Element 1 Bits 1.8V, 2.5V, 3.3V, 5V 8-SOP T/R RoHS : Compliant |
| 9,000 | ||
| 74HCT1G125GV,125 | Nexperia | Buffer/Line Driver Buffer, Non-Inverting 1 Element 1 Bits 5V SOT-23-5 T/R RoHS : Compliant |
| 42,000 | ||
| 74AHC2G125DP,125 | Nexperia | Buffer/Line Driver Buffer, Non-Inverting 2 Element 1 Bits 2.5V, 3.3V, 5V 8-SOP T/R RoHS : Compliant |
| 13,820 | ||
TLV71125125DSER | Texas Instruments | IC VOLT REG Fixed 2 REG 2.5V, 1.25V 200mA, 200mA 6-SON T/R RoHS : Compliant |
| 8,205 | ||
 Sager | 125 | Switchcraft Conxall | Phone Connectors .14 TINI PHONE JACK RoHS : Compliant |
| 3,756 | |
| MTMS-101-25-T-S-125 | Samtec Inc | Board to Board & Mezzanine Connectors .050 x .100 Variable Post Height Micro Terminal Strip RoHS : Compliant |
| 312 | ||
| MTMM-125-09-G-D-125 | Samtec Inc | Headers & Wire Housings Variable Post Height Header Strips, 2.00 mm Pitch RoHS : Compliant |
| 177 | ||
| MTMM-125-06-S-D-125 | Samtec Inc | Headers & Wire Housings Variable Post Height Header Strips, 2.00 mm Pitch RoHS : Compliant |
| 177 | ||
| MTMS-112-51-G-D-125 | Samtec Inc | Board to Board & Mezzanine Connectors .050 x .100 Variable Post Height Micro Terminal Strip RoHS : Compliant |
| 140 | ||
| MTMS-125-25-S-S-125 | Samtec Inc | Board to Board & Mezzanine Connectors .050 x .100 Variable Post Height Micro Terminal Strip RoHS : Compliant |
| 111 | ||
| 125 | Signal Transformer Inc | Autotransformers Step Down Auto Transformer | 0 | |||
| MW-20-03-G-D-125-125 | Samtec Inc | Board to Board & Mezzanine Connectors 1.00 mm Flex Stack, Flexible Micro Board Stacker, Surface Mount RoHS : Compliant |
| 0 | ||
| HMTMS-125-25-SM-D-125 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| PT3-125-125 | ABB Group | PT3-125-125 (H-6413) |
| 0 | ||
| MW-36-03-G-D-125-125 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| R11-2-5.00A-B125IH-V | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| MTMS-101-25-L-D-125 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| MTLW-125-06-L-D-125 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTMS-125-51-G-D-125 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
 Coilcraft Direct | XGL3512-521MEC | Coilcraft Inc | Power Inductor, shielded, composite, 20% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 6,995 | |
| XFL3012-561MEC | Coilcraft Inc | Power inductor, shielded, 20% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 4,120 | ||
| XFL3012-563MEC | Coilcraft Inc | Power inductor, shielded, 20% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 2,851 | ||
| YA9125-BED | Coilcraft Inc | Flyback Transformer, for Maxim Integrated MAX17690, isolation, SMT, RoHS RoHS : Compliant |
| 2,312 | ||
| CST1211-125LD | Coilcraft Inc | Transformer, current sense, SMT, RoHS RoHS : Compliant |
| 1,338 | ||
| LPD4012-561NRC | Coilcraft Inc | Power inductor, dual-wound, 20/30% tol, SMT, RoHS, lead-free, halogen-free RoHS : Compliant |
| 1,295 | ||
| CST2010-125LD | Coilcraft Inc | Current sensor, SMT, RoHS RoHS : Compliant |
| 222 | ||
| CST1-125LC | Coilcraft Inc | Current sensor, SMT, RoHS RoHS : Compliant |
| 88 | ||
| MVR1251T-251MLC | Coilcraft Inc | Power inductor, shielded, 20% tol, SMT, RoHS RoHS : Compliant |
| 44 | ||
| RFS1412-564KE | Coilcraft Inc | Power inductor, shielded, 10% tol, RoHS, halogen-free RoHS : Compliant |
| 16 | ||
| MVR1251T-361MLC | Coilcraft Inc | Power inductor, shielded, 20% tol, SMT, RoHS RoHS : Compliant |
| 15 | ||
| RFC0807B-125KE | Coilcraft Inc | Power inductor, 10% tol, RoHS, halogen-free RoHS : Compliant |
| 14 | ||
| CMT4-125-1L | Coilcraft Inc | Common mode choke, toroid, RoHS RoHS : Compliant |
| 8 | ||
| MVR1251T-561MLC | Coilcraft Inc | Power inductor, shielded, 20% tol, SMT, RoHS RoHS : Compliant |
| 0 | ||
| CST1211-125LDN | Coilcraft Inc | Transformer, current sense, SMT, RoHS RoHS : Compliant |
| 0 | ||
 Interstate Connecting Components | T1250102125-000 | TE Connectivity | H10B-TSB-M25 IP65 HOOD & HOUSING RoHS : Compliant |
| 14 | |
| T1250103125-000 | TE Connectivity | H10B-TSBS-M25 RoHS : Compliant |
| 0 | ||
| T1250242125-000 | TE Connectivity | H24B-TSB-M25 RoHS : Compliant |
| 0 | ||
| T1250163125-000 | TE Connectivity | H16B-TSBS-M25 RoHS : Compliant |
| 0 | ||
| T1250243125-100 | TE Connectivity | H24B-TSBS-M25 RoHS : Compliant |
| 0 | ||
| T1250243125-000 | TE Connectivity | H24B-TSBS-M25 RoHS : Compliant |
| 0 | ||
| M39012/56-3125 | Amphenol SV Microwave | SMA MALE CONNECTOR, R/A FOR RG INDIVIDUAL WITH PIECE PARTS - RoHS : Compliant |
| 0 | ||
| G3484-125-1.25NF | Glenair Inc | 0 | ||||
| T1250162125-000 | TE Connectivity | H16B-TSB-M25 RoHS : Compliant |
| 0 | ||
| 125-0701-251 | Cinch Connectivity Solutions |
| 0 | |||
| RBK-VWS-125-NR1-X-70MM | TE Connectivity | RoHS : Compliant |
| 0 | ||
| MWDM1L-100PCBRPT-.125 | Glenair Inc | MICRO-D CONNECTOR RoHS : Not Compliant |
| 0 | ||
| MWDM1L-15SBSPT-.125 | Glenair Inc | Glenair Micro D RoHS : Not Compliant |
| 0 | ||
| MWDM1L-31P-6C4-.125B | Glenair Inc | MICRO-D CONNECTOR RoHS : Not Compliant |
| 0 | ||
| MWDM1L-37SBST-.125 | Glenair Inc | RoHS : Not Compliant | 0 | |||
 Powell Electronics | TW-07-03-L-D-125-125 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 275 | |
| MTMS-101-25-T-S-125 | Samtec Inc | .050" x .100" Variable Post Height Micro RoHS : Compliant |
| 206 | ||
| MTMS-101-25-G-S-125 | Samtec Inc | .050" x .100" Variable Post Height Micro RoHS : Compliant |
| 206 | ||
| MTMM-125-05-G-S-125 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 150 | ||
| MTMM-125-09-G-D-125 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 117 | ||
| MTMM-125-06-S-D-125 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 117 | ||
| MTMM-125-03-G-D-125 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 117 | ||
| MTMS-112-51-G-D-125 | Samtec Inc | .050" x .100" Variable Post Height Micro RoHS : Compliant |
| 92 | ||
| TW-15-02-F-D-125-125 | Samtec Inc | HEADER 2.00MM 15POS 2ROW RoHS : Compliant |
| 84 | ||
| MTMS-125-25-S-S-125 | Samtec Inc | .050" x .100" Variable Post Height Micro RoHS : Compliant |
| 73 | ||
| MTMS-125-25-G-S-125 | Samtec Inc | .050" x .100" Variable Post Height Micro RoHS : Compliant |
| 73 | ||
| ZST-125-09-G-D-1255 | Samtec Inc | .100" Shrouded Elevated Terminal Strip, RoHS : Compliant |
| 65 | ||
| MTMS-125-52-T-D-125 | Samtec Inc | .050" x .100" Variable Post Height Micro RoHS : Compliant |
| 63 | ||
| T1250163125-000 | TE Connectivity | Power Connectors RoHS : Compliant |
| 50 | ||
| MTLW-125-06-S-D-125 | Samtec Inc | .100" Low Profile Variable Post Height T RoHS : Compliant |
| 48 | ||
 PUI | FCA-1.25A | 3,895 | ||||
| FXG-1.25A | 3,473 | |||||
| SCA-1.25A | 1,980 | |||||
| MIDA-125A | 1,069 | |||||
| FPK-1.25A | 923 | |||||
| FMR-1.25A | 295 | |||||
| F3T-125A | 229 | |||||
| TSA-1.25A-BP | 60 | |||||
| TPK-R-1.25A-BP | 32 | |||||
| FPK-1.25A-BP | 16 | |||||
| MIDA-125A-BP | 15 | |||||
| FSC-125MA-BP | 13 | |||||
| FSA-125MA-BP | 12 | |||||
| 0216.125VXP | 5 | |||||
| MOFR-M12-5 | 3 | |||||
 Chip 1 Exchange | 74LVC1G125GW125 | Nexperia | INSTOCK | 30,000 | ||
| RC1608J125CS | Samsung Electro-Mechanics | INSTOCK RoHS : Compliant | 20,824 | |||
| 74HC1G04GV,125 | Nexperia | INSTOCK RoHS : Compliant | 12,000 | |||
| 74LVC1G125GW125 | onsemi | INSTOCK | 2,600 | |||
74LVC1G08GW,125 | NXP Semiconductors | INSTOCK RoHS : Compliant | 2,506 | |||
74LVC2G125DP,125 | NXP Semiconductors | INSTOCK RoHS : Compliant | 2,425 | |||
| 74HCT125D | INSTOCK | 2,157 | ||||
| A3C40012545 | INSTOCK | 2,000 | ||||
| 74HCT125D | Philips Semiconductors | INSTOCK RoHS : Compliant | 1,306 | |||
| 74LVC1G125GW,125 | NXP Semiconductors | INSTOCK RoHS : Compliant | 1,282 | |||
| 74F125SJ | INSTOCK | 62 | ||||
| 74F125PC | National Semiconductor Corporation | INSTOCK RoHS : Not Compliant | 42 | |||
| CDRH125NP-470MC | INSTOCK | 19 | ||||
| 74AUP1G175GW;125 | NXP Semiconductors | INSTOCK | 8 | |||
| CDRH125NP-100MC | SUM | INSTOCK | 8 | |||
Avnet Asia | 74AUP1G125GW,125 | Nexperia | Buffer / Line Driver, 74AUP1G125, 0.8 V to 3.6 V, TSSOP-5 (Alt: 74AUP1G125GW,125) RoHS : Compliant |
| 27,000 | |
| CRCW0201255KFNED | Vishay Intertechnologies | CRCW0201 200 255K 1% ET7 e3 (Alt: CRCW0201255KFNED) RoHS : Compliant | 10,000 | |||
| 74AUP1G08GW,125 | Nexperia | Logic IC, AND Gate, Single, 2 Inputs, 5 Pins, TSSOP, 74AUP1G08 (Alt: 74AUP1G08GW,125) RoHS : Compliant |
| 6,000 | ||
74LVC125AD,118 | Nexperia | (Alt: 74LVC125AD,118) RoHS : Compliant |
| 5,000 | ||
| 74LVC2G125DP,125 | Nexperia | (Alt: 74LVC2G125DP,125) RoHS : Compliant | 3,000 | |||
| 74AHC2G125DC,125 | Nexperia | Buffer / Line Driver, Non Inverting, 74AHC2G125, 2 Element, 2 V to 5.5 V, 8 Pins, VSSOP (Alt: 74AHC2G125DC,125) RoHS : Compliant |
| 3,000 | ||
| 74HCT2G125DP,125 | Nexperia | Buffer / Line Driver, 74HCT2G125, 2 Element, 4.5 V to 5.5 V, 8 Pins, TSSOP (Alt: 74HCT2G125DP,125) RoHS : Compliant |
| 3,000 | ||
| 74LVC2G125DC,125 | Nexperia | Buffer / Line Driver, 74LVC2G125, 2 Element, 1.65 V to 5.5 V, 8 Pins, VSSOP (Alt: 74LVC2G125DC,125) RoHS : Compliant |
| 3,000 | ||
| CDEP147NP-100MC-125 | Sumida Corporation | (Alt: CDEP147NP-100MC-125) RoHS : Compliant | 3,000 | |||
| 74AUP1G38GW,125 | Nexperia | (Alt: 74AUP1G38GW,125) RoHS : Compliant | 3,000 | |||
T495X226K035ATE125 | KEMET Corporation | Surface Mount Tantalum Capacitor, 22 uF, 35 V, 2817 [7143 Metric], ? 10%, 125 mohm, 1.149 A (Alt: T495X226K035ATE125) RoHS : Compliant |
| 2,500 | ||
| FSH-125-04-F-DH-SL-FR | Samtec Inc | (Alt: FSH-125-04-F-DH-SL-FR) RoHS : Compliant |
| 825 | ||
| SPC1251H1-003-5GT30G-50 | Amphenol Corporation | AHLSPC1251H1-003-5GT30G-50 SMB 3P SMD (Alt: SPC1251H1-003-5GT30G-50) RoHS : Compliant |
| 300 | ||
| JX41250506 | Amphenol Corporation | (Alt: JX41250506) RoHS : Compliant |
| 120 | ||
| 125 | Switchcraft Conxall | .141" TINI Female Cable Mount Extension Jack (Alt: 125) RoHS : Compliant | 0 | |||
 DB Roberts | 012520R125B | Essentra Components | 14-20 X1-14 ROUND HD SLOTTED B | 0 | ||
| 27XT1250125 | Essentra Components | 0 | ||||
| SFP11251250A | Essentra Components | TAPERED PLUGSILICON NATURAL | 0 | |||
| 27XT1250125N | Essentra Components | 0 | ||||
| 012520G125 | Essentra Components | SET SCREW, SLOTTED HEAD, 14-20 | 0 | |||
| 012520R125 | Essentra Components | 0 | ||||
| 5731-N-125-125-093 | RAF Electronic Hardware | 0 | ||||
| 012520P125B | Essentra Components | PAN SLOTTED SCREW, 14-20 THREA | 0 | |||
| 012520X125 | Essentra Components | HEX SLOTTED SCREW, 14-20 THREA | 0 | |||
| 27KY1250125 | Essentra Components | Key Hole Clip - ; Compatible P 0.126 in;Natural Nylon 6/6 | 0 | |||
| 012520S125 | Essentra Components | SET SCREW, SLOTTED HEAD, 14-20 | 0 | |||
| 012520B125 | Essentra Components | BINDER SLOTTED SCREW, 14-20 TH | 0 | |||
| E3-1251-125 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| 012520B125B | Essentra Components | 14-20 X 1-14 BINDER HEAD SLOT | 0 | |||
| XT1250125A | Essentra Components | 0 | ||||
 Flip Electronics | NCP81253BMNTBG | onsemi | Stock, Ship Today |
| 1,146,330 | |
| NC7SP125L6X | onsemi | Stock, Ship Today RoHS : Compliant |
| 305,000 | ||
CM1250-04QG | onsemi | Stock, Ship Today RoHS : Compliant |
| 123,000 | ||
| NLV74HCT125ADR2G | onsemi | Stock, Ship Today RoHS : Compliant |
| 72,488 | ||
| MC74HCT125ADTG | onsemi | Stock, Ship Today RoHS : Compliant |
| 70,769 | ||
| FST3125MX | onsemi | Stock, Ship Today RoHS : Compliant |
| 60,000 | ||
| 74LVTH125MTCX | onsemi | Stock, Ship Today RoHS : Compliant |
| 4,140 | ||
| CYPD4125-40LQXI | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 3,203 | ||
| MC74VHC1GT125EDFT2G | onsemi | Stock, Ship Today RoHS : Compliant | 2,700 | |||
| DF71251AN50FPV | Renesas Electronics Corporation | Stock | 1,078 | |||
| EP2AGX125DF25C6 | Altera Corporation | Stock RoHS : Not Compliant | 1,056 | |||
| CY8C4125LQI-PS423 | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 980 | ||
| CY8C4125AXI-483 | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 817 | ||
| CY8C4125AXI-473 | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 739 | ||
| MC8640HX1250HE | NXP Semiconductors | Stock RoHS : Not Compliant | 145 | |||
 Pasternack Enterprises US | PE36125-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.6/5.6, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: 1.6/5.6, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm, Length: 12 inches. 75 Ohm 1.6/5.6 Plug Right Angle to 75 Ohm 1.6/5.6 Plug Right Angle Cable 12 Inch Length Using 75 Ohm RG187 Coax., Radio frequency assembly 75 Ohm 1.6/5.6 plug right angle to 75 Ohm 1.6/5.6 plug right angle cable 12 inch length using 75 Ohm RG187 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm 1.6/5.6 plug right angle to 75 Ohm 1.6/5.6 plug right angle cable 12 inch length using 75 Ohm RG187 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.6/5.6 to 1.6/5.6 cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle 1.6/5.6 cable connection on one end and right angle 1.6/5.6 cable connection on the other. Our right angle 1.6/5.6 to right angle 1.6/5.6 cable assemblies have a plug gender on end 1 and plug on end 2. This 1.6/5.6 to 1.6/5.6 cable is a plug to plug coax assembly, PE36125-12, can also be known as a right angle 1.6/5.6 male to right angle 1.6/5.6 male cable assembly and will be shipped same-day as it is purchased. 1.6/5.6 male to 1.6/5.6 male cable assembly PE36125-12 is built with RG187 which is a flexible coax type. The Pasternack flexible 1.6/5.6 cable assembly is manufactured with right angle 1.6/5.6 to right angle 1.6/5.6 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1.6/5.6 right angle plug to 1.6/5.6 right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1.6/5.6 right angle male to 1.6/5.6 right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.6/5.6 to 1.6/5.6 cable assembly for quick shipment worldwide. Variations of 1.6/5.6 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.6/5.6 plug right angle to 75 Ohm 1.6/5.6 plug right angle cable 12 inch length using 75 Ohm RG187 coax. |
| 191 | |
| PE3FCA231-25M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM5, Fiber Diameter: 50/125, Cable Assembly Color: Lime Green, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: SC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 4.5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 4-Fiber LC UPC to SC UPC, OM5 Multimode Indoor Distribution Cable, 4.5mm LSZH, 2.0mm breakout, Lime Green-25M. Pasternack’s PE3FCA231-25M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 25-meter long 4-fiber cable assembly is equipped with LC/UPC to SC/UPC connectors. Our lime green fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM5 fiber that offers cutting-edge Wideband Multimode Fiber (WBMMF) technology, supporting at least four WDM channels at 28 Gbps per channel over the 850-953nm wavelength range and a bandwidth of 28000 MHz·km. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 4-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA231-25M fiber optic cable with a 4.5 mm cable diameter and 34 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/UPC to SC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Our fiber optic breakout assembly is engineered for indoor high-speed deployments, guarantees reliability and superior signal integrity. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM5 multimode fiber optic cable that meets your requirements. |
| 132 | ||
| PE3FCA551-25M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 50 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: APC, Connector 2 Series: SC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 4.5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 4-Fiber SC APC to SC UPC, OS2 Single Mode Indoor Distribution Cable, 4.5mm Riser, 2.0mm breakout, Yellow-25M. Pasternack’s PE3FCA551-25M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 25-meter long 4-fiber cable assembly is equipped with SC/APC to SC/UPC connectors. Our yellow fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly has a single mode OS2 fiber that offers ultra-low attenuation over distances up to 10km for 10G Ethernet and beyond with a 9/125µm core size. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA551-25M fiber optic cable with a 4.5 mm cable diameter and 34 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of SC/APC to SC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. This OS2 fiber optic assembly is designed for enterprise backbones, long-haul networking, and high-speed data transmission and delivers exceptional reliability for critical infrastructure deployments. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 103 | ||
| PE3W01125-9 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR047FL, RF Cable Type: PE-SR047FL, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. SMP Female Right Angle to SMP Female Right Angle Cable 9 Inch Length Using PE-SR047FL Coax., Radio frequency assembly SMP female right angle to SMP female right angle cable 9 inch length using PE-SR047FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female right angle to SMP female right angle cable 9 inch length using PE-SR047FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMP cable connection on one end and right angle SMP cable connection on the other. Our right angle SMP to right angle SMP cable assemblies have a female gender on end 1 and female on end 2. PE3W01125-9 can also be known as a right angle SMP jack to right angle SMP jack cable assembly and will be shipped same-day as it is purchased. SMP jack to SMP jack cable assembly PE3W01125-9 is built with PE-SR047FL which is a formable coax type. The Pasternack formable SMP cable assembly is manufactured with right angle SMP to right angle SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMP right angle female to SMP right angle female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMP right angle jack to SMP right angle jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMP female right angle to SMP female right angle cable 9 inch length using PE-SR047FL coax. |
| 55 | ||
| PE3FCA201-25M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM4, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 4.5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 4-Fiber LC UPC to LC UPC, OM4 Multimode Distribution Cable, 4.5mm LSZH, 2.0mm breakout, Aqua-25M. Pasternack’s PE3FCA201-25M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 25-meter long 4-fiber cable assembly is equipped with LC/UPC to LC/UPC connectors. Our aqua blue fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM4 fiber that supports 10Gb Ethernet up to 550 meters and 40G/100G Ethernet up to 150 meters and a bandwidth of 4700 MHz.km that delivers low attenuation and high-speed performance for mission-critical applications. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 4-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA201-25M fiber optic cable with a 4.5 mm cable diameter and 34 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/UPC to LC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Our fiber optic breakout assembly is designed for hyperscale data centers and telecom backbones and ensures seamless network connectivity with minimal signal loss. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM4 multimode fiber optic cable that meets your requirements. |
| 39 | ||
| PE36125-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.6/5.6, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: 1.6/5.6, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm, Length: 60 inches. 75 Ohm 1.6/5.6 Plug Right Angle to 75 Ohm 1.6/5.6 Plug Right Angle Cable 60 Inch Length Using 75 Ohm RG187 Coax., Radio frequency assembly 75 Ohm 1.6/5.6 plug right angle to 75 Ohm 1.6/5.6 plug right angle cable 60 inch length using 75 Ohm RG187 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm 1.6/5.6 plug right angle to 75 Ohm 1.6/5.6 plug right angle cable 60 inch length using 75 Ohm RG187 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.6/5.6 to 1.6/5.6 cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle 1.6/5.6 cable connection on one end and right angle 1.6/5.6 cable connection on the other. Our right angle 1.6/5.6 to right angle 1.6/5.6 cable assemblies have a plug gender on end 1 and plug on end 2. This 1.6/5.6 to 1.6/5.6 cable is a plug to plug coax assembly, PE36125-60, can also be known as a right angle 1.6/5.6 male to right angle 1.6/5.6 male cable assembly and will be shipped same-day as it is purchased. 1.6/5.6 male to 1.6/5.6 male cable assembly PE36125-60 is built with RG187 which is a flexible coax type. The Pasternack flexible 1.6/5.6 cable assembly is manufactured with right angle 1.6/5.6 to right angle 1.6/5.6 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1.6/5.6 right angle plug to 1.6/5.6 right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1.6/5.6 right angle male to 1.6/5.6 right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.6/5.6 to 1.6/5.6 cable assembly for quick shipment worldwide. Variations of 1.6/5.6 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.6/5.6 plug right angle to 75 Ohm 1.6/5.6 plug right angle cable 60 inch length using 75 Ohm RG187 coax. |
| 38 | ||
| PE3C5125 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. N Male to SMA Male Right Angle Cable Using RG58 Coax., Radio frequency assembly N male to SMA male right angle cable using RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to SMA male right angle cable using RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and right angle SMA cable connection on the other. Our N type to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This type N to SMA cable is a male to male coax assembly, PE3C5125, can also be known as a type N plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. N type plug to SMA plug cable assembly PE3C5125 is built with RG58 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5 GHz maximum frequency type N male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5125 can also be used in the other direction and will be right angle SMA male to type N male cable assembly if the opposite connectivity is required. N type plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to SMA male right angle cable using RG58 coax. | 0 | |||
| PE3W06125LF/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. TNC Male Right Angle to SMA Male Right Angle Low Loss Cable 48 Inch Length Using LMR-200 Coax with HeatShrink, LF Solder., Radio frequency assembly TNC male right angle to SMA male right angle low loss cable 48 inch length using LMR-200 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to SMA male right angle low loss cable 48 inch length using LMR-200 coax with heatshrink, LF solder, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle TNC cable connection on one end and right angle SMA cable connection on the other. Our low loss right angle TNC to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W06125LF/HS-48 can also be known as a low loss right angle TNC plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. TNC plug to SMA plug cable assembly PE3W06125LF/HS-48 is built with LMR-200 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC right angle male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06125LF/HS-48 can also be used in the other direction and will be right angle SMA male to right angle TNC male cable assembly if the opposite connectivity is required. Low loss TNC right angle plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male right angle to SMA male right angle low loss cable 48 inch length using LMR-200 coax with heatshrink, LF solder. |
| 0 | ||
| PE3W12532LF | Pasternack Enterprises | 0 | ||||
| PE3W12573LF-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Male to SMA Male Low Loss Cable 24 Inch Length Using LMR-195-UF Coax, LF Solder., Radio frequency assembly N male to SMA male low loss cable 24 inch length using LMR-195-UF coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to SMA male low loss cable 24 inch length using LMR-195-UF coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a SMA cable connection on the other. Our low loss type N to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W12573LF-24 can also be known as a low loss type N plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W12573LF-24 RF cable has a TPE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 74% and a minimum RF shielding of 90 dB. Our type N male to SMA male cable has a maximum VSWR of 1.4:1. Type N plug to SMA plug cable assembly PE3W12573LF-24 is built with LMR-195-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W12573LF-24 can also be used in the other direction and will be a SMA male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W12590 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-FR, RF Cable Type: LMR-400-FR, RF Cable Impedance: 50 Ohm. N Male to N Male Right Angle Cable Using LMR-400-FR Coax. PE3W12590 is a N male to N male right angle cable using LMR-400-FR coax. This Pasternack N male to N male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W12590 N male to N male right angle cable assembly is constructed with LMR-400-FR coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W21257/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. MCX Plug Right Angle to BNC Male Right Angle Cable Using LMR-100 Coax with HeatShrink. PE3W21257/HS is a MCX plug right angle to BNC male right angle cable using LMR-100A coax. This Pasternack MCX plug right angle to BNC male right angle cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm BNC for connector 2. MCX right angle to BNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MCX right angle to male BNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21257/HS MCX plug right angle to BNC male right angle cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W01254/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm. 75 Ohm SMB Plug Right Angle to 75 Ohm TNC Female Bulkhead Cable Using 75 Ohm RG179 Coax with HeatShrink. PE3W01254/HS is a SMB plug right angle to TNC female bulkhead cable using RG179 coax. This Pasternack SMB plug right angle to TNC female bulkhead cable assembly uses a 75 Ohm SMB for connector 1 and a 75 Ohm TNC for connector 2. SMB right angle to TNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug SMB right angle to female TNC bulkhead cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE3W01254/HS SMB plug right angle to TNC female bulkhead cable assembly is constructed with RG179 coax. | 0 | |||
| PE3W03125/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Female Bulkhead to SMA Male Low Loss Cable 48 Inch Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly SMA female bulkhead to SMA male low loss cable 48 inch length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA female bulkhead to SMA male low loss cable 48 inch length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA bulkhead cable connection on one end and SMA cable connection on the other. Our low loss SMA to SMA cable assemblies have a female gender on end 1 and male on end 2. PE3W03125/HS-48 can also be known as a low loss SMA jack to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA plug cable assembly PE3W03125/HS-48 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this SMA female bulkhead to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W03125/HS-48 can also be used in the other direction and will be SMA male to SMA female bulkhead cable assembly if the opposite connectivity is required. Low loss SMA jack bulkhead to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female bulkhead to SMA male low loss cable 48 inch length using LMR-100 coax with heatshrink. |
| 0 | ||
| PE3W08125/HS | Pasternack Enterprises | 0 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼ 
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand