15AVB2-R1 Price, Distributor, Stock

Key Specifications, Gain: 40 dB, Power Output: 12 dBm P1dB, Frequency, Min: 1.2 GHz, Frequency, Max: 1.6 GHz, Noise Figure, Max: 0.8 dB, Design: Low Noise, Voltage, DC Max: 15 Volts, Current, DC Max: 120 mA, Connector Series: SMA. 40 dB Gain, 0.7 dB NF, 12 dBm P1dB, 1.2 GHz to 1.6 GHz, Low Noise Amplifier, SMA. PE15A1028 low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise amplifier uses SMA connectors at 50 Ohm. This SMA low noise amplifier has a minimum frequency of 1.2 GHz and maximum frequency of 1.6 GHz. The significantly low noise figure of this radio frequency amplifier is 0.8 dB with a typical gain of 40 dB. LNA amplifier PE15A1028 is rated at 15 Volts DC maximum and 120 mA. Our low noise radio frequency LNA amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial millimeter wave low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts.

1 : $1,180.0
5 : $1,132.8
10 : $1,085.6

PE15A3294

Pasternack Enterprises

Key Specifications, Power Output: 10 dBm P1dB, Frequency, Min: 6 GHz, Frequency, Max: 18 GHz, Gain, Min: 30 dB, RF Input VSWR Max: 2:1, RF Output VSWR Max: 2:1, Connector Series: SMA. 2.5 dB NF, 10 dBm P1dB, 6 GHz to 18 GHz, Low Noise Broadband Amplifier, 30 dB Gain, SMA. PE15A3294 low noise broadband amplifier from Pasternack is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise broadband amplifier uses SMA connectors at 50 Ohm. This SMA broadband low noise amplifier has wide-band capability with a minimum frequency of 6 GHz and maximum frequency of 18 GHz. The minimum gain of this broad-band low noise radio frequency amplifier is 30 dB. Pasternack broadband low noise amplifier PE15A3294 is rated at 10 dBm P1dB, 2:1 input VSWR maximum and 2:1 output VSWR max. Our broad band low noise radio frequency amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial broadband low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts.

1 : $3,190.0
5 : $3,062.4
10 : $2,934.8

PE15A63016

Pasternack Enterprises

1 : $1,290.0
5 : $1,238.4
10 : $1,186.8
25 : $1,135.2

PE15A1073

Pasternack Enterprises

Key Specifications, Gain: 44 dB, Power Output: 25 dBm Psat, Frequency, Min: 5 GHz, Frequency, Max: 13 GHz, Noise Figure, Max: 3.5 dB, Design: GaN Input Protected Low Noise, Voltage, DC Max: 28 Volts, Current, DC Max: 300 mA, Connector Series: SMA. 1.8 dB NF GaN Input Protected Low Noise Amplifier, Operating from 5 GHz to 13 GHz with 44 dB Gain, 25 dBm Psat and SMA. PE15A1073 gan input protected low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized gan input protected low noise amplifier uses SMA connectors at 50 Ohm. This SMA gan input protected low noise amplifier has a minimum frequency of 5 GHz and maximum frequency of 13 GHz. The significantly low noise figure of this radio frequency amplifier is 3.5 dB with a typical gain of 44 dB. gan input protected LNA amplifier PE15A1073 is rated at 28 Volts DC maximum and 300 mA. Our gan input protected low noise radio frequency LNA amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial millimeter wave gan input protected low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts.

1 : $3,610.0
5 : $3,465.6
10 : $3,321.2
25 : $3,176.8

PE15A3017

Pasternack Enterprises

Key Specifications, Power Output: 27 dBm P1dB, Frequency, Min: 6 GHz, Frequency, Max: 18 GHz, Gain, Min: 36 dB, RF Input VSWR Max: 2:1, RF Output VSWR Max: 2:1, Connector Series: SMA. 500 mW P1dB, 6 GHz to 18 GHz, Medium Power Broadband Amplifier, 36 dB Gain, SMA. PE15A3017 medium power broadband amplifier from Pasternack is featured in our extensive in-stock RF amplifier selection. Our connectorized medium power broadband amplifier uses SMA connectors at 50 Ohm. This SMA broadband amplifier has wide-band capability with a minimum frequency of 6 GHz and maximum frequency of 18 GHz. The minimum gain of this broad-band radio frequency amplifier is 36 dB. Pasternack broadband amplifier PE15A3017 is rated at 27 dBm P1dB, 2:1 input VSWR maximum and 2:1 output VSWR max. Our broad band radio frequency amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial broadband amplifier can ship worldwide the same day of the purchase as with our other available RF parts.

1 : $2,740.0
5 : $2,630.4
10 : $2,520.8

PE15A3305

Pasternack Enterprises

Key Specifications, Power Output: 11 dBm P1dB, Frequency, Min: 18 GHz, Frequency, Max: 40 GHz, Gain, Min: 40 dB, Gain, Typical: 44 dB, Noise Figure, Max: 4.5 dB, RF Input VSWR Max: 2.3:1, RF Output VSWR Max: 2.3:1, Connector Series: 2.92mm. 44 dB Gain, 4 dB NF, 11 dBm P1dB, 18 GHz to 40 GHz, Low Noise Broadband Amplifier, 2.92mm. PE15A3305 low noise broadband amplifier from Pasternack is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise broadband amplifier uses 2.92mm connectors at 50 Ohm. This 2.92mm broadband low noise amplifier has wide-band capability with a minimum frequency of 18 GHz and maximum frequency of 40 GHz. The minimum gain of this broad-band low noise radio frequency amplifier is 40 dB with a typical gain of 44 dB. Pasternack broadband low noise amplifier PE15A3305 is rated at 11 dBm P1dB, 2.3:1 input VSWR maximum and 2.3:1 output VSWR max. Our broad band low noise radio frequency amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial broadband low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts.

1 : $8,800.0
5 : $8,448.0
10 : $8,096.0

PE15A5006

Pasternack Enterprises

Key Specifications, Frequency, Min: 2.5 GHz, Frequency, Max: 4 GHz, Gain, Typical: 19 dB, 1dB Compression Point, Min: 34 dBm, 3rd Intercept Point, Typ: 45 dB, Voltage, DC Max: 13 Volts, Current, DC Typ: 400 mA. 7 Watt Psat, 2.5 GHz to 4 GHz, High Power GaAs Amplifier, SMA Input, SMA Output, 19 dB Gain, 45 dBm IP3, 8 dB NF. RF solid state power amplifier (SSPA) PE15A5006 from Pasternack is part of the largest selection of in-stock radio frequency microwave and millimeter wave amplifiers available for same-day shipment. This Pasternack solid state RF power amplifier is a high power amp design constructed in a connectorized package. Our SSPA is designed with SMA connectors and rated at 7 Watts. Pasternack solid state power amplifier part number PE15A5006 SMA high power amp has a 19 dB typical gain. The high power medium gain amp is rated with a Psat of 38.5 dBm. Our radio frequency high power solid state amplifier is constructed for minimum frequency of 2.5 GHz and a maximum frequency of 4 GHz. Additional radio frequency specs on this high frequency medium gain high power solid state power amplifier from Pasternack can be found in the details on the RF power amplifier datasheet specifications PDF above. Our high power medium gain HF amplifier is part of over one 40,000 RF, microwave and millimeter wave components in-stock. This high power 7 Watt radio frequency amplifier is ready for same day purchase and shipping worldwide. Pasternack also stocks a wide range of other radio signal SSPAs that ship same-day from our facility for all your RF, microwave and millimeter wave amplifier component needs.

1 : $3,260.0
5 : $3,129.6
10 : $2,999.2

PE15A1061

Pasternack Enterprises

Key Specifications, Gain: 25 dB, Power Output: 18 dBm P1dB, Frequency, Min: 20 MHz, Frequency, Max: 4 GHz, Noise Figure, Max: 2.5 dB, Design: Low Noise, Voltage, DC Max: 5.5 Volts, Current, DC Max: 180 mA, Connector Series: SMA. 2 dB NF Low Noise Amplifier, Operating from 20 MHz to 4 GHz with 25 dB Gain, 18 dBm P1dB and SMA. PE15A1061 low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise amplifier uses SMA connectors at 50 Ohm. This SMA low noise amplifier has a minimum frequency of 20 MHz and maximum frequency of 4 GHz. The significantly low noise figure of this radio frequency amplifier is 2.5 dB with a typical gain of 25 dB. LNA amplifier PE15A1061 is rated at 5.5 Volts DC maximum and 180 mA. Our low noise radio frequency LNA amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial millimeter wave low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts.

1 : $1,770.0
5 : $1,699.2
10 : $1,628.4

PE15A5079

Pasternack Enterprises

Key Specifications, Frequency, Min: 4.4 GHz, Frequency, Max: 4.9 GHz, Gain, Typical: 48 dB, 3rd Intercept Point, Typ: 44 dB, Voltage, DC Typ: 28 Volts, Voltage, DC Max: 32 Volts. 20 Watt GaN Power Amplifier, 4400 MHz to 4900 MHz, Class AB, C-Band, 30% Efficiency, 28V, SMA. RF solid state power amplifier (SSPA) PE15A5079 from Pasternack is part of the largest selection of in-stock radio frequency microwave and millimeter wave amplifiers available for same-day shipment. This Pasternack solid state RF power amplifier is a medium power amp design constructed in a connectorized package. Our SSPA is designed with SMA connectors and rated at 20 dBm. Pasternack solid state power amplifier part number PE15A5079 SMA medium power amp has a 48 dB typical gain. The medium power high gain amp is rated with a Psat of 20 dBm. Our radio frequency medium power solid state amplifier is constructed for minimum frequency of 4.4 GHz and a maximum frequency of 4.9 GHz. Additional radio frequency specs on this high frequency high gain medium power solid state power amplifier from Pasternack can be found in the details on the RF power amplifier datasheet specifications PDF above. Our medium power high gain HF amplifier is part of over one 40,000 RF, microwave and millimeter wave components in-stock. This medium power 20 dBm radio frequency amplifier is ready for same day purchase and shipping worldwide. Pasternack also stocks a wide range of other radio signal SSPAs that ship same-day from our facility for all your RF, microwave and millimeter wave amplifier component needs.

1 : $14,700.0
5 : $14,406.0
10 : $14,112.0
25 : $13,818.0

PE15A3022F

Pasternack Enterprises

Key Specifications, Frequency, Min: 2 GHz, Frequency, Max: 18 GHz, Gain, Min: 34 dB, Gain, Typical: 37 dB, 1dB Compression Point, Min: 29.5 dBm, 3rd Intercept Point, Typ: 42 dB, Voltage, DC Max: 15 Volts, Current, DC Typ: 800 mA. 1 Watt P1dB, 2 to 18 GHz, Medium Power Amplifier, 37 dB Gain, 42 dBm IP3, 3 dB NF, SMA, with Heat Sink., The PE15A3022F RF power amplifier with heatsink from Pasternack is featured in our extensive in-stock radio frequency amplifier selection. Our DC powered modules with integrated heatsink RF amplifier uses SMA connectors with female gender configuration and has an impedance of 50 Ohm. This SMA power amplifier has a minimum frequency of 2 GHz and maximum frequency of 18 GHz. The minimum gain of this DC powered modules with integrated heatsink amplifier is 34 dB with a typical gain of 37 dB. Make your online purchase right now to take advantage of our same business day shipping. The PE15A3022F RF power amplifier from Pasternack has a 3 dB typical noise figure. This RF power amplifier comes with 4.5 dB of typical noise figure and typical reverse isolation of 60 dB. The amplifier has a maximum VSWR of 2.2:1 at its input with a maximum gain flatness of ±2.5 dB. This SMA RF power amplifier delivers 30.5 dBm at P1dB compression point. Our coax DC powered modules with integrated heatsink amplifier offers a typical output IP3 of 42 dBm. This 37 dB power amplifier with heatsink operates over the temperature range of -40 deg C and 65 deg C. Additional dimensions, specifications, and CAD drawings for this DC powered modules with integrated heatsink RF amplifier can be found on its downloadable PDF datasheet. Our radio frequency amplifier PE15A3022F is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coax power amplifier can ship worldwide the same day of the purchase, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect power amplifier with heatsink for your requirements.

1 : $10,300.0
5 : $9,888.0
10 : $9,476.0
25 : $9,064.0

PE15A63028

Pasternack Enterprises

Key Specifications, Power Output: 19 dBm Psat, Frequency, Min: 100 MHz, Frequency, Max: 18 GHz, Gain, Min: 38 dB, Gain, Typical: 42 dB, Noise Figure, Max: 4 dB, 3rd Intercept Point: 27 dB, RF Input VSWR Max: 2:1, RF Output VSWR Max: 2:1, Connector Series: SMA. 42 dB Gain, 16 dBm P1dB, 0.1 GHz to 18 GHz, Broadband AC Low Noise Amplifier, Bench-Top, 110/220VAC, 2.2 dB Noise Figure, SMA. The PE15A63028 low noise broadband amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise broadband amplifier uses SMA connectors at 50 Ohm. This AC powered low noise broadband amplifier has a SMA gender configuration for input and output ports. This SMA broadband amplifier has a minimum frequency of 100 MHz and maximum frequency of 18 GHz. The PE15A63028 broadband amplifier has 1.5:1 of typical VSWR (Voltage Standing Wave Ratio). The significantly low noise figure of this radio frequency amplifier is 4 dB with a typical gain of 42 dB. This SMA AC powered low noise broadband amplifier is ideal for test & measurement, 5G communication, wireless infrastructure, military & commercial communications, military electronic systems, research & development, microwave radio, vsat and fiber optics applications. Our broadband AC powered low noise amplifier is designed to operate on a 110/220 VAC voltage. This RF low noise amplifier has a 1.25 dB typical gain flatness along with 38 dB of minimum gain. Additional specs for this in-series low noise broadband amplifier can be found on its PDF specification datasheet and CAD drawings above. The PE15A63028 broadband amplifier operates over the temperature range of -40 deg C and 85 deg C. Our radio frequency in-series AC powered broadband amplifier from Pasternack has an aluminum body with GaAS semiconductor technology for high efficiency. This coax connectorized low noise broadband amplifier has 16 dB of typical 1dB compression point and 2.2 dBm of typical RF input power. The AC powered broadband amplifier is rated for 19 dBm of typical saturated output power along with typical reverse isolation of -70 dB. Our AC powered broadband radio frequency amplifier is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial low noise broadband amplifier can ship worldwide the same day of the purchase as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect broadband AC powered low noise amplifier for your requirement.

1 : $11,600.0
5 : $11,136.0
10 : $10,672.0
25 : $10,208.0

PE15A3005

Pasternack Enterprises

Key Specifications, Power Output: 25 dBm P1dB, Frequency, Min: 500 MHz, Frequency, Max: 10 GHz, Gain, Min: 28 dB, Gain, Typical: 32 dB, Gain Flatness: 1 dB, Noise Figure, Max: 5 dB, 3rd Intercept Point: 33 dB, RF Input VSWR Max: 2:1, RF Output VSWR Max: 2:1, Connector Series: SMA. 25 dBm P1dB, 500 MHz to 10 GHz, Medium Power Broadband Amplifier, 32 dB Gain, 33 dBm IP3, 3 dB NF, SMA. PE15A3005 medium power broadband amplifier from Pasternack is featured in our extensive in-stock RF amplifier selection. Our connectorized medium power broadband amplifier uses SMA connectors at 50 Ohm. This SMA broadband amplifier has wide-band capability with a minimum frequency of 500 MHz and maximum frequency of 10 GHz. The minimum gain of this broad-band radio frequency amplifier is 28 dB with a typical gain of 32 dB. Pasternack broadband amplifier PE15A3005 is rated at 25 dBm P1dB, 2:1 input VSWR maximum and 2:1 output VSWR max. Our broad band radio frequency amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial broadband amplifier can ship worldwide the same day of the purchase as with our other available RF parts.

1 : $2,800.0
5 : $2,688.0
10 : $2,576.0

PE15A63019

Pasternack Enterprises

1 : $1,440.0
5 : $1,382.4
10 : $1,324.8
25 : $1,267.2

PE15A5048F

Pasternack Enterprises

Key Specifications, Frequency, Min: 6 GHz, Frequency, Max: 18 GHz, Gain, Min: 35 dB, 1dB Compression Point, Min: 33 dBm, 3rd Intercept Point, Typ: 40 dB, Voltage, DC Typ: 12 Volts. 2 Watt P1dB, 6 GHz to 18 GHz, Medium Power Amplifier with Heatsink, SMA, 35 dB Gain, 40 dBm IP3. RF solid state power amplifier (SSPA) PE15A5048F from Pasternack is part of the largest selection of in-stock radio frequency microwave and millimeter wave amplifiers available for same-day shipment. This Pasternack solid state RF power amplifier is a medium power amp design constructed in a connectorized package. Our SSPA is designed with SMA connectors and rated at 2 Watts. Pasternack solid state power amplifier part number PE15A5048F SMA medium power amp has a 35 dB minimum gain. The medium power medium gain amp is rated with a P1dB of 33 dBm. Our radio frequency medium power solid state amplifier is constructed for minimum frequency of 6 GHz and a maximum frequency of 18 GHz. Additional radio frequency specs on this high frequency medium gain medium power solid state power amplifier from Pasternack can be found in the details on the RF power amplifier datasheet specifications PDF above. Our medium power medium gain HF amplifier is part of over one 40,000 RF, microwave and millimeter wave components in-stock. This medium power 2 Watt radio frequency amplifier is ready for same day purchase and shipping worldwide. Pasternack also stocks a wide range of other radio signal SSPAs that ship same-day from our facility for all your RF, microwave and millimeter wave amplifier component needs.

1 : $13,700.0
5 : $13,152.0
10 : $12,604.0
25 : $12,056.0

PE-W15A001

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-15, Direction Type: Omni Directional, Polarization: Vertical, Frequency, Min: 58 GHz, Frequency, Max: 63 GHz, Beam Width, 3dB V: 35, Beam Width, 3dB H: 360. WR-15 Waveguide Horn Antenna Operating From 58 GHz to 63 GHz With a Nominal 0 dBi Gain With UG-387/U Round Cover Flange. PE-W15A001 WR-15 waveguide horn antenna is also known as a WR-15 horn antenna. Our WR15 horn antenna has a minimum frequency of 58 GHz and a maximum frequency of 63 GHz. WR15 horn antenna PE-W15A001 has a vertical beam width of 35 and horizontal of 360 degrees at 3 dB. This WR-15 waveguide horn antenna is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our WR-15 horn antenna can ship worldwide the same day as it is purchased as with our other available RF parts.

1 : $4,390.0
5 : $4,302.2
10 : $4,214.4

Relay Specialties

FCD-15A

OptiFuse

Ceramic Fuse; 15 A; Fast; 5x20 IEC 60127; 250 VAC/DC; cURus

1 : $1.58
10 : $1.4
25 : $1.26
50 : $1.15
100 : $1.1

13,328

FCD-3.15A

OptiFuse

Ceramic Fuse; 3.15 A; Fast 5x20mm; IEC 60127; 250 VAC/DC cURus

1 : $1.38
10 : $1.22
25 : $1.1
50 : $1.0
100 : $0.96

5,677

MSC-3.15A

OptiFuse

Glass Fuse; 3.15 A; Med Lag 5x20mm; UL 248-14; 250 VAC cULus/cURus

1 : $1.35
10 : $1.2
25 : $1.08
50 : $0.98
100 : $0.94

5,433

FSE-P-15A

OptiFuse

Glass Fuse; 15 A; Fast-Acting 5x15mm; Pigtail; UL 248-14 300 VAC; cURus

1 : $1.69
10 : $1.5
25 : $1.35
50 : $1.23
100 : $1.17

3,975

FSE-3.15A

OptiFuse

Glass Fuse; 3.15 A; Fast; 5x15 UL 248-14; 300 VAC; cURus

1 : $1.03
10 : $0.91
25 : $0.82
50 : $0.75
100 : $0.71

3,600

FSH-15A

OptiFuse

Glass Fuse; 15 A; Fast-Acting 1AG; UL 248-14 125 VAC; 32 VAC; cURus

1 : $0.86
10 : $0.76
25 : $0.69
50 : $0.62
100 : $0.6

2,431

FCA-15A

OptiFuse

Ceramic Fuse; 15 A; Fast 6.3x32mm; UL 248-14 300 VAC; 125 VDC; cULus

1 : $1.32
10 : $1.17
25 : $1.06
50 : $0.96
100 : $0.92

2,179

FSD-15A

OptiFuse

Glass Fuse; 15 A; Fast-Acting 5x20mm; IEC 60127; 250 VAC cURus

1 : $1.01
10 : $0.89
25 : $0.81
50 : $0.73
100 : $0.7

1,808

ACBP-N-15A

OptiFuse

Automotive Circuit Breaker 15 A; 12/24/32 VDC Type I - Auto Reset

1 : $6.97
10 : $6.19
25 : $5.57
50 : $5.07
100 : $4.85

1,390

MOCBP4-PM-15A

OptiFuse

Automotive Circuit Breaker 15 A; 14 VDC Type II - Modified Reset

1 : $11.46
10 : $10.19
25 : $9.17
50 : $8.34
100 : $7.97

1,212

MSC-15A

OptiFuse

Glass Fuse; 15 A; Med Lag 5x20mm; UL 248-14; 250 VAC

1 : $2.02
10 : $1.79
25 : $1.61
50 : $1.47
100 : $1.4

685

ANM-W-15A-18R

OptiFuse

Automotive Fuse; 15 A; 32 VDC Mini Blade; Blue 32 V; 16/18 AWG Red Wire

1 : $4.69
10 : $4.17
25 : $3.75
50 : $3.41
100 : $3.26

401

ANM58-15A

OptiFuse

Automotive Fuse; 15 A; 58 VDC Mini Blade; Blue Blue; 58 V; Blade, Mini

1 : $2.06
10 : $1.83
25 : $1.65
50 : $1.5
100 : $1.43

292

MRCBP-24-H-15A

OptiFuse

Automotive Circuit Breaker 15 A; 24 VDC Type III - Manual Reset

1 : $7.38
10 : $6.56
25 : $5.91
50 : $5.37
100 : $5.14

PRI-51/5A

ELKO EP HOLDING SE

Current Monitor Relay AC 0.5-5 A 1C SPDT; DIN Rail

1 : $53.25
3 : $51.08
5 : $49.28
10 : $47.93
25 : $45.44

TE Connectivity

3615A100K

TE Connectivity

3615A-10-3525-10 10UH Inductance: 10 µH Current Rating (Max): 620 mA DC Resistance: .6 Ω Inductor Quality Factor: 35 Passive Component Tolerance: 10 % Molded Smd Inductor | 10 µH 620 mA .6 Ω 35 | Part Number: 3615A100K | Internal Number: 1624097-1 | TE Connectivity
RoHS : Compliant

1,000 : $16.37
500 : $16.87
250 : $17.36
100 : $17.86
50 : $18.36
25 : $18.85
10 : $19.35
1 : $19.84

179

4525DO-SS3AS015AP

TE Connectivity

PRESS XDCR,DIGITAL,PSI RANGE Pressure Sensor Type: Digital Pressure and Altimeter Sensor Modules Pressure Type: Absolute Proof Pressure Range: 15 psi Pressure: 15 psi Pressure: 1.034 bar Digital Pressure and Altimeter Sensor Modules Absolute 15 psi | PCB Mounted Digital Pressure Sensor | Part Number: 4525DO-SS3AS015AP | Internal Number: 4525DO-SS3AS015AP | TE Connectivity
RoHS : Compliant

1 : $119.36

103

85-015A-8R

TE Connectivity

15 PSIA 1/8 - 27 NPT PRESSURE SENSOR Pressure: 15 psi Pressure Sensor Type: mV Output Pressure Sensors Pressure Type: Absolute Output Signal Details: 100mV Operating Temperature Range: -40 – 125 °C 13Mm Mv Output Pressure Sensor | 15 psi mV Output Pressure Sensors | Part Number: 85-015A-8R | Internal Number: 85-015A-8R | TE Connectivity
RoHS : Compliant

1 : $121.45

TXR15AB00-1008AI

TE Connectivity

TXR15AB00-1008AI Connector Backshell Product Style: Ruggedized Connector Backshell Product Type: Backshell Cable Entry Diameter: .01 – .5 in Cable Entry Diameter: .2 – 12.7 mm Primary Product Material: Aluminum Ruggedized Backshell .01 – .5" .2 – 12.7 mm | Connector Backshell | Part Number: TXR15AB00-1008AI | Internal Number: 483859-000 | Alias Number: 2-1193621-4 | Aluminum | TE Connectivity
RoHS : Compliant

1 : $188.57