 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
18RK-166-R/B Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 Avnet Americas | CR1206-FX-18R2ELF | Bourns Inc | - Tape and Reel (Alt: CR1206-FX-18R2ELF) RoHS : Compliant |
| 1,420,000 | |
| CRCW060318R0FKEA | Vishay Intertechnologies | SMD Chip Resistor, 18 ohm, ? 1%, 125 mW, 0603 [1608 Metric], Thick Film, General Purpose - Tape and Reel (Alt: CRCW060318R0FKEA) RoHS : Compliant |
| 80,000 | ||
| CR0402-FX-18R2GLF | Bourns Inc | - Tape and Reel (Alt: CR0402-FX-18R2GLF) RoHS : Compliant |
| 20,000 | ||
| CRCW060318R7FKEA | Vishay Intertechnologies | - Tape and Reel (Alt: CRCW060318R7FKEA) RoHS : Compliant |
| 20,000 | ||
STM1818RWX7F | STMicroelectronics | - Tape and Reel (Alt: STM1818RWX7F) RoHS : Compliant |
| 6,000 | ||
| CRCW060318R2FKEA | Vishay Intertechnologies | SMD Chip Resistor, 18.2 ohm, ? 1%, 125 mW, 0603 [1608 Metric], Thick Film, General Purpose - Tape and Reel (Alt: CRCW060318R2FKEA) RoHS : Compliant |
| 5,000 | ||
| CRCW120618R0JNEA | Vishay Intertechnologies | - Tape and Reel (Alt: CRCW120618R0JNEA) RoHS : Compliant |
| 5,000 | ||
| CRCW120618R2FKEA | Vishay Intertechnologies | SMD Chip Resistor, 18.2 ohm, ? 1%, 250 mW, 1206 [3216 Metric], Thick Film, General Purpose - Tape and Reel (Alt: CRCW120618R2FKEA) RoHS : Compliant |
| 5,000 | ||
| NRC12F18R0TRF | NIC Components Corp | SMD Chip Resistor, 18 ohm, ? 1%, 250 mW, 1206 [3215 Metric], Thick Film, General Purpose, NRC Series - Tape and Reel (Alt: NRC12F18R0TRF) RoHS : Compliant |
| 5,000 | ||
| RLR20C18R2FRRE6 | Vishay Intertechnologies | - Tape and Reel (Alt: RLR20C18R2FRRE6) RoHS : Not Compliant |
| 1,000 | ||
| RH05018R00FE02 | Vishay Intertechnologies | - Bulk (Alt: RH05018R00FE02) RoHS : Compliant |
| 52 | ||
| XTM-18R0626-R | Eaton Corporation | Supercapacitor, 61.7 F, 18 V, Screw, -5%, +20%, 21.5 mm, 1500 hours @ 65?C, Chassis Mount, 0.022 ohm - Bulk (Alt: XTM-18R0626-R) RoHS : Compliant |
| 10 | ||
| 667-202NF9H3-18R | Glenair Inc | - Bulk (Alt: 667-202NF9H3-18R) RoHS : Not Compliant |
| 7 | ||
| MS27511B18R | Glenair Inc | - Bulk (Alt: MS27511B18R) RoHS : Not Compliant |
| 5 | ||
| GRPM2L-9P-6J7-18R4C | Glenair Inc | - Bulk (Alt: GRPM2L-9P-6J7-18R4C) RoHS : Not Compliant | 1 | |||
 Newark | RK73H2ATTD18R2F | KOA Speer Electronics Inc | Res, 18R2, 1%, 0.25W, 0805; |Koa RK73H2ATTD18R2F RoHS : Compliant |
| 27,510 | |
| RK73H2ATTD18R2F | KOA Speer Electronics Inc | Res, 18R2, 1%, 0.25W, 0805; |Koa RK73H2ATTD18R2F RoHS : Compliant |
| 27,510 | ||
| RK73H1ETTP18R0F | KOA Speer Electronics Inc | Res, 18R, 1%, 0.1W, 0402; |Koa RK73H1ETTP18R0F RoHS : Compliant |
| 12,740 | ||
| RK73H1ETTP18R0F | KOA Speer Electronics Inc | Res, 18R, 1%, 0.1W, 0402; |Koa RK73H1ETTP18R0F RoHS : Compliant |
| 12,740 | ||
| CRCW040218R0FKED | Vishay Intertechnologies | Surface Mount Thick Film Resistor, Aec-Q; |Vishay CRCW040218R0FKED RoHS : Compliant |
| 10,000 | ||
| CRCW040218R0FKED | Vishay Intertechnologies | Surface Mount Thick Film Resistor, Aec-Q; |Vishay CRCW040218R0FKED RoHS : Compliant |
| 8,945 | ||
| CRCW040218R0FKED | Vishay Intertechnologies | Surface Mount Thick Film Resistor, Aec-Q; |Vishay CRCW040218R0FKED RoHS : Compliant |
| 8,945 | ||
| CRCW060318R2FKEA | Vishay Intertechnologies | Surface Mount Thick Film Resistor, Aec-Q; |Vishay CRCW060318R2FKEA RoHS : Compliant |
| 5,030 | ||
| CRCW060318R2FKEA | Vishay Intertechnologies | Surface Mount Thick Film Resistor, Aec-Q; |Vishay CRCW060318R2FKEA RoHS : Compliant |
| 5,030 | ||
| MTSW-103-09-G-S-118-RA | Samtec Inc | Pin Header, Mtsw-103-09-G-S-118-Ra; |Samtec, Inc. MTSW-103-09-G-S-118-RA RoHS : Compliant |
| 1,388 | ||
| ABT-418-RC | SPC Multicomp | Transducer Buzzer, 8V, 2.4Khz, Smd; |Multicomp Pro ABT-418-RC RoHS : Compliant |
| 743 | ||
| FCR684218R | Cliff Electronic Components | Fo Receiver, Jack, 16Mbps, 660Nm, 20M; |Cliff Electronic Components FCR684218R RoHS : Compliant |
| 37 | ||
| 1SVR405618R7100 | ABB Low Voltage Products and Systems | Power Relay, 4Pdt, 6A, 250V, Socket; |Abb 1SVR405618R7100 (Alternate Part Number: 4013614373718 RoHS : Compliant |
| 36 | ||
| 1418R8LP | Hammond Manufacturing | Nema 4-12 Encl 48X30X8; |Hammond 1418R8LP RoHS : Not Compliant |
| 3 | ||
| NB18-RP10FSX | L-com Inc | Plate, Mnting; |L-Com NB18-RP10FSX RoHS : Compliant |
| 3 | ||
 Analog Devices Inc | ADP221ACDZ-1818-R7 | Analog Devices Inc | 1.8Vo1 1.8Vo2 200mA LDO RoHS : Compliant |
| 24,000 | |
| ADP7142WAUJZ-1.8-R7 | Analog Devices Inc | 40V 200mA LDO 1.8Vo RoHS : Compliant |
| 19,086 | ||
ADP121-ACBZ18R7 | Analog Devices Inc | 150mA Low IQ Low Dropout Reg 1 RoHS : Compliant |
| 18,491 | ||
ADP1710AUJZ-1.8-R7 | Analog Devices Inc | 150mA Low Dropout linear regul RoHS : Compliant |
| 18,053 | ||
| ADP160AUJZ-1.8-R7 | Analog Devices Inc | 150mA LDO 1.8Vout w/ QOD RoHS : Compliant |
| 16,395 | ||
| ADP7142ACPZN1.8-R7 | Analog Devices Inc | 40V 200mA LDO 1.8Vo RoHS : Compliant |
| 13,184 | ||
ADP2138ACBZ-1.8-R7 | Analog Devices Inc | 0.8A 3MHz Buck 1.8Vout RoHS : Compliant |
| 10,126 | ||
ADP1707ARDZ-1.8-R7 | Analog Devices Inc | 1A Low Dropout Linear regulato RoHS : Compliant |
| 8,000 | ||
| ADM7154ARDZ-1.8-R7 | Analog Devices Inc | 600mA Ultra-Low-Noise High-PSR RoHS : Compliant |
| 4,289 | ||
ADP3338AKCZ-1.8-RL | Analog Devices Inc | 1A anyCAP LDO RoHS : Compliant |
| 2,933 | ||
| ADPL42002ARDZ-1.8-R7 | Analog Devices Inc | 20V 200mA LDO 1.8Vo RoHS : Compliant |
| 2,185 | ||
| ADP2166ACPZ-1.8-R7 | Analog Devices Inc | 6V/6A High Eff, Step-Down DC-t RoHS : Compliant |
| 1,500 | ||
| ADPL42005ARDZ-1.8-R7 | Analog Devices Inc | 500mA HV LDO 1.8V RoHS : Compliant |
| 1,196 | ||
| ADM7171ACPZ-1.8-R7 | Analog Devices Inc | A Hi PSRR FT LDO 1.8Vo RoHS : Compliant |
| 298 | ||
| ADP1712AUJZ-1.8-R7 | Analog Devices Inc | 300mA CMOS Low-Dropput Regulat RoHS : Compliant |
| 59 | ||
 RS | T18R0M4 | HellermannTyton | CABLE TIE, 4" LONG, UL RATED, 18LB TENSILE STRENGTH, PA66, BLACK |
| 110,830 | |
| 18RA-6F (70091862) | STA-KON | FORK TERMINAL, VINYL, HOLE #6, LENGTH .94", WIDTH .25", INSULATION .150, RED |
| 2,105 | ||
| BK/AGC-1/8-R | Eaton Electronics | FUSE CYLINDER FAST ACTING 0.125A SZ 3AG DIMS 0.25X1.25" GLASS CARTRIDGE 250VAC |
| 86 | ||
| B618RR | Thomas & Betts | ROUND OLD WORK BOX, VOLUME 18 CUBIC INCHES, DIAMETER 4-1/4", BLUE, SWING CLAMPS |
| 66 | ||
| ABC-18-R | Eaton Electronics | FUSE, FAST-ACTING, 18A, ABC SERIES |
| 59 | ||
| S18RW3D (29822) | Banner Engineering Corp | PHOTOELECTRIC SENSOR, DIFFUSE, 100MM, 20-250VAC, SSAC, CABLE, S18 |
| 24 | ||
| AGC-1/8-R (AGC-1-8-R) | Eaton Electronics | BUSS SMALL DIMENSION FUSE |
| 18 | ||
| 60318R (H223291) | Mersen Electrical Power | FUSE BLOCK, CLASS R SPRING REINFORCED,3 POLE,600V,30A, BOX CONNECTOR |
| 3 | ||
| A18R188 | nVent Hoffman | ENCLOSURE 18.00X18.00X8.00 , 18.00X18.00X8.00, STEEL |
| 2 | ||
| MR 18 RSS | Regal Rexnord Corporation | NEEDLE BEARING, MR SERIES 500 |
| 2 | ||
| 1SVR405618R3000 | ABB Low Voltage Products and Systems | CR-M230AC4G PLUGGABLE INTERFACE REL |
| 2 | ||
| BI5-M18-RN6X-H1143 (4614603) | TURCK Inc | PROXIMITY SENSOR, 5MM SENSING DISTANCE, NPN, NC, FLUSH MOUNT |
| 2 | ||
| ANM-W-20A-18R | OptiFuse | AUTOMOTIVE FUSE TAP, MINI BLADE, 18 AWG, 32V, 20A |
| 1 | ||
| SMBQS18RA (73812) | Banner Engineering Corp | SMBQS18RA MOUNTING BRACKET |
| 1 | ||
| BI5-G18-RZ3X-B1331 60MM (4373199) | TURCK Inc | PROXIMITY SENSOR, 5MM SENSING DISTANCE, AC/DC, NC, FLUSH MOUNT |
| 1 | ||
 Microchip Technology Inc | HV2918/R4X | Microchip Technology Inc | 17 2:1 multiplexer/demultiplexer, HV analog switches without HV supplies, QFN, Projected EOL: 2046-06-19 RoHS : Compliant |
| 224 | |
| EV18R03A | Microchip Technology Inc | IEEE802.3at/bt Type 2 PD EVB PD70201, w/isolated low-profile flyback 24V 1.05A, Projected EOL: |
| 19 | ||
| 1N6818R | Microchip Technology Inc | Power Schottky _ Thinkey4, Projected EOL: 2049-02-05 - Contact for Pricing RoHS : Compliant | 0 | |||
| 1N3318RB | Microchip Technology Inc | Voltage Regulator _ DO-5, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| 1N2818RB | Microchip Technology Inc | Voltage Regulator _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| 1N3318RA | Microchip Technology Inc | Voltage Regulator _ DO-5, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| HV2818/R4X | Microchip Technology Inc | 16 2:1 multiplexer/demultiplexer, HV analog switches without HV supplies, QFN, Projected EOL: 2046-06-19 RoHS : Compliant |
| 0 | ||
| JAN1N2818RB | Microchip Technology Inc | Voltage Regulator _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| JAN1N3318RB | Microchip Technology Inc | Voltage Regulator _ DO-5, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| JANTX1N3318RB | Microchip Technology Inc | Voltage Regulator _ DO-5, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| JANTX1N2818RB | Microchip Technology Inc | Voltage Regulator _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| JANTXV1N2818RB | Microchip Technology Inc | Voltage Regulator _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| JANTXV1N3318RB | Microchip Technology Inc | Voltage Regulator _ DO-5, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
 Rochester Electronics | NCV1117DT18RKG | onsemi | IC VOLT REG Fixed 1 REG 1.8V 1A TO-252-3 T/R RoHS : Compliant |
| 27,500 | |
ADM1818-R22AKS-RL7 | Analog Devices Inc | Voltage Supervisor/Reset IC, Fixed, 1 Channel, +2.18V, PDSO3 RoHS : Not Compliant |
| 23,559 | ||
| ADP1712AUJZ-1.8-R7 | Analog Devices Inc | Fixed Positive LDO Regulator, 1.8V, 0.27V Dropout, CMOS, PDSO5 RoHS : Compliant |
| 2,165 | ||
| ADP7142ACPZN1.8-R7 | Analog Devices Inc | IC SPST 1:1 4 3.3V, ±3.3V - 16V, ±8V 24-QFN Tray RoHS : Compliant |
| 14,616 | ||
| ADM7171ACPZ-1.8-R7 | Analog Devices Inc | IC VOLT REG Fixed 1 REG 1.8V 1A 8-SON T/R RoHS : Compliant |
| 30 | ||
| ADP121-ACBZ18R7 | Analog Devices Inc | IC VOLT REG Fixed 1 REG 1.8V 150mA 4-BGA T/R RoHS : Compliant |
| 119,644 | ||
| ADP1714AUJZ-1.8-R7 | Analog Devices Inc | Fixed Positive LDO Regulator, 1.8V, 0.27V Dropout, CMOS, PDSO5 RoHS : Compliant |
| 41,012 | ||
| ADP1707ARDZ-1.8-R7 | Analog Devices Inc | IC VOLT REG Adjustable Step-Up, Step-Up/Step-Down Boost, SEPIC 1 OUT 2.5V - 20V 150mA 8-SOP T/R RoHS : Compliant |
| 29,207 | ||
| ADP221ACDZ-1818-R7 | Analog Devices Inc | Fixed Positive LDO Regulator, 2 Output, 1.8V1, 1.8V2, PBGA6 RoHS : Compliant |
| 1,150 | ||
| ADP1710AUJZ-1.8-R7 | Analog Devices Inc | IC VOLT REG Fixed 1 REG 1.8V 150mA SOT-23-5 T/R RoHS : Compliant |
| 54,723 | ||
BQ24618RGET | Texas Instruments | Battery Charger IC Lithium Ion/Polymer 2.1V 24-QFN T/R RoHS : Compliant |
| 6 | ||
| PMB6618RV2.1 | Lantiq | Low-IF Transceicer For 2.4-GHz WDCT |
| 9,384 | ||
| LDK120C18R | STMicroelectronics | IC VOLT REG Fixed 1 REG 1.8V 200mA SOT-353 T/R RoHS : Compliant |
| 47,282 | ||
| LDL112PU18R | STMicroelectronics | IC VOLT REG Fixed 1 REG 1.8V 1.2A 6-SON T/R RoHS : Compliant |
| 0 | ||
| STM1818RWX7F | STMicroelectronics | Supervisory Circuit 2.55V SOT-23-3 T/R RoHS : Compliant |
| 5,295 | ||
 Sager | MTSW-103-09-G-S-118-RA | Samtec Inc | Headers & Wire Housings Variable Height PCB Header Strips, 0.100 pitch RoHS : Compliant |
| 1,388 | |
| HMTSW-208-23-G-S-118-RA | Samtec Inc | Headers & Wire Housings .100 High-Temp Variable Post Height Terminal Strip RoHS : Compliant |
| 133 | ||
| 3-3766F0-2018-R10000 | OMRON Electronic Components | Programmable Logic Controllers - PLCs | 0 | |||
| IT18R0C2 | HellermannTyton | IDENTIFICATION TIE, 3.9 LONG, 18LB TENSILE STRENGTH, PA66, BLACK, 100/PKG |
| 0 | ||
| JCH-18R | Eaton Bussmann | Specialty Fuses 2540V 390A RoHS : Unknown | 0 | |||
| 1SNA232118R2600 | TE Connectivity | DIN Rail Terminal Blocks RoHS : Compliant | 0 | |||
| VFD69383W2NNN-518R | TE Connectivity | Antennas VHCLR MIMO 698-960-3800MHZ RoHS : Compliant | 0 | |||
| CCI0402AR18R-1G | Qnity Laird | Common Mode Chokes / Filters | 0 | |||
| TFR0402BFC18R2KR | Littelfuse Inc | TFR 0402 10PPM 0.1W 18.2 OHM�0.1% |
| 0 | ||
| TFR0603BHC18R2NR | Littelfuse Inc | TFR 0603 25PPM 0.1W 18.2 OHM�0.1% |
| 0 | ||
| UTP28SP18RD-Q | Panduit Corp | Ethernet Cables / Networking Cables Copper Patch Cord, Category 6 Performanc RoHS : Compliant | 0 | |||
| UTP6A18RD | Panduit Corp | Ethernet Cables / Networking Cables Copper Patch Cord, Cat 6A, Red UTP Cable RoHS : Compliant | 0 | |||
| B618RP-UPC | ABB Group | Electrical Enclosures | 0 | |||
| BK/MDL-V-1/8-R | Eaton Bussmann | Cartridge Fuses 250VAC 1/8A Axial Lead |
| 0 | ||
| MTSW-115-09-G-S-118-RE | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
 TME | 1SNA113118R1700 | TE Connectivity | Splice terminal: rail; SNA; Body: grey |
| 2,010 | |
| 1SNA171018R2000 | TE Connectivity | 1SNA171018R2000 |
| 274 | ||
| AC PLUG TR18RDM TRE15R TR25R EUROPE | Cincon Electronics Corporation | Adapter |
| 54 | ||
| 1SVR405618R3000 | ABB Low Voltage Products and Systems | Relay: electromagnetic; Ucoil: 230VAC; 4PDT; Icontacts max: 6A |
| 14 | ||
| 1SVR405618R1011 | ABB Low Voltage Products and Systems | Relay: interface; Ucoil: 24VDC; 4PDT; for DIN rail mounting; CR-M |
| 13 | ||
| 1SVR405618R7100 | ABB Low Voltage Products and Systems | Relay: electromagnetic; Ucoil: 110VAC; 4PDT; Icontacts max: 6A |
| 12 | ||
| 1SVR405618R4100 | ABB Low Voltage Products and Systems | Relay: electromagnetic; Ucoil: 12VDC; 4PDT; Icontacts max: 6A; CR-M |
| 9 | ||
| 1SVR405618R0000 | ABB Low Voltage Products and Systems | Relay: electromagnetic; Ucoil: 24VAC; 4PDT; Icontacts max: 6A; CR-M |
| 5 | ||
| 2618 RD005 | Alpha Wire | Wire; ThermoThin; stranded; Cu; 18AWG; PFA; red; 600V; 30.5m; 1x18AWG |
| 2 | ||
| 1418RFW 24-48V AC/DC | LOCKPOL Sp zoo | Electromagnetic lock; 24÷48VDC; low current; 1400RFW; 24÷48VAC |
| 0 | ||
| 031-318-RFX | Amphenol RF | Connector: BNC; socket; female; coaxial; straight; 50Ω; crimped |
| 0 | ||
| 1818RFT 12-24V AC/DC | LOCKPOL Sp zoo | Electromagnetic lock; 12÷24VDC; with a slip-on; 1800RFT |
| 0 | ||
| 1SMB2EZ18_R1_00001 | PanJit Semiconductor | Diode: Zener; 2W; 18V; SMD; SMB; single diode; reel,tape RoHS : Compliant |
| 0 | ||
| 1SMB3EZ18_R1_00001 | PanJit Semiconductor | Diode: Zener; 3W; 18V; SMD; SMB; single diode; reel,tape RoHS : Compliant |
| 0 | ||
| 2CDS200918R0001 | ABB Low Voltage Products and Systems | Neutral terminal |
| 0 | ||
 Ameya Holding Limited | RC0805FR-0718RL | YAGEO Corporation | RC Series 0805 0.125 W 18 Ohms 1% ±100 ppm/°C SMT Thick Film Chip Resistor RoHS : Compliant | 50,000 | ||
| LTR18EZPF18R0 | ROHM Semiconductor | High Power Chip Resistors <Wide Terminal Type> RoHS : Compliant |
| 15,000 | ||
| ESR10EZPF18R0 | ROHM Semiconductor | Anti-surge Chip Resistors RoHS : Compliant |
| 15,000 | ||
| ESR18EZPF18R0 | ROHM Semiconductor | Anti-surge Chip Resistors RoHS : Compliant |
| 15,000 | ||
TPS6209718RWKR | Texas Instruments | RoHS : Compliant | 13,725 | |||
| KTR10EZPF18R7 | ROHM Semiconductor | High Voltage Resistance Chip Resistors RoHS : Compliant |
| 10,000 | ||
| ESR01MZPF18R0 | ROHM Semiconductor | Anti-surge Chip Resistors RoHS : Compliant |
| 10,000 | ||
| LTR50UZPF18R0 | ROHM Semiconductor | High Power Chip Resistors <Wide Terminal Type> RoHS : Compliant |
| 5,000 | ||
| MCR100SJQPF18R0 | ROHM Semiconductor | RoHS : Compliant |
| 4,000 | ||
| ESR25JZPF18R0 | ROHM Semiconductor | 抗浪涌贴片电阻器 RoHS : Compliant |
| 4,000 | ||
| MCR25SJQPF18R0 | ROHM Semiconductor | 3225(1210)尺寸，厚膜大功率贴片电阻器 (AEC-Q200 合格) RoHS : Compliant |
| 4,000 | ||
| ADP1710AUJZ-1.8-R7 | Analog Devices Inc | ADP1710AUJZ-1.8-R7 , LDO 电压调节器, 150mA, 1.8 V输出 ±2%, 2.5 → 5.5 V输入, 5针 TSOT封装 RoHS : Compliant | 2,890 | |||
| ST1S15J18R | STMicroelectronics | ST1S15 Series 5.5 V 500 mA 6 MHz Synchronous Step-Down Converter - FLIPCHIP-6 RoHS : Compliant | 1,472 | |||
| RB218RSM15STL1 | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
TS3A5018RSVR | Texas Instruments | Hong Kong RoHS : Compliant | 50 | |||
 ComSIT USA | RNF10018RDSP | TE Connectivity | AVAILABLE EU | 4,415 | ||
| FIT221V18RED | ALPHA WIRE | AVAILABLE EU | 164 | |||
| MR08X18R0FTLV | Walsin Technology Corporation | AVAILABLE EU | 3,750 | |||
| RC0402JR0718RL | YAGEO Corporation | AVAILABLE EU | 6,499 | |||
| RMCF1206JT18R0 | STACKPOLE ELECTRONICS INC (SEI) | AVAILABLE EU | 375 | |||
| MR12X18R0FTL | Walsin Technology Corporation | AVAILABLE EU RoHS : Compliant | 271,560 | |||
| DS1818R20TR | Analog Devices Inc | AVAILABLE EU | 1,944 | |||
| T60023418R | VENTURE CORPORATION LTD | AVAILABLE EU | 203 | |||
| ERJ3EKF18R2V | Panasonic Electronic Components | AVAILABLE EU RoHS : Compliant | 6,260 | |||
ComSIT USA | BLM18RK102SN1D | Murata Manufacturing Co Ltd | Ferrite Chip, 1 Function(s), 0.2A, 2 Pin(s) RoHS : Not Compliant | 192,000 | ||
| CRCW120618R0FKECHP | Vishay Intertechnologies | Fixed Resistor, Metal Glaze/thick Film, 0.75W, 18ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1206 RoHS : Compliant | 40,000 | |||
| BLM18RK121SN1D | Murata Manufacturing Co Ltd | CHIP FERRITE BEAD Ferrite Chip, 1 Function(s), 0.2A, 2 Pin(s) RoHS : Compliant | 12,000 | |||
| BZX55C18RO | TSC Electronics Ltd | 500 MILLI WATT HERMETICALLY SEALED GLASS ZENER VOLTAGE REGULATOR Zener Diode, 18V V(Z), 6.41%, 0.5W, Silicon, Unidirectional, DO-35 RoHS : Compliant | 10,000 | |||
| BZX55C18R0 | TSC Electronics Ltd | 500MILLI WATT ZENER DIODE Zener Diode RoHS : Compliant | 9,460 | |||
| STLQ020J18R | STMicroelectronics | Fixed Positive LDO Regulator, 1.8V, PBGA4 RoHS : Not Compliant | 9,000 | |||
| RC1218FK0718RL | yag | GENERAL PURPOSE CHIP RESISTOR Fixed Resistor, Metal Glaze/thick Film, 1W, 18ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1218 RoHS : Compliant | 8,000 | |||
| LDK120C18R | STMicroelectronics | 200 MILLI AMP LOW QUIESCENT CURRENT VERY LOW NOISE LDO Fixed Positive LDO Regulator, 1.8V, CMOS, PDSO5 RoHS : Compliant | 6,000 | |||
| SM204FTK5018R0TR3 | Firstohm | Resistor, 18?, 1%, 0.25W, Fusible, Flameproof, Axial RoHS : Compliant | 6,000 | |||
| LD39030SJ18R | STMicroelectronics | 300 MILLI AMP LOW QUIESCENT CURRENT SOFT-START, LOW NOISE VOLTAGE REGULATOR Fixed Positive LDO Regulator, 1V, PBGA4 RoHS : Compliant | 5,000 | |||
| LD39115J18R | STMicroelectronics | 150 MILLIAMP LOW QUIESCENT CURRENT LOW NOISE VOLTAGE REGULATOR Fixed Positive LDO Regulator, 1.8V, 0.11V Dropout, PBGA4 RoHS : Compliant | 5,000 | |||
| ZMMC18R110001 | PanJit Semiconductor | Electronic Component RoHS : Compliant | 1,445 | |||
| KH214810B18R | Vitrohm Portuguesa LDA | Fixed Resistor, Wire Wound, 10W, 18ohm, 13.42V, 10% +/-Tol, -80,40ppm/Cel, Through Hole Mount RoHS : Compliant | 100 | |||
| AHA50AJB18R | YAGEO Corporation | Fixed Resistor, Wire Wound, 50W, 18ohm, 2000V, 5% +/-Tol RoHS : Compliant | 100 | |||
| ADP3339AKC18RL7 | Analog Devices Inc | Electronic Component RoHS : Not Compliant | 65 | |||
 Interstate Connecting Components | T18R0M4 | HellermannTyton | STANDARD CABLE TIE, 4 LONG 18LB, PA66, BLK 1000/PKG |
| 13,934 | |
| 031-318-RFX | Amphenol RF | BULKHD JACK |
| 25 | ||
| 2CMA105118R1000 | Amphenol Sine Systems | ABB360R5WN PANEL MOUNTED SOCKE | 0 | |||
| 2470-2085-2-15SCA-4J5-18R4N-18 | Glenair Inc | 2470-2085-2-15SCA-4J5- 18R4N-186S | 0 | |||
| UT0718RJFN | SOURIAU-SUNBANK | L8255 | 0 | |||
| UT0718RJFN | SOURIAU-SUNBANK | 0 | ||||
| DD-18RMFS-QC8001 | Amphenol LTW Technology | X-LOK, LARGE SIZE, PLASTIC, 5A RECEPTACLE | 0 | |||
| MWDM2L-25P-8K7-18R | Glenair Inc | RoHS : Compliant | 0 | |||
| MB18R20-41P | Amphenol Aerospace | 0 | ||||
| GMSM3-04S-6K1-18R | Glenair Inc | RoHS : Compliant | 0 | |||
| 660-004Z118R6-108 | Glenair Inc | PROTECTIVE COVER | 0 | |||
| MS3180-18RA | Glenair Inc | PROTECTIVE COVER |
| 0 | ||
| SFW18R-1STE1HLF | Amphenol FCi | SFW18R-1STE1HLF-SFWR |
| 0 | ||
| M83723/59-118RN | Amphenol PCD | JM8372359-118RN | 0 | |||
| M83723/59-118RN | Glenair Inc | 0 | ||||
 NexGen Digital | ADP160ACBZ-1.8-R7 | Analog Devices Inc | RoHS : Compliant | 23,427 | ||
| RC0402JR-0718RL | YAGEO Corporation | RoHS : Compliant | 16,082 | |||
| WR02X18R0FAL | Walsin Technology Corporation | RoHS : Compliant | 12,001 | |||
MPSA18RLRA | onsemi | RoHS : Not Compliant | 11,079 | |||
| CRCW0402118RFKED | Vishay Huntington | 10,000 | ||||
| ADP121-ACBZ18R7 | Analog Devices Inc | RoHS : Compliant | 2,980 | |||
| ADP170AUJZ-1.8-R7 | Analog Devices Inc | RoHS : Compliant | 2,506 | |||
HRG3216Q-18R0-D-T1 | Susumu Co Ltd | RoHS : Compliant | 1,780 | |||
| ADP3335ACPZ-1.8-R7 | Analog Devices Inc | RoHS : Compliant | 650 | |||
| WSHP2818R0200FEA | Vishay Huntington | 250 | ||||
TPS54418RTET | Texas Instruments | RoHS : Compliant | 250 | |||
| DS1818R-5+ | Maxim Integrated Products | 143 | ||||
| CPF0402B18RE1 | TE Connectivity | RoHS : Compliant | 70 | |||
| DS1818R-5-U+ | Maxim Integrated Products | RoHS : Compliant | 13 | |||
 PEI Genesis | ACC02E20-18RX-025-LC | Amphenol Corporation |
| 513 | ||
| ACC02E20-18RZ-003-LC | Amphenol Corporation | RoHS : Not Compliant |
| 513 | ||
| ACC01A20-18RY-003-LC | Amphenol Corporation |
| 36 | |||
| J62718RA2 | SOURIAU-SUNBANK |
| 0 | |||
| 159C4343P018 REV 13 | ITT Interconnect Solutions |
| 0 | |||
| 031-318-RFX | Amphenol RF |
| 0 | |||
| MS27511T18RL | Amphenol PCD |
| 0 | |||
| MS3180-18RA | Amphenol PCD |
| 0 | |||
| MS3180-18RA | SOURIAU-SUNBANK |
| 0 | |||
| MS3180-18RWL | Amphenol PCD |
| 0 | |||
| ACC01CF20-18RY-003 | Amphenol Corporation | RoHS : Not Compliant |
| 0 | ||
| ACC02A20-18RZ-003 | Amphenol Corporation | RoHS : Not Compliant |
| 0 | ||
| ACC06A20-18R-003-LC | Amphenol Corporation |
| 0 | |||
| ACC06AF20-18R-003-LC | Amphenol Corporation |
| 0 | |||
| ACC08A20-18R-003 | Amphenol Corporation |
| 0 | |||
 PUI | LPR-03R-18R | 10,599 | ||||
| LPS-01B-18R | 8,318 | |||||
| LPM-01B-18R | OptiFuse | RoHS : Compliant | 3,758 | |||
| ANS-W-20A-18R | 1,064 | |||||
| LPA-01W-18R | 1,000 | |||||
| LPC-08B-18R | 942 | |||||
| ANS-W-15A-18R | OptiFuse | 898 | ||||
| ANS-W-10A-18R | 825 | |||||
| ANM-W-20A-18R | 519 | |||||
| ANM-W-15A-18R | 401 | |||||
| LPS-02B-18R | 390 | |||||
| ANR-W-15A-18R | 168 | |||||
| ANR-W-20A-18R | 155 | |||||
| ANM-W-10A-18R | 83 | |||||
| LPC-08B-18R-BP | 3 | |||||
 Chip 1 Exchange | MLX90372GVS-ADE-318-RE | Melexis Microelectronic Integrated Systems | INSTOCK | 427,500 | ||
| RK73H W2H TTE 18R0 F | KOA Speer Electronics Inc | INSTOCK | 261,940 | |||
| 501-0 50 18R 1% BE | Vishay Vitramon | INSTOCK | 17,866 | |||
S02-18-R-3 | TE Connectivity | INSTOCK RoHS : Not Compliant | 13,871 | |||
| RC0402FR-0718R2L | INSTOCK | 9,946 | ||||
| CFR-50GT-52-18R | YAGEO Corporation | INSTOCK RoHS : Compliant | 6,383 | |||
| RC0805JR-07-18R | INSTOCK | 5,400 | ||||
| NCP1117DT18RKG | onsemi | INSTOCK RoHS : Compliant | 5,063 | |||
| RC02H18R21% | Philips Semiconductors | INSTOCK | 5,000 | |||
| D1110018R21%P5 | INSTOCK | 5,000 | ||||
BK/MDL-V-1/8-R | Eaton Corporation | INSTOCK RoHS : Compliant | 4,160 | |||
| CC0603JRNPO9BN18R0 | Samsung Electro-Mechanics | INSTOCK | 2,436 | |||
| KN-7725-351-8-R036-5% | INSTOCK | 600 | ||||
LMK05318RGZT | Texas Instruments | INSTOCK RoHS : Compliant | 358 | |||
| 60318R | INSTOCK | 5 | ||||
 Avnet Abacus | CRCW060318R0FKEA | Vishay Intertechnologies | SMD Chip Resistor 18 ohm 1 125 mW 0603 1608 Metric Thick Film General Purpose - Tape and Reel (Alt: CRCW060318R0FKEA) RoHS : Compliant | 1,870,000 | ||
| RC0402FR-0718RL | YAGEO Corporation | SMD Chip Resistor 18 Ohm 1 63 mW 0402 1005 Metric Thick Film General Purpose RC Series - Tape and Reel (Alt: RC0402FR-0718RL) RoHS : Compliant | 490,000 | |||
| BLM18RK102SN1D | Murata Manufacturing Co Ltd | Ferrite Bead 0603 1608 Metric 1 kohm 200 mA EMIFIL BLM18RK Series 08 ohm 25 (Alt: BLM18RK102SN1D) RoHS : Compliant | 304,000 | |||
| RC0603FR-0718RL | YAGEO Corporation | SMD Chip Resistor 18 Ohm 1 100 mW 0603 1608 Metric Thick Film General Purpose RC Series - Tape and Reel (Alt: RC0603FR-0718RL) RoHS : Compliant | 255,000 | |||
| CRCW080518R2FKEA | Vishay Intertechnologies | SMD Chip Resistor 182 ohm 1 250 mW 0805 2012 Metric Thick Film General Purpose - Tape and Reel (Alt: CRCW080518R2FKEA) RoHS : Compliant | 200,000 | |||
| CRCW040218R0FKED | Vishay Intertechnologies | SMD Chip Resistor 18 ohm 1 100 mW 0402 1005 Metric Thick Film General Purpose - Tape and Reel (Alt: CRCW040218R0FKED) RoHS : Compliant | 170,000 | |||
| RC0805FR-0718RL | YAGEO Corporation | SMD Chip Resistor 18 Ohm 1 125 mW 0805 2012 Metric Thick Film General Purpose RC Series - Tape and Reel (Alt: RC0805FR-0718RL) RoHS : Compliant | 75,000 | |||
| RC1206JR-0718RL | YAGEO Corporation | SMD Chip Resistor 18 Ohm 5 250 mW 1206 3216 Metric Thick Film General Purpose RC Series - Tape and Reel (Alt: RC1206JR-0718RL) RoHS : Compliant | 50,000 | |||
| RC0402FR-0718R2L | YAGEO Corporation | SMD Chip Resistor 182 Ohm 1 63 mW 0402 1005 Metric Thick Film General Purpose RC Series - Tape and Reel (Alt: RC0402FR-0718R2L) RoHS : Compliant | 50,000 | |||
| RC1206FR-0718RL | YAGEO Corporation | SMD Chip Resistor 18 Ohm 1 250 mW 1206 3216 Metric Thick Film General Purpose RC Series - Tape and Reel (Alt: RC1206FR-0718RL) RoHS : Compliant | 30,000 | |||
| CRCW120618R0JNEAIF | Vishay Intertechnologies | - Tape and Reel (Alt: CRCW120618R0JNEAIF) RoHS : Compliant | 30,000 | |||
| RC0603FR-0718R2L | YAGEO Corporation | SMD Chip Resistor 182 Ohm 1 100 mW 0603 1608 Metric Thick Film General Purpose - Tape and Reel (Alt: RC0603FR-0718R2L) RoHS : Compliant | 15,000 | |||
| RC0603JR-0718RL | YAGEO Corporation | SMD Chip Resistor 18 Ohm 5 100 mW 0603 1608 Metric Thick Film General Purpose RC Series - Tape and Reel (Alt: RC0603JR-0718RL) RoHS : Compliant | 10,000 | |||
| RC0201FR-0718RL | YAGEO Corporation | SMD Chip Resistor 18 Ohm 1 50 mW 0201 0603 Metric Thick Film General Purpose RC Series - Tape and Reel (Alt: RC0201FR-0718RL) RoHS : Compliant | 10,000 | |||
| 1SNG610018R0000 | TE Connectivity | Dome Plug for Standard Industrial Application Cable Glands Polyamide 6 Black Bag (Alt: 1SNG610018R0000) RoHS : Compliant | 1,000 | |||
Avnet Asia | VS5V0BL1QST18R | ROHM Semiconductor | Diode TVS Single Bi-Dir 5V 30.6W 2-Pin SOD-882 Emboss T/R (Alt: VS5V0BL1QST18R) RoHS : Compliant |
| 90,000 | |
| RB218RSM15STL1 | ROHM Semiconductor | (Alt: RB218RSM15STL1) RoHS : Compliant | 11,800 | |||
| BMRB00060618R24MQ1 | Pulse Electronics Corporation | (Alt: BMRB00060618R24MQ1) RoHS : Compliant | 9,000 | |||
| FP1010V18-R070-R | Eaton Corporation | BUSFP1010V18-R070-R 70NH FLAT PAC POWER (Alt: FP1010V18-R070-R) RoHS : Compliant |
| 2,000 | ||
| CRCW060318R2FKEA | Vishay Intertechnologies | SMD Chip Resistor, 18.2 ohm, ? 1%, 125 mW, 0603 [1608 Metric], Thick Film, General Purpose (Alt: CRCW060318R2FKEA) RoHS : Compliant | 0 | |||
| CRCW080518R0FKEAHP | Vishay Intertechnologies | CRCW0805-HP 100 18R 1% ET1 e3 (Alt: CRCW080518R0FKEAHP) RoHS : Compliant | 0 | |||
| RMCF0402FT18R0 | SEI Stackpole Electronics Inc | (Alt: RMCF0402FT18R0) RoHS : Compliant | 0 | |||
| FP1010V18-R100-R | Eaton Corporation | (Alt: FP1010V18-R100-R) RoHS : Compliant | 0 | |||
| BLM18RK102SN1D | Murata Manufacturing Co Ltd | (Alt: BLM18RK102SN1D) RoHS : Compliant | 0 | |||
| RB161QS-40T18R | ROHM Semiconductor | (Alt: RB161QS-40T18R) RoHS : Compliant | 0 | |||
| LTR18EZPF18R0 | ROHM Semiconductor | (Alt: LTR18EZPF18R0) RoHS : Compliant | 0 | |||
| ERJ2RKF18R0X | Panasonic Electronic Components | SMD Chip Resistor, 18 ohm, ? 1%, 100 mW, 0402 [1005 Metric], Thick Film, High Reliability, Precision (Alt: ERJ2RKF18R0X) RoHS : Compliant | 0 | |||
| RC0201FR-0718R7P | YAGEO Corporation | SMD Chip Resistor, 18.7 Ohm, ? 1%, 50 mW, 0201 [0603 Metric], Thick Film, General Purpose (Alt: RC0201FR-0718R7P) RoHS : Compliant |
| 0 | ||
| CTX01-19618-R | Eaton Corporation | (Alt: CTX01-19618-R) RoHS : Compliant | 0 | |||
| 1SNA117318R2300 | TE Connectivity | (Alt: 1SNA117318R2300) RoHS : Compliant | 0 | |||
 Avnet Silica | LDLN025PU18R | STMicroelectronics | LDO Voltage Regulator Fixed 15 V to 55 V in 120 mV drop 18 V250 mA out DFN4 (Alt: LDLN025PU18R) RoHS : Compliant | 15,000 | ||
| LDL1117S18R | STMicroelectronics | Fixed LDO Voltage Regulator 26 V to 18 V input 40 mV Dropout 18 V 12 A out SOT2234 (Alt: LDL1117S18R) RoHS : Compliant | 12,500 | |||
| LDK120C18R | STMicroelectronics | LDO Regulator Pos 18V 02A 5Pin SOT323 TR (Alt: LDK120C18R) RoHS : Compliant | 12,000 | |||
| LDK120M18R | STMicroelectronics | LDO Regulator Pos 18V 02A 5Pin SOT23 TR (Alt: LDK120M18R) RoHS : Compliant | 12,000 | |||
LD3985M18R | STMicroelectronics | LDO Regulator Pos 18V 055A 5Pin SOT23 TR (Alt: LD3985M18R) RoHS : Compliant | 12,000 | |||
| LDK120PU18R | STMicroelectronics | LDO Regulator Pos 18V 02A 6Pin DFN TR (Alt: LDK120PU18R) RoHS : Compliant | 12,000 | |||
| LD39030DTPU18R | STMicroelectronics | 300mA Very Low Quiescent Current Linear Regulator IC 18V Output Voltage 2 Tolerance 80dB PSRR Aut (Alt: LD39030DTPU18R) RoHS : Compliant | 10,000 | |||
| LDL112PV18R | STMicroelectronics | LDO Regulator Positive 18V 12A 6Pin DFN TR (Alt: LDL112PV18R) RoHS : Compliant | 9,000 | |||
| MMBT918_R1_00001 | PanJit Semiconductor | R1BTR7HF3KSOT23TRASOTRFT03TNRFT03QI05PJ (Alt: MMBT918_R1_00001) RoHS : Compliant | 9,000 | |||
| LD29080DT18R | STMicroelectronics | LDO Regulator Pos 18V 08A 3Pin2Tab DPAK TR (Alt: LD29080DT18R) RoHS : Compliant | 5,000 | |||
| AP7345D-3318RH4-7 | Diodes Incorporated | LDO Voltage Regulator Fixed 17 V to 525 V Dual Output 220 mV Drop 300 mV Drop 33 V 18 V 300 mA 8 Pins X2DFN (Alt: AP7345D-3318RH4-7) RoHS : Compliant | 5,000 | |||
| LDLN050PU18R | STMicroelectronics | (Alt: LDLN050PU18R) RoHS : Compliant | 3,000 | |||
| LD49100PU18RY | STMicroelectronics | LDO Regulator Pos 18V 1A 6Pin DFN TR (Alt: LD49100PU18RY) RoHS : Compliant | 3,000 | |||
| LD29150DT18R | STMicroelectronics | LDO Regulator Pos 18V 15A 3Pin2Tab DPAK TR (Alt: LD29150DT18R) RoHS : Compliant | 2,500 | |||
| NCP1117DT18RKG | onsemi | LDO Regulator 1 A Fixed and Adjustable Positive Vout 18 V ONSSPCLDO (Alt: NCP1117DT18RKG) RoHS : Compliant | 2,500 | |||
 Braemac Americas-Symmetry | ABM10-25.000MHZ-18-R60-4-D30-T | Abracon Corporation | CRYSTAL 25.000MHZ 10PF SMD RoHS : Compliant |
| 0 | |
ASPI-7318-R82M-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AB308-10.000MHZ-18-R50-5 | Abracon Corporation |
| 0 | |||
| AANE-BL-0018-R | Abracon Corporation |
| 0 | |||
| AB308-12.000MHZ-18-R50-5 | Abracon Corporation |
| 0 | |||
| ASPI-7318-R47M-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| TR18RDM180-01G03 BK-BK VI | Cincon Electronics Corporation | Wall Mount Medical AC Adapters |
| 0 | ||
| ASPI-7318-R33M-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AB308-10.000MHZ-18-R60 | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AB308-25.000MHZ-18-R50-5 | Abracon Corporation |
| 0 | |||
| ASPI-7318-R68M-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| TR18RDM090-01G03 BK-BK VI | Cincon Electronics Corporation | Wall Mount Medical AC Adapters |
| 0 | ||
| TR18RDM240-01G03 BK-BK VI | Cincon Electronics Corporation | MEDICAL ADAPTER AC-DC |
| 0 | ||
| TR18RDM150-01G03 BK-BK VI | Cincon Electronics Corporation | Wall Mount Medical AC Adapters |
| 0 | ||
| TR18RDM050-01G03 BK-BK VI | Cincon Electronics Corporation | Wall Mount Medical AC Adapters |
| 0 | ||
 Component Electronics, Inc | RK73H2ALTD18R2F | KOA Speer Electronics Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 105,000 | |
| RK73H1JT18R0F | KOA Speer Electronics Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 40,000 | ||
| RM06F18R2CTLF | Cal-Chip Electronics | IN STOCK SHIP TODAY |
| 10,000 | ||
| CR32A18R2FT | IBS Electronics Inc | IN STOCK SHIP TODAY RoHS : Unknown |
| 5,000 | ||
| 5063JD18R70F | Vishay BCcomponents | IN STOCK SHIP TODAY |
| 4,948 | ||
| RM12F18R7CT | Cal-Chip Electronics | IN STOCK SHIP TODAY RoHS : Compliant |
| 3,700 | ||
| CRA06S080318R2FRT1 | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Compliant | 3,000 | |||
| RSF1S-18R0JT | SPI Sannohm | IN STOCK SHIP TODAY | 2,700 | |||
| RC12H-118R-1% | Philips Semiconductors | IN STOCK SHIP TODAY |
| 1,000 | ||
| BLM18RK102SN1D | Murata Manufacturing Co Ltd | IN STOCK SHIP TODAY RoHS : Compliant |
| 800 | ||
| WSL-2512-.018R-1%-R86 | Vishay Intertechnologies | IN STOCK SHIP TODAY |
| 606 | ||
| RK73H1ETTP18R7F | KOA Speer Electronics Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 297 | ||
| CRCW040218R0FKED | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Compliant |
| 140 | ||
| CR25J-18R | Philips Semiconductors | IN STOCK SHIP TODAY |
| 100 | ||
| PW5-18R-10% | TT Electronics Resistors | IN STOCK SHIP TODAY | 3 | |||
 DB Roberts | WITA-18R-M | Essentra Components | Cable TieLockNatural4.72 inLg18 Lb |
| 29,475 | |
| WIT-18R2A-4-01 | Essentra Components | Cbl TieArrow MntNat4.52 in 18 Lb |
| 6,904 | ||
WITA-18R-UVB-M | Essentra Components | Cable TieLockUV Black4.72 inLg18 Lb |
| 935 | ||
| PNT600-01-518R | Pop Rivets | 0 | ||||
| WITE-18RC-M | Essentra Components | 0 | ||||
| RKW-12-18-RD | Essentra Components | CABLE TIE, HOOK LOOP, RED | 0 | |||
| WIT-18RA-4-01-M | Essentra Components | Cbl TieArrow MntNat4.52 in 18 Lb | 0 | |||
| WIT-18R-V0-M | Essentra Components | 0 | ||||
| WIT-18RA-01 | Essentra Components | Cbl TieArrow MntNat4.3 in 18 Lb. | 0 | |||
| WITA-F2-18R-M | Essentra Components | CBL TIE,FLAG,NAT,4.3 LG,18LB | 0 | |||
| WIT-18R-UVB-M | Essentra Components | 0 | ||||
WIT-18R1A-4-01 | Essentra Components | Cbl TieArrow MntNat4.52 in 18 Lb | 0 | |||
| NM-18-R18 | Essentra Components | MS25281-R18 Loop Clamp Green1-1/8 in Hold Clamp w/Eyelet Green | 0 | |||
| WIT-18R-M | Essentra Components | 0 | ||||
| WITA-18R-HS-M | Essentra Components | Cable TieLockHS Blk4.72 inLg18 Lb | 0 | |||
 EBV Elektronik | 1N5818RLG | onsemi | 10 A 30 V Schottky Rectifier (Alt: 1N5818RLG) RoHS : Compliant | 5,000 | ||
| LDK120M18R | STMicroelectronics | LDO Regulator Pos 18V 02A 5Pin SOT23 TR (Alt: LDK120M18R) RoHS : Compliant | 3,000 | |||
| ST1S12G18R | STMicroelectronics | DCDC Switching Regulator Fixed Synchronous Buck Step Down Single Output 18 V 700 mA 17 MHz 5 Pins TSOT23 (Alt: ST1S12G18R) RoHS : Compliant | 3,000 | |||
| STLQ020J18R | STMicroelectronics | LDO Regulator Pos 18V 02A 4Pin FlipChip TR (Alt: STLQ020J18R) RoHS : Compliant | 3,000 | |||
| LDK130PU18R | STMicroelectronics | LDO Regulator Pos 18V 03A 6Pin VFDFPN TR (Alt: LDK130PU18R) RoHS : Compliant | 3,000 | |||
| LDLN025M18R | STMicroelectronics | POWER MANAGEMENT (Alt: LDLN025M18R) RoHS : Compliant | 3,000 | |||
| 19-218/R6C-FM2P1B7Y/3T | Everlight Electronics Co Ltd | LED Single Chip Red 631nm 25mA 2Pin SMD TR (Alt: 35R60198CD) RoHS : Compliant | 3,000 | |||
| LD29080DT18R | STMicroelectronics | LDO Regulator Pos 18V 08A 3Pin2Tab DPAK TR (Alt: LD29080DT18R) RoHS : Compliant | 2,500 | |||
| NCP1117DT18RKG | onsemi | LDO Regulator 1 A Fixed and Adjustable Positive Vout 18 V ONSSPCLDO (Alt: NCP1117DT18RKG) RoHS : Compliant | 2,500 | |||
| ST1S15J18R | STMicroelectronics | Conv DCDC Single Step Down 23V to 55V 6Pin FlipChip TR (Alt: ST1S15J18R) RoHS : Compliant | 0 | |||
| LDK120C18R | STMicroelectronics | LDO Regulator Pos 18V 02A 5Pin SOT323 TR (Alt: LDK120C18R) RoHS : Compliant | 0 | |||
| LDL112PU18R | STMicroelectronics | LDO Regulator Positive 18V 12A 6Pin DFN TR (Alt: LDL112PU18R) RoHS : Compliant | 0 | |||
| STM1818RWX7F | STMicroelectronics | (Alt: STM1818RWX7F) RoHS : Compliant | 0 | |||
| BZY55B18 RYG | Taiwan Semiconductor | (Alt: BZY55B18 RYG) RoHS : Compliant | 0 | |||
| NCV1117DT18RKG | onsemi | Linear Voltage Regulator 1 A High PSRR Vout 18 V ONSSPCLDO (Alt: NCV1117DT18RKG) RoHS : Compliant | 0 | |||
 ECCO | 9794-18R/R | Amphenol Industrial Operations |
| 2,829 | ||
 Flip Electronics | EFC6618R-A-TF | onsemi | Stock, Ship Today | 185,000 | ||
| NCV1117DT18RKG | onsemi | Stock, Ship Today RoHS : Compliant |
| 57,200 | ||
| MK65FN2M0VMI18R | NXP Semiconductors | Stock RoHS : Compliant | 6,000 | |||
| NCV59151DS18R4G | onsemi | Stock, Ship Today RoHS : Compliant |
| 2,976 | ||
| NCP1117DT18RKG | onsemi | Stock, Ship Today RoHS : Compliant |
| 2,500 | ||
NCP5663DS18R4G | onsemi | Stock, Ship Today RoHS : Compliant |
| 2,400 | ||
| KK65FX1M0CAC18R | NXP Semiconductors | Stock | 1,500 | |||
| MK65FX1M0CAC18R | NXP Semiconductors | Stock RoHS : Compliant | 1,500 | |||
| NCP59151DS18R4G | onsemi | Stock, Ship Today RoHS : Compliant |
| 800 | ||
| NCP59301DS18R4G | onsemi | Stock, Ship Today RoHS : Compliant |
| 700 | ||
MK74CB218RLF | Integrated Device Technology Inc | Stock, Ship Today RoHS : Compliant |
| 49 | ||
| MK65FN2M0CAC18R | NXP Semiconductors | Stock, Ship Today RoHS : Compliant | 9 | |||
 Master Electronics | 031-318-RFX | Amphenol RF | RF Connector BNC Straight Crimp Jack for RG-174 RG-188 Bulkhead 50 Ohm RoHS : Compliant |
| 673 | |
| TE2500B18RJ | TE Connectivity | TE 2500W 18R 5% Bracket Tubular Resistors Fixed Resistor RoHS : Compliant |
| 10 | ||
| 9918-RED-100 | Belden Inc | Hook-up Wire 18AWG 30.48m 2.01mm Tinned Copper Red 300VAC 20A RoHS : Compliant |
| 2 | ||
| MTSW-103-09-G-S-118-RA | Samtec Inc | .100 Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTSW-105-22-L-S-118-RE | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTSW-106-10-G-S-018-RA | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTSW-116-10-L-D-318-RA | Samtec Inc | RoHS : Compliant |
| 0 | ||
| ANS-W-15A-18R | OptiFuse | Fuse Tap Mini Blade LowPro 32V 15A RoHS : Compliant |
| 0 | ||
| AI-GB-1-8-RD | Phoenix Contact | AI-GB 1-8 RD RoHS : Compliant |
| 0 | ||
| HMTSW-208-23-G-S-118-RA | Samtec Inc | .100 HIGH-TEMP VARIABLE RoHS : Compliant |
| 0 | ||
| 1SNA232118R2600 | TE Connectivity | ABB-CONNECTION - CONNECTION - MARKERS RoHS : Compliant |
| 0 | ||
| CPF0402B18R7E | TE Connectivity | Thin Film Resistor - SMD 0402 - 18.7 ohm (+/-) 0.1% - 1/16 W - 25V - TCR (+/-) 25ppm/°C - -55°C to +155°C - Tape&Reel RoHS : Compliant |
| 0 | ||
| CPF0805B18R7E1 | TE Connectivity | Thin Film Resistor - SMD 0805 - 18.7 ohm (+/-) 0.1% - 1/10 W - 100V - TCR (+/-) 25ppm/°C - -55°C to +155°C - Tape&Reel RoHS : Compliant |
| 0 | ||
| 5300-18-RC | Bourns Inc | RF Choke Bobbin Core 27uH 10% 1KHz Ferrite 950mA 220mOhm DCR AXL Bag RoHS : Compliant |
| 0 | ||
| 024253-1618-R | ITT Interconnect Solutions | Circular Connector - Box Mount - Contact Arrangement: 20-29 - Sockets - Threaded Coupling - Short Endbell No Cable Clamp RoHS : Not Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3C8818/RD | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-RD, RF Cable Type: Belden 1694A-RD, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable Using 75 Ohm 1694A-RD Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-RD coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/RD, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/RD is built with Belden 1694A-RD which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-RD coax. | 368 | ||
| PE3C8818/RD-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-RD, RF Cable Type: Belden 1694A-RD, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 36 Inch Length Using 75 Ohm 1694A-RD Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-RD coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/RD-36, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/RD-36 is built with Belden 1694A-RD which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-RD coax. |
| 105 | ||
| PE3C8818/RD-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-RD, RF Cable Type: Belden 1694A-RD, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1694A-RD Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-RD coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/RD-12, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/RD-12 is built with Belden 1694A-RD which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-RD coax. |
| 105 | ||
| PE3C8818/RD-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-RD, RF Cable Type: Belden 1694A-RD, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 72 Inch Length Using 75 Ohm 1694A-RD Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-RD coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/RD-72, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/RD-72 is built with Belden 1694A-RD which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-RD coax. |
| 86 | ||
| PE3C8818/RD-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-RD, RF Cable Type: Belden 1694A-RD, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1694A-RD Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-RD coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/RD-120, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/RD-120 is built with Belden 1694A-RD which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-RD coax. |
| 52 | ||
| PE3C8818/RD-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-RD, RF Cable Type: Belden 1694A-RD, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1694A-RD Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-RD coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/RD-300, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/RD-300 is built with Belden 1694A-RD which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-RD coax. |
| 20 | ||
| PE9936-18-R | Pasternack Enterprises | Key Specifications, Connector Series 1: Banana, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Series 2: Spade, Connector Gender 2: Lug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: RD18AWGWire, RF Cable Type: Red Wire. Banana Plug to Spade Lug Cable 18 Inch Length Using Red Wire. Very low frequency equipment test lead cable assembly PE9936-18-R from Pasternack is manufactured to a high standard of quality. This Pasternack RF test lead is built with a banana cable connector on side 1. Our banana test lead assembly has a spade connector on side 2. Banana to banana RF test equipment lead cable is manufactured with plug gender for side 1 and lug for side 2. Banana plug to spade lug cable test lead for RF is constructed with Red Wire cable and the impedance is. PE9936-18-R Banana plug to spade lug test equipment lead using Red Wire cable has a 18 inch length. Pasternack banana to spade Red Wire very low frequency cable test equipment lead is part of over 40,000 RF, microwave and millimeter wave components from supplier Pasternack. Our test equipment lead with banana to spade connectors and Red Wire cable is in-stock and Pasternack is where to buy your breakout test lead cable for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. Custom low frequency equipment test lead cable assemblies can be built and shipped quickly from our Irvine, CA location in the United States. | 0 | |||
| PE9933-18-R | Pasternack Enterprises | Key Specifications, Connector Series 1: Banana, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Series 2: Mini Alligator, Connector Gender 2: Clip, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: RD18AWGWire, RF Cable Type: Red Wire. Banana Plug to Mini Alligator Clip Cable 18 Inch Length Using Red Wire. Very low frequency equipment test lead cable assembly PE9933-18-R from Pasternack is manufactured to a high standard of quality. This Pasternack RF test lead is built with a banana cable connector on side 1. Our banana test lead assembly has a mini alligator connector on side 2. Banana to banana RF test equipment lead cable is manufactured with plug gender for side 1 and clip for side 2. Banana plug to mini alligator clip cable test lead for RF is constructed with Red Wire cable and the impedance is. PE9933-18-R Banana plug to mini alligator clip test equipment lead using Red Wire cable has a 18 inch length. Pasternack banana to mini alligator Red Wire very low frequency cable test equipment lead is part of over 40,000 RF, microwave and millimeter wave components from supplier Pasternack. Our test equipment lead with banana to mini alligator connectors and Red Wire cable is in-stock and Pasternack is where to buy your breakout test lead cable for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. Custom low frequency equipment test lead cable assemblies can be built and shipped quickly from our Irvine, CA location in the United States. | 0 | |||
| PE9932-18-R | Pasternack Enterprises | Key Specifications, Connector Series 1: Alligator, Connector Gender 1: Clip, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Series 2: Alligator, Connector Gender 2: Clip, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: RD18AWGWire, RF Cable Type: Red Wire. Alligator Clip to Alligator Clip Cable 18 Inch Length Using Red Wire. Very low frequency equipment test lead cable assembly PE9932-18-R from Pasternack is manufactured to a high standard of quality. This Pasternack RF test lead is built with a alligator cable connector on side 1. Our alligator test lead assembly has a alligator connector on side 2. Alligator to alligator RF test equipment lead cable is manufactured with clip gender for side 1 and clip for side 2. Alligator clip to alligator clip cable test lead for RF is constructed with Red Wire cable and the impedance is. PE9932-18-R Alligator clip to alligator clip test equipment lead using Red Wire cable has a 18 inch length. Pasternack alligator to alligator Red Wire very low frequency cable test equipment lead is part of over 40,000 RF, microwave and millimeter wave components from supplier Pasternack. Our test equipment lead with alligator to alligator connectors and Red Wire cable is in-stock and Pasternack is where to buy your breakout test lead cable for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. Custom low frequency equipment test lead cable assemblies can be built and shipped quickly from our Irvine, CA location in the United States. | 0 | |||
| PE9931-18-R | Pasternack Enterprises | Key Specifications, Connector Series 1: Banana, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Series 2: Alligator, Connector Gender 2: Clip, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: RD18AWGWire, RF Cable Type: Red Wire. Banana Plug to Alligator Clip Cable 18 Inch Length Using Red Wire. Very low frequency equipment test lead cable assembly PE9931-18-R from Pasternack is manufactured to a high standard of quality. This Pasternack RF test lead is built with a banana cable connector on side 1. Our banana test lead assembly has a alligator connector on side 2. Banana to banana RF test equipment lead cable is manufactured with plug gender for side 1 and clip for side 2. Banana plug to alligator clip cable test lead for RF is constructed with Red Wire cable and the impedance is. PE9931-18-R Banana plug to alligator clip test equipment lead using Red Wire cable has a 18 inch length. Pasternack banana to alligator Red Wire very low frequency cable test equipment lead is part of over 40,000 RF, microwave and millimeter wave components from supplier Pasternack. Our test equipment lead with banana to alligator connectors and Red Wire cable is in-stock and Pasternack is where to buy your breakout test lead cable for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. Custom low frequency equipment test lead cable assemblies can be built and shipped quickly from our Irvine, CA location in the United States. | 0 | |||
| PE9930-18-R | Pasternack Enterprises | STACKING BANANA PLUG TO STACKING BANANA PLUG - 18" RED RATED AT 2500 VOLTS, 5 AMPS & + 50 DEGREE C. | 0 | |||
| PE9935-18-R | Pasternack Enterprises | Key Specifications, Connector Series 1: Alligator, Connector Gender 1: Clip, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Series 2: Spade, Connector Gender 2: Lug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: RD18AWGWire, RF Cable Type: Red Wire. Alligator Clip to Spade Lug Cable 18 Inch Length Using Red Wire. Very low frequency equipment test lead cable assembly PE9935-18-R from Pasternack is manufactured to a high standard of quality. This Pasternack RF test lead is built with a alligator cable connector on side 1. Our alligator test lead assembly has a spade connector on side 2. Alligator to alligator RF test equipment lead cable is manufactured with clip gender for side 1 and lug for side 2. Alligator clip to spade lug cable test lead for RF is constructed with Red Wire cable and the impedance is. PE9935-18-R Alligator clip to spade lug test equipment lead using Red Wire cable has a 18 inch length. Pasternack alligator to spade Red Wire very low frequency cable test equipment lead is part of over 40,000 RF, microwave and millimeter wave components from supplier Pasternack. Our test equipment lead with alligator to spade connectors and Red Wire cable is in-stock and Pasternack is where to buy your breakout test lead cable for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. Custom low frequency equipment test lead cable assemblies can be built and shipped quickly from our Irvine, CA location in the United States. | 0 | |||
 Venkel Ltd. | PWCR0603-QK-18R7DT | VENKEL LTD | Pulse Withstanding CR;0603;1/10W;�100PPM;18.7R;�0.5% RoHS : Compliant | 0 | ||
| PWCR0603-TK-18R2DT | VENKEL LTD | Pulse Withstanding CR;0603;1/4W;�100PPM;18.2R;�0.5% RoHS : Compliant | 0 | |||
| PWCR0603-UL-18R0DT | VENKEL LTD | Pulse Withstanding CR;0603;1/3W;�200PPM;18R;�0.5% RoHS : Compliant | 0 | |||
| PWCR2512-JK-18R7FT | VENKEL LTD | Pulse Withstanding CR;2512;2W;�100PPM;18.7R;�1% RoHS : Compliant | 0 | |||
| AGCR2010-XK-18R0DT | VENKEL LTD | Auto Grade Resistor;2010;1W;�100PPM;18R;�0.5% RoHS : Compliant | 0 | |||
| HPTF1206-TN-18R7FT | VENKEL LTD | High Power Thin Film CR;1206;1/4W;�10PPM;18.7R;�1% RoHS : Compliant | 0 | |||
| HPTF1210-UC-18R2DT | VENKEL LTD | High Power Thin Film CR;1210;1/3W;�50PPM;18.2R;�0.5% RoHS : Compliant | 0 | |||
| HPTF1210-UE-18R0DT | VENKEL LTD | High Power Thin Film CR;1210;1/3W;�25PPM;18R;�0.5% RoHS : Compliant | 0 | |||
| HPTF1210-UN-18R0CT | VENKEL LTD | High Power Thin Film CR;1210;1/3W;�10PPM;18R;�0.25% RoHS : Compliant | 0 | |||
| TFCR0402-16W-C-18R9BT | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;18.9R;�0.1% RoHS : Compliant | 0 | |||
| TFCR0402-16W-E-18R4CT | VENKEL LTD | Thin Film CR;0402;1/16W;�25PPM;18.4R;�0.25% RoHS : Compliant | 0 | |||
| TFCR0402-16W-E-18R4DT-1K | VENKEL LTD | Thin Film CR;0402;1/16W;�25PPM;18.4R;�0.5% RoHS : Compliant | 0 | |||
| TFCR0603-10W-K-18R2BT | VENKEL LTD | Thin Film CR;0603;1/10W;�100PPM;18.2R;�0.1% RoHS : Compliant | 0 | |||
| TFCR0603-10W-K-18R9DT-1K | VENKEL LTD | Thin Film CR;0603;1/10W;�100PPM;18.9R;�0.5% RoHS : Compliant | 0 | |||
| TFCR0603-16W-E-18R4DT | VENKEL LTD | Thin Film CR;0603;1/16W;�25PPM;18.4R;�0.5% RoHS : Compliant | 0 | |||
 Vyrian | ADP3338AKCZ-1.8-RL | Analog Devices Inc | Fixed Positive LDO Regulator, 1.8V, 0.4V Dropout, PDSO4 RoHS : Compliant | 12,301 | ||
| ADP1712AUJZ-1.8-R7 | Analog Devices Inc | Fixed Positive LDO Regulator, 1.8V, 0.27V Dropout, CMOS, PDSO5 RoHS : Compliant | 12,276 | |||
| E2E-X10MB218-R2M | OMRON Corporation | Inductive Sensor, 0mm Min, 11mm Max, Cylindrical RoHS : Compliant | 11,179 | |||
| ADP7142ACPZN1.8-R7 | Analog Devices Inc | Fixed Positive LDO Regulator, 1.8V, 0.42V Dropout, CMOS, PDSO6 RoHS : Compliant | 10,451 | |||
| ADM1818-R22ART-REEL7 | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +2.18V, PDSO3 RoHS : Not Compliant | 9,414 | |||
| BQ24618RGET | Texas Instruments | Battery Charge Controller, NMOS, PQCC24 RoHS : Compliant | 8,602 | |||
| STM1818RWX7F | STMicroelectronics | RoHS : Compliant | 7,959 | |||
| E2E-X16MC218-R5M | OMRON Corporation | Inductive Sensor, 0mm Min, 17.6mm Max, Cylindrical RoHS : Compliant | 7,956 | |||
| ADM7170ACPZ-1-8-R7 | Analog Devices Inc | 6,937 | ||||
| ADP3156JR-1-8-REEL | Analog Devices Inc | 6,747 | ||||
| ST1S15J18R | STMicroelectronics | RoHS : Compliant | 6,347 | |||
| NCV1117DT18RKG | onsemi | Fixed Positive LDO Regulator, 1.8V, 1.2V Dropout, BIPolar, PSSO2 RoHS : Compliant | 5,860 | |||
| ADP3335ACPZ-1-8-R7 | Analog Devices Inc | 5,700 | ||||
| LD2985AM18R | STMicroelectronics | Fixed Positive LDO Regulator, 1.8V, 0.575V Dropout, BIPolar, PDSO5 RoHS : Compliant | 4,461 | |||
| E2E-X14C118-R5M | OMRON Corporation | Inductive Sensor, 0mm Min, 15.4mm Max, Cylindrical RoHS : Compliant | 4,426 | |||
 Waytek, Inc. | T18R0M4 111-01841 | HellermannTyton | HellermannTyton T18R0M4 standard cable tie is a self-locking nylon tie with a 4" length for general-purpose wire, cable, hose, and tubing bundling. Its one-piece construction supports reliable fastening, clean harness organization, and everyday use in electrical and equipment applications. |
| 231,000 | |
| T18R0C2 111-00405 | HellermannTyton | HellermannTyton T18R0C2 standard cable tie is a self-locking nylon tie with a 4" length for general-purpose wire, cable, hose, and tubing bundling. Its one-piece construction supports reliable fastening, clean harness organization, and everyday use in electrical and equipment applications. |
| 42,200 | ||
| T18R9M4 111-01872 | HellermannTyton | HellermannTyton T18R9M4 standard cable tie is a self-locking nylon tie with a 4" length for general-purpose wire, cable, hose, and tubing bundling. Its one-piece construction supports reliable fastening, clean harness organization, and everyday use in electrical and equipment applications. |
| 27,000 | ||
| LPR-02B-18R | OptiFuse | InLine Fuse Holder ATO ATC 10A 18GA Tinned UL1015 4" Leads RED WIRE AND BLACK BASE |
| 13,239 | ||
| T18R0UVM4 | HellermannTyton | HellermannTyton T18R0UVM4 UV-resistant cable tie is a black self-locking nylon tie with a 4" length for outdoor and exposed-environment bundling. Its UV-stabilized construction supports durable wire, cable, hose, and tubing fastening where sunlight resistance and long-term retention matter. |
| 4,000 | ||
 Win Source Electronics | BLM18RK102SN1D | Murata Manufacturing Co Ltd | FERRITE BEAD 1 KOHM 0603 1LN RoHS : Compliant |
| 400,000 | |
| RB161QS-40T18R | ROHM Semiconductor | DIODE SCHOTTKY 40V 1A SMD1006 RoHS : Compliant |
| 216,000 | ||
| STM1818RWX7F | STMicroelectronics | IC RESET CIRCUIT 2.55V OD PB SOT RoHS : Compliant |
| 159,000 | ||
TPS54318RTER | Texas Instruments | IC REG BUCK ADJ 3A SYNC 16WQFN / Conv DC-DC 2.95V to 6V Synchronous Step Down Single-Out 0.8V to 4.5V 3A 16-Pin WQFN EP T/R RoHS : Compliant |
| 57,750 | ||
LP5018RSMR | Texas Instruments | IC LED DRVR LIN I2C 35MA 32VQFN / LED Driver IC 18 Output Linear I²C Dimming 35mA 32-VQFN (4x4) RoHS : Compliant |
| 45,360 | ||
| TPS54218RTE | Texas Instruments |
| 38,339 | |||
| ADM7172ACPZ-1.8-R7 | Analog Devices Inc | IC REG LINEAR 1.8V 2A 8LFCSP RoHS : Compliant |
| 24,000 | ||
| ADM7171ACPZ-1.8-R7 | Analog Devices Inc | IC REG LINEAR 1.8V 1A 8LFCSP RoHS : Compliant |
| 8,600 | ||
| ADP3335ACPZ-1.8-R7 | Analog Devices Inc | IC REG LINEAR 1.8V 500MA 8LFCSP RoHS : Compliant |
| 4,780 | ||
LMK03318RHST | Texas Instruments | IC CLOCK GENERATOR PLL 48WQFN / Clock Generator 1000MHz-OUT 48-Pin WQFN EP T/R RoHS : Compliant |
| 4,220 | ||
| DS1818R-5 | Maxim Integrated Products | IC 3.06V W/PB 5% SOT23-3 RoHS : Not Compliant |
| 3,228 | ||
| ADP3338AKCZ-1.8-RL | Analog Devices Inc | IC REG LDO 1.8V 1A SOT223-3 RoHS : Compliant |
| 2,530 | ||
| ADP3338AKCZ-1.8-RL7 | Analog Devices Inc |
| 2,520 | |||
| ADM7170ACPZ-1.8-R7 | Analog Devices Inc | Adjustable and fixed output voltage options | IC REG LINEAR 1.8V 500MA 8LFCSP RoHS : Compliant |
| 2,207 | ||
| LMK05318RGZT | Texas Instruments | IC ULTRA LOW JITTER SNGL 48VQFN / IC 800MHz 2 48-VFQFN Exposed Pad RoHS : Compliant |
| 40 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼ 
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand