| Electronic Components Datasheet Search |
|
2012FCD-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() PUI | 2012-1X02G00S-2.8-2.8-13. | 18,000 | ||||
| 2012-1X18G00S/083/045R/I2 | 4,258 | |||||
| 2012-2X12MTS-3-3-10B-H1.5 | 2,480 | |||||
| 2012-2X10G01S-5.6-5.6J | 1,900 | |||||
| 2012-2X13G00S/028/052/K | 1,062 | |||||
| 2012-2X10G00S/031/066/P | 492 | |||||
| 2012-1X17G00S/8.38/5.08/Q | 400 | |||||
| 2012-1X18G00S/8.3/4.5/RB | 300 | |||||
| 2012-1X40G00S/028/031/D | 300 | |||||
| 2012-1X40G00S/020/020/J | 282 | |||||
| 2012-1X40G01S/040/090/N | 250 | |||||
| 2012-2X08G00S-2.9-4.6-22. | 190 | |||||
| 2012-1X40G00S/2.0/12.0/M | 146 | |||||
| 2012-1X36G00S020/020/G | 24 | |||||
| 2012-1X40G00S/030/060/T | 9 | |||||
![]() Richardson RFPD | ATS012012012-SF-2K | Advanced Thermal Solutions Inc | Heat Sink Passive BGA Straight Adhesive Aluminum 1 RoHS : Compliant |
| 0 | |
| MADP-011201-2012 | MACOM | RF PIN DIODE RoHS : Compliant | 0 | |||
| MCL2012V1-1R0-R | Eaton Corporation | Inductor RF Chip Multi-Layer 1uH 20% 1MHz 0.22A 0. RoHS : Compliant |
| 0 | ||
| MCL2012V1-5R6-R | Eaton Corporation | Inductor RF Chip Multi-Layer 5.6uH 20% 1MHz 0.1A 0 RoHS : Compliant |
| 0 | ||
| MCL2012V2-101-R | Eaton Corporation | Inductor RF Chip Multi-Layer 0.1uH 5% 100MHz 18Q-F RoHS : Compliant |
| 0 | ||
| MCL2012V2-390-R | Eaton Corporation | Inductor RF Chip Multi-Layer 0.039uH 5% 100MHz 15Q RoHS : Compliant |
| 0 | ||
| MCL2012V2-471-R | Eaton Corporation | Inductor RF Chip Multi-Layer 0.47uH 5% 50MHz 10Q-F RoHS : Compliant |
| 0 | ||
| MCLA2012V1-2R2-R | Eaton Corporation | Inductor RF Chip Multi-Layer 2.2uH 10% 10MHz 35Q-F RoHS : Compliant |
| 0 | ||
| MCLA2012V1-6R8-R | Eaton Corporation | Inductor RF Chip Multi-Layer 6.8uH 10% 4MHz 30Q-Fa RoHS : Compliant |
| 0 | ||
| 095-850-162-012 | Amphenol Corporation | HD-BNC Straight Plug to BNC Straight Plug on Belde RoHS : Compliant |
| 0 | ||
| WCLA2012V1-101-R | Eaton Corporation | Inductor RF Chip Wirewound 0.1uH 5% 150MHz 50Q-Fac RoHS : Compliant |
| 0 | ||
| WCLA2012V1-390-R | Eaton Corporation | Inductor RF Chip Wirewound 0.039uH 5% 250MHz 55Q-F RoHS : Compliant |
| 0 | ||
| WCLA2012V1-471-R | Eaton Corporation | Inductor RF Chip Wirewound 0.47uH 5% 50MHz 33Q-Fac RoHS : Compliant |
| 0 | ||
| MFBW1V2012-050-R | Eaton Corporation | Ferrite Beads Multi-Layer 5Ohm 0Ohm to 15Ohm 100MH RoHS : Compliant |
| 0 | ||
| MCLA2012V1-R180-R | Eaton Corporation | Inductor RF Chip Multi-Layer 0.18uH 10% 25MHz 20Q- RoHS : Compliant |
| 0 | ||
![]() Rutronik | MLZ2012N1R0LT000 | TDK Corporation | MLZ2012N 1uH 220mA 20% MLT RoHS : Compliant |
| 304,000 | |
| CQ2012X7R104K500NRB | Samwha Electronics | KC 100nF 0805 10% 50V X7R AECQ RoHS : Compliant |
| 144,000 | ||
| CQ2012X7R105K500NRE | Samwha Electronics | KC 1,0µF 0805 10% 50V X7R AECQ RoHS : Compliant |
| 123,000 | ||
| MPZ2012S221ATD25 | TDK Corporation | MPZ2012 220R 3A 25% DC=0,04R RoHS : Compliant |
| 76,000 | ||
| MEM2012S25R0T001 | TDK Corporation | MEM2012 25MHz 100mA 10V RoHS : Compliant |
| 48,000 | ||
| CS2012X7R224K500NRE | Samwha Electronics | KC 220nF 0805 10% 50V X7R RoHS : Compliant |
| 36,000 | ||
| MEM2012F50R0T001 | TDK Corporation | MEM2012F50 50Mhz 0,2A 70pF RoHS : Compliant |
| 20,000 | ||
| MLZ2012DR10DT000 | TDK Corporation | MLZ2012D 100nH 1000mA 20% MLT RoHS : Compliant |
| 16,000 | ||
| MLZ2012N100LT000 | TDK Corporation | MLZ2012N 10uH 110mA 20% MLT RoHS : Compliant |
| 12,000 | ||
| MPZ2012S221AT000 | TDK Corporation | MPZ2012 220R 3000mA 25% DC0,04 RoHS : Compliant |
| 12,000 | ||
| MPZ2012S102ATD25 | TDK Corporation | MPZ2012 1000R 1,5A 25% Rdc=0,15 RoHS : Compliant |
| 8,000 | ||
| MLZ2012M2R2HT000 | TDK Corporation | MLZ2012M 2,2uH 400mA 20% MLT RoHS : Compliant |
| 4,000 | ||
| LY20-12P-DT1-P1E-BR | JAE Electronics | 12P Pin Header STRAIGHT THT RoHS : Compliant |
| 320 | ||
| MKP1848E52012JI2 | Vishay Intertechnologies | FP 2,0uF 1200Vdc 5% P22,5 MKP RoHS : Compliant |
| 220 | ||
| MLZ2012N6R8LT000 | TDK Corporation | MLZ2012N 6,8uH 550mA 20% MLT RoHS : Compliant |
| 10 | ||
![]() Braemac Americas-Symmetry | ASPI-2012-R24M-T![]() | Abracon Corporation | RoHS : Compliant |
| 0 | |
ATFC-0201-2N2B-T![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
ASPI-2012-150M-T![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
ATFC-0201-2N6B-T![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
AMELA2012S-R68MT![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AOTA-N201208S-2R2MT | Abracon Corporation |
| 0 | |||
| AOTA-N201210S-1R0MT | Abracon Corporation |
| 0 | |||
| ACML-0201-241-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
AOC2012XAJC-12.8000C![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AOTA-N201208S-R11NT | Abracon Corporation |
| 0 | |||
| MUZP-220-12-JBE-C | Nipron Co | 220W 12V medical power supply |
| 0 | ||
| MUZPT-120-12-J0L-K | Nipron Co | 120W 12V medical power supply |
| 0 | ||
| ACAG0201-2450-EVB | Abracon Corporation | RoHS : Compliant |
| 0 | ||
AOC2012VAJC-12.8000C![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
AOC2012XAJC-25.0000C![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
![]() DB Roberts | 2012 | The Ohio Nut And Bolt Co | SQR WELD NUT, 1/2-13 LNG PILOT |
| 3,135 | |
| SHCM5X20-12.9-STL-BO | SOCKET HEAD CAP SCR | Socket Head Cap Screw |
| 149 | ||
| 2012 | Heyco | SB 312-3 BRASS #15454 | 0 | |||
| 47-91-201-25 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| MA-07-252-01-200 | Southco | Quality and style are the essence of the McCoy Series of entry door locks. They provide a solid feel for actuation and offer a variety of finishes in 100 marine-grade corrosion-resistant materials to present a premium quality look for stylish swinging doo | 0 | |||
| R4-10-22-201-20 | Southco | These robust latching solutions for doors and panels of heavy-duty equipment and vehicles combine rotary-action security with push-to-close convenience. Their compact design provides concealed operation while tolerating misalignment on closing engaging | 0 | |||
| 56-170-2-012 | Southco | Southcos 56 Spring-Loaded Plungers provide convenient installation and removal of components. Activated with a simple pull these plungers offer simplified positioning of sliding component and quick-release for easy removal. The 56 series provides design | 0 | |||
| R4-10-10-201-20 | Southco | These robust latching solutions for doors and panels of heavy-duty equipment and vehicles combine rotary-action security with push-to-close convenience. Their compact design provides concealed operation while tolerating misalignment on closing engaging | 0 | |||
| 4201-2520-SS | RAF Electronic Hardware | 0 | ||||
| 74200-12012 | Avdel | AIR SUPPLY TUBE | 0 | |||
| 47-63-201-20 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-90-201-24 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| E3-1220-122 | Southco | E3-1220-122 | 0 | |||
| IBC-0420-12 | Standard Insert | Blind-end protects the threads from plastic intrusion.Aluminum inserts ideal for light weight designs.Aluminum and stainless steel inserts offer lead-free alternative. |
| 0 | ||
| CV-120-12 | Shercon Inc | 0 | ||||
![]() EBV Elektronik | VI20120S-E3/4W | Vishay Intertechnologies | 20A120VTRENCH SKY RECT (Alt: VI20120S-E3/4W) RoHS : Compliant | 7,000 | ||
STPS20120D![]() | STMicroelectronics | Schottky Rectifier 120 V 20 A Single TO220AC 2 Pins 930 mV (Alt: STPS20120D) RoHS : Compliant | 1,950 | |||
DSC1101DM2-012.0000T![]() | Microchip Technology Inc | MEMS Oscillator 12 MHz SMD 25mm x 2mm 25 ppm 3 V DSC1101 (Alt: DSC1101DM2-012.0000T) RoHS : Compliant | 1,000 | |||
| FFSH20120ADN-F085 | onsemi | Silicon Carbide SiC Schottky Diode EliteSiC 10A 1200V D1 TO2473L (Alt: FFSH20120ADN-F085) RoHS : Compliant | 900 | |||
| FFSB20120A | onsemi | Silicon Carbide SiC Schottky Diode EliteSiC 20 A 1200 V D1 (Alt: FFSB20120A) RoHS : Compliant | 800 | |||
| NDSH20120C | onsemi | Silicon Carbide SiC Schottky Diode EliteSiC 20 A 1200 V D3 TO2472L SIC DIODE GEN20 1200V TO2472L (Alt: NDSH20120C) RoHS : Compliant | 450 | |||
| CA12012_LAURA-O-PIN | LEDIL | ASSEMBLY SQUARE 1 POS 216MM OD 131MM H (Alt: CA12012_LAURA-O-PIN) RoHS : Compliant | 180 | |||
STTH12012TV1![]() | STMicroelectronics | Fast Ultrafast Diode 12 KV 60 A Dual Isolated 225 V 50 ns 420 A ISOTOP (Alt: STTH12012TV1) RoHS : Compliant | 90 | |||
| FSV20120V | onsemi | 20 A 120 V UltraLow VF Schottky Rectifier (Alt: FSV20120V) RoHS : Compliant | 0 | |||
| PCFFS20120AF | onsemi | Silicon Carbide SiC Schottky Diode EliteSiC 20 A 1200 V D1 Die Silicon Carbide SiC Schottky Diode EliteSiC 20 A 1200 V D1 Die (Alt: PCFFS20120AF) RoHS : Compliant | 0 | |||
| MIC2012-1PZQS | Microchip Technology Inc | (Alt: MIC2012-1PZQS) RoHS : Compliant | 0 | |||
| V20120C-E3/4W | Vishay Intertechnologies | (Alt: V20120C-E3/4W) RoHS : Compliant | 0 | |||
| FFSH20120A-F085 | onsemi | Silicon Carbide SiC Schottky Diode EliteSiC 20A 1200V D1 TO2472L (Alt: FFSH20120A-F085) RoHS : Compliant | 0 | |||
| WNSC2M20120TB6J | WeEn Semiconductor Co Ltd | (Alt: WNSC2M20120TB6J) RoHS : Compliant | 0 | |||
| SA50-120-12S-A-H | Microchip Technology Inc | TOP ASSY SA5012012SAH (Alt: SA50-120-12S-A-H) RoHS : Not Compliant | 0 | |||
![]() ECCO | 10-824802-012 | Amphenol Industrial Operations |
| 1,327 | ||
| 075-0322-012 | ITT Interconnect Solutions |
| 1,015 | |||
![]() Neutron USA | 5008.2012 | Schurter Electronic Components | AC Power Entry Modules 2.5A 250VAC INLET FILTER RoHS : Compliant |
| 50 | |
| SQE48T20120-NDA0G | Bel Power Solutions | Isolated DC/DC Converters 240W 12V at 20A Bus Converter |
| 50 | ||
| OD7020-12HHB10A | Orion Fans | DC Fans Fan, 70x20mm, 12VDC 43CFM with PWM/Tach |
| 50 | ||
| TEN 20-1212 | Traco Power | Isolated DC/DC Converters |
| 50 | ||
| FN2020-12-07 | Schaffner | Power Line Filters GENERAL EMI 12A FILTER 1-PHASE RoHS : Compliant |
| 50 | ||
| 15520122701000 | HARTING Technology Group | Board to Board & Mezzanine Connectors har-flex power straight male, 3.25mm, 12pin, THR, PL1 RoHS : Compliant |
| 50 | ||
| 84-7201.200 | EAO AG | Industrial Panel Mount Indicators / Switch Indicators ALM RED OPAGUE LENS RoHS : Compliant |
| 50 | ||
| F20-120 | Triad Magnetics | Power Transformers 2.5VA 20V CT @ 0.12A Split Pack RoHS : Compliant |
| 39 | ||
| EL100D20-12 | Crydom Inc | Solid State Relay, Panel Mount, Load: 3-100VDC 20A, Control: 10-14VDC, Quick Connect - 0.250" |
| 20 | ||
| 09120123105 | HARTING Technology Group | Heavy Duty Power Connectors Han Q Hybrid female crimp insert (w/ data element) RoHS : Compliant |
| 10 | ||
| RM84-2012-35-5230 | Altech Corporation | Relay; Miniature; DPDT; 230VAC; 38 500 Ohm; IP67; 8A; 29 x 12.7 x 15.7 mm |
| 7 | ||
| PWM-120-12DA | Mean Well | LED Power Supply CV PWM Output 120W 12V 10A, DALI, PFC, Wire Leads, Input: 90 ~ 305VAC, 127 ~ 431VDC RoHS : Compliant |
| 1 | ||
| SDM120-12-UD-P5 | CUI Inc | Desktop AC Adapters ac-dc, 12 Vdc, 9.16 A, SW, C8 desk-top, P5 center pos, level VI, MED RoHS : Compliant |
| 0 | ||
| 1201280 | Phoenix Contact | DIN Rail, Unperforated, G Profile, 32x15x2kmm, Copper, NS 32 CU/120QMM UNPERF 2000MM RoHS : Compliant |
| 0 | ||
| 57MS22-01-2-08N | Grayhill Inc | SWITCH ROTARY 8POS 250MA 115V |
| 0 | ||
![]() Pasternack Enterprises US | PE3C6201-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 24 inches. Plenum N Male to N Female Bulkhead Low PIM Cable 24 Inch Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum N male to N female bulkhead low PIM cable 24 inch length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N male to N female bulkhead low PIM cable 24 inch length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-250-NM-LP type N to TC-SPP250-NF-BH-LP type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-250-NM-LP N type cable connection on one end and TC-SPP250-NF-BH-LP type N bulkhead cable connection on the other. Our low PIM TC-250-NM-LP N type to TC-SPP250-NF-BH-LP type N cable assemblies have a male gender on end 1 and female on end 2. This TC-250-NM-LP type N to TC-SPP250-NF-BH-LP type N cable is a male to female coax assembly, PE3C6201-24, can also be known as a low PIM TC-250-NM-LP N type plug to TC-SPP250-NF-BH-LP N type jack cable assembly and will be shipped same-day as it is purchased. TC-250-NM-LP type N plug to TC-SPP250-NF-BH-LP type N jack cable assembly PE3C6201-24 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-250-NM-LP N cable assembly is manufactured with TC-250-NM-LP type N to TC-SPP250-NF-BH-LP N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-250-NM-LP type N male to TC-SPP250-NF-BH-LP type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6201-24 can also be used in the other direction and will be TC-SPP250-NF-BH-LP N type female bulkhead to TC-250-NM-LP type N male cable assembly if the opposite connectivity is required. Low PIM TC-250-NM-LP type N plug to TC-SPP250-NF-BH-LP type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-250-NM-LP N type to TC-SPP250-NF-BH-LP N type cable assembly for quick shipment worldwide. Variations of TC-250-NM-LP type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N male to N female bulkhead low PIM cable 24 inch length using SPP-250-LLPL coax using Times Microwave parts. |
| 52 | |
| PE3C2012 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR401FLJ Low PIM, RF Cable Type: PE-SR401FLJ Low PIM, RF Cable Impedance: 50 Ohm. N Male to 7/16 DIN Male LSZH Jacketed Low PIM Cable Using SR401FLJ Low PIM Coax with HeatShrink, RoHS., Radio frequency assembly N male to 7/16 DIN male LSZH jacketed low PIM cable using SR401FLJ low PIM coax with heatshrink, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to 7/16 DIN male LSZH jacketed low PIM cable using SR401FLJ low PIM coax with heatshrink, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and 7/16 DIN cable connection on the other. Our low PIM N type to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This type N to 7/16 DIN cable is a male to male coax assembly, PE3C2012, can also be known as a low PIM N type plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. Type N plug to 7/16 DIN plug cable assembly PE3C2012 is built with PE-SR401FLJ low PIM which is a formable coax type. The Pasternack low passive intermodulation formable N cable assembly is manufactured with N type to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency low PIM type N male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2012 can also be used in the other direction and will be 7/16 DIN male to type N male cable assembly if the opposite connectivity is required. Low PIM N type plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to 7/16 DIN cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to 7/16 DIN male LSZH jacketed low PIM cable using SR401FLJ low PIM coax with heatshrink, RoHS. | 22 | |||
| PE3TC1201-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: PE-SF200LL75, RF Cable Type: PE-SF200LL75, RF Cable Impedance: 75 Ohm, Length: 24 inches. 75 Ohm N Male to 75 Ohm N Female Low Frequency Cable 24 Inch Length Using 75 Ohm PE-SF200LL75 Coax, RoHS., Radio frequency assembly 75 Ohm N male to 75 Ohm N female low frequency cable 24 inch length using 75 Ohm PE-SF200LL75 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. 75 Ohm N male to 75 Ohm N female low frequency cable 24 inch length using 75 Ohm PE-SF200LL75 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss type N to N type cable assemblies have a male gender on end 1 and female on end 2. This N type to type N cable is a male to female coax assembly, PE3TC1201-24, can also be known as a low loss type N plug to type N jack cable assembly and will be shipped same-day as it is purchased. Type N plug to N type jack cable assembly PE3TC1201-24 is built with PE-SF200LL75 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 75 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency type N male to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3TC1201-24 can also be used in the other direction and will be N type female to type N male cable assembly if the opposite connectivity is required. Low loss N type plug to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm N male to 75 Ohm N female low frequency cable 24 inch length using 75 Ohm PE-SF200LL75 coax, RoHS. |
| 16 | ||
| PE3TC1201-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: PE-SF200LL75, RF Cable Type: PE-SF200LL75, RF Cable Impedance: 75 Ohm, Length: 78.74 inches. 75 Ohm N Male to 75 Ohm N Female Low Frequency Cable 200 cm Length Using 75 Ohm PE-SF200LL75 Coax, RoHS., Radio frequency assembly 75 Ohm N male to 75 Ohm N female low frequency cable 200 cm length using 75 Ohm PE-SF200LL75 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. 75 Ohm N male to 75 Ohm N female low frequency cable 200 cm length using 75 Ohm PE-SF200LL75 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss N type to type N cable assemblies have a male gender on end 1 and female on end 2. This type N to type N cable is a male to female coax assembly, PE3TC1201-200CM, can also be known as a low loss N type plug to N type jack cable assembly and will be shipped same-day as it is purchased. Type N plug to type N jack cable assembly PE3TC1201-200CM is built with PE-SF200LL75 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 75 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency N type male to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3TC1201-200CM can also be used in the other direction and will be N type female to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm N male to 75 Ohm N female low frequency cable 200 cm length using 75 Ohm PE-SF200LL75 coax, RoHS. |
| 8 | ||
| PE80L2012 | Pasternack Enterprises | Key Specifications, Connector In Series: SMA, Connector In Gender: Female, Connector Out Series: SMA, Connector Out Gender: Female, Minimum Frequency: 50 MHz, Maximum Frequency: 21 GHz, Design Type: High Power, Peak Power: 10 Watt, Leakage (CW): 20.5 dBm. High Power Limiter, SMA, 10W Peak Power, 18 dBm Flat Leakage, 50 MHz to 21 GHz. The PE80L2012 radio frequency high power limiter from Pasternack is one of many radio frequency parts that are specifically stocked for quick shipment. Our radio frequency high power is designed with a SMA female to SMA female connector configuration. The Pasternack RF limiter is designed for high power and has a maximum peak power of 10 watts. Pasternack SMA to SMA limiter has a minimum frequency of 50 MHz and a maximum frequency of 21 GHz. This high-quality radio frequency limiter is constructed from aluminum and features a typical leakage power of 18 dBm and a maximum leakage power of 20.5 dBm. Additional radio frequency specs for this Pasternack component can be found in the downloadable datasheet PDF specifications. Our 10 Watt limiter operates in temperatures ranging from -40 to 85 degrees C. Typical input VSWR for this limiter is 1.6:1 and whereas the typical output VSWR is 1.8:1. Our PE80L2012 limiter supports a maximum average input power of 4 W. This high power limiter is 0.79 inches long, 0.71 inches wide, and 0.39 inches high. This Pasternack RF limiter will ship the same business day as purchased. Our coaxial high power SMA limiter is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF limiter as per your requirements. |
| 2 | ||
| PE3420-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male to SMA Male Right Angle Cable 12 Inch Length Using RG174 Coax., Radio frequency assembly SMA male to SMA male right angle cable 12 inch length using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male right angle cable 12 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3420-12, can also be known as a SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3420-12 is built with RG174 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency SMA male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3420-12 can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male right angle cable 12 inch length using RG174 coax. | 0 | |||
| PE3W22012 | Pasternack Enterprises | Key Specifications, Connector Series 1: HN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG303HV, RF Cable Type: RG303 Hi Voltage, RF Cable Impedance: 50 Ohm. HN Male to N Male Cable Using RG303HV Coax. PE3W22012 is a HN male to N male cable using RG303 Hi Voltage coax. This Pasternack HN male to N male cable assembly uses a 50 Ohm HN for connector 1 and a 50 Ohm N for connector 2. Our male HN to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W22012 HN male to N male cable assembly is constructed with RG303 Hi Voltage coax. | 0 | |||
| PE36201-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C195, RF Cable Type: PE-C195, RF Cable Impedance: 50 Ohm, Length: 24 inches. SMA Male to SMA Female Cable 24 Inch Length Using PE-C195 Coax., Radio frequency assembly SMA male to SMA female cable 24 inch length using PE-C195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to SMA female cable 24 inch length using PE-C195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE36201-24, can also be known as a low loss SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE36201-24 is built with PE-C195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE36201-24 can also be used in the other direction and will be SMA female to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female cable 24 inch length using PE-C195 coax. |
| 0 | ||
| PE3W20120 | Pasternack Enterprises | Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG196A/U, RF Cable Type: RG196, RF Cable Impedance: 50 Ohm. MMCX Plug to SMA Male Cable Using RG196 Coax. PE3W20120 is a MMCX plug to SMA male cable using RG196 coax. This Pasternack MMCX plug to SMA male cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm SMA for connector 2. Our plug MMCX to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20120 MMCX plug to SMA male cable assembly is constructed with RG196 coax. | 0 | |||
| PE3W12012/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: HN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm. HN Male to N Male Right Angle Cable Using RG214 Coax with HeatShrink. PE3W12012/HS is a HN male to N male right angle cable using RG214 coax. This Pasternack HN male to N male right angle cable assembly uses a 50 Ohm HN for connector 1 and a 50 Ohm N for connector 2. HN to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male HN to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W12012/HS HN male to N male right angle cable assembly is constructed with RG214 coax. | 0 | |||
| PE3W07820-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm TNC Male to 75 Ohm TNC Male Cable 12 Inch Length Using 75 Ohm RG179 Coax., Radio frequency assembly 75 Ohm TNC male to 75 Ohm TNC male cable 12 inch length using 75 Ohm RG179 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm TNC male to 75 Ohm TNC male cable 12 inch length using 75 Ohm RG179 coax, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and TNC cable connection on the other. Our TNC to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W07820-12 can also be known as a TNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3W07820-12 is built with RG179 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this TNC male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. TNC plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm TNC male to 75 Ohm TNC male cable 12 inch length using 75 Ohm RG179 coax. |
| 0 | ||
| PE3W20124 | Pasternack Enterprises | Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm. QMA Male to SMA Female Cable Using RG402 Coax. PE3W20124 is a QMA male to SMA female cable using RG402 coax. This Pasternack QMA male to SMA female cable assembly uses a 50 Ohm QMA for connector 1 and a 50 Ohm SMA for connector 2. Our male QMA to female SMA cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W20124 QMA male to SMA female cable assembly is constructed with RG402 coax. | 0 | |||
| PE3W20129 | Pasternack Enterprises | Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. QMA Male to SMA Male Cable Using PE-SR405FL Coax. PE3W20129 is a QMA male to SMA male cable using PE-SR405FL coax. This Pasternack QMA male to SMA male cable assembly uses a 50 Ohm QMA for connector 1 and a 50 Ohm SMA for connector 2. Our male QMA to male SMA cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W20129 QMA male to SMA male cable assembly is constructed with PE-SR405FL coax. | 0 | |||
| PE3W20128 | Pasternack Enterprises | Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm. QMA Male to SMA Male Cable Using RG402 Coax. PE3W20128 is a QMA male to SMA male cable using RG402 coax. This Pasternack QMA male to SMA male cable assembly uses a 50 Ohm QMA for connector 1 and a 50 Ohm SMA for connector 2. Our male QMA to male SMA cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W20128 QMA male to SMA male cable assembly is constructed with RG402 coax. | 0 | |||
| PE3W20121 | Pasternack Enterprises | Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. QMA Male to SMA Female Cable Using RG142 Coax. PE3W20121 is a QMA male to SMA female cable using RG142 coax. This Pasternack QMA male to SMA female cable assembly uses a 50 Ohm QMA for connector 1 and a 50 Ohm SMA for connector 2. Our male QMA to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20121 QMA male to SMA female cable assembly is constructed with RG142 coax. | 0 | |||
![]() Sager | 8862012012 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | ||
| TW-20-12-L-D-720-120 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| ATS012012012-SF-2K | Advanced Thermal Solutions Inc | STRAIGHT FIN EXTRUDED HEATSINK, BLACK, NO TIM / LENGTH 12MM X WIDTH 12MM X HEIGHT 12MM / FINISH BLACK ANODIZE RoHS : Compliant |
| 0 | ||
| 1.20.122.012/0000 | RAFI USA Inc | Switch Contact Blocks / Switch Kits RAFIX 16 Switch element Au 2NO |
| 0 | ||
| SPDL2012-201-2P-T | Signal Transformer Inc | Common Mode Chokes / Filters 2 Line SMD Common Mode Choke 200Ohm+/- 25% impedance@100MHz |
| 0 | ||
| 51BP22-01-2-08N | Grayhill Inc | Rotary Switches ElectricalSwitch Rotary NotOver5Amp RoHS : Compliant |
| 0 | ||
| 55A0141-22-0/1/2/9 | TE Connectivity | Multi-Conductor Cables 55A0141-22-0/1/2/9 PRICE PER FOOT | 0 | |||
| 5008.2012 | Schurter Electronic Components | AC Power Entry Modules 2.5A 250VAC INLET FILTER RoHS : Compliant |
| 0 | ||
| MCL2012V1-1R0-R | Eaton Bussmann | RF Inductors - SMD 1 UH 20% |
| 0 | ||
| MCL2012V1-5R6-R | Eaton Bussmann | RF Inductors - SMD 5.6 UH 20% |
| 0 | ||
| MCL2012V2-101-R | Eaton Bussmann | RF Inductors - SMD 100 NH 20% |
| 0 | ||
| MCL2012V2-390-R | Eaton Bussmann | RF Inductors - SMD 39 NH 20% |
| 0 | ||
| MCL2012V2-471-R | Eaton Bussmann | RF Inductors - SMD 470 NH 20% |
| 0 | ||
| MCLA2012V1-2R2-R | Eaton Bussmann | RF Inductors - SMD 2.2 UH 10% AEC-Q200 |
| 0 | ||
| MCLA2012V1-6R8-R | Eaton Bussmann | RF Inductors - SMD 6.8 UH 10% AEC-Q200 |
| 0 | ||
![]() TE Connectivity | T4132012041-000 | TE Connectivity | M12,FRONT MOUNT,MALE,A,4P,SOLDER WIRE Connector System: Wire-to-Panel Circular Connector Type: Circular Connector Plug Number of Positions: 4 Circular Connector Shell Size: 18 Sealable: Yes Wire-to-Panel Circular Connector Plug 4 18 | M12 Panel Mount Solder Cup | Part Number: T4132012041-000 | Internal Number: T4132012041-000 | TE Connectivity RoHS : Compliant |
| 1,034 | |
| 3627322520121K | TE Connectivity | 3627 322520 120UH 10% Inductance: 120 µH Current Rating (Max): 75 mA DC Resistance: 8 Ω Passive Component Tolerance: 10 % Shielded: No Power Inductor | 120 µH 75 mA 8 Ω 10 % | Part Number: 3627322520121K | Internal Number: 2-2176636-6 | TE Connectivity RoHS : Compliant |
| 1,000 | ||
| 201298-3 | TE Connectivity | FEMALE BLOCK 14 POS Number of Positions: 14 Connector & Housing Type: Receptacle Connector Product Type: Housing Termination Method to Wire & Cable: Crimp Connector System: Cable-to-Panel Cable-to-Cable Standard Rectangular Connector | 14 Receptacle Housing Crimp | Part Number: 201298-3 | Internal Number: 201298-3 | TE Connectivity RoHS : Compliant |
| 702 | ||
| D-602-0122 | TE Connectivity | D-602-0122 Contact Type: Pin Contact Size: Size 8 Compatible With Wire & Cable Type: Coaxial Pin Size 8 Coaxial | Solder Contacts For Mil-Spec And Shielded Applications | Part Number: D-602-0122 | Internal Number: 521680-000 | Alias Number: 9-1194099-3 | TE Connectivity RoHS : Compliant |
| 125 | ||
| T4142012081-000 | TE Connectivity | M12,FRONT MOUNT,MALE,A,8P,SOLDER PCB Connector System: Wire-to-Panel Circular Connector Type: Circular Connector Plug Number of Positions: 8 Circular Connector Shell Size: 18 Sealable: Yes Wire-to-Panel Circular Connector Plug 8 18 | M12 Panel Mount PCB | Part Number: T4142012081-000 | Internal Number: T4142012081-000 | TE Connectivity RoHS : Compliant |
| 93 | ||
| T4132012081-000 | TE Connectivity | M12,FRONT MOUNT,MALE, A,8P,SOLDER WIRE Connector System: Wire-to-Panel Circular Connector Type: Circular Connector Plug Number of Positions: 8 Circular Connector Shell Size: 18 Sealable: Yes Wire-to-Panel Circular Connector Plug 8 18 | M12 Panel Mount Solder Cup | Part Number: T4132012081-000 | Internal Number: T4132012081-000 | TE Connectivity RoHS : Compliant |
| 91 | ||
| D-602-0126 | TE Connectivity | D-602-0126 Contact Type: Pin Pin | Data Bus Connector | Part Number: D-602-0126 | Internal Number: 047703-000 | Alias Number: 4-1190366-0 | TE Connectivity RoHS : Compliant |
| 63 | ||
| T1449320121-000 | TE Connectivity | H32A-SGR-PG21 Hood & Base Connector Product Type: Hood Cable Entry Location: Side Hood Side | Rectangular Connector Hoods & Base | Part Number: T1449320121-000 | Internal Number: T1449320121-000 | TE Connectivity RoHS : Compliant |
| 36 | ||
| T1220320125-000 | TE Connectivity | H32B-TG-M25 Hood & Base Connector Product Type: Hood Cable Entry Location: Top & Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Hood Top & Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1220320125-000 | Internal Number: T1220320125-000 | TE Connectivity RoHS : Compliant |
| 24 | ||
| T1320320125-000 | TE Connectivity | H32B-TG-RO-M25 Hood & Base Connector Product Type: Hood Cable Entry Location: Top & Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Hood Top & Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1320320125-000 | Internal Number: T1320320125-000 | TE Connectivity RoHS : Compliant |
| 24 | ||
| T1320320129-000 | TE Connectivity | H32B-TG-RO-PG29 Hood & Base Connector Product Type: Hood Cable Entry Location: Top & Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Hood Top & Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1320320129-000 | Internal Number: T1320320129-000 | TE Connectivity RoHS : Compliant |
| 24 | ||
| T1320320121-000 | TE Connectivity | H32B-TG-RO-PG21 Hood & Base Connector Product Type: Hood Cable Entry Location: Top & Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Hood Top & Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1320320121-000 | Internal Number: T1320320121-000 | TE Connectivity RoHS : Compliant |
| 21 | ||
| T1210320125-000 | TE Connectivity | H32B-TS-M25 Hood & Base Connector Product Type: Hood Cable Entry Location: Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Hood Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1210320125-000 | Internal Number: T1210320125-000 | TE Connectivity RoHS : Compliant |
| 20 | ||
| B07D034BB2-0120 | TE Connectivity | B07D034BB2-0120 = M5757/23-010 Relay & Contactor Type: General Purpose Power Relay Current Type: DC Coil Magnetic System: Non-Polarized, Monostable Contact Arrangement: 2 Form C DPDT-CO Contact Current Rating: 10 A General Purpose Power Relay DC Non-Polarized, Monostable 2 Form C DPDT-CO | Electromechanical Relay | Part Number: B07D034BB2-0120 | Internal Number: 1617004-9 | TE Connectivity RoHS : Compliant |
| 19 | ||
| T1329320121-000 | TE Connectivity | H32A-TG-PG21 Hood & Base Connector Product Type: Hood Cable Entry Location: Top & Side Hood Top & Side | Rectangular Connector Hoods & Base | Part Number: T1329320121-000 | Internal Number: T1329320121-000 | TE Connectivity RoHS : Compliant |
| 13 | ||
![]() Teledyne HiRel | 5962-89582012A | Teledyne HiRel | BINARY COUNTER, 4-BIT SYNCHRONOUS, PRESETTABLE RoHS : Not Compliant | 0 | ||
| 5962-87612012A | Teledyne HiRel | NOR GATE, QUAD 2-INPUT RoHS : Not Compliant | 0 | |||
| 5962-86072012A | Teledyne HiRel | BINARY COUNTER, 4-BIT SYNCHRONOUS UP/DOWN RoHS : Not Compliant | 0 | |||
5962-90582012A![]() | Teledyne HiRel | BINARY COUNTER, 4-BIT SYNCHRONOUS UP/DOWN, PRESETTABLE RoHS : Not Compliant | 0 | |||
5962-88752012A![]() | Teledyne HiRel | HEX INVERTER, SCHMITT TRIGGER RoHS : Not Compliant | 0 | |||
| 5962-87552012A | Teledyne HiRel | BUFFER/DRIVER, OCTAL, NONINVERTING, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
5962-86872012A![]() | Teledyne HiRel | BUFFER/DRIVER, NAND, QUAD 2-INPUT, WITH OPEN-COLLECTOR OUTPUTS RoHS : Not Compliant | 0 | |||
| 5962-88702012A | Teledyne HiRel | FLIP-FLOP, D-TYPE, 8-BIT, WITH CLOCK ENABLE RoHS : Not Compliant | 0 | |||
| 5962-87692012A | Teledyne HiRel | DATA SEL/MULTIPLEXER, 8-INPUT, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
| 5962-89552012A | Teledyne HiRel | FLIP-FLOP, D-TYPE, 4-BIT, WITH MASTER RESET RoHS : Not Compliant | 0 | |||
| 5962-87622012A | Teledyne HiRel | DECODER/DEMULTIPLEXER, 3-TO-8-LINE RoHS : Not Compliant | 0 | |||
![]() Venkel Ltd. | CR0201-20W-104JT | VENKEL LTD | Chip Resistor;0201;1/20W;100K;�5% RoHS : Compliant | 105,000 | ||
| CR0201-20W-1820FT | VENKEL LTD | Chip Resistor;0201;1/20W;182R;�1% RoHS : Compliant | 21,000 | |||
| C1812X7R201-224KNE | VENKEL LTD | HV Chip Capacitor;1812;X7R;200V;0.22uF;�10% RoHS : Compliant | 2,000 | |||
| C0402C0G201-2R2CNP | VENKEL LTD | HV Chip Capacitor;0402;C0G;200V;2.2pF;�0.25pF RoHS : Compliant | 0 | |||
| C0402HQN201-220FNP | VENKEL LTD | High-Q NP0 Capacitor;0402;HQN;200V;22pF;�1% RoHS : Compliant | 0 | |||
| C0603C0G201-221GNP | VENKEL LTD | HV Chip Capacitor;0603;C0G;200V;220pF;�2% RoHS : Compliant | 0 | |||
| C0603X7R201-222KNP | VENKEL LTD | HV Chip Capacitor;0603;X7R;200V;2200pF;�10% RoHS : Compliant | 0 | |||
| C1206C0G201-272JNE | VENKEL LTD | HV Chip Capacitor;1206;C0G;200V;2700pF;�5% RoHS : Compliant | 0 | |||
| CR0201-20W-1000FT | VENKEL LTD | Chip Resistor;0201;1/20W;100R;�1% RoHS : Compliant | 0 | |||
| CR0201-20W-1244FT | VENKEL LTD | Chip Resistor;0201;1/20W;1.24M;�1% RoHS : Compliant | 0 | |||
| CR0201-20W-1370FT | VENKEL LTD | Chip Resistor;0201;1/20W;137R;�1% RoHS : Compliant | 0 | |||
| CR0201-20W-1R0JT | VENKEL LTD | Chip Resistor;0201;1/20W;1R;�5% RoHS : Compliant | 0 | |||
| CR0201-20W-2054FT | VENKEL LTD | Chip Resistor;0201;1/20W;2.05M;�1% RoHS : Compliant | 0 | |||
| CR0201-20W-20R5FT | VENKEL LTD | Chip Resistor;0201;1/20W;20.5R;�1% RoHS : Compliant | 0 | |||
| CR0201-20W-2261FT | VENKEL LTD | Chip Resistor;0201;1/20W;2.26K;�1% RoHS : Compliant | 0 | |||
![]() Vyrian | 5962-01-244-8530![]() | Analog Devices Inc | A/D Converter, 8-Bit, 1 Func, Bipolar, MDIP32 RoHS : Not Compliant | 11,144 | ||
5962-01-221-6728![]() | Analog Devices Inc | D/A Converter, 1 Func, CDIP16 RoHS : Not Compliant | 11,125 | |||
| 5962-01-247-1543 | Analog Devices Inc | Voltage Reference, 10V, BIPolar, MBCY3 RoHS : Not Compliant | 8,712 | |||
| 5962-01-201-2461 | Analog Devices Inc | Sample and Hold Circuit, 1 Func, Hybrid, MDIP24 RoHS : Not Compliant | 8,033 | |||
5962-01-201-2470![]() | Analog Devices Inc | D/A Converter, 1 Func, CDIP24 RoHS : Not Compliant | 7,452 | |||
| 5962-01-237-8943 | Texas Instruments | AND Gate, CMOS, PDIP14 RoHS : Not Compliant | 6,980 | |||
5962-01-206-7681![]() | Analog Devices Inc | Operational Amplifier, 1 Func, 11000uV Offset-Max, BIPolar, MBCY8 RoHS : Not Compliant | 6,771 | |||
| 5962-01-220-1283 | Texas Instruments | NOR Gate, TTL, PDIP14 RoHS : Not Compliant | 6,759 | |||
| 5962-01-265-8175 | Texas Instruments | Page Mode DRAM, 256KX1, 150ns, MOS, CDIP16 RoHS : Not Compliant | 6,109 | |||
5962-01-201-2469![]() | Analog Devices Inc | D/A Converter, 1 Func, CDIP18 RoHS : Not Compliant | 5,306 | |||
| 5962-01-201-2464 | Analog Devices Inc | Operational Amplifier, 2 Func, 3000uV Offset-Max, CDIP8 RoHS : Not Compliant | 4,991 | |||
| 5962-01-296-9402 | Analog Devices Inc | Operational Amplifier, 1 Func, 725uV Offset-Max, MBCY8 RoHS : Not Compliant | 4,924 | |||
| 5962-01-238-4513 | Texas Instruments | OTP ROM, 256X8, 70ns, TTL, CDIP20 RoHS : Not Compliant | 3,691 | |||
| 5962-01-273-6754 | Texas Instruments | OTP ROM, 256X8, 80ns, TTL, CDIP20 RoHS : Not Compliant | 3,520 | |||
| 2012 | Leach International Corporation | Snap Acting/Limit Switch, SPDT, Momentary, 5A, 30VDC, 8mm, Connector Terminal, Plunger Actuator, Panel Mount-threaded | 451 | |||
![]() Waytek, Inc. | AT62-201-20141 | Amphenol Sine Systems | ATM Female Nickel Socket Contact 22-20GA Size 20 Solid 634 0462-201-20141 Size Change |
| 16,355 | |
| 12020126 | Aptiv PLC | 16-14 GA Male Metri-Pack 630 Terminal 12020126 2000/Reel RoHS : Compliant |
| 4,000 | ||
| AT60-220-1231 | Amphenol Sine Systems | ATP/AHD-6 Male Gold Pin Contact 14-12 GA Size 12 Solid 0460-220-1231 |
| 3,558 | ||
| 39100-2012 | Molex | 18-10 GA Terminal Strip 10 MM EuroStyle 600V 12 Pole 30A REPLACED 47161 47153 |
| 2,535 | ||
| 12020125 | Aptiv PLC | 20-18 GA Male Metri-Pack 630 Terminal 12020125 2500/Reel |
| 2,500 | ||
| 12020126-L | Aptiv PLC | 16-14 GA Male Metri-Pack 630 Loose Piece Terminal 12020126-L |
| 1,735 | ||
| 6420120CLE4R3 | ShawCor Ltd | DSG-Canusa 6420120CLE4R3 clear adhesive-lined heat shrink tubing is tubing sized for splice sealing and environmental protection of inline electrical connections. Its adhesive-lined construction supports moisture resistance, abrasion protection, and durable insulation in harness repair applications. |
| 1,600 | ||
| 12020125-L | Aptiv PLC | 20-18 GA Male Metri-Pack 630 Loose Piece Terminal 12020125-L |
| 972 | ||
| 2012B | Egis Mobile Electric | 12 POS Sealed BusBar |
| 179 | ||
| 6420120CLE448 | ShawCor Ltd | DSG-Canusa SpliceMelt adhesive-lined heat shrink tubing is clear tubing sized 12 mm for sealing and protecting splices, terminals, and inline connections. Its adhesive-lined construction supports moisture resistance, abrasion protection, and durable environmental insulation. |
| 158 | ||
| 5201-2001 | Egis Mobile Electric | PT Series TDR - Power Tamer VS (5201) Repl w/o Adapter |
| 5 | ||
| HDBB-320-1-250 | 3M | 3M HDBB-320-1-250 heat shrinkable cable breakout boot is a 3-way molded heat shrink shape for multiconductor armored or sheathed cables. It provides electrical and mechanical protection, uses adhesive-sealed polyolefin construction, and has 1.20"/0.50" outlet dimensions for compact breakout sealing. |
| 3 | ||
![]() Win Source Electronics | GZ2012D601TF | Sunlord | RoHS : Compliant |
| 3,493,865 | |
| MPL2012S4R7MHT | Sunlord | RoHS : Compliant |
| 990,000 | ||
| MLZ2012N4R7LT000 | TDK Corporation | FIXED IND 4.7UH 600MA 180 MOHM RoHS : Compliant |
| 860,000 | ||
| MPZ2012S221AT000 | TDK Corporation | FERRITE BEAD 220 OHM 0805 1LN RoHS : Compliant |
| 130,000 | ||
| MLZ2012N100LT000 | TDK Corporation | FIXED IND 10UH 500MA 300 MOHM RoHS : Compliant |
| 125,420 | ||
| ACM2012-201-2P-T002 | TDK Corporation | CMC 350MA 2LN 200 OHM SMD RoHS : Compliant |
| 118,000 | ||
| C2012X5R1A476MTJ00E | TDK Corporation | Multilayer Ceramic Chip Capacitors |
| 86,008 | ||
| DFE252012P-R47M=P2 | Murata Manufacturing Co Ltd | FIXED IND 470NH 5.7A 27 MOHM SMD / Inductor Power Shielded Wirewound 0.47uH 20% 1MHz Metal 4A 0.027Ohm DCR 1008 T/R RoHS : Compliant |
| 68,500 | ||
| APHBM2012SURKCGKC | Kingbright | LED GREEN/RED CLEAR 0805 SMD RoHS : Compliant |
| 60,000 | ||
| APHBM2012CGKSYKC | Kingbright | 2.0x1.25mm SMD CHIP LED LAMP | LED GREEN/YELLOW CLEAR 2012 SMD RoHS : Compliant |
| 60,000 | ||
| C2012X5R1C226KT000E | TDK Corporation |
| 40,200 | |||
| MLZ2012N6R8LT000 | TDK Corporation | FIXED IND 6.8UH 550MA 250 MOHM RoHS : Compliant |
| 40,000 | ||
| DFE252012PD-1R5M=P2 | Murata Manufacturing Co Ltd | FIXED IND 1.5UH 2.6A 0.06OHM SMD RoHS : Compliant |
| 33,344 | ||
| MLP2012S4R7MT0S1 | TDK Corporation | FIXED IND 4.7UH 700MA 260 MOHM RoHS : Compliant |
| 14,306 | ||
| GLFR2012T100M-LR | TDK Corporation | FIXED IND 10UH 500MA 300 MOHM RoHS : Compliant |
| 5,500 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |