2015J8R2ABSTR50 Price, Distributor, Stock

These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit

E5-2-015-150

Southco

092520150T

Essentra Components

71230-02015

Avdel

LOCKNUT G2G3G4 TOOLS

5042122015301

Essentra Components

LINEAR HANDLE LATCH V2 D15 C30

Essentra Components

Essentra Components

Southco

Southco

Pop Rivets

PRH840-3400

060201530E

Essentra Components

12015171

Pop Rivets

PRH840-2500

0020150000VR

Essentra Components

0325020150FXM225

Essentra Components

HEX FLANGE BOLT, 14-20 THREAD,

26120201590E

Essentra Components

Flip Electronics

ICS8402015AKILF

Integrated Device Technology Inc

Stock

155,157

IDT8402015AKILF

Integrated Device Technology Inc

Stock

155,157

8402015AKILF

Integrated Device Technology Inc

Stock, Ship Today
RoHS : Compliant

1 : $2.1

155,157

R2A20152NS#W0

Renesas Electronics Corporation

Stock
RoHS : Compliant

10,000

LPC1112FHN33/201,5

NXP Semiconductors

Stock, Ship Today
RoHS : Compliant

1 : $1.9

9,600

LPC1113FHN33/201,5

NXP Semiconductors

Stock, Ship Today
RoHS : Compliant

1 : $2.24

4,940

HCPL-2201#500

Broadcom Limited

Stock
RoHS : Not Compliant

1,500

Pasternack Enterprises US

PE3W00020-150CM

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 59.06 inches. N Male Right Angle to TNC Male Right Angle Low Loss Cable 150 cm Length Using LMR-195 Coax., Radio frequency assembly N male right angle to TNC male right angle low loss cable 150 cm length using LMR-195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N male right angle to TNC male right angle low loss cable 150 cm length using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle type N cable connection on one end and right angle TNC cable connection on the other. Our low loss right angle N type to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. This type N to TNC cable is a male to male coax assembly, PE3W00020-150CM, can also be known as a low loss right angle N type plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to TNC plug cable assembly PE3W00020-150CM is built with LMR-195 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency N type right angle male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W00020-150CM can also be used in the other direction and will be right angle TNC male to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to TNC male right angle low loss cable 150 cm length using LMR-195 coax.

1 : $96.29
25 : $91.48
50 : $86.66
100 : $82.81

254

PE3FCA220-15M

Pasternack Enterprises

Key Specifications, Mode: Multimode, Multimode Class: OM4, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: UPC, Connector 2 Series: SC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNP, Cable Diameter: 4.5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. 4-Fiber SC UPC to SC UPC, OM4 Multimode Indoor Distribution Cable, 4.5mm Plenum, 2.0mm breakout, Aqua-15M. Pasternack’s PE3FCA220-15M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 15-meter long 4-fiber cable assembly is equipped with SC/UPC to SC/UPC connectors. Our aqua blue fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM4 fiber that supports 10Gb Ethernet up to 550 meters and 40G/100G Ethernet up to 150 meters and a bandwidth of 4700 MHz.km that delivers low attenuation and high-speed performance for mission-critical applications. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 4-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA220-15M fiber optic cable with a 4.5 mm cable diameter and 34 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of SC/UPC to SC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Our fiber optic breakout assembly is designed for hyperscale data centers and telecom backbones and ensures seamless network connectivity with minimal signal loss. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM4 multimode fiber optic cable that meets your requirements.

1 : $162.99
5 : $156.47
10 : $149.95
25 : $143.43

138

PE3C6220-150CM

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 59.0551 inches. Plenum 4.3-10 Male to N Female Low PIM Cable 150 cm Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum 4.3-10 male to N female low PIM cable 150 cm length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.3-10 male to N female low PIM cable 150 cm length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP N type cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-250-4310M-LP 4.3-10 cable connection on one end and TC-SPP250-NF-LP type N cable connection on the other. Our low PIM TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP type N cable assemblies have a male gender on end 1 and female on end 2. This TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP N type cable is a male to female coax assembly, PE3C6220-150CM, can also be known as a low PIM TC-250-4310M-LP 4.3-10 plug to TC-SPP250-NF-LP type N jack cable assembly and will be shipped same-day as it is purchased. TC-250-4310M-LP 4.3-10 plug to TC-SPP250-NF-LP type N jack cable assembly PE3C6220-150CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-250-4310M-LP 4.3-10 cable assembly is manufactured with TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-250-4310M-LP 4.3-10 male to TC-SPP250-NF-LP N type female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6220-150CM can also be used in the other direction and will be TC-SPP250-NF-LP type N female to TC-250-4310M-LP 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM TC-250-4310M-LP 4.3-10 plug to TC-SPP250-NF-LP type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP N type cable assembly for quick shipment worldwide. Variations of TC-250-4310M-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.3-10 male to N female low PIM cable 150 cm length using SPP-250-LLPL coax using Times Microwave parts.

1 : $151.99
25 : $144.39
50 : $136.79
100 : $130.71

PE3FCA320-15M

Pasternack Enterprises

Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 60 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: APC, Connector 2 Series: SC, Connector 2 Polish Type: APC, Jacket Burn Rating: OFNP, Cable Diameter: 5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. 6-Fiber SC APC to SC APC, OS2 Single Mode Distribution Cable, 5.0mm Plenum, 2.0mm breakout, Yellow-15M. Pasternack’s PE3FCA320-15M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 15-meter long 6-fiber cable assembly is equipped with SC/APC to SC/APC connectors. Our yellow fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly has a single mode OS2 fiber that offers ultra-low attenuation over distances up to 10km for 10G Ethernet and beyond with a 9/125µm core size. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA320-15M fiber optic cable with a 5 mm cable diameter and 37 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of SC/APC to SC/APC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. This OS2 fiber optic assembly is designed for enterprise backbones, long-haul networking, and high-speed data transmission and delivers exceptional reliability for critical infrastructure deployments. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements.

1 : $203.99
5 : $195.83
10 : $187.67
25 : $179.51

PE7620-15

Pasternack Enterprises

Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Max Freq: 18 GHz, Nominal Attenuation: 15 dB, Attenuation Accuracy, Typ: 0.8 dB, VSWR, Max: 1.3:1, Input Power, Max (CW): 2 Watts, Body Material: Stainless Steel, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 15 dB Fixed Attenuator SMA Male to SMA Female Passivated Stainless Steel Body Rated 2 Watt DC to 18 GHz. PE7620-15 is a 15 dB fixed attenuator from Pasternack. This 15 dB attenuator is an in-line, resistive PI attenuator pad design. Our in-series coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7620-15 in-series fixed attenuator is available with a typical attenuation accuracy of 0.8 dB. The max input power rating (CW) of this RF attenuator is 2 Watts. This attenuator has a maximum VSWR of 1.3:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with SMA connectors is constructed with stainless steel body material. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 15 dB fixed attenuator has a gold-plated brass inner conductor. This SMA attenuator has a male gender on side 1 and an SMA female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 15 dB. The Pasternack PE7620-15 attenuator is rated for maximum frequency up to 18 GHz. This fixed coaxial attenuator is suitable for instrumentation, precision measurements, prototyping and characterization and production systems applications. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7620-15 will ship the same business day as purchased from Pasternack’s production facility. This 15 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.

1 : $84.59
10 : $82.9
25 : $81.21
100 : $79.51

PE3W20152

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm. BNC Female Bulkhead to TNC Female Bulkhead Cable Using LMR-100A-UF Coax. PE3W20152 is a BNC female bulkhead to TNC female bulkhead cable using LMR-100A-UF coax. This Pasternack BNC female bulkhead to TNC female bulkhead cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm TNC for connector 2. Our female BNC bulkhead to female TNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20152 BNC female bulkhead to TNC female bulkhead cable assembly is constructed with LMR-100A-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W22015

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-141FL-NM, RF Cable Type: PE-141FL-NM, RF Cable Impedance: 50 Ohm. BNC Jack Bulkhead to SMA Male Cable Using PE-141FL-NM. PE3W22015 is a BNC jack bulkhead to SMA male cable using PE-141FL-NM coax. This Pasternack BNC jack bulkhead to SMA male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMA for connector 2. Our jack BNC bulkhead to male SMA cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W22015 BNC jack bulkhead to SMA male cable assembly is constructed with PE-141FL-NM coax.

PE7201-50

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 6 GHz, Impedance: 50 Ohm, Power Maximum: 100 Watt, VSWR Maximum: 1.45:1, Attenuation: 50 dB, Connector Series 1: 7/16 DIN, Connector Gender 1: Female, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Body Material: Black Anodized Aluminum Heatsink. 50 dB Fixed Attenuator, 7/16 DIN Female To 7/16 DIN Male Directional Black Anodized Aluminum Heatsink Body Rated To 100 Watts Up To 6 GHz. PE7201-50 is a fixed 50 dB attenuator from Pasternack. This 50dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 7/16 DIN attenuator has a female gender on side 1 and a 7/16 DIN male connector on side 2. The Pasternack PE7201-50 50 dB attenuator is rated for up to 6 GHz. Our microwave attenuator is rated to 100 Watts at the stated attenuation value. Our fixed RF attenuator PE7201-50 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 50dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $1,050.0
5 : $1,008.0
10 : $966.0

PE3W20155LF

Pasternack Enterprises

PE3W02015

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50. N Female Bulkhead to MMCX Plug Right Angle Cable Using PE-047SR Coax. PE3W02015 is a type N female bulkhead to MMCX plug right angle cable using PE-047SR coax. This Pasternack N type female bulkhead to MMCX plug right angle cable assembly uses a 50 Ohm type N for connector 1 and a 50 Ohm MMCX for connector 2. N type to MMCX right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female type N bulkhead to plug MMCX right angle cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W02015 type N female bulkhead to MMCX plug right angle cable assembly is constructed with PE-047SR coax.

PE3W20157LF

Pasternack Enterprises

Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.92mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm. 2.92mm Male Right Angle to 2.92mm Male Cable Using PE-047SR Coax, LF Solder. PE3W20157LF is a 2.92mm male right angle to 2.92mm male cable using PE-047SR coax. This Pasternack 2.92mm male right angle to 2.92mm male cable assembly uses a 50 Ohm 2.92mm for connector 1 and a 50 Ohm 2.92mm for connector 2. 2.92mm right angle to 2.92mm coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 2.92mm right angle to male 2.92mm cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W20157LF 2.92mm male right angle to 2.92mm male cable assembly is constructed with PE-047SR coax.

PE3W20159LF

Pasternack Enterprises

Key Specifications, Connector Series 1: SC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. SC Male to N Male Cable Using RG58 Coax, LF Solder. PE3W20159LF is a SC male to N male cable using RG58 coax. This Pasternack SC male to N male cable assembly uses a 50 Ohm SC for connector 1 and a 50 Ohm N for connector 2. Our male SC to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20159LF SC male to N male cable assembly is constructed with RG58 coax.

PE3W20154

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-FR, RF Cable Type: LMR-195-FR, RF Cable Impedance: 50 Ohm. N Male to SMA Female Cable Using LMR-195-FR Coax. PE3W20154 is a N male to SMA female cable using LMR-195-FR coax. This Pasternack N male to SMA female cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. Our male N to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20154 N male to SMA female cable assembly is constructed with LMR-195-FR coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C7820-150CM

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.1/9.5 Mini DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 59.06 inches. 4.1/9.5 Mini DIN Male to 4.1/9.5 Mini DIN Male Right Angle Low PIM Cable 150 Cm Length Using 1/4 inch Superflexible Coax., Radio frequency assembly 4.1/9.5 mini DIN male to 4.1/9.5 mini DIN male right angle low PIM cable 150 cm length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.1/9.5 mini DIN male to 4.1/9.5 mini DIN male right angle low PIM cable 150 cm length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to 4.1/9.5 mini DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and right angle 4.1/9.5 mini DIN cable connection on the other. Our low PIM 4.1/9.5 mini DIN to right angle 4.1/9.5 mini DIN cable assemblies have a male gender on end 1 and male on end 2. This 4.1/9.5 mini DIN to 4.1/9.5 mini DIN cable is a male to male coax assembly, PE3C7820-150CM, can also be known as a low PIM 4.1/9.5 mini DIN plug to right angle 4.1/9.5 mini DIN plug cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to 4.1/9.5 mini DIN plug cable assembly PE3C7820-150CM is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to right angle 4.1/9.5 mini DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM 4.1/9.5 mini DIN male to 4.1/9.5 mini DIN right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7820-150CM can also be used in the other direction and will be right angle 4.1/9.5 mini DIN male to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to 4.1/9.5 mini DIN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to 4.1/9.5 mini DIN cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.1/9.5 mini DIN male to 4.1/9.5 mini DIN male right angle low PIM cable 150 cm length using 1/4 inch superflexible coax.

1 : $141.99
25 : $134.89
50 : $127.79
100 : $122.11

PE3W22015LF

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-141FL-NM, RF Cable Type: PE-141FL-NM, RF Cable Impedance: 50 Ohm. SMA Male to BNC Jack Bulkhead Cable Using PE-141FL-NM, LF Solder. PE3W22015LF is a SMA male to BNC jack bulkhead cable using PE-141FL-NM coax. This Pasternack SMA male to BNC jack bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BNC for connector 2. Our male SMA to jack BNC bulkhead cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W22015LF SMA male to BNC jack bulkhead cable assembly is constructed with PE-141FL-NM coax.

Venkel Ltd.

C0402HQN201-5R1BNP

VENKEL LTD

High-Q NP0 Chip Capacitor;0402;HQN;200V;5.1pF;�0.1pF
RoHS : Compliant

10,000

C0402HQN201-5R4CNP

VENKEL LTD

High-Q NP0 Capacitor;0402;HQN;200V;5.4pF;�0.25pF
RoHS : Compliant

C0603HQN201-560FNP

VENKEL LTD

High-Q NP0 Chip Capacitor;0603;HQN;200V;56pF;�1%
RoHS : Compliant

C1210C0G201-561JNE

VENKEL LTD

HV Chip Capacitor;1210;C0G;200V;560pF;�5%
RoHS : Compliant

C0402C0G201-560KNP

VENKEL LTD

HV Chip Capacitor;0402;C0G;200V;56pF;�10%
RoHS : Compliant

C1210X7R201-562KNE

VENKEL LTD

HV Chip Capacitor;1210;X7R;200V;5600pF;�10%
RoHS : Compliant

C1825X7R201-564KNE

VENKEL LTD

HV Chip Capacitor;1825;X7R;200V;0.56uF;�10%
RoHS : Compliant

C0402HQN201-5R9DNP

VENKEL LTD

High-Q NP0 Capacitor;0402;HQN;200V;5.9pF;�0.5pF
RoHS : Compliant

C0603C0G201-561JNP

VENKEL LTD

HV Chip Capacitor;0603;C0G;200V;560pF;�5%
RoHS : Compliant

C0805C0G201-561GNE

VENKEL LTD

HV Chip Capacitor;0805;C0G;200V;560pF;�2%
RoHS : Compliant

C1206C0G201-560KNP

VENKEL LTD

HV Chip Capacitor;1206;C0G;200V;56pF;�10%
RoHS : Compliant

C1206C0G201-5R0CNP

VENKEL LTD

HV Chip Capacitor;1206;C0G;200V;5pF;�0.25pF
RoHS : Compliant

C0402HQN201-5R5CNP

VENKEL LTD

High-Q NP0 Capacitor;0402;HQN;200V;5.5pF;�0.25pF
RoHS : Compliant

C1111HQN201-5R0CNE

VENKEL LTD

High-Q NP0 Capacitor;1111;HQN;200V;5pF;�0.25pF
RoHS : Compliant

C1210C0G201-562JNE

VENKEL LTD

HV Chip Capacitor;1210;C0G;200V;5600pF;�5%
RoHS : Compliant

Vyrian

LRS20-15-901G

Bel Fuse

Power Supply Modules/Adaptors
RoHS : Compliant

15,927

LPC1113FHN33/201,5

NXP Semiconductors

RISC Microcontroller, 32-Bit, FLASH, CORTEX-M0 CPU, 50MHz, CMOS, PQCC33
RoHS : Compliant

11,272

LMP2015MFE

Texas Instruments

Operational Amplifier, 1 Func, 10uV Offset-Max, PDSO5

8,401

LPC1112FHN33/201,551

NXP Semiconductors

RISC Microcontroller

8,219

LMP2015MAX

Texas Instruments

Operational Amplifier, 1 Func, 10uV Offset-Max, PDSO8

8,166

LPC1114FHN33/201,5

NXP Semiconductors

RISC Microcontroller, 32-Bit, FLASH, CORTEX-M0 CPU, 50MHz, CMOS, PQCC33
RoHS : Compliant

7,553

LMP2015MF

Texas Instruments

Operational Amplifier, 1 Func, 10uV Offset-Max, PDSO5

6,907

LPC1111FHN33/201,551

NXP Semiconductors

RISC Microcontroller

6,445

LMP2015MFX

Texas Instruments

Operational Amplifier, 1 Func, 10uV Offset-Max, PDSO5

5,823

M28V420-150N1

STMicroelectronics

5,319

LMP2015MA

National Semiconductor Corporation

Operational Amplifier, 1 Func, 10uV Offset-Max, PDSO8
RoHS : Not Compliant

5,036

MT52C9020-15AT

Micron Technology Inc

FIFO, 2KX9, 15ns, Asynchronous, CMOS, PDIP28
RoHS : Not Compliant

4,786

LPC1111FHN33/201,5

NXP Semiconductors

RISC Microcontroller, 32-Bit, FLASH, CORTEX-M0 CPU, 50MHz, CMOS, PQCC33
RoHS : Compliant

4,704

MT52C9020-15

Micron Technology Inc

FIFO, 2KX9, 15ns, Asynchronous, CMOS, PDIP28
RoHS : Not Compliant

3,266

MT52C9020-15IT

Micron Technology Inc

FIFO, 2KX9, 15ns, Asynchronous, CMOS, PDIP28
RoHS : Not Compliant

2,964

Waytek, Inc.

T18L0M4 111-02015

HellermannTyton

HellermannTyton T18L0M44 standard cable tie is a self-locking nylon tie with a 8" length for general-purpose wire, cable, hose, and tubing bundling. Its one-piece construction supports reliable fastening, clean harness organization, and everyday use in electrical and equipment applications.

1,000 : $0.0527
5,000 : $0.0494

495,000

12015869

Aptiv PLC

20-18 GA Metri-Pack 630 Female 12015869 Terminal on Reel 2000/Reel

2,000 : $0.1288
10,000 : $0.1204

204,000

12015870-L

Aptiv PLC

Metri-Pack 630 Female 16-14 GA 12015870 LOOSE TERMINAL

25 : $0.2698
50 : $0.2592
100 : $0.2506
200 : $0.2381
500 : $0.2294
1,000 : $0.2218

121,483

12015792

Aptiv PLC

The Aptiv 12015792 is a sealed 2-way female Weather-Pack connector body designed for reliable wire-to-wire connections in harsh automotive environments. Supporting up to 20A, it uses crimp terminals and accommodates wire sizes from 2212 Ga. depending on terminal selection. Constructed from durable nylon with a locking design, it provides moisture- and contamination-resistant performance from -40C to 125C.
RoHS : Compliant

20 : $1.04
50 : $0.9184
100 : $0.816
200 : $0.7488
500 : $0.7072
1,000 : $0.6144

110,587

12015791

Aptiv PLC

Weather Pack FemaleTower Connector 1 Contact # 12015791
RoHS : Compliant

20 : $1.0083
50 : $0.9731
100 : $0.8637
200 : $0.8207
500 : $0.7933
1,000 : $0.7699

88,841

12015870

Aptiv PLC

Metri-Pack 630 Female 16-14 GA 12015870 Terminals on Reels
RoHS : Compliant

2,100 : $0.1365
10,500 : $0.1274

77,700

12015793

Aptiv PLC

Weather Pack Female Tower Connector 3 Contact # 12015793

20 : $1.198
50 : $1.0814
100 : $0.9889
200 : $0.9568
500 : $0.9286
1,000 : $0.8965

35,758

12015869-L

Aptiv PLC

METRI-PACK 630 FEMALE 20-18 GA 12015869 LOOSE TERMINAL

50 : $0.2495
200 : $0.241
500 : $0.2241
1,000 : $0.2148

18,139

12015799

Aptiv PLC

Weather Pack Female Tower Connector 6 Contact # 12015799

10 : $1.668
50 : $1.5045
100 : $1.3129
200 : $1.3129
500 : $1.2904
1,000 : $1.0829

13,380

12015797

Aptiv PLC

Weather Pack Female Tower Connector 4 Contact # 12015797

1 : $2.1108
10 : $1.9871
50 : $1.9046
100 : $1.5141
200 : $1.4647
500 : $1.4214

13,314

12015024

Aptiv PLC

Weather Pack Male Shroud Square Connector 4 Contact 12015024

20 : $0.6366
50 : $0.5733
100 : $0.5232
200 : $0.5058
500 : $0.4905
1,000 : $0.4731

9,532

12020156

Aptiv PLC

18-20 GA Terminal Reel Female 12020156 2000/Reel
RoHS : Compliant

2,000 : $0.1303
10,000 : $0.1217

6,000

12015798

Aptiv PLC

Weather Pack Female Tower Square Connector 4 Contact 12015798

10 : $1.4399
50 : $1.2918
100 : $1.0502
200 : $1.0502
500 : $1.0502
1,000 : $0.9191

1,602

4201500RD0048

ShawCor Ltd

DSG-Canusa CPX-100 polyolefin heat shrink tubing is red tubing with a 1-1/2" size for insulating and protecting wires, terminals, and splices. Its flexible polyolefin construction supports clean shrink coverage, abrasion protection, and dependable electrical insulation in harness applications.

1 : $13.34
10 : $11.52
50 : $10.46
100 : $9.55
500 : $9.04

4201500CK0048

ShawCor Ltd

DSG-Canusa CPX-100 polyolefin heat shrink tubing is clear tubing with a 1.500" size for insulating and protecting wires, terminals, and splices. Its flexible polyolefin construction supports clean shrink coverage, abrasion protection, and dependable electrical insulation in harness applications.

1 : $15.62
10 : $13.45
50 : $12.25
100 : $11.23
500 : $10.58

Wuhan P&S

STPS20150CFP

STMicroelectronics

150V,2x10A,Dual Schottky rectifier
RoHS : Compliant

1 : $0.65
100 : $0.57
500 : $0.55
1,000 : $0.49

6,000

2015J8R2ABSTR50 Distributor

Link URL