2040E3JB0 Price, Distributor, Stock

Key Specifications, Connector Series In: N, Connector Gender In: Female, Minimum Frequency: 2 GHz, Maximum Frequency: 4 GHz, Number of Output Ports: 4 Port, Impedance: 50 Ohm, Maximum Input Power: 30 Watt. 4 Way N Power Divider from 2 GHz to 4 GHz Rated at 30 Watts. PE2040 4 way type N power divider (also known as a type N coaxial power splitter) is rated for a minimum frequency of 2 GHz and a maximum frequency of 4 GHz. This Pasternack 4 port type N power divider / coaxial splitter has a 50 Ohm impedance and a maxium input power of 30 Watts. Our type N coaxial RF splitter / divider has a female N type input and 4 female type N output ports. This 4 way type N RF power divider from Pasternack is a reactive design and has a maximum insertion loss of 0. The maximum input VSWR of this N type reactive splitter / divider is 1.4:1 and the minimum isolation is 20 dB. Our 4 port type N power divider is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This reactive 4 way type N female coaxial RF power divider splitter can be bought and shipped worldwide the same-day as with Pasternack's other in-stock RF parts.

1 : $1,750.0
5 : $1,680.0
10 : $1,610.0

PE71S2040

Pasternack Enterprises

Key Specifications, Connector Series: SMA, Connector Gender: Female, Switch Design: Reflective, Minimum Frequency: 20 MHz, Maximum Frequency: 1 GHz, Impedance: 50 Ohm, Maximum Input Power: 150 Watts, Maximum Input VSWR: 1.4:1, Maximum Insertion Loss: 0.75 dB, Minimum Isolation: 40 dB. SPDT PIN Diode Switch Operating from 20 MHz to 1 GHz Up to 150 Watts (+51.8 dBm) and SMA. PE71S2040 PIN diode switch from Pasternack is a Reflective design. Our RF Reflective PIN diode switch uses SMA connectors at 50 Ohm. This SMA PIN diode Reflective switch has a minimum frequency of 20 MHz and a maximum frequency of 1 GHz. The Pasternack PIN diode Reflective RF switch is rated at a switching speed of 40,000 ns and a maximum input power of 150 Watts (+51.8 dBm ). Insertion loss maximum of this SMA Reflective switch is 0.75 dB with an isolation minimum of 40 dB. Reflective PIN diode radio frequency switch PE71S2040 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our Reflective SMA coaxial PIN diode switch can ship worldwide the same day that it is bought as with our other available RF parts.

1 : $2,840.0
5 : $2,726.4
10 : $2,612.8

PE3W20404

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PECX008, RF Cable Type: 141LL SR Tin Pl, RF Cable Impedance: 50 Ohm. N Female Bulkhead to TNC Male Right Angle Cable Using 141 Coax. PE3W20404 is a N female bulkhead to TNC male right angle cable using 141LL SR Tin Pl coax. This Pasternack N female bulkhead to TNC male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm TNC for connector 2. N to TNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female N bulkhead to male TNC right angle cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W20404 N female bulkhead to TNC male right angle cable assembly is constructed with 141LL SR Tin Pl coax.

PE3W20402LF

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. SMA Male to SSMC Plug Right Angle Cable Using RG405 Coax, LF Solder. PE3W20402LF is a SMA male to SSMC plug right angle cable using RG405 coax. This Pasternack SMA male to SSMC plug right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SSMC for connector 2. SMA to SSMC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA to plug SSMC right angle cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W20402LF SMA male to SSMC plug right angle cable assembly is constructed with RG405 coax.

PE3C2040

Pasternack Enterprises

PE3W12040

Pasternack Enterprises

Key Specifications, Connector Series 1: SSMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SSMB Plug to SMC Plug Cable Using LMR-100 Coax. PE3W12040 is a SSMB plug to SMC plug cable using LMR-100A coax. This Pasternack SSMB plug to SMC plug cable assembly uses a 50 Ohm SSMB for connector 1 and a 50 Ohm SMC for connector 2. Our plug SSMB to plug SMC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W12040 SSMB plug to SMC plug cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W20400/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: D-Subminiature, Connector 1 Gender: Receptacle, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. D-Sub Receptacle to MCX Plug Cable Using RG316 Coax with HeatShrink., Pasternack’s PE3W20400/HS D-Subminiature receptacle to MCX plug RF cable assembly using RG316 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The D-Subminiature receptacle to MCX plug cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom D-Subminiature to MCX cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a D-Subminiature cable connection on one end and a MCX cable connection on the other. Our D-Subminiature to MCX cable assembly has a receptacle gender on end 1 and a plug on end 2. PE3W20400/HS can also be known as a D-Subminiature receptacle to MCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. Our PE3W20400/HS RF cable has an FEP jacket of 0.102-inch diameter. The flexible RF cable has a between series connection. This PE3W20400/HS D-Subminiature receptacle to MCX male cable assembly is built with RG316, which is a flexible coax type. The Pasternack flexible D-Subminiature cable assembly is manufactured with D-Subminiature to MCX cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W20400/HS can also be used in the other direction and will be a MCX plug to D-Subminiature receptacle cable assembly if the opposite connectivity is required. This D-Subminiature receptacle to MCX male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality D-Subminiature to MCX cable assembly for quick shipment worldwide. Variations of D-Subminiature and MCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal D-Subminiature to MCX RF cable assembly as per your requirements.

PE3W20409

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. SMA Female 4 Hole Flange to SSMC Plug Right Angle Cable Using PE-SR405FL Coax. PE3W20409 is a SMA female 4 hole flange to SSMC plug right angle cable using PE-SR405FL coax. This Pasternack SMA female 4 hole flange to SSMC plug right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SSMC for connector 2. SMA to SSMC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMA 4 hole flange to plug SSMC right angle cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W20409 SMA female 4 hole flange to SSMC plug right angle cable assembly is constructed with PE-SR405FL coax.

PE3W20400/HS-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: D-Subminiature, Connector 1 Gender: Receptacle, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. D-Sub Receptacle to MCX Plug Cable 24 Inch Length Using RG316 Coax with HeatShrink., Pasternack’s PE3W20400/HS-24 D-Subminiature receptacle to MCX plug RF cable assembly using RG316 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The D-Subminiature receptacle to MCX plug cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom D-Subminiature to MCX cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a D-Subminiature cable connection on one end and a MCX cable connection on the other. Our D-Subminiature to MCX cable assembly has a receptacle gender on end 1 and a plug on end 2. PE3W20400/HS-24 can also be known as a D-Subminiature receptacle to MCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. Our PE3W20400/HS-24 RF cable has an FEP jacket of 0.102-inch diameter. The flexible RF cable has a between series connection. This PE3W20400/HS-24 D-Subminiature receptacle to MCX male cable assembly is built with RG316, which is a flexible coax type. The Pasternack flexible D-Subminiature cable assembly is manufactured with D-Subminiature to MCX cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications, and CAD drawings for this 24-inch-long RF cable are available on our downloadable PDF datasheet. PE3W20400/HS-24 can also be used in the other direction and will be a MCX plug to D-Subminiature receptacle cable assembly if the opposite connectivity is required. This D-Subminiature receptacle to MCX male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality D-Subminiature to MCX cable assembly for quick shipment worldwide. Variations of D-Subminiature and MCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal D-Subminiature to MCX RF cable assembly as per your requirements.

1 : $81.18
25 : $77.12
50 : $73.06
100 : $69.81

PE3W20405

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Male to Push-On SMP Female Right Angle Cable Using LMR-100A-UF Coax. PE3W20405 is a reverse polarity TNC male to SMP female right angle cable using LMR-100A-UF coax. This Pasternack reverse polarity TNC male to SMP female right angle cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMP for connector 2. TNC to SMP right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our reverse polarity male TNC to female SMP right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20405 TNC reverse polarity male to SMP female right angle cable assembly is constructed with LMR-100A-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W22040

Pasternack Enterprises

Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMBX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm. SMP Female Right Angle to Snap-On MMBX Plug Cable Using PE-SR405AL Coax. PE3W22040 is a SMP female right angle to MMBX plug cable using PE-SR405AL coax. This Pasternack SMP female right angle to MMBX plug cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm MMBX for connector 2. SMP right angle to MMBX coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMP right angle to plug MMBX cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W22040 SMP female right angle to MMBX plug cable assembly is constructed with PE-SR405AL coax.

PE3W20400/HS-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: D-Subminiature, Connector 1 Gender: Receptacle, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. D-Sub Receptacle to MCX Plug Cable 12 Inch Length Using RG316 Coax with HeatShrink., Pasternack’s PE3W20400/HS-12 D-Subminiature receptacle to MCX plug RF cable assembly using RG316 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The D-Subminiature receptacle to MCX plug cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom D-Subminiature to MCX cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a D-Subminiature cable connection on one end and a MCX cable connection on the other. Our D-Subminiature to MCX cable assembly has a receptacle gender on end 1 and a plug on end 2. PE3W20400/HS-12 can also be known as a D-Subminiature receptacle to MCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. Our PE3W20400/HS-12 RF cable has an FEP jacket of 0.102-inch diameter. The flexible RF cable has a between series connection. This PE3W20400/HS-12 D-Subminiature receptacle to MCX male cable assembly is built with RG316, which is a flexible coax type. The Pasternack flexible D-Subminiature cable assembly is manufactured with D-Subminiature to MCX cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications, and CAD drawings for this 12-inch-long RF cable are available on our downloadable PDF datasheet. PE3W20400/HS-12 can also be used in the other direction and will be a MCX plug to D-Subminiature receptacle cable assembly if the opposite connectivity is required. This D-Subminiature receptacle to MCX male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality D-Subminiature to MCX cable assembly for quick shipment worldwide. Variations of D-Subminiature and MCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal D-Subminiature to MCX RF cable assembly as per your requirements.

1 : $75.99
25 : $72.19
50 : $68.39
100 : $65.35

PE3W20400/HS-72

Pasternack Enterprises

Key Specifications, Connector 1 Series: D-Subminiature, Connector 1 Gender: Receptacle, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. D-Sub Receptacle to MCX Plug Cable 72 Inch Length Using RG316 Coax with HeatShrink., Pasternack’s PE3W20400/HS-72 D-Subminiature receptacle to MCX plug RF cable assembly using RG316 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The D-Subminiature receptacle to MCX plug cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom D-Subminiature to MCX cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a D-Subminiature cable connection on one end and a MCX cable connection on the other. Our D-Subminiature to MCX cable assembly has a receptacle gender on end 1 and a plug on end 2. PE3W20400/HS-72 can also be known as a D-Subminiature receptacle to MCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. Our PE3W20400/HS-72 RF cable has an FEP jacket of 0.102-inch diameter. The flexible RF cable has a between series connection. This PE3W20400/HS-72 D-Subminiature receptacle to MCX male cable assembly is built with RG316, which is a flexible coax type. The Pasternack flexible D-Subminiature cable assembly is manufactured with D-Subminiature to MCX cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications, and CAD drawings for this 72-inch-long RF cable are available on our downloadable PDF datasheet. PE3W20400/HS-72 can also be used in the other direction and will be a MCX plug to D-Subminiature receptacle cable assembly if the opposite connectivity is required. This D-Subminiature receptacle to MCX male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality D-Subminiature to MCX cable assembly for quick shipment worldwide. Variations of D-Subminiature and MCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal D-Subminiature to MCX RF cable assembly as per your requirements.

1 : $101.94
25 : $96.84
50 : $91.75
100 : $87.67

PE3W20408

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to SSMC Plug Right Angle Cable Using PE-SR405FL Coax. PE3W20408 is a SMA female bulkhead to SSMC plug right angle cable using PE-SR405FL coax. This Pasternack SMA female bulkhead to SSMC plug right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SSMC for connector 2. SMA to SSMC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMA bulkhead to plug SSMC right angle cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W20408 SMA female bulkhead to SSMC plug right angle cable assembly is constructed with PE-SR405FL coax.

PE3W20403/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SHV, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: C, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. SHV Jack to C Female Cable Using RG58 Coax with HeatShrink. PE3W20403/HS is a SHV jack to C female cable using RG58 coax. This Pasternack SHV jack to C female cable assembly uses a 50 Ohm SHV for connector 1 and a 50 Ohm C for connector 2. Our jack SHV to female C cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20403/HS SHV jack to C female cable assembly is constructed with RG58 coax.

TE Connectivity

2040974-2

TE Connectivity

PLUG HSG, 1.0VP REMODEL Number of Positions: 8 Connector & Housing Type: Housing for Male Terminals Connector Product Type: Housing Connector System: Wire-to-Board UL Flammability Rating: UL 94V-0 Standard Rectangular Connector | 8 Housing for Male Terminals Wire-to-Board | Part Number: 2040974-2 | Internal Number: 2040974-2 | TE Connectivity
RoHS : Compliant

10,000 : $0.21
5,000 : $0.21
2,500 : $0.22
1,000 : $0.22
500 : $0.23
250 : $0.23
100 : $0.23
50 : $0.24
25 : $0.24
10 : $0.25
1 : $0.25

15,900

2040015-2

TE Connectivity

DYNAMIC D4200 REC CONT S Contact Mating Area Plating Material: Gold (Au) Contact Type: Receptacle Wire Size: 20 – 16 AWG Operating Voltage: 600 VAC Operating Voltage: 600 VDC Gold (Au) Receptacle 20 – 16 AWG 600 VAC | Contact: Component To Wire 22-24A & 16-10 Wire Size | Part Number: 2040015-2 | Internal Number: 2040015-2 | TE Connectivity
RoHS : Compliant

25,000 : $1.29
10,000 : $1.31
5,000 : $1.34
2,500 : $1.37
1,000 : $1.39
500 : $1.42
250 : $1.44
100 : $1.47
50 : $1.5
25 : $1.52
10 : $1.55
1 : $1.58

6,282

RN212-0.4-02-39M

TE Connectivity

RN212-0.4-02-39M Operating Voltage (Max): 300 VDC Current Rating (Max): .4 A Input Termination Type: PCB Terminal Pollution Degree: PD2 Output Termination Type: PCB Terminal Emc / Rfi Chokes Rn Series | 300 VDC .4 A PCB Terminal PD2 | Part Number: RN212-0.4-02-39M | Internal Number: 815697-SF | TE Connectivity
RoHS : Compliant

10 : $3.49
1 : $3.89

505

2040594-4

TE Connectivity

SEAL CAP HSG 6P, AMPSEAL16 SEA Ampseal Header | Part Number: 2040594-4 | Internal Number: 2040594-4 | TE Connectivity
RoHS : Compliant

1 : $4.41

237

RN112-0.4-02-27M

TE Connectivity

RN112-0.4-02-27M Operating Voltage (Max): 300 VDC Current Rating (Max): .4 A Input Termination Type: PCB Terminal Pollution Degree: PD2 Output Termination Type: PCB Terminal Emc / Rfi Chokes Rn Series | 300 VDC .4 A PCB Terminal PD2 | Part Number: RN112-0.4-02-27M | Internal Number: 815693-SF | TE Connectivity
RoHS : Compliant

10 : $3.53
1 : $3.92

134

T2040001015-000

TE Connectivity

CMM-1.5 Contact Mating Area Plating Material: Silver (Ag) Contact Type: Pin Wire Contact Termination Area Plating Material: Silver Wire Size: 16 AWG Wire Size: 1.5 mm² Silver (Ag) Pin 16 AWG | Connector Contact | Part Number: T2040001015-000 | Internal Number: T2040001015-000 | TE Connectivity
RoHS : Compliant

50 : $2.99
25 : $3.16
10 : $3.34
1 : $3.52

119

T2040322201-000

TE Connectivity

HE-016-F 17-32 Contact Type: Socket Rectangular Connector Insert Type: Contact Insert Pole Configuration: 16 Wire Size: 14 – 20 AWG Wire Size: .5 – 2.5 mm² Socket Contact Insert 16 14 – 20 AWG | Rectangular Contact Insert | Part Number: T2040322201-000 | Internal Number: T2040322201-000 | TE Connectivity
RoHS : Compliant

50 : $22.22
25 : $23.52
10 : $24.83
1 : $26.14

T2030032040-000

TE Connectivity

HEF-4.0 Contact Mating Area Plating Material: Silver (Ag) Contact Type: Socket Wire Contact Termination Area Plating Material: Silver Wire Size: 12 AWG Contact Retention Within Housing: With Silver (Ag) Socket 12 AWG | Connector Contact | Part Number: T2030032040-000 | Internal Number: T2030032040-000 | TE Connectivity
RoHS : Compliant

50 : $10.99
25 : $11.64
10 : $12.28
1 : $12.93

T2030012040-000

TE Connectivity

DEF-4.0 Contact Mating Area Plating Material: Gold (Au) Contact Type: Socket Wire Contact Termination Area Plating Material: Gold Wire Size: 12 AWG Wire Size: 4 mm² Gold (Au) Socket 12 AWG | Connector Contact | Part Number: T2030012040-000 | Internal Number: T2030012040-000 | TE Connectivity
RoHS : Compliant

1,000 : $6.42
500 : $6.61
250 : $6.81
100 : $7.0
50 : $7.2
25 : $7.39
10 : $7.59
1 : $7.78

T2040001025-000

TE Connectivity

CMM-2.5 Contact Mating Area Plating Material: Silver (Ag) Contact Type: Pin Wire Contact Termination Area Plating Material: Silver Wire Size: 14 AWG Wire Size: 2.5 mm² Silver (Ag) Pin 14 AWG | Connector Contact | Part Number: T2040001025-000 | Internal Number: T2040001025-000 | TE Connectivity
RoHS : Compliant

1,000 : $2.83
500 : $2.91
250 : $3.0
100 : $3.08
50 : $3.17
25 : $3.25
10 : $3.34
1 : $3.43

T2040244201-000

TE Connectivity

HE-024-FC Contact Type: Socket Rectangular Connector Insert Type: Insert for Contacts Pole Configuration: 24+PE Wire Size: 26 – 12 AWG Wire Size: .14 – 4 mm² Socket Insert for Contacts 24+PE 26 – 12 AWG | Rectangular Contact Insert | Part Number: T2040244201-000 | Internal Number: T2040244201-000 | TE Connectivity
RoHS : Compliant

25 : $18.31
10 : $19.72
1 : $21.13

RN204-0.6-02-4M4

TE Connectivity

RN204-0.6-02-4M4 Operating Voltage (Max): 300 VDC Current Rating (Max): .6 A Input Termination Type: PCB Terminal Pollution Degree: PD2 Output Termination Type: PCB Terminal Emc / Rfi Chokes Rn Series | 300 VDC .6 A PCB Terminal PD2 | Part Number: RN204-0.6-02-4M4 | Internal Number: 815786-SF | TE Connectivity
RoHS : Compliant

25 : $4.72
10 : $5.09
1 : $5.45

T2040162201-000

TE Connectivity

HE-016-F Contact Type: Socket Rectangular Connector Insert Type: Contact Insert Pole Configuration: 16+PE Wire Size: 14 – 20 AWG Wire Size: .5 – 2.5 mm² Socket Contact Insert 16+PE 14 – 20 AWG | Rectangular Contact Insert | Part Number: T2040162201-000 | Internal Number: T2040162201-000 | TE Connectivity
RoHS : Compliant

25 : $22.95
10 : $24.72
1 : $26.48

204087-1

TE Connectivity

20 POS SHIELD ASSM. Connector Cover Type: Shield Kit Cable Exit Angle: 180 ° Primary Product Material: Carbon Steel Number of Positions: 20 Operating Temperature (Max): 150 °C Shield Kit 180 ° | Connector Cap & Cover | Part Number: 204087-1 | Internal Number: 204087-1 | Carbon Steel | TE Connectivity
RoHS : Compliant

100 : $475.15
50 : $497.78
25 : $520.41
10 : $543.03
1 : $565.66

T2040012040-000

TE Connectivity

DMF-4.0 Contact Mating Area Plating Material: Gold (Au) Contact Type: Socket Wire Contact Termination Area Plating Material: Gold Wire Size: 12 AWG Wire Size: 4 mm² Gold (Au) Socket 12 AWG | Connector Contact | Part Number: T2040012040-000 | Internal Number: T2040012040-000 | TE Connectivity
RoHS : Compliant

1,000 : $9.79
500 : $10.08
250 : $10.38
100 : $10.68
50 : $10.97
25 : $11.27
10 : $11.57
1 : $11.86

Venkel Ltd.

SS2040FL-EVL

VENKEL LTD

Rectifier;SOD-123F;40V;2A
RoHS : Not Compliant

UPTF0603-16W-N-2040UT-1K

VENKEL LTD

Ultra Precision Thin Film CR;0603;1/16W;�10PPM;204R;�0.01%
RoHS : Compliant

UPTF0603-16W-N-2040UT

VENKEL LTD

Ultra Precision Thin Film CR;0603;1/16W;�10PPM;204R;�0.01%
RoHS : Compliant

2040E3JB0 Distributor

Link URL