2044FAAG-R Price, Distributor, Stock

The swinghandle nests into the housing for minimal protrusion and pops up to swing smoothly for easy latch actuation. Robust die-cast zinc construction provides durable corrosion-resistant performance with optional gasketing for indoor or outdoor use.

H3-60-302-044

Southco

H3-60-322-044

Southco

020440A037B

Essentra Components

82 SLOTTED CSK SCREW, 4-40 THR

020440A118B

Essentra Components

440X1 316 SLT FLAT 82 BLK M111

020440B025

Essentra Components

034204411303

Essentra Components

4520-440-SS

RAF Electronic Hardware

020440A037

Essentra Components

82 SLOTTED CSK SCREW, 4-40 THR

020440A118

Essentra Components

82 SLOTTED CSK SCREW, 4-40 THR

H3-50-442-044

Southco

H3-60-142-044

Southco

020440A018B

Essentra Components

440X316 SL 82 FLAT HD BLK M111

EBV Elektronik

CBTU02044HEJ

NXP Semiconductors

HighSpeed TwoDifferential Channel 1to2 Switch 16Pin HUQFN TR (Alt: CBTU02044HEJ)
RoHS : Compliant

MIC2044-1YTS

Microchip Technology Inc

20 MOHM LOW VOLTAGE SWITCH (Alt: MIC2044-1YTS)
RoHS : Compliant

LS2044AXN7TTB

NXP Semiconductors

(Alt: LS2044AXN7TTB)
RoHS : Compliant

LS2044ASN7TTB

NXP Semiconductors

Network Processor 4 Cores 64bit 18 GHz FCPBGA 1292 Pins (Alt: LS2044ASN7TTB)
RoHS : Compliant

LS2044ASE7TTB

NXP Semiconductors

(Alt: LS2044ASE7TTB)
RoHS : Compliant

LS2044AXE711B

NXP Semiconductors

(Alt: LS2044AXE711B)
RoHS : Compliant

CY8CMBR2044-24LKXI

Infineon Technologies AG

(Alt: SP005653335)
RoHS : Compliant

RECE.20449.001E.01

Taoglas Antenna Solutions

STANDARD RECEPTACLE IPEX MHF4HSC COMP (Alt: RECE.20449.001E.01)
RoHS : Compliant

CY8CMBR2044-24LKXIT

Infineon Technologies AG

(Alt: SP005653337)
RoHS : Compliant

FJ8071505204404S RMRH

Intel Corporation

Microprocessor 12 Cores 64bit Core i5 18 GHz FCBGA 1744 Pins (Alt: 99CA5K)
RoHS : Compliant

FJ8071505204403S RMJK

Intel Corporation

Intel Core i51350PE Processor 12M Cache up to 460 GHz FCBGA16F Tray (Alt: 99C7JA)
RoHS : Compliant

ECCO

54020-44030LF

Amphenol FCi

RoHS : Compliant

25 : $1.58

Flip Electronics

CY8C20446A-24LQXI

Infineon Technologies AG

Stock, Ship Today
RoHS : Compliant

1 : $3.04

5,188

CY8C20446AS-24LQXI

Infineon Technologies AG

Stock, Ship Today

1 : $1.72

478

LS2044ASE7TTB

NXP Semiconductors

Stock
RoHS : Compliant

105

LS2044AXE711B

NXP Semiconductors

Stock
RoHS : Compliant

LS2044AXN711B

NXP Semiconductors

Stock
RoHS : Compliant

LS2044ASN7TTB

NXP Semiconductors

Stock
RoHS : Compliant

Maritex

4-520448-2

TE Connectivity

Quick Connect, Disconnect Terminals; 4-520448-2; TE CONNECTIVITY; Brass; Tin; Tin; Straight
RoHS : Compliant

30 : $0.29
10 : $0.357
1 : $0.5274

28,454

22122044

Molex

Female Socket Headers; 22122044; MOLEX; 1; 4 A; 4; 4

1,000 : $0.52
500 : $0.563
100 : $0.68
30 : $0.82
10 : $0.968
1 : $1.2866

7,367

5500.2044

Schurter Electronic Components

Power line filter modules; 5500.2044; 6 A; 100 �C; -25 �C; 250 V
RoHS : Compliant

100 : $19.279
50 : $19.785
20 : $20.201
10 : $20.412
1 : $25.7497

200

2204456-1

TE Connectivity

Custom Backplane Connectors; 2204456-1; TE CONNECTIVITY; 5; 24; Right Angle; 400 A
RoHS : Compliant

10 : $29.785
1 : $39.0818

4-520447-2

TE Connectivity

Quick Connect, Disconnect Terminals; 4-520447-2; TE CONNECTIVITY; Brass; Tin; Tin; 6.35 mm
RoHS : Compliant

1 : $0.1016

Neutron USA

1620440000

Weidmüller Interface GmbH & Co. KG

Pluggable Terminal Blocks BL 3.50/24/180 SN BK
RoHS : Compliant

1 : $49.99

21402020442010

HARTING Technology Group

Sensor Cables / Actuator Cables M12 A-COD 4-POL ST/ST M/M PUR
RoHS : Compliant

1 : $159.99

2044850000

Weidmüller Interface GmbH & Co. KG

Terminal Block Interface Modules ACT20P-CML-10-AO-RC-S

1 : $434.99

CAP-20/440R

Littelfuse Inc

Motor Start Capacitors & Motor Run Capacitors 20 MFD 370/440V ROUND CAP
RoHS : Unknown

1 : $64.99

2204440-2

TE Connectivity

MULTI-BEAM HD R/A PLUG 15S+8P+4P
RoHS : Compliant

1 : $161.64

2204422-2

TE Connectivity

MULTI-BEAM HD VER.REC.15S+4LP+6P+15S
RoHS : Compliant

1 : $103.21

2204443-1

TE Connectivity

Connector Plug, 2 Pos, Male Blades Board Edge, Through Hole, Right Angle Black Multi-Beam, Press Fit
RoHS : Compliant

1 : $90.55

4302044

WIKA Instrument LP

Pressure gauge;analog;100 psi;2";1/4" NPT;back mount;black plastic

1 : $39.99

2204452-1

TE Connectivity

MULTI-BEAM HD R/A PLUG 15S+6P+2LP+15S
RoHS : Compliant

1 : $59.85

2204442-2

TE Connectivity

MULTI-BEAM HDR/A PLUG 15S+4LP+6P
RoHS : Compliant

1 : $120.42

2204446-8

TE Connectivity

MULTI-BEAM HD R/A PLUG 4VP+20S
RoHS : Compliant

1 : $116.58

2204441-1

TE Connectivity

MULTI-BEAM HD R/APLUG 15S+2P+2LP+2P+15
RoHS : Compliant

1 : $100.72

2204403-1

TE Connectivity

Backplane Connector MULTI-BEAM HD R/A REC.2P
RoHS : Compliant

1 : $85.8

2204420-8

TE Connectivity

MULTI-BEAM HD VERTICAL REC. 15S+3P+12S
RoHS : Compliant

1 : $69.44

1204400000

Weidmüller Interface GmbH & Co. KG

Heavy Duty Power Connectors HDC HE 10 FC
RoHS : Compliant

1 : $59.67

Pasternack Enterprises US

PE3W09204-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: SHV, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SHV, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG8A/U, RF Cable Type: RG8, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SHV Jack Bulkhead to SHV Plug Cable 48 Inch Length Using RG8 Coax., Radio frequency assembly SHV jack bulkhead to SHV plug cable 48 inch length using RG8 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SHV jack bulkhead to SHV plug cable 48 inch length using RG8 coax, SHV cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SHV to SHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SHV bulkhead cable connection on one end and SHV cable connection on the other. Our SHV to SHV cable assemblies have a jack gender on end 1 and plug on end 2. PE3W09204-48 can also be known as a SHV female to SHV male cable assembly and will be shipped same-day as it is purchased. SHV female to SHV male cable assembly PE3W09204-48 is built with RG8 which is a flexible coax type. The Pasternack flexible SHV cable assembly is manufactured with SHV to SHV cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SHV jack bulkhead to SHV plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W09204-48 can also be used in the other direction and will be SHV plug to SHV jack bulkhead cable assembly if the opposite connectivity is required. SHV female bulkhead to SHV male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SHV to SHV cable assembly for quick shipment worldwide. Variations of SHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SHV jack bulkhead to SHV plug cable 48 inch length using RG8 coax.

1 : $282.99
25 : $268.84
50 : $254.69
100 : $243.37

PE3C6204-48

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 48 inches. Plenum N Male Right Angle to N Female Bulkhead Low PIM Cable 48 Inch Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum N male right angle to N female bulkhead low PIM cable 48 inch length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N male right angle to N female bulkhead low PIM cable 48 inch length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-NM-RA-LP type N to TC-SPP250-NF-BH-LP N type cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle TC-SPP250-NM-RA-LP type N cable connection on one end and TC-SPP250-NF-BH-LP N type bulkhead cable connection on the other. Our low PIM right angle TC-SPP250-NM-RA-LP type N to TC-SPP250-NF-BH-LP type N cable assemblies have a male gender on end 1 and female on end 2. This TC-SPP250-NM-RA-LP type N to TC-SPP250-NF-BH-LP N type cable is a male to female coax assembly, PE3C6204-48, can also be known as a low PIM right angle TC-SPP250-NM-RA-LP type N plug to TC-SPP250-NF-BH-LP type N jack cable assembly and will be shipped same-day as it is purchased. TC-SPP250-NM-RA-LP type N plug to TC-SPP250-NF-BH-LP N type jack cable assembly PE3C6204-48 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-NM-RA-LP N cable assembly is manufactured with right angle TC-SPP250-NM-RA-LP type N to TC-SPP250-NF-BH-LP type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-NM-RA-LP N type right angle male to TC-SPP250-NF-BH-LP type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6204-48 can also be used in the other direction and will be TC-SPP250-NF-BH-LP N type female bulkhead to right angle TC-SPP250-NM-RA-LP type N male cable assembly if the opposite connectivity is required. Low PIM TC-SPP250-NM-RA-LP type N right angle plug to TC-SPP250-NF-BH-LP N type jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-NM-RA-LP type N to TC-SPP250-NF-BH-LP type N cable assembly for quick shipment worldwide. Variations of TC-SPP250-NM-RA-LP N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N male right angle to N female bulkhead low PIM cable 48 inch length using SPP-250-LLPL coax using Times Microwave parts.

1 : $130.99
25 : $124.44
50 : $117.89
100 : $112.65

PE34204-48

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-020SR, RF Cable Type: PE-020SR, RF Cable Impedance: 50 Ohm, Length: 48 inches. SMA Male to SMA Male Right Angle Cable 48 Inch Length Using PE-020SR Coax., Radio frequency assembly SMA male to SMA male right angle cable 48 inch length using PE-020SR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male right angle cable 48 inch length using PE-020SR coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE34204-48, can also be known as a SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE34204-48 is built with PE-020SR which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34204-48 can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male right angle cable 48 inch length using PE-020SR coax.

1 : $306.99
25 : $291.64
50 : $276.29

PE3W12044/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. Smooth Bore SMP Male Bulkhead to 2.92mm Male Cable Using RG405 Coax with HeatShrink., Radio frequency assembly smooth bore SMP male bulkhead to 2.92mm male cable using RG405 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Smooth bore SMP male bulkhead to 2.92mm male cable using RG405 coax with heatshrink, SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to 2.92mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMP bulkhead cable connection on one end and 2.92mm cable connection on the other. Our SMP to 2.92mm cable assemblies have a male gender on end 1 and male on end 2. PE3W12044/HS can also be known as a SMP plug to 2.92mm plug cable assembly and will be shipped same-day as it is purchased. SMP plug to 2.92mm plug cable assembly PE3W12044/HS is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with SMP to 2.92mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMP male bulkhead to 2.92mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W12044/HS can also be used in the other direction and will be 2.92mm male to SMP male bulkhead cable assembly if the opposite connectivity is required. SMP plug bulkhead to 2.92mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to 2.92mm cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this smooth bore SMP male bulkhead to 2.92mm male cable using RG405 coax with heatshrink.

PE3W20449

Pasternack Enterprises

Key Specifications, Connector Series 1: LC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: HN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG217/U, RF Cable Type: RG217, RF Cable Impedance: 50 Ohm. LC Male to HN Male Right Angle Cable Using RG217 Coax. PE3W20449 is a LC male to HN male right angle cable using RG217 coax. This Pasternack LC male to HN male right angle cable assembly uses a 50 Ohm LC for connector 1 and a 50 Ohm HN for connector 2. LC to HN right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male LC to male HN right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20449 LC male to HN male right angle cable assembly is constructed with RG217 coax.

PE3W20448

Pasternack Enterprises

Key Specifications, Connector Series 1: NMO Mount, Connector Gender 1: Sexless, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm. NMO Mount Sexless to 7/16 DIN Male Right Angle Cable Using RG141 Coax. PE3W20448 is a NMO Mount sexless to 7/16 DIN male right angle cable using RG141 coax. This Pasternack NMO Mount sexless to 7/16 DIN male right angle cable assembly uses a 50 Ohm NMO Mount for connector 1 and a 50 Ohm 7/16 DIN for connector 2. NMO Mount to 7/16 DIN right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our sexless NMO Mount to male 7/16 DIN right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20448 NMO Mount sexless to 7/16 DIN male right angle cable assembly is constructed with RG141 coax.

PE3W02044

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG8X, RF Cable Type: RG8X, RF Cable Impedance: 50 Ohm. BNC Male to BNC Female Cable Using RG8X Coax. PE3W02044 is a BNC male to BNC female cable using RG8X coax. This Pasternack BNC male to BNC female cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. Our male BNC to female BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02044 BNC male to BNC female cable assembly is constructed with RG8X coax.

PE3W20440

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174NM, RF Cable Type: RG174 Non-Magnetic, RF Cable Impedance: 50 Ohm. SMA Female 4 Hole Flange to SMA Male Cable Using RG174 Non-Magnetic Coax. PE3W20440 is a SMA female 4 hole flange to SMA male cable using RG174 Non-Magnetic coax. This Pasternack SMA female 4 hole flange to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our female SMA 4 hole flange to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20440 SMA female 4 hole flange to SMA male cable assembly is constructed with RG174 Non-Magnetic coax.

PE3W20446

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm. 75 Ohm BNC Male to 50 Ohm TNC Male Cable Using 75 Ohm RG59 Coax. PE3W20446 is a BNC male to TNC male cable using RG59 coax. This Pasternack BNC male to TNC male cable assembly uses a 75 Ohm BNC for connector 1 and a 50 Ohm TNC for connector 2. Our male BNC to male TNC cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE3W20446 BNC male to TNC male cable assembly is constructed with RG59 coax.

PE3W22044

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. SMA Female to Push-On SMP Female Cable Using RG178 Coax. PE3W22044 is a SMA female to SMP female cable using RG178 coax. This Pasternack SMA female to SMP female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMP for connector 2. Our female SMA to female SMP cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W22044 SMA female to SMP female cable assembly is constructed with RG178 coax.

PE3W12044

Pasternack Enterprises

Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. 2.92mm Male to Smooth Bore SMP Male Bulkhead Cable Using RG405 Coax. PE3W12044 is a 2.92mm male to SMP male bulkhead cable using RG405 coax. This Pasternack 2.92mm male to SMP male bulkhead cable assembly uses a 50 Ohm 2.92mm for connector 1 and a 50 Ohm SMP for connector 2. Our male 2.92mm to male SMP bulkhead cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W12044 2.92mm male to SMP male bulkhead cable assembly is constructed with RG405 coax.

PE3W20447

Pasternack Enterprises

PE3W12044/HS-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Smooth Bore SMP Male Bulkhead to 2.92mm Male Cable 12 Inch Length Using RG405 Coax with HeatShrink., Radio frequency assembly smooth bore SMP male bulkhead to 2.92mm male cable 12 inch length using RG405 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Smooth bore SMP male bulkhead to 2.92mm male cable 12 inch length using RG405 coax with heatshrink, SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to 2.92mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMP bulkhead cable connection on one end and 2.92mm cable connection on the other. Our SMP to 2.92mm cable assemblies have a male gender on end 1 and male on end 2. PE3W12044/HS-12 can also be known as a SMP plug to 2.92mm plug cable assembly and will be shipped same-day as it is purchased. SMP plug to 2.92mm plug cable assembly PE3W12044/HS-12 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with SMP to 2.92mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMP male bulkhead to 2.92mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W12044/HS-12 can also be used in the other direction and will be 2.92mm male to SMP male bulkhead cable assembly if the opposite connectivity is required. SMP plug bulkhead to 2.92mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to 2.92mm cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this smooth bore SMP male bulkhead to 2.92mm male cable 12 inch length using RG405 coax with heatshrink.

1 : $280.99
25 : $266.94
50 : $252.89
100 : $241.65

PE3W12044/HS-6

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. Smooth Bore SMP Male Bulkhead to 2.92mm Male Cable 6 Inch Length Using RG405 Coax with HeatShrink., Radio frequency assembly smooth bore SMP male bulkhead to 2.92mm male cable 6 inch length using RG405 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Smooth bore SMP male bulkhead to 2.92mm male cable 6 inch length using RG405 coax with heatshrink, SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to 2.92mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMP bulkhead cable connection on one end and 2.92mm cable connection on the other. Our SMP to 2.92mm cable assemblies have a male gender on end 1 and male on end 2. PE3W12044/HS-6 can also be known as a SMP plug to 2.92mm plug cable assembly and will be shipped same-day as it is purchased. SMP plug to 2.92mm plug cable assembly PE3W12044/HS-6 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with SMP to 2.92mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMP male bulkhead to 2.92mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W12044/HS-6 can also be used in the other direction and will be 2.92mm male to SMP male bulkhead cable assembly if the opposite connectivity is required. SMP plug bulkhead to 2.92mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to 2.92mm cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this smooth bore SMP male bulkhead to 2.92mm male cable 6 inch length using RG405 coax with heatshrink.

1 : $271.99
25 : $258.39
50 : $244.79
100 : $233.91

PE3W20444

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm. TNC Female Bulkhead to Reverse Polarity TNC Male Cable Using RG400 Coax. PE3W20444 is a TNC female bulkhead to reverse polarity TNC male cable using RG400 coax. This Pasternack TNC female bulkhead to reverse polarity TNC male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our female TNC bulkhead to reverse polarity male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20444 TNC female bulkhead to TNC reverse polarity male cable assembly is constructed with RG400 coax.

Vyrian

MAX20444BATG/VY+

Analog Devices Inc

LED Driver
RoHS : Compliant

12,062

MAX20444CATG/VY+T

Analog Devices Inc

LED Driver
RoHS : Compliant

11,293

2204422-2

TE Connectivity

Rectangular Power Connector, 40 Contact(s), Female, Press Fit Terminal, Receptacle
RoHS : Compliant

11,040

MAX20446BEVKIT