2066TAG-R Price, Distributor, Stock

These robust latching solutions for doors and panels of heavy-duty equipment and vehicles combine rotary-action security with push-to-close convenience. Their compact design provides concealed operation while tolerating misalignment on closing engaging

090632062TEG

Essentra Components

SLOTTED THUMB SCREW, 6-32 THRE

2060-256-SS-20

RAF Electronic Hardware

20604011

Essentra Components

50MMX50MM 3MMWT SQUARE INSERT

2060403842001

Essentra Components

COMPRESSION LATCH WITH INDICAT

2062-440-AL-6

RAF Electronic Hardware

2064-440-A-22

RAF Electronic Hardware

47-81-206-55

Southco

Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications.

74202-02063

Avdel

O RING

RT-120-60-60

Essentra Components

E3-1010-0206

Southco

E3-1010-0206

E3-102-061

Southco

The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic

E3-110-206

Southco

E3-110-206

E5-2-065-130

Southco

These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit

ECCO

97-3102A-20(639)(0850)

Amphenol Industrial Operations

5 : $10.83

782

97-3102A-20(639)(0850)

Amphenol Industrial Operations

5 : $10.83

782

97-3106A-20(639)(0850)

Amphenol Industrial Operations

5 : $24.44

435

97-3106A-20(639)(0850)

Amphenol Industrial Operations

5 : $24.44

435

A34206

Amphenol PCD

25 : $3.75

387

MS34206

Amphenol PCD

25 : $3.75

387

C10-690206-001

Amphenol Industrial Operations

3 : $11.39

300

97-3107A-20(639)(0850)

Amphenol Industrial Operations

1 : $29.11

97-3057-20(621)

Amphenol Industrial Operations

5 : $13.71

97-3057-20(621)

Amphenol Industrial Operations

5 : $13.71

97-3057-20(639)

Amphenol Industrial Operations

5 : $16.69

97-3057-20(639)

Amphenol Industrial Operations

5 : $16.69

1-206062-6

TE Connectivity

RoHS : Compliant

5 : $8.12

97-3057-1020(676)

Amphenol Industrial Operations

5 : $13.91

97-3057-1020(676)

Amphenol Industrial Operations

5 : $13.91

Maritex

RC1206JR-07100RL

YAGEO Corporation

Chip Resistor; SMD; 1206; 100R; 5%; 1/4W
RoHS : Compliant

50,000 : $0.003
25,000 : $0.003
15,000 : $0.003
5,000 : $0.004
1,000 : $0.004
200 : $0.006
100 : $0.008
50 : $0.011
10 : $0.021
1 : $0.035

132,192

RC1206JR-0712KL

YAGEO Corporation

Chip Resistor; SMD; 1206; 12K; 5%; 1/4W
RoHS : Compliant

10,000 : $0.004
5,000 : $0.004
2,500 : $0.005
1,000 : $0.005
500 : $0.006
350 : $0.006
100 : $0.008
10 : $0.011
1 : $0.074

34,400

RC1206JR-07270RL

YAGEO Corporation

Chip Resistor; SMD; 1206; 270R; 5%; 1/4W
RoHS : Compliant

10,000 : $0.004
5,000 : $0.004
2,500 : $0.004
1,000 : $0.005
500 : $0.006
100 : $0.008
1 : $0.017

16,089

RC1206FR-07270RL

YAGEO Corporation

Chip Resistor; SMD; 1206; 270R; 1%; 1/4W
RoHS : Compliant

50,000 : $0.003
25,000 : $0.003
15,000 : $0.003
10,000 : $0.003
5,000 : $0.004
1,000 : $0.004
500 : $0.005
100 : $0.008
10 : $0.017
1 : $0.071

14,720

RC1206JR-0775RL

YAGEO Corporation

Chip Resistor; SMD; 1206; 75R; 5%; 1/4W
RoHS : Compliant

2,500 : $0.004
1,000 : $0.004
500 : $0.006
100 : $0.011
50 : $0.016
10 : $0.038
1 : $0.085

10,600

RC1206FR-072K2L

YAGEO Corporation

Chip Resistor; SMD; 1206; 2K2; 1%; 1/4W
RoHS : Compliant

50,000 : $0.004
25,000 : $0.004
15,000 : $0.004
10,000 : $0.004
5,000 : $0.004
1,000 : $0.006
250 : $0.009
100 : $0.012
10 : $0.021
1 : $0.058

10,365

RMC 1206 1/4W, , T/R, 620K

Royal Electronic Factory (Thailand) Co Ltd

Chip Resistor; SMD; 1206; 620K; 5%; 1/4W

5,000 : $0.011
1,000 : $0.019
1 : $0.054

9,380

CRCW120618R0FKTABC

Vishay Intertechnologies

Resistor; thick film; SMD; 1206; 18Ohm; 1%; 0.25W; -55+125 deg.C
RoHS : Compliant

10,000 : $0.006
5,000 : $0.006
1,000 : $0.009
500 : $0.013
100 : $0.022
1 : $0.084

7,740

RMC 1206 1/4W, , T/R, 9M1

RDA Microelectronics

Chip Resistor; SMD; 1206; 9M1; 5%; 1/4W

20,000 : $0.01
5,000 : $0.011
1,000 : $0.019
1 : $0.054

6,761

RC1206FR-07634KL

YAGEO Corporation

Resistor; Thick Film; 1206; 634K; 1%; 1/4W
RoHS : Compliant

10,000 : $0.003
5,000 : $0.003
100 : $0.011
1 : $0.045

5,000

RC1206JR-071K1L

YAGEO Corporation

Chip Resistor; SMD; 1206; 1K; 1; 5%; 1/4W
RoHS : Compliant

15,000 : $0.003
10,000 : $0.003
5,000 : $0.004
100 : $0.011
1 : $0.038

4,000

RC1206FR-0722KL

YAGEO Corporation

Chip Resistor; SMD; 1206; 22K; 1%; 1/4W
RoHS : Compliant

10,000 : $0.004
5,000 : $0.004
1,000 : $0.006
500 : $0.007
100 : $0.011
10 : $0.02
1 : $0.033

2,390

RC1206FR-07220KL

YAGEO Corporation

Chip Resistor; SMD; 1206; 220K; 1%; 1/4W
RoHS : Compliant

5,000 : $0.005
2,500 : $0.005
1,000 : $0.007
500 : $0.008
100 : $0.011
10 : $0.02
1 : $0.056

215

RC1206FR-073K32L

YAGEO Corporation

Chip Resistor; SMD; 1206; 3K32; 1%; 1/4W
RoHS : Compliant

1,000 : $0.006
500 : $0.006
100 : $0.008
10 : $0.01
1 : $0.079

206-1206

WAGO Innovative Connections

tension spring; small; for 206-1204 and 206-1216

1,000 : $8.602
500 : $8.913
250 : $9.315
100 : $9.958
50 : $10.644
25 : $11.456
10 : $12.911
1 : $18.3272

Pasternack Enterprises US

PE3C5206

Pasternack Enterprises

Key Specifications, Connector Series 1: SMP, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: Trimmed Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. Smooth Bore SMP Male Bulkhead to Trimmed Lead Cable Using RG405 Coax., Radio frequency assembly smooth bore SMP male bulkhead to trimmed lead cable using RG405 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Smooth bore SMP male bulkhead to trimmed lead cable using RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to Trimmed Lead cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMP bulkhead cable connection on one end and Trimmed Lead cable connection on the other. Our SMP to Trimmed Lead cable assemblies have a male gender on end 1 and sexless on end 2. This SMP to Trimmed Lead cable is a male to sexless coax assembly, PE3C5206, can also be known as a SMP plug to Trimmed Lead sexless cable assembly and will be shipped same-day as it is purchased. SMP plug to Trimmed Lead sexless cable assembly PE3C5206 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with SMP to Trimmed Lead cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMP male bulkhead to Trimmed Lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5206 can also be used in the other direction and will be Trimmed Lead sexless to SMP male bulkhead cable assembly if the opposite connectivity is required. SMP plug bulkhead to Trimmed Lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to Trimmed Lead cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this smooth bore SMP male bulkhead to trimmed lead cable using RG405 coax.

PE3W20645

Pasternack Enterprises

Key Specifications, Connector Series 1: SHV, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG303/U, RF Cable Type: RG303, RF Cable Impedance: 50 Ohm. SHV Jack to N Male Cable Using RG303 Coax. PE3W20645 is a SHV jack to N male cable using RG303 coax. This Pasternack SHV jack to N male cable assembly uses a 50 Ohm SHV for connector 1 and a 50 Ohm N for connector 2. Our jack SHV to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20645 SHV jack to N male cable assembly is constructed with RG303 coax.

PE3W20654/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm. BNC Female Bulkhead to BNC Male Cable Using LMR-195-UF Coax with HeatShrink. PE3W20654/HS is a BNC female bulkhead to BNC male cable using LMR-195-UF coax. This Pasternack BNC female bulkhead to BNC male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. Our female BNC bulkhead to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20654/HS BNC female bulkhead to BNC male cable assembly is constructed with LMR-195-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W20690

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C195, RF Cable Type: PE-C195, RF Cable Impedance: 50 Ohm. N Male to TNC Male Right Angle Cable Using PE-C195 Coax. PE3W20690 is a N male to TNC male right angle cable using PE-C195 coax. This Pasternack N male to TNC male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm TNC for connector 2. N to TNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N to male TNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20690 N male to TNC male right angle cable assembly is constructed with PE-C195 coax.

PE3C4920-6

Pasternack Enterprises

Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length: 6 inches. Snap-On BMA Jack to BNC Male Cable 6 Inch Length Using PE-SR402FLJ Coax., Radio frequency assembly snap-on BMA jack to BNC male cable 6 inch length using PE-SR402FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Snap-on BMA jack to BNC male cable 6 inch length using PE-SR402FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA cable connection on one end and BNC cable connection on the other. Our BMA to BNC cable assemblies have a jack gender on end 1 and male on end 2. This BMA to BNC cable is a jack to male coax assembly, PE3C4920-6, can also be known as a BMA female to BNC plug cable assembly and will be shipped same-day as it is purchased. BMA female to BNC plug cable assembly PE3C4920-6 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable BMA cable assembly is manufactured with BMA to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 4 GHz maximum frequency BMA jack to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4920-6 can also be used in the other direction and will be BNC male to BMA jack cable assembly if the opposite connectivity is required. BMA female to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to BNC cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this snap-on BMA jack to BNC male cable 6 inch length using PE-SR402FLJ coax.

1 : $228.99
25 : $217.54
50 : $206.09

PE3W02068LF

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50 Ohm. N Male to TNC Male Cable Using LMR-600 Coax, LF Solder. PE3W02068LF is a N male to TNC male cable using LMR-600 coax. This Pasternack N male to TNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm TNC for connector 2. Our male N to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02068LF N male to TNC male cable assembly is constructed with LMR-600 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W06206LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm. MMCX Plug Right Angle to SMA Female Bulkhead Cable Using RG188 Coax with HeatShrink, LF Solder. PE3W06206LF/HS is a MMCX plug right angle to SMA female bulkhead cable using RG188 coax. This Pasternack MMCX plug right angle to SMA female bulkhead cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm SMA for connector 2. MMCX right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MMCX right angle to female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W06206LF/HS MMCX plug right angle to SMA female bulkhead cable assembly is constructed with RG188 coax.

PE3W11206

Pasternack Enterprises

Key Specifications, Connector Series 1: D-Sub, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm.

PE3W12061

Pasternack Enterprises

Key Specifications, Connector Series 1: 10-32, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG196A/U, RF Cable Type: RG196, RF Cable Impedance: 50 Ohm. 10-32 Female to BNC Female Cable Using RG196 Coax. PE3W12061 is a 10-32 female to BNC female cable using RG196 coax. This Pasternack 10-32 female to BNC female cable assembly uses a 50 Ohm 10-32 for connector 1 and a 50 Ohm BNC for connector 2. Our female 10-32 to female BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W12061 10-32 female to BNC female cable assembly is constructed with RG196 coax.

PE3W20611

Pasternack Enterprises

Key Specifications, Connector Series 1: SHV, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Banana, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: RG55B/U, RF Cable Type: RG55, RF Cable Impedance: 53 Ohm. SHV Plug to Banana Plug Cable Using 53 Ohm RG55 Coax. PE3W20611 is a SHV plug to Banana plug cable using RG55 coax. This Pasternack SHV plug to Banana plug cable assembly uses a 50 Ohm SHV for connector 1 and a Banana for connector 2. Our plug SHV to plug Banana cable assembly uses a flexible cable type that is 53 Ohm. Pasternack PE3W20611 SHV plug to Banana plug cable assembly is constructed with RG55 coax.

PE3W20648

Pasternack Enterprises

Key Specifications, Connector Series 1: Mini SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm. Mini SMP Female to SMA Female Bulkhead Cable Using PE-P047 Coax. PE3W20648 is a Mini SMP female to SMA female bulkhead cable using PE-P047 coax. This Pasternack Mini SMP female to SMA female bulkhead cable assembly uses a 50 Ohm Mini SMP for connector 1 and a 50 Ohm SMA for connector 2. Our female Mini SMP to female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20648 Mini SMP female to SMA female bulkhead cable assembly is constructed with PE-P047 coax.

PE3W20666/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Cable Using LMR-195-UF Coax with HeatShrink. PE3W20666/HS is a SMA male to SMA male cable using LMR-195-UF coax. This Pasternack SMA male to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20666/HS SMA male to SMA male cable assembly is constructed with LMR-195-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W20693

Pasternack Enterprises

Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. 2.92mm Male to SMA Male Cable Using PE-P086HF Coax. PE3W20693 is a 2.92mm male to SMA male cable using PE-P086HF coax. This Pasternack 2.92mm male to SMA male cable assembly uses a 50 Ohm 2.92mm for connector 1 and a 50 Ohm SMA for connector 2. Our male 2.92mm to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20693 2.92mm male to SMA male cable assembly is constructed with PE-P086HF coax.

PE3C11206

Pasternack Enterprises

PE3C2062/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-DB, RF Cable Type: LMR-400-DB, RF Cable Impedance: 50 Ohm. TNC Male to TNC Male Cable Using LMR-400-DB Coax with HeatShrink. PE3C2062/HS is a TNC male to TNC male cable using LMR-400-DB coax. This Pasternack TNC male to TNC male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our male TNC to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C2062/HS TNC male to TNC male cable assembly is constructed with LMR-400-DB coax, * LMR™ is a trademark of Times Microwave Systems.