220BCNUMNFZCWC Price, Distributor, Stock

IEC C14 power entry module with 2-pole fuseholder; screw mount; 4.8x0.8mm quick connect terminals; internally wired; IP40; 10A/250VAC
RoHS : Compliant

250 : $5.482
100 : $5.761
50 : $5.971
10 : $6.452
1 : $7.1188

100

01220083Z

Littelfuse Inc

Fuse Holders & Clips; 01220083Z; LITTELFUSE; 250 V; PCB; 10.67 mm; 30 A
RoHS : Compliant

1,000 : $0.3293
1 : $0.4535

2002-2207

WAGO Innovative Connections

Installation terminal block; 2-level; through; 4-contacts for wire 0.25-4.0mm2 (22-12AWG); spring-loaded; green-yellow; for DIN rail;
RoHS : Compliant

1,000 : $8.309
500 : $8.596
250 : $8.971
100 : $9.614
50 : $10.255
25 : $11.008
10 : $12.294
1 : $17.0724

CLF6045T-220M-D

TDK Corporation

SMD Inductors; CLF6045T-220M-D; TDK; 22 �H; 100 kHz; 93.6 m?; 5.9 mm

10 : $0.065
1 : $0.203

GC220A12-R7B

Mean Well

Charger for rechargeable batteries; 183.6W; 13.6V; 13.5A; 90-264VAC; 120-370VDC

20 : $63.0
10 : $64.9
5 : $67.9
1 : $71.299

1-2208709-1

TE Connectivity

Other Rectangular Connectors; 1-2208709-1; TE CONNECTIVITY; 91; 5; No; 82.95 mm
RoHS : Compliant

500 : $6.098
100 : $6.99
10 : $8.915
1 : $11.613

Pasternack Enterprises US

PE3C2220-48

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-200-UF, RF Cable Type: LMR-200-UF, RF Cable Impedance: 50 Ohm, Length: 48 inches. BNC Male to BNC Male Cable 48 Inch Length Using LMR-200-UF Coax., Radio frequency assembly BNC male to BNC male cable 48 inch length using LMR-200-UF coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. BNC male to BNC male cable 48 inch length using LMR-200-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our low loss BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C2220-48, can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3C2220-48 is built with LMR-200-UF which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 4 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 48 inch length using LMR-200-UF coax.

1 : $81.39
25 : $77.32
50 : $73.25
100 : $70.0

215

PE3M0062-200CM

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/128-RG400-27478, RF Cable Type: M17/128-RG400, RF Cable Impedance: 50 Ohm, Length: 78.7402 inches. MIL-DTL-17 BNC Male to SMA Male Right Angle Cable 200 cm Length Using M17/128-RG400 Coax., Radio frequency assembly MIL-DTL-17 BNC male to SMA male right angle cable 200 cm length using M17/128-RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 BNC male to SMA male right angle cable 200 cm length using M17/128-RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/16-0014 BNC to M39012/56-3109 SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/16-0014 BNC cable connection on one end and right angle M39012/56-3109 SMA cable connection on the other. Our M39012/16-0014 BNC to right angle M39012/56-3109 SMA cable assemblies have a male gender on end 1 and male on end 2. This M39012/16-0014 BNC to M39012/56-3109 SMA cable is a male to male coax assembly, PE3M0062-200CM, can also be known as a MIL-DTL-17/MIL-C-17 M39012/16-0014 BNC plug to right angle M39012/56-3109 SMA plug cable assembly and will be shipped same-day as it is purchased. M39012/16-0014 BNC plug to M39012/56-3109 SMA plug cable assembly PE3M0062-200CM is built with M17/128-RG400 which is a flexible coax type. The Pasternack flexible M39012/16-0014 BNC cable assembly is manufactured with M39012/16-0014 BNC to right angle M39012/56-3109 SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MIL-C-17 4 GHz maximum frequency M39012/16-0014 BNC male to M39012/56-3109 SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0062-200CM can also be used in the other direction and will be right angle M39012/56-3109 SMA male to M39012/16-0014 BNC male cable assembly if the opposite connectivity is required. M39012/16-0014 BNC plug to M39012/56-3109 SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/16-0014 BNC to M39012/56-3109 SMA cable assembly for quick shipment worldwide. Variations of M39012/16-0014 BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 BNC male to SMA male right angle cable 200 cm length using M17/128-RG400 coax.

1 : $393.99
25 : $374.29
50 : $354.59

PE2200-30

Pasternack Enterprises

Key Specifications, Directionality: Directional, Connector Series: SMA, Connector Gender: Female, Design: Coupler, Minimum Frequency: 500 MHz, Maximum Frequency: 1,000 MHz, Maximum Input Power: 50 Watt, Coupling Value: 30 dB. Directional 30 dB SMA Coupler From 500 MHz to 1,000 MHz Rated To 50 Watts. RF coupler part number PE2200-30 from Pasternack is one of over 40,000 RF components available for same day shipping worldwide. This RF coupler is directional and is manufactured with SMA ports. Our directional coupler design uses SMA ports that are female gender and 50 Ohm impedance. The Pasternack directional coupler design is rated for a minimum frequency of 500 MHz and a maximum frequency of 1,000 MHz. Directional coupler part # PE2200-30 is constructed with a coupling value of 30 dB and a coupler directivity of 25 dB. This female SMA directional coupler is built with a maximum insertion loss of 0.2 dB and a maximum input power of 50 watts. Our directional coupler design with SMA connector is rated for a maximum insertion loss of 0.2 dB and a maximum VSWR of 1.1. Additional female SMA coupler specs for this RF component can be found on its radio frequency directional coupler PDF specifications datasheet above. PE2200-30 directional 30 dB SMA coupler is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack and it can be bought and then shipped worldwide the same-day as with Pasternack's other in-stock RF parts.

1 : $316.99
10 : $304.31
25 : $291.63

PE3C6222-200CM

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 78.7402 inches. Plenum 4.3-10 Male Right Angle to N Male Low PIM Cable 200 cm Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum 4.3-10 male right angle to N male low PIM cable 200 cm length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.3-10 male right angle to N male low PIM cable 200 cm length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-250-4310M-RA-LP 4.3-10 to TC-250-NM-LP type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle TC-250-4310M-RA-LP 4.3-10 cable connection on one end and TC-250-NM-LP type N cable connection on the other. Our low PIM right angle TC-250-4310M-RA-LP 4.3-10 to TC-250-NM-LP N type cable assemblies have a male gender on end 1 and male on end 2. This TC-250-4310M-RA-LP 4.3-10 to TC-250-NM-LP N type cable is a male to male coax assembly, PE3C6222-200CM, can also be known as a low PIM right angle TC-250-4310M-RA-LP 4.3-10 plug to TC-250-NM-LP type N plug cable assembly and will be shipped same-day as it is purchased. TC-250-4310M-RA-LP 4.3-10 plug to TC-250-NM-LP type N plug cable assembly PE3C6222-200CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-250-4310M-RA-LP 4.3-10 cable assembly is manufactured with right angle TC-250-4310M-RA-LP 4.3-10 to TC-250-NM-LP N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-250-4310M-RA-LP 4.3-10 right angle male to TC-250-NM-LP type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6222-200CM can also be used in the other direction and will be TC-250-NM-LP type N male to right angle TC-250-4310M-RA-LP 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM TC-250-4310M-RA-LP 4.3-10 right angle plug to TC-250-NM-LP type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-250-4310M-RA-LP 4.3-10 to TC-250-NM-LP type N cable assembly for quick shipment worldwide. Variations of TC-250-4310M-RA-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.3-10 male right angle to N male low PIM cable 200 cm length using SPP-250-LLPL coax using Times Microwave parts.

1 : $175.99
25 : $167.19
50 : $158.39
100 : $151.35

PE3W21220/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. Mini SMP Female Right Angle to SMA Female Bulkhead Cable Using PE-P086HF Coax with HeatShrink., Pasternack’s PE3W21220/HS right angle mini SMP female to SMA female bulkhead RF cable assembly using PE-P086HF coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to SMA female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle mini SMP cable connection on one end and an SMA bulkhead cable connection on the other. Our mini SMP to SMA cable assembly has a female gender on end 1 and a female on end 2. PE3W21220/HS can also be known as a right angle mini SMP jack to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.52 inches, allowing for a single bend without damaging the cable. Our PE3W21220/HS RF cable has an FEP jacket of 0.104-inch diameter. The flexible RF cable has a between series connection. Our right angle mini SMP female to bulkhead SMA female cable has a maximum VSWR of 1.4:1. This PE3W21220/HS mini SMP jack to SMA jack cable assembly is built with PE-P086HF, which is a flexible coax type. The Pasternack flexible mini SMP cable assembly is manufactured with right angle mini SMP to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder attachment method and a brass body with gold plating, while the other has the solder/solder attachment method and a brass body with gold over nickel plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W21220/HS can also be used in the other direction and will be an SMA female bulkhead to right angle mini SMP female cable assembly if the opposite connectivity is required. This mini SMP right angle jack to SMA jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMA cable assembly for quick shipment worldwide. Variations of mini SMP and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to SMA RF cable assembly as per your requirements.

PE2202-20

Pasternack Enterprises

Key Specifications, Directionality: Directional, Connector Series: SMA, Connector Gender: Female, Design: Coupler, Minimum Frequency: 2 GHz, Maximum Frequency: 4 GHz, Maximum Input Power: 50 Watt, Coupling Value: 20 dB. Directional 20 dB SMA Coupler From 2 GHz to 4 GHz Rated To 50 Watts. RF coupler part number PE2202-20 from Pasternack is one of over 40,000 RF components available for same day shipping worldwide. This RF coupler is directional and is manufactured with SMA ports. Our directional coupler design uses SMA ports that are female gender and 50 Ohm impedance. The Pasternack directional coupler design is rated for a minimum frequency of 2 GHz and a maximum frequency of 4 GHz. Directional coupler part # PE2202-20 is constructed with a coupling value of 20 dB and a coupler directivity of 22 dB. This female SMA directional coupler is built with a maximum insertion loss of 0.2 dB and a maximum input power of 50 watts. Our directional coupler design with SMA connector is rated for a maximum insertion loss of 0.2 dB and a maximum VSWR of 1.15. Additional female SMA coupler specs for this RF component can be found on its radio frequency directional coupler PDF specifications datasheet above. PE2202-20 directional 20 dB SMA coupler is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack and it can be bought and then shipped worldwide the same-day as with Pasternack's other in-stock RF parts.

1 : $470.99
10 : $452.15
25 : $433.31

PE3C5872-200CM

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 78.7402 inches. Plenum 4.1/9.5 Mini DIN Male to QMA Male Right Angle Low PIM Cable 200 cm Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum 4.1/9.5 mini DIN male to QMA male right angle low PIM cable 200 cm length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.1/9.5 mini DIN male to QMA male right angle low PIM cable 200 cm length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to QMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and right angle QMA cable connection on the other. Our low PIM 4.1/9.5 mini DIN to right angle QMA cable assemblies have a male gender on end 1 and male on end 2. This 4.1/9.5 mini DIN to QMA cable is a male to male coax assembly, PE3C5872-200CM, can also be known as a low PIM 4.1/9.5 mini DIN plug to right angle QMA plug cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to QMA plug cable assembly PE3C5872-200CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to right angle QMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.1/9.5 mini DIN male to QMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5872-200CM can also be used in the other direction and will be right angle QMA male to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to QMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to QMA cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.1/9.5 mini DIN male to QMA male right angle low PIM cable 200 cm length using SPP-250-LLPL coax, LF solder.

1 : $218.99
25 : $208.04
50 : $197.09

PE3W04442-200CM

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. SMA Male to SMA Male Right Angle Cable 200 cm Length Using RG188 Coax., Radio frequency assembly SMA male to SMA male right angle cable 200 cm length using RG188 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male right angle cable 200 cm length using RG188 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3W04442-200CM, can also be known as a SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3W04442-200CM is built with RG188 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 400 MHz maximum frequency SMA male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04442-200CM can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male right angle cable 200 cm length using RG188 coax.

1 : $100.99
25 : $95.94
50 : $90.89
100 : $86.85

PE3W05692-200CM

Pasternack Enterprises

Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 2 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. SMP Female Right Angle to SMA Female 2 Hole Flange Cable 200 cm Length Using PE-047SR Coax., Radio frequency assembly SMP female right angle to SMA female 2 hole flange cable 200 cm length using PE-047SR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMP female right angle to SMA female 2 hole flange cable 200 cm length using PE-047SR coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMP cable connection on one end and SMA 2 hole flange cable connection on the other. Our right angle SMP to SMA cable assemblies have a female gender on end 1 and female on end 2. This SMP to SMA cable is a female to female coax assembly, PE3W05692-200CM, can also be known as a right angle SMP jack to SMA jack cable assembly and will be shipped same-day as it is purchased. SMP jack to SMA jack cable assembly PE3W05692-200CM is built with PE-047SR which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with right angle SMP to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMP right angle female to SMA female 2 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W05692-200CM can also be used in the other direction and will be SMA female 2 hole flange to right angle SMP female cable assembly if the opposite connectivity is required. SMP right angle jack to SMA jack 2 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMA cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMP female right angle to SMA female 2 hole flange cable 200 cm length using PE-047SR coax.

1 : $254.99
25 : $242.24
50 : $229.49
100 : $219.29

PE3W12220

Pasternack Enterprises

Key Specifications, Connector Series 1: SHV, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm. SHV Jack Bulkhead to BNC Male Cable Using RG400 Coax. PE3W12220 is a SHV jack bulkhead to BNC male cable using RG400 coax. This Pasternack SHV jack bulkhead to BNC male cable assembly uses a 50 Ohm SHV for connector 1 and a 50 Ohm BNC for connector 2. Our jack SHV bulkhead to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W12220 SHV jack bulkhead to BNC male cable assembly is constructed with RG400 coax.

PE3W22058

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PECX007, RF Cable Type: 141LL SR, RF Cable Impedance: 50 Ohm. N Female Right Angle Bulkhead to TNC Male Cable Using 141 Coax. PE3W22058 is a N female right angle bulkhead to TNC male cable using 141LL SR coax. This Pasternack N female right angle bulkhead to TNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm TNC for connector 2. N right angle to TNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our female N right angle bulkhead to male TNC cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W22058 N female right angle bulkhead to TNC male cable assembly is constructed with 141LL SR coax.

PE7092-20

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Power Maximum: 2 Watt, VSWR Maximum: 1.35:1, Attenuation: 20 dB, Connector Series 1: SMA, Connector Gender 1: Male, Connector Series 2: SMA, Connector Gender 2: Female, Body Material: Passivated Stainless Steel. 20 dB Fixed Attenuator, SMA Male to SMA Female Passivated Stainless Steel Body Rated to 2 Watts Up to 18 GHz. PE7092-20 is a fixed 20 dB attenuator from Pasternack. This 20dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This SMA attenuator has a male gender on side 1 and a SMA female connector on side 2. The Pasternack PE7092-20 20 dB attenuator is rated for up to 18 GHz. Our microwave attenuator is rated to 2 Watts at the stated attenuation value. Our fixed RF attenuator PE7092-20 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 20dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.
RoHS : Compliant

1 : $88.89
25 : $84.45
50 : $80.0
100 : $76.45

PE2208-20

Pasternack Enterprises

Key Specifications, Directionality: Directional, Connector Series: SMA, Connector Gender: Female, Design: Coupler, Minimum Frequency: 500 MHz, Maximum Frequency: 2 GHz, Maximum Input Power: 50 Watt, Coupling Value: 20 dB. Directional 20 dB SMA Coupler From 500 MHz to 2 GHz Rated To 50 Watts. RF coupler part number PE2208-20 from Pasternack is one of over 40,000 RF components available for same day shipping worldwide. This RF coupler is directional and is manufactured with SMA ports. Our directional coupler design uses SMA ports that are female gender and 50 Ohm impedance. The Pasternack directional coupler design is rated for a minimum frequency of 500 MHz and a maximum frequency of 2 GHz. Directional coupler part # PE2208-20 is constructed with a coupling value of 20 dB and a coupler directivity of 23 dB. This female SMA directional coupler is built with a maximum insertion loss of 0.4 dB and a maximum input power of 50 watts. Our directional coupler design with SMA connector is rated for a maximum insertion loss of 0.4 dB and a maximum VSWR of 1.2. Additional female SMA coupler specs for this RF component can be found on its radio frequency directional coupler PDF specifications datasheet above. PE2208-20 directional 20 dB SMA coupler is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack and it can be bought and then shipped worldwide the same-day as with Pasternack's other in-stock RF parts.

1 : $516.99
10 : $496.31
25 : $475.63

PE1WAN112-20

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-112, Frequency, Min: 7.05 GHz, Frequency, Max: 10 GHz, Beam Width V: 17.3, Beam Width H: 17.5. WR-112 Waveguide Standard Gain Horn Antenna Operating from 7.05 GHz to 10 GHz 20 dBi Gain with UG-51/U-Square Flange and Cage Style Mount. Pasternack’s PE1WAN112-20 WR-112 waveguide horn is also known as a waveguide horn antenna. This WR-112 standard gain horn waveguide antenna has a nominal gain of 20 dBi. Our waveguide horn can operate at frequencies ranging from 7.05 to 10 GHz. The standard gain horn antenna with linear polarization has a typical VSWR of 1.3:1 and is suitable for test and measurement industries. This 20 dBi waveguide horn from Pasternack has an overall length of 9.43 inches, a width of 4.33 inches, and a weight of 0.88 lbs. Our WR-112 waveguide horn antenna has a typical vertical beam width of 17.3 degrees and a horizontal beam width of 17.5 degrees at 3 dB. Our antenna comes with a UG-51 square cover flange and is built to precise microwave and millimeter wave horn antenna design specifications. This WR-112 standard gain horn antenna has an aluminum body. Additional dimensions and specifications for this antenna are on our downloadable PDF datasheet. This WR-112 waveguide horn antenna with 20 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Our horn antenna can ship worldwide on the same business day as it is purchased with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements.

1 : $2,820.0
5 : $2,707.2
10 : $2,594.4
25 : $2,481.6

PE3C7862-200CM

Pasternack Enterprises

Key Specifications, Connector Series 1: 2.2-5, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.2-5, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. 2.2-5 Male Right Angle to 2.2-5 Female Bulkhead Low PIM Cable 200 Cm Length Using 1/4 inch Superflexible Coax., Radio frequency assembly 2.2-5 male right angle to 2.2-5 female bulkhead low PIM cable 200 cm length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 2.2-5 male right angle to 2.2-5 female bulkhead low PIM cable 200 cm length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.2-5 to 2.2-5 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle 2.2-5 cable connection on one end and 2.2-5 bulkhead cable connection on the other. Our low PIM right angle 2.2-5 to 2.2-5 cable assemblies have a male gender on end 1 and female on end 2. This 2.2-5 to 2.2-5 cable is a male to female coax assembly, PE3C7862-200CM, can also be known as a low PIM right angle 2.2-5 plug to 2.2-5 jack cable assembly and will be shipped same-day as it is purchased. 2.2-5 plug to 2.2-5 jack cable assembly PE3C7862-200CM is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 2.2-5 cable assembly is manufactured with right angle 2.2-5 to 2.2-5 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM 2.2-5 right angle male to 2.2-5 female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7862-200CM can also be used in the other direction and will be 2.2-5 female bulkhead to right angle 2.2-5 male cable assembly if the opposite connectivity is required. Low PIM 2.2-5 right angle plug to 2.2-5 jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.2-5 to 2.2-5 cable assembly for quick shipment worldwide. Variations of 2.2-5 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.2-5 male right angle to 2.2-5 female bulkhead low PIM cable 200 cm length using 1/4 inch superflexible coax.

1 : $171.99
25 : $163.39
50 : $154.79
100 : $147.91

TE Connectivity

1-292207-3

TE Connectivity

MINI CT SGL DIP V 13P NAT PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 13 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 13 | PCB Header & Receptacle | Part Number: 1-292207-3 | Internal Number: 1-292207-3 | TE Connectivity
RoHS : Compliant

1,000 : $0.66
500 : $0.68
250 : $0.7
100 : $0.72
50 : $0.75
1 : $0.82

32,640

1-2201196-0

TE Connectivity

0.4 STACKING CONN H0.98 PLUG ASSEMBLY PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Board-to-Board Board-to-Board Configuration: Mezzanine (Stacking) Number of Positions: 10 PCB Mount Header Vertical Board-to-Board Mezzanine (Stacking) | PCB Header & Receptacle | Part Number: 1-2201196-0 | Internal Number: 1-2201196-0 | TE Connectivity
RoHS : Compliant

1,000 : $0.76
500 : $0.79
250 : $0.81
100 : $0.84
50 : $0.86
1 : $0.95

28,951

CRGCQ1210F220R

TE Connectivity

CRGCQ 1210 220R 1% Resistance Value: 220 Ω Element Type: Thick Film Resistor Type: General Purpose Resistor Passive Component Tolerance: 1 % Package Size Code: 1210 Surface Mount Resistor | 220 Ω Thick Film General Purpose Resistor 1 % | Part Number: CRGCQ1210F220R | Internal Number: 1-2176345-7 | TE Connectivity
RoHS : Compliant

10,000 : $0.09
5,000 : $0.09
2,500 : $0.09
1,000 : $0.09
500 : $0.1
250 : $0.1
100 : $0.1
50 : $0.1
25 : $0.1
10 : $0.11
1 : $0.11

21,680

CRGP2512F220R

TE Connectivity

CRGP 2512 220R 1% Resistance Value: 220 Ω Element Type: Thick Film Resistor Type: General Purpose Resistor Passive Component Tolerance: 1 % Package Size Code: 2512 Surface Mount Resistor | 220 Ω Thick Film General Purpose Resistor 1 % | Part Number: CRGP2512F220R | Internal Number: 1-2176331-7 | TE Connectivity
RoHS : Compliant

5,000 : $0.34
2,500 : $0.34
1,000 : $0.35
500 : $0.36
250 : $0.37
100 : $0.38
50 : $0.38
25 : $0.39
10 : $0.4
1 : $0.41

9,240

EP7WS220RJ

TE Connectivity

EP 7W (S) 220R 5% Resistance Value: 220 Ω Element Type: Ceramic Composition Wire Wound Resistor Type: Power Resistor Passive Component Tolerance: 5 % Power Rating: 7 W Through-Hole Resistor | 220 Ω Ceramic Composition Power Resistor | Part Number: EP7WS220RJ | Internal Number: 2176084-9 | TE Connectivity
RoHS : Compliant

2,500 : $1.11
1,000 : $1.14
500 : $1.17
250 : $1.2
100 : $1.23
50 : $1.26
25 : $1.29
10 : $1.32
1 : $1.35

8,883

2-292207-4

TE Connectivity

MINI CT SGL DIP V 4P BLACK PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 4 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 4 | PCB Header & Receptacle | Part Number: 2-292207-4 | Internal Number: 2-292207-4 | TE Connectivity
RoHS : Compliant

1,000 : $0.47
500 : $0.48
250 : $0.5
100 : $0.52
50 : $0.53
1 : $0.58

6,328

HT-SCE-3/32-2.0-9

TE Connectivity

HT-SCE-3/32-2.0-9 Primary Product Color: White Printable Tubing Grade: High Temperature Printable Tubing Type: Ladder Recovered Inside Diameter (Max): .031 in Recovered Inside Diameter (Max): .79 mm White High Temperature Ladder .031" | Ht-Sce High Temperature Sleeve | Part Number: HT-SCE-3/32-2.0-9 | Internal Number: 5476270001 | Alias Number: 1-1194311-2 | TE Connectivity
RoHS : Compliant

500 : $6.87
250 : $7.1
100 : $7.34
50 : $7.58
25 : $7.82
10 : $8.05
1 : $8.29

4,111

3502220KJT

TE Connectivity

3502 220K 5% Resistance Value: 220K Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 5 % Package Size Code: 2010 Surface Mount Resistor | 220K Ω Thick Metal Film Power Resistor 5 % | Part Number: 3502220KJT | Internal Number: 3-2176399-6 | TE Connectivity
RoHS : Compliant

2,500 : $0.47
1,000 : $0.48
500 : $0.49
250 : $0.51
100 : $0.52
50 : $0.53
25 : $0.54
10 : $0.56
1 : $0.57

3,845

ER16220RJT

TE Connectivity

ER16 220R 5% AMMO PACK Resistance Value: 220 Ω Element Type: Wire Wound Resistor Type: Power Resistor Passive Component Tolerance: 5 % Power Rating: 11 W Through-Hole Resistor | 220 Ω Wire Wound Power Resistor 5 % | Part Number: ER16220RJT | Internal Number: 2-1623748-8 | TE Connectivity
RoHS : Compliant

250 : $3.45
100 : $3.59
50 : $3.73
25 : $3.87
10 : $4.01
1 : $4.14

1,500

2205071-1

TE Connectivity

CA MICRO-MATCH MOW-PB 10POS Cable Assembly Type: MICRO-MATCH MOW to MICRO-MATCH Number of Positions: 10 Cable Assembly Length: .075 m Cable Assembly Length: .246 ft Cable Color: Gray MICRO-MATCH MOW to MICRO-MATCH 10 .075 m .246 ft | Micro-Match Std Pb To Mow Cable Assy | Part Number: 2205071-1 | Internal Number: 2205071-1 | Gray | TE Connectivity
RoHS : Compliant

500 : $6.8
250 : $7.03
100 : $7.27
50 : $7.5
25 : $7.74
10 : $7.97
1 : $8.21

917

CA6922-000

TE Connectivity

203W301-25-G02-0 Body Orientation: Straight Molded Part Shape Code: 203 Lipped: Yes Material Code: 25 Material Systems Code: 25 Heat Shrink Boot | Straight 203 25 | Part Number: CA6922-000 | Internal Number: CA6922-000 | Alias Number: 203W301-25-G02-0 | TE Connectivity
RoHS : Compliant

1 : $18.91

900

2205060-3

TE Connectivity

CA MICRO-MATCH MOW-MOW 4POS Cable Assembly Type: MICRO-MATCH MOW to MICRO-MATCH MOW Number of Positions: 4 Cable Assembly Length: .2 m Cable Assembly Length: .656 ft Cable Color: Gray MICRO-MATCH MOW to MICRO-MATCH MOW 4 .2 m .656 ft | Micro-Match Std Mow To Mow Cable Assy | Part Number: 2205060-3 | Internal Number: 2205060-3 | Gray | TE Connectivity
RoHS : Compliant

250 : $3.09
100 : $3.21
50 : $3.34
25 : $3.46
10 : $3.58
1 : $3.71

637

AV2220000Q04

TE Connectivity

AV22 DPM 3A NO LED Push Button Switch Product Type: Anti-Vandal Switch Illuminated: Without Operating Function: Momentary Configuration (Pole-Throw): Double Pole - Single Throw Number of Actuators: Single Anti-Vandal Switch Without Momentary Double Pole - Single Throw | Pushbutton Switch | Part Number: AV2220000Q04 | Internal Number: 2213771-5 | TE Connectivity
RoHS : Compliant

50 : $32.27
25 : $34.17
10 : $36.06
1 : $37.96

134

AV2220E312Q04

TE Connectivity

AV22 DPM 3A MOVE RING LED RED 12V Push Button Switch Product Type: Anti-Vandal Switch Illuminated: With Operating Function: Momentary Configuration (Pole-Throw): Double Pole - Single Throw Number of Actuators: Single Anti-Vandal Switch With Momentary Double Pole - Single Throw | Pushbutton Switch | Part Number: AV2220E312Q04 | Internal Number: 4-2213772-5 | TE Connectivity
RoHS : Compliant

50 : $35.59
25 : $37.69
10 : $39.78
1 : $41.87

AV2220E524Q04

TE Connectivity

AV22 DPM 3A MOVE RING LED YELLOW 24V Push Button Switch Product Type: Anti-Vandal Switch Illuminated: With Operating Function: Momentary Configuration (Pole-Throw): Double Pole - Single Throw Number of Actuators: Single Anti-Vandal Switch With Momentary Double Pole - Single Throw | Pushbutton Switch | Part Number: AV2220E524Q04 | Internal Number: 5-2213772-1 | TE Connectivity
RoHS : Compliant

50 : $35.59
25 : $37.69
10 : $39.78
1 : $41.87

Teledyne HiRel

5962-8762201EA

Teledyne HiRel

DECODER/DEMULTIPLEXER, 3-TO-8-LINE
RoHS : Not Compliant

5962-9322001MSA

Teledyne HiRel

FLIP-FLOP, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-9172202QXA

Teledyne HiRel

BINARY COUNTER, 4-BIT SYNCHRONOUS, PRESETTABLE, ASYNCHRONOUS RESET, TTL-COMPAT
RoHS : Not Compliant

5962-9220206MFA

Teledyne HiRel

DECODER, DUAL 1-OF-4, WITH ENABLE, TTL-COMP. INPUTS AND LIMITED OUTPUT VOLT.
RoHS : Not Compliant

M38510/32203BFA

Teledyne HiRel

BUFFER/DRIVER, HEX, NONINVERTING, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

5962-9220206MEA

Teledyne HiRel

DECODER, DUAL 1-OF-4, WITH ENABLE, TTL-COMP. INPUTS AND LIMITED OUTPUT VOLT.
RoHS : Not Compliant

5962-9172202QEA

Teledyne HiRel

BINARY COUNTER, 4-BIT SYNCHRONOUS, PRESETTABLE, ASYNCHRONOUS RESET, TTL-COMPAT
RoHS : Not Compliant

5962-9172201MFA

Teledyne HiRel

BINARY COUNTER, 4-BIT SYNCHRONOUS, PRESETTABLE, ASYNCHRONOUS RESET, TTL-COMPAT
RoHS : Not Compliant

5962-9220202MEA

Teledyne HiRel

DECODER, DUAL 1-OF-4, WITH ENABLE, TTL-COMP. INPUTS AND LIMITED OUTPUT VOLT.
RoHS : Not Compliant

5962-9172202QFA

Teledyne HiRel

BINARY COUNTER, 4-BIT SYNCHRONOUS, PRESETTABLE, ASYNCHRONOUS RESET, TTL-COMPAT
RoHS : Not Compliant

5962-9220101MCA

Teledyne HiRel

PARITY GENERATOR/CHECKER, 9-BIT
RoHS : Not Compliant

5962-9322001QRA

Teledyne HiRel

FLIP-FLOP, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-87622012A

Teledyne HiRel

DECODER/DEMULTIPLEXER, 3-TO-8-LINE
RoHS : Not Compliant

5962-9220101M2A

Teledyne HiRel

PARITY GENERATOR/CHECKER, 9-BIT
RoHS : Not Compliant

5962-9322001MRA

Teledyne HiRel

FLIP-FLOP, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

Venkel Ltd.

SAFC2220C0G502-220JNE

VENKEL LTD

Safety Cap;2220;C0G;X1/Y2;22pF;�5%
RoHS : Compliant

SAFC2208C0G502-220JNE

VENKEL LTD

Safety Cap;2208;C0G;X1/Y2;22pF;�5%
RoHS : Compliant

PWCR0603-TK-220JT

VENKEL LTD

Pulse Withstanding CR;0603;1/4W;�100PPM;22R;�5%
RoHS : Compliant

PWCR1206-UK-2203FT

VENKEL LTD

Pulse Withstanding CR;1206;1/3W;�100PPM;220K;�1%
RoHS : Compliant

PWCR1206-WK-2201FT

VENKEL LTD

Pulse Withstanding CR;1206;3/4W;�100PPM;2.2K;�1%
RoHS : Compliant

C0805C0G251-220JNP

VENKEL LTD

HV Chip Capacitor;0805;C0G;250V;22pF;�5%
RoHS : Compliant

C0805HQN201-220FNP

VENKEL LTD

High-Q NP0 Chip Capacitor;0805;HQN;200V;22pF;�1%
RoHS : Compliant

C1210C0G631-220JNE

VENKEL LTD

HV Chip Capacitor;1210;C0G;630V;22pF;�5%
RoHS : Compliant

AGCR0805-YK-2201FT

VENKEL LTD

Auto Grade Resistor;0805;1/3W;�100PPM;2.2K;�1%
RoHS : Compliant

AGCR1206-VK-2202DT

VENKEL LTD

Auto Grade Resistor;1206;1/2W;�100PPM;22K;�0.5%
RoHS : Compliant

SAFC2208C0G502-680JNE

VENKEL LTD

Safety Cap;2208;C0G;X1/Y2;68pF;�5%
RoHS : Compliant

SAFC2208X7R502-820KNE

VENKEL LTD

Safety Cap;2208;X7R;X1/Y2;82pF;�10%
RoHS : Compliant

SAFC2220C0G502-820JNE

VENKEL LTD

Safety Cap;2220;C0G;X1/Y2;82pF;�5%
RoHS : Compliant

SAFC2220X7R502-222KNE

VENKEL LTD

Safety Cap;2220;X7R;X1/Y2;2200pF;�10%
RoHS : Compliant

HPTF0603-QC-2202UT

VENKEL LTD

High Power Thin Film CR;0603;1/10W;�50PPM;22K;�0.01%
RoHS : Compliant

Waytek, Inc.

AT62-201-16141

Amphenol Sine Systems

AT/AHD-9 Female Nickel Socket CONTACT 16-20GA SIZE 16 Solid 0462-201-16141 Alt# 38194

15 : $0.5317
50 : $0.5016
100 : $0.4644
200 : $0.4481
500 : $0.4319
1,000 : $0.4156

216,724

AT62-203-12141

Amphenol Sine Systems

ATP/AHD-6 Female Nickel Socket Contact 14-12GA Size 12 Solid 0462-203-12141

1 : $2.0744
10 : $1.9024
50 : $1.7628
100 : $1.6875
200 : $1.6125
500 : $1.5371

46,786

C1131/35 2202

APM HEXSEAL

APM Hexseal C1131/35 2202 full toggle boot protects toggle switch assemblies from weather and salt spray. It features black soft silicone rubber construction, 15/32-32 UNS-2B thread sizing, and a full boot design for sealed panel-mounted switches.

1 : $1.9666
10 : $1.7857
50 : $1.6487
100 : $1.4309
200 : $1.3425
500 : $1.2895

10,201

7000132205

22-18GA #10 High Temperature Ring Terminal

100 : $0.1775
200 : $0.161
500 : $0.144
1,000 : $0.1305
5,000 : $0.1244

5,876

AT60-220-1231

Amphenol Sine Systems

ATP/AHD-6 Male Gold Pin Contact 14-12 GA Size 12 Solid 0460-220-1231

5 : $1.4596
10 : $1.3793
50 : $1.3282
100 : $1.2553
200 : $1.2188
500 : $1.1239

2,898

C1132/20 SA5005

APM HEXSEAL

APM Hexseal C1132/20 black half toggle boot protects toggle switch bushings from weather and salt spray while allowing the round handle to protrude. It features black silicone rubber construction, 15/32-32 thread sizing, and a half-boot sealing style.

1 : $2.8787
10 : $2.6667
50 : $2.5177
100 : $2.3561
200 : $2.2136
500 : $2.1186

2,357

098633220981B

The Bosch Group

The Bosch 098633220981B is a 12V, 30 amp mini relay with SPST (normally open) configuration, designed for reliable switching of high-current circuits in automotive and mobile electrical systems. Incorporating an internal resistor for circuit protection, it helps suppress voltage spikes and improve overall system stability.

1 : $5.3242
5 : $4.7986
10 : $4.4041
50 : $4.2508
100 : $4.1191
200 : $3.9878

1,355

33472-2001

Molex

The Molex 33472-2001 is an MX150 1.5 mm sealed female connector housing designed for high-density wire-to-wire connections in automotive and harsh environments. It features a 20-circuit (20-pin), dual-row configuration with keying option A, ensuring proper mating and preventing misconnection. Constructed from durable thermoplastic, it provides environmental sealing when used with MX150 terminals and seals, protecting against moisture, dirt, and vibration. Rated up to ~22A and 250V with an operating range of -40C to +125C, it is ideal for automotive, industrial, and heavy-duty applications.
RoHS : Compliant

1 : $4.0285
10 : $3.8788
50 : $3.7412
100 : $3.1794
200 : $3.067
500 : $2.9671

1,137

SC42-2008A-B001

Gep Power Products Inc

Housing & Seal - PDM-U 96 POS, 280 Term, 10MM

1 : $23.9555
10 : $21.4107
50 : $19.4408
100 : $18.7845
200 : $18.1174
500 : $17.4611

119

0332201107

The Bosch Group

Micro Relay, Change Over, SPDT 5-Pin, 12VDC, 30A NO, 10 NC

1 : $8.3487
5 : $7.7645
10 : $7.3264
50 : $7.156
100 : $7.0102
200 : $6.8639

115