266L-TM3-R Price, Distributor, Stock

1 : $70.745
5 : $65.949
10 : $58.955
25 : $58.075
50 : $58.075
100 : $57.221
250 : $55.586
500 : $54.042
1,000 : $53.301
2,500 : $53.301
10,000 : $53.301

8526-6L12-10P

SOURIAU-SUNBANK

Connector 26482

8526-6L12-10SN

SOURIAU-SUNBANK

Connector 26482

8526-6L12-10PN

SOURIAU-SUNBANK

Connector 26482

8526-6L12-10PW

SOURIAU-SUNBANK

Connector 26482

Master Electronics

P266L

Ferraz Shawmut

Fuse Block - Semiconductor - For Use With A100P - 125-400A - 1/4-20 Stud.
RoHS : Compliant

21 : $459.68
12 : $472.11
6 : $484.53
3 : $496.96
1 : $499.39

ZLTMM-112-66-L-D-509

Samtec Inc

Headers & Wire Housings 2.00 mm Shrouded Variable Stack Height Terminal Strip
RoHS : Compliant

5,000 : $1.45
2,500 : $2.39
1,000 : $3.34
500 : $3.71
250 : $5.27
100 : $5.5
25 : $5.95
5 : $7.09

55/0312-26-6L-CS2570

TE Connectivity

Hook-up Wire 55/0312-26-6L-CS2570 PRICE PER FOOT MOQ Reduction
RoHS : Compliant

5,000 : $1.6
3,750 : $1.63
2,500 : $2.37
1,250 : $4.49

ZLTMM-122-66-L-D-250

Samtec Inc

RoHS : Compliant

1,000 : $4.13
500 : $5.77
250 : $6.41
100 : $6.99
50 : $9.52
25 : $9.97
5 : $11.0

ZLTMM-112-66-L-D-500

Samtec Inc

RoHS : Compliant

5,000 : $1.36
2,500 : $2.25
1,000 : $3.15
500 : $3.49
250 : $4.97
100 : $5.19
25 : $5.61
5 : $6.69

55K9512-24-2/6-6L

TE Connectivity

55K9512-24-2/6-6L MOQ Reduction
RoHS : Compliant

3,281 : $6.13
2,461 : $6.26
1,641 : $9.19
821 : $17.98

MTSW-110-22-L-D-266-LA

Samtec Inc

.100 Variable Post Height Terminal Strip
RoHS : Compliant

7,500 : $0.948
5,000 : $0.973
2,500 : $1.219
1,000 : $1.384
500 : $1.551
250 : $1.597
100 : $1.672
25 : $2.058

ZLTMM-112-66-L-D-386

Samtec Inc

Conn Board Stacker HDR 24 POS 9.8mm Stack Height 2mm Solder ST Through Hole Bulk
RoHS : Compliant

5,000 : $1.36
2,500 : $2.25
1,000 : $3.15
500 : $3.49
250 : $4.97
100 : $5.19
25 : $5.61
5 : $6.69

ZLTMM-122-66-L-D-400

Samtec Inc

2.00 MM SHROUDED VARIABLE
RoHS : Compliant

1,000 : $4.39
500 : $6.11
250 : $6.79
100 : $7.4
50 : $10.09
25 : $10.56
5 : $11.65

ZLTMM-122-66-L-D-485

Samtec Inc

2.00 MM SHROUDED VARIABLE
RoHS : Compliant

1,000 : $4.39
500 : $6.11
250 : $6.79
100 : $7.4
50 : $10.09
25 : $10.56
5 : $11.65

S1SS-03-28-GF-02.66-L1

Samtec Inc

RoHS : Compliant

7,500 : $1.46
5,000 : $1.47
2,500 : $1.71
1,000 : $1.84
500 : $2.6
250 : $2.72
50 : $2.94
10 : $3.5

ZLTMM-112-66-L-D-475

Samtec Inc

RoHS : Compliant

5,000 : $1.36
2,500 : $2.25
1,000 : $3.15
500 : $3.49
250 : $4.97
100 : $5.19
25 : $5.61
5 : $6.69

DW-03-17-S-D-266-LL

Samtec Inc

RoHS : Compliant

10,000 : $0.545
7,500 : $0.547
5,000 : $0.562
2,500 : $0.685
1,000 : $0.757
500 : $1.015
250 : $1.062
25 : $1.308

53611-S26-6LF

Amphenol FCi

Quickie Header Wire to Board Connector Double Row 26 Positions 2.54 mm (0.1 in.) Vertical Header 0.38 μm (15 μin.) Gold Mating Plating.
RoHS : Compliant

2,160 : $3.07
1,620 : $3.13
1,080 : $4.56
540 : $8.64
250 : $8.66
100 : $8.68
20 : $8.7

S1SS-04-28-GF-22.66-L

Samtec Inc

RoHS : Compliant

5,000 : $1.91
2,500 : $2.28
1,000 : $2.66
500 : $2.77
250 : $3.99
100 : $4.1
50 : $4.3
5 : $5.29

Neutron USA

266L24

Hammond Manufacturing

Power Transformers DualPrimarySecondary 48VA, 24V CT @ 2A
RoHS : Compliant

1 : $74.99

266L6

Hammond Manufacturing

Power Transformers DualPrimarySecondary 12.6VA, 6.3V CT @ 2A
RoHS : Compliant

1 : $79.99

266L14

Hammond Manufacturing

Power Transformers Power transformer, chassis mount, 28VA, 14V @ 2A or 7V @ 4A
RoHS : Compliant

1 : $104.99

266LH25

Hammond Manufacturing

Power Transformers DualPrimarySecondary 70.6VA/25.2V CT@2.8A
RoHS : Compliant

1 : $144.99

266L20

Hammond Manufacturing

Power Transformers DualPrimarySecondary 40VA, 20V CT @ 2A
RoHS : Compliant

1 : $104.99

266L16

Hammond Manufacturing

Power Transformers DualPrimarySecondary 35.2VA, 16V CT @2.2A
RoHS : Compliant

1 : $104.99

266L12

Hammond Manufacturing

Power Transformers DualPrimarySecondary 31.5VA/12.6V CT@2.5A
RoHS : Compliant

1 : $89.99

266L12B

Hammond Manufacturing

Power Transformers - Board Mount Power transformer, chassis mount, 25.2VA, 12.6V @ 2A or 6.3V @ 4A
RoHS : Compliant

1 : $69.99

266LA12

Hammond Manufacturing

Power Transformers DualPrimarySecondary 24VA, 12V CT @ 2A
RoHS : Compliant

1 : $84.99

266L28

Hammond Manufacturing

Power Transformers DualPrimarySecondary 56VA, 28V CT @ 2A
RoHS : Compliant

1 : $124.99

Pasternack Enterprises US

PE3C2266LF

Pasternack Enterprises

Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. BNC Male to BNC Male Low Loss Cable Using LMR-240 Coax with Times Microwave Components, LF Solder., Radio frequency assembly BNC male to BNC male low loss cable using LMR-240 coax with Times Microwave components, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to BNC male low loss cable using LMR-240 coax with Times Microwave components, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a BNC cable connection on the other. Our low loss BNC to BNC cable assembly has a male gender on end 1 and a male on end 2. PE3C2266LF can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2266LF RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our BNC male to BNC male cable has a maximum VSWR of 1.4:1. BNC plug to BNC plug cable assembly PE3C2266LF is built with LMR-240 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss BNC plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1,465

PE3C2266LF-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. BNC Male to BNC Male Low Loss Cable 12 Inch Length Using LMR-240 Coax with Times Microwave Components, LF Solder., Radio frequency assembly BNC male to BNC male low loss cable 12 inch length using LMR-240 coax with Times Microwave components, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to BNC male low loss cable 12 inch length using LMR-240 coax with Times Microwave components, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a BNC cable connection on the other. Our low loss BNC to BNC cable assembly has a male gender on end 1 and a male on end 2. PE3C2266LF-12 can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2266LF-12 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our BNC male to BNC male cable has a maximum VSWR of 1.4:1. BNC plug to BNC plug cable assembly PE3C2266LF-12 is built with LMR-240 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss BNC plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $60.99
25 : $57.94
50 : $54.89
100 : $52.45

293

PE3C2266LF-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. BNC Male to BNC Male Low Loss Cable 24 Inch Length Using LMR-240 Coax with Times Microwave Components, LF Solder., Radio frequency assembly BNC male to BNC male low loss cable 24 inch length using LMR-240 coax with Times Microwave components, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to BNC male low loss cable 24 inch length using LMR-240 coax with Times Microwave components, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a BNC cable connection on the other. Our low loss BNC to BNC cable assembly has a male gender on end 1 and a male on end 2. PE3C2266LF-24 can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2266LF-24 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our BNC male to BNC male cable has a maximum VSWR of 1.4:1. BNC plug to BNC plug cable assembly PE3C2266LF-24 is built with LMR-240 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss BNC plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $63.19
25 : $60.03
50 : $56.87
100 : $54.34

293

PE3C2266LF-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. BNC Male to BNC Male Low Loss Cable 36 Inch Length Using LMR-240 Coax with Times Microwave Components, LF Solder., Radio frequency assembly BNC male to BNC male low loss cable 36 inch length using LMR-240 coax with Times Microwave components, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to BNC male low loss cable 36 inch length using LMR-240 coax with Times Microwave components, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a BNC cable connection on the other. Our low loss BNC to BNC cable assembly has a male gender on end 1 and a male on end 2. PE3C2266LF-36 can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2266LF-36 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our BNC male to BNC male cable has a maximum VSWR of 1.4:1. BNC plug to BNC plug cable assembly PE3C2266LF-36 is built with LMR-240 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss BNC plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $64.19
25 : $60.98
50 : $57.77
100 : $55.2

293

PE3W00266LF

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to TNC Male Right Angle Cable Using LMR-200 Coax, LF Solder. PE3W00266LF is a TNC male right angle to TNC male right angle cable using LMR-200 coax. This Pasternack TNC male right angle to TNC male right angle cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. TNC right angle to TNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male TNC right angle to male TNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00266LF TNC male right angle to TNC male right angle cable assembly is constructed with LMR-200 coax, * LMR™ is a trademark of Times Microwave Systems.

PE36266LF

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm.

PE3W03266LF

Pasternack Enterprises

Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG213/U, RF Cable Type: RG213, RF Cable Impedance: 50 Ohm. 7/16 DIN Female to 7/16 DIN Male Right Angle Cable Using RG213 Coax, LF Solder, RoHS. PE3W03266LF is a 7/16 DIN female to 7/16 DIN male right angle cable using RG213 coax. This Pasternack 7/16 DIN female to 7/16 DIN male right angle cable assembly uses a 50 Ohm 7/16 DIN for connector 1 and a 50 Ohm 7/16 DIN for connector 2. 7/16 DIN to 7/16 DIN right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female 7/16 DIN to male 7/16 DIN right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03266LF 7/16 DIN female to 7/16 DIN male right angle cable assembly is constructed with RG213 coax.

PE33266LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. SMA Female to SMA Female Cable Using RG178 Coax with HeatShrink, LF Solder, RoHS. PE33266LF/HS is a SMA female to SMA female cable using RG178 coax. This Pasternack SMA female to SMA female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our female SMA to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE33266LF/HS SMA female to SMA female cable assembly is constructed with RG178 coax.

PE3C6266LF

Pasternack Enterprises

Key Specifications, Connector Series 1: 2.4mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.92mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. 2.4mm Male to 2.92mm Male Cable Using PE-P086HF Coax, LF Solder. PE3C6266LF is a 2.4mm male to 2.92mm male cable using PE-P086HF coax. This Pasternack 2.4mm male to 2.92mm male cable assembly uses a 50 Ohm 2.4mm for connector 1 and a 50 Ohm 2.92mm for connector 2. Our male 2.4mm to male 2.92mm cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C6266LF 2.4mm male to 2.92mm male cable assembly is constructed with PE-P086HF coax.

PE3266LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. SMA Female to SSMB Plug Cable Using RG316 Coax with HeatShrink, LF Solder. PE3266LF/HS is a SMA female to SSMB plug cable using RG316 coax. This Pasternack SMA female to SSMB plug cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SSMB for connector 2. Our female SMA to plug SSMB cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3266LF/HS SMA female to SSMB plug cable assembly is constructed with RG316 coax.

PE3W13266LF

Pasternack Enterprises

Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm.

PE3W00266LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to TNC Male Right Angle Cable. PE3W00266LF/HS is a TNC male right angle to TNC male right angle cable using LMR-200 coax. This Pasternack TNC male right angle to TNC male right angle cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. TNC right angle to TNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male TNC right angle to male TNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00266LF/HS TNC male right angle to TNC male right angle cable assembly is constructed with LMR-200 coax, * LMR™ is a trademark of Times Microwave Systems.

PE33266LF

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. SMA Female to SMA Female Cable Using RG178 Coax, LF Solder, RoHS. PE33266LF is a SMA female to SMA female cable using RG178 coax. This Pasternack SMA female to SMA female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our female SMA to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE33266LF SMA female to SMA female cable assembly is constructed with RG178 coax.

PE3W16266LF

Pasternack Enterprises

Key Specifications, Connector Series 1: 1.0/2.3, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: 1.0/2.3, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG6A/U, RF Cable Type: RG6, RF Cable Impedance: 75 Ohm. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male Cable Using 75 Ohm RG6 Coax, LF Solder. PE3W16266LF is a 1.0/2.3 male to 1.0/2.3 male cable using RG6 coax. This Pasternack 1.0/2.3 male to 1.0/2.3 male cable assembly uses a 75 Ohm 1.0/2.3 for connector 1 and a 75 Ohm 1.0/2.3 for connector 2. Our male 1.0/2.3 to male 1.0/2.3 cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE3W16266LF 1.0/2.3 male to 1.0/2.3 male cable assembly is constructed with RG6 coax.

PE3W01266LF

Pasternack Enterprises

Key Specifications, Connector Series 1: UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: HN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG213/U, RF Cable Type: RG213, RF Cable Impedance: 50 Ohm. UHF Male to HN Male Cable Using RG213 Coax, LF Solder. PE3W01266LF is a UHF male to HN male cable using RG213 coax. This Pasternack UHF male to HN male cable assembly uses a 50 Ohm UHF for connector 1 and a 50 Ohm HN for connector 2. Our male UHF to male HN cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01266LF UHF male to HN male cable assembly is constructed with RG213 coax.