 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
2751-AL3-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 Avnet Americas | 42751-2 | TE Connectivity | Ring Terminal 16AWG to 14AWG 1/4" Tin" - Tape and Reel (Alt: 42751-2) RoHS : Compliant |
| 328,000 | |
| 794275-1 | TE Connectivity | - Bag (Alt: 794275-1) RoHS : Compliant |
| 14,000 | ||
| 776275-1 | TE Connectivity | Conn Shrouded Header 8 POS 4mm Solder ST Through Hole - Trays (Alt: 776275-1) RoHS : Compliant |
| 174 | ||
| MS27511B10R | Glenair Inc | - Bulk (Alt: MS27511B10R) RoHS : Not Compliant |
| 89 | ||
| MS27511F14C | Glenair Inc | - Bulk (Alt: MS27511F14C) RoHS : Not Compliant |
| 46 | ||
| MS27511F10R | Glenair Inc | - Bulk (Alt: MS27511F10R) RoHS : Not Compliant |
| 45 | ||
| ATT-0275-10-SMA-02 | Bel Fuse | - Bulk (Alt: ATT-0275-10-SMA-02) RoHS : Not Compliant | 22 | |||
| 1-776275-1 | TE Connectivity | Conn Wire to Board HDR 8 POS 4mm Solder ST Thru-Hole - Trays (Alt: 1-776275-1) RoHS : Compliant |
| 20 | ||
| MS27513E8B35PA | Amphenol Corporation | - Bulk (Alt: MS27513E8B35PA) RoHS : Not Compliant | 18 | |||
| MS27511B18R | Glenair Inc | - Bulk (Alt: MS27511B18R) RoHS : Not Compliant |
| 5 | ||
| MS27511B24R | Amphenol Corporation | - Bulk (Alt: MS27511B24R) RoHS : Not Compliant |
| 3 | ||
| MS27510F22A | Glenair Inc | - Bulk (Alt: MS27510F22A) RoHS : Not Compliant |
| 0 | ||
| MS27510B18CM | Glenair Inc | - Bulk (Alt: MS27510B18CM) RoHS : Not Compliant |
| 0 | ||
| MS27510F8C | Glenair Inc | - Bulk (Alt: MS27510F8C) RoHS : Not Compliant |
| 0 | ||
| MS27510B24C | Glenair Inc | - Bulk (Alt: MS27510B24C) RoHS : Not Compliant |
| 0 | ||
 Newark | 1275.1003. | Mentor Graphics | Light Pipe, 45Mm, 1 Pipes, Circular; |Mentor 1275.1003. RoHS : Compliant |
| 50,709 | |
| 42751-2 | TE Connectivity | Ring Tongue Terminal, 1/4", 14Awg; Stud Size - Metric:-; Stud Size - Imperial:1/4"; Wire Size Awg Max:14Awg; Conductor Area Csa:2Mm²; Product Range:-; Insulator Colour:-; Insulator Material:Uninsulated Rohs Compliant: Yes |Te Connectivity Amp 42751-2 RoHS : Compliant |
| 6,651 | ||
| ECS-.327-5-16-TR | ECS International Inc | Crystal, 32.768Khz, 5Pf, 1.6Mm X 1Mm; |Ecs Inc International ECS-.327-5-16-TR RoHS : Compliant |
| 4,343 | ||
| ECS-.327-5-16-TR | ECS International Inc | Crystal, 32.768Khz, 5Pf, 1.6Mm X 1Mm; |Ecs Inc International ECS-.327-5-16-TR RoHS : Compliant |
| 4,343 | ||
| 597-2751-607F | Dialight | Led, Green, 35Mcd, 1208, 571Nm; |Dialight 597-2751-607F RoHS : Compliant |
| 2,428 | ||
| 597-2751-607F | Dialight | Led, Green, 35Mcd, 1208, 571Nm; |Dialight 597-2751-607F RoHS : Compliant |
| 2,428 | ||
| 747275-1 | TE Connectivity | Strain Relief, 37Way; |Te Connectivity Amp 747275-1 RoHS : Compliant |
| 1,003 | ||
| 2751080000 | Weidmüller Interface GmbH & Co. KG | End Plate, Terminal Block, 56.9 X 2.1Mm; For Use With:Weidmuller A Series Terminal Blocks; Accessory Type:End Plate; Product Range:A Series Rohs Compliant: Yes |Weidmuller 2751080000 RoHS : Compliant |
| 70 | ||
| 2751080000 | Weidmüller Interface GmbH & Co. KG | End Plate, Terminal Block; |Weidmuller 2751080000 RoHS : Compliant |
| 30 | ||
| MS27511B12R | Amphenol Interconnect India Pvt Ltd | Dust Cap W/Ss Rope Hole, Size 12, Alum; |Amphenol Interconnect India MS27511B12R RoHS : Not Compliant |
| 30 | ||
| HTSN-M2-7-5-1 | Essentra Components | Standoff, Hex Female-Female, 5Mm, M2; |Essentra Components HTSN-M2-7-5-1 RoHS : Compliant |
| 13 | ||
| FMCA2275-100CM | Fairview Microwave Inc | Coax Cable Assembly; |Fairview Microwave FMCA2275-100CM RoHS : Not Compliant |
| 4 | ||
| 127517-HMC871LC5 | Analog Devices Inc | Eval Brd, Ea Optical Mod Driver, 20Ghz; |Analog Devices, Inc. 127517-HMC871LC5 RoHS : Compliant |
| 3 | ||
| VAL-SPP-T2-275-1+1-UT-R | Phoenix Contact | Surge Protector, 40Ka, 40Ka, Din Rail; |Phoenix Contact VAL-SPP-T2-275-1+1-UT-R RoHS : Compliant |
| 3 | ||
| 747275-1 | TE Connectivity | D Sub Strain Relief 37Way, Thermoplastic; Product Range:Amplimite Hdf-20 Series; For Use With:Hdf-20 Series Idc D Sub Connectors; D Sub Shell Size:Dc; Strain Relief Material:Thermoplastic; Cable Diameter Max:-; No. Of Positions:37 Rohs Compliant: Yes RoHS : Compliant |
| 1 | ||
 Analog Devices Inc | LTC2751BCUHF-16#TRPBF | Analog Devices Inc | C Out 12-/14-/16-B SoftSpan RoHS : Compliant |
| 2,500 | |
| LTC2751ACUHF-16#PBF | Analog Devices Inc | C Out 12-/14-/16-B SoftSpan RoHS : Compliant |
| 1,364 | ||
| LTC2751BIUHF-16#PBF | Analog Devices Inc | C Out 12-/14-/16-B SoftSpan RoHS : Compliant |
| 631 | ||
| LTC2751CUHF-12#PBF | Analog Devices Inc | C Out 12-/14-/16-B SoftSpan RoHS : Compliant |
| 156 | ||
| LTC2751BCUHF-16#PBF | Analog Devices Inc | C Out 12-/14-/16-B SoftSpan RoHS : Compliant |
| 104 | ||
| 127517-HMC871LC5 | Analog Devices Inc | HMC871LC5 Evaluation PCB RoHS : Compliant |
| 10 | ||
| LTC2751CUHF-14#PBF | Analog Devices Inc | C Out 12-/14-/16-B SoftSpan RoHS : Compliant |
| 0 | ||
| LTC2751BIUHF-16#TRPBF | Analog Devices Inc | C Out 12-/14-/16-B SoftSpan RoHS : Compliant |
| 0 | ||
| LTC2751IUHF-12#TRPBF | Analog Devices Inc | C Out 12-/14-/16-B SoftSpan RoHS : Compliant |
| 0 | ||
| LTC2751ACUHF-16#TRPBF | Analog Devices Inc | C Out 12-/14-/16-B SoftSpan RoHS : Compliant |
| 0 | ||
| LTC2751CUHF-12#TRPBF | Analog Devices Inc | C Out 12-/14-/16-B SoftSpan RoHS : Compliant |
| 0 | ||
| LTC2751IUHF-12#PBF | Analog Devices Inc | C Out 12-/14-/16-B SoftSpan RoHS : Compliant |
| 0 | ||
| LTC2751IUHF-14#PBF | Analog Devices Inc | C Out 12-/14-/16-B SoftSpan RoHS : Compliant |
| 0 | ||
| LTC2751IUHF-14#TRPBF | Analog Devices Inc | C Out 12-/14-/16-B SoftSpan RoHS : Compliant |
| 0 | ||
| MAX2751EUA+ | Analog Devices Inc | 2.4GHz Monolithic Voltage-Cont RoHS : Compliant |
| 0 | ||
 RS | 747275-1 | TE Connectivity | D-SUB STRAIN RELIEF THERMOPLASTIC RIBBON 4 BLACK 37 AMP/HDF-20 RoHS : Compliant |
| 46 | |
| MBC275-1024L | Bel Power Solutions | POWER SUPPLY, AC-DC, OPEN FRAME, MEDICAL: 275W, 24V,10.41ALOW PROFILE |
| 42 | ||
| MS27513E8A35P | Amphenol Aerospace | AMPHENOL - 38999 CONNECTOR |
| 14 | ||
| BAM015T (BESA-12-75-12-BANKING-SCREW) | Balluff Inc | BES - INDUCTIVE SENSOR ACCESSORIES, BESA-12-75-12-BANKING-SCREW |
| 3 | ||
| 3342751 | RS Pro | IN-LINE PLUG CONNECTOR FOR TYPE K THERMOCOUPLE GREEN 200C MAX TEMP |
| 2 | ||
| 2453540 (25533637) (HFI805002751NA-025RS) | RS Pro | 1/2-20 X 2 3/4 IN HEX HEAD CAP SCREW, GRADE 8, YELLOW ZINC PLATED, FINE |
| 2 | ||
| 2454201 (25533675) (HFI806202751NA-025RS) | RS Pro | 5/8-18 X 2 3/4 IN HEX HEAD CAP SCREW, GRADE 8, YELLOW ZINC PLATED, FINE |
| 2 | ||
| 2454239 (25533739) (HFI810002751NA-010RS) | RS Pro | 1-14 X 2 3/4 IN HEX HEAD CAP SCREW, GRADE 8, YELLOW ZINC PLATED, FINE |
| 2 | ||
| 2453548 (25533658) (HFI805602751NA-025RS) | RS Pro | 9/16-18 X 2 3/4 IN HEX HEAD CAP SCREW, GRADE 8, YELLOW ZINC PLATED, FINE |
| 2 | ||
| 09110012751 | HARTING Technology Group | HEAVY DUTY HAN HC MODULAR 350 FEMALE AXIAL SCREW TERMINAL CONTACT (35-70MM2) RoHS : Compliant |
| 1 | ||
| VZWF-B-L-M22C-G34-275-1P4-6 (1492113) | Festo | VALVE, SOLENOID, VZWF-B-L-M22C-G34-275-1P4-6 |
| 1 | ||
| 2454139 (25533555) (HFI802502751NA-050RS) | RS Pro | 1/4-28 X 2 3/4 IN HEX HEAD CAP SCREW, GRADE 8, YELLOW ZINC PLATED, FINE |
| 1 | ||
| 2751 | Leviton Manufacturing Co | LOCKING PLUG, 30A, 120/208V, 3 PHASE Y, L18-30P, 4P, 4W, NON-GROUNDING |
| 0 | ||
| 2751 | Adafruit Industries | TINY THERMAL RECEIPT PRINTER - TTL SERIAL / USB |
| 0 | ||
| 2751 | 80/20 Inc | 10 S ROLLER WHEEL BRACKET W/ 2281 |
| 0 | ||
 Microchip Technology Inc | GC4275-154-2 | Microchip Technology Inc | Si PIN Non Hermetic EPSM SMT, Projected EOL: 2046-08-15 - Contact for Pricing | 0 | ||
 Bisco Industries | 275-160210-06-0101 | ITW Fastex | 41,839 | |||
| 15275-101 | Staffall | 100 | ||||
| 17227518 | WASHERS | 96 | ||||
| 3-822275-1 | TE Connectivity | 48 | ||||
| 1631-3005-SMODL=.275-12 | RAF Electronic Hardware | 35 | ||||
| 1275-102 | HH Smith | 15 | ||||
| 275-160210-04-0101 | ITW Fastex | 10 | ||||
| MS27511B16N | MS Connectors | 7 | ||||
| 5275-1-05-01-00-00-01-0 | Mill-Max Mfg Corp | RoHS : Not Compliant | 5 | |||
| 1275-105 | HH Smith | 3 | ||||
| 1275-101 | HH Smith | 3 | ||||
| MS27511B12R | MS Connectors | 2 | ||||
| 27515-11 | INSERTS | 2 | ||||
| HBL2751 | Hubbell Wiring Device-Kellems | 1 | ||||
| MS27510B10CL | MS Connectors | 1 | ||||
 Rochester Electronics | BUK7275-100A,118 | Nexperia | Power Field-Effect Transistor, 21.7A I(D), 100V, 0.075ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-252AA RoHS : Compliant |
| 199,558 | |
ADM1275-1ARQZ-R7 | Analog Devices Inc | Power Supply Support Circuit, Adjustable, 1 Channel, PDSO20 RoHS : Compliant |
| 960 | ||
| ADM1275-1ARQZ | Analog Devices Inc | Power Supply Support Circuit, Adjustable, 1 Channel, PDSO20 RoHS : Compliant |
| 6,077 | ||
UCC27517DBVT | Texas Instruments | Gate Driver IGBT, N-Channel MOSFET 2 Driver Low-Side SOT-23-5 T/R RoHS : Compliant |
| 48 | ||
LM2751SD-A/NOPB | Texas Instruments | LED Driver, 1-Segment RoHS : Compliant |
| 1,000 | ||
TS3A27518ERTWR | Texas Instruments | IC DPST 1:2 6 1.65V - 3.6V 24-QFN T/R RoHS : Compliant |
| 151 | ||
UCC2751D | Texas Instruments | Telecom Circuit, 1-Func, BICMOS, PDSO16 RoHS : Compliant |
| 9,375 | ||
TPS62751DSKR | Texas Instruments | IC VOLT REG Fixed 1 REG 3V 400mA SOT-223-6 T/R RoHS : Compliant |
| 21,789 | ||
BQ27510DRZT | Texas Instruments | Power Supply Support Circuit, Adjustable, 1 Channel, PDSO12 RoHS : Compliant |
| 490 | ||
| LM2751SD-A | National Semiconductor Corporation | LED Driver, 1-Segment RoHS : Not Compliant |
| 815 | ||
| LM2751SD-A/NOPB | National Semiconductor Corporation | LED Driver, 1-Segment RoHS : Compliant |
| 12,299 | ||
| UPA2751GR-E1-A | Renesas Electronics Corporation | Power Field-Effect Transistor, N-Channel MOSFET RoHS : Compliant |
| 7,500 | ||
| UPA2751GR-E1-AT | Renesas Electronics Corporation | Power Field-Effect Transistor, N-Channel MOSFET RoHS : Compliant |
| 2,500 | ||
| D27512-25 | Rochester Electronics LLC | EPROM - UV 512kbit 64k x 8 4.5V - 5.5V Parallel 170ns Tube RoHS : Not Compliant | 452 | |||
| UCC2751D | Unitrode Corporation | Telecom Circuit, 1-Func, BICMOS, PDSO16 RoHS : Compliant |
| 2,477 | ||
 Sager | TW-02-06-TM-S-275-138 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Surface Mount Board Stacking Header, 2.00 mm Pitch RoHS : Compliant |
| 1,390 | |
| TW-10-09-T-S-275-100 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Surface Mount Board Stacking Header, 2.00 mm Pitch RoHS : Compliant |
| 334 | ||
| TW-14-03-S-S-275-150 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Surface Mount Board Stacking Header, 2.00 mm Pitch RoHS : Compliant |
| 200 | ||
| BA1-B0-34-275-121-D | Carling Technologies | Circuit Breakers BA1B034275121D RoHS : Compliant |
| 0 | ||
| E27513-000 | TE Connectivity | TE Connectivity | 0 | |||
| TW-03-03-T-D-275-125 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-03-04-F-D-275-140 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Surface Mount Board Stacking Header, 2.00 mm Pitch RoHS : Compliant |
| 0 | ||
| TW-03-04-T-D-275-140 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| NYB27-51006 | OMRON Electronic Components | Omron Box,i7-7gen,32G,PCI,NoOS,NoHD, | 0 | |||
| FW-10-04-G-D-275-100 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| FW-13-03-G-D-275-100-A | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| FW-20-05-L-D-275-170-P-FR | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| FW-30-03-L-D-275-100 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| FW-30-05-L-D-275-167-TR | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Micro Board Stacking Header, 0.050 Pitch RoHS : Compliant |
| 0 | ||
| FW-49-03-L-D-275-100 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
 Coilcraft Direct | CMT2-7.5-1L | Coilcraft Inc | Common mode choke, toroid, RoHS RoHS : Compliant |
| 0 | |
 TME | 42751-2 | TE Connectivity | Tip: ring; M6; crimped; for cable; non-insulated; tinned; brass RoHS : Compliant |
| 20,000 | |
| 1275.1003 | Mentor Graphics | Fiber for LED; Ø: 3mm; L: 45mm; round; Front: flat |
| 2,007 | ||
| 275.100-10120 | Electronicon | Discharge module; 120kΩ; discharging PFC capacitors |
| 89 | ||
| 275.167-10010 | Electronicon | Protective cap; H: 95mm; Ø: 95mm; Ø95mm; for capacitors; 275 |
| 27 | ||
| 275187-9 | TE Connectivity | 275187-9 RoHS : Compliant |
| 19 | ||
| 0062600275100 | ALPS MAYKESTAG GmbH | Drill bit; for metal; Ø: 2.75mm; L: 61mm; high speed steel |
| 18 | ||
| 275.187-10010 | Electronicon | Protective cap; H: 116mm; Ø: 116mm; Ø116mm; for capacitors; 277 |
| 15 | ||
| 1275.1002 | Mentor Graphics | Fiber for LED; Ø: 3mm; L: 30mm; round; Front: flat |
| 0 | ||
| 1622275-1 | TE Connectivity | Resistor: thin film; 750kΩ; THT; 250mW; ±1%; Ø2x3.5mm; axial; Ø: 2mm RoHS : Compliant |
| 0 | ||
| 2751090000 | Weidmüller Interface GmbH & Co. KG | End piece; A; beige; wemid; L: 69.5mm; H: 69.5mm RoHS : Compliant |
| 0 | ||
| 7P.25.8.275.1020 | FINDER SpA | Surge arrester; Type 2; Poles: 3+N; 20kA; for DIN rail mounting |
| 0 | ||
| 275 1000 2 | Rennsteig Tools Inc | Crowbar; 1000mm |
| 0 | ||
| 327516M | KING TONY | Socket: Torx®; socket spanner; E16; square; 3/8"; 63mm; long |
| 0 | ||
| 327512M | KING TONY | Socket: Torx®; socket spanner; E12; square; 3/8"; 63mm; long |
| 0 | ||
| 3403.0275.11 | Schurter Electronic Components | Fuse: fuse; 16x5.3x5.3mm; ceramic; SMD; 1.25A; 277VAC; 250VDC; UMT-H RoHS : Compliant |
| 0 | ||
 Ameya Holding Limited | UCC27517DBVT | Texas Instruments | UCC27517DBVT , MOSFET 功率驱动器, 4A, 5针 SOT-23封装 RoHS : Compliant | 13,250 | ||
| TS3A27518ERTWR | Texas Instruments | IC 6-CHANNEL(QSPI) 1:2 MULTIPLEXER/DEMUL RoHS : Compliant | 5,810 | |||
| TS3A27518EPWR | Texas Instruments | TS3A27518EPWR 模拟开关, 六路：1 x 2, 1.65 → 3.6 V, 24针 TSSOP封装 RoHS : Compliant | 2,000 | |||
UCC27517DBV | Texas Instruments | RoHS : Compliant | 963 | |||
BUK7275-100A,118 | NXP Semiconductors | MOSFET N-CH 100V 21.7A DPAK RoHS : Compliant | 544 | |||
 ComSIT USA | 19242751 | AVAILABLE EU | 618,750 | |||
| BQ27510DRZRG3 | Texas Instruments | AVAILABLE EU | 6,546 | |||
ComSIT USA | BUK7275100A | NXP Semiconductors | N-CHANNEL TRENCHMOS STANDARD LEVEL FET Power Field-Effect Transistor, 21.7A I(D), 100V, 0.075ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-252 RoHS : Compliant | 11,810 | ||
| BUK9275100A | NXP Semiconductors | N-CHANNEL TRENCHMOS LOGIC LEVEL FET Power Field-Effect Transistor, 21.7A I(D), 100V, 0.084ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-252 RoHS : Compliant | 5,000 | |||
UCC27517AQDBVRQ1 | Texas Instruments | SINGLE-CHANNEL HIGH-SPEED LOW-SIDE GATE DRIVER (WITH 4-AMP PEAK SOURCE AND SINK) Buffer/Inverter Based MOSFET Driver, 4A, PDSO5 RoHS : Compliant | 3,321 | |||
| BQ27510DRZTG3 | Texas Instruments | Fixed, 1 Channel, PDSO12 RoHS : Compliant | 500 | |||
UCC27511DBVT | Texas Instruments | Buffer/Inverter Based MOSFET Driver, 8A, BICMOS, PDSO6 RoHS : Compliant | 245 | |||
| BQ27510DRZRG3 | Texas Instruments | Fixed, 1 Channel, PDSO12 RoHS : Compliant | 193 | |||
| 2751807 | Phoenix Contact | The INTERBUS protocol microcontroller CMOS gate array Microcontroller, CMOS, PQFP100 RoHS : Compliant | 190 | |||
| 9140022751 | HARTING Technology Group | Heavy Duty Connector Inserts Module Female RoHS : Compliant | 188 | |||
| MMK275106K63F11L4 | Evox Rifa / KEMET | Electronic Component RoHS : Compliant | 146 | |||
| XR16L2751IMF | Exar Corporation | 2.25V TO 5.5V DUART WITH 64-BYTE FIFO AND POWERSAVE Serial I/O Controller, 2 Channel(s), 0.78125MBps, CMOS, PQFP48 RoHS : Compliant | 87 | |||
| 27510010300 | Electronic Component RoHS : Not Compliant | 72 | ||||
| BVEI3042751 | hahn | Electronic Component RoHS : Compliant | 29 | |||
| UCC27517DBVT | Texas Instruments | SGL CHAN H-SPEED, LOW-SIDE GATE DRIVER (BASED ON CMOS INPUT THRESHOLD WITH 4-A PEAK SOURCE AND 4-A PEAK SINK) Buffer/Inverter Based MOSFET Driver, 4A, BICMOS, PDSO5 RoHS : Compliant | 24 | |||
| SKY7762751E2 | Skyworks Solutions Inc | Electronic Component RoHS : Compliant | 20 | |||
| D27513250V10 | Intel Corporation | UVPROM, 64KX8, 250ns, MOS, CDIP28 RoHS : Not Compliant | 10 | |||
 Interstate Connecting Components | MS27510A8CM | Glenair Inc | PROTECTIVE COVERS | 0 | ||
| MS27510B18CM | Amphenol PCD | MS27510B18CM | 0 | |||
| MS27510B18CM | Glenair Inc | MIL-DTL-38999 Series II connectors have up to 128 contacts contained in an insert. They are environmentally sealed and have an operating temperature between -65 C and 200 C. MIL-DTL-38999 II harsh environment thin walled restricted length connectors fea RoHS : Not Compliant |
| 0 | ||
| MS27510B24C | Glenair Inc | MIL-DTL-38999 Series II connectors have up to 128 contacts contained in an insert. They are environmentally sealed and have an operating temperature between -65 C and 200 C. MIL-DTL-38999 II harsh environment thin walled restricted length connectors fea RoHS : Not Compliant |
| 0 | ||
| MS27510B24C | Amphenol PCD | MS27510B24C | 0 | |||
| MS27510C16CN | Amphenol PCD | MS27510C16CN | 0 | |||
| MS27510C16CN | Glenair Inc | PROTECTIVE COVERS RoHS : Compliant | 0 | |||
| MS27510F22A | Amphenol PCD | MS27510F22A | 0 | |||
| MS27510F22A | Glenair Inc | MIL-DTL-38999 Series II connectors have up to 128 contacts contained in an insert. They are environmentally sealed and have an operating temperature between -65 C and 200 C. MIL-DTL-38999 II harsh environment thin walled restricted length connectors fea |
| 0 | ||
| MS27510F8C | Amphenol PCD | MS27510F8C | 0 | |||
| MS27510F8C | Glenair Inc | MIL-DTL-38999 Series II connectors have up to 128 contacts contained in an insert. They are environmentally sealed and have an operating temperature between -65 C and 200 C. MIL-DTL-38999 II harsh environment thin walled restricted length connectors fea |
| 0 | ||
| MS27510Z24CL | Amphenol PCD | MS27510Z24CL | 0 | |||
| MS27511B18CL | Amphenol Aerospace | DUST CAPS | 0 | |||
| MS27511B18CL | Glenair Inc | MIL-DTL-38999 Series II connectors have up to 128 contacts contained in an insert. They are environmentally sealed and have an operating temperature between -65 C and 200 C. MIL-DTL-38999 II harsh environment thin walled restricted length connectors fea RoHS : Not Compliant |
| 0 | ||
| MS27511B18CL | Amphenol PCD | MS27511B18CL | 0 | |||
 NexGen Digital | 8572-7511-000 | 20 | ||||
 PEI Genesis | MS27510A8CM | SOURIAU-SUNBANK |
| 0 | ||
| MS27510B18CM | SOURIAU-SUNBANK |
| 0 | |||
| MS27510B18CM | Amphenol PCD |
| 0 | |||
| MS27510B24C | Amphenol PCD |
| 0 | |||
| MS27510B24C | SOURIAU-SUNBANK |
| 0 | |||
| MS27510C16CN | SOURIAU-SUNBANK |
| 0 | |||
| MS27510C16CN | Amphenol PCD |
| 0 | |||
| MS27510F22A | Amphenol PCD |
| 0 | |||
| MS27510F22A | SOURIAU-SUNBANK |
| 0 | |||
| MS27510F8C | SOURIAU-SUNBANK |
| 0 | |||
| MS27510F8C | Amphenol PCD |
| 0 | |||
| MS27510Z24CL | Amphenol PCD |
| 0 | |||
| MS27511B18CL | Amphenol PCD |
| 0 | |||
| MS27511B18CL | SOURIAU-SUNBANK |
| 0 | |||
| MS27511C12N | SOURIAU-SUNBANK |
| 0 | |||
 Powell Electronics | TW-02-06-TM-S-275-138 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 917 | |
| TW-10-09-T-S-275-100 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 220 | ||
| MS27513E22B35S | Conesys | Front, box mount rec. (long grommet) |
| 149 | ||
| TW-14-03-S-S-275-150 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 132 | ||
| MS27513E24B61SA | Conesys | Front, box mount rec. (long grommet) |
| 100 | ||
| MS27511F10C | SPI Connects | D38999 Series II Receptacle Cover,Chain, |
| 90 | ||
| MS27513E14A35S | Conesys | Front, box mount rec. (long grommet) |
| 66 | ||
| MS27513E16B8P | Conesys | Front, box mount rec. (long grommet) |
| 56 | ||
| MS27511F24R | SPI Connects | D38999 Series II Receptacle Cover, Rope, |
| 14 | ||
| MS27510C16CN | Glenair Inc | PROTECTIVE COVERS - PROTECTIVE COVERS RoHS : Compliant |
| 13 | ||
| METMS27513E10A5S | Amphenol Corporation | CONNECTOR |
| 13 | ||
| MS27513E10A5P | Conesys | Front, box mount rec. (long grommet) |
| 10 | ||
| MS27510A8CM | Glenair Inc | PROTECTIVE COVERS - PROTECTIVE COVERS |
| 9 | ||
| MS27511C22C | Glenair Inc | PROTECTIVE COVERS - PROTECTIVE COVERS RoHS : Compliant |
| 5 | ||
| 582751-000 | TE Connectivity | connector accessories RoHS : Not Compliant |
| 3 | ||
 Richardson RFPD | 747275-1 | TE Connectivity | Connector Accessories Strain Relief Straight Therm RoHS : Compliant |
| 0 | |
| LTC2751BCUHF-16#TRPBF | Analog Devices Inc | DAC 1-CH 16-bit 38-Pin QFN EP T/R RoHS : Compliant |
| 0 | ||
| LTC2751CUHF-14#PBF | Analog Devices Inc | DAC 1-CH 14-bit 38-Pin QFN EP Tube RoHS : Compliant |
| 0 | ||
| R-6275-1 | TE Connectivity | ELE, TF, P1000, 385, .06%, 0.051T RoHS : Compliant |
| 0 | ||
| 3042-7511-000 | Radiall | RF Coax Brd Mt Conn RoHS : Not Compliant | 0 | |||
| 2012-7511-000 | Radiall | Conn SMB M 0Hz to 4GHz 50Ohm Solder RA Panel Mount RoHS : Not Compliant |
| 0 | ||
| LTC2751BCUHF-16#PBF | Analog Devices Inc | DAC 1-CH 16-bit 38-Pin QFN EP Tube RoHS : Compliant |
| 0 | ||
| LTC2751BIUHF-16#TRPBF | Analog Devices Inc | DAC 1-CH 16-bit 38-Pin QFN EP T/R RoHS : Compliant |
| 0 | ||
| SI53352BD12751-AM | Skyworks Solutions Inc | Output Clock Buffer RoHS : Compliant | 0 | |||
| 275-10-12 | Spectrum Control | FIXED COAX ATTENUATR RoHS : Compliant | 0 | |||
| EVAL-ADV7612-7511 | Analog Devices Inc | ADV7612 Transceiver Evaluation Board RoHS : Compliant | 0 | |||
| LTC2751IUHF-12#TRPBF | Analog Devices Inc | DAC 1-CH 12-bit 38-Pin QFN EP T/R RoHS : Compliant |
| 0 | ||
| LTC2751ACUHF-16#TRPBF | Analog Devices Inc | DAC 1-CH 16-bit 38-Pin QFN EP T/R RoHS : Compliant |
| 0 | ||
| 152-75-1 | Spectrum Control | RF ATTENUATOR RELAY RoHS : Compliant | 0 | |||
| 127517-HMC871LC5 | Analog Devices Inc | HMC871LC5 RF Amplifier Evaluation Board RoHS : Compliant |
| 0 | ||
 Rutronik | VLMU35CB20-275-120 | Vishay Intertechnologies | UVC LED LOW 10mW 100mA 120°275NM RoHS : Compliant |
| 40 | |
| VLMU35CT20-275-120 | Vishay Intertechnologies | UVC LED MID 19mW 150mA 120°275NM RoHS : Compliant |
| 38 | ||
 Chip 1 Exchange | 172751-M2 | TE Connectivity | INSTOCK | 91,000 | ||
| 2000275-1 | TE Connectivity | INSTOCK | 1,592 | |||
| MS27511C18C | Glenair Inc | INSTOCK RoHS : Compliant | 1,583 | |||
UCC27517ADBVT | Texas Instruments | INSTOCK RoHS : Compliant | 1,500 | |||
| VLMU35CT20-275-120 | Vishay Intertechnologies | INSTOCK RoHS : Compliant | 1,300 | |||
| 7427512- | Wurth Elektronik | INSTOCK | 778 | |||
| ZW0608GS275125 | INSTOCK | 351 | ||||
| ZW0608GS275125 | Samtec Inc | INSTOCK | 351 | |||
| M5L27512K-2 | MIT | INSTOCK | 289 | |||
| M275123FI | INSTOCK | 168 | ||||
| 281275-1 | INSTOCK | 58 | ||||
| 7427511- | Wurth Elektronik | INSTOCK | 31 | |||
| AM27519PC | INSTOCK | 25 | ||||
| M27512FI | INSTOCK | 14 | ||||
| 1D51027-515 | INSTOCK | 12 | ||||
 Avnet Abacus | S2751-46R | Harwin | Test Terminal for Test ProbesMicro Test Lead Clips and Hooks Brass Surface Mount (Alt: S2751-46R) RoHS : Compliant | 182,500 | ||
| 794275-1 | TE Connectivity | Connector Accessories Interface Seal (Alt: 794275-1) RoHS : Compliant | 12,000 | |||
| 62751-1 | TE Connectivity | (Alt: 62751-1) RoHS : Compliant | 0 | |||
| 1827512 | Phoenix Contact | SMC 1511GF381 SMC1511GF381 (Alt: 1827512) RoHS : Compliant | 0 | |||
| 747275-1 | TE Connectivity | Connector Accessories Strain Relief 37 POS Thermoplastic Black (Alt: 747275-1) RoHS : Compliant | 0 | |||
| 747275-1 | TE Connectivity | Connector Accessories Strain Relief 37 POS Thermoplastic Black (Alt: 747275-1) RoHS : Compliant | 0 | |||
| R-6275-1 | TE Connectivity | ELETFP1000385060051T (Alt: R-6275-1) RoHS : Compliant | 0 | |||
| PA2751NLT | Pulse Electronics Corporation | INDSMTCOMMON MODE NPB - Tape and Reel (Alt: PA2751NLT) RoHS : Compliant | 0 | |||
| 582751-000 | TE Connectivity | Connector Accessories TinelLock Backshell with Ring Size 21 RA Aluminum Alloy Cadmium Finish Oliv (Alt: 582751-000) RoHS : Not Compliant | 0 | |||
| ULP275-1358 | Bel Fuse | (Alt: ULP275-1358) RoHS : Compliant | 0 | |||
| ULP275-1315 | Bel Fuse | (Alt: ULP275-1315) RoHS : Compliant | 0 | |||
| MS27510B14C | Glenair Inc | (Alt: MS27510B14C) RoHS : Compliant | 0 | |||
| BFC237462751 | Vishay Intertechnologies | Film Capacitor 750 pF 200 V 10 630 V PP Radial Box 2 Pin (Alt: BFC237462751) RoHS : Compliant | 0 | |||
| ABC275-1048L | Bel Fuse | (Alt: ABC275-1048L) RoHS : Compliant | 0 | |||
| ABC275-1030L | Bel Fuse | (Alt: ABC275-1030L) RoHS : Compliant | 0 | |||
Avnet Asia | NMUX27518EBYHP | Nexperia | Switch Multiplexer/Demultiplexer, Analogue, 6-CH, 1.62V to 3.63V, SPDT, 1:2, -40 to 105 ?C, HWQFN-24 (Alt: NMUX27518EBYHP) RoHS : Compliant |
| 15,000 | |
| NMUX27518BYHP | Nexperia | Switch Multiplexer/Demultiplexer, Analogue, 6-CH, 1.08V to 3.63V, SPDT, 1:2, -40 to 125 ?C, HWQFN-24 (Alt: NMUX27518BYHP) RoHS : Compliant | 0 | |||
| PI3A27518ZDEX | Diodes Incorporated | Analog Multiplexer/Demultiplexer 6-Channel DPDT 1:2 24-Pin TQFN (Alt: PI3A27518ZDEX) RoHS : Compliant |
| 0 | ||
| LT19BF2751 | Qnity Laird | QR-13-AF/SS3,3.18X22.86X41.70MM (Alt: LT19BF2751) RoHS : Compliant | 0 | |||
| 794275-1 | TE Connectivity | (Alt: 794275-1) RoHS : Compliant | 0 | |||
| M39003/01-2751 | Vishay Intertechnologies | Tantalum Capacitor, 22 uF, 15 V, ? 10%, PC Pin, 224 mA, Axial Leaded, R, 4.7 mm, 12.04 mm (Alt: M39003/01-2751) RoHS : Compliant | 0 | |||
| VLMU35CB20-275-120 | Vishay Intertechnologies | SMD-LED UVC 275NM 120? QFN-E4 (Alt: VLMU35CB20-275-120) RoHS : Compliant | 0 | |||
 Avnet Silica | PI3A27518ZDEX | Diodes Incorporated | Analog MultiplexerDemultiplexer 6Channel DPDT 12 24Pin TQFN (Alt: PI3A27518ZDEX) RoHS : Compliant | 0 | ||
| PI3A27518Q2ZDWEX | Diodes Incorporated | (Alt: PI3A27518Q2ZDWEX) RoHS : Compliant | 0 | |||
| NMUX27518PW-Q100J | Nexperia | Switch MultiplexerDemultiplexer Analogue 6CH 108V to 363V SPDT 12 40 to 125 C TSSOP24 (Alt: NMUX27518PW-Q100J) RoHS : Compliant | 0 | |||
 Component Electronics, Inc | CR32-751J-T | KYOCERA Corporation | IN STOCK SHIP TODAY |
| 4,700 | |
| 275-1555 | Radio Shack | IN STOCK SHIP TODAY |
| 4,287 | ||
| 275-1549 | Radio Shack | IN STOCK SHIP TODAY |
| 2,678 | ||
| 822275-1 | TE Connectivity | IN STOCK SHIP TODAY |
| 273 | ||
| 2751200005 | Wickmann by Littelfuse | IN STOCK SHIP TODAY | 200 | |||
| 748275-1 | TE Connectivity | IN STOCK SHIP TODAY | 178 | |||
| MMK27.5-106K100F13L4-TRAY | Evox Rifa / KEMET | IN STOCK SHIP TODAY | 143 | |||
| 55275-1 | TE Connectivity | IN STOCK SHIP TODAY | 13 | |||
| AM27519PC | AMD | IN STOCK SHIP TODAY | 10 | |||
| 02751 | C2G | IN STOCK SHIP TODAY |
| 8 | ||
| 747275-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 6 | ||
M27512-2F1 | STMicroelectronics | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 5 | ||
| M27512F1 | SGS Semiconductor Ltd | IN STOCK SHIP TODAY |
| 2 | ||
| 1-776275-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 1 | ||
| 1057275-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 1 | ||
 DB Roberts | D7-275-140-400 | Southco | These two styles of quick access fasteners provide convenient installation and operation with grip tolerance and a wide range of tolerance for support panel and mounting panel thicknesses. They are available in metallic and thermoplastic constructions to |
| 760 | |
| D7-275-135-400 | Southco | These two styles of quick access fasteners provide convenient installation and operation with grip tolerance and a wide range of tolerance for support panel and mounting panel thicknesses. They are available in metallic and thermoplastic constructions to | 0 | |||
| S14275-12 | Heyco | S6474-TP-50-078-12 BLACK | 0 | |||
| 5755-PH-556-027-51 | RAF Electronic Hardware | 0 | ||||
| 52-27-51-4 | Southco | Captive fastening in tight spaces is no problem with the reduced footprint of these Miniature Series captive screws. Combination tool-head recesses and knurled screw options provide lots of versatility for fastening/unfastening by hand or with tools. | 0 | |||
| 2751-832-AL | RAF Electronic Hardware | 0 | ||||
| 5708-N-275-150-200 | RAF Electronic Hardware | SHOULDER WASHERS | 0 | |||
| 34002751E | Essentra Components | 0 | ||||
| 52-27-51-4-008 | Southco | Captive fastening in tight spaces is no problem with the reduced footprint of these Miniature Series captive screws. Combination tool-head recesses and knurled screw options provide lots of versatility for fastening/unfastening by hand or with tools. | 0 | |||
| E3-275-1512 | Southco | VISE ACTION,COMPRESSION LATCH LARGE | 0 | |||
| D7-275-150-400 | Southco | These two styles of quick access fasteners provide convenient installation and operation with grip tolerance and a wide range of tolerance for support panel and mounting panel thicknesses. They are available in metallic and thermoplastic constructions to | 0 | |||
| 5759-N-556-027-515 | RAF Electronic Hardware | 0 | ||||
| FAN275-132 | Pop Rivets | EXTENDER KIT DEEP APPLICATION | 0 | |||
| D7-275-145-400 | Southco | These two styles of quick access fasteners provide convenient installation and operation with grip tolerance and a wide range of tolerance for support panel and mounting panel thicknesses. They are available in metallic and thermoplastic constructions to | 0 | |||
| 275163 | Essentra Components | LATCH, SPRING LOADED - 12MM RO | 0 | |||
 EBV Elektronik | SGM8275-1XN5G/TR | SG Micro Corp | (Alt: SGM8275-1XN5G/TR) RoHS : Compliant | 0 | ||
| VLMU35CR40-275-120 | Vishay Intertechnologies | (Alt: VLMU35CR40-275-120) RoHS : Compliant | 0 | |||
| VLMU35CB20-275-120 | Vishay Intertechnologies | (Alt: VLMU35CB20-275-120) RoHS : Compliant | 0 | |||
| VLMU35CT20-275-120 | Vishay Intertechnologies | (Alt: VLMU35CT20-275-120) RoHS : Compliant | 0 | |||
| VLMU35CL20-275-120 | Vishay Intertechnologies | (Alt: VLMU35CL20-275-120) RoHS : Compliant | 0 | |||
| VLMU35CB21-275-120 | Vishay Intertechnologies | (Alt: VLMU35CB21-275-120) RoHS : Compliant | 0 | |||
| SST-20-WCS-B120-L2751 | Luminus Devices | LED Chip Cool White 7500K 3A 2Pin SMD TR (Alt: SST-20-WCS-B120-L2751) RoHS : Compliant | 0 | |||
 FDH Electronics | MS27510F8C | SOURIAU-SUNBANK | Backshells & Ac | 10 | ||
| MS27510B18CM | Glenair Inc | Connector RoHS : Not Compliant | 0 | |||
| MS27510B18CM | Amphenol PCD | Connector Acc |
| 0 | ||
| MS27510B24C | Amphenol PCD | Connector Acc |
| 0 | ||
| MS27510B24C | SPI Connects | Backshells & Ac |
| 0 | ||
| MS27510C16CN | Amphenol PCD | Connector Acc |
| 0 | ||
| MS27510F22A | Amphenol PCD | Connector Acc |
| 0 | ||
| MS27510F22A | SPI Connects | Backshells & Ac |
| 0 | ||
| MS27510F22A | Glenair Inc | Connector | 0 | |||
| MS27510F8C | Glenair Inc | Connector Acc | 0 | |||
| MS27510F8C | SPI Connects | Backshells & Ac |
| 0 | ||
| MS27510F8C | Amphenol PCD | Connector Acc |
| 0 | ||
| MS27510Z24CL | Amphenol PCD | Connector Acc |
| 0 | ||
| MS27511B18CL | Amphenol PCD | Connector Acc |
| 0 | ||
| MS27511C12N | Amphenol PCD | Connector Acc |
| 0 | ||
 Maritex | UCC27517DBVR | Texas Instruments | Gate Drivers; UCC27517DBVR; TEXAS INSTRUMENTS; 5; SOT-23; 4.5 V; Surface Mount RoHS : Compliant |
| 13,744 | |
| TS3A27518EPWR | Texas Instruments | Other Interface ICs; TS3A27518EPWR; TEXAS INSTRUMENTS; 24; 3.6 V; TSSOP; 1.65 V RoHS : Compliant |
| 8,950 | ||
| TS3A27518ERTWR | Texas Instruments | Other Interface ICs; TS3A27518ERTWR; TEXAS INSTRUMENTS; 24; 3.6 V; 1.65 V RoHS : Compliant |
| 5,374 | ||
| UCC27517AQDBVRQ1 | Texas Instruments | Gate Drivers; UCC27517AQDBVRQ1; TEXAS INSTRUMENTS; 5; SOT-23; 4.5 V; Surface Mount RoHS : Compliant |
| 3,904 | ||
UCC27519DBVR | Texas Instruments | Gate Drivers; UCC27519DBVR; TEXAS INSTRUMENTS; 5; SOT-23; 4.5 V; Surface Mount RoHS : Compliant |
| 2,578 | ||
| UCC27511DBVR | Texas Instruments | Gate Drivers; UCC27511DBVR; TEXAS INSTRUMENTS; 6; SOT-23; 1; Surface Mount RoHS : Compliant |
| 654 | ||
UCC27511ADBVR | Texas Instruments | Gate Drivers; UCC27511ADBVR; TEXAS INSTRUMENTS; 6; SOT-23; 4.5 V RoHS : Compliant |
| 365 | ||
| UCC27517ADBVR | Texas Instruments | Gate Drivers; UCC27517ADBVR; TEXAS INSTRUMENTS; 5; SOT-23; 1; Surface Mount RoHS : Compliant |
| 61 | ||
UCC27511AQDBVRQ1 | Texas Instruments | Gate Drivers; UCC27511AQDBVRQ1; TEXAS INSTRUMENTS; 6; SOT-23; Surface Mount; 4.5 V RoHS : Compliant |
| 1 | ||
 Master Electronics | JANMS27510B12A | Amphenol PCD | Dust Cap - JAMMS27510 - Plug - Cadmium RoHS : Compliant |
| 20 | |
| BA1-B0-34-275-121-D | Carling Technologies | BA1B034275121D RoHS : Compliant |
| 0 | ||
| RLL-49227519 | Carling Technologies | LTIG H & L-SERIES RKR SW RoHS : Compliant |
| 0 | ||
| DWM-27-51-L-D-200 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-02-06-TM-S-275-138 | Samtec Inc | FLEXIBLE SURFACE MOUNT BO RoHS : Compliant |
| 0 | ||
| TW-03-03-T-D-275-125 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-03-04-F-D-275-140 | Samtec Inc | FLEXIBLE SURFACE MOUNT BO RoHS : Compliant |
| 0 | ||
| TW-03-04-T-D-275-140 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-10-09-T-S-275-100 | Samtec Inc | Stacking Board Connector TW Series 10 Contacts Header 2 mm Through Hole 1 Rows RoHS : Compliant |
| 0 | ||
| TW-12-10-H-D-275-170 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-14-03-S-S-275-150 | Samtec Inc | Stacking Board Connector TW Series 14 Contacts Header 2 mm Through Hole 1 Rows RoHS : Compliant |
| 0 | ||
| TW-32-03-F-Q-275-100-010 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-05-05-G-D-275-167 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-08-03-G-D-275-120 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-08-05-L-D-275-145-A-P-T | Samtec Inc | RoHS : Compliant |
| 0 | ||
 Neutron USA | 2751080000 | Weidmüller Interface GmbH & Co. KG | Terminal Block Tools & Accessories SEP 2C 2.5 RoHS : Compliant |
| 50 | |
| 3-142-751 | Schurter Electronic Components | DC Power Connectors GI21 Connector Inlet, 2.6kW, 400V DC, S1, Black, Snap-in Panel, Quick Connect Terminal, IP20, Bio-based plastics RoHS : Compliant |
| 50 | ||
| 2751100000 | Weidmüller Interface GmbH & Co. KG | Terminal Block Tools & Accessories SEP 4C 2.5 RoHS : Compliant |
| 50 | ||
| 09120012751 | HARTING Technology Group | Heavy Duty Power Connectors Han Q 1/0 female axial screw insert (100A) 16...25mm 6-3AWG RoHS : Compliant |
| 22 | ||
| 09110012751 | HARTING Technology Group | Heavy Duty Power Connectors MOD FOR FEMALE CON HC MODULE RoHS : Compliant |
| 7 | ||
| 2962751 | Phoenix Contact | Terminal Block Interface Modules UM 45-D 37 SUB/S 37 POS MALSE CON RoHS : Compliant |
| 4 | ||
| XCSLE2727512 | Telemechanique Sensors | Interlock Switches Plas Inter, Lock w/ Power, 24 Vac/dc |
| 1 | ||
1412751 | Phoenix Contact | Sleeve Housing, with locking latch, 1 cable outlet, Screw M40, HC-STA-B24-HHFD-1STM40-EL-AL RoHS : Compliant |
| 0 | ||
| MBC275-1024L | Bel Power Solutions | Switching Power Supplies 275W 100-240Vin 24Vout 11.46A HEADER |
| 0 | ||
| VMS-275-12 | CUI Inc | AC/DC Power Modules 275W 12V 22.92A Med 3x5 open PCB RoHS : Compliant |
| 0 | ||
| 12751198 | WIKA Instrument LP | Pressure sensor;A-10;400 BAR;4-20MA;G1/4A;DIN;3852-E;4PLCK |
| 0 | ||
| AXG952275172 | Axiom Manufacturing | XCVR SFP CISCO COMP DWDM-SFP-5172 TAA |
| 0 | ||
| MULP275-1315 | Bel Power Solutions | AC/DC Power Modules POWER SUPPLY MULP275-1315 |
| 0 | ||
| ABC275-1058L | Bel Power Solutions | Switching Power Supplies 275W 100-240Vin 58Vout 4.74A HEADER |
| 0 | ||
| 796275-1 | TE Connectivity | Connector Housing, CPC Recept. Assy, Std Sex for Male Pins,16Pos Sz 17 Series 1 Panel Mnt RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3C2275-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length: 59.1 inches. BNC Male to N Male Right Angle Cable 59.1 Inch Length Using LMR-240 Coax., Radio frequency assembly BNC male to N male right angle cable 59.1 inch length using LMR-240 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to N male right angle cable 59.1 inch length using LMR-240 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and right angle type N cable connection on the other. Our BNC to right angle type N cable assemblies have a male gender on end 1 and male on end 2. This BNC to N type cable is a male to male coax assembly, PE3C2275-150CM, can also be known as a BNC plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. BNC plug to type N plug cable assembly PE3C2275-150CM is built with LMR-240 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency BNC male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2275-150CM can also be used in the other direction and will be right angle N type male to BNC male cable assembly if the opposite connectivity is required. BNC plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to N type cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to N male right angle cable 59.1 inch length using LMR-240 coax. |
| 1,602 | |
| PE3C2275-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length: 39.3 inches. BNC Male to N Male Right Angle Cable 39.3 Inch Length Using LMR-240 Coax., Radio frequency assembly BNC male to N male right angle cable 39.3 inch length using LMR-240 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to N male right angle cable 39.3 inch length using LMR-240 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and right angle N type cable connection on the other. Our BNC to right angle type N cable assemblies have a male gender on end 1 and male on end 2. This BNC to N type cable is a male to male coax assembly, PE3C2275-100CM, can also be known as a BNC plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. BNC plug to type N plug cable assembly PE3C2275-100CM is built with LMR-240 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency BNC male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2275-100CM can also be used in the other direction and will be right angle N type male to BNC male cable assembly if the opposite connectivity is required. BNC plug to N type right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to type N cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to N male right angle cable 39.3 inch length using LMR-240 coax. |
| 1,602 | ||
| PE3W00275-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 120 inches. N Male to TNC Male Low Loss Cable 120 Inch Length Using LMR-400-UF Coax., Radio frequency assembly N male to TNC male low loss cable 120 inch length using LMR-400-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to TNC male low loss cable 120 inch length using LMR-400-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and TNC cable connection on the other. Our low loss type N to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W00275-120 can also be known as a low loss N type plug to TNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to TNC plug cable assembly PE3W00275-120 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency type N male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W00275-120 can also be used in the other direction and will be TNC male to type N male cable assembly if the opposite connectivity is required. Low loss N type plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to TNC male low loss cable 120 inch length using LMR-400-UF coax. |
| 639 | ||
| PE3275-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Mini UHF, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male to Mini UHF Male Cable 12 Inch Length Using RG142 Coax., Radio frequency assembly SMA male to mini UHF male cable 12 inch length using RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to mini UHF male cable 12 inch length using RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to mini UHF cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and mini UHF cable connection on the other. Our SMA to mini UHF cable assemblies have a male gender on end 1 and male on end 2. This SMA to mini UHF cable is a male to male coax assembly, PE3275-12, can also be known as a SMA plug to mini UHF plug cable assembly and will be shipped same-day as it is purchased. SMA plug to mini UHF plug cable assembly PE3275-12 is built with RG142 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to mini UHF cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA male to mini UHF male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3275-12 can also be used in the other direction and will be mini UHF male to SMA male cable assembly if the opposite connectivity is required. SMA plug to mini UHF plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to mini UHF cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to mini UHF male cable 12 inch length using RG142 coax. |
| 336 | ||
| PE3FCA275-15M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM4, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: SC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 6-Fiber LC UPC to SC UPC, OM4 Multimode Distribution Cable, 5.0mm Riser, 2.0mm breakout, Aqua-15M. Pasternack’s PE3FCA275-15M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 15-meter long 6-fiber cable assembly is equipped with LC/UPC to SC/UPC connectors. Our aqua blue fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM4 fiber that supports 10Gb Ethernet up to 550 meters and 40G/100G Ethernet up to 150 meters and a bandwidth of 4700 MHz.km that delivers low attenuation and high-speed performance for mission-critical applications. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 6-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA275-15M fiber optic cable with a 5 mm cable diameter and 37 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/UPC to SC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Our fiber optic breakout assembly is designed for hyperscale data centers and telecom backbones and ensures seamless network connectivity with minimal signal loss. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM4 multimode fiber optic cable that meets your requirements. |
| 112 | ||
| PE3FCA275-10M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM4, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: SC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 6-Fiber LC UPC to SC UPC, OM4 Multimode Distribution Cable, 5.0mm Riser, 2.0mm breakout, Aqua-10M. Pasternack’s PE3FCA275-10M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long 6-fiber cable assembly is equipped with LC/UPC to SC/UPC connectors. Our aqua blue fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM4 fiber that supports 10Gb Ethernet up to 550 meters and 40G/100G Ethernet up to 150 meters and a bandwidth of 4700 MHz.km that delivers low attenuation and high-speed performance for mission-critical applications. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 6-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA275-10M fiber optic cable with a 5 mm cable diameter and 37 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/UPC to SC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Our fiber optic breakout assembly is designed for hyperscale data centers and telecom backbones and ensures seamless network connectivity with minimal signal loss. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM4 multimode fiber optic cable that meets your requirements. |
| 112 | ||
| PE3C10275-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-LLPX, RF Cable Type: LMR-400-LLPX, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Plenum N Male to SMA Male Low Loss Cable 12 Inch Length Using LMR-400-LLPX Coax with Times Microwave Components., Radio frequency assembly plenum N male to SMA male low loss cable 12 inch length using LMR-400-LLPX coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The plenum N male to SMA male low loss cable 12 inch length using LMR-400-LLPX coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a SMA cable connection on the other. Our low loss a type N to a SMA cable assembly has male gender on end 1 and male on end 2. PE3C10275-12 can also be known as a low loss type N plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PTFE (LD) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10275-12 RF cable has a Fluoropolymer jacket of 0.370-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 90 dB. Type N plug to SMA plug cable assembly PE3C10275-12 is built with LMR-400-LLPX which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to SMA cable connectors and has a 50 Ohm impedance, and is double shielded. One connector features the crimp/non-solder contact attachment method and a brass body with tri-metal plating, while the other has the crimp/solder attachment method and brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10275-12 can also be used in the other direction and will be SMA male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 26 | ||
| PE3W04275-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to MCX Jack Cable 12 Inch Length Using RG316-DS Coax., Radio frequency assembly SMA male to MCX jack cable 12 inch length using RG316-DS coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to MCX jack cable 12 inch length using RG316-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to MCX cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a MCX cable connection on the other. Our SMA to MCX cable assembly has a male gender on end 1 and a jack on end 2. PE3W04275-12 can also be known as a SMA plug to MCX female cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W04275-12 RF cable has a FEP jacket of 0.114-inch diameter. The flexible RF cable has a between series connection. SMA plug to MCX female cable assembly PE3W04275-12 is built with RG316-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to MCX cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W04275-12 can also be used in the other direction and will be a MCX jack to SMA male cable assembly if the opposite connectivity is required. SMA plug to MCX female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to MCX cable assembly for quick shipment worldwide. Variations of SMA and MCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to MCX RF cable assembly as per your requirements. |
| 0 | ||
| PE34275-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR401AL-STRAIGHT, RF Cable Type: PE-SR401AL-STRAIGHT, RF Cable Impedance: 50 Ohm, Length: 18 inches. TNC Male to TNC Male Cable 18 Inch Length Using PE-SR401AL Coax., Radio frequency assembly TNC male to TNC male cable 18 inch length using PE-SR401AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. TNC male to TNC male cable 18 inch length using PE-SR401AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and TNC cable connection on the other. Our TNC to TNC cable assemblies have a male gender on end 1 and male on end 2. This TNC to TNC cable is a male to male coax assembly, PE34275-18, can also be known as a TNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE34275-18 is built with PE-SR401AL-STRAIGHT which is a semi-rigid coax type. The Pasternack semi-rigid TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency TNC male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. TNC plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC male cable 18 inch length using PE-SR401AL coax. |
| 0 | ||
| PE38275-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male to QMA Male Cable 12 Inch Length Using RG58 Coax., Radio frequency assembly SMA male to QMA male cable 12 inch length using RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to QMA male cable 12 inch length using RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to QMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and QMA cable connection on the other. Our SMA to QMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to QMA cable is a male to male coax assembly, PE38275-12, can also be known as a SMA plug to QMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to QMA plug cable assembly PE38275-12 is built with RG58 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to QMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5 GHz maximum frequency SMA male to QMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE38275-12 can also be used in the other direction and will be QMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to QMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to QMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to QMA male cable 12 inch length using RG58 coax. |
| 0 | ||
| PE3C8275-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. 4.1/9.5 Mini DIN Female to 4.3-10 Male Low PIM Cable 100 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.1/9.5 mini DIN female to 4.3-10 male low PIM cable 100 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.1/9.5 mini DIN female to 4.3-10 male low PIM cable 100 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and 4.3-10 cable connection on the other. Our low PIM 4.1/9.5 mini DIN to 4.3-10 cable assemblies have a female gender on end 1 and male on end 2. This 4.1/9.5 mini DIN to 4.3-10 cable is a female to male coax assembly, PE3C8275-100CM, can also be known as a low PIM 4.1/9.5 mini DIN jack to 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN jack to 4.3-10 plug cable assembly PE3C8275-100CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to 4.3-10 cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.1/9.5 mini DIN female to 4.3-10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8275-100CM can also be used in the other direction and will be 4.3-10 male to 4.1/9.5 mini DIN female cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN jack to 4.3-10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.1/9.5 mini DIN female to 4.3-10 male low PIM cable 100 cm length using TFT-5G-402 coax using Times Microwave components. |
| 0 | ||
| PE3W22751 | Pasternack Enterprises | Key Specifications, Connector Series 1: Mini SMP, Connector Gender 1: Socket, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.0/2.3, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. Push-on Mini SMP Socket Bulkhead to 1.0/2.3 Jack Bulkhead Cable Using PE-P086HF Coax. PE3W22751 is a Mini SMP socket bulkhead to 1.0/2.3 jack bulkhead cable using PE-P086HF coax. This Pasternack Mini SMP socket bulkhead to 1.0/2.3 jack bulkhead cable assembly uses a 50 Ohm Mini SMP for connector 1 and a 50 Ohm 1.0/2.3 for connector 2. Our socket Mini SMP bulkhead to jack 1.0/2.3 bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W22751 Mini SMP socket bulkhead to 1.0/2.3 jack bulkhead cable assembly is constructed with PE-P086HF coax. | 0 | |||
| PE3C8275-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length: 12 inches. 4.1/9.5 Mini DIN Female to 4.3-10 Male Low PIM Cable 12 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.1/9.5 mini DIN female to 4.3-10 male low PIM cable 12 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.1/9.5 mini DIN female to 4.3-10 male low PIM cable 12 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and 4.3-10 cable connection on the other. Our low PIM 4.1/9.5 mini DIN to 4.3-10 cable assemblies have a female gender on end 1 and male on end 2. This 4.1/9.5 mini DIN to 4.3-10 cable is a female to male coax assembly, PE3C8275-12, can also be known as a low PIM 4.1/9.5 mini DIN jack to 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN jack to 4.3-10 plug cable assembly PE3C8275-12 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to 4.3-10 cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.1/9.5 mini DIN female to 4.3-10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8275-12 can also be used in the other direction and will be 4.3-10 male to 4.1/9.5 mini DIN female cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN jack to 4.3-10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.1/9.5 mini DIN female to 4.3-10 male low PIM cable 12 inch length using TFT-5G-402 coax using Times Microwave components. |
| 0 | ||
| PE3W02751 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. BNC Female 4 Hole Flange to BNC Female 4 Hole Flange Cable Using RG142 Coax. PE3W02751 is a BNC female 4 hole flange to BNC female 4 hole flange cable using RG142 coax. This Pasternack BNC female 4 hole flange to BNC female 4 hole flange cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. Our female BNC 4 hole flange to female BNC 4 hole flange cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02751 BNC female 4 hole flange to BNC female 4 hole flange cable assembly is constructed with RG142 coax. | 0 | |||
| PE3C3275-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: 10-32, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 12 inches. 10-32 Male to BNC Male Cable 12 Inch Length Using RG174 Coax., Radio frequency assembly 10-32 male to BNC male cable 12 inch length using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 10-32 male to BNC male cable 12 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 10-32 to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 10-32 cable connection on one end and BNC cable connection on the other. Our 10-32 to BNC cable assemblies have a male gender on end 1 and male on end 2. This 10-32 to BNC cable is a male to male coax assembly, PE3C3275-12, can also be known as a 10-32 plug to BNC plug cable assembly and will be shipped same-day as it is purchased. 10-32 plug to BNC plug cable assembly PE3C3275-12 is built with RG174 which is a flexible coax type. The Pasternack flexible 10-32 cable assembly is manufactured with 10-32 to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency 10-32 male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3275-12 can also be used in the other direction and will be BNC male to 10-32 male cable assembly if the opposite connectivity is required. 10-32 plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 10-32 to BNC cable assembly for quick shipment worldwide. Variations of 10-32 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 10-32 male to BNC male cable 12 inch length using RG174 coax. |
| 0 | ||
 TE Connectivity | 42751-2 | TE Connectivity | RING CRIMP 16-14 AWG TPBR Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 16 – 14 AWG Wire Size: 1.4 – 2 mm² Wire Size: 2582 – 4106 CMA Stud Size: 1/4 Closed Ring Tongue Terminal 16 – 14 AWG 1.4 – 2 mm² 2582 – 4106 CMA | Ring Terminal | Part Number: 42751-2 | Internal Number: 42751-2 | TE Connectivity RoHS : Compliant |
| 19,667 | |
| 794275-1 | TE Connectivity | 06P UMNL INTERFACE SEAL Connector Seal & Plug Type: Interface Seal Operating Temperature Range: -55 – 105 °C Operating Temperature Range: -67 – 221 °F Primary Product Color: Blue Primary Product Material: Silicone Rubber Interface Seal Max Temp: -55 – 105 °C | Connector Seal & Cavity Plug | Part Number: 794275-1 | Internal Number: 794275-1 | Alias Number: 0-0794275-1 | Blue | Silicone Rubber | TE Connectivity RoHS : Compliant |
| 11,065 | ||
| 176275-1 | TE Connectivity | UNIV POWER PLUG HSG 8P F/H Number of Positions: 8 Connector & Housing Type: Plug Connector Product Type: Housing Mating Alignment: With Mating Alignment Type: Polarization Standard Rectangular Connector | 8 Plug Housing With | Part Number: 176275-1 | Internal Number: 176275-1 | TE Connectivity RoHS : Compliant |
| 4,777 | ||
| 747275-1 | TE Connectivity | 037 LP HDF STRAIN RELIEF Strain Relief Accessory Type: Cable Stabilizer Primary Product Material: Thermoplastic Primary Product Color: Black Number of Positions: 37 UL Flammability Rating: UL 94V-0 Cable Stabilizer Thermoplastic Black 37 | Connector Strain Relief | Part Number: 747275-1 | Internal Number: 747275-1 | Alias Number: 9022383 | TE Connectivity RoHS : Compliant |
| 1,701 | ||
| 1-1776275-1 | TE Connectivity | 11P TB ,90deg,VT,3.5mm,Blue,w/interlock Number of Positions: 11 Terminal Block Connector Type: Header Connector System: Wire-to-Board Centerline (Pitch): .138 in Centerline (Pitch): 3.5 mm PCB Terminal Block | 11 Header Wire-to-Board .138" | Part Number: 1-1776275-1 | Internal Number: 1-1776275-1 | .138" | TE Connectivity RoHS : Compliant |
| 1,174 | ||
| 796275-1 | TE Connectivity | SLD CPC RCPT ASSY,17-16,STD SX Number of Positions: 16 Connector Product Type: Housing Operating Voltage: 600 VDC Connector System: Wire-to-Wire Sealable: Yes Circular Power Connector | 16 Housing 600 VDC Wire-to-Wire | Part Number: 796275-1 | Internal Number: 796275-1 | TE Connectivity RoHS : Compliant |
| 183 | ||
| 1838275-1 | TE Connectivity | M12 Fld Ser CONN. Male Pin Sldr Connector System: Cable-to-Cable Circular Connector Type: Circular Connector Plug Number of Positions: 3 Circular Connector Shell Size: 15 Sealable: Yes Cable-to-Cable Circular Connector Plug 3 15 | Standard Circular Connector | Part Number: 1838275-1 | Internal Number: 1838275-1 | TE Connectivity RoHS : Compliant |
| 1 | ||
 Vyrian | 1827512 | Phoenix Contact | Barrier Strip Terminal Block, 8A, 1.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 12,591 | ||
| LTC2751BCUHF-16#TRPBF | Analog Devices Inc | D/A Converter, 1 Func, Parallel, Word Input Loading, 2us Settling Time, PQCC38 RoHS : Compliant | 11,106 | |||
| ADM1275-1ARQZ-R7 | Analog Devices Inc | Power Supply Support Circuit, Adjustable, 1 Channel, PDSO20 RoHS : Compliant | 10,194 | |||
BQ27510DRZR-G1 | Texas Instruments | Power Supply Management Circuit, 1 Channel, PDSO12 RoHS : Compliant | 9,031 | |||
| NMUX27518EBY-Q10HP | Nexperia | RoHS : Compliant | 8,920 | |||
| 2751807 | Phoenix Contact | Microcontroller, CMOS, PQFP100 RoHS : Compliant | 8,888 | |||
| LTC2751IUHF-14-TRPBF | Analog Devices Inc | 7,930 | ||||
| UCC27517DBVT | Texas Instruments | Buffer/Inverter Based MOSFET Driver, 4A, BICMOS, PDSO5 RoHS : Compliant | 7,909 | |||
| LTC2751CUHF-14#PBF | Analog Devices Inc | D/A Converter, 1 Func, Parallel, Word Input Loading, 2us Settling Time, PQCC38 RoHS : Compliant | 7,595 | |||
| KTM2027/512 | Kingston Technology Company | 6,624 | ||||
UCC2751N | Texas Instruments | Telecom Circuit, 1-Func, BICMOS, PDIP16 RoHS : Not Compliant | 5,834 | |||
| 822275-1 | Tycon | IC Socket, PLCC44, 44 Contact(s) | 5,113 | |||
| BQ27510DRZT-G1 | Texas Instruments | Power Supply Management Circuit, 1 Channel, PDSO12 RoHS : Compliant | 3,766 | |||
| D27512-25 | Intel Corporation | UVPROM RoHS : Not Compliant | 1,926 | |||
| 66527-510 | Berg Electronics | Board Connector, 20 Contact(s), 2 Row(s), Female, Right Angle, 0.1 inch Pitch, Solder Terminal, Guide Slot, Black Insulator, Plug | 471 | |||
 Win Source Electronics | UCC27517DBVT | Texas Instruments | IC GATE DVR LOW SIDE 1CH SOT23-5 RoHS : Compliant |
| 55,240 | |
| UCC27517DBVR | Texas Instruments | Driver 4A 1-OUT Low Side Inv/Non-Inv 5-Pin SOT-23 T/R / IC GATE DVR LOW SIDE 1CH SOT23-5 RoHS : Compliant |
| 54,210 | ||
| TS3A27518ERTWR | Texas Instruments | IC MUX/DEMUX 6X1 24WQFN RoHS : Compliant |
| 54,000 | ||
| UCC27511DBVR/UCC27511DBVT | Texas Instruments |
| 50,000 | |||
UCC27516DRST | Texas Instruments | IC GATE DRVR LOW-SIDE 6SON / Low-Side Gate Driver IC Inverting, Non-Inverting 6-SON (3x3) RoHS : Compliant |
| 48,575 | ||
| UCC27519DBVT | Texas Instruments | IC GATE DVR LOW SIDE 1CH SOT23-5 RoHS : Compliant |
| 27,510 | ||
| UCC27519DBVR | Texas Instruments | IC GATE DVR LOW SIDE 1CH SOT23-5 RoHS : Compliant |
| 27,060 | ||
| BQ27510DRZT-G1 | Texas Instruments | IC LI-ION BATT FUEL GAUGE 12SON RoHS : Compliant |
| 24,840 | ||
| BQ27510DRZR-G1 | Texas Instruments | Fuel Gauge Li-Ion/Li-Pol 12-Pin VSON EP T/R / IC BATT FUEL GAUGE LI-ION 12SON RoHS : Compliant |
| 23,180 | ||
| UCC27511ADBVR | Texas Instruments | IC GATE DRVR LOW-SIDE SOT23-6 RoHS : Compliant |
| 19,423 | ||
| UCC27511ADBVR/UCC27511ADBVT | Texas Instruments |
| 18,600 | |||
| UCC27511DBVT | Texas Instruments | IC GATE DVR LOW SIDE 1CH SOT23-6 RoHS : Compliant |
| 9,675 | ||
| BQ27510DRZT | Texas Instruments | IC BATT FUEL GAUGE LI-ION 12-SON RoHS : Compliant |
| 5,740 | ||
BQ27510DRZT-G3 | Texas Instruments | System-Side Impedance Track Fuel Gauge With Direct Battery Connection RoHS : Compliant |
| 5,680 | ||
BQ27510DRZTG4 | Texas Instruments | Direct Battery Connection RoHS : Compliant |
| 5,470 | ||
 Wuhan P&S | VLMU35CT20-275-120 | Vishay Intertechnologies | UVC Emitting Diode in SMD Package RoHS : Compliant |
| 1,000 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼ 
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand