| Electronic Components Datasheet Search |
|
280ACNFMNTZCWC Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Ameya Holding Limited | F280037CSPT | Texas Instruments | RoHS : Compliant | 228,710 | ||
F280041PMS![]() | Texas Instruments | RoHS : Compliant | 65,433 | |||
| INA280A3IDCKR | Texas Instruments | RoHS : Compliant | 61,530 | |||
| F2800135RHBR | Texas Instruments | RoHS : Compliant | 23,190 | |||
| F280037SPNR | Texas Instruments | RoHS : Compliant | 22,822 | |||
| INA280A1IDCKR | Texas Instruments | RoHS : Compliant | 20,348 | |||
| MCR01SMQPF2800 | ROHM Semiconductor | 1005(0402)尺寸 大功率保证型 方形贴片电阻器(符合AEC-Q200标准) |
| 20,000 | ||
| LTR18EZPF2801 | ROHM Semiconductor | High Power Chip Resistors <Wide Terminal Type> RoHS : Compliant |
| 15,000 | ||
UCC28070QPWRQ1![]() | Texas Instruments | IC PFC CONTROLLER CCM 20TSSOP RoHS : Compliant | 4,473 | |||
UCC28019AD![]() | Texas Instruments | IC: PMIC; PFC controller; 1.5A; 65kHz; SO8; Uoper: 9.5÷21V; 0÷98% RoHS : Compliant | 3,380 | |||
UCC2808AD-1![]() | Texas Instruments | IC: PMIC; PWM controller; -0.5÷1A; 194kHz÷1MHz; Channels: 2; SO8 RoHS : Compliant | 1,395 | |||
PSMN012-80BS,118![]() | Nexperia | MOSFET N-CH 80V 74A D2PAK RoHS : Compliant | 1,281 | |||
UCC28051DR![]() | Texas Instruments | IC PFC CTRLR TRANSITION 8SOIC RoHS : Compliant | 185 | |||
| BM2LK280FJ-CE2 | ROHM Semiconductor | 车载用2ch低侧开关IPD |
| 80 | ||
| SCT2280KEC | ROHM Semiconductor | RoHS : Compliant |
| 10 | ||
![]() GLYN GmbH & Co. KG | PS2801-1P-F3-A | Renesas Electronics Corporation | Transistor Output type (DC Input) SSOP for high d | 59,500 | ||
| PS2805C-4-F3-A | Renesas Electronics Corporation | 16-pin SSOP, Tape (Large Reel) Transistor output RoHS : Compliant | 35,000 | |||
| PS2801-1L-F3-A | Renesas Electronics Corporation | Optocoupler 2.5KV TRANS 4-SSOP single CTR: L | 24,500 | |||
| PS2801-1-F3-A | Renesas Electronics Corporation | DC Input Single Transistor Output Type 4-pin SSOP RoHS : Compliant | 17,500 | |||
| ET0280D6DMA-K0 | Emerging Display Technolgies | TFT 2.8" QVGA, 500 cd/mý LED, TTL and MCU, IPS | 10,800 | |||
| PS2801C-1-F3-A | Renesas Electronics Corporation | Transistor Coupler 4-pin SSOP RoHS : Compliant | 2,400 | |||
| M01658_VGM128064G0W13 | Visionox Company | PMOLED 0,96" (128x64) color white , Driver IC SH1 | 606 | |||
| M00956_VGM128032A6Y02 | Visionox Company | PMOLED 2,23" (128x32) color yellow, Driver IC: SS | 12 | |||
| CAB-GRE-LVDS-350-CG24082801BAA | Great Ideal Co Ltd | LVDS cable, 350mm, LVDS for #29163 | 2 | |||
| M0095H_VGM128032A6M01 | Visionox Company | PMOLED 2,23" (128x32) color amber Driver IC: SSD1 | 2 | |||
| ETL0280SA0DXAN-K0 | Emerging Display Technolgies | TFT 2.8" QVGA, 1000 cd/mý LED, SPI, IPS, customiz | 1 | |||
| ET0280E5DMA*K0 | Emerging Display Technolgies | TFT 2.8" QVGA, 400 cd/mý LED, SPI, IPS | 1 | |||
| M0019H_VGM128064A6M01 | Visionox Company | PMOLED 0,96" (128x64) color amber, Driver IC: SSD | 1 | |||
![]() Interstate Connecting Components | 280 | Switchcraft Conxall | LITTEL PLUG RoHS : Compliant |
| 557 | |
| 928-004-28-09PC1A | Glenair Inc | 0 | ||||
| 752-8028-05 | TE Connectivity | 752-8028-05 | 0 | |||
| DF2806280003000 | Cinch Connectivity Solutions | 0 | ||||
| 928-001-28-09PS1A2 | Glenair Inc | 0 | ||||
| 928-004-28-09PC1A1 | Glenair Inc | 0 | ||||
| 928-006-28-09PS2A | Glenair Inc | 0 | ||||
| 928-004-28-09PC2A | Glenair Inc | 0 | ||||
| 928-005-28-09PS2A1 | Glenair Inc | 0 | ||||
| 928-005-28-09PC2A1 | Glenair Inc | 0 | ||||
| 928-003-28-09SC2A | Glenair Inc | 0 | ||||
| 928-002-28-09SC1A | Glenair Inc | 0 | ||||
| 928-001-28-09SS1A | Glenair Inc | 0 | ||||
| 928-006-28-09SC2A | Glenair Inc | 0 | ||||
| 928-004-28-09SS1A1 | Glenair Inc | 0 | ||||
![]() NexGen Digital | RK73H1ETTP2800F | KOA Speer Electronics Inc | RoHS : Compliant | 58,490 | ||
| RMCF0402FT280K | SEI Stackpole Electronics Inc | RoHS : Compliant | 10,000 | |||
MCP1702T-2802E/CB![]() | Microchip Technology Inc | RoHS : Compliant | 4,719 | |||
| PS2801C-1-F3-A | Renesas Electronics Corporation | RoHS : Compliant | 3,500 | |||
UCC2801DTR![]() | Texas Instruments | RoHS : Compliant | 2,500 | |||
| MF1/4DCT52R2801F | KOA Speer Electronics Inc | RoHS : Compliant | 2,474 | |||
632L3I007M37280![]() | CTS Corporation | RoHS : Compliant | 1,812 | |||
ULN2803A![]() | STMicroelectronics | RoHS : Compliant | 1,723 | |||
| RL-6280-3-100 | Renco Electronics Inc | RoHS : Compliant | 1,010 | |||
| NRC12F2801TRF | Nichicon Corporation | 1,000 | ||||
| EB350-02-800 | Eby Electro Inc | 330 | ||||
| BAE280800241004 | 242 | |||||
| M80-8280442 | Harwin | RoHS : Compliant | 210 | |||
| 528.0007.006 | 195 | |||||
| RT100KP280A | Microsemi FPGA & SoC (now Microchip) | 133 | ||||
![]() PEI Genesis | 280-19-28-044 | Cinch Connectivity Solutions |
| 0 | ||
| 280-19-28-071 | Cinch Connectivity Solutions |
| 0 | |||
| 280-19-28-028 | Cinch Connectivity Solutions |
| 0 | |||
| 280-19-28-029 | Cinch Connectivity Solutions |
| 0 | |||
| 280-19-28-021 | Cinch Connectivity Solutions |
| 0 | |||
| 10-497628-025 | Amphenol Corporation |
| 0 | |||
| 95-1328-09-303 | Dialight |
| 0 | |||
| S1680-2809-34-12 | SOURIAU-SUNBANK |
| 0 | |||
| S280W555-916 | Tri-Star Electronics International |
| 0 | |||
| S280W603-118 | SOURIAU-SUNBANK |
| 0 | |||
| S280W604-10 | SOURIAU-SUNBANK |
| 0 | |||
| S3684C2804A1.5-12 | SOURIAU-SUNBANK |
| 0 | |||
| S3684CR2806A2.0-12 | SOURIAU-SUNBANK |
| 0 | |||
| S3684UR2804A1.5-12 | SOURIAU-SUNBANK |
| 0 | |||
| S4173C2805R-34 | SOURIAU-SUNBANK |
| 0 | |||
![]() PUI | 12.80108 | 175,965 | ||||
| TV02W280B-HF | 15,000 | |||||
| 12.80107 | 8,500 | |||||
| 2012-1X07G00S/028/031/D | 7,015 | |||||
| 2012-1X04G00S/028/031/Q | 5,410 | |||||
| 2012-2X05G00S/028/043/J | 1,439 | |||||
| 12.80105 | 1,080 | |||||
| 2012-2X01G00S/028/052/K | 467 | |||||
| 12.85280 | 155 | |||||
| 2012-2X01G00S/028/043/J | 153 | |||||
| 2012-1X12G00S/028/054/H | 100 | |||||
| 280 | 26 | |||||
| 2012-1X01G00S/028/068/M | 16 | |||||
| 2012-1X06G01S/028/023/G | 15 | |||||
| 2012-1X03G00S028/068/M | 7 | |||||
![]() Rutronik | 528080470 | Molex | 04P FFC/FPC Non-ZIF SMT STR 1.00mm RoHS : Compliant |
| 62,000 | |
| 528081070 | Molex | 10P FFC/FPC ZIF SMT RoHS : Compliant |
| 18,000 | ||
| RC1206FR-07280RL | YAGEO Corporation | RC1206 280R 1% 0,25W TK100 RoHS : Compliant |
| 15,000 | ||
| RC0805FR-07280RL | YAGEO Corporation | RC0805 280R 1% 0,125W TK100 RoHS : Compliant |
| 15,000 | ||
| RC0402FR-07280KL | YAGEO Corporation | RC0402 280K 1% 0,063W TK100 RoHS : Compliant |
| 10,000 | ||
| MF0204FTE52-80R6 | YAGEO Corporation | MF0204 80,6R 1% 0,4W TK50 RoHS : Compliant |
| 10,000 | ||
| IPD60R280P7SE8228AUMA1 | Infineon Technologies AG | N-CH 600V 12A 280mOhm DPAK RoHS : Compliant |
| 7,500 | ||
| 528081471 | Molex | 14P FFC/FPC Non-ZIF SMT STR 1.00mm RoHS : Compliant |
| 5,000 | ||
| RC1206FR-07280KL | YAGEO Corporation | RC1206 280K 1% 0,25W TK100 RoHS : Compliant |
| 5,000 | ||
| 2ED28073J06FXUMA1 | Infineon Technologies AG | Gate-Drv 600V 0.08/0.02A DSO-8 RoHS : Compliant |
| 2,600 | ||
| Q22FA1280016614 | Seiko Epson Corporation | FA-128 25,000000M 10pF 10ppm RoHS : Compliant |
| 2,000 | ||
| IRF2807PBF | Infineon Technologies AG | N-CH 75V 82A 13mOhm TO220-3 RoHS : Compliant |
| 1,850 | ||
| IPA60R280P7SXKSA1 | Infineon Technologies AG | N-CH 650V 12A 214mOhm TO 220 FullPAK RoHS : Compliant |
| 1,000 | ||
| IPP60R280P6XKSA1 | Infineon Technologies AG | N-CH 650V 13,8A 252mOhm TO-220 RoHS : Compliant |
| 100 | ||
| ICE5AR2280CZXKLA1 | Infineon Technologies AG | CoolSET fixed freq. 800V DIP-7 RoHS : Compliant |
| 25 | ||
![]() Chip 1 Exchange | RP0402BRD0 7280RL | YAGEO Corporation | INSTOCK | 9,300 | ||
| 794280-1 | TE Connectivity | INSTOCK RoHS : Compliant | 4,734 | |||
| RK73H2ALTD2800F | KOA Speer Electronics Inc | INSTOCK RoHS : Not Compliant | 3,895 | |||
| 74F280 | INSTOCK | 1,875 | ||||
| CFS2801-03A-0021 | INSTOCK | 1,472 | ||||
| IRF2807ZPBF | STMicroelectronics | INSTOCK | 1,000 | |||
| LELK11REC452800A01 | INSTOCK | 996 | ||||
| 85LD20280.0280A | PEG | INSTOCK | 561 | |||
| Q22FA12800101## | Seiko Epson Corporation | INSTOCK | 262 | |||
| 2801-004775 | Samsung Electro-Mechanics | INSTOCK | 258 | |||
| 85LD20280.0280A | INSTOCK | 174 | ||||
| AL002806000 | INSTOCK | 95 | ||||
| PI49FCT32803QX | Pericom Semiconductor Corporation | INSTOCK | 76 | |||
ABMM2-8.000MHZ-E2-T![]() | Abracon Corporation | INSTOCK RoHS : Compliant | 50 | |||
| E02809800 | INSTOCK | 9 | ||||
![]() Chip-Germany GmbH | 60-2804-11 | Osterrath Gmbh & Co KG | 107 | |||
| ULN2803AFWG | Toshiba America Electronic Components | RoHS : Compliant | 17 | |||
| DK7828.061 INNERE EBENE | Ritmer | 8 | ||||
| M234FCN-28.000 | MtronPTI | RoHS : Compliant | 7 | |||
| FFSD-20-D-028002N | Samtec Inc | 6 | ||||
| TW-29-12-G-D-630-280 | Samtec Inc | RoHS : Compliant | 4 | |||
| C9900-K435 128079 | Beckhoff Automation GmbH | 1 | ||||
![]() DB Roberts | 0GM55-28030 | Avdel | CE EUROSERT INS M8 LF ST | 0 | ||
| 20402402801001 | Essentra Components | COMPRESSION LATCH WITH INDICAT | 0 | |||
| 85-11-280-17 | Southco | 0 | ||||
| 85-P-280-20 | Southco | 0 | ||||
| 56-280-000 | Southco | 56-280-000 | 0 | |||
| AECH10K280L | PennEngineering (PEM) | #10 | 0 | |||
| AEOS-632-80 | PennEngineering (PEM) | 0 | ||||
| D-08652800 | Avdel | COVER | 0 | |||
| 092528075TEG | Essentra Components | SLOTTED THUMB SCREW, 14-28 THR | 0 | |||
| 82-13-280-16 | Southco | The simplicity of a quarter turn is all it takes to secure panels quickly and easily with these versatile little fasteners. Numerous head styles stud lengths receptacle styles and accessories provide flexibility for accommodating many specific mountin | 0 | |||
| AEA10R280 | PennEngineering (PEM) | #10 | 0 | |||
| AEA10RB280 | PennEngineering (PEM) | #10 | 0 | |||
| AEHSS-632-80-750 | PennEngineering (PEM) | 6-32 | 0 | |||
| AELM6-632-80 | PennEngineering (PEM) | 6-32 | 0 | |||
| AES6K280 | PennEngineering (PEM) | #6 | 0 | |||
![]() ECCO | 0931028000 | ITT Interconnect Solutions |
| 289 | ||
| 217-3028-000-MS | ITT Interconnect Solutions |
| 250 | |||
| 0110628000 | ITT Interconnect Solutions |
| 106 | |||
| 011-0628-000 | ITT Interconnect Solutions |
| 106 | |||
| 97-3108B-28(0850) | Amphenol Industrial Operations |
| 92 | |||
| 97-3108B-28(0850) | Amphenol Industrial Operations |
| 92 | |||
| C10-752804-000 | Amphenol Industrial Operations |
| 90 | |||
| 97-3108A-28(0850) | Amphenol Industrial Operations |
| 72 | |||
| 97-3108A-28(0850) | Amphenol Industrial Operations |
| 72 | |||
| 10-765128-0101 | Amphenol Industrial Operations |
| 39 | |||
| DT80PW280D | TDK-Lambda Corporation |
| 10 | |||
| 97-3101A-28(0850) | Amphenol Industrial Operations |
| 4 | |||
| 97-3101A-28(0850) | Amphenol Industrial Operations |
| 4 | |||
| 97-3106B-28(0850) | Amphenol Industrial Operations |
| 3 | |||
| 2173028000 | ITT Interconnect Solutions |
| 1 | |||
![]() FDH Electronics | NAS1464B028-05C | Seastrom Mfg | Placeholder | 33 | ||
| 280-19-28-029 | Cinch Connectivity Solutions | Connector | 12 | |||
| MS91528-0C1B | Electronic Hardware Corporation (EHC) | Uncategorized |
| 12 | ||
| 08228-03 REV 01 | Connector Technology Inc | Cable Assembly | 8 | |||
| RNC60H2802FS | Vishay Intertechnologies | Other Products | 5 | |||
| 280-087S1H15MTL | Glenair Inc | Connector Misc RoHS : Compliant | 3 | |||
| 280-087S5S50MEN-429A | Glenair Inc | Connector | 2 | |||
| MS91528-0C1B | Electronic Hardware Corporation (EHC) | Placeholder | 1 | |||
| 350-2805-110 | Corsair Electrical Connectors Inc | Insert | 1 | |||
| 728038-15 | Honeywell Sensing and Control | Sensor | 0 | |||
| S280W555-510 | SOURIAU-SUNBANK | Connector Acc |
| 0 | ||
| S280W555-753 | SOURIAU-SUNBANK | Junction Module |
| 0 | ||
| S280W603-117 | SOURIAU-SUNBANK | Connector Acc | 0 | |||
| M83726/28-2802S | DRI Relays Inc | Relays | 0 | |||
| 280289-5 | TE Connectivity | Relays RoHS : Compliant | 0 | |||
![]() Flip Electronics | NCP110AFCT280T2G | onsemi | Stock, Ship Today RoHS : Compliant |
| 160,000 | |
| NCP730BMT280TBG | onsemi | Stock, Ship Today RoHS : Compliant |
| 46,551 | ||
| NCP154MX280280TAG | onsemi | Stock, Ship Today RoHS : Compliant | 42,000 | |||
| NCP161BFCT280T2G | onsemi | Stock, Ship Today RoHS : Compliant | 35,000 | |||
| NCP154MX150280TAG | onsemi | Stock, Ship Today RoHS : Compliant |
| 30,000 | ||
NCV8560SN280T1G![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 21,000 | ||
| NCP115CMX280TCG | onsemi | Stock, Ship Today RoHS : Compliant |
| 11,278 | ||
| NCP707BMX280TCG | onsemi | Stock, Ship Today RoHS : Compliant |
| 7,697 | ||
| NCP156ABFCT100280T2G | onsemi | Stock, Ship Today RoHS : Compliant |
| 4,950 | ||
| NCP161AFCS280T2G | onsemi | Stock, Ship Today RoHS : Compliant |
| 4,890 | ||
| CY22801KSXC-021 | Infineon Technologies AG | Stock, Ship Today |
| 4,293 | ||
| HMHA2801 | onsemi | Stock, Ship Today RoHS : Compliant |
| 2,945 | ||
NCP600SN280T1G![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 2,730 | ||
| HMHAA280V | onsemi | Stock, Ship Today RoHS : Compliant |
| 2,725 | ||
| 1ST280EU3F50E3VG | Altera Corporation | Stock RoHS : Compliant | 1,211 | |||
![]() Maritex | 280232 | TE Connectivity | Terminal Housings; 280232; TE CONNECTIVITY; Natural; Receptacle; Quick Connect; Straight RoHS : Compliant |
| 23,540 | |
| 280370-2 | TE Connectivity | Male Pin Headers; 280370-2; TE CONNECTIVITY; 1; Gold, Tin; 2; 2 RoHS : Compliant |
| 10,931 | ||
| ULN2803G-S18-R | Unisonic Technologies Co Ltd | Bipolar Transistors (BJT); ULN2803G-S18-R; UTC RoHS : Compliant |
| 5,749 | ||
UCC28070PWR![]() | Texas Instruments | Power Management ICs (PMICs); UCC28070PWR; TEXAS INSTRUMENTS; 20; 6.5 mm; 0 m; TSSOP RoHS : Compliant |
| 4,055 | ||
| HL-PETA-3010H233W(2800-3200K) | Hongli Zhihui Group Co LTD | LED HL-PETA-3010H233W(2800-3200K); SMD; 1204; warm white; 2800K-3200K; 600mcd/20mA; 2.8-3.4V; water clear; 120 degrees |
| 3,760 | ||
| HVH-280-4.2CF | Hirose Electric Co Ltd | Rectangular Connector Contacts; HVH-280-4.2CF; HIROSE ELECTRIC RoHS : Compliant |
| 2,606 | ||
| 508028000 | Molex | Rectangular Connector Contacts; 508028000; MOLEX; Tin; 22 AWG; Crimp; 28 AWG |
| 850 | ||
| TACTS60H130B280-JL | Jialong | Tact Switch; THT; dimensions 6.0x6.0; h=13mm; vertical; operating force 280gf; button: round |
| 500 | ||
TMS320F28027FPTT![]() | Texas Instruments | Microcontrollers (MCU); TMS320F28027FPTT; TEXAS INSTRUMENTS; 60 MHz; 12 kB; 3; 22 RoHS : Compliant |
| 241 | ||
| IRF2807ZPBF | VBsemi Electronics Co Ltd | MOSFETs; IRF2807ZPBF; VBSEMI; 75 V; 75 A; 20 V; 170 W |
| 100 | ||
| GST280A48-C6P | Mean Well | Power Supply; desktop; 280.32W; 48V; 5.84A; 85-264VAC; 120-370VDC RoHS : Compliant |
| 94 | ||
| HVH-280-2/2S-HO | Hirose Electric Co Ltd | Connectors Accessories; HVH-280-2/2S-HO; HIROSE ELECTRIC; Yes; 2 RoHS : Compliant |
| 46 | ||
| 20N*280*0.5*P7 (0.05X0.32) | KORATECH | Flexible Flat Cable; 0.50mm pitch; 20-conductors;type C; L=280mm; U=30V; oper. temper. 80deg. C |
| 13 | ||
| HLG-480H-C2800AB | Mean Well | Power supply; LED; dimming; 479W; 85-171V; 2800mA; 90-305VAC; 127-431VDC; IP65 RoHS : Compliant |
| 4 | ||
| CA17280_ELLA-30-S | LEDIL | Reflector for LED high power; angle: 12 to 22 degrees FWHM; Number of LEDs: 1; Dimensions: round 32mm; Height: 20mm; meterial: PC; Fastening: tape |
| 3 | ||
![]() Neutron USA | IC280A-R2 | Black Box Corporation | USB 2.0 EXTENDER 1PORT CATX |
| 71 | |
| 0828025.ZXISOP | Littelfuse Inc | Cartridge Fuses 1KV BOLT DOWN TERMINAL 25A RoHS : Compliant |
| 50 | ||
| 2051280000 | Weidmüller Interface GmbH & Co. KG | DIN Rail Terminal Blocks A3C 4 BL RoHS : Compliant |
| 50 | ||
| 61-9028.0 | EAO AG | EAO 61-9028.0 Accessory,Rotation Knob,Short,Non-Illuminative,Black Plastic,White Dot RoHS : Compliant |
| 50 | ||
N280-03M-BK![]() | Tripp Lite | Tripp Lite SFP 10Gbase-CU Passive Twinax Copper Cable, Black 3M (10-ft.) RoHS : Compliant |
| 50 | ||
| HLG-320H-C2800A | Mean Well | Power Supply: LED; Enclosed; 320W; 57-114V Out; 2800mA; IP65; Metal RoHS : Compliant |
| 11 | ||
| 60.12.8.024.0000 | FINDER SpA | General Purpose Relay, DPDT 10A, 24V AC coil, AgNi contact |
| 9 | ||
| CSB-M1280M1280, 75375 | Banner Engineering Corp | Banner Engineering CSB-M1280M1280 Two Branch M12 QD Splitter, 8-Pin Male to 2x 8-Pin Female, 75375, CSB Series |
| 6 | ||
| ADN-32-80-A-PPS-A | Festo | Festo ADN-32-80-A-PPS-A Cylinder, compact, ADN-32-80-A-PPS-A |
| 4 | ||
| QSH5718-41-28-055 | Analog Devices Inc | Stepper Motors QMot Stepper Motor, 57mm, 0.55Nm, 2.8A, RoHS : Compliant |
| 4 | ||
| CSB-M1280M1280 | Banner Engineering Corp | CDS EU/EU/EU 8 M/F/F ST/ST/ST DSM8X22 3GN B .054; 75375 |
| 0 | ||
| R2E180-CB28-01 | ebm-papst | Blowers AC BACKWARD-CURVED MOTORIZED IMPELLER |
| 0 | ||
| PDF700S280-CMFD-P | Cincon Electronics Corporation | Switching Power Supplies 700W 90-264Vin 28Vout 25A Cov Par RoHS : Compliant |
| 0 | ||
| S11MA7-P10MCC0-5280 | ODU Steckverbindungssysteme Gmbh & Co Kg | Circular Push Pull Connectors RoHS : Compliant |
| 0 | ||
| PH1200A280-36/T | TDK-Lambda Corporation | Isolated DC/DC Converters - Through Hole 1200W 36V 33.4A Thread |
| 0 | ||
![]() Pasternack Enterprises US | PE3W02802/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male Right Angle to TNC Male Right Angle Low Loss Cable 36 Inch Length Using LMR-240-UF Coax with HeatShrink., Radio frequency assembly SMA male right angle to TNC male right angle low loss cable 36 inch length using LMR-240-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to TNC male right angle low loss cable 36 inch length using LMR-240-UF coax with heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle SMA cable connection on one end and right angle TNC cable connection on the other. Our low loss right angle SMA to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to TNC cable is a male to male coax assembly, PE3W02802/HS-36, can also be known as a low loss right angle SMA plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC plug cable assembly PE3W02802/HS-36 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA right angle male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02802/HS-36 can also be used in the other direction and will be right angle TNC male to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to TNC male right angle low loss cable 36 inch length using LMR-240-UF coax with heatshrink. |
| 2,851 | |
| PE3W12803/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. N Male to N Male Right Angle Low Loss Cable Using LMR-400-UF Coax with HeatShrink., Radio frequency assembly N male to N male right angle low loss cable using LMR-400-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable using LMR-400-UF coax with heatshrink, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and right angle type N cable connection on the other. Our low loss N type to right angle type N cable assemblies have a male gender on end 1 and male on end 2. PE3W12803/HS can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE3W12803/HS is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W12803/HS can also be used in the other direction and will be right angle type N male to N type male cable assembly if the opposite connectivity is required. Low loss N type plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male right angle low loss cable using LMR-400-UF coax with heatshrink. | 2,130 | |||
| PE3C2805-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. TNC Male Right Angle to TNC Male Right Angle Low Loss Cable 24 Inch Length Using LMR-240 Coax., Radio frequency assembly TNC male right angle to TNC male right angle low loss cable 24 inch length using LMR-240 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to TNC male right angle low loss cable 24 inch length using LMR-240 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle TNC cable connection on one end and right angle TNC cable connection on the other. Our low loss right angle TNC to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C2805-24 can also be known as a low loss right angle TNC plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3C2805-24 is built with LMR-240 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC right angle male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss TNC right angle plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male right angle to TNC male right angle low loss cable 24 inch length using LMR-240 coax. |
| 1,674 | ||
| PE3C2809-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Male to Reverse Polarity TNC Male Low Loss Cable 36 Inch Length Using LMR-240 Coax., Radio frequency assembly N male to reverse polarity TNC male low loss cable 36 inch length using LMR-240 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to reverse polarity TNC male low loss cable 36 inch length using LMR-240 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and reverse polarity TNC cable connection on the other. Our low loss type N to reverse polarity TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C2809-36 can also be known as a low loss type N plug to reverse polarity TNC plug cable assembly and will be shipped same-day as it is purchased. N type plug to reverse polarity TNC plug cable assembly PE3C2809-36 is built with LMR-240 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency type N male to reverse polarity TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2809-36 can also be used in the other direction and will be reverse polarity TNC male to type N male cable assembly if the opposite connectivity is required. Low loss N type plug to TNC reverse polarity plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to reverse polarity TNC male low loss cable 36 inch length using LMR-240 coax. |
| 1,570 | ||
| PE3C2809-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. N Male to Reverse Polarity TNC Male Low Loss Cable 48 Inch Length Using LMR-240 Coax., Radio frequency assembly N male to reverse polarity TNC male low loss cable 48 inch length using LMR-240 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to reverse polarity TNC male low loss cable 48 inch length using LMR-240 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and reverse polarity TNC cable connection on the other. Our low loss type N to reverse polarity TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C2809-48 can also be known as a low loss type N plug to reverse polarity TNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to reverse polarity TNC plug cable assembly PE3C2809-48 is built with LMR-240 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency N type male to reverse polarity TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2809-48 can also be used in the other direction and will be reverse polarity TNC male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to TNC reverse polarity plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to reverse polarity TNC male low loss cable 48 inch length using LMR-240 coax. |
| 1,570 | ||
| PE3C2807/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-200-UF, RF Cable Type: LMR-200-UF, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Male to N Male Low Loss Cable 24 Inch Length Using LMR-200-UF Coax with Times Microwave Components with HeatShrink., Radio frequency assembly N male to N male low loss cable 24 inch length using LMR-200-UF coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 24 inch length using LMR-200-UF coax with Times Microwave components with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C2807/HS-24 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2807/HS-24 RF cable has a TPE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C2807/HS-24 is built with LMR-200-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 363 | ||
| PE3C2807/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-200-UF, RF Cable Type: LMR-200-UF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male to N Male Low Loss Cable 12 Inch Length Using LMR-200-UF Coax with Times Microwave Components with HeatShrink., Radio frequency assembly N male to N male low loss cable 12 inch length using LMR-200-UF coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 12 inch length using LMR-200-UF coax with Times Microwave components with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C2807/HS-12 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2807/HS-12 RF cable has a TPE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C2807/HS-12 is built with LMR-200-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 361 | ||
| PE3C2807/HS-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-200-UF, RF Cable Type: LMR-200-UF, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to N Male Low Loss Cable 60 Inch Length Using LMR-200-UF Coax with Times Microwave Components with HeatShrink., Radio frequency assembly N male to N male low loss cable 60 inch length using LMR-200-UF coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 60 inch length using LMR-200-UF coax with Times Microwave components with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C2807/HS-60 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2807/HS-60 RF cable has a TPE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C2807/HS-60 is built with LMR-200-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 226 | ||
| PE3C10280-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-LLPX, RF Cable Type: LMR-240-LLPX, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Plenum BNC Male to SMA Male Low Loss Cable 36 Inch Length Using LMR-240-LLPX Coax with Times Microwave Components., Radio frequency assembly plenum BNC male to SMA male low loss cable 36 inch length using LMR-240-LLPX coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The plenum BNC male to SMA male low loss cable 36 inch length using LMR-240-LLPX coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a SMA cable connection on the other. Our low loss a BNC to a SMA cable assembly has male gender on end 1 and male on end 2. PE3C10280-36 can also be known as a low loss BNC plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10280-36 RF cable has a Fluoropolymer jacket of 0.214-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 90 dB. The Pasternack BNC cable assembly is manufactured with BNC to SMA cable connectors and has a 50 Ohm impedance. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10280-36 can also be used in the other direction and will be SMA male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to SMA cable assembly for quick shipment worldwide. Variations of BNC and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 67 | ||
| PE3C10280-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-LLPX, RF Cable Type: LMR-240-LLPX, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Plenum BNC Male to SMA Male Low Loss Cable 48 Inch Length Using LMR-240-LLPX Coax with Times Microwave Components., Radio frequency assembly plenum BNC male to SMA male low loss cable 48 inch length using LMR-240-LLPX coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The plenum BNC male to SMA male low loss cable 48 inch length using LMR-240-LLPX coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a SMA cable connection on the other. Our low loss a BNC to a SMA cable assembly has male gender on end 1 and male on end 2. PE3C10280-48 can also be known as a low loss BNC plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10280-48 RF cable has a Fluoropolymer jacket of 0.214-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 90 dB. The Pasternack BNC cable assembly is manufactured with BNC to SMA cable connectors and has a 50 Ohm impedance. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10280-48 can also be used in the other direction and will be SMA male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to SMA cable assembly for quick shipment worldwide. Variations of BNC and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 50 | ||
| PE3W02803/SP-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 120 inches. TNC Male Right Angle to TNC Male Right Angle Low Loss Cable 120 Inch Length Using LMR-400-UF Coax with 180 Deg. Clock., Radio frequency assembly TNC male right angle to TNC male right angle low loss cable 120 inch length using LMR-400-UF coax with 180 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to TNC male right angle low loss cable 120 inch length using LMR-400-UF coax with 180 deg. clock, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle TNC cable connection on one end and right angle TNC cable connection on the other. Our low loss right angle TNC to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W02803/SP-120 can also be known as a low loss right angle TNC plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3W02803/SP-120 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC right angle male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss TNC right angle plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male right angle to TNC male right angle low loss cable 120 inch length using LMR-400-UF coax with 180 deg. clock. |
| 8 | ||
| PE3W12808-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SSMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SSMA Female Bulkhead to Push-On SMP Female Right Angle Low Loss Cable 24 Inch Length Using LMR-100 Coax., Radio frequency assembly SSMA female bulkhead to push-on SMP female right angle low loss cable 24 inch length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SSMA female bulkhead to push-on SMP female right angle low loss cable 24 inch length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SSMA to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SSMA bulkhead cable connection on one end and a right angle SMP cable connection on the other. Our low loss SSMA to right angle SMP cable assembly has a female gender on end 1 and a female on end 2. PE3W12808-24 can also be known as a low loss SSMA jack to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W12808-24 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SSMA jack to SMP jack cable assembly PE3W12808-24 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SSMA cable assembly is manufactured with SSMA to right angle SMP cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W12808-24 can also be used in the other direction and will be a right angle SMP female to SSMA female bulkhead cable assembly if the opposite connectivity is required. Low loss SSMA jack bulkhead to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SSMA to SMP cable assembly for quick shipment worldwide. Variations of SSMA and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SSMA to SMP low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE37280/BK/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: HN, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: HN, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm. HN Female to HN Female Cable Using RG214 Coax with HeatShrink., Pasternack’s PE37280/BK/HS HN female to HN female RF cable assembly using RG214 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The HN female to HN female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom HN cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a HN cable connection on one end and a HN cable connection on the other. Our HN to HN cable assembly has a female gender on end 1 and a female on end 2. PE37280/BK/HS can also be known as a HN jack to HN jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper as the cable’s inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE37280/BK/HS RF cable has a pvc jacket of 0.425-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -20 to 80 degrees C. The flexible RF cable has an in-series connection. Our HN female to HN female cable has a maximum VSWR of 1.4:1. This PE37280/BK/HS HN jack to HN jack cable assembly is built with RG214, which is a flexible coax type. The Pasternack flexible HN cable assembly is manufactured with HN to HN cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. This HN jack to HN jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality HN to HN cable assembly for quick shipment worldwide. Variations of HN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal HN to HN RF cable assembly as per your requirements. | 0 | |||
| PE3C6280 | Pasternack Enterprises | Key Specifications, Connector Series 1: C, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. C Male to TNC Male Cable Using RG142 Coax., Radio frequency assembly C male to TNC male cable using RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. C male to TNC male cable using RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type C to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with C type cable connection on one end and TNC cable connection on the other. Our type C to TNC cable assemblies have a male gender on end 1 and male on end 2. This type C to TNC cable is a male to male coax assembly, PE3C6280, can also be known as a C type plug to TNC plug cable assembly and will be shipped same-day as it is purchased. Type C plug to TNC plug cable assembly PE3C6280 is built with RG142 which is a flexible coax type. The Pasternack flexible C cable assembly is manufactured with type C to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency type C male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6280 can also be used in the other direction and will be TNC male to C type male cable assembly if the opposite connectivity is required. Type C plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality C type to TNC cable assembly for quick shipment worldwide. Variations of type C cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this C male to TNC male cable using RG142 coax. | 0 | |||
| PE3W02800 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50. SMA Male to TNC Male Right Angle Cable Using LMR-400 Coax. PE3W02800 is a SMA male to TNC male right angle cable using LMR-400 coax. This Pasternack SMA male to TNC male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. SMA to TNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA to male TNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02800 SMA male to TNC male right angle cable assembly is constructed with LMR-400 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
![]() TE Connectivity | 42801-1 | TE Connectivity | 187 FASTON REC 20-16 AWG BR Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 20 – 16 AWG Wire Size: .51 – 1.31 mm² Mating Tab Width: 4.75 mm Receptacle Uninsulated 20 – 16 AWG .51 – 1.31 mm² | Quick Disconnect | Part Number: 42801-1 | Internal Number: 42801-1 | TE Connectivity RoHS : Compliant |
| 52,705 | |
| 42800-2 | TE Connectivity | 187 FASTON REC 20-16 AWG TPBR Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 20 – 16 AWG Wire Size: .51 – 1.31 mm² Mating Tab Width: 4.75 mm Receptacle Uninsulated 20 – 16 AWG .51 – 1.31 mm² | Quick Disconnect | Part Number: 42800-2 | Internal Number: 42800-2 | TE Connectivity RoHS : Compliant |
| 10,372 | ||
| 280368 | TE Connectivity | AMPMODU II REC. HSG, DUAL ROW, 30 POS. Number of Positions: 30 Connector & Housing Type: Receptacle Connector Product Type: Housing Mating Retention: With Mating Retention Type: Detent Latching Standard Rectangular Connector | 30 Receptacle Housing With | Part Number: 280368 | Internal Number: 280368 | TE Connectivity RoHS : Compliant |
| 7,996 | ||
| 794280-1 | TE Connectivity | 12P UMNL WIRE SEAL Connector Seal & Plug Type: Wire Seal Operating Temperature Range: -55 – 105 °C Operating Temperature Range: -67 – 221 °F Primary Product Color: Blue Primary Product Material: Silicone Rubber Wire Seal Max Temp: -55 – 105 °C | Connector Seal & Cavity Plug | Part Number: 794280-1 | Internal Number: 794280-1 | Blue | Silicone Rubber | TE Connectivity RoHS : Compliant |
| 6,314 | ||
| 280615-2 | TE Connectivity | MOD I INCREMENTAL ASSY PCB Connector Type: PCB Mount Header PCB Mount Orientation: Right Angle Connector System: Board-to-Board Number of Positions: 2 Number of Rows: 1 PCB Mount Header Right Angle Board-to-Board 2 | PCB Header & Receptacle | Part Number: 280615-2 | Internal Number: 280615-2 | TE Connectivity RoHS : Compliant |
| 3,609 | ||
| 280617-1 | TE Connectivity | 06P MOD 1 P.S.ASSY PCB Connector Type: PCB Mount Header PCB Mount Orientation: Right Angle Connector System: Board-to-Board Number of Positions: 6 Number of Rows: 1 PCB Mount Header Right Angle Board-to-Board 6 | PCB Header & Receptacle | Part Number: 280617-1 | Internal Number: 280617-1 | TE Connectivity RoHS : Compliant |
| 2,699 | ||
| 280374-1 | TE Connectivity | 10P AMPMODU II SHRD HDR, ST, TIN PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Board-to-Board Board-to-Board Configuration: Mezzanine (Stacking) Number of Positions: 10 PCB Mount Header Vertical Board-to-Board Mezzanine (Stacking) | PCB Header & Receptacle | Part Number: 280374-1 | Internal Number: 280374-1 | TE Connectivity RoHS : Compliant |
| 1,746 | ||
| 2404280-6 | TE Connectivity | EP 2.5 HDR, GLOW WIRE, 6P PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 6 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 6 | PCB Header & Receptacle | Part Number: 2404280-6 | Internal Number: 2404280-6 | TE Connectivity RoHS : Compliant |
| 1,556 | ||
| 280508-2 | TE Connectivity | 9P AMPMODU II SHRD HDR, ST, 0.38AU PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Board-to-Board Wire-to-Board Board-to-Board Configuration: Mezzanine (Stacking) Number of Positions: 9 PCB Mount Header Vertical Board-to-Board Mezzanine (Stacking) | PCB Header & Receptacle | Part Number: 280508-2 | Internal Number: 280508-2 | TE Connectivity RoHS : Compliant |
| 926 | ||
| 280372-2 | TE Connectivity | 6P AMPMODU II SHRD HDR, ST, 0.38AU PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Board-to-Board Wire-to-Board Board-to-Board Configuration: Mezzanine (Stacking) Number of Positions: 6 PCB Mount Header Vertical Board-to-Board Mezzanine (Stacking) | PCB Header & Receptacle | Part Number: 280372-2 | Internal Number: 280372-2 | TE Connectivity RoHS : Compliant |
| 512 | ||
| 280232-8 | TE Connectivity | 250 FASTON POST INS.,REC.,1 POS,NATRUAL Insulation Boot & Sleeve Product Type: Insulation Sleeve Terminal Orientation: Straight Compatible Insulation Diameter (Max): 4.4 mm Compatible Insulation Diameter (Max): .173 in Compatible Insulation Diameter Range: .173 in Insulation Sleeve Straight 4.4 mm .173" | Insulation Boots & Sleeve | Part Number: 280232-8 | Internal Number: 280232-8 | TE Connectivity RoHS : Compliant |
| 494 | ||
| RP73PF2A280RBTDF | TE Connectivity | RP 2A 0.25W 280R 0.1% 25PPM 1K RL Resistance Value: 280 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0805 Surface Mount Resistor | 280 Ω Thin Film Precision Resistor .1 % | Part Number: RP73PF2A280RBTDF | Internal Number: 6-2176091-6 | TE Connectivity RoHS : Compliant |
| 372 | ||
| 4828-008-8605 | TE Connectivity | BKSHL, 86P, BLK, HORIZONTAL, DRCP Primary Product Color: Black Protection & Strain Relief Accessory Type: Cover Primary Product Material: Nylon 6/6 Operating Temperature (Max): 125 °C Operating Temperature (Max): 257 °F Black Cover | Automotive Connector Cap & Cover | Part Number: 4828-008-8605 | Internal Number: 4828-008-8605 | Nylon 6/6 | TE Connectivity RoHS : Compliant |
| 49 | ||
| T4052228003-002 | TE Connectivity | RPC-M8-3MR-1.0-M12-3FR-PUR Cable Assembly Type: M8 to M12 Number of Positions: 3 Cable Assembly Length: 1 m Cable Assembly Length: 3.2 ft M8/M12 Application Type: Sensor/Actuator M8 to M12 3 1 m 3.2 ft | M8 Male R/a To M12 Female R/a Cable Assembly | Part Number: T4052228003-002 | Internal Number: T4052228003-002 | TE Connectivity RoHS : Compliant |
| 30 | ||
| FN3280H-80-35-R69 | TE Connectivity | FN3280H-80-35-R69 Current Rating: 80 A Input Termination Type: Terminal Block Output Termination Type: Terminal Block Wiring Configuration: WYE (4 wire + ground) Operating Voltage: 520 VAC 3-Phase Filters & High-End Line Filter For Industrial Machinery And Equipment | 80 A Terminal Block WYE (4 wire + ground) | Part Number: FN3280H-80-35-R69 | Internal Number: 822029-SF | FN3280H-80-35-R69 Current Rating: 80 A Input Termination Type: Terminal Block Output Termination Type: Terminal Block Wiring Configuration: WYE (4 wire + ground) Operating Voltage: 520 VAC 3-Phase Filters & High-End Line Filter For Industrial Machinery And Equipment | 80 A Terminal Block WYE (4 wire + ground) | Part# FN3280H-80-35-R69 RoHS : Compliant |
| 1 | ||
![]() Teledyne HiRel | 5962-9152802MYA | Teledyne HiRel | OR/NOR GATE, QUINT 2-INPUT RoHS : Not Compliant | 0 | ||
| 5962-8762801SA | Teledyne HiRel | FLIP-FLOP, D-TYPE, 8-BIT, WITH NONINVERTING 3-STATE OUTPUTS, TTL-COMP. INPUTS RoHS : Not Compliant | 0 | |||
| 5962-9152802MXA | Teledyne HiRel | OR/NOR GATE, QUINT 2-INPUT RoHS : Not Compliant | 0 | |||
| 5962-9152801MYA | Teledyne HiRel | OR/NOR GATE, TRIPLE 5-INPUT RoHS : Not Compliant | 0 | |||
5962-8762801RA![]() | Teledyne HiRel | FLIP-FLOP, D-TYPE, 8-BIT, WITH NONINVERTING 3-STATE OUTPUTS, TTL-COMP. INPUTS RoHS : Not Compliant | 0 | |||
| 54F280FMQB | Teledyne HiRel | PARITY GENERATOR/CHECKER, 9-BIT | 0 | |||
| 5962-8762802SA | Teledyne HiRel | FLIP-FLOP, D-TYPE, 8-BIT, WITH NONINVERTING 3-STATE OUTPUTS, TTL-COMP. INPUTS RoHS : Not Compliant | 0 | |||
| 5962-9452801QXA | Teledyne HiRel | FLIP-FLOP, D-TYPE, 16-BIT, TS RoHS : Not Compliant | 0 | |||
5962-8762802RA![]() | Teledyne HiRel | FLIP-FLOP, D-TYPE, 8-BIT, WITH NONINVERTING 3-STATE OUTPUTS, TTL-COMP. INPUTS RoHS : Not Compliant | 0 | |||
| 54F280LMQB | Teledyne HiRel | PARITY GENERATOR/CHECKER, 9-BIT | 0 | |||
| 54F280DMQB | Teledyne HiRel | PARITY GENERATOR/CHECKER, 9-BIT | 0 | |||
5962-87628022A![]() | Teledyne HiRel | FLIP-FLOP, D-TYPE, 8-BIT, WITH NONINVERTING 3-STATE OUTPUTS, TTL-COMP. INPUTS RoHS : Not Compliant | 0 | |||
| 5962-9152801MXA | Teledyne HiRel | OR/NOR GATE, TRIPLE 5-INPUT RoHS : Not Compliant | 0 | |||
| 5962-87628012A | Teledyne HiRel | FLIP-FLOP, D-TYPE, 8-BIT, WITH NONINVERTING 3-STATE OUTPUTS, TTL-COMP. INPUTS RoHS : Not Compliant | 0 | |||
![]() Venkel Ltd. | PWCR0402-AK-2802DT | VENKEL LTD | Pulse Withstanding CR;0402;1/5W;�100PPM;28K;�0.5% RoHS : Compliant | 0 | ||
| PWCR0805-TK-2800FT | VENKEL LTD | Pulse Withstanding CR;0805;1/4W;�100PPM;280R;�1% RoHS : Compliant | 0 | |||
| PWCR1206-VK-2802FT | VENKEL LTD | Pulse Withstanding CR;1206;1/2W;�100PPM;28K;�1% RoHS : Compliant | 0 | |||
| AGCR0402-RK-2803DT | VENKEL LTD | Auto Grade Resistor;0402;1/8W;�100PPM;280K;�0.5% RoHS : Compliant | 0 | |||
| AGCR0603-QL-2804FT | VENKEL LTD | Auto Grade Resistor;0603;1/10W;�200PPM;2.8M;�1% RoHS : Compliant | 0 | |||
| HPCR0603-T-2802FT | VENKEL LTD | High Power CR;0603;1/4W;28K;�1% RoHS : Compliant | 0 | |||
| HPTF0603-QE-2802UT | VENKEL LTD | High Power Thin Film CR;0603;1/10W;�25PPM;28K;�0.01% RoHS : Compliant | 0 | |||
| HPTF0603-SE-2802AT | VENKEL LTD | High Power Thin Film CR;0603;1/6W;�25PPM;28K;�0.05% RoHS : Compliant | 0 | |||
| HPTF0805-RN-2803BT | VENKEL LTD | High Power Thin Film CR;0805;1/8W;�10PPM;280K ;�0.1% RoHS : Compliant | 0 | |||
| HPTF0805-TC-2803CT | VENKEL LTD | High Power Thin Film CR;0805;1/4W;�50PPM;280K ;�0.25% RoHS : Compliant | 0 | |||
| HPTF0805-TE-2801CT | VENKEL LTD | High Power Thin Film CR;0805;1/4W;�25PPM;2.8K;�0.25% RoHS : Compliant | 0 | |||
| HPTF1206-TP-2800CT | VENKEL LTD | High Power Thin Film CR;1206;1/4W;�5PPM;280R;�0.25% RoHS : Compliant | 0 | |||
| HPTF1210-UN-2801FT | VENKEL LTD | High Power Thin Film CR;1210;1/3W;�10PPM;2.8K;�1% RoHS : Compliant | 0 | |||
| HPTF2010-UN-2802FT | VENKEL LTD | High Power Thin Film CR;2010;1/3W;�10PPM;28K;�1% RoHS : Compliant | 0 | |||
| HPTF2010-UP-2800FT | VENKEL LTD | High Power Thin Film CR;2010;1/3W;�5PPM;280R;�1% RoHS : Compliant | 0 | |||
![]() Wuhan P&S | NCP115AMX280TCG | onsemi | - RoHS : Compliant |
| 5,000 | |
| 10145028-030LF | Amphenol FCi | Wire-to-board connector, socket, 30 positions, left and right double row |
| 5,000 | ||
| HMHA2801R2 | onsemi | Phototransistor Optocouplers RoHS : Compliant |
| 2,500 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |