| Electronic Components Datasheet Search |
|
2951-S08-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() TME | 1982295-1 | TE Connectivity | Connector: wire-board; plug; male; Automotive; 40A; 500V; PIN: 2 RoHS : Compliant |
| 77,040 | |
| 1329511 | Phoenix Contact | Splice terminal: rail; XT; 41A; 1kV; PA; L: 57.6mm; 0.5÷10mm2; ways: 1 RoHS : Compliant |
| 40 | ||
| KC90_12-95/1 | ERKO | Tip: ring tube; M12; 95mm2; crimped; for cable; angled 90°; tinned |
| 20 | ||
| 102951 | MCI Transformer Corporation | Patch cord; F/UTP; Cat 6; RJ45 plug,RJ45 up angled plug; 2m; Cu |
| 0 | ||
| 600-02951 | HellermannTyton | Insulating tubing; chloroprene; black |
| 0 | ||
| 2951797 | Gedore Torque Ltd | Pliers: set; cutting,adjustable,half-rounded nose; 3pcs. |
| 0 | ||
LP2951-33QDRGRQ1![]() | Texas Instruments | IC: voltage regulator; LDO,fixed; 3.3V; 0.1A; WSON8; SMD; reel,tape RoHS : Compliant |
| 0 | ||
LP2951CDMR2G![]() | onsemi | IC: voltage regulator; LDO,linear,adjustable; 1.25÷29V; 0.1A RoHS : Compliant |
| 0 | ||
LP2951ACMX/NOPB![]() | Texas Instruments | IC: voltage regulator; LDO,adjustable; 1.24÷29V; 0.1A; SO8; SMD RoHS : Compliant |
| 0 | ||
| 1912951 | Phoenix Contact | Connector: pluggable terminal block; plug; power supply; 16A RoHS : Compliant |
| 0 | ||
| 81-295-1-S | NEO TOOLS | Dungarees; Size: S; black; Mix&Match; slim; 230g/m2 |
| 0 | ||
| 81-295-1-XXXL | NEO TOOLS | Dungarees; Size: XXXL; black; Mix&Match; slim; 230g/m2 |
| 0 | ||
| 871295-1 | TE Connectivity | Mandrel; Maxi Termi Point RoHS : Compliant |
| 0 | ||
| 1092951000 | Weidmüller Interface GmbH & Co. KG | 1092951000 RoHS : Compliant |
| 0 | ||
| 0295100.MXJ | Littelfuse Inc | Fuse: fuse; 22.8x16.2x22mm; automotive; screw; 100A; 32VDC; 295 RoHS : Compliant |
| 0 | ||
![]() Avnet Americas | NCV2951CDR2G![]() | onsemi | LDO Regulator, 100 mA, Ultra-Low Iq Vout: 5.0 V or Adj; ?1.0%. - Tape and Reel (Alt: NCV2951CDR2G) RoHS : Compliant |
| 245,000 | |
LP2951ACDR2G![]() | onsemi | LDO Regulator, 100 mA, 30V, Micropower, with Shutdown Vout: 5.0 or Adj.; 0.5%. - Tape and Reel (Alt: LP2951ACDR2G) RoHS : Compliant |
| 202,500 | ||
LP2951CD-3.3R2G![]() | onsemi | LDO Regulator, 100 mA, 30V, Micropower, with Shutdown Vout: 3.3 V; 1.0%. - Tape and Reel (Alt: LP2951CD-3.3R2G) RoHS : Compliant |
| 50,000 | ||
LP2951ACD-3.3R2G![]() | onsemi | LDO Regulator, 100 mA, 30V, Micropower, with Shutdown Vout: 3.3 V; 0.5%. - Tape and Reel (Alt: LP2951ACD-3.3R2G) RoHS : Compliant |
| 10,000 | ||
LP2951CD-3.0R2G![]() | onsemi | LDO Regulator, 100 mA, 30V, Micropower, with Shutdown Vout: 3.0 V; 1.0%. - Tape and Reel (Alt: LP2951CD-3.0R2G) RoHS : Compliant |
| 5,000 | ||
| M39029/5-116 | TE Connectivity | Circular Connector Contact, MIL-C-83723 Series III, Miniature Cylindrical Series, Socket, Crimp - Bulk (Alt: M39029/5-116) RoHS : Not Compliant |
| 3,434 | ||
| LP2951CS-L-5-0/TR | MaxLinear Inc | LDO Voltage Regulator, Fixed, 2.4 V to 30 V, Single, 380 mV Drop, 5 V, 100 mA,8 Pins, SOIC - Tape and Reel (Alt: LP2951CS-L-5-0/TR) RoHS : Compliant |
| 2,500 | ||
| M39029/5-117 | Amphenol Corporation | Contact SKT Crimp ST Cable Mount - Bulk (Alt: M39029/5-117) RoHS : Compliant |
| 1,580 | ||
| M39029/5-115 | TE Connectivity | Circular Connector Contact, Miniature Cylindrical Series, Socket, Crimp, 20 AWG, 24 AWG - Bag (Alt: 100503L) RoHS : Not Compliant |
| 117 | ||
| 74752-9510 | Molex | - Bulk (Alt: 0747529510) RoHS : Compliant |
| 3 | ||
| HW-02-08-F-S-295-117 | Samtec Inc | - Bulk (Alt: HW-02-08-F-S-295-117) RoHS : Compliant |
| 0 | ||
| JANTXV1N5295-1 | Microchip Technology Inc | - Bulk (Alt: JANTXV1N5295-1) RoHS : Not Compliant |
| 0 | ||
| JANTXV1N5295-1 | VPT Components | - Bulk (Alt: JANTXV1N5295-1) RoHS : Not Compliant |
| 0 | ||
| 8-461295-1 | TE Connectivity | - Bag (Alt: 8-461295-1) RoHS : Not Compliant | 0 | |||
| FW-10-02-LM-D-295-155 | Samtec Inc | - Bulk (Alt: FW-10-02-LM-D-295-155) RoHS : Compliant |
| 0 | ||
![]() Newark | TW-03-04-G-S-295-160 | Samtec Inc | Conn Stack Brd, 2Mm, 3Pos, Hdr; |Samtec, Inc. TW-03-04-G-S-295-160 RoHS : Compliant |
| 1,109 | |
| ZW-07-15-T-D-295-100 | Samtec Inc | Conn Stack Brd, 2.54Mm, 14Pos, Hdr; |Samtec, Inc. ZW-07-15-T-D-295-100 RoHS : Compliant |
| 445 | ||
| TW-08-03-T-S-295-120 | Samtec Inc | Conn Stack Brd, 2Mm, 8Pos, Hdr; |Samtec, Inc. TW-08-03-T-S-295-120 RoHS : Compliant |
| 397 | ||
| 10.4265+10.4295+10.4200+10.421 | Lapp Group | Rectangular Power Connector, Coupler Kit; |Lapp 10.4265+10.4295+10.4200+10.421 RoHS : Compliant |
| 387 | ||
| TW-09-04-G-S-295-100 | Samtec Inc | Conn Stack Brd, 2Mm, 9Pos, Hdr; |Samtec, Inc. TW-09-04-G-S-295-100 RoHS : Compliant |
| 385 | ||
| TW-04-05-LM-D-295-100 | Samtec Inc | Conn Stack Brd, 2Mm, 8Pos, Hdr; |Samtec, Inc. TW-04-05-LM-D-295-100 RoHS : Compliant |
| 309 | ||
| TW-04-04-L-D-295-140 | Samtec Inc | Conn Stack Brd, 2Mm, 8Pos, Hdr; |Samtec, Inc. TW-04-04-L-D-295-140 RoHS : Compliant |
| 294 | ||
| TW-05-04-L-D-295-140 | Samtec Inc | Conn Stack Brd, 2Mm, 10Pos, Hdr; |Samtec, Inc. TW-05-04-L-D-295-140 RoHS : Compliant |
| 271 | ||
| TW-06-05-G-D-295-150 | Samtec Inc | Conn Stack Brd, 2Mm, 12Pos, Hdr; |Samtec, Inc. TW-06-05-G-D-295-150 RoHS : Compliant |
| 259 | ||
| TW-13-05-L-D-295-150 | Samtec Inc | Conn Stack Brd, 2Mm, 26Pos, Hdr; |Samtec, Inc. TW-13-05-L-D-295-150 RoHS : Compliant |
| 131 | ||
| TMS-129-51-G-S | Samtec Inc | Hdr, Brd-To-Brd, 1.27Mm, 29Pos; |Samtec, Inc. TMS-129-51-G-S RoHS : Compliant |
| 90 | ||
LP2951ACM/NOPB![]() | Texas Instruments | Adjustable Ldo Voltage Regulator, 1.24V; |Texas Instruments LP2951ACM/NOPB RoHS : Compliant |
| 55 | ||
LP2951ACN-3.3G![]() | onsemi | Ldo Voltage Regulator, 3.3V, 0.1A, 8-Dip; Output Type:Fixed; Input Voltage Min:4.3V; Input Voltage Max:30V; No. Of Outputs:1Outputs; Output Voltage - Nom:3.3V; Output Voltage Min:-; Output Voltage Max:-; Polarity:Positive Output Rohs Compliant: Yes RoHS : Compliant |
| 20 | ||
| FMCA2951-36 | Fairview Microwave Inc | Sma Male-Sma Female 2 Hole Flange Cbl; |Fairview Microwave FMCA2951-36 RoHS : Not Compliant |
| 5 | ||
| FMCA2951-60 | Fairview Microwave Inc | Sma Male-Sma Female 2 Hole Flange Cbl; |Fairview Microwave FMCA2951-60 RoHS : Not Compliant |
| 3 | ||
![]() Analog Devices Inc | LTC2951CDDB-2#TRMPBF | Analog Devices Inc | PB On/Off Cntr RoHS : Compliant |
| 14,500 | |
| LTC2951CDDB-1#TRMPBF | Analog Devices Inc | PB On/Off Cntr RoHS : Compliant |
| 5,558 | ||
| LTC2951ITS8-1#TRPBF | Analog Devices Inc | PB On/Off Cntr RoHS : Compliant |
| 5,000 | ||
| LTC2951ITS8-2#TRPBF | Analog Devices Inc | PB On/Off Cntr RoHS : Compliant |
| 5,000 | ||
| LTC2951CTS8-2#TRMPBF | Analog Devices Inc | PB On/Off Cntr RoHS : Compliant |
| 2,510 | ||
| LTC2951CTS8-2#TRPBF | Analog Devices Inc | PB On/Off Cntr RoHS : Compliant |
| 2,500 | ||
| LTC2951CTS8-1#TRMPBF | Analog Devices Inc | PB On/Off Cntr RoHS : Compliant |
| 1,178 | ||
| LTC2951ITS8-2#TRMPBF | Analog Devices Inc | PB On/Off Cntr RoHS : Compliant |
| 1,118 | ||
| DC2951A | Analog Devices Inc | LTC7806 Demo Bd, 6-30VIN/24VOU RoHS : Compliant |
| 214 | ||
| LTC2951IDDB-2#TRMPBF | Analog Devices Inc | PB On/Off Cntr RoHS : Compliant |
| 0 | ||
| LTC2951CDDB-1#TRPBF | Analog Devices Inc | PB On/Off Cntr RoHS : Compliant |
| 0 | ||
| LTC2951CDDB-2#TRPBF | Analog Devices Inc | PB On/Off Cntr RoHS : Compliant |
| 0 | ||
| LTC2951CTS8-1#TRPBF | Analog Devices Inc | PB On/Off Cntr RoHS : Compliant |
| 0 | ||
| LTC2951IDDB-2#TRPBF | Analog Devices Inc | PB On/Off Cntr RoHS : Compliant |
| 0 | ||
| LTC2951IDDB-1#TRPBF | Analog Devices Inc | PB On/Off Cntr RoHS : Compliant |
| 0 | ||
![]() RS | M39029/5-118 | TE Connectivity | CONTACT SOCKET ASSYEMBLY, 100505L, CRIMPED CONTACT SERIES RoHS : Compliant |
| 214 | |
| NL2951WL2R | Arcolectric | PANEL MOUNT INDICATOR NEON 110V RED |
| 139 | ||
| M39029/5-116 | TE Connectivity | CONTACT SOCKET ASSYEMBLY, 100504L, CRIMPED CONTACT SERIES RoHS : Compliant |
| 100 | ||
| M39029/5-117 (65-54757) | Amphenol Sine Systems | FEMALE CONTACT, DIAGNOSTICS, SIZE 16, WIRE GAUGE 20 AWG, DIAGNOSTICGRADE SERIES |
| 14 | ||
| 412951 | ELESA USA | DVA.4-70-55-M10-28-55, RUBBER BUFFERS, STEEL BASE PLATE |
| 8 | ||
| RSMV 4-RKMV 4-295/1 M | Lumberg Automation | CORDSET, M8 MALE STRAIGHT TO FEMALE STRAIGHT, 4 POLE, 1 METER, PVC, BLACK, 4253 |
| 7 | ||
| RKT 4-295/1M (600006907) | Lumberg Automation | M12 SINGLE-ENDED CORDSET, FEMALE, 4-PIN, 230VAC/DC, 4A, 1M, PVC BLACK, 60000690 |
| 6 | ||
| 7295148 | RS Pro | PHOTOELECTRIC SENSOR REFLECTIVE PNP DIFFUSE 0.04-1M 30V 100MA LED M12 UL |
| 3 | ||
| 82951068 | WERMA SIGNALTECHNIK GMBH + CO KG | BEACON;LED;ROTATING;115-230VAC;BASE MOUNT;BLUE |
| 3 | ||
| 19300102295 (19 30 010 2295) | HARTING Technology Group | LOW CONSTRUCTION, 10B, SIDE ENTRY, SINGLE LEVER, IP65, 2X M20, HAN B SERIES |
| 3 | ||
| 7295167 | RS Pro | PHOTOELECTRIC SENSOR THROUGH BEAM EMITTER PNP 20M 30V 100MA LED M12 |
| 2 | ||
| 8462951 | RS Pro | DIE CAST ALUMINUM GENERAL PURPOSE ENCLOSURE 14.2 X 6.3 X 3.5IN (360X160X90MM) |
| 1 | ||
| 3122951 | RS Pro | IP67 DUCT MOUNT TEMP TRANSMITTER 4-20MA |
| 1 | ||
| 7295182 | RS Pro | PHOTOELECTRIC SENSOR BACKGROUND SUPPRESSION NPN 0.01-0.14M 24V LED |
| 1 | ||
| 2951 | Heyco | BUSHING, WHITE, OCSB SERIES |
| 0 | ||
![]() Microchip Technology Inc | MIC2951-02YM-TR | Microchip Technology Inc | Improved LP2951 Low Drop-out Regulator, SOIC, Projected EOL: 2036-03-16 RoHS : Compliant |
| 17,500 | |
| MIC2951-3.3YM | Microchip Technology Inc | Improved LP2951 Low Drop-out Regulator, SOIC, Projected EOL: 2036-03-15 RoHS : Compliant |
| 15,127 | ||
| LP2951-03YM | Microchip Technology Inc | Low Drop Out Regulator, SOIC, Projected EOL: 2036-08-11 RoHS : Compliant |
| 9,210 | ||
| MIC2951-03YN | Microchip Technology Inc | Improved LP2951 Low Drop-out Regulator, PDIP, Projected EOL: 2036-10-04 RoHS : Compliant |
| 8,950 | ||
| MIC2951-03YMM | Microchip Technology Inc | Improved LP2951 Low Drop-out Regulator, MSOP, Projected EOL: 2036-01-04 RoHS : Compliant |
| 7,445 | ||
| MIC2951-02YM | Microchip Technology Inc | Improved LP2951 Low Drop-out Regulator, SOIC, Projected EOL: 2036-04-21 RoHS : Compliant |
| 6,264 | ||
| LP2951-02YN | Microchip Technology Inc | Low Drop Out Regulator, PDIP, Projected EOL: 2036-08-20 RoHS : Compliant |
| 5,400 | ||
| MIC2951-03YMM-TR | Microchip Technology Inc | Improved LP2951 Low Drop-out Regulator, MSOP, Projected EOL: 2036-05-04 RoHS : Compliant |
| 5,025 | ||
| MIC29510-3.3WT | Microchip Technology Inc | 5.0A LDO Fixed Voltage, TO-220, Projected EOL: 2036-02-14 RoHS : Compliant |
| 3,270 | ||
| MIC29510-5.0WT | Microchip Technology Inc | 5.0A LDO Fixed Voltage, TO-220, Projected EOL: 2036-05-04 RoHS : Compliant |
| 1,950 | ||
| MIC29512WT | Microchip Technology Inc | 5.0A LDO Adj. + Shutdown, TO-220, Projected EOL: 2036-01-16 RoHS : Compliant |
| 1,553 | ||
| LP2951-02YM-TR | Microchip Technology Inc | Low Drop Out Regulator, SOIC, Projected EOL: 2036-06-09 RoHS : Compliant |
| 1,050 | ||
| LP2951-02YM | Microchip Technology Inc | Low Drop Out Regulator, SOIC, Projected EOL: 2036-04-29 RoHS : Compliant |
| 325 | ||
| MIC2951-03YM-TR | Microchip Technology Inc | Improved LP2951 Low Drop-out Regulator, SOIC, Projected EOL: 2036-04-28 RoHS : Compliant |
| 72 | ||
| MIC2951-03YM | Microchip Technology Inc | Improved LP2951 Low Drop-out Regulator, SOIC, Projected EOL: 2036-03-11 RoHS : Compliant |
| 6 | ||
![]() Rochester Electronics | LP2951ACN-3.3G![]() | onsemi | LDO Regulator, 100 mA, 30V, Micropower, with Shutdown Vout: 3.3 V; 0.5% RoHS : Compliant |
| 12,102 | |
LP2951-50D![]() | Texas Instruments | IC VOLT REG Fixed 1 REG 1.8V 500mA 8-SOIC T/R RoHS : Compliant |
| 75 | ||
LP2951ACN/NOPB![]() | Texas Instruments | IC VOLT REG Adjustable 1 REG 1.24V 100mA 8-DIP Tube RoHS : Compliant |
| 15,730 | ||
TPS542951PWPR![]() | Texas Instruments | IC VOLT REG Adjustable Step-Down Buck 3 OUT 800mV - 16V 3A, 2A, 2A 40-QFN T/R RoHS : Compliant |
| 19 | ||
| LP2951-02YN | Micrel Inc | IC VOLT REG Adjustable (Fixed) 1 REG 1.24V (5V) 100mA 8-DIP Tube RoHS : Compliant |
| 4,139 | ||
| MIC2951-02BN | Micrel Inc | Fixed/Adjustable Positive LDO Regulator, 1.24V Min, 29V Max, 0.6V Dropout, BIPolar, PDIP8 RoHS : Not Compliant |
| 584 | ||
| MIC2951-03BN | Micrel Inc | Fixed/Adjustable Positive LDO Regulator, 1.24V Min, 29V Max, 0.6V Dropout, BIPolar, PDIP8 RoHS : Not Compliant |
| 1,285 | ||
| MIC2951-4.8BM | Micrel Inc | 4.753V Min, 4.947V Max, 0.6V Dropout, BIPolar, PDSO8 RoHS : Not Compliant |
| 4,430 | ||
| MIC29512BT L2 | Micrel Inc | 5A FAST-RESPONSE LDO Regulator |
| 5,189 | ||
| TC2951-3.0VOA | Microchip Technology Inc | LDO Regulator Pos 3.0V 0.1A RoHS : Not Compliant |
| 2,212 | ||
| TC2951-3.0VOATR | Microchip Technology Inc | TC2951 - LDO Regulator Pos 3.0V 0.1A RoHS : Compliant |
| 2,598 | ||
| TC2951-5.0VOA | Microchip Technology Inc | TC2951 - LDO Regulator Pos 5.0V 0.1A |
| 2,345 | ||
| TC2951-5.0VOATR | Microchip Technology Inc | LDO Regulator Pos 5.0V 0.1A RoHS : Not Compliant |
| 2,597 | ||
| LP2951ACN/NOPB | National Semiconductor Corporation | IC VOLT REG Adjustable 1 REG 1.24V 100mA 8-DIP Tube RoHS : Compliant |
| 11,089 | ||
| LP2951CM-3.0/NAK2 | National Semiconductor Corporation | Adjustable Regulator RoHS : Compliant |
| 6,404 | ||
![]() Sager | HW-03-15-L-D-295-104 | Samtec Inc | Board to Board & Mezzanine Connectors High Temperature Flexible Board Stacking Header RoHS : Compliant |
| 1,078 | |
| 2951 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 2176295-1 | TE Connectivity | Wirewound Resistors - Chassis Mount CJN 100W 4R7 5% LEAD RoHS : Compliant | 0 | |||
| 295-1-5813-1 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| HW-02-08-F-S-295-117 | Samtec Inc | Board to Board & Mezzanine Connectors High Temperature Flexible Board Stacking Header, 0.100 Pitch RoHS : Compliant |
| 0 | ||
| 1402951 | Phoenix Contact | Sensor Cables / Actuator Cables SAC-5P-M12MS/ 15.0-927/M12FS VA | 0 | |||
| 8-461295-1 | TE Connectivity | Crimpers / Crimping Tools ANVIL | 0 | |||
| FW-10-02-LM-D-295-155 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Micro Board Stacking Header, 0.050 Pitch RoHS : Compliant |
| 0 | ||
| FW-10-05-L-D-295-155-P-TR | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| FTR-129-51-S-S-P-FR | Samtec Inc | Headers & Wire Housings | 0 | |||
| FW-05-03-F-D-295-100-A | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| FW-05-03-L-D-295-100-P-TR | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| ZW-06-15-L-D-295-100 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| ZW-08-08-T-D-295-115 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| M55629/5-108 | Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag | 0 | |||
![]() ComSIT USA | NCV2951CDR2G![]() | onsemi | AVAILABLE EU RoHS : Compliant | 3,750 | ||
| LP2951ACMNOPB | Texas Instruments | AVAILABLE EU | 4,645 | |||
![]() ComSIT USA | LP2951ACMX | National Semiconductor Corporation | MICROPOWER VOLTAGE REGULATOR Fixed/Adjustable Positive LDO Regulator, 1.24V Min, 29V Max, 0.6V Dropout, BIPolar, PDSO8 RoHS : Not Compliant | 3,924 | ||
| LP2951CMXNOPB | National Semiconductor Corporation | MICROPOWER VOLTAGE REGULATOR Fixed/Adjustable Positive LDO Regulator, 1.24V Min, 29V Max, 0.6V Dropout, BIPolar, PDSO8 RoHS : Compliant | 3,600 | |||
| EXS00ACG0129518M432 | Nihon Dempa Kogyo Co Ltd | Electronic Component RoHS : Compliant | 2,918 | |||
| LP295102BMTR | Micrel Inc | 100 MILLIAMP LOW-DROPOUT VOLTAGE REGULATOR Fixed/Adjustable Positive LDO Regulator, 1.24V Min, 29V Max, 0.6V Dropout, BIPolar, PDSO8 RoHS : Not Compliant | 2,500 | |||
| LP2951ACMX33NOPB | Texas Instruments | LDO Regulator Pos 3.3V 0.1A 8-Pin SOIC T/R RoHS : Compliant | 2,350 | |||
| LP295150DR | Texas Instruments | Fixed Positive LDO Regulator, 5V, 0.6V Dropout, BIPolar, PDSO8 RoHS : Compliant | 1,760 | |||
| LP2951CMMNOPB | National Semiconductor Corporation | MICROPOWER VOLTAGE REGULATOR Fixed/Adjustable Positive LDO Regulator, 1.24V Min, 29V Max, 0.6V Dropout, BIPolar, PDSO8 RoHS : Compliant | 1,000 | |||
| RH80532GC029512 | Intel Corporation | MOBILE PENTIUM 4 PROCESSOR-M Microprocessor, 32-Bit, 1700MHz, CMOS, CPGA478 RoHS : Not Compliant | 896 | |||
| LP2951CM30 | National Semiconductor Corporation | SERIES OF ADJUSTABLE MICROPOWER VOLTAGE REGULATOR Fixed/Adjustable Positive LDO Regulator, 1.24V Min, 29V Max, 0.6V Dropout, BIPolar, PDSO8 RoHS : Not Compliant | 760 | |||
| MIC295103YN | Micrel Inc | 150 mA Low-Dropout Voltage Regulator Fixed/Adjustable Positive LDO Regulator, 1.24V Min, 29V Max, 0.6V Dropout, PDIP8 RoHS : Compliant | 600 | |||
| LP2951CMNOPB | National Semiconductor Corporation | SERIES OF ADJUSTABLE MICROPOWER VOLTAGE REGULATOR Fixed/Adjustable Positive LDO Regulator, 1.24V Min, 29V Max, 0.6V Dropout, BIPolar, PDSO8 RoHS : Compliant | 433 | |||
| MIC29512BT | Micrel Inc | 5 AMP FAST-RESPONSE LDO REGULATOR Adjustable Positive LDO Regulator, 1.25V Min, 16V Max, 1V Dropout, BIPolar RoHS : Not Compliant | 234 | |||
| LM2951ACM | National Semiconductor Corporation | Electronic Component RoHS : Not Compliant | 200 | |||
| LP2951CMC | National Semiconductor Corporation | SERIES OF ADJUSTABLE MICROPOWER VOLTAGE REGULATOR Fixed/Adjustable Positive LDO Regulator, 1.24V Min, 29V Max, 0.6V Dropout, BIPolar, PDSO8 RoHS : Not Compliant | 90 | |||
| AM29516DC | AMD | Multiplier, ECL, CDIP64 RoHS : Not Compliant | 4 | |||
![]() Interstate Connecting Components | M39029/5-116 | TE Connectivity | 26482 SII CON SZ 16 SKT RoHS : Compliant |
| 4,772 | |
| M39029/5-116 | Tri-Star Electronics International | 26482 SII CON SZ 16 SKT 83733/81703/83723 |
| 58 | ||
| 891-029-51PS-BST2T-02 | Glenair Inc | DUAL ROW NANO PLUG REAR MOUNT VERTICAL THRU HOLE | 0 | |||
| 714295-1 | TE Connectivity | RFCI 80/1600 (452) | 0 | |||
| ZPF000000000112951 | TE Connectivity | EMBASE M 37PTS T.28 CLAV.N + E | 0 | |||
| 155295-1020 | ITT Interconnect Solutions | MKJ4B1W8-13PC | 0 | |||
| 031-5329-51RFX | Amphenol RF | BNC STRAIGHT PCB JACK, THROUGH 0 |
| 0 | ||
| 881295-1 | TE Connectivity | 2P FASTIN-ON HSG. |
| 0 | ||
| 85004295110 | SOURIAU-SUNBANK | J3804 | 0 | |||
| M39029/5-116 | Conesys | MILSPEC ELEC CONTACT, 16 SKT | 0 | |||
| M39029/5-116 | Glenair Inc | M39029 CONTACTS | 0 | |||
| M39029/5-116 | Amphenol Aerospace | CONTACT M5100-001-0016L | 0 | |||
| 78295-102LF | Amphenol FCi | QKE HDR-78295-102LF RoHS : Compliant | 0 | |||
| 1622295-1 | TE Connectivity | LR0204 1% 9K1 RoHS : Compliant |
| 0 | ||
| 2295163-2 | TE Connectivity | RoHS : Compliant |
| 0 | ||
![]() NexGen Digital | LP2951-50DR![]() | Texas Instruments | RoHS : Compliant | 9 | ||
LP2951ACMX/NOPB![]() | Texas Instruments | RoHS : Compliant | 6 | |||
![]() PEI Genesis | M39029/5-118 | Tri-Star Electronics International |
| 11,517 | ||
| 031-5329-51RFX | Amphenol RF |
| 196 | |||
| MS29513-013 | SOURIAU-SUNBANK |
| 0 | |||
| M39029/5-116 | Tri-Star Electronics International |
| 0 | |||
| M39029/5-116 | Amphenol Aerospace |
| 0 | |||
| 12951607 | SOURIAU-SUNBANK |
| 0 | |||
| M39029/5-118 | Amphenol Aerospace |
| 0 | |||
| 12951634 | SOURIAU-SUNBANK |
| 0 | |||
| 23A02829-51 | SOURIAU-SUNBANK |
| 0 | |||
| 143-2951-100 | ITT Interconnect Solutions |
| 0 | |||
| 12951868 | SOURIAU-SUNBANK |
| 0 | |||
| 12951522 | SOURIAU-SUNBANK |
| 0 | |||
| 012-9518-009 | ITT Interconnect Solutions |
| 0 | |||
| 12951521 | SOURIAU-SUNBANK |
| 0 | |||
| S3-29516W6-1 | SOURIAU-SUNBANK |
| 0 | |||
![]() PUI | 12.95132 | 10,055 | ||||
| 12.95134 | 10,055 | |||||
| 12.95194 | 10,055 | |||||
| 12.95104 | 10,055 | |||||
| 12.95176 | 4,015 | |||||
| 12.95162 | 4,015 | |||||
| 12.95105 | 4,015 | |||||
| 12.95122 | 4,000 | |||||
| 12.95168 | 1,000 | |||||
| 12.95113 | 1,000 | |||||
| 12.95109 | 900 | |||||
| 12.95103 | Geyer Electronic E K | 715 | ||||
| 12.95187 | 613 | |||||
| 12.95156 | 50 | |||||
| 12.95198 | 10 | |||||
![]() Chip 1 Exchange | NCV2951CDR2G![]() | onsemi | INSTOCK RoHS : Compliant | 61,084 | ||
| 12.9511 | Geyer Electronic E K | INSTOCK | 23,483 | |||
| 12.95133 | Geyer Electronic E K | INSTOCK | 23,483 | |||
| 12.95132 | Geyer Electronic E K | INSTOCK | 10,055 | |||
| NCV2951ACDR2G | INSTOCK | 10,000 | ||||
| 12.95116 | Geyer Electronic E K | INSTOCK | 6,211 | |||
NCV2951ACDR2G![]() | onsemi | INSTOCK RoHS : Compliant | 5,000 | |||
| 12.95161 | Geyer Electronic E K | INSTOCK | 2,080 | |||
| M39029/5-116 | INSTOCK | 1,000 | ||||
| 12.95109 | Geyer Electronic E K | INSTOCK | 900 | |||
| 12.95103 | Geyer Electronic E K | INSTOCK | 715 | |||
| LP2951ACMM-3.3 | National Semiconductor Corporation | INSTOCK RoHS : Not Compliant | 639 | |||
| 12.9519 | Geyer Electronic E K | INSTOCK | 20 | |||
LP2951ACM/NOPB![]() | Texas Instruments | INSTOCK RoHS : Compliant | 14 | |||
| 12.95198 | Geyer Electronic E K | INSTOCK | 10 | |||
![]() Avnet Abacus | 32951 | TE Connectivity | Ring Tongue Terminal 1622AWG 2174mm 792mm Tin Loose Piece (Alt: 32951) RoHS : Compliant | 14,000 | ||
| 483295-1 | TE Connectivity | (Alt: 483295-1) RoHS : Not Compliant | 0 | |||
| 39295143 | Molex | Conn Power HDR 14 POS 42mm Solder RA ThruHole 14 Terminal 1 Port Bag (Alt: 39295143) RoHS : Compliant | 0 | |||
| 5536295-1 | TE Connectivity | Conn Backplane RCP 40 POS 127mm Solder RA ThruHole (Alt: 5536295-1) RoHS : Compliant | 0 | |||
| 1372295-1 | TE Connectivity | (Alt: 1372295-1) RoHS : Compliant | 0 | |||
| 2295163-2 | TE Connectivity | (Alt: 2295163-2) RoHS : Compliant | 0 | |||
| 1529510000 | Weidmüller Interface GmbH & Co. KG | BLZ 50810B SN SW (Alt: 1529510000) RoHS : Compliant | 0 | |||
| CF2951-000 | TE Connectivity | (Alt: CF2951-000) RoHS : Not Compliant | 0 | |||
| M39029/5-116 | Glenair Inc | (Alt: M39029/5-116) RoHS : Compliant | 0 | |||
| 031-5329-51RFX | Amphenol Corporation | RF Coaxial Connector BNC Coaxial Straight Jack Through Hole 75 ohm Phosphor Bronze (Alt: 031-5329-51RFX) RoHS : Compliant | 0 | |||
| 929515004002002 | Kyocera AVX Components | Automotive Cable to Cable Connector Hard seal (Alt: 929515004002002+) RoHS : Compliant | 0 | |||
| 929515004004004 | Kyocera AVX Components | Wire to Board Connector (Alt: 929515004004004+) RoHS : Compliant | 0 | |||
| TW-05-04-G-D-295-100 | Samtec Inc | Stacking Board Connector TW Series 10 Contacts Header 2 mm Through Hole 2 Rows (Alt: TW-05-04-G-D-295-100) RoHS : Compliant | 0 | |||
| FW-20-03-F-D-295-100-A-P | Samtec Inc | Board Stackers Spacers Pin Header 749 mm 40 Contacts Solder 2 Rows 127 mm FW Series (Alt: FW-20-03-F-D-295-100-A-P) RoHS : Compliant | 0 | |||
| FW-20-03-F-D-295-100-A-P-TR | Samtec Inc | Board Stackers Spacers Pin Header 749 mm 40 Contacts Solder 2 Rows 127 mm FW Series (Alt: FW-20-03-F-D-295-100-A-P-TR) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 5-2367295-1 | TE Connectivity | PROTECTION CAP/CVR,PCON21 (Alt: 5-2367295-1) RoHS : Not Compliant |
| 3,000 | |
| 031-5329-51RFX | Amphenol Corporation | RF / Coaxial Connector, BNC Coaxial, Straight Jack, Through Hole, 75 ohm, Phosphor Bronze (Alt: 031-5329-51RFX) RoHS : Compliant | 0 | |||
NCV2951CDR2G![]() | onsemi | LDO Regulator, 100 mA, Ultra-Low Iq Vout: 5.0 V or Adj; ?1.0%. (Alt: NCV2951CDR2G) RoHS : Compliant | 0 | |||
NCV2951ACDR2G![]() | onsemi | LDO Regulator, 100 mA, Ultra-Low Iq Vout: 5.0 V or Adj; ?0.5%. (Alt: NCV2951ACDR2G) RoHS : Compliant |
| 0 | ||
LP2951ACDMR2G![]() | onsemi | LDO Regulator, 100 mA, 30V, Micropower, with Shutdown Vout: 5.0 or Adj.; 0.5%. (Alt: LP2951ACDMR2G) RoHS : Compliant | 0 | |||
LP2951CD-3.0R2G![]() | onsemi | LDO Regulator, 100 mA, 30V, Micropower, with Shutdown Vout: 3.0 V; 1.0%. (Alt: LP2951CD-3.0R2G) RoHS : Compliant | 0 | |||
LP2951ACDM-3.3RG![]() | onsemi | LDO Regulator, 100 mA, 30V, Micropower, with Shutdown Vout: 3.3 V; 0.5%. (Alt: LP2951ACDM-3.3RG) RoHS : Compliant | 0 | |||
LP2951ACDR2G![]() | onsemi | LDO Regulator, 100 mA, 30V, Micropower, with Shutdown Vout: 5.0 or Adj.; 0.5%. (Alt: LP2951ACDR2G) RoHS : Compliant | 0 | |||
LP2951ACD-3.3R2G![]() | onsemi | LDO Regulator, 100 mA, 30V, Micropower, with Shutdown Vout: 3.3 V; 0.5%. (Alt: LP2951ACD-3.3R2G) RoHS : Compliant |
| 0 | ||
LP2951CD-3.3R2G![]() | onsemi | LDO Regulator, 100 mA, 30V, Micropower, with Shutdown Vout: 3.3 V; 1.0%. (Alt: LP2951CD-3.3R2G) RoHS : Compliant | 0 | |||
| 52951-3 | TE Connectivity | (Alt: 52951-3) RoHS : Compliant | 0 | |||
| 0039295123 | Molex | (Alt: 0039295123) RoHS : Compliant | 0 | |||
![]() Avnet Silica | LP2951ACDM-3.3RG![]() | onsemi | LDO Regulator 100 mA 30V Micropower with Shutdown Vout 33 V 05 ONSSPCLDO (Alt: LP2951ACDM-3.3RG) RoHS : Compliant | 2,064,000 | ||
LP2951CDR2G![]() | onsemi | LDO Regulator 100 mA 30V Micropower with Shutdown Vout 50 or Adj 10 ONSSPCLDO (Alt: LP2951CDR2G) RoHS : Compliant | 992,500 | |||
LP2951ACDR2G![]() | onsemi | LDO Regulator 100 mA 30V Micropower with Shutdown Vout 50 or Adj 05 ONSSPCLDO (Alt: LP2951ACDR2G) RoHS : Compliant | 200,000 | |||
LP2951ACDMR2G![]() | onsemi | LDO Regulator 100 mA 30V Micropower with Shutdown Vout 50 or Adj 05 ONSSPCLDO (Alt: LP2951ACDMR2G) RoHS : Compliant | 92,000 | |||
| LP2951CS-L-3-3/TR | MaxLinear Inc | LDO Voltage Regulator Fixed 24 V to 30 V Single 380 mV Drop 33 V 100 mA8 Pins SOIC (Alt: LP2951CS-L-3-3/TR) RoHS : Compliant | 7,500 | |||
LP2951ACD-3.0R2G![]() | onsemi | LDO Regulator 100 mA 30V Micropower with Shutdown Vout 30 V 05 ONSSPCLDO (Alt: LP2951ACD-3.0R2G) RoHS : Compliant | 2,500 | |||
NCV2951CDR2G![]() | onsemi | LDO Regulator 100 mA UltraLow Iq Vout 50 V or Adj 10 ONSSPCLDO (Alt: NCV2951CDR2G) RoHS : Compliant | 0 | |||
NCV2951ACDR2G![]() | onsemi | LDO Regulator 100 mA UltraLow Iq Vout 50 V or Adj 05 ONSSPCLDO (Alt: NCV2951ACDR2G) RoHS : Compliant | 0 | |||
| MP2951GU-0010-Z | Monolithic Power Systems | B32643B4224K289 (Alt: MP2951GU-0010-Z) RoHS : Compliant | 0 | |||
| MP2951GU-0008-Z | Monolithic Power Systems | QFN32 DUALPHASEDUALRAIL DIGITAL POL CONTROLLER (Alt: MP2951GU-0008-Z) RoHS : Compliant | 0 | |||
| MP2951GU-000B-P | Monolithic Power Systems | QFN32 DUALPHASEDUALRAIL DIGITAL POL CONTROLLER (Alt: MP2951GU-000B-P) RoHS : Compliant | 0 | |||
| MP2951GU-0008-P | Monolithic Power Systems | QFN32 DUALPHASEDUALRAIL DIGITAL POL CONTROLLER (Alt: MP2951GU-0008-P) RoHS : Compliant | 0 | |||
| MIC2951-03YMM-TR | Microchip Technology Inc | LDO Regulator Pos 5V 015A 8Pin MSOP TR (Alt: MIC2951-03YMM-TR) RoHS : Compliant | 0 | |||
| LP2951CS-L-5-0/TR | MaxLinear Inc | LDO Voltage Regulator Fixed 24 V to 30 V Single 380 mV Drop 5 V 100 mA8 Pins SOIC (Alt: LP2951CS-L-5-0/TR) RoHS : Compliant | 0 | |||
| DTR0000252951 (ALS) | Sanmina Corporation | (Alt: DTR0000252951) RoHS : Not Compliant | 0 | |||
![]() Chip-Germany GmbH | WQV70N/2 9512240000 | WeEn Semiconductor Co Ltd | 1 | |||
![]() Component Electronics, Inc | M39029/5-115 | Amphenol Aerospace | IN STOCK SHIP TODAY |
| 6,368 | |
| LP2951ACMX/NOPB | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 2,300 | ||
LP2951ACMM/NOPB![]() | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,450 | ||
| M39029/5-115 | ITT Interconnect Solutions | IN STOCK SHIP TODAY |
| 659 | ||
| LP2951ACMM-3.0/NOPB | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 400 | ||
LP2951-50D![]() | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 389 | ||
| 2930-01-295-1323 | Prestolite Electric | IN STOCK SHIP TODAY |
| 118 | ||
| LP2951CM-3.0 | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 110 | ||
MIC2951-03BM![]() | Micrel Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 90 | ||
| LP2951ACM-3.0 | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 41 | ||
| LP2951ACMX | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant | 34 | |||
| LP2951ACMM-3.0 | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 10 | ||
MIC2951-03BMM![]() | Micrel Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 5 | ||
| LP2951CS | Alpha Semiconductor | IN STOCK SHIP TODAY | 4 | |||
| 536295-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 1 | ||
![]() DB Roberts | 52-29-51-4 | Southco | Captive fastening in tight spaces is no problem with the reduced footprint of these Miniature Series captive screws. Combination tool-head recesses and knurled screw options provide lots of versatility for fastening/unfastening by hand or with tools. RoHS : Compliant |
| 700 | |
| 82-35-295-15 | Southco | The simplicity of a quarter turn is all it takes to secure panels quickly and easily with these versatile little fasteners. Numerous head styles stud lengths receptacle styles and accessories provide flexibility for accommodating many specific mountin RoHS : Compliant |
| 20 | ||
| 2951 | Heyco | SOCB 27M WHITE | 0 | |||
| SC029517B | Essentra Components | ROUND END CAPEPDM BLACK | 0 | |||
| SC295-100 | Shercon Inc | SC295-1000 ULTRABAKE SILICONE | 0 | |||
| 52-29-51-5 | Southco | 0 | ||||
| 20032951 | Essentra Components | 0 | ||||
| SC029515C | Essentra Components | ROUND END CAP EPDM BLK.295X1.5 | 0 | |||
| 2951000 | PennEngineering (PEM) | 0 | ||||
| 17W02951 | Essentra Components | FLAT WASHER, .220 ID, .295 OD, | 0 | |||
| SC029510B | Essentra Components | ROUND END CAPEPDM BLACK | 0 | |||
| SC029517A | Essentra Components | ROUND END CAPSILICON NATURAL | 0 | |||
| SC029510A | Essentra Components | ROUND END CAPSILICON NATURAL | 0 | |||
| 52-29-51-4-000 | Southco | Captive fastening in tight spaces is no problem with the reduced footprint of these Miniature Series captive screws. Combination tool-head recesses and knurled screw options provide lots of versatility for fastening/unfastening by hand or with tools. | 0 | |||
| 20029517 | Essentra Components | 0 | ||||
![]() EBV Elektronik | LP2951CDR2G![]() | onsemi | LDO Regulator 100 mA 30V Micropower with Shutdown Vout 50 or Adj 10 ONSSPCLDO (Alt: LP2951CDR2G) RoHS : Compliant | 1,580,000 | ||
LP2951ACDR2G![]() | onsemi | LDO Regulator 100 mA 30V Micropower with Shutdown Vout 50 or Adj 05 ONSSPCLDO (Alt: LP2951ACDR2G) RoHS : Compliant | 1,520,000 | |||
LP2951CD-3.3R2G![]() | onsemi | LDO Regulator 100 mA 30V Micropower with Shutdown Vout 33 V 10 ONSSPCLDO (Alt: LP2951CD-3.3R2G) RoHS : Compliant | 330,000 | |||
LP2951ACD-3.3R2G![]() | onsemi | LDO Regulator 100 mA 30V Micropower with Shutdown Vout 33 V 05 ONSSPCLDO (Alt: LP2951ACD-3.3R2G) RoHS : Compliant | 207,500 | |||
LP2951ACD-3.0R2G![]() | onsemi | LDO Regulator 100 mA 30V Micropower with Shutdown Vout 30 V 05 ONSSPCLDO (Alt: LP2951ACD-3.0R2G) RoHS : Compliant | 55,000 | |||
NCV2951CDR2G![]() | onsemi | LDO Regulator 100 mA UltraLow Iq Vout 50 V or Adj 10 ONSSPCLDO (Alt: NCV2951CDR2G) RoHS : Compliant | 0 | |||
LP2951CDMR2G![]() | onsemi | LDO Regulator 100 mA 30V Micropower with Shutdown Vout 50 or Adj 10 ONSSPCLDO (Alt: LP2951CDMR2G) RoHS : Compliant | 0 | |||
NCV2951ACDR2G![]() | onsemi | LDO Regulator 100 mA UltraLow Iq Vout 50 V or Adj 05 ONSSPCLDO (Alt: NCV2951ACDR2G) RoHS : Compliant | 0 | |||
LP2951ACDMR2G![]() | onsemi | LDO Regulator 100 mA 30V Micropower with Shutdown Vout 50 or Adj 05 ONSSPCLDO (Alt: LP2951ACDMR2G) RoHS : Compliant | 0 | |||
| LP2951-02YM-TR | Microchip Technology Inc | (Alt: LP2951-02YM-TR) RoHS : Compliant | 0 | |||
| TS2951CS33 RLG | Taiwan Semiconductor | (Alt: TS2951CS33 RLG) RoHS : Compliant | 0 | |||
| MIC2951-02YM-TR | Microchip Technology Inc | LDO Regulator Pos 5V 015A 8Pin SOIC TR (Alt: MIC2951-02YM-TR) RoHS : Compliant | 0 | |||
LP2951CD-3.0R2G![]() | onsemi | LDO Regulator 100 mA 30V Micropower with Shutdown Vout 30 V 10 ONSSPCLDO (Alt: LP2951CD-3.0R2G) RoHS : Compliant | 0 | |||
| MIC2951-03YMM-TR | Microchip Technology Inc | LDO Regulator Pos 5V 015A 8Pin MSOP TR (Alt: MIC2951-03YMM-TR) RoHS : Compliant | 0 | |||
MIC2951-3.3YMM-TR![]() | Microchip Technology Inc | (Alt: MIC2951-3.3YMM-TR) RoHS : Compliant | 0 | |||
![]() Flip Electronics | LP2951ACDR2G![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 75,000 | |
LP2951ACNG![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 19,288 | ||
LP2951CD-3.3G![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 7,392 | ||
| LP2951CMX | onsemi | Stock, Ship Today RoHS : Compliant |
| 6,577 | ||
LP2951CN-3.0G![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 6,200 | ||
NCV2951CDR2G![]() | onsemi | Stock, Ship Today RoHS : Compliant | 5,000 | |||
| NCF2951ETT/TPE080J | NXP Semiconductors | Stock | 2,500 | |||
NCV2951ACDR2G![]() | onsemi | Stock, Ship Today RoHS : Compliant | 2,472 | |||
LP2951CD-3.0G![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 2,058 | ||
LP2951CN-3.3G![]() | onsemi | Stock RoHS : Compliant | 1,500 | |||
LP2951ACN-3.0G![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 1,350 | ||
LP2951ACN-3.3G![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 925 | ||
LP2951ACD-3.3R2G![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 807 | ||
LP2951ACD-3.0G![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 71 | ||
![]() Master Electronics | 29-511-11B | TE Connectivity | Relay 29-511-11B RoHS : Compliant |
| 0 | |
| HW-02-08-F-S-295-117 | Samtec Inc | .100 Flex Stack High-Temp Flexible Board Stacker Through-hole RoHS : Compliant |
| 0 | ||
| JANTXV1N5295-1 | Microchip Technology Inc | 100V 902UA 475MW Current Regulator THT RoHS : Compliant |
| 0 | ||
| C115366-2951C | C&K Switches | HiRel RoHS : Compliant |
| 0 | ||
| 8-461295-1 | TE Connectivity | ANVIL RoHS : Not Compliant |
| 0 | ||
| FW-10-02-LM-D-295-155 | Samtec Inc | .050'' BOARD SPACERS RoHS : Compliant |
| 0 | ||
| FW-10-05-L-D-295-155-P-TR | Samtec Inc | .050 Flex Stack Flexible Micro Board Stacker Surface Mount RoHS : Compliant |
| 0 | ||
| FW-38-05-F-D-295-157 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-01-G-D-295-177 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-FM-D-295-100 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-04-04-G-D-295-138 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-04-05-G-D-295-153 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-05-03-F-D-295-100-A | Samtec Inc | .050 Flex Stack Flexible Micro Board Stacker Surface Mount RoHS : Compliant |
| 0 | ||
| FW-05-03-L-D-295-100-P-TR | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 155295-1020 | ITT Interconnect Solutions | RoHS : Not Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3W12951LF-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm SMB Plug to 75 Ohm N Male Cable 12 Inch Length Using 75 Ohm RG59 Coax, LF Solder., Radio frequency assembly 75 Ohm SMB plug to 75 Ohm N male cable 12 inch length using 75 Ohm RG59 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm SMB plug to 75 Ohm N male cable 12 inch length using 75 Ohm RG59 coax, LF solder, SMB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMB cable connection on one end and type N cable connection on the other. Our SMB to N type cable assemblies have a plug gender on end 1 and male on end 2. PE3W12951LF-12 can also be known as a SMB male to type N plug cable assembly and will be shipped same-day as it is purchased. SMB male to type N plug cable assembly PE3W12951LF-12 is built with RG59 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to N type cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this SMB plug to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W12951LF-12 can also be used in the other direction and will be type N male to SMB plug cable assembly if the opposite connectivity is required. SMB male to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to type N cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm SMB plug to 75 Ohm N male cable 12 inch length using 75 Ohm RG59 coax, LF solder. |
| 961 | |
| PE3W12951LF-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm, Length, Max: 24 inches. 75 Ohm SMB Plug to 75 Ohm N Male Cable 24 Inch Length Using 75 Ohm RG59 Coax, LF Solder., Radio frequency assembly 75 Ohm SMB plug to 75 Ohm N male cable 24 inch length using 75 Ohm RG59 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm SMB plug to 75 Ohm N male cable 24 inch length using 75 Ohm RG59 coax, LF solder, SMB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMB cable connection on one end and type N cable connection on the other. Our SMB to N type cable assemblies have a plug gender on end 1 and male on end 2. PE3W12951LF-24 can also be known as a SMB male to type N plug cable assembly and will be shipped same-day as it is purchased. SMB male to N type plug cable assembly PE3W12951LF-24 is built with RG59 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to type N cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this SMB plug to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W12951LF-24 can also be used in the other direction and will be type N male to SMB plug cable assembly if the opposite connectivity is required. SMB male to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to type N cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm SMB plug to 75 Ohm N male cable 24 inch length using 75 Ohm RG59 coax, LF solder. |
| 961 | ||
| PE3C10295-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. SMA Male to Straight Cut Lead Low Loss Cable 100 CM Length Using LMR-100A-UF Coax with Times Microwave Components., Radio frequency assembly SMA male to straight cut lead low loss cable 100 cm length using LMR-100A-UF coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to straight cut lead low loss cable 100 cm length using LMR-100A-UF coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to straight cut lead cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a straight cut lead cable connection on the other. Our low loss SMA to straight cut lead cable assembly has a male gender on end 1 and a sexless on end 2. PE3C10295-100CM can also be known as a low loss SMA plug to straight cut lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10295-100CM RF cable has a TPE jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMA plug to straight cut lead sexless cable assembly PE3C10295-100CM is built with LMR-100A-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to straight cut lead cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10295-100CM can also be used in the other direction and will be a straight cut lead sexless to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to straight cut lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to straight cut lead cable assembly for quick shipment worldwide. Variations of SMA and straight cut lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to Straight Cut Lead low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 847 | ||
| PE3W12951LF-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm, Length, Max: 60 inches. 75 Ohm SMB Plug to 75 Ohm N Male Cable 60 Inch Length Using 75 Ohm RG59 Coax, LF Solder., Radio frequency assembly 75 Ohm SMB plug to 75 Ohm N male cable 60 inch length using 75 Ohm RG59 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm SMB plug to 75 Ohm N male cable 60 inch length using 75 Ohm RG59 coax, LF solder, SMB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMB cable connection on one end and type N cable connection on the other. Our SMB to N type cable assemblies have a plug gender on end 1 and male on end 2. PE3W12951LF-60 can also be known as a SMB male to type N plug cable assembly and will be shipped same-day as it is purchased. SMB male to N type plug cable assembly PE3W12951LF-60 is built with RG59 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to type N cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this SMB plug to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W12951LF-60 can also be used in the other direction and will be N type male to SMB plug cable assembly if the opposite connectivity is required. SMB male to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to N type cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm SMB plug to 75 Ohm N male cable 60 inch length using 75 Ohm RG59 coax, LF solder. |
| 697 | ||
| PE3FCA295-10M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM4, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: UPC, Connector 2 Series: ST, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNP, Cable Diameter: 5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. 6-Fiber SC UPC to ST UPC, OM4 Multimode Distribution Cable, 5.0mm Plenum, 2.0mm breakout, Aqua-10M. Pasternack’s PE3FCA295-10M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long 6-fiber cable assembly is equipped with SC/UPC to ST/UPC connectors. Our aqua blue fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM4 fiber that supports 10Gb Ethernet up to 550 meters and 40G/100G Ethernet up to 150 meters and a bandwidth of 4700 MHz.km that delivers low attenuation and high-speed performance for mission-critical applications. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 6-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA295-10M fiber optic cable with a 5 mm cable diameter and 37 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of SC/UPC to ST/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Our fiber optic breakout assembly is designed for hyperscale data centers and telecom backbones and ensures seamless network connectivity with minimal signal loss. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM4 multimode fiber optic cable that meets your requirements. |
| 47 | ||
| PE3C4295-18 | Pasternack Enterprises |
| 0 | |||
| PE3W02951 | Pasternack Enterprises | Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. QMA Male to QN Male Cable Using RG58 Coax. PE3W02951 is a QMA male to QN male cable using RG58 coax. This Pasternack QMA male to QN male cable assembly uses a 50 Ohm QMA for connector 1 and a 50 Ohm QN for connector 2. Our male QMA to male QN cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02951 QMA male to QN male cable assembly is constructed with RG58 coax. | 0 | |||
| PE3C2295-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 12 inches. BNC Male to BNC Male Cable 12 Inch Length Using RG174 Coax., Radio frequency assembly BNC male to BNC male cable 12 inch length using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to BNC male cable 12 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C2295-12, can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3C2295-12 is built with RG174 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 12 inch length using RG174 coax. | 0 | |||
| PE3C8295-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 39.37 inches. 4.3-10 Female to 7/16 DIN Male Low PIM Cable 100 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 female to 7/16 DIN male low PIM cable 100 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 female to 7/16 DIN male low PIM cable 100 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 7/16 DIN cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a 7/16 DIN cable connection on the other. Our low PIM 4.3-10 to 7/16 DIN cable assembly has a female gender on end 1 and a male on end 2. PE3C8295-100CM can also be known as a low PIM 4.3-10 jack to 7/16 DIN plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.25-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8295-100CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our 4.3-10 female to 7/16 DIN male cable has a maximum VSWR of 1.4:1. 4.3-10 jack to 7/16 DIN plug cable assembly PE3C8295-100CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 7/16 DIN cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8295-100CM can also be used in the other direction and will be a 7/16 DIN male to 4.3-10 female cable assembly if the opposite connectivity is required. Low PIM 4.3-10 jack to 7/16 DIN plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 and 7/16 DIN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 7/16 DIN low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C7295-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. TNC Male to BNC Male Low Loss Cable 100 cm Length Using LMR-100 Coax., Radio frequency assembly TNC male to BNC male low loss cable 100 cm length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to BNC male low loss cable 100 cm length using LMR-100 coax, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and BNC cable connection on the other. Our low loss TNC to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3C7295-100CM can also be known as a low loss TNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to BNC plug cable assembly PE3C7295-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency TNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7295-100CM can also be used in the other direction and will be BNC male to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to BNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to BNC male low loss cable 100 cm length using LMR-100 coax. |
| 0 | ||
| PE3C8295-150CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 59.06 inches. 4.3-10 Female to 7/16 DIN Male Low PIM Cable 150 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 female to 7/16 DIN male low PIM cable 150 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 female to 7/16 DIN male low PIM cable 150 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 7/16 DIN cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a 7/16 DIN cable connection on the other. Our low PIM 4.3-10 to 7/16 DIN cable assembly has a female gender on end 1 and a male on end 2. PE3C8295-150CM can also be known as a low PIM 4.3-10 jack to 7/16 DIN plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.25-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8295-150CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our 4.3-10 female to 7/16 DIN male cable has a maximum VSWR of 1.4:1. 4.3-10 jack to 7/16 DIN plug cable assembly PE3C8295-150CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 7/16 DIN cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8295-150CM can also be used in the other direction and will be a 7/16 DIN male to 4.3-10 female cable assembly if the opposite connectivity is required. Low PIM 4.3-10 jack to 7/16 DIN plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 and 7/16 DIN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 7/16 DIN low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C2951 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: Mini UHF, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: PE-C195, RF Cable Type: PE-C195, RF Cable Impedance: 50. SMA Male to Mini UHF Male Cable Using PE-C195 Coax. PE3C2951 is a SMA male to Mini UHF male cable using PE-C195 coax. This Pasternack SMA male to Mini UHF male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm Mini UHF for connector 2. Our male SMA to male Mini UHF cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C2951 SMA male to Mini UHF male cable assembly is constructed with PE-C195 coax and the maximum VSWR is 1.4:1. | 0 | |||
| PE3W09295-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to N Male Right Angle Low Loss Cable 12 Inch Length Using LMR-195 Coax., Radio frequency assembly SMA male to N male right angle low loss cable 12 inch length using LMR-195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to N male right angle low loss cable 12 inch length using LMR-195 coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and right angle type N cable connection on the other. Our low loss SMA to right angle N type cable assemblies have a male gender on end 1 and male on end 2. PE3W09295-12 can also be known as a low loss SMA plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. SMA plug to N type plug cable assembly PE3W09295-12 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W09295-12 can also be used in the other direction and will be right angle type N male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to N type right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male right angle low loss cable 12 inch length using LMR-195 coax. |
| 0 | ||
| PE3C2295-120 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 120 inches. BNC Male to BNC Male Cable 120 Inch Length Using RG174 Coax., Radio frequency assembly BNC male to BNC male cable 120 inch length using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to BNC male cable 120 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C2295-120, can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3C2295-120 is built with RG174 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 120 inch length using RG174 coax. |
| 0 | ||
| PE3C8295-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 4.3-10 Female to 7/16 DIN Male Low PIM Cable 12 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 female to 7/16 DIN male low PIM cable 12 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 female to 7/16 DIN male low PIM cable 12 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 7/16 DIN cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a 7/16 DIN cable connection on the other. Our low PIM 4.3-10 to 7/16 DIN cable assembly has a female gender on end 1 and a male on end 2. PE3C8295-12 can also be known as a low PIM 4.3-10 jack to 7/16 DIN plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.25-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8295-12 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our 4.3-10 female to 7/16 DIN male cable has a maximum VSWR of 1.4:1. 4.3-10 jack to 7/16 DIN plug cable assembly PE3C8295-12 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 7/16 DIN cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8295-12 can also be used in the other direction and will be a 7/16 DIN male to 4.3-10 female cable assembly if the opposite connectivity is required. Low PIM 4.3-10 jack to 7/16 DIN plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 and 7/16 DIN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 7/16 DIN low PIM RF cable assembly as per your requirements. |
| 0 | ||
![]() Vyrian | LTC2951IDDB-2#TRMPBF | Analog Devices Inc | Power Supply Support Circuit, Adjustable, 1 Channel, PDSO8 RoHS : Compliant | 11,795 | ||
| LP2951EVM | Texas Instruments | 8,935 | ||||
| MAX72951 | Analog Devices (Maxim Integrated) | 6,472 | ||||
LP2951-33P![]() | Texas Instruments | Fixed Positive LDO Regulator, 3.3V, 0.6V Dropout, BIPolar, PDIP8 | 5,174 | |||
| LP2951CN-3-3-NOPB | Texas Instruments | 4,951 | ||||
LP2951CM-3.3![]() | Texas Instruments | Fixed/Adjustable Positive LDO Regulator, 1.24V Min, 29V Max, 0.6V Dropout, BIPolar, PDSO8 RoHS : Not Compliant | 4,020 | |||
| LP2951ACMX-3-3-E7002569 | Texas Instruments | 3,858 | ||||
| LP2951ACMX-3-3 | Texas Instruments | 3,721 | ||||
| LP2951ACMM-3-0-NOPB | Texas Instruments | 3,137 | ||||
LP2951ACD-3.3![]() | onsemi | Regulator, 1 Output, BIPolar, PDSO8 RoHS : Not Compliant | 780 | |||
| LP2951ACMMX-3.0 | National Semiconductor Corporation | Fixed/Adjustable Positive LDO Regulator, 1.24V Min, 29V Max, 0.6V Dropout, BIPolar, PDSO8 RoHS : Not Compliant | 694 | |||
| LP2951CN-3.3/NOPB | National Semiconductor Corporation | Fixed Positive LDO Regulator, 3.3V, 0.6V Dropout, BIPolar, PDIP8 RoHS : Compliant | 603 | |||
| LP2951ACMM-3.3 | National Semiconductor Corporation | Fixed/Adjustable Positive LDO Regulator, 1.24V Min, 29V Max, 0.6V Dropout, BIPolar, PDSO8 RoHS : Not Compliant | 594 | |||
| LP2951CSDX-3.0 | National Semiconductor Corporation | Fixed/Adjustable Positive LDO Regulator, 1.24V Min, 29V Max, 0.6V Dropout, BIPolar, PDSO8 RoHS : Not Compliant | 512 | |||
| LP2951ACMX-3.0 | National Semiconductor Corporation | Fixed/Adjustable Positive LDO Regulator, 1.24V Min, 29V Max, 0.6V Dropout, BIPolar, PDSO8 RoHS : Not Compliant | 190 | |||
![]() Win Source Electronics | LP2951-50D![]() | Texas Instruments | ADJUSTABLE MICROPOWER VOLTAGE REGULATORS WITH SHUTDOWN | IC REG LIN POS ADJ 100MA 8SOIC RoHS : Compliant |
| 180,000 | |
LP2951ACDR2![]() | onsemi | IC REG LINEAR 100MA 8-SOIC RoHS : Not Compliant |
| 90,570 | ||
LP2951CM.TR![]() | Semtech Corporation | RoHS : Not Compliant |
| 63,630 | ||
LP2951ACM/NOPB![]() | Texas Instruments | LP2950-N/LP2951-N Series of Adjustable Micropower Voltage Regulators | IC REG LIN POS ADJ 100MA 8SOIC RoHS : Compliant |
| 46,830 | ||
LP2951CMMX/NOPB![]() | Texas Instruments | IC REG LDO 5V/ADJ 0.1A 8VSSOP RoHS : Compliant |
| 35,000 | ||
LP2951ACMMX/NOPB![]() | Texas Instruments | IC REG LDO 5V/ADJ 0.1A 8VSSOP RoHS : Compliant |
| 33,170 | ||
LP2951ACDMR2G![]() | onsemi | IC REG LDO 5V/ADJ 0.1A MICRO8 RoHS : Compliant |
| 24,187 | ||
LP2951CM-3.3![]() | Texas Instruments | 150mA ADJUSTABLE VOLTAGE REGULATOR | IC REG LIN POS ADJ 100MA 8SOIC RoHS : Not Compliant |
| 19,620 | ||
LP2951ACSDX-3.3/NOPB![]() | Texas Instruments | IC REG LIN POS ADJ 100MA 8WSON / Linear Voltage Regulator IC Positive Adjustable (Fixed) 1 Output 100mA 8-WSON (4x4) RoHS : Compliant |
| 13,000 | ||
NCV2951ACDR2G![]() | onsemi | IC REG LDO 5V/ADJ 0.1A 8SOIC RoHS : Compliant |
| 12,500 | ||
NCV2951CDR2G![]() | onsemi | IC REG LDO 5V/ADJ 0.1A 8SOIC RoHS : Compliant |
| 9,410 | ||
LP2951ACMX-3.0![]() | Texas Instruments | Series of Adjustable Micropower Voltage Regulators | IC REG LIN POS ADJ 100MA 8SOIC RoHS : Not Compliant |
| 7,990 | ||
LP2951ACMM-3.3![]() | Texas Instruments | Series of Adjustable Micropower Voltage Regulators | IC REG LIN POS ADJ 100MA 8VSSOP RoHS : Not Compliant |
| 3,671 | ||
| LTC2951ITS8-2#TRMPBF | Analog Devices Inc | IC PB ON/OFF CONTROLLER TSOT23-8 / Power Supply Controller Push Button, On/Off Controller TSOT-23-8 RoHS : Compliant |
| 3,650 | ||
LP2951ACMM-3.3/NOPB![]() | Texas Instruments | IC REG LDO 3.3V/ADJ 0.1A 8VSSOP RoHS : Compliant |
| 3,470 | ||
![]() Wuhan P&S | NCV2951CDR2G![]() | onsemi | 100 mA, Low Power Low Dropout Voltage Regulator RoHS : Compliant |
| 62,500 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |