| Electronic Components Datasheet Search |
|
312FCG-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() PEI Genesis | MS3120F14-5P | Amphenol Corporation |
| 25 | ||
| MS3122E20-41PX | Amphenol Corporation | RoHS : Not Compliant |
| 1 | ||
| GSB31213R1CHR | Amphenol Corporation | RoHS : Compliant |
| 0 | ||
| MS3120F18-30P | Amphenol Corporation |
| 0 | |||
| MS3121F18-32PY | Amphenol Corporation |
| 0 | |||
| MS3122E14-12S | Amphenol Corporation | RoHS : Unknown |
| 0 | ||
| MS3122E18-11P | Amphenol Corporation | RoHS : Unknown |
| 0 | ||
| MS3124E14-19SW | Amphenol Corporation | RoHS : Unknown |
| 0 | ||
| MS3124E24-61SW | Amphenol Corporation | RoHS : Unknown |
| 0 | ||
| MS3126E12-8P | Amphenol Corporation |
| 0 | |||
| MS3126E14-19SY-LC | Amphenol Corporation |
| 0 | |||
| MS3126F14-18SY | Amphenol Corporation |
| 0 | |||
| MS3126F14-5SW | Amphenol Corporation |
| 0 | |||
| MS3126F16-26S-LC | Amphenol Corporation |
| 0 | |||
| MS3126F22-21PY | Amphenol Corporation |
| 0 | |||
![]() Braemac Americas-Symmetry | FCLW35312-SMRS-2K | embedded antenna design (ead) | CLW antenna with 2 x 2M RG174 and SMA on LTE, RP-SMA on WiFi |
| 1 | |
ASPI-0312FS-100M-T2![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
ASPI-0312FS-2R2N-T2![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ASVMPALP-312.5000MHZ-XJ-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ASVMPALV-312.5000MHZ-L-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
AIUR-03-120J![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AM1LS-0312DLPZ | Aimtec | RoHS : Compliant |
| 0 | ||
| AMA36BR3-120300Y | Aimtec |
| 0 | |||
| ASDMPALP-312.5000MHZ-X-PD-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ASFLMPALV-312.5000MHZ-LR-PD-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
ASPI-0312FS-2R4M-T2![]() | Abracon Corporation |
| 0 | |||
| ASVMPALV-312.5000MHZ-VJ-PD-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AIUR-03-120K | Abracon Corporation | RoHS : Compliant |
| 0 | ||
AM1D-0312DZ![]() | Aimtec | RoHS : Compliant |
| 0 | ||
| AM1DS-0312SLPZ | Aimtec | RoHS : Compliant |
| 0 | ||
![]() DB Roberts | E3-121-0312 | Southco | E3-121-0312 | 0 | ||
| E3-1260-1312 | Southco | E3-1260-1312 | 0 | |||
| E3-123-121 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| E3-1260-0312 | Southco | E3-1260-0312 | 0 | |||
| E3-127-0312 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| E3-123-1259 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| E3-121-1312 | Southco | E3-121-1312 | 0 | |||
| CAL1-3124-312 | SHEREX FASTENING SO | 0 | ||||
| E3-120-312 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| E3-127-1312 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| CAL2-3124-312 | SHEREX FASTENING SO | 0 | ||||
| E3-129-0312 | Southco | 0 | ||||
| E3-123-120 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| E3-123-1206 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| E3-123-125 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
![]() Flip Electronics | 8312AYILFT | Renesas Electronics Corporation | Stock RoHS : Compliant | 120,000 | ||
| CYPD3125-40LQXI | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 8,118 | ||
FST3126DR2G![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 5,000 | ||
| CY7C1312KV18-333BZC | Infineon Technologies AG | Stock RoHS : Not Compliant | 4,080 | |||
| CYPD3123-40LQXI | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 2,945 | ||
| CY7C1062AV33-12BGC | Infineon Technologies AG | Stock | 2,656 | |||
| FOD3125 | onsemi | Stock, Ship Today RoHS : Compliant |
| 1,970 | ||
| CY7C1069AV33-12ZXI | Infineon Technologies AG | Stock | 1,807 | |||
| FOD3120TSV | onsemi | Stock, Ship Today RoHS : Compliant |
| 1,795 | ||
| S32K312NGT0MPBST | NXP Semiconductors | Stock | 1,600 | |||
| Z8673312SEG | Littelfuse Inc | Stock, Ship Today RoHS : Compliant | 822 | |||
| Z8674312VSG | Littelfuse Inc | Stock, Ship Today RoHS : Compliant | 796 | |||
| CYUSB3312-BVXI | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 580 | ||
| Z86E3312PSG | Littelfuse Inc | Stock, Ship Today RoHS : Compliant | 534 | |||
| CY7C1312KV18-300BZXI | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 352 | ||
![]() Pasternack Enterprises US | PE3W17303-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-FR, RF Cable Type: LMR-240-FR, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Fire Rated N Male to SMA Male Low Loss Cable 12 Inch Length Using LMR-240-FR Coax., Radio frequency assembly fire rated N male to SMA male low loss cable 12 inch length using LMR-240-FR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated N male to SMA male low loss cable 12 inch length using LMR-240-FR coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a SMA cable connection on the other. Our low loss type N to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W17303-12 can also be known as a low loss type N plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17303-12 RF cable has a FRPE jacket of 0.240-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Our type N male to SMA male cable has a maximum VSWR of 1.4:1. Type N plug to SMA plug cable assembly PE3W17303-12 is built with LMR-240-FR which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/non-solder contact attachment method and a brass body with tri-metal plating, while the other has the crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W17303-12 can also be used in the other direction and will be a SMA male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 1,617 | |
| PE33123 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: RG302/U, RF Cable Type: RG302, RF Cable Impedance: 75. BNC Male to BNC Male Cable Using 75 Ohm RG302 Coax. PE33123 is a BNC male to BNC male cable using RG302 coax. This Pasternack BNC male to BNC male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. Our male BNC to male BNC cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE33123 BNC male to BNC male cable assembly is constructed with RG302 coax. | 546 | |||
| PE410-06031-210 | Pasternack Enterprises |
| 299 | |||
| PE33123-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG302/U, RF Cable Type: RG302, RF Cable Impedance: 75 Ohm, Length: 12 inches. BNC Male to BNC Male Cable 12 Inch Length Using 75 Ohm RG302 Coax., Radio frequency assembly BNC male to BNC male cable 12 inch length using 75 Ohm RG302 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to BNC male cable 12 inch length using 75 Ohm RG302 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE33123-12, can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE33123-12 is built with RG302 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 12 inch length using 75 Ohm RG302 coax. |
| 238 | ||
| PE3W05283-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 120 inches. N Female Bulkhead to N Male Right Angle Low Loss Cable 120 Inch Length Using LMR-400-UF Coax., Radio frequency assembly N female bulkhead to N male right angle low loss cable 120 inch length using LMR-400-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N female bulkhead to N male right angle low loss cable 120 inch length using LMR-400-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type bulkhead cable connection on one end and right angle type N cable connection on the other. Our low loss N type to right angle type N cable assemblies have a female gender on end 1 and male on end 2. PE3W05283-120 can also be known as a low loss type N jack to right angle N type plug cable assembly and will be shipped same-day as it is purchased. Type N jack to type N plug cable assembly PE3W05283-120 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency N type female bulkhead to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W05283-120 can also be used in the other direction and will be right angle N type male to type N female bulkhead cable assembly if the opposite connectivity is required. Low loss type N jack bulkhead to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female bulkhead to N male right angle low loss cable 120 inch length using LMR-400-UF coax. |
| 132 | ||
| PE3M0312-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BMA, Connector 1 Size: 8, Connector 1 Gender: Pin, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-141FL-NM, RF Cable Type: Coax, RF Cable Specification: PE-141FL-NM datasheet, RF Cable Impedance : 50 Ohm. BMA Size 8 D38999 Contact Pin to SMA Female Cable 60 Inch Length Using PE-141FL-NM Coax with HeatShrink, LF Solder. The PE3M0312-60 from Pasternack is a D38999 contact cable assembly that is built with a size 8 BMA pin contact connection on one end and a SMA female connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This BMA to SMA cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. The PE3M0312-60 RF cable has a copper jacket. This radio frequency cable assembly can withstand temperatures ranging from -65 to 165 degrees C. Our BMA pin to SMA female cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has silver plated copper as the cable’s inner conducting material and PTFE dielectric type. The PE3M0312-60 between-series RF cable has 0.375 inches of repeated minimum bend radius along with 90 dB of minimum RF shielding. BMA pin to SMA female cable assembly is built with PE-141FL-NM, which is a formable coax type. The Pasternack PE3M0312-60 formable cable assembly has a 50 Ohm impedance and is single shielded. Additional dimensions, specifications, and CAD drawings for this BMA to SMA RF cable are available on our downloadable PDF datasheet. BMA pin to SMA female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of BMA and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMA to SMA RF cable assembly as per your requirements. |
| 24 | ||
| PE3M0343-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BMZ, Connector 1 Size: 8, Connector 1 Gender: Socket, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Specification: MIL-STD-348, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FL, RF Cable Type: Coax, RF Cable Specification: PE-SR405FL datasheet, RF Cable Impedance : 50 Ohm. BMZ Size 8 D38999 Contact Socket to SMA Female Cable 12 Inch Length Using PE-SR405FL Coax with HeatShrink, LF Solder. The PE3M0343-12 from Pasternack is a D38999 contact cable assembly that is built with a size 8 BMZ socket contact connection on one end and a SMA female connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This BMZ to SMA cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. This radio frequency cable assembly can withstand temperatures ranging from -65 to 165 degrees C. Our BMZ socket to SMA female cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0343-12 in-series RF cable has 0.78 inches of repeated minimum bend radius. BMZ socket to SMA female cable assembly is built with PE-SR405FL, which is a flexible coax type. The Pasternack PE3M0343-12 flexible cable assembly has a 50 Ohm impedance and is single shielded. Additional dimensions, specifications, and CAD drawings for this BMZ to SMA RF cable are available on our downloadable PDF datasheet. BMZ socket to SMA female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of BMZ and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMZ to SMA RF cable assembly as per your requirements. |
| 8 | ||
| PE7312-30 | Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 7.5 GHz, Impedance: 50 Ohm, Power Maximum: 50 Watt, VSWR Maximum: 1.45:1, Attenuation: 30 dB, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Series 2: 7/16 DIN, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 30 dB Fixed Attenuator, 7/16 DIN Male To 7/16 DIN Female Directional Black Anodized Aluminum Heatsink Body Rated To 50 Watts Up To 7.5 GHz. PE7312-30 is a fixed 30 dB attenuator from Pasternack. This 30dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 7/16 DIN attenuator has a male gender on side 1 and a 7/16 DIN female connector on side 2. The Pasternack PE7312-30 30 dB attenuator is rated for up to 7.5 GHz. Our microwave attenuator is rated to 50 Watts at the stated attenuation value. Our fixed RF attenuator PE7312-30 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 30dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 1 | ||
| PE3C3126 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: SSMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50. SMA Male to SSMA Male Cable Using PE-SR405AL Coax. PE3C3126 is a SMA male to SSMA male cable using PE-SR405AL coax. This Pasternack SMA male to SSMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SSMA for connector 2. Our male SMA to male SSMA cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3C3126 SMA male to SSMA male cable assembly is constructed with PE-SR405AL coax. | 0 | |||
| PE3W15433-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm BNC Female Bulkhead to 75 Ohm BNC Female Bulkhead Cable 12 Inch Length Using 75 Ohm RG179 Coax., Radio frequency assembly 75 Ohm BNC female bulkhead to 75 Ohm BNC female bulkhead cable 12 inch length using 75 Ohm RG179 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC female bulkhead to 75 Ohm BNC female bulkhead cable 12 inch length using 75 Ohm RG179 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC bulkhead cable connection on one end and a BNC bulkhead cable connection on the other. Our BNC to BNC cable assembly has a female gender on end 1 and a female on end 2. PE3W15433-12 can also be known as a BNC jack to BNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W15433-12 RF cable has a FEP jacket of 0.100-inch diameter. The flexible RF cable has an in-series connection. BNC jack to BNC jack cable assembly PE3W15433-12 is built with RG179 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance, and is single shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. BNC jack bulkhead to BNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC RF cable assembly as per your requirements. |
| 0 | ||
| PE3W19312 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to SMA Male Cable Using LMR-400-UF Coax. PE3W19312 is a 7/16 DIN male to SMA male cable using LMR-400-UF coax. This Pasternack 7/16 DIN male to SMA male cable assembly uses a 50 Ohm 7/16 DIN for connector 1 and a 50 Ohm SMA for connector 2. Our male 7/16 DIN to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W19312 7/16 DIN male to SMA male cable assembly is constructed with LMR-400-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE33121LF-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMB Plug Right Angle to SMB Plug Right Angle Cable 36 Inch Length Using RG223 Coax, RoHS., Radio frequency assembly SMB plug right angle to SMB plug right angle cable 36 inch length using RG223 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMB plug right angle to SMB plug right angle cable 36 inch length using RG223 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to SMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMB cable connection on one end and right angle SMB cable connection on the other. Our right angle SMB to right angle SMB cable assemblies have a plug gender on end 1 and plug on end 2. This SMB to SMB cable is a plug to plug coax assembly, PE33121LF-36, can also be known as a right angle SMB male to right angle SMB male cable assembly and will be shipped same-day as it is purchased. SMB male to SMB male cable assembly PE33121LF-36 is built with RG223 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with right angle SMB to right angle SMB cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMB right angle plug to SMB right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMB right angle male to SMB right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to SMB cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMB plug right angle to SMB plug right angle cable 36 inch length using RG223 coax, RoHS. |
| 0 | ||
| PE3W03129 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm. N Male to N Female Bulkhead Cable Using LMR-600-DB Coax. PE3W03129 is a N male to N female bulkhead cable using LMR-600-DB coax. This Pasternack N male to N female bulkhead cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our male N to female N bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03129 N male to N female bulkhead cable assembly is constructed with LMR-600-DB coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C3125 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: SMP, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50. SMA Female to Full Detent SMP Male Bulkhead Cable Using PE-P086 Coax. PE3C3125 is a SMA female to SMP male bulkhead cable using PE-P086 coax. This Pasternack SMA female to SMP male bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMP for connector 2. Our female SMA to male SMP bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C3125 SMA female to SMP male bulkhead cable assembly is constructed with PE-P086 coax. | 0 | |||
| PE3MSA00231-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: TWCH-78-2, RF Cable Type: TWCH-78-2, RF Cable Impedance: 78 Ohm, Length, Max: 24 inches. Halogen Free Bend Relief 3-Slot TRB Plug to Bend Relief 3-Lug TRB Jack for 78 Ohm TWCH-78-2, 24" Cable., Radio frequency assembly halogen free bend relief 3-Slot TRB plug to bend relief 3-Lug TRB jack for 78 Ohm TWCH-78-2, 24" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Halogen free bend relief 3-Slot TRB plug to bend relief 3-Lug TRB jack for 78 Ohm TWCH-78-2, 24" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a plug gender on end 1 and jack on end 2. PE3MSA00231-24 can also be known as a 1553 TRB male to TRB female cable assembly and will be shipped same-day as it is purchased. TRB male to TRB female cable assembly PE3MSA00231-24 is built with TWCH-78-2 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB plug to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MSA00231-24 can also be used in the other direction and will be TRB jack to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this halogen free bend relief 3-Slot TRB plug to bend relief 3-Lug TRB jack for 78 Ohm TWCH-78-2, 24" cable. |
| 0 | ||
![]() Teledyne HiRel | 5962-8606312UA![]() | Teledyne HiRel | PROM, UV ERASABLE, 32K X 8, 250 NS ACCESS TIME RoHS : Not Compliant | 0 | ||
5962-8606312XA![]() | Teledyne HiRel | PROM, UV ERASABLE, 32K X 8, 250 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
5962-8606312QXA![]() | Teledyne HiRel | PROM, UV ERASABLE, 32K X 8, 250 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
5962-8606312YA![]() | Teledyne HiRel | PROM, UV ERASABLE, 32K X 8, 250 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
5962-8606312QYA![]() | Teledyne HiRel | PROM, UV ERASABLE, 32K X 8, 250 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
![]() Venkel Ltd. | C1210X7R631-223KNE | VENKEL LTD | HV Chip Capacitor;1210;X7R;630V;0.022uF;�10% RoHS : Compliant | 0 | ||
| TFCR0402-16W-C-3120DT | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;312R;�0.5% RoHS : Compliant | 0 | |||
| TFCR0402-16W-C-3121FT-1K | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;3.12K;�1% RoHS : Compliant | 0 | |||
| TFCR0402-16W-E-9312BT-1K | VENKEL LTD | Thin Film CR;0402;1/16W;�25PPM;93.1K;�0.1% RoHS : Compliant | 0 | |||
| TFCR0603-10W-C-9312CT-1K | VENKEL LTD | Thin Film CR;0603;1/10W;�50PPM;93.1K;�0.25% RoHS : Compliant | 0 | |||
| TFCR0603-10W-K-3121FT | VENKEL LTD | Thin Film CR;0603;1/10W;�100PPM;3.12K;�1% RoHS : Compliant | 0 | |||
| TFCR0603-16W-C-9312DT | VENKEL LTD | Thin Film CR;0603;1/16W;�50PPM;93.1K;�0.5% RoHS : Compliant | 0 | |||
| TFCR0603-16W-E-3120BT-1K | VENKEL LTD | Thin Film CR;0603;1/16W;�25PPM;312R;�0.1% RoHS : Compliant | 0 | |||
| TFCR0805-10W-C-3123BT | VENKEL LTD | Thin Film CR;0805;1/10W;�50PPM;312K ;�0.1% RoHS : Compliant | 0 | |||
| TFCR0805-10W-C-3123CT-1K | VENKEL LTD | Thin Film CR;0805;1/10W;�50PPM;312K ;�0.25% RoHS : Compliant | 0 | |||
| TFCR0805-10W-E-3121BT | VENKEL LTD | Thin Film CR;0805;1/10W;�25PPM;3.12K;�0.1% RoHS : Compliant | 0 | |||
| TFCR0805-10W-K-9312DT | VENKEL LTD | Thin Film CR;0805;1/10W;�100PPM;93.1K;�0.5% RoHS : Compliant | 0 | |||
| TFCR0805-8W-C-3120CT-1K | VENKEL LTD | Thin Film CR;0805;1/8W;�50PPM;312R;�0.25% RoHS : Compliant | 0 | |||
| TFCR0805-8W-E-3121DT-1K | VENKEL LTD | Thin Film CR;0805;1/8W;�25PPM;3.12K;�0.5% RoHS : Compliant | 0 | |||
| TFCR1206-4W-C-3123DT-1K | VENKEL LTD | Thin Film CR;1206;1/4W;�50PPM;312K ;�0.5% RoHS : Compliant | 0 | |||
![]() Wuhan P&S | CRCW060312K7FKEAHP | Vishay Intertechnologies | CRCW0603-HP 100 12K7 1% ET1 E3 RoHS : Compliant |
| 30,000 | |
| FOD3125SD | onsemi | - RoHS : Compliant |
| 18,000 | ||
| ESDU3121MXT5G | onsemi | 12V Unidirectional ESD Protection Device RoHS : Compliant |
| 16,000 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |