| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow |
 Braemac Americas-Symmetry | XB3-24DMRS
| Digi International Inc | XBee3 PRO - 2.4 GHz, DigiMesh, RF Pad Antenna, SMT | | 1
 |
33-2408-05-0150
| Calian | TW2408 Embedded Single Band GNSS Antenna (Pre-filtered), MCX right angle male connector, 0150mm cable | | 1
 |
XB3-24DMPS-J
| Digi International Inc | XBee 3 - 2.4 GHz, DigiMesh, PCB Antenna, SMT | | 0
 |
SISPM1040-3248-L3-NA
| Lantronix Inc | Layer 3 Managed Hardened PoE+ Switch, (24) 10/100/1000Base-T PoE+, (4) 100/1000 SFP, (4) 1G/10G SFP+, NA PC | | 0
 |
AM1DM-0324DH60EZ
| Aimtec | RoHS : Compliant | | 0
 |
AM1LS-0324DEZTR
| Aimtec | RoHS : Compliant | | 0
 |
AM1SS-0324SEZ
| Aimtec | RoHS : Compliant | | 0
 |
AM1DS-0324SH30LPZ
| Aimtec | RoHS : Compliant | | 0
 |
AISC-Q0603-24NK-T
| Abracon Corporation | RoHS : Compliant | | 0
 |
AM1S-0324SH30Z
 | Aimtec | RoHS : Compliant | | 0
 |
XB3-24Z8CM
| Digi International Inc | XBee3 PRO ,2.4 Ghz ZB 3.0, Chip Ant, MMT RoHS : Compliant | | 0
 |
XB3-24Z8US-J
| Digi International Inc | XBee3 - 2.4 GHz ZB 3.0, U.FL Antenna Connector, SMT RoHS : Compliant | | 0
 |
XB3-24DMPT
| Digi International Inc | XBee3 PRO - 2.4 GHz, DigiMesh, PCB Antenna, TH | | 0
 |
AM1LS-0324DLPZTR
| Aimtec | RoHS : Compliant | | 0
 |
33-2410-10-0080
| Calian | TW2410 magnet mount GPS/GLONASS, 80mm cable, SMA R/A connector | | 0
 |
 Component Electronics, Inc | CRCW060324R0JNTA
| Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Not Compliant | 1,000 : $0.05 100 : $0.06 1 : $0.08
|
| 9,000
 |
CR0603F3242T1LF
| Chip Technologies Inc | IN STOCK SHIP TODAY | 1,000 : $0.08 100 : $0.09 1 : $0.12
|
| 5,000
 |
MF55C3243F
| ASJ Holdings Limited | IN STOCK SHIP TODAY | 1,000 : $0.1 100 : $0.12 1 : $0.15
|
| 5,000
 |
CRCW06032493FRT1
| Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Not Compliant | 1,000 : $0.05 100 : $0.06 1 : $0.08
|
| 2,800
 |
324-AG40D
| TE Connectivity | IN STOCK SHIP TODAY | | 1,500
 |
C31758-1032-4
| | IN STOCK SHIP TODAY | | 100
 |
38324
| Monoprice | IN STOCK SHIP TODAY | 1,000 : $1.5 100 : $1.73 1 : $2.31
|
| 83
 |
MF-55-3.24K-1%T-1B14
| Philips Semiconductors | IN STOCK SHIP TODAY | 1,000 : $0.25 100 : $0.29 1 : $0.38
|
| 77
 |
2306-187-23242
| Philips Semiconductors | IN STOCK SHIP TODAY | 1,000 : $0.33 100 : $0.38 1 : $0.5
|
| 37
 |
2W324
| NTE Electronics Inc | IN STOCK SHIP TODAY RoHS : Unknown | 1,000 : $0.75 100 : $0.87 1 : $1.15
|
| 35
 |
ACF451832-472-TD01
| TDK Corporation | IN STOCK SHIP TODAY RoHS : Compliant | 1,000 : $0.38 100 : $0.43 1 : $0.58
|
| 23
 |
SN74LVCC3245APWR
 | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant | 1,000 : $0.75 100 : $0.87 1 : $1.15
|
| 12
 |
324-AG40D
| RN | IN STOCK SHIP TODAY | | 10
 |
P5-D121324
| OTTO Engineering Inc | IN STOCK SHIP TODAY RoHS : Compliant | 1,000 : $25.0 100 : $28.85 1 : $38.46
|
| 2
 |
4-1393249-9
| TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant | 1,000 : $5.0 100 : $5.77 1 : $7.69
|
| 2
 |
 DB Roberts | D8-324-101-200
| Southco | | 1 : $0.2206 100 : $0.2206 500 : $0.1598 1,000 : $0.1409
|
| 3,567
 |
3249
| Heyco | FLEX LTF 16 BLACKW/3173 NUT | | 5
 |
SOA-8143-24
| PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Unthreaded standoffs are also available for spacing multi-panel assemblies. | | 0
 |
SOAG-8632-4
| PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Types SOAG and SOSG grounding standoffs are designed for clinching into steel or a | | 0
 |
1251324
| Essentra Components | | | 0
 |
1332-4-A
| RAF Electronic Hardware | | | 0
 |
12032493
| Avdel | SA NOSEPIECE 414 TRM00823 | | 0
 |
33248
| Avdel | M5UPO55ST ZINKTOP 3K | | 0
 |
ESR-DC4513-24
| Sugatsune Kogyo Co Ltd | | | 0
 |
53-17-913-24
| Southco | | | 0
 |
4032-4
| HeliCoil | | | 0
 |
4032-440-A
| RAF Electronic Hardware | | | 0
 |
47-13-242-55
| Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | | 0
 |
47-82-324-54
| Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | | 0
 |
FHA-832-4
| PennEngineering (PEM) | PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly | | 0
 |
 EBV Elektronik | LM324PT
 | STMicroelectronics | Operational Amplifier Quad 4 Channels 13 MHz 04 Vs 15V to 16V TSSOP 14 Pins (Alt: LM324PT) RoHS : Compliant | | 760,000
 |
LM324DT
 | STMicroelectronics | Operational Amplifier Quad 4 Channels 13 MHz 04 Vs 3V to 30V SOIC 14 Pins (Alt: LM324DT) RoHS : Compliant | | 127,500
 |
ATMEGA324PA-ANR
 | Microchip Technology Inc | MCU 8Bit ATmega AVR RISC 32KB Flash 25V33V5V 44Pin TQFP TR (Alt: ATMEGA324PA-ANR) RoHS : Compliant | | 124,000
 |
LM324ADT
 | STMicroelectronics | Operational Amplifier 4 Channels 13 MHz 04 Vus 3 V to 30 V 15 V to 15 V 14 Pins SOIC (Alt: LM324ADT) RoHS : Compliant | | 115,000
 |
LMV324LIPT
 | STMicroelectronics | Operational Amplifier 4 Channels 13 MHz 07 Vs 27V to 55V TSSOP 14 Pins (Alt: LMV324LIPT) RoHS : Compliant | | 75,000
 |
ATMEGA324P-20AURA0
| Microchip Technology Inc | 8bit MCU AVR 20 MHz 32 KB 2 KB 44 Pins TQFP (Alt: ATMEGA324P-20AURA0) RoHS : Compliant | | 60,000
 |
LM324D
 | STMicroelectronics | Operational Amplifier 4 Channels 13 MHz 04 Vus 3 V to 30 V 15 V to 15 V 14 Pins SOIC (Alt: LM324D) RoHS : Compliant | | 43,650
 |
PIC16F18324T-I/JQ
| Microchip Technology Inc | MCU 8Bit PIC16 PIC RISC 7KB Flash 33V5V 16Pin UQFN EP TR (Alt: PIC16F18324T-I/JQ) RoHS : Compliant | | 16,500
 |
LMX324IPT
 | STMicroelectronics | OP Amp Quad GP RR OP 55V 14Pin TSSOP TR (Alt: LMX324IPT) RoHS : Compliant | | 10,000
 |
IRFH8324TRPBF
| Infineon Technologies AG | Trans MOSFET NCH 30V 23A 8Pin PQFN EP TR (Alt: SP001556492) RoHS : Compliant | | 8,000
 |
SIP32409DNP-T1-GE4
| Vishay Intertechnologies | Power Load Distribution Switch Active High 1 Output 55V 23A 45mohm TDFN4 Pins (Alt: SIP32409DNP-T1-GE4) RoHS : Compliant | | 6,000
 |
AT89S8253-24JU
 | Microchip Technology Inc | 8 Bit MCU 8051 Family AT89S8253 Series Microcontrollers 8051 24 MHz 12 KB 44 Pins LCC (Alt: AT89S8253-24JU) RoHS : Compliant | | 3,618
 |
LM324DT
 | STMicroelectronics | Operational Amplifier Quad 4 Channels 13 MHz 04 Vs 3V to 30V SOIC 14 Pins (Alt: LM324DT) RoHS : Compliant | | 2,500
 |
LMV324IYPT
 | STMicroelectronics | Operational Amplifier 4 Channels 1 MHz 045 Vs 27V to 6V TSSOP 14 Pins (Alt: LMV324IYPT) RoHS : Compliant | | 2,500
 |
ELUA3535OG5-P0010U23240500-VD1M
| Everlight Electronics Co Ltd | LED Single Chip Ultraviolet 1000mA 3Pin CSMD TR (Alt: H110005194) RoHS : Compliant | | 400
 |
 Flip Electronics | SP3243EBEA-L
| MaxLinear Inc | Stock | | 73,500
 |
74LVXC3245QSCX
| onsemi | Stock, Ship Today RoHS : Compliant | | 7,500
 |
NTMFS4C324NT1G
| onsemi | Stock, Ship Today RoHS : Compliant | | 6,000
 |
CYW43242KFFBG
| Infineon Technologies AG | Stock, Ship Today | | 4,526
 |
CY8C27543-24AXI
| Infineon Technologies AG | Stock, Ship Today RoHS : Compliant | | 2,599
 |
LM324EDR2G
| onsemi | Stock, Ship Today RoHS : Compliant | | 2,152
 |
LPC3240FET296/01
 | NXP Semiconductors | Stock RoHS : Compliant | | 1,260
 |
D12324SVF25V
 | Renesas Electronics Corporation | Stock RoHS : Compliant | | 1,192
 |
CY8C24633-24PVXI
| Infineon Technologies AG | Stock, Ship Today RoHS : Compliant | | 1,107
 |
CY8C23533-24LQXI
| Infineon Technologies AG | Stock, Ship Today RoHS : Compliant | | 572
 |
CY8C3244PVI-133
| Infineon Technologies AG | Stock, Ship Today RoHS : Compliant | | 482
 |
BCM3248KPBG
| Broadcom Limited | Stock, Ship Today | | 374
 |
PVA3324NSPBF
| Infineon Technologies AG | Stock RoHS : Compliant | | 200
 |
MPC574XG-324DS
| NXP Semiconductors | Stock | | 18
 |
CY8C3244LTI-123
| Infineon Technologies AG | Stock, Ship Today RoHS : Compliant | | 3
 |
 Neutron USA | 0203247
| Phoenix Contact | Terminal Block Tools & Accessories FIXED BRIDGE 10-POS RoHS : Compliant | | 35
 |
FLS400-1324-SF
| Bel Power Solutions | 400 Watt AC/DC Power Supply | | 11
 |
3247055
| Phoenix Contact | Feed-througterm block;Screw conn;AWG:2-300;107.3mm;yellow/black;NS35/15 NS32 RoHS : Compliant | | 6
 |
19433240251
| HARTING Technology Group | Heavy Duty Power Connectors HAN-ECO 24B O SMT HS SNG LVR 1XM25 W GLAN RoHS : Compliant | | 5
 |
P5-D121324
| OTTO Engineering Inc | Pushbutton Switches Alternate Action Dome Pushbutton Switch RoHS : Compliant | | 5
 |
3FS-324
| Tamura Corporation of America | Power Transformers 24VCT@0.1A 12V@0.2A Single Primary RoHS : Compliant | | 3
 |
P4-324122
| OTTO Engineering Inc | Switch Actuators Momentary Turret DPDT 8 Term Black RoHS : Compliant | | 3
 |
TRI 3-2413
| Traco Power | DC-DC Converter; Encapsulated; 2:1 Input; 3W; 15V@235mA; 18-36V In | | 0
 |
TRN 3-2421SM
| Traco Power | Isolated DC/DC Converters 18-36Vin +/-5Vout 3W +/-300mA Iso Reg SMT | | 0
 |
TDR 3-2412SM
| Traco Power | Isolated DC/DC Converters | | 0
 |
TEL 3-2411
| Traco Power | Isolated DC/DC Converters, 18 36 VDCin, 3W 5VDC 0.6A, DIP TH | | 0
 |
04013-2-4039
| ebm-papst | Fan Accessories Metal Finger Guard For W2E143/144 | | 0
 |
19433240738
| HARTING Technology Group | Heavy Duty Power Connectors Han-Eco 24B Hood Double Lever RoHS : Compliant | | 0
 |
6324G2
| Anderson Power Products | Heavy Duty Power Connectors SB350 GREEN 4/0 AWG 4/0 AWG 350A CONT RoHS : Compliant | | 0
 |
P2HZ X3 24VDC 2N/O 1N/C
| Pilz International | Power Supply, AC-DC, Supply Voltage: 24VDC, Instantaneous Contacts: 2 NO | | 0
 |
 Pasternack Enterprises US | PE3W05324/HS
| Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. N Male Right Angle to Reverse Polarity TNC Male Cable Using LMR-240-UF Coax with HeatShrink. PE3W05324/HS is a N male right angle to reverse polarity TNC male cable using LMR-240-UF coax. This Pasternack N male right angle to reverse polarity TNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm TNC for connector 2. N right angle to TNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to reverse polarity male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W05324/HS N male right angle to TNC reverse polarity male cable assembly is constructed with LMR-240-UF coax, * LMR™ is a trademark of Times Microwave Systems. | | 12,765
 |
PE3W13240/HS
| Pasternack Enterprises | Key Specifications, Connector 1 Series: QMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: QMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm. QMA Male to QMA Male Low Loss Cable Using LMR-195-UF Coax with HeatShrink., Radio frequency assembly QMA male to QMA male low loss cable using LMR-195-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The QMA male to QMA male low loss cable using LMR-195-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom QMA to QMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a QMA cable connection on one end and a QMA cable connection on the other. Our low loss QMA to QMA cable assembly has a male gender on end 1 and a male on end 2. PE3W13240/HS can also be known as a low loss QMA plug to QMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W13240/HS RF cable has a TPE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 74% and a minimum RF shielding of 90 dB. Our QMA male to QMA male cable has a maximum VSWR of 1.15:1. QMA plug to QMA plug cable assembly PE3W13240/HS is built with LMR-195-UF which is a flexible coax type. The Pasternack flexible QMA cable assembly is manufactured with QMA to QMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss QMA plug to QMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality QMA to QMA cable assembly for quick shipment worldwide. Variations of QMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal QMA to QMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | | 1,425
 |
PE410-06573-242
| Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: TRB, Connector Gender: Plug, Impedance: 78 Ohm, Body Style: Straight, Attachment Method: Crimp/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 500 MHz, Interface Type 1: 30-02002, Interface Type 2: TWAC-78-1F2. 78 Ohm TRB Plug 1553 Connector Crimp/Solder Attachment for 30-02002, TWAC-78-1F2,. PE410-06573-242 TRB plug coaxial connector has an interface type of TRB plug 30-02002, TWAC-78-1F2 and a 78 Ohm impedance.Pasternack TRB plug connector uses shield/contact crimp/solder as an attachment method. Our plug TRB coaxial connector provides a minimum frequency of DC and a maximum frequency of 500 MHz. The Pasternack TRB coaxial connector has a brass body with nickel plating. This TRB plug coaxial RF connector is REACH compliant. Our high quality PE410-06573-242 features a ASTM-B-733 body plating specification. We also build TRB custom connector cable assemblies that will ship the same day as well. Our TRB plug connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. For further information on similar products, our expert technical support and trained sales team can get you to the perfect RF connector as per your requirement. | 1 : $51.39 25 : $48.82 50 : $46.25 100 : $44.2
|
| 484
 |
PE3C4393-24
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 24 inches. SMA Female to SSMC Plug Cable 24 Inch Length Using RG178 Coax., Radio frequency assembly SMA female to SSMC plug cable 24 inch length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female to SSMC plug cable 24 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SSMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SSMC cable connection on the other. Our SMA to SSMC cable assemblies have a female gender on end 1 and plug on end 2. This SMA to SSMC cable is a female to plug coax assembly, PE3C4393-24, can also be known as a SMA jack to SSMC male cable assembly and will be shipped same-day as it is purchased. SMA jack to SSMC male cable assembly PE3C4393-24 is built with RG178 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SSMC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 2 GHz maximum frequency SMA female to SSMC plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4393-24 can also be used in the other direction and will be SSMC plug to SMA female cable assembly if the opposite connectivity is required. SMA jack to SSMC male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SSMC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to SSMC plug cable 24 inch length using RG178 coax. | 1 : $111.99 25 : $106.39 50 : $100.79 100 : $96.31
|
| 104
 |
PE3C3243-24
| Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P300LL, RF Cable Type: PE-P300LL, RF Cable Impedance: 50 Ohm, Length: 24 inches. N Male Right Angle to TNC Male Low Loss Test Cable 24 Inch Length Using PE-P300LL Coax., Radio frequency assembly N male right angle to TNC male low loss test cable 24 inch length using PE-P300LL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male right angle to TNC male low loss test cable 24 inch length using PE-P300LL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss test cable assembly is built with right angle type N cable connection on one end and TNC cable connection on the other. Our low loss test right angle N type to TNC cable assemblies have a male gender on end 1 and male on end 2. This N type to TNC cable is a male to male coax assembly, PE3C3243-24, can also be known as a low loss test right angle type N plug to TNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to TNC plug cable assembly PE3C3243-24 is built with PE-P300LL which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to TNC cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency N type right angle male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3243-24 can also be used in the other direction and will be TNC male to right angle type N male cable assembly if the opposite connectivity is required. Low loss test N type right angle plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to TNC male low loss test cable 24 inch length using PE-P300LL coax. | 1 : $723.99 25 : $687.79 50 : $651.59
|
| 97
 |
PE3C4332-48
| Pasternack Enterprises | | 1 : $222.99 25 : $211.84 50 : $200.69 100 : $191.77
|
| 17
 |
PE3M0303-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Size: 12, Connector 1 Gender: Socket, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR047FL, RF Cable Type: Coax, RF Cable Specification: PE-SR047FL datasheet, RF Cable Impedance : 50 Ohm. SMPM Size 12 D38999 Contact Socket to SMA Male Cable 24 Inch Length Using PE-SR047FL Coax with HeatShrink, LF Solder. The PE3M0303-24 from Pasternack is a D38999 contact cable assembly that is built with a size 12 mini SMP socket contact connection on one end and a SMA male connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This mini SMP to SMA cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. This radio frequency cable assembly can withstand temperatures ranging from -65 to 100 degrees C. Our mini SMP socket to SMA male cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. Mini SMP socket to SMA male cable assembly is built with PE-SR047FL, which is a formable coax type. The Pasternack PE3M0303-24 formable cable assembly has a 50 Ohm impedance and is single shielded. Additional dimensions, specifications, and CAD drawings for this mini SMP to SMA RF cable are available on our downloadable PDF datasheet. Mini SMP socket to SMA male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of mini SMP and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to SMA RF cable assembly as per your requirements. | 1 : $203.99 10 : $195.83 25 : $187.67 100 : $179.51
|
| 5
 |
PE3C2153-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Male to BNC Male Cable 24 Inch Length Using RG223 Coax., Radio frequency assembly N male to BNC male cable 24 inch length using RG223 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male to BNC male cable 24 inch length using RG223 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with N type cable connection on one end and BNC cable connection on the other. Our type N to BNC cable assembly has male gender on end 1 and male on end 2. PE3C2153-24 can also be known as a N type plug to BNC plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.000 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. Type N plug to BNC plug cable assembly PE3C2153-24 is built with RG223 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to BNC cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this PE3C2153-24 RF cable are available on our downloadable PDF datasheet.PE3C2153-24 can also be used in the other direction and will be BNC male to type N male cable assembly if the opposite connectivity is required. N type plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to BNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal N RF cable assembly as per your requirements. | 1 : $78.19 25 : $74.28 50 : $70.37 100 : $67.24
|
| 0
 |
PE3C3249/PH180
| Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P300LL, RF Cable Type: PE-P300LL, RF Cable Impedance: 50 Ohm. N Male Right Angle to SMA Male Right Angle Cable Using PE-P300LL Coax with 180 Deg. Clock. PE3C3249/PH180 is a N male right angle to SMA male right angle cable using PE-P300LL coax. This Pasternack N male right angle to SMA male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. N right angle to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C3249/PH180 N male right angle to SMA male right angle cable assembly is constructed with PE-P300LL coax. | | 0
 |
PE3C4023-24
| Pasternack Enterprises | Key Specifications, Connector Series 1: MMBX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 24 inches. Snap-On MMBX Plug to N Female Bulkhead Cable 24 Inch Length Using RG316 Coax., Radio frequency assembly snap-on MMBX plug to N female bulkhead cable 24 inch length using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Snap-on MMBX plug to N female bulkhead cable 24 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMBX to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MMBX cable connection on one end and type N bulkhead cable connection on the other. Our MMBX to type N cable assemblies have a plug gender on end 1 and female on end 2. This MMBX to type N cable is a plug to female coax assembly, PE3C4023-24, can also be known as a MMBX male to type N jack cable assembly and will be shipped same-day as it is purchased. MMBX male to N type jack cable assembly PE3C4023-24 is built with RG316 which is a flexible coax type. The Pasternack flexible MMBX cable assembly is manufactured with MMBX to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency MMBX plug to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4023-24 can also be used in the other direction and will be type N female bulkhead to MMBX plug cable assembly if the opposite connectivity is required. MMBX male to N type jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMBX to type N cable assembly for quick shipment worldwide. Variations of MMBX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this snap-on MMBX plug to N female bulkhead cable 24 inch length using RG316 coax. | 1 : $104.99 25 : $99.74 50 : $94.49 100 : $90.29
|
| 0
 |
PE3M0403-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: BMZ, Connector 1 Size: 8, Connector 1 Gender: Socket, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BMZ, Connector 2 Size: 8, Connector 2 Gender: Socket, Connector 2 Specification: MIL-DTL-38999, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Passivated, RF Cable Part Number: PE-P086, RF Cable Type: Coax, RF Cable Specification: PE-P086 datasheet, RF Cable Impedance : 50 Ohm. BMZ Size 8 Contact Socket (40 GHz) to BMZ Size 8 Contact Socket Cable 24 Inch Length Using PE-P086 Coax with HeatShrink. The PE3M0403-24 from Pasternack is a D38999 contact cable assembly that is built with a size 8 BMZ socket contact connection on one end and a BMZ socket connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This BMZ to BMZ cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. The PE3M0403-24 RF cable has a FEP jacket of 0.104-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 165 degrees C. Our BMZ socket to BMZ socket cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0403-24 in-series RF cable has 0.5 inches of repeated minimum bend radius along with 110 dB of minimum RF shielding. BMZ socket to BMZ socket cable assembly is built with PE-P086, which is a flexible coax type. The Pasternack PE3M0403-24 flexible cable assembly has a 50 Ohm impedance and is double-shielded. Additional dimensions, specifications, and CAD drawings for this BMZ to BMZ RF cable are available on our downloadable PDF datasheet. BMZ socket to BMZ socket cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of BMZ cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMZ to BMZ RF cable assembly as per your requirements. | 1 : $464.99 10 : $446.39 25 : $427.79 100 : $409.19
|
| 0
 |
PE3W21413-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMPS, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P047HF, RF Cable Type: PE-P047HF, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMPS Female to SMA Female VITA 67.3 Cable 24 Inch Length Using PE-P047HF Coax., Pasternack’s PE3W21413-24 VITA 67.3 SMPS female to SMA female RF cable assembly using PE-P047HF coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMPS female to SMA female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMPS to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax VITA 67.3 cable assembly is built with an SMPS cable connection on one end and an SMA cable connection on the other. Our SMPS to SMA cable assembly has a female gender on end 1 and a female on end 2. PE3W21413-24 can also be known as a VITA 67.3 SMPS jack to SMA jack cable assembly and will be shipped the same day as it is purchased. This high flex RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. Our VITA 67.3 cable is designed for use in high-density RF signal transmission applications in aerospace and defense, ground communication systems, radar systems, satellites, and embedded computing applications. This cable assembly employs durable and flexible materials, and with a 0.1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W21413-24 RF cable has an FEP jacket of 0.060-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 165 degrees C. The high flex RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our SMPS female to SMA female cable has a maximum VSWR of 1.4:1. This PE3W21413-24 SMPS jack to SMA jack cable assembly is built with PE-P047HF, which is a high flex coax type. The Pasternack high flex SMPS cable assembly is manufactured with SMPS to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder attachment method, while the other has the solder/solder attachment method and a brass body with gold plating. Additional dimensions, specifications, and CAD drawings for this 24-inch-long VITA 67.3 RF cable are available on our downloadable PDF datasheet. PE3W21413-24 can also be used in the other direction and will be an SMA female to SMPS female cable assembly if the opposite connectivity is required. This VITA 67.3 SMPS jack to SMA jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMPS to SMA cable assembly for quick shipment worldwide. Variations of SMPS and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMPS to SMA VITA 67.3 RF cable assembly as per your requirements. | 1 : $284.99 25 : $270.74 50 : $256.49 100 : $245.09
|
| 0
 |
PE3W13241LF
| Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. N Female to TNC Male Cable Using RG223 Coax, LF Solder. PE3W13241LF is a N female to TNC male cable using RG223 coax. This Pasternack N female to TNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm TNC for connector 2. Our female N to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13241LF N female to TNC male cable assembly is constructed with RG223 coax. | | 0
 |
PE3W17324-36
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Female Bulkhead to MCX Plug Cable 36 Inch Length Using RG316 Coax., Radio frequency assembly SMA female bulkhead to MCX plug cable 36 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female bulkhead to MCX plug cable 36 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to MCX cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA bulkhead cable connection on one end and a MCX cable connection on the other. Our SMA to MCX cable assembly has a female gender on end 1 and a plug on end 2. PE3W17324-36 can also be known as a SMA jack to MCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3W17324-36 RF cable has a FEP jacket of 0.102-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 155 degrees C. The flexible RF cable has a between series connection. Our bulkhead SMA female to MCX plug cable has a maximum VSWR of 1.4:1. SMA jack to MCX male cable assembly PE3W17324-36 is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to MCX cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W17324-36 can also be used in the other direction and will be a MCX plug to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to MCX male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to MCX cable assembly for quick shipment worldwide. Variations of SMA and MCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to MCX RF cable assembly as per your requirements. | 1 : $88.89 25 : $84.45 50 : $80.0 100 : $76.45
|
| 0
 |
PE3W24324
| Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: C, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG8A/U, RF Cable Type: RG8, RF Cable Impedance: 50 Ohm. N Female to C Female Cable Using RG8 Coax. PE3W24324 is a N female to C female cable using RG8 coax. This Pasternack N female to C female cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm C for connector 2. Our female N to female C cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W24324 N female to C female cable assembly is constructed with RG8 coax. | | 0
 |
 Wuhan P&S | MCS04020D3242BE000
| Vishay Intertechnologies | Precision Thin Film Chip Resistors 32.4 k�� ��0.1% 0.063W RoHS : Compliant | 1 : $0.37 100 : $0.13 500 : $0.12 1,000 : $0.11
|
| 50,000
 |
CRCW0402324RFKEDC
| Vishay Intertechnologies | Chip Resistors RoHS : Compliant | 1 : $0.0223 100 : $0.0079 500 : $0.0053 1,000 : $0.0053
|
| 30,000
 |
NTMFS4C324NT1G
| onsemi | N-Channel Power MOSFET RoHS : Compliant | 1 : $0.59 100 : $0.37 500 : $0.31 1,000 : $0.29
|
| 24,000
 |
LMV324DR2G
 | onsemi | Single, Dual, Quad Low-Voltage,Rail-to-Rail Operational Amplifiers RoHS : Compliant | 1 : $0.43 100 : $0.28 500 : $0.23 1,000 : $0.21
|
| 10,000
 |
NCV6324BMTAAWTBG
| onsemi | Buck Converter - Synchronous 3 MHz, 2 A RoHS : Compliant | 1 : $1.45 100 : $0.92 500 : $0.76 1,000 : $0.7
|
| 500
 |