| Electronic Components Datasheet Search |
|
3486PVC Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Avnet Americas | 202A163-4/86-0 | TE Connectivity | - Bag (Alt: 503679-000) RoHS : Compliant |
| 0 | |
| 101A213-4/86-0 | TE Connectivity | - Bag (Alt: 881173-000) RoHS : Compliant |
| 0 | ||
| 202D153-4/86-0 | TE Connectivity | - Bag (Alt: 005087-000) RoHS : Compliant |
| 0 | ||
| 2-2308348-6 | TE Connectivity | Connector Accessory, Crimp Flange, AMP Rail D-Sub Backshells - Bulk (Alt: 2-2308348-6) RoHS : Compliant |
| 0 | ||
| 202D263-4/86-0 | TE Connectivity | - Bag (Alt: 727089-000) RoHS : Compliant |
| 0 | ||
| 202D253-4/86-0 | TE Connectivity | - Bag (Alt: 841189-000) RoHS : Compliant |
| 0 | ||
| 202D253-4/86-0-CS8252 | TE Connectivity | - Bag (Alt: 372419-000) RoHS : Compliant |
| 0 | ||
| 23486R | Vicor Power | - Boxed Product (Development Kits) (Alt: 23486R) RoHS : Not Compliant |
| 0 | ||
| R110434860W | Radiall | MMCX M SMT - Bulk (Alt: R110434860W) RoHS : Compliant |
| 0 | ||
| 202D253-4/86-0-CS8240 | TE Connectivity | - Bag (Alt: 841189N001) RoHS : Compliant |
| 0 | ||
| 2N3486 | Microchip Technology Inc | Trans GP BJT PNP 40V 0.6A 3-Pin TO-46 Bag - Bulk (Alt: 2N3486) RoHS : Not Compliant |
| 0 | ||
| JANTX2N3486A | Microchip Technology Inc | - Bulk (Alt: JANTX2N3486A) RoHS : Not Compliant |
| 0 | ||
| JANTX2N3486A | VPT Components | JANTX2N3486A - Bulk (Alt: JANTX2N3486A) RoHS : Not Compliant |
| 0 | ||
| 151117-3486 | Molex | Pin Header, 36 Contacts, 2 Rows, 2mm, Tin, 2A, Straight, Shrouded, Copper Alloy, Wire-to-Board, THT - Bulk (Alt: 1511173486) RoHS : Compliant |
| 0 | ||
| 493486-2 | TE Connectivity | Conn Housing Wire to Board RCP 6 POS 3.75mm ST Cable Mount - Bag (Alt: 493486-2) RoHS : Not Compliant |
| 0 | ||
![]() Newark | MAX3486ESA+T | Analog Devices Inc | Rs422/Rs485 Txrx, 2.5Mbps, 3.6V, Nsoic-8; |Analog Devices, Inc. MAX3486ESA+T RoHS : Compliant |
| 2,563 | |
| MAX3486ESA+T | Analog Devices Inc | Rs422/Rs485 Txrx, 2.5Mbps, 3.6V, Nsoic-8; |Analog Devices, Inc. MAX3486ESA+T RoHS : Compliant |
| 2,563 | ||
| 953486-1 | TE Connectivity | 32W Mqs Right Angl; |Te Connectivity 953486-1 RoHS : Compliant |
| 877 | ||
| MAX3486EESA+ | Analog Devices Inc | Rs422/Rs485 Transceiver, Half Duplex; |Analog Devices, Inc. MAX3486EESA+ RoHS : Compliant |
| 292 | ||
| MAX3486CSA+ | Analog Devices Inc | Rs422/Rs485 Transceiver, Half Duplex; |Analog Devices, Inc. MAX3486CSA+ RoHS : Compliant |
| 211 | ||
| MAX3486ECSA+ | Analog Devices Inc | Ic, Transceiver, Rs422/Rs485, 8Soic; |Analog Devices, Inc. MAX3486ECSA+ RoHS : Compliant |
| 149 | ||
| 1434-86 | Hammond Manufacturing | Bottom Plate, 8"x6", Aluminium; |Hammond 1434-86 RoHS : Compliant |
| 62 | ||
| FMCA2348-60 | Fairview Microwave Inc | Coax Cable Assembly; |Fairview Microwave FMCA2348-60 RoHS : Not Compliant |
| 42 | ||
| PSG3486-DP-3M | Pro-Signal | 1.2V Displayport M-M Lead 4K 60Hz 3M; |Pro Signal PSG3486-DP-3M RoHS : Compliant |
| 28 | ||
| 09233486921 | HARTING Technology Group | Din 41612 Conn, R/A Plug, 48P, 3R/2.54Mm; |Harting 09233486921 RoHS : Compliant |
| 20 | ||
| B33-53-486 | Brady Worldwide Inc | Adhesive Cable Management Accessories; |Brady B33-53-486 RoHS : Not Compliant |
| 8 | ||
| 3-123-486 | Schurter Electronic Components | |Schurter 3-123-486 RoHS : Not Compliant |
| 4 | ||
| 2813486 | Phoenix Contact | Current Sens, Current O/P, 0-100A, 340Ms; |Phoenix Contact 2813486 RoHS : Compliant |
| 3 | ||
| 24-13486 | SPC Multicomp | Cable, 3.5Mm Mono Plug-2 Jack, 6", Blk; |Multicomp Pro 24-13486 RoHS : Compliant |
| 2 | ||
| 3486 | Keystone Electronics Corp | Spacer/Standoff Round Al 0.375In X 9.5Mm; |Keystone 3486 RoHS : Compliant |
| 0 | ||
![]() RS | 1934861 (PT 1 5/ 2-PVH-5 0) | Phoenix Contact | PCB PLUG SCREW 5MM 16AWG 400V 12A 2 POSITION COMBICON PT SERIES |
| 500 | |
| V1-W-10M-PVC (33486) | PEPPERL+FUCHS GmbH | PEPPERL + FUCHS M12 4-PIN 10M FEMALE CABLE & CONNECTOR FOR USE WITH M12 SENSORS |
| 178 | ||
| 3486 | 80/20 Inc | 1/4-20 X 3/8" SHCS, ECON T-NUT |
| 80 | ||
| 2813486 | Phoenix Contact | MCR CURRENT MEASURING TRANSDUCER (INPUT 0..100A) LOOP POWERED OUTPUT (4..20MA) RoHS : Compliant |
| 22 | ||
| 84134860 (NULL) | Crydom Inc | RELAY, SSR, CONTROL, 15A, CTRL-V 3-32DC, VOL-RTG 1-100DC, UL/CUL, CE, TUV |
| 22 | ||
| 21348600484050 | HARTING Technology Group | M12 CABLE ASSEMBLY A-COD AN/- M/- 5, 0M |
| 20 | ||
| 3486 | Keystone Electronics Corp | STANDOFF, 1/4 ROUND, FEMALE, THREADED 6-32, LENGTH .375, ALUM/CLEAR IRIDITE |
| 12 | ||
| 2834866 | RS Pro | M8 STRAIGHT FEMALE TO ACTUATOR/SENSOR CABLE, 4P4W PVC, 10M |
| 9 | ||
| 34865 (KCC34865) | Kimberly-Clark | WYPALL X60 WIPERS, 1/4-FOLD, HYDROKNIT, WHITE, 12 PACKS |
| 8 | ||
| 2834867 | RS Pro | M12 TO ACTUATOR/SENSOR CABLE, RIGHT ANGLE, FEMALE, 4 WAY, PVC, BLACK. 4M |
| 2 | ||
| 2834860 | RS Pro | M08 FEMALE ST. 3P 3W 6M PUR |
| 2 | ||
| 2834869 | RS Pro | M12 TO ACTUATOR/SENSOR CABLE, RIGHT ANGLE, FEMALE, 4 WAY, PVC, BLACK. 10M |
| 2 | ||
| 2453477 (25533486) (HFI507501000NA-025RS) | RS Pro | 3/4-16 X 1 IN HEX HEAD CAP SCREW, GRADE 5, ZINC PLATED, FINE |
| 2 | ||
| 2453486 (25533514) (HFI508703250NA-015RS) | RS Pro | 7/8-14 X 3 1/4 IN HEX HEAD CAP SCREW, GRADE 5, ZINC PLATED, FINE |
| 1 | ||
| 3486 | Apex Tool Group LLC | GEARWRENCH;PLR SNP RNG .047 STRT |
| 0 | ||
![]() Microchip Technology Inc | JANTXV2N3486A | Microchip Technology Inc | Small-Signal BJT _ TO-46, Projected EOL: 2049-02-05 RoHS : Compliant |
| 743 | |
| 2N3486 | Microchip Technology Inc | Small-Signal BJT _ TO-46, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| 2N3486A | Microchip Technology Inc | Small-Signal BJT _ TO-46, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| JAN2N3486A | Microchip Technology Inc | Small-Signal BJT _ TO-46, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| JANTX2N3486A | Microchip Technology Inc | Small-Signal BJT _ TO-46, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| 2C3486A-MSCL | Microchip Technology Inc | Small-Signal BJT _ Die, Projected EOL: 2049-02-05 |
| 0 | ||
![]() Bisco Industries | 02-3486 | BISCO SELF CLINCHING FASTENERS | 89,870 | |||
| 3486 | Keystone Electronics Corp | 4,238 | ||||
| 5613-48-62 | Seastrom Mfg | 14 | ||||
| MS3348-6-10L | MS Connectors | 5 | ||||
![]() Rochester Electronics | 2SK3486-TD-E | onsemi | MOSFET N-Channel 20V 8A (Ta) PCP RoHS : Compliant |
| 124,000 | |
| MCH3486-TL-H | onsemi | MOSFET N-Channel 60V 2A (Ta) 3-SMD T/R RoHS : Compliant |
| 82,499 | ||
| A2C03348600A | Infineon Technologies AG | STD SPI |
| 1,481 | ||
| LT3486IFE#PBF | Analog Devices Inc | LED Driver ICs DC DC Regulator 1.3A (Switch) 16-SOP Tube RoHS : Compliant |
| 625 | ||
ADM3486EARZ![]() | Analog Devices Inc | IC VOLT REG Fixed Step-Down Buck 1 OUT 2.5V 6A 24-QFN T/R RoHS : Compliant |
| 26 | ||
MC3486D![]() | Texas Instruments | Line Receiver, 2 Func, 4 Rcvr, BIPolar, PDSO16 RoHS : Compliant |
| 6 | ||
DS3486M/NOPB![]() | Texas Instruments | IC INTERFACE Receiver RS422, RS423 10Mbps 4.75V - 5.25V 16-SOIC Tube RoHS : Compliant |
| 18,576 | ||
DS3486M![]() | Texas Instruments | Line Receiver, 4 Func, 4 Rcvr, BIPolar, PDSO16 RoHS : Not Compliant |
| 4,272 | ||
SN65LVDS3486BDR![]() | Texas Instruments | IC INTERFACE Receiver LVDS 400Mbps 3V - 3.6V 16-SOIC T/R RoHS : Compliant |
| 26,717 | ||
SN65LVDT3486BD![]() | Texas Instruments | IC INTERFACE Receiver LVDS 400Mbps 3V - 3.6V 16-SOIC Tube RoHS : Compliant |
| 21,168 | ||
LT3486EDHC#PBF![]() | Linear Technology | LED Driver ICs DC DC Regulator 1.3A (Switch) 16-SON Tube RoHS : Compliant |
| 41 | ||
MAX3486ESA+T![]() | Maxim Integrated Products | IC INTERFACE Transceiver RS422, RS485 2.5Mbps 3V - 3.6V 8-SOIC T/R RoHS : Compliant |
| 672 | ||
| DS3486M | National Semiconductor Corporation | Line Receiver, 4 Func, 4 Rcvr, BIPolar, PDSO16 RoHS : Not Compliant |
| 32,366 | ||
| DS3486M/NOPB | National Semiconductor Corporation | IC INTERFACE Receiver RS422, RS423 10Mbps 4.75V - 5.25V 16-SOIC Tube RoHS : Compliant |
| 3,890 | ||
| 2SK3486-TD-E | SANYO Semiconductor Co Ltd | MOSFET N-Channel 20V 8A (Ta) PCP RoHS : Compliant |
| 80,723 | ||
![]() Sager | 3486 | Keystone Electronics Corp | Standoffs & Spacers RND .250X.375 ALUM |
| 0 | |
| 2-2308348-6 | TE Connectivity | D-Sub Tools & Hardware CRIMP FLANGE 16 LG RoHS : Not Compliant |
| 0 | ||
| 202D263-4/86-0 | TE Connectivity | Heat Shrink Cable Boots & End Caps HS-BOOT POLY FLEXIBLE RoHS : Compliant |
| 0 | ||
| 134862-1 | TE Connectivity | RF Connectors / Coaxial Connectors EMBASE BNC RoHS : Compliant | 0 | |||
| ASLD3348604DNUY | IDEC Corporation | Pushbutton Switches 30mm TWND Series Diecast Zinc Illuminated Selector Switch 45-3 position LED Transformer RoHS : Compliant |
| 0 | ||
| ASLD3348620DNUG | IDEC Corporation | Pushbutton Switches 30mm TWND Series Diecast Zinc Illuminated Selector Switch 45-3 position LED Transformer RoHS : Compliant |
| 0 | ||
| 101A213-4/86-0 | TE Connectivity | Heat Shrink Cable Boots & End Caps 101A213-4/86-0 |
| 0 | ||
| 202D253-4/86-0 | TE Connectivity | Heat Shrink Cable Boots & End Caps STRAIGHT LIPPED BOOT RoHS : Compliant |
| 0 | ||
| 202D253-4/86-0-CS8252 | TE Connectivity | Heat Shrink Cable Boots & End Caps 202D253-4/86-0-CS8252 |
| 0 | ||
| ASLD3348622DNU-310-A | IDEC Corporation | Pushbutton Switches 30mm TWND Series Diecast Zinc Illuminated Selector Switch 45-3 position LED Transformer RoHS : Compliant |
| 0 | ||
| ASLD3348640DNUS | IDEC Corporation | Pushbutton Switches 30mm TWND Series Diecast Zinc Illuminated Selector Switch 45-3 position LED Transformer RoHS : Compliant |
| 0 | ||
| 8-2151348-6 | TE Connectivity | Bench Top Tools OC-PMC-AT-S-N-S | 0 | |||
| 8866013486 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| F34868-000 | TE Connectivity | Hook-up Wire 55/1114-24-9-5 | 0 | |||
| ASLD3348602DNUS | IDEC Corporation | Pushbutton Switches 30mm TWND Series Diecast Zinc Illuminated Selector Switch 45-3 position LED Transformer RoHS : Compliant |
| 0 | ||
![]() TME | 1348698 | Bossard Group | Screw; M3; M3x8; 0.5; Head: button; hex key; HEX 2mm; ISO 7380 |
| 78,000 | |
| 1348663 | Bossard Group | Screw; M3; M3x6; 0.5; Head: button; hex key; HEX 2mm; ISO 7380 |
| 39,500 | ||
| 34861-1416 | Molex | Contact; female; Automotive; copper alloy; tinned; soldering; 1.5A |
| 13,520 | ||
MC3486N![]() | Texas Instruments | IC: interface; line receiver; RS422 / RS423; DIP16; 4.75÷5.25VDC RoHS : Compliant |
| 275 | ||
| 3486 | Keystone Electronics Corp | Screwed spacer sleeve; 9.53mm; Int.thread: UNC6-32; cylindrical |
| 0 | ||
| MIKROE-3486 | MikroElektronika | Multiadapter; MK24FN256VDC12; prototype board; 256kBRAM; 120MHz |
| 0 | ||
| GN 113.4-8-60 | Elesa+Ganter | Locking pin; without handle,with locking; stainless steel; 63kN |
| 0 | ||
| 020-3486 | Gems Sensors & Controls | Automation module: signaller; Control.param: fluid flow; 19l/min |
| 0 | ||
| 09063486901222 | HARTING Technology Group | Contact; male; gold-plated; type F; THT; 6A; straight; UL94V-0 RoHS : Compliant |
| 0 | ||
| 21348600C79005 | HARTING Technology Group | Connector: M12; plug; PIN: 12; male; industrial; angled 90°; cables |
| 0 | ||
| 21348600C79050 | HARTING Technology Group | Connector: M12; plug; PIN: 12; male; industrial; angled 90°; cables |
| 0 | ||
84134860![]() | Crydom Inc | Relay: solid state; Ucntrl: 3.5÷32VDC; 15A; 1÷100VDC; GN RoHS : Compliant |
| 0 | ||
| 09033486943 | HARTING Technology Group | Connector: DIN 41612; PIN: 48 |
| 0 | ||
| 09033486942 | HARTING Technology Group | Connector: DIN 41612; male; PIN: 48; straight; THT; Type: C RoHS : Compliant |
| 0 | ||
| 09233486951 | HARTING Technology Group | Contact; male; gold-plated; C2; THT; 2A; angled; UL94V-0; -55÷125°C RoHS : Compliant |
| 0 | ||
![]() Ameya Holding Limited | SN65LVDS3486DR![]() | Texas Instruments | IC DIFF RECEIVER H-S 16-SOIC RoHS : Compliant | 39,763 | ||
SN65LVDS3486BDR![]() | Texas Instruments | IC QUAD LVDS RECEIVER 16-SOIC RoHS : Compliant | 33,194 | |||
SN65LVDT3486BDR![]() | Texas Instruments | IC QUAD LVDS RECEIVER 16-SOIC RoHS : Compliant | 25,197 | |||
SN65LVDT3486BD![]() | Texas Instruments | IC DIFF RECEIVER H-S 16-SOIC RoHS : Compliant | 11,808 | |||
SN65LVDS3486D![]() | Texas Instruments | SN65LVDS3486D 四 100Mbit/s LVDS 接收器, 3 → 3.6 V, 16针 SOIC封装 RoHS : Compliant | 11,152 | |||
| MAX3486EESA+T | Analog Devices Inc | MAX3486E Series 2.5Mbps 3.6 V Half-Duplex SMT RS 485 Transceiver - SOIC-8 RoHS : Compliant | 10,000 | |||
| 3486 | Keystone Electronics Corp | ROUND STANDOFF 6-32 ALUM 3/8" | 1,353 | |||
![]() ComSIT USA | BFC237348684 | Vishay Intertechnologies | DC FILM CAPACITOR Film Capacitor, Polyester, 250V, 5% +Tol, 5% -Tol, 0.68uF, Through Hole Mount, 6928 RoHS : Compliant | 11,200 | ||
| MAL204348689E3 | Vishay Intertechnologies | ALUMINUM ELECTROLYTIC CAPACITOR Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 385V, 50% +Tol, 10% -Tol, 68uF, Through Hole Mount RoHS : Compliant | 600 | |||
| DS3486M | National Semiconductor Corporation | QUAD RS-422, RS-423 LINE RECEIVER Line Receiver, 4 Func, 4 Rcvr, BIPolar, PDSO16 RoHS : Not Compliant | 326 | |||
MC3486D![]() | Texas Instruments | QUADRUPLE DIFFERENTIAL LINE RECEIVER WITH 3-STATE OUTPUT Line Receiver, 2 Func, 4 Rcvr, BIPolar, PDSO16 RoHS : Compliant | 202 | |||
| 9063486901 | HARTING Technology Group | MALE CONNECTOR WITH ANGLED SOLDER PIN Rectangular Power Connector, 48 Contact(s), Male, Solder Terminal RoHS : Compliant | 176 | |||
MAX3486ECSA+![]() | Maxim Integrated Products | Single Transmitter/Receiver RS-422/RS-485 8-Pin SOIC N Tube RoHS : Compliant | 161 | |||
SN65LVDS3486BD![]() | Texas Instruments | LVDS Receiver, 3.3V, 16-SOIC, Texas Instruments RoHS : Not Compliant | 115 | |||
MC3486N![]() | Texas Instruments | QUADRUPLE DIFFERENTIAL LINE RECEIVER WITH 3-STATE OUTPUT Line Receiver, 2 Func, 4 Rcvr, BIPolar, PDIP16 RoHS : Not Compliant | 16 | |||
LT3486EFE![]() | Linear Technology | DUAL 1.3A WHITE LED STEP-UP CONVERTER WITH WIDE DIMMING Dual Switching Controller, Current-mode, 1.3A, 2700kHz Switching Freq-Max, PDSO16 RoHS : Compliant | 15 | |||
HD63486CP64![]() | Hitachi Ltd | Microprocessor Circuit, BICMOS, PQCC68 RoHS : Not Compliant | 7 | |||
![]() Interstate Connecting Components | PP11-61-10.0A-34861-3-V | Sensata Circuit Breakers |
| 34 | ||
| IEG1-34863-15-V | Sensata Circuit Breakers |
| 1 | |||
| 2-2308348-6 | TE Connectivity | CRIMP FLANGE 16 LARGE RoHS : Not Compliant |
| 0 | ||
| 202D263-4/86-0 | TE Connectivity | RoHS : Compliant |
| 0 | ||
| 101A213-4/86-0 | TE Connectivity | 101A213-4/86-0 | 0 | |||
| 202D253-4/86-0 | TE Connectivity | 841189-000 RoHS : Compliant |
| 0 | ||
| 234863-000 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYCTXR40BW00-1006BI RoHS : Compliant | 0 | |||
| T3486400U | Amphenol Sine Systems | MALE RECEPTACLE REAR MOUNT 7S | 0 | |||
| 202D253-4/86-0-CS8252 | TE Connectivity | 202D253-4/86-0-CS8252 | 0 | |||
| 85993486A913 | SOURIAU-SUNBANK | J5961 | 0 | |||
| 202A163-4/86-0 | TE Connectivity | 503679-000 RoHS : Compliant |
| 0 | ||
| 202D253-4/86-0-CS8240 | TE Connectivity | 202D253-4/86-0-CS8240 | 0 | |||
| T 3486 000 | Amphenol Sine Systems | C091A |
| 0 | ||
| 1743486-3 | TE Connectivity | MTII INJECTOR 2P PLUG ASSY RoHS : Compliant | 0 | |||
| 3-2176348-6 | TE Connectivity | CRGCQ 2010 680K 5% RoHS : Compliant |
| 0 | ||
![]() PEI Genesis | 12983486 | SOURIAU-SUNBANK |
| 0 | ||
| MS3348-6-8L | Amphenol Corporation |
| 0 | |||
| MS3348-6-10L | Amphenol Corporation |
| 0 | |||
| 23A03486 | SOURIAU-SUNBANK |
| 0 | |||
| 73-2734863-1 | SOURIAU-SUNBANK |
| 0 | |||
| T3486-000 | Amphenol Tuchel |
| 0 | |||
![]() PUI | 2348-64G00DPN4T-P | 328 | ||||
![]() Richardson RFPD | LT3486EDHC#PBF | Analog Devices Inc | LED Driver 16 Segment 14000uA Supply Current 16-Pi RoHS : Compliant |
| 0 | |
| SI5340A-D13486-GMR | Skyworks Solutions Inc | Fractional Synthesizer Technology Clock Generators RoHS : Compliant | 0 | |||
| LT3486IFE#TRPBF | Analog Devices Inc | LED Driver 16 Segment 14000uA Supply Current 16-Pi RoHS : Compliant |
| 0 | ||
| LT3486IFE#PBF | Analog Devices Inc | LED Driver 16 Segment 14000uA Supply Current 16-Pi RoHS : Compliant |
| 0 | ||
| R110434860 | Radiall | Conn MMCX 0Hz to 6GHz 50Ohm Solder ST SMD RCP Gold RoHS : Compliant |
| 0 | ||
| SI5338N-B03486-GM | Skyworks Solutions Inc | Quad Clock Generator RoHS : Compliant | 0 | |||
| SI5338N-B03486-GMR | Skyworks Solutions Inc | Quad Clock Generator RoHS : Compliant | 0 | |||
| SI5340A-D13486-GM | Skyworks Solutions Inc | SI5340A-D13486-GM RoHS : Compliant | 0 | |||
| LT3486EDHC#TRPBF | Analog Devices Inc | LED Driver 16 Segment 14000uA Supply Current 16-Pi RoHS : Compliant |
| 0 | ||
| LT3486EFE#PBF | Analog Devices Inc | LED Driver 16 Segment 14000uA Supply Current 16-Pi RoHS : Compliant |
| 0 | ||
| LT3486EFE#TRPBF | Analog Devices Inc | LED Driver 16 Segment 14000uA Supply Current Autom RoHS : Compliant |
| 0 | ||
![]() Chip 1 Exchange | SGA-3486Z | SIRNZ | INSTOCK | 2,634 | ||
| SGA3486 | SIRNZ | INSTOCK | 2,577 | |||
| 0348671002 | Molex | INSTOCK | 864 | |||
MC3486DR![]() | Texas Instruments | INSTOCK RoHS : Compliant | 600 | |||
| MC3486P | Motorola Semiconductor Products | INSTOCK RoHS : Not Compliant | 450 | |||
| DS3486N | INSTOCK | 169 | ||||
| DS3486J | INSTOCK | 8 | ||||
| 3486-0036 | Kycon Inc | INSTOCK | 2 | |||
![]() Avnet Abacus | 1733486 | Phoenix Contact | SMKDSP 15 9 SMKDSP159 (Alt: 1733486) RoHS : Compliant | 0 | ||
| 2813486 | Phoenix Contact | MCRSLS100ILP MCRSLS100ILP (Alt: 2813486) RoHS : Compliant | 0 | |||
| 134862-1 | TE Connectivity | (Alt: 134862-1) RoHS : Compliant | 0 | |||
| 1534860000 | Weidmüller Interface GmbH & Co. KG | Conn Terminal Block 2 POS 508mm Solder ST ThruHole 10A Box (Alt: 1534860000) RoHS : Compliant | 0 | |||
| 234863-000 | TE Connectivity | (Alt: 234863-000) RoHS : Compliant | 0 | |||
| T 3486 000 | Amphenol Corporation | Front mounting male receptacle with ring nut hex nut available upon request Contacts included C (Alt: T3486000U) RoHS : Compliant | 0 | |||
| AYF534865T | Panasonic Electronic Components | - Tape and Reel (Alt: AYF534865T) RoHS : Compliant | 0 | |||
| 843486-000 | TE Connectivity | (Alt: 843486-000) RoHS : Compliant | 0 | |||
| 8-2151348-6 | TE Connectivity | (Alt: 8-2151348-6) RoHS : Not Compliant | 0 | |||
| 4-1393486-6 | TE Connectivity | DSubminiature IDC Plug with Grounding Fingers 37 Position Gold Flash Over Palladium Nickel (Alt: 4-1393486-6) RoHS : Compliant | 0 | |||
| 4-1393486-6 | TE Connectivity | DSubminiature IDC Plug with Grounding Fingers 37 Position Gold Flash Over Palladium Nickel (Alt: 4-1393486-6) RoHS : Compliant | 0 | |||
| 1-1102348-6 | TE Connectivity | AMP111023486 (Alt: 1-1102348-6) RoHS : Compliant | 0 | |||
| 6-1393486-1 | TE Connectivity | AMP613934861 (Alt: 6-1393486-1) RoHS : Compliant | 0 | |||
| 5-1393486-7 | TE Connectivity | DSubminiature IDC Connector Female 25Position Gold Over Nickel Contact Blister Pack (Alt: 5-1393486-7) RoHS : Compliant | 0 | |||
| 5-1393486-7 | TE Connectivity | DSubminiature IDC Connector Female 25Position Gold Over Nickel Contact Blister Pack (Alt: 5-1393486-7) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 0348621406 | Molex | Pin Header, 12 Contacts, 2 Rows, 1.27 mm, Gold, Copper Alloy, PCB Header, Straight, Thermoplastic (Alt: 0348621406) RoHS : Compliant | 0 | ||
| 0348612407 | Molex | 14CKT HSAL2 RA UNSEALED HEADER ASSLY (Alt: 0348612407) RoHS : Compliant | 0 | |||
| 0348611306 | Molex | Conn Unsealed HDR 12 POS 1.27mm Solder RA Through Hole (Alt: 0348611306) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | MC3486P | Motorola Semiconductor Products | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 977 | |
| DS3486N | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 219 | ||
| DS3486MX | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 80 | ||
MC3486N![]() | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 53 | ||
| DS3486M | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 39 | ||
HD63486PS32![]() | Hitachi Ltd | IN STOCK SHIP TODAY RoHS : Not Compliant | 32 | |||
| 834869002 | UMI | IN STOCK SHIP TODAY | 22 | |||
| MC33486DH | Motorola Semiconductor Products | IN STOCK SHIP TODAY |
| 17 | ||
![]() DB Roberts | 78030-03486 | Avdel | PUSHER | 0 | ||
| 20834869 | Essentra Components | 0 | ||||
| 3486VB | Heyco | 0 | ||||
| 1348-6-B-5 | RAF Electronic Hardware | 1/4 HEX SPACER 1-1/4 LEN. | 0 | |||
![]() EBV Elektronik | 2N3486A | Microchip Technology Inc | (Alt: 2N3486A) RoHS : Compliant | 0 | ||
![]() Flip Electronics | MCH3486-TL-W | onsemi | Stock, Ship Today RoHS : Compliant |
| 42,000 | |
| SI5340A-D13486-GM | Skyworks Solutions Inc | Stock, Ship Today |
| 908 | ||
| SI5340D-D13486-GM | Skyworks Solutions Inc | Stock | 908 | |||
![]() Master Electronics | 2-2308348-6 | TE Connectivity | CRIMP FLANGE 16 LARGE MOQ Reduction RoHS : Compliant |
| 0 | |
| 202D263-4/86-0 | TE Connectivity | Heat Shrink Boot - Shell Size 63 - 1.720 (43.69mm)/1.340 (34.04mm) Large 1.720 (43.69mm)/0.480 (12.19mm) Small Dia - 8.000 (203.20mm) L - Black. MOQ Reduction RoHS : Compliant |
| 0 | ||
| 134862-1 | TE Connectivity | EMBASE BNC MOQ Reduction RoHS : Compliant |
| 0 | ||
| 3-4868-019A | Eaton Cutler-Hammer | Selector Switch Actuator Suitable for Moeller RMQ RoHS : Compliant |
| 0 | ||
| PP11-61-10.0A-34861-3-V | Sensata Circuit Breakers | SNAPAK® series is a snap-acting hydraulic magnetic circuit protector Push-Pull. RoHS : Compliant |
| 0 | ||
| ASLD3348604DNUY | IDEC Corporation | RoHS : Compliant |
| 0 | ||
| ASLD3348620DNUG | IDEC Corporation | RoHS : Compliant |
| 0 | ||
| 101A213-4/86-0 | TE Connectivity | Heat Shrink Cable Boots & End Caps 101A213-4/86-0 MOQ Reduction RoHS : Compliant |
| 0 | ||
| 202D253-4/86-0 | TE Connectivity | Heat Shrink Flexible Molded Boot ST Polyolefin MOQ Reduction RoHS : Compliant |
| 0 | ||
| 202D253-4/86-0-CS8252 | TE Connectivity | Heat Shrink Molded Boot ST Flexible Polyolefin Black MOQ Reduction RoHS : Compliant |
| 0 | ||
| 3-4868-018A | Eaton Cutler-Hammer | Selector Switch Actuator Suitable for Moeller RMQ RoHS : Compliant |
| 0 | ||
| 2348604-1 | TE Connectivity | RoHS : Compliant |
| 0 | ||
| ASLD3348622DNU-310-A | IDEC Corporation | RoHS : Compliant |
| 0 | ||
| ASLD3348640DNUS | IDEC Corporation | RoHS : Compliant |
| 0 | ||
| ASLD3348602DNUS | IDEC Corporation | RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE34864-72 | Pasternack Enterprises | Key Specifications, Connector Series 1: FME, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length: 72 inches. FME Jack to BNC Male Cable 72 Inch Length Using RG142 Coax., Radio frequency assembly FME jack to BNC male cable 72 inch length using RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. FME jack to BNC male cable 72 inch length using RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FME to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with FME cable connection on one end and BNC cable connection on the other. Our FME to BNC cable assemblies have a jack gender on end 1 and male on end 2. This FME to BNC cable is a jack to male coax assembly, PE34864-72, can also be known as a FME female to BNC plug cable assembly and will be shipped same-day as it is purchased. FME female to BNC plug cable assembly PE34864-72 is built with RG142 which is a flexible coax type. The Pasternack flexible FME cable assembly is manufactured with FME to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this FME jack to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34864-72 can also be used in the other direction and will be BNC male to FME jack cable assembly if the opposite connectivity is required. FME female to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FME to BNC cable assembly for quick shipment worldwide. Variations of FME cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this FME jack to BNC male cable 72 inch length using RG142 coax. |
| 384 | |
| PE34864-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: FME, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length: 60 inches. FME Jack to BNC Male Cable 60 Inch Length Using RG142 Coax., Radio frequency assembly FME jack to BNC male cable 60 inch length using RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. FME jack to BNC male cable 60 inch length using RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FME to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with FME cable connection on one end and BNC cable connection on the other. Our FME to BNC cable assemblies have a jack gender on end 1 and male on end 2. This FME to BNC cable is a jack to male coax assembly, PE34864-60, can also be known as a FME female to BNC plug cable assembly and will be shipped same-day as it is purchased. FME female to BNC plug cable assembly PE34864-60 is built with RG142 which is a flexible coax type. The Pasternack flexible FME cable assembly is manufactured with FME to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this FME jack to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34864-60 can also be used in the other direction and will be BNC male to FME jack cable assembly if the opposite connectivity is required. FME female to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FME to BNC cable assembly for quick shipment worldwide. Variations of FME cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this FME jack to BNC male cable 60 inch length using RG142 coax. |
| 384 | ||
| PE34860-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: FME, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FME, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 12 inches. FME Jack to FME Jack Cable 12 Inch Length Using RG174 Coax., Radio frequency assembly FME jack to FME jack cable 12 inch length using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. FME jack to FME jack cable 12 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FME to FME cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with FME cable connection on one end and FME cable connection on the other. Our FME to FME cable assemblies have a jack gender on end 1 and jack on end 2. This FME to FME cable is a jack to jack coax assembly, PE34860-12, can also be known as a FME female to FME female cable assembly and will be shipped same-day as it is purchased. FME female to FME female cable assembly PE34860-12 is built with RG174 which is a flexible coax type. The Pasternack flexible FME cable assembly is manufactured with FME to FME cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this FME jack to FME jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. FME female to FME female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FME to FME cable assembly for quick shipment worldwide. Variations of FME cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this FME jack to FME jack cable 12 inch length using RG174 coax. |
| 0 | ||
| PE34862LF-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: FME, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length: 12 inches. FME Jack to BNC Male Cable 12 Inch Length Using RG58 Coax, RoHS., Radio frequency assembly FME jack to BNC male cable 12 inch length using RG58 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. FME jack to BNC male cable 12 inch length using RG58 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FME to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with FME cable connection on one end and BNC cable connection on the other. Our FME to BNC cable assemblies have a jack gender on end 1 and male on end 2. This FME to BNC cable is a jack to male coax assembly, PE34862LF-12, can also be known as a FME female to BNC plug cable assembly and will be shipped same-day as it is purchased. FME female to BNC plug cable assembly PE34862LF-12 is built with RG58 which is a flexible coax type. The Pasternack flexible FME cable assembly is manufactured with FME to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this FME jack to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34862LF-12 can also be used in the other direction and will be BNC male to FME jack cable assembly if the opposite connectivity is required. FME female to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FME to BNC cable assembly for quick shipment worldwide. Variations of FME cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this FME jack to BNC male cable 12 inch length using RG58 coax, RoHS. |
| 0 | ||
| PE34866-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: FME, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 12 inches. FME Jack to BNC Male Cable 12 Inch Length Using RG174 Coax., Radio frequency assembly FME jack to BNC male cable 12 inch length using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. FME jack to BNC male cable 12 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FME to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with FME cable connection on one end and BNC cable connection on the other. Our FME to BNC cable assemblies have a jack gender on end 1 and male on end 2. This FME to BNC cable is a jack to male coax assembly, PE34866-12, can also be known as a FME female to BNC plug cable assembly and will be shipped same-day as it is purchased. FME female to BNC plug cable assembly PE34866-12 is built with RG174 which is a flexible coax type. The Pasternack flexible FME cable assembly is manufactured with FME to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this FME jack to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34866-12 can also be used in the other direction and will be BNC male to FME jack cable assembly if the opposite connectivity is required. FME female to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FME to BNC cable assembly for quick shipment worldwide. Variations of FME cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this FME jack to BNC male cable 12 inch length using RG174 coax. |
| 0 | ||
| PE33486-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to SMA Male Cable 24 Inch Length Using RG393 Coax., Radio frequency assembly SMA male to SMA male cable 24 inch length using RG393 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable 24 inch length using RG393 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assembly has male gender on end 1 and male on end 2. PE33486-24 can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PTFE dielectric type. SMA plug to SMA plug cable assembly PE33486-24 is built with RG393 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE33486-24 RF cable are available on our downloadable PDF datasheet. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE34860LF-72 | Pasternack Enterprises | Key Specifications, Connector Series 1: FME, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FME, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 72 inches. FME Jack to FME Jack Cable 72 Inch Length Using RG174 Coax, RoHS., Radio frequency assembly FME jack to FME jack cable 72 inch length using RG174 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. FME jack to FME jack cable 72 inch length using RG174 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FME to FME cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with FME cable connection on one end and FME cable connection on the other. Our FME to FME cable assemblies have a jack gender on end 1 and jack on end 2. This FME to FME cable is a jack to jack coax assembly, PE34860LF-72, can also be known as a FME female to FME female cable assembly and will be shipped same-day as it is purchased. FME female to FME female cable assembly PE34860LF-72 is built with RG174 which is a flexible coax type. The Pasternack flexible FME cable assembly is manufactured with FME to FME cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this FME jack to FME jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. FME female to FME female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FME to FME cable assembly for quick shipment worldwide. Variations of FME cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this FME jack to FME jack cable 72 inch length using RG174 coax, RoHS. |
| 0 | ||
| PE33486-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to SMA Male Cable 36 Inch Length Using RG393 Coax., Radio frequency assembly SMA male to SMA male cable 36 inch length using RG393 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable 36 inch length using RG393 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assembly has male gender on end 1 and male on end 2. PE33486-36 can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PTFE dielectric type. SMA plug to SMA plug cable assembly PE33486-36 is built with RG393 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE33486-36 RF cable are available on our downloadable PDF datasheet. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE34861LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm. TNC Female Bulkhead to SMB Plug Right Angle Cable Using RG400 Coax with HeatShrink, RoHS. PE34861LF/HS is a TNC female bulkhead to SMB plug right angle cable using RG400 coax. This Pasternack TNC female bulkhead to SMB plug right angle cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMB for connector 2. TNC to SMB right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female TNC bulkhead to plug SMB right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE34861LF/HS TNC female bulkhead to SMB plug right angle cable assembly is constructed with RG400 coax. | 0 | |||
| PE34866LF-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: FME, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 60 inches. FME Jack to BNC Male Cable 60 Inch Length Using RG174 Coax, RoHS., Radio frequency assembly FME jack to BNC male cable 60 inch length using RG174 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. FME jack to BNC male cable 60 inch length using RG174 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FME to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with FME cable connection on one end and BNC cable connection on the other. Our FME to BNC cable assemblies have a jack gender on end 1 and male on end 2. This FME to BNC cable is a jack to male coax assembly, PE34866LF-60, can also be known as a FME female to BNC plug cable assembly and will be shipped same-day as it is purchased. FME female to BNC plug cable assembly PE34866LF-60 is built with RG174 which is a flexible coax type. The Pasternack flexible FME cable assembly is manufactured with FME to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this FME jack to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34866LF-60 can also be used in the other direction and will be BNC male to FME jack cable assembly if the opposite connectivity is required. FME female to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FME to BNC cable assembly for quick shipment worldwide. Variations of FME cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this FME jack to BNC male cable 60 inch length using RG174 coax, RoHS. |
| 0 | ||
| PE33486 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Cable Using RG393 Coax., Radio frequency assembly SMA male to SMA male cable using RG393 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable using RG393 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assembly has male gender on end 1 and male on end 2. PE33486 can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PTFE dielectric type. SMA plug to SMA plug cable assembly PE33486 is built with RG393 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE33486 RF cable are available on our downloadable PDF datasheet. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. | 0 | |||
| PE33486/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE34863LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: Mini UHF, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Mini UHF, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. Mini UHF Female to Mini UHF Male Cable Using RG58 Coax with HeatShrink, LF Solder. PE34863LF/HS is a Mini UHF female to Mini UHF male cable using RG58 coax. This Pasternack Mini UHF female to Mini UHF male cable assembly uses a 50 Ohm Mini UHF for connector 1 and a 50 Ohm Mini UHF for connector 2. Our female Mini UHF to male Mini UHF cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE34863LF/HS Mini UHF female to Mini UHF male cable assembly is constructed with RG58 coax. | 0 | |||
| PE3348-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: SC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length: 60 inches. SC Male to SC Male Cable 60 Inch Length Using RG223 Coax., Radio frequency assembly SC male to SC male cable 60 inch length using RG223 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SC male to SC male cable 60 inch length using RG223 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SC to SC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SC cable connection on one end and SC cable connection on the other. Our SC to SC cable assemblies have a male gender on end 1 and male on end 2. This SC to SC cable is a male to male coax assembly, PE3348-60, can also be known as a SC plug to SC plug cable assembly and will be shipped same-day as it is purchased. SC plug to SC plug cable assembly PE3348-60 is built with RG223 which is a flexible coax type. The Pasternack flexible SC cable assembly is manufactured with SC to SC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SC male to SC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SC plug to SC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SC to SC cable assembly for quick shipment worldwide. Variations of SC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SC male to SC male cable 60 inch length using RG223 coax. |
| 0 | ||
| PE34860LF-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: FME, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FME, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 48 inches. FME Jack to FME Jack Cable 48 Inch Length Using RG174 Coax, RoHS., Radio frequency assembly FME jack to FME jack cable 48 inch length using RG174 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. FME jack to FME jack cable 48 inch length using RG174 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FME to FME cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with FME cable connection on one end and FME cable connection on the other. Our FME to FME cable assemblies have a jack gender on end 1 and jack on end 2. This FME to FME cable is a jack to jack coax assembly, PE34860LF-48, can also be known as a FME female to FME female cable assembly and will be shipped same-day as it is purchased. FME female to FME female cable assembly PE34860LF-48 is built with RG174 which is a flexible coax type. The Pasternack flexible FME cable assembly is manufactured with FME to FME cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this FME jack to FME jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. FME female to FME female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FME to FME cable assembly for quick shipment worldwide. Variations of FME cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this FME jack to FME jack cable 48 inch length using RG174 coax, RoHS. |
| 0 | ||
![]() Vyrian | MAX3486EESA+ | Analog Devices Inc | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, PDSO8 RoHS : Compliant | 9,781 | ||
| LT3486IFE-PBF | Analog Devices Inc | 9,771 | ||||
SN65LVDS3486DRG4![]() | Texas Instruments | Line Receiver, 4 Func, 4 Rcvr, PDSO16 RoHS : Compliant | 9,530 | |||
DS3486MX![]() | Texas Instruments | Line Receiver, 4 Func, 4 Rcvr, BIPolar, PDSO16 RoHS : Not Compliant | 8,926 | |||
| MAX13486EELA-T | Analog Devices (Maxim Integrated) | 7,686 | ||||
| MAX3486CSA+T | Analog Devices Inc | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8 RoHS : Compliant | 7,670 | |||
| MAX3486CSA+ | Analog Devices Inc | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8 RoHS : Compliant | 7,063 | |||
| LT3486EDHC#PBF | Analog Devices Inc | Dual Switching Controller, Current-mode, 1.3A, 2700kHz Switching Freq-Max, PDSO16 RoHS : Compliant | 6,874 | |||
| 1733486 | Phoenix Contact | Barrier Strip Terminal Block, 17.5A, 1.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 6,560 | |||
| 2N3486 | Texas Instruments | Small Signal Bipolar Transistor, 0.6A I(C), 40V V(BR)CEO, 1-Element, PNP, Silicon, TO-46 RoHS : Not Compliant | 5,301 | |||
| MC3486N3 | Texas Instruments | Line Driver/Receiver, BIPolar, PDIP16 RoHS : Not Compliant | 4,493 | |||
| 2813486 | Phoenix Contact | Sensors/Detector Modules RoHS : Compliant | 4,303 | |||
| 103486A | Micron Technology, Inc | 4,186 | ||||
| 103486G | Micron Technology, Inc | 2,688 | ||||
| MSS7348-683MEB | Coilcraft Inc | General Purpose Inductor, 68uH, 20%, 1 Element, Ferrite-Core, SMD, 2828 RoHS : Compliant | 808 | |||
![]() Win Source Electronics | MAX3486ECSA![]() | Maxim Integrated Products | IC TXRX RS485/422 2.5MBPS 8SOIC RoHS : Not Compliant |
| 10,000 | |
MAX3486ECSA+T![]() | Maxim Integrated Products | IC TXRX RS485/422 2.5MBPS 8SOIC RoHS : Compliant |
| 10,000 | ||
MAX3486EESA+![]() | Maxim Integrated Products | IC TXRX RS485/422 2.5MBPS 8SOIC RoHS : Compliant |
| 7,500 | ||
MAX3486EESA-T![]() | Maxim Integrated Products | IC TXRX RS485/422 2.5MBPS 8SOIC RoHS : Not Compliant |
| 6,850 | ||
MAX3486EESA+T![]() | Maxim Integrated Products | Single Transmitter/Receiver RS-422/RS-485 8-Pin SOIC N T/R / IC TXRX RS485/422 2.5MBPS 8SOIC RoHS : Compliant |
| 6,850 | ||
MAX3486ESA-T![]() | Maxim Integrated Products | RoHS : Not Compliant |
| 5,000 | ||
MAX3486ESA+T![]() | Maxim Integrated Products | IC TXRX RS485/422 2.5MBPS 8SOIC RoHS : Compliant |
| 5,000 | ||
MAX3486ESA![]() | Maxim Integrated Products | 3.3V-Powered, 10Mbps and Slew-Rate-Limited True RS-485/RS-422 Transceivers | IC TXRX RS485/422 2.5MBPS 8SOIC RoHS : Not Compliant |
| 3,016 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |