 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
372HI3JB-T Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 Rochester Electronics | MAX4372HEBT+ | Analog Devices Inc | Low-Cost, UCSP/SOT23, Micropower, High-S RoHS : Compliant |
| 842 | |
| LTC3372HUK#PBF | Analog Devices Inc | Switching Controller, Current-mode, 2.2A, 2250kHz Switching Freq-Max, CMOS, PQCC48 RoHS : Compliant |
| 4 | ||
| MAX4372HEBT+T | Analog Devices Inc | Current Sense Amplifier Single-Ended 110kHz 5-BGA T/R RoHS : Compliant |
| 25,000 | ||
| LT1372HVCS8#PBF | Analog Devices Inc | IC VOLT REG Adjustable Step-Up, Step-Down, Step-Up/Step-Down Boost, Buck, Cuk, Flyback, Forward Converter, SEPIC 1 OUT 1.245V - 42V (Switch) 1.5A (Switch) 8-SOIC Tube RoHS : Compliant |
| 27 | ||
| LT1372HVIS8#PBF | Analog Devices Inc | IC VOLT REG Adjustable Step-Up, Step-Down, Step-Up/Step-Down Boost, Buck, Cuk, Flyback, Forward Converter, SEPIC 1 OUT 1.245V - 42V (Switch) 1.5A (Switch) 8-SOIC Tube RoHS : Compliant |
| 17 | ||
LT1372HVIS8 | Linear Technology | Switching Regulator, Current-mode, 2.7A, 580kHz Switching Freq-Max, BIPolar, PDSO8 RoHS : Not Compliant |
| 715 | ||
MAX4372HEBT | Maxim Integrated Products | Operational Amplifier RoHS : Not Compliant |
| 1,421 | ||
MAX4372HEBT+T | Maxim Integrated Products | Current Sense Amplifier Single-Ended 110kHz 5-BGA T/R RoHS : Compliant |
| 801,863 | ||
| MAX4372HEUK | Maxim Integrated Products | Current Sense Amplifier Single-Ended 110kHz SOT-23-5 T/R RoHS : Not Compliant |
| 3,822 | ||
MAX4372HEUK-T | Maxim Integrated Products | Current Sense Amplifier Single-Ended 110kHz SOT-23-5 T/R RoHS : Not Compliant |
| 17,390 | ||
 Sager | MM1-X-00-923-7-2HA-B-C | Carling Technologies | Circuit Breakers | 0 | ||
 TME | 67997-372HLF | Amphenol Corporation | Connector: pin strips; pin header; male; data; PIN: 72; soldering |
| 16 | |
| NFG0QHB372HS2D | Murata Manufacturing Co Ltd | Filter: anti-interference; 9Ω; SMD; 12.5VDC; 100mA; 025020; 100MHz RoHS : Compliant |
| 0 | ||
 Ameya Holding Limited | BD8372HFP-MTR | ROHM Semiconductor | 车载用 50V 200mA 1ch LED源极驱动器 RoHS : Compliant |
| 200 | |
 ComSIT USA | LT1372HVIS8 | Linear Technology | 500KHZ HIGH EFFICIENCY 1.5A SWITCHING REGULATOR Switching Regulator, Current-mode, 2.7A, 580kHz Switching Freq-Max, PDSO8 RoHS : Not Compliant | 259 | ||
 Interstate Connecting Components | 67997-372HLF | Amphenol FCi | B/S II DR RoHS : Compliant |
| 0 | |
 Powell Electronics | 372HX | Hammond Manufacturing | MULTI-TAP PRI, 191VA, 50/60HZ RoHS : Compliant |
| 11 | |
| 67997-372HLF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 11 | ||
| 372HXP | Hammond Manufacturing | MULTI-TAP PRI, 191VA, 50/60HZ RoHS : Compliant |
| 1 | ||
 Richardson RFPD | 118372-HMC706LC3C | Analog Devices Inc | HMC706LC3C Up-Down Converter and Mixer Evaluation RoHS : Compliant | 0 | ||
| LT1372HVIS8#TRPBF | Analog Devices Inc | Conv DC-DC 2.7V to 30V Non-Inv/Inv/Step Up/Step Do RoHS : Compliant |
| 0 | ||
| LT6372HMSE-0.2#TRPBF | Analog Devices Inc | INST Amp Single 35V Medical 16-Pin MSOP EP T/R RoHS : Compliant |
| 0 | ||
| LT6372HUDC-1#TRPBF | Analog Devices Inc | INST Amp Single 35V 20-Pin QFN EP T/R RoHS : Compliant |
| 0 | ||
| LT6372HMSE-1#PBF | Analog Devices Inc | INST Amp Single 35V 16-Pin MSOP EP Tube RoHS : Compliant |
| 0 | ||
| LT6372HMSE-0.2#PBF | Analog Devices Inc | INST Amp Single 35V Medical 16-Pin MSOP EP Tube RoHS : Compliant |
| 0 | ||
| LTC2372HUH-18#PBF | Analog Devices Inc | 8-Channel Single ADC SAR 500ksps 18-bit Serial 32- RoHS : Compliant |
| 0 | ||
| LTC2372HUH-16#PBF | Analog Devices Inc | 8-Channel Single ADC SAR 500ksps 16-bit Serial 32- RoHS : Compliant |
| 0 | ||
| LTC3372HUK#PBF | Analog Devices Inc | DC/DC Cntrlr Quint-OUT Step Down 2A/2A/20A 2100kHz RoHS : Compliant |
| 0 | ||
| LTC4372HMS8#TRPBF | Analog Devices Inc | OR Controller N-Channel Single Automotive 8-Pin MS RoHS : Compliant |
| 0 | ||
| LTC4372HDD#PBF | Analog Devices Inc | ORController N-Channel Single 8-Pin DFN EP Tube RoHS : Compliant |
| 0 | ||
| LT6372HUDC-1#PBF | Analog Devices Inc | INST Amp Single 35V 20-Pin QFN EP Tube RoHS : Compliant |
| 0 | ||
| LT1372HVCS8#PBF | Analog Devices Inc | Conv DC-DC 2.7V to 30V Non-Inv/Inv/Step Up/Step Do RoHS : Compliant |
| 0 | ||
| LTC3372HUK#TRPBF | Analog Devices Inc | DC/DC Cntrlr Quint-OUT Step Down 2A/2A/20A 2100kHz RoHS : Compliant |
| 0 | ||
| LTC4372HMS8#PBF | Analog Devices Inc | OR Controller N-Channel Single 8-Pin MSOP Tube RoHS : Compliant |
| 0 | ||
 Avnet Abacus | 67997-372HLF | Amphenol Corporation | Conn Unshrouded Header HDR 72 POS 254mm Solder ST ThruHole Poly Bag (Alt: 67997-372HLF) RoHS : Compliant | 0 | ||
| NFG0QHB372HS2D | Murata Manufacturing Co Ltd | Choke Common Mode 9 ohm 100 mA 0202 0605 Metric (Alt: NFG0QHB372HS2D) RoHS : Compliant | 0 | |||
| NFP0QHB372HS2D | Murata Manufacturing Co Ltd | Choke Common Mode 100 mA 065mm x 05mm x 03mm (Alt: NFP0QHB372HS2D) RoHS : Compliant | 0 | |||
 Avnet Asia | NFG0QHB372HS2D | Murata Manufacturing Co Ltd | (Alt: NFG0QHB372HS2D) RoHS : Compliant | 0 | ||
 Avnet Silica | CA16372_HB-SQ-WWW | LEDIL | (Alt: CA16372_HB-SQ-WWW) RoHS : Compliant | 0 | ||
| XC6218P372H-EVB-0001 | Torex Semiconductor LTD | 200mA Low Power Consumption LDO Regulators Evaluation Board (Alt: XC6218P372H-EVB-0001) RoHS : Compliant | 0 | |||
 Component Electronics, Inc | MAX4372HEUK-T | Maxim Integrated Products | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 20 | |
| MAX4372HESA+ | Maxim Integrated Products | IN STOCK SHIP TODAY RoHS : Compliant |
| 7 | ||
 EBV Elektronik | CA16372_HB-SQ-WWW | LEDIL | (Alt: CA16372_HB-SQ-WWW) RoHS : Compliant | 0 | ||
 Pasternack Enterprises US | PE3372/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm. BNC Female Bulkhead to BNC Female Bulkhead Cable Using RG188 Coax with HeatShrink., Radio frequency assembly BNC female bulkhead to BNC female bulkhead cable using RG188 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female bulkhead to BNC female bulkhead cable using RG188 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC bulkhead cable connection on one end and a BNC bulkhead cable connection on the other. Our BNC to BNC cable assembly has a female gender on end 1 and a female on end 2. PE3372/HS can also be known as a BNC jack to BNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3372/HS RF cable has a PTFE jacket of 0.110-inch diameter. The flexible RF cable has an in-series connection. Our bulkhead BNC female to bulkhead BNC female cable has a maximum VSWR of 1.4:1. BNC jack to BNC jack cable assembly PE3372/HS is built with RG188 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. BNC jack bulkhead to BNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC RF cable assembly as per your requirements. | 1,060 | ||
| PE3372/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. BNC Female Bulkhead to BNC Female Bulkhead Cable 24 Inch Length Using RG188 Coax with HeatShrink., Radio frequency assembly BNC female bulkhead to BNC female bulkhead cable 24 inch length using RG188 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female bulkhead to BNC female bulkhead cable 24 inch length using RG188 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC bulkhead cable connection on one end and a BNC bulkhead cable connection on the other. Our BNC to BNC cable assembly has a female gender on end 1 and a female on end 2. PE3372/HS-24 can also be known as a BNC jack to BNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3372/HS-24 RF cable has a PTFE jacket of 0.110-inch diameter. The flexible RF cable has an in-series connection. Our bulkhead BNC female to bulkhead BNC female cable has a maximum VSWR of 1.4:1. BNC jack to BNC jack cable assembly PE3372/HS-24 is built with RG188 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. BNC jack bulkhead to BNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC RF cable assembly as per your requirements. |
| 212 | ||
| PE3372/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. BNC Female Bulkhead to BNC Female Bulkhead Cable 36 Inch Length Using RG188 Coax with HeatShrink., Radio frequency assembly BNC female bulkhead to BNC female bulkhead cable 36 inch length using RG188 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female bulkhead to BNC female bulkhead cable 36 inch length using RG188 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC bulkhead cable connection on one end and a BNC bulkhead cable connection on the other. Our BNC to BNC cable assembly has a female gender on end 1 and a female on end 2. PE3372/HS-36 can also be known as a BNC jack to BNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3372/HS-36 RF cable has a PTFE jacket of 0.110-inch diameter. The flexible RF cable has an in-series connection. Our bulkhead BNC female to bulkhead BNC female cable has a maximum VSWR of 1.4:1. BNC jack to BNC jack cable assembly PE3372/HS-36 is built with RG188 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. BNC jack bulkhead to BNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC RF cable assembly as per your requirements. |
| 212 | ||
| PE3372/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. BNC Female Bulkhead to BNC Female Bulkhead Cable 48 Inch Length Using RG188 Coax with HeatShrink., Radio frequency assembly BNC female bulkhead to BNC female bulkhead cable 48 inch length using RG188 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female bulkhead to BNC female bulkhead cable 48 inch length using RG188 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC bulkhead cable connection on one end and a BNC bulkhead cable connection on the other. Our BNC to BNC cable assembly has a female gender on end 1 and a female on end 2. PE3372/HS-48 can also be known as a BNC jack to BNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3372/HS-48 RF cable has a PTFE jacket of 0.110-inch diameter. The flexible RF cable has an in-series connection. Our bulkhead BNC female to bulkhead BNC female cable has a maximum VSWR of 1.4:1. BNC jack to BNC jack cable assembly PE3372/HS-48 is built with RG188 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. BNC jack bulkhead to BNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC RF cable assembly as per your requirements. |
| 212 | ||
| PE3372/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. BNC Female Bulkhead to BNC Female Bulkhead Cable 12 Inch Length Using RG188 Coax with HeatShrink., Radio frequency assembly BNC female bulkhead to BNC female bulkhead cable 12 inch length using RG188 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female bulkhead to BNC female bulkhead cable 12 inch length using RG188 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC bulkhead cable connection on one end and a BNC bulkhead cable connection on the other. Our BNC to BNC cable assembly has a female gender on end 1 and a female on end 2. PE3372/HS-12 can also be known as a BNC jack to BNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3372/HS-12 RF cable has a PTFE jacket of 0.110-inch diameter. The flexible RF cable has an in-series connection. Our bulkhead BNC female to bulkhead BNC female cable has a maximum VSWR of 1.4:1. BNC jack to BNC jack cable assembly PE3372/HS-12 is built with RG188 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. BNC jack bulkhead to BNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC RF cable assembly as per your requirements. |
| 212 | ||
| PE3C3372/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to N Male Cable Using LMR-600 Coax with HeatShrink. PE3C3372/HS is a 7/16 DIN male to N male cable using LMR-600 coax. This Pasternack 7/16 DIN male to N male cable assembly uses a 50 Ohm 7/16 DIN for connector 1 and a 50 Ohm N for connector 2. Our male 7/16 DIN to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C3372/HS 7/16 DIN male to N male cable assembly is constructed with LMR-600 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W15372/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Cable Using LMR-400-UF Coax with HeatShrink. PE3W15372/HS is a SMA male to SMA male cable using LMR-400-UF coax. This Pasternack SMA male to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W15372/HS SMA male to SMA male cable assembly is constructed with LMR-400-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W13372/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Male Right Angle to BNC Female Cable Using LMR-195-UF Coax with HeatShrink. PE3W13372/HS is a reverse polarity TNC male right angle to BNC female cable using LMR-195-UF coax. This Pasternack reverse polarity TNC male right angle to BNC female cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm BNC for connector 2. TNC right angle to BNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our reverse polarity male TNC right angle to female BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13372/HS TNC reverse polarity male right angle to BNC female cable assembly is constructed with LMR-195-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C9372/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, RF Cable Part Number: PE-SR402AL-STRAIGHT. SMA Male to Straight Cut Lead Cable Using PE-SR402AL Coax with HeatShrink. PE3C9372/HS is a SMA male to cable using coax. This Pasternack SMA male to cable assembly uses a 50 Ohm SMA for connector 1 and a for connector 2. Our male SMA to cable assembly uses a cable type that is. Pasternack PE3C9372/HS SMA male to cable assembly is constructed with coax. | 0 | |||
| PE3C5372/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SSMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SSMB Plug to SSMB Plug Cable Using LMR-100 Coax with HeatShrink. PE3C5372/HS is a SSMB plug to SSMB plug cable using LMR-100A coax. This Pasternack SSMB plug to SSMB plug cable assembly uses a 50 Ohm SSMB for connector 1 and a 50 Ohm SSMB for connector 2. Our plug SSMB to plug SSMB cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C5372/HS SSMB plug to SSMB plug cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W17372/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-FR, RF Cable Type: LMR-100A-FR, RF Cable Impedance: 50 Ohm. SMA Male to SMA Female Bulkhead Cable Using LMR-100-FR Coax with HeatShrink. PE3W17372/HS is a SMA male to SMA female bulkhead cable using LMR-100A-FR coax. This Pasternack SMA male to SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17372/HS SMA male to SMA female bulkhead cable assembly is constructed with LMR-100A-FR coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C0372/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. SMB Plug Right Angle to MMCX Plug Right Angle Cable Using RG316 Coax with HeatShrink. PE3C0372/HS is a SMB plug right angle to MMCX plug right angle cable using RG316 coax. This Pasternack SMB plug right angle to MMCX plug right angle cable assembly uses a 50 Ohm SMB for connector 1 and a 50 Ohm MMCX for connector 2. SMB right angle to MMCX right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug SMB right angle to plug MMCX right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C0372/HS SMB plug right angle to MMCX plug right angle cable assembly is constructed with RG316 coax. | 0 | |||
| PE3W03372/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-FR, RF Cable Type: LMR-195-FR, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to TNC Female Bulkhead Cable Using LMR-195-FR Coax with HeatShrink. PE3W03372/HS is a TNC male right angle to TNC female bulkhead cable using LMR-195-FR coax. This Pasternack TNC male right angle to TNC female bulkhead cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. TNC right angle to TNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male TNC right angle to female TNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03372/HS TNC male right angle to TNC female bulkhead cable assembly is constructed with LMR-195-FR coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W22372/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. SMA Female Right Angle Bulkhead to MMCX Plug Right Angle Cable Using RG178 Coax with HeatShrink. PE3W22372/HS is a SMA female right angle bulkhead to MMCX plug right angle cable using RG178 coax. This Pasternack SMA female right angle bulkhead to MMCX plug right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm MMCX for connector 2. SMA right angle to MMCX right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMA right angle bulkhead to plug MMCX right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W22372/HS SMA female right angle bulkhead to MMCX plug right angle cable assembly is constructed with RG178 coax. | 0 | |||
| PE3W06372/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: Mini SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm. 75 Ohm Mini SMB Plug to 75 Ohm N Male Cable Using 75 Ohm RG187 Coax with HeatShrink. PE3W06372/HS is a Mini SMB plug to N male cable using RG187 coax. This Pasternack Mini SMB plug to N male cable assembly uses a 75 Ohm Mini SMB for connector 1 and a 75 Ohm N for connector 2. Our plug Mini SMB to male N cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE3W06372/HS Mini SMB plug to N male cable assembly is constructed with RG187 coax. | 0 | |||
 Vyrian | MAX4372HESA | Maxim Integrated Products | Power Supply Support Circuit, Fixed, 1 Channel, BICMOS, PDSO8 RoHS : Not Compliant | 12,684 | ||
| LT6372HUDC-1#TRPBF | Analog Devices Inc | Instrumentation Amplifier RoHS : Compliant | 12,202 | |||
| LT6372HMSE-0.2#TRPBF | Analog Devices Inc | Instrumentation Amplifier RoHS : Compliant | 10,958 | |||
| LT6372HUDC-1-PBF | Analog Devices Inc | 10,865 | ||||
| LT6372HUDC-0-2-TRPBF | Analog Devices Inc | 10,242 | ||||
| LT6372HMSE-0-2-PBF | Analog Devices Inc | 10,127 | ||||
| 118372-HMC706LC3C | Analog Devices Inc | 9,297 | ||||
| MAX4372HEUK-TG40 | Analog Devices (Maxim Integrated) | 9,295 | ||||
| LT1372HVIS8#TRPBF | Analog Devices Inc | Switching Regulator, Current-mode, 2.7A, 580kHz Switching Freq-Max, PDSO8 RoHS : Compliant | 8,363 | |||
| LT6372HMSE-1#PBF | Analog Devices Inc | Instrumentation Amplifier RoHS : Compliant | 7,665 | |||
| LTC2372HUH-16 | Analog Devices Inc | 6,987 | ||||
| LT6372HUDC-1-TRPBF | Analog Devices Inc | 6,247 | ||||
| LTC4372HDD-TRPBF | Analog Devices Inc | 6,161 | ||||
| MAX4372HEUK-G077 | Analog Devices (Maxim Integrated) | 5,620 | ||||
MAX4372HEBT+ | Maxim Integrated Products | Power Supply Support Circuit, Fixed, 1 Channel, BICMOS, PBGA6 RoHS : Compliant | 620 | |||
 Win Source Electronics | NFG0QHB372HS2D | Murata Manufacturing Co Ltd | CMC 100MA 2LN 9 OHM SMD / 2 Line Common Mode Choke Surface Mount 9 Ohms @ 100 MHz 100mA DCR 2.375Ohm RoHS : Compliant |
| 150,000 | |
| MAX4372HEUK | Maxim Integrated Products | IC OPAMP CUR SENS 110KHZ SOT23-5 RoHS : Not Compliant |
| 45,778 | ||
| MAX4372HEUK+T | Maxim Integrated Products | SP Amp Current Sense Amp Single 28V 5-Pin SOT-23 T/R / IC OPAMP CUR SENS 110KHZ SOT23-5 RoHS : Compliant |
| 43,380 | ||
| MAX4372HEUK-T | Maxim Integrated Products | IC OPAMP CUR SENS 110KHZ SOT23-5 RoHS : Not Compliant |
| 43,380 | ||
| LTC4372HDD#PBF | Analog Devices Inc | LOW ICC IDEAL DIODE CONTROLLER W / OR Controller N+1 ORing Controller N-Channel 1:1 8-DFN (3x3) RoHS : Compliant |
| 2,380 | ||
| LTC4372HDD#TRPBF | Analog Devices Inc | LOW ICC IDEAL DIODE CONTROLLER W / OR Controller N+1 ORing Controller N-Channel 1:1 8-DFN (3x3) RoHS : Compliant |
| 2,370 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼ 
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand