| Electronic Components Datasheet Search |
|
4053L-S16-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Flip Electronics | NLV14053BDR2G | onsemi | Stock, Ship Today RoHS : Compliant |
| 40,000 | |
MC74LVX4053DG![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 30,672 | ||
| ISL54053IHZ-T | Renesas Electronics Corporation | Stock, Ship Today RoHS : Compliant |
| 27,000 | ||
| NLVHC4053ADWR2G | onsemi | Stock, Ship Today RoHS : Compliant |
| 22,000 | ||
MC74HC4053ADWG![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 12,408 | ||
| NLVHC4053ADTR2G | onsemi | Stock RoHS : Compliant | 11,997 | |||
| NX3L4053HRZ | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 7,500 | ||
MC74LVXT4053DR2G![]() | onsemi | Stock, Ship Today RoHS : Compliant | 5,000 | |||
| NLV14053BDTR2G | onsemi | Stock, Ship Today RoHS : Compliant |
| 5,000 | ||
NLAS4053DR2G![]() | onsemi | Stock RoHS : Compliant | 3,080 | |||
MC74HC4053ADG![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 3,024 | ||
MC14053BDR2G![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 2,500 | ||
| 74LV4053ATELL-E | Renesas Electronics Corporation | Stock | 2,000 | |||
MC74HC4053ADTG![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 1,491 | ||
![]() Maritex | MC14053BDR2G![]() | onsemi | Other Interface ICs; MC14053BDR2G; ON SEMICONDUCTOR; 16; 3 V; 18 V; 1.4986 mm RoHS : Compliant |
| 4,904 | |
| 74HC4053D | Nexperia | Analog Switches/Multiplexers; 74HC4053D; NEXPERIA; 16; 6 V; 2 V; 1 RoHS : Compliant |
| 2,501 | ||
SN74LV4053APWR![]() | Texas Instruments | Other Interface ICs; SN74LV4053APWR; TEXAS INSTRUMENTS; 16; 5.5 V; 2 V; TSSOP RoHS : Compliant |
| 1,861 | ||
74HC4053D,653![]() | Nexperia | Analog Switches/Multiplexers; 74HC4053D,653; NEXPERIA; 16 RoHS : Compliant |
| 1,121 | ||
| 174053-2 | TE Connectivity | Male Pin Headers; 174053-2; TE CONNECTIVITY; 2; Tin; 16; 16 RoHS : Compliant |
| 661 | ||
| 74HC4053D | Texas Instruments | Logic IC Analog Multiplexer/Demultiplexer; CH:2; IN:3; CMOS 74HC; 2-6V; -55+125 deg.C; SMD; SO16 |
| 489 | ||
4053G-S16-R![]() | Unisonic Technologies Co Ltd | Analog Switches/Multiplexers; 4053G-S16-R; UTC RoHS : Compliant |
| 100 | ||
| 96.032.4053.1 | Wieland Electric GmbH | RST20I3S S1 ZR1 V SW connector; 3-pin; plug; screw connection; male; black; 20 A; cable diameter 6–10mm; 20A/250V |
| 50 | ||
SN74LV4053APWT![]() | Texas Instruments | Other Interface ICs; SN74LV4053APWT; TEXAS INSTRUMENTS; 16; 5.5 V; 2 V; TSSOP RoHS : Compliant |
| 49 | ||
CD4053BM96![]() | Texas Instruments | Other Interface ICs; CD4053BM96; TEXAS INSTRUMENTS; 16; 20 V; 3 V; SOIC RoHS : Compliant |
| 1 | ||
CD4053BPWR![]() | Texas Instruments | Other Interface ICs; CD4053BPWR; TEXAS INSTRUMENTS; 16; 20 V; 3 V; TSSOP RoHS : Compliant |
| 1 | ||
![]() Pasternack Enterprises US | PE3405-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG62A/U, RF Cable Type: RG62, RF Cable Impedance: 93 Ohm, Length: 36 inches. SMA Male to SMA Female Cable 36 Inch Length Using 93 Ohm RG62 Coax., Radio frequency assembly SMA male to SMA female cable 36 inch length using 93 Ohm RG62 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA female cable 36 inch length using 93 Ohm RG62 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE3405-36, can also be known as a SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3405-36 is built with RG62 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3405-36 can also be used in the other direction and will be SMA female to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female cable 36 inch length using 93 Ohm RG62 coax. |
| 98 | |
| PE33405-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: PE-B150, RF Cable Type: PE-B150, RF Cable Impedance: 75 Ohm, Length: 36 inches. 75 Ohm BNC Male to 75 Ohm BNC Male Cable 36 Inch Length Using 75 Ohm PE-B150 Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male cable 36 inch length using 75 Ohm PE-B150 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm BNC male to 75 Ohm BNC male cable 36 inch length using 75 Ohm PE-B150 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE33405-36, can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE33405-36 is built with PE-B150 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male cable 36 inch length using 75 Ohm PE-B150 coax. |
| 87 | ||
| PE3FCA405-30M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM1, Fiber Diameter: 62.5/125, Cable Assembly Color: Orange, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: ST, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 6.2 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 12-Fiber LC UPC to ST UPC, OM1 Multimode Distribution Cable, 6.2mm LSZH, 2.0mm breakout, Orange-30M. Pasternack’s PE3FCA405-30M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 30-meter long 12-fiber cable assembly is equipped with LC/UPC to ST/UPC connectors. Our orange fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM1 fiber that provides 100 Mb Ethernet support and 10 Gb Ethernet up to 33 meters with a 62.5/125µm core size and an LED light source. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 12-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA405-30M fiber optic cable with a 6.2 mm cable diameter and 62 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/UPC to ST/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Our fiber optic breakout assembly is engineered for low attenuation and high durability, and the tight buffered fiber with aramid yarn reinforcement ensures exceptional performance in demanding network environments. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM1 multimode fiber optic cable that meets your requirements. |
| 23 | ||
| PE15A4053F | Pasternack Enterprises | Key Specifications, Frequency, Min: 500 MHz, Frequency, Max: 4 GHz, Gain, Min: 30 dB, 1dB Compression Point, Min: 30 dBm, Voltage, DC Typ: 12 Volts. 1 Watt P1dB, 500 MHz to 4 GHz, Medium Power Amplifier with Heatsink, SMA, 30 dB Gain, 6 dB NF. RF solid state power amplifier (SSPA) PE15A4053F from Pasternack is part of the largest selection of in-stock radio frequency microwave and millimeter wave amplifiers available for same-day shipment. This Pasternack solid state RF power amplifier is a medium power amp design constructed in a connectorized package. Our SSPA is designed with SMA connectors and rated at 1 Watt. Pasternack solid state power amplifier part number PE15A4053F SMA medium power amp has a 30 dB minimum gain. The medium power medium gain amp is rated with a P1dB of 30 dBm. Our radio frequency medium power solid state amplifier is constructed for minimum frequency of 500 MHz and a maximum frequency of 4 GHz. Additional radio frequency specs on this high frequency medium gain medium power solid state power amplifier from Pasternack can be found in the details on the RF power amplifier datasheet specifications PDF above. Our medium power medium gain HF amplifier is part of over one 40,000 RF, microwave and millimeter wave components in-stock. This medium power 1 Watt radio frequency amplifier is ready for same day purchase and shipping worldwide. Pasternack also stocks a wide range of other radio signal SSPAs that ship same-day from our facility for all your RF, microwave and millimeter wave amplifier component needs. |
| 7 | ||
| PE15A4053 | Pasternack Enterprises | Key Specifications, Frequency, Min: 500 MHz, Frequency, Max: 4 GHz, Gain, Min: 30 dB, 1dB Compression Point, Min: 30 dBm, Voltage, DC Typ: 12 Volts. 1 Watt P1dB, 500 MHz to 4 GHz, Medium Power Amplifier, SMA, 30 dB Gain, 6 dB NF. RF solid state power amplifier (SSPA) PE15A4053 from Pasternack is part of the largest selection of in-stock radio frequency microwave and millimeter wave amplifiers available for same-day shipment. This Pasternack solid state RF power amplifier is a medium power amp design constructed in a connectorized package. Our SSPA is designed with SMA connectors and rated at 1 Watt. Pasternack solid state power amplifier part number PE15A4053 SMA medium power amp has a 30 dB minimum gain. The medium power medium gain amp is rated with a P1dB of 30 dBm. Our radio frequency medium power solid state amplifier is constructed for minimum frequency of 500 MHz and a maximum frequency of 4 GHz. Additional radio frequency specs on this high frequency medium gain medium power solid state power amplifier from Pasternack can be found in the details on the RF power amplifier datasheet specifications PDF above. Our medium power medium gain HF amplifier is part of over one 40,000 RF, microwave and millimeter wave components in-stock. This medium power 1 Watt radio frequency amplifier is ready for same day purchase and shipping worldwide. Pasternack also stocks a wide range of other radio signal SSPAs that ship same-day from our facility for all your RF, microwave and millimeter wave amplifier component needs. |
| 5 | ||
| PE3W04053 | Pasternack Enterprises | Key Specifications, Connector Series 1: C, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: C, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C195, RF Cable Type: PE-C195, RF Cable Impedance: 50 Ohm. C Male to C Male Right Angle Cable Using PE-C195 Coax. PE3W04053 is a C male to C male right angle cable using PE-C195 coax. This Pasternack C male to C male right angle cable assembly uses a 50 Ohm C for connector 1 and a 50 Ohm C for connector 2. C to C right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male C to male C right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04053 C male to C male right angle cable assembly is constructed with PE-C195 coax. | 0 | |||
| PE3C4053/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: MMBX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. Snap-On MMBX Plug Right Angle to SMA Male Cable Using RG316-DS Coax with HeatShrink. PE3C4053/HS is a MMBX plug right angle to SMA male cable using RG316-DS coax. This Pasternack MMBX plug right angle to SMA male cable assembly uses a 50 Ohm MMBX for connector 1 and a 50 Ohm SMA for connector 2. MMBX right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MMBX right angle to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C4053/HS MMBX plug right angle to SMA male cable assembly is constructed with RG316-DS coax. | 0 | |||
| PE3MSA00405-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: TWCH-78-2, RF Cable Type: TWCH-78-2, RF Cable Impedance: 78 Ohm, Length, Max: 36 inches. Halogen Free Bend Relief 3-Lug TRB Bulkhead Insulated Jack with Blunt Cut for 78 Ohm TWCH-78-2, 36" Cable., Radio frequency assembly halogen free bend relief 3-Lug TRB bulkhead insulated jack with blunt cut for 78 Ohm TWCH-78-2, 36" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Halogen free bend relief 3-Lug TRB bulkhead insulated jack with blunt cut for 78 Ohm TWCH-78-2, 36" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB bulkhead cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a jack gender on end 1 and genderless on end 2. PE3MSA00405-36 can also be known as a 1553 TRB female to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB female to blunt cut genderless cable assembly PE3MSA00405-36 is built with TWCH-78-2 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB jack bulkhead to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MSA00405-36 can also be used in the other direction and will be blunt cut genderless to TRB jack bulkhead cable assembly if the opposite connectivity is required. 1553 TRB female bulkhead to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this halogen free bend relief 3-Lug TRB bulkhead insulated jack with blunt cut for 78 Ohm TWCH-78-2, 36" cable. |
| 0 | ||
| PE3W24053 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-FR, RF Cable Type: LMR-240-FR, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to 4.3-10 Male Cable Using LMR-240-FR Coax. PE3W24053 is a TNC male right angle to 4.3-10 male cable using LMR-240-FR coax. This Pasternack TNC male right angle to 4.3-10 male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm 4.3-10 for connector 2. TNC right angle to 4.3-10 coaxial cable assembly uses 90 degree right angle coax cable connector. Our male TNC right angle to male 4.3-10 cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W24053 TNC male right angle to 4.3-10 male cable assembly is constructed with LMR-240-FR coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C4053-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: MMBX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length: 24 inches. Snap-On MMBX Plug Right Angle to SMA Male Cable 24 Inch Length Using RG316-DS Coax., Radio frequency assembly snap-on MMBX plug right angle to SMA male cable 24 inch length using RG316-DS coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Snap-on MMBX plug right angle to SMA male cable 24 inch length using RG316-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMBX to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle MMBX cable connection on one end and SMA cable connection on the other. Our right angle MMBX to SMA cable assemblies have a plug gender on end 1 and male on end 2. This MMBX to SMA cable is a plug to male coax assembly, PE3C4053-24, can also be known as a right angle MMBX male to SMA plug cable assembly and will be shipped same-day as it is purchased. MMBX male to SMA plug cable assembly PE3C4053-24 is built with RG316-DS which is a flexible coax type. The Pasternack flexible MMBX cable assembly is manufactured with right angle MMBX to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency MMBX right angle plug to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4053-24 can also be used in the other direction and will be SMA male to right angle MMBX plug cable assembly if the opposite connectivity is required. MMBX right angle male to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMBX to SMA cable assembly for quick shipment worldwide. Variations of MMBX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this snap-on MMBX plug right angle to SMA male cable 24 inch length using RG316-DS coax. |
| 0 | ||
| PE3C7405-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 2.4mm Male to SMA Female Cable 36 Inch Length Using PE-P086 Coax., Radio frequency assembly 2.4mm male to SMA female cable 36 inch length using PE-P086 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to SMA female cable 36 inch length using PE-P086 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.4mm cable connection on one end and SMA cable connection on the other. Our 2.4mm to SMA cable assemblies have a male gender on end 1 and female on end 2. PE3C7405-36 can also be known as a 2.4mm plug to SMA jack cable assembly and will be shipped same-day as it is purchased. 2.4mm plug to SMA jack cable assembly PE3C7405-36 is built with PE-P086 which is a flexible coax type. The Pasternack flexible 2.4mm cable assembly is manufactured with 2.4mm to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 18 GHz maximum frequency 2.4mm male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7405-36 can also be used in the other direction and will be SMA female to 2.4mm male cable assembly if the opposite connectivity is required. 2.4mm plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to SMA cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.4mm male to SMA female cable 36 inch length using PE-P086 coax. |
| 0 | ||
| PE3C4405-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMA Male to SSMC Plug Cable 36 Inch Length Using RG316 Coax., Radio frequency assembly SMA male to SSMC plug cable 36 inch length using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SSMC plug cable 36 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SSMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SSMC cable connection on the other. Our SMA to SSMC cable assemblies have a male gender on end 1 and plug on end 2. This SMA to SSMC cable is a male to plug coax assembly, PE3C4405-36, can also be known as a SMA plug to SSMC male cable assembly and will be shipped same-day as it is purchased. SMA plug to SSMC male cable assembly PE3C4405-36 is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SSMC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMA male to SSMC plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4405-36 can also be used in the other direction and will be SSMC plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to SSMC male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SSMC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SSMC plug cable 36 inch length using RG316 coax. |
| 0 | ||
| PE3C4053-4 | Pasternack Enterprises | Key Specifications, Connector Series 1: MMBX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length: 4 inches. Snap-On MMBX Plug Right Angle to SMA Male Cable 4 Inch Length Using RG316-DS Coax., Radio frequency assembly snap-on MMBX plug right angle to SMA male cable 4 inch length using RG316-DS coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Snap-on MMBX plug right angle to SMA male cable 4 inch length using RG316-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMBX to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle MMBX cable connection on one end and SMA cable connection on the other. Our right angle MMBX to SMA cable assemblies have a plug gender on end 1 and male on end 2. This MMBX to SMA cable is a plug to male coax assembly, PE3C4053-4, can also be known as a right angle MMBX male to SMA plug cable assembly and will be shipped same-day as it is purchased. MMBX male to SMA plug cable assembly PE3C4053-4 is built with RG316-DS which is a flexible coax type. The Pasternack flexible MMBX cable assembly is manufactured with right angle MMBX to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency MMBX right angle plug to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4053-4 can also be used in the other direction and will be SMA male to right angle MMBX plug cable assembly if the opposite connectivity is required. MMBX right angle male to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMBX to SMA cable assembly for quick shipment worldwide. Variations of MMBX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this snap-on MMBX plug right angle to SMA male cable 4 inch length using RG316-DS coax. |
| 0 | ||
| PE3C4053-6 | Pasternack Enterprises | Key Specifications, Connector Series 1: MMBX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length: 6 inches. Snap-On MMBX Plug Right Angle to SMA Male Cable 6 Inch Length Using RG316-DS Coax., Radio frequency assembly snap-on MMBX plug right angle to SMA male cable 6 inch length using RG316-DS coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Snap-on MMBX plug right angle to SMA male cable 6 inch length using RG316-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMBX to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle MMBX cable connection on one end and SMA cable connection on the other. Our right angle MMBX to SMA cable assemblies have a plug gender on end 1 and male on end 2. This MMBX to SMA cable is a plug to male coax assembly, PE3C4053-6, can also be known as a right angle MMBX male to SMA plug cable assembly and will be shipped same-day as it is purchased. MMBX male to SMA plug cable assembly PE3C4053-6 is built with RG316-DS which is a flexible coax type. The Pasternack flexible MMBX cable assembly is manufactured with right angle MMBX to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency MMBX right angle plug to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4053-6 can also be used in the other direction and will be SMA male to right angle MMBX plug cable assembly if the opposite connectivity is required. MMBX right angle male to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMBX to SMA cable assembly for quick shipment worldwide. Variations of MMBX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this snap-on MMBX plug right angle to SMA male cable 6 inch length using RG316-DS coax. |
| 0 | ||
| PE3C4053-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: MMBX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length: 18 inches. Snap-On MMBX Plug Right Angle to SMA Male Cable 18 Inch Length Using RG316-DS Coax., Radio frequency assembly snap-on MMBX plug right angle to SMA male cable 18 inch length using RG316-DS coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Snap-on MMBX plug right angle to SMA male cable 18 inch length using RG316-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMBX to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle MMBX cable connection on one end and SMA cable connection on the other. Our right angle MMBX to SMA cable assemblies have a plug gender on end 1 and male on end 2. This MMBX to SMA cable is a plug to male coax assembly, PE3C4053-18, can also be known as a right angle MMBX male to SMA plug cable assembly and will be shipped same-day as it is purchased. MMBX male to SMA plug cable assembly PE3C4053-18 is built with RG316-DS which is a flexible coax type. The Pasternack flexible MMBX cable assembly is manufactured with right angle MMBX to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency MMBX right angle plug to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4053-18 can also be used in the other direction and will be SMA male to right angle MMBX plug cable assembly if the opposite connectivity is required. MMBX right angle male to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMBX to SMA cable assembly for quick shipment worldwide. Variations of MMBX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this snap-on MMBX plug right angle to SMA male cable 18 inch length using RG316-DS coax. |
| 0 | ||
![]() Relay Specialties | 405-320-02-00 | atc Diversified Electronics | Timer Accessory Panel Mounting Bracket |
| 8 | |
![]() TE Connectivity | 2405396-2 | TE Connectivity | 2P TO 2P 300MM CABLE ASSEMBLY,1470364-2 Number of Positions: 2 Cable Assembly Length: .3 m Cable Assembly Length: .98 ft Cable Color: Orange Shielded: No High Speed I/o Cable Assembly | 2 .3 m .98 ft Orange | Part Number: 2405396-2 | Internal Number: 2405396-2 | TE Connectivity RoHS : Compliant |
| 1,496 | |
| 2405396-4 | TE Connectivity | 5P TO 5P 300MM CABLE ASSEMBLY,1470364-5 Number of Positions: 5 Cable Assembly Length: .3 m Cable Assembly Length: .98 ft Cable Color: Orange Shielded: No High Speed I/o Cable Assembly | 5 .3 m .98 ft Orange | Part Number: 2405396-4 | Internal Number: 2405396-4 | TE Connectivity RoHS : Compliant |
| 1,496 | ||
| 2405396-3 | TE Connectivity | 3P TO 3P 300MM CABLE ASSEMBLY,1470364-3 Number of Positions: 3 Cable Assembly Length: .3 m Cable Assembly Length: .98 ft Cable Color: Orange Shielded: No High Speed I/o Cable Assembly | 3 .3 m .98 ft Orange | Part Number: 2405396-3 | Internal Number: 2405396-3 | TE Connectivity RoHS : Compliant |
| 1,485 | ||
| 2405396-5 | TE Connectivity | 10P TO 10P 300MM CABLE ASS'Y,1-1470364-0 Number of Positions: 10 Cable Assembly Length: .3 m Cable Assembly Length: .98 ft Cable Color: Orange Shielded: No High Speed I/o Cable Assembly | 10 .3 m .98 ft Orange | Part Number: 2405396-5 | Internal Number: 2405396-5 | TE Connectivity RoHS : Compliant |
| 1,457 | ||
| 2405396-1 | TE Connectivity | 8P TO 8P 300MM CABLE ASSEMBLY,1470364-8 Number of Positions: 8 Cable Assembly Length: .3 m Cable Assembly Length: .98 ft Cable Color: Orange Shielded: No High Speed I/o Cable Assembly | 8 .3 m .98 ft Orange | Part Number: 2405396-1 | Internal Number: 2405396-1 | TE Connectivity RoHS : Compliant |
| 1,443 | ||
| 2174053-1 | TE Connectivity | ENC. CBL I/O KIT, M-MOTOR PLUS Number of Positions: 8 Connector & Housing Type: Receptacle Plug Connector Product Type: Connector Kit Mating Alignment: Without Mating Retention: With Standard Rectangular Connector | 8 Receptacle Connector Kit | Part Number: 2174053-1 | Internal Number: 2174053-1 | TE Connectivity RoHS : Compliant |
| 466 | ||
| 2405341-2 | TE Connectivity | BLIND PLUG BLOCK ASSAMBLY,TOOL UNLOCK. Connector Seal & Plug Type: Cavity Plug Cavity Diameter: 20.7 mm Cavity Diameter: .814 in Operating Temperature Range: -40 – 140 °C Operating Temperature Range: -40 – 284 °F Cavity Plug 20.7 mm | Connector Seal & Cavity Plug | Part Number: 2405341-2 | Internal Number: 2405341-2 | TE Connectivity RoHS : Compliant |
| 96 | ||
![]() Vyrian | M74HC4053B1R![]() | STMicroelectronics | Single-Ended Multiplexer, 3 Func, 2 Channel, CMOS, PDIP16 RoHS : Compliant | 12,841 | ||
MC14053BDTR2![]() | onsemi | Single-Ended Multiplexer, 3 Func, 2 Channel, CMOS, PDSO16 RoHS : Compliant | 12,225 | |||
NLAST4053DTR2G![]() | onsemi | Single-Ended Multiplexer, 3 Func, 2 Channel, CMOS, PDSO16 RoHS : Compliant | 10,268 | |||
| MAX4053EPE+ | Analog Devices Inc | SPDT, 3 Func, 1 Channel, CMOS, PDIP16 RoHS : Compliant | 9,608 | |||
MC14053BFELG![]() | onsemi | Single-Ended Multiplexer, 3 Func, 2 Channel, CMOS, PDSO16 RoHS : Compliant | 8,175 | |||
MAX4053ESE![]() | Maxim Integrated Products | SPDT, 3 Func, 1 Channel, CMOS, PDSO16 RoHS : Not Compliant | 7,767 | |||
| 8405301QX | Texas Instruments | Digital Signal Processor, 16-Bit Size, MOS, CDIP40 | 7,448 | |||
| AU1340-533MBDA2 | Broadcom Limited | 6,123 | ||||
CD74HCT4053PWTG4![]() | Texas Instruments | Single-Ended Multiplexer, 3 Func, 2 Channel, CMOS, PDSO16 RoHS : Compliant | 6,047 | |||
| HEF4053BT/S208 | Nexperia | Single-Ended Multiplexer | 5,285 | |||
| MT5C6405-35IT | Micron Technology Inc | Standard SRAM, 16KX4, 35ns, CMOS, PDIP24 RoHS : Not Compliant | 4,568 | |||
CD4053BH![]() | Texas Instruments | Bus Driver, 4000/14000/40000 Series, 6-Func, 1-Bit, True Output, CMOS | 4,491 | |||
MAX4053ACEE![]() | Maxim Integrated Products | SPDT, 3 Func, 1 Channel, CMOS, PDSO16 RoHS : Not Compliant | 4,038 | |||
74LV4053D,112![]() | Nexperia | Single-Ended Multiplexer, 3 Func, 2 Channel, CMOS, PDSO16 RoHS : Compliant | 3,127 | |||
| CD4053BCN | National Semiconductor Corporation | Single-Ended Multiplexer, 3 Func, 1 Channel, CMOS, PDIP16 RoHS : Not Compliant | 800 | |||
![]() Win Source Electronics | 74HC4053DR | Nexperia |
| 283,010 | ||
CD4053BPWRG4![]() | Texas Instruments | IC MUX/DEMUX TRIPLE 2X1 16TSSOP RoHS : Compliant |
| 126,960 | ||
SN74LV4053APW![]() | Texas Instruments | IC MUX/DEMUX TRIPLE 2X1 16TSSOP RoHS : Compliant |
| 98,000 | ||
CD4053BPW![]() | Texas Instruments | IC MUX/DEMUX TRIPLE 2X1 16TSSOP RoHS : Compliant |
| 88,200 | ||
| SFH4053 | OSRAM Opto Semiconductors | CHIPLED with High Power Infrared Emitter (850 nm) RoHS : Compliant |
| 66,464 | ||
TC74HC4053AFT![]() | Toshiba America Electronic Components | 8-CHANNEL ANALOG MULTIPLEXER/DEMULITIPLEXER RoHS : Compliant |
| 50,000 | ||
CD74HC4053M96![]() | Texas Instruments | IC MUX/DEMUX TRIPLE 2X1 16SOIC RoHS : Compliant |
| 40,810 | ||
SN74LV4053APWRG4![]() | Texas Instruments | IC MUX/DEMUX TRIPLE 2X1 16TSSOP RoHS : Compliant |
| 30,000 | ||
CD74HC4053PWT![]() | Texas Instruments | IC MUX/DEMUX TRIPLE 2X1 16TSSOP RoHS : Compliant |
| 18,950 | ||
CD74HCT4053PWRG4![]() | Texas Instruments | IC SWITCH SPDTX3 130OHM 16TSSOP RoHS : Compliant |
| 18,700 | ||
CD74HCT4053PWR![]() | Texas Instruments | IC MUX/DEMUX TRIPLE 2X1 16TSSOP RoHS : Compliant |
| 18,520 | ||
| 74LV4053D | Nexperia | Triple 2-channel analog multiplexer/demultiplexer RoHS : Compliant |
| 12,500 | ||
TC74HCT4053AFT![]() | Toshiba America Electronic Components | Triple 2-Channel Analog Multiplexer/Demultiplexer RoHS : Compliant |
| 6,000 | ||
MC74HC4053ADTR2G![]() | onsemi | IC MUX/DEMUX TRIPLE 2X1 16TSSOP RoHS : Compliant |
| 4,848 | ||
SN74LV4053AD![]() | Texas Instruments | IC MUX/DEMUX TRIPLE 2X1 16SOIC RoHS : Compliant |
| 400 | ||
![]() Wuhan P&S | MC74LVX4053DR2G![]() | onsemi | Analog Multiplexer/Demultiplexer RoHS : Compliant |
| 65,000 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |