| Electronic Components Datasheet Search |
|
4133-R2 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Coilcraft Direct | MSS7341-332NLD | Coilcraft Inc | Power inductor, shielded, 10/20/30% tol, SMT, RoHS RoHS : Compliant |
| 2,500 | |
| MSS7341-332NLC | Coilcraft Inc | Power inductor, shielded, 10/20/30% tol, SMT, RoHS RoHS : Compliant |
| 4 | ||
| MSS7341-332MLC | Coilcraft Inc | Power inductor, shielded, 20/30% tol, SMT, RoHS RoHS : Compliant | 0 | |||
| MSS7341-333MLD | Coilcraft Inc | Power inductor, shielded, 10/20/30% tol, SMT, RoHS RoHS : Compliant |
| 0 | ||
![]() Ameya Holding Limited | BQ24133RGYR![]() | Texas Instruments | IC BATT CHARGE LI-ION/POL 24VQFN RoHS : Compliant | 180 | ||
![]() NexGen Digital | 5-641337-3 | TE Connectivity | RoHS : Compliant | 50 | ||
![]() PEI Genesis | GSB3C413305H1EU | Amphenol Corporation |
| 0 | ||
![]() Chip 1 Exchange | 1394133-1 | TE Connectivity | INSTOCK RoHS : Compliant | 135,043 | ||
| 232273041333 | INSTOCK | 22,000 | ||||
| 111-4133PBF | International Rectifier | INSTOCK | 3,253 | |||
| MKP1841-3300PFK2KV | INSTOCK | 2,500 | ||||
| MKP18413300PF630V-+-5% | Vishay Intertechnologies | INSTOCK | 1,976 | |||
| 4041338000132 | Texas Instruments | INSTOCK | 1,500 | |||
| TGL41-33A | GS Battery | INSTOCK | 1,500 | |||
| HY59A884133103 E-YELLOW | INSTOCK | 290 | ||||
| TGL41-33A-E3/96 | Vishay Intertechnologies | INSTOCK RoHS : Compliant | 250 | |||
| 5-641337-2 | INSTOCK | 86 | ||||
| 22SMA-50-0-44/133NE | INSTOCK | 50 | ||||
| 61400413321- | Wurth Elektronik | INSTOCK | 50 | |||
| 1641330000- | Weidmüller Interface GmbH & Co. KG | INSTOCK | 46 | |||
| 1D49341-33 | INSTOCK | 2 | ||||
![]() Avnet Abacus | 441332000 | Molex | Conn Housing RCP 20 POS 3mm Crimp ST Tray (Alt: 441332000) RoHS : Compliant | 2,880 | ||
| 1841330000 | Weidmüller Interface GmbH & Co. KG | (Alt: 1841330000) RoHS : Compliant | 0 | |||
| 5-641335-7 | TE Connectivity | (Alt: 5-641335-7) RoHS : Compliant | 0 | |||
| 714133-000 | TE Connectivity | (Alt: 714133-000) RoHS : Compliant | 0 | |||
| 4-1333203-5 | TE Connectivity | (Alt: 4-1333203-5) RoHS : Not Compliant | 0 | |||
| 4-1333203-5 | TE Connectivity | (Alt: 4-1333203-5) RoHS : Not Compliant | 0 | |||
| 4-1333225-1 | TE Connectivity | ANVIL COMB (Alt: 4-1333225-1) RoHS : Not Compliant | 0 | |||
| 4-1333225-1 | TE Connectivity | ANVIL COMB (Alt: 4-1333225-1) RoHS : Not Compliant | 0 | |||
| 4-1333201-1 | TE Connectivity | (Alt: 4-1333201-1) RoHS : Not Compliant | 0 | |||
| 4-1333201-1 | TE Connectivity | (Alt: 4-1333201-1) RoHS : Not Compliant | 0 | |||
| 4-1333201-0 | TE Connectivity | ANVIL COMBINATION 055 (Alt: 4-1333201-0) RoHS : Compliant | 0 | |||
| CDC4.4133.151 | Schurter Electronic Components | Conn Filtered M 3 POS 250VAC 6A ST 1 Port (Alt: CDC4.4133.151) RoHS : Compliant | 0 | |||
| 768141334GPTR13 | CTS Corporation | Fixed Network Resistor 330 kohm Bussed 13 Resistors Gull Wing 2 50 V 150 mW 100ppmC - Tape and Reel (Alt: 768141334GPTR13) RoHS : Compliant | 0 | |||
| 768141330GPTR13 | CTS Corporation | Fixed Network Resistor 33 ohm Bussed 13 Resistors Gull Wing 2 50 V 150 mW 200ppmC - Tape and Reel (Alt: 768141330GPTR13) RoHS : Compliant | 0 | |||
| T4133512051-000 | TE Connectivity | (Alt: T4133512051-000) RoHS : Compliant | 0 | |||
![]() Avnet Silica | BZV85-C24,133![]() | Nexperia | Diode Zener Single 242V 5 13W 2Pin DO41 Ammo (Alt: BZV85-C24,133) RoHS : Compliant | 10,000 | ||
| AP7341-33FS4-7 | Diodes Incorporated | LDO Regulator Pos 33V 03A 4Pin DFN TR (Alt: AP7341-33FS4-7) RoHS : Compliant | 5,000 | |||
| AC164133 | Microchip Technology Inc | PICtail Plus Daughter Board with 2 Buck Converters 1 Boost Converter for SMPS Applications (Alt: AC164133) RoHS : Compliant | 0 | |||
| ISL41334IRZ | Renesas Electronics Corporation | (Alt: ISL41334IRZ) RoHS : Compliant | 0 | |||
BZX79-C24,133![]() | Nexperia | Diode Zener Single 242V 5 500mW 2Pin ALF Ammo (Alt: BZX79-C24,133) RoHS : Compliant | 0 | |||
| ISL41334IRZ-T | Renesas Electronics Corporation | (Alt: ISL41334IRZ-T) RoHS : Compliant | 0 | |||
BZX79-B24,133![]() | Nexperia | Diode Zener Single 24V 2 500mW 2Pin ALF Ammo (Alt: BZX79-B24,133) RoHS : Compliant | 0 | |||
BZX79-B2V4,133![]() | Nexperia | Diode Zener Single 24V 2 500mW 2Pin ALF Ammo (Alt: BZX79-B2V4,133) RoHS : Compliant | 0 | |||
BZX79-C2V4,133![]() | Nexperia | Diode Zener Single 24V 5 500mW 2Pin ALF Ammo (Alt: BZX79-C2V4,133) RoHS : Compliant | 0 | |||
| ISL41334IRZ-T7A | Renesas Electronics Corporation | (Alt: ISL41334IRZ-T7A) RoHS : Compliant | 0 | |||
![]() EBV Elektronik | ZGL41-33A-801E3/96 | Vishay Intertechnologies | Zener Diodes (Alt: ZGL41-33A-801E3/96) RoHS : Compliant | 24,000 | ||
| TSOP4133 | Vishay Intertechnologies | IR Sensor IC 33kHz e3 (Alt: TSOP4133) RoHS : Compliant | 0 | |||
| TSOP34133 | Vishay Intertechnologies | (Alt: TSOP34133) RoHS : Compliant | 0 | |||
| NJW4133GM1-TE1 | Nisshinbo Micro Devices | Switching Voltage Regulators Switching Reg 40V Boost Conv (Alt: NJW4133GM1-TE1) RoHS : Compliant | 0 | |||
| TGL41-33A-E3/97 | Vishay Intertechnologies | (Alt: TGL41-33A-E3/97) RoHS : Compliant | 0 | |||
| TGL41-33A-E3/96 | Vishay Intertechnologies | (Alt: TGL41-33A-E3/96) RoHS : Compliant | 0 | |||
| SGM2241-3.3QPMS8G/TR | SG Micro Corp | LDO Voltage Regulator Fixed 25 V to 40 V Single Output 900 mV Drop 33 V 300 mA 8 Pins (Alt: SGM2241-3.3QPMS8G/TR) RoHS : Compliant | 0 | |||
![]() Pasternack Enterprises US | PE3C4133 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to N Female Cable Using SPP-250-LLPL Coax, LF Solder. PE3C4133 is a 7/16 DIN male to N female cable using SPP-250-LLPL coax. This Pasternack 7/16 DIN male to N female cable assembly uses a 50 Ohm 7/16 DIN for connector 1 and a 50 Ohm N for connector 2. Our male 7/16 DIN to female N cable assembly uses a corrugated cable type that is 50 Ohm. Pasternack PE3C4133 7/16 DIN male to N female cable assembly is constructed with SPP-250-LLPL coax. | 518 | ||
| PE34413-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: MHV, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SHV, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm, Length: 36 inches. MHV Male to SHV Plug Cable 36 Inch Length Using RG141 Coax., Radio frequency assembly MHV male to SHV plug cable 36 inch length using RG141 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MHV male to SHV plug cable 36 inch length using RG141 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MHV to SHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MHV cable connection on one end and SHV cable connection on the other. Our MHV to SHV cable assemblies have a male gender on end 1 and plug on end 2. This MHV to SHV cable is a male to plug coax assembly, PE34413-36, can also be known as a MHV plug to SHV male cable assembly and will be shipped same-day as it is purchased. MHV plug to SHV male cable assembly PE34413-36 is built with RG141 which is a flexible coax type. The Pasternack flexible MHV cable assembly is manufactured with MHV to SHV cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this MHV male to SHV plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34413-36 can also be used in the other direction and will be SHV plug to MHV male cable assembly if the opposite connectivity is required. MHV plug to SHV male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MHV to SHV cable assembly for quick shipment worldwide. Variations of MHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MHV male to SHV plug cable 36 inch length using RG141 coax. |
| 356 | ||
| PE3C4133-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 12 inches. Plenum N Female to 7/16 DIN Male Low PIM Cable 12 Inch Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum N female to 7/16 DIN male low PIM cable 12 inch length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N female to 7/16 DIN male low PIM cable 12 inch length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with N type cable connection on one end and 7/16 DIN cable connection on the other. Our low PIM type N to 7/16 DIN cable assemblies have a female gender on end 1 and male on end 2. This N type to 7/16 DIN cable is a female to male coax assembly, PE3C4133-12, can also be known as a low PIM type N jack to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. Type N jack to 7/16 DIN plug cable assembly PE3C4133-12 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM N type female to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4133-12 can also be used in the other direction and will be 7/16 DIN male to type N female cable assembly if the opposite connectivity is required. Low PIM N type jack to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to 7/16 DIN cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N female to 7/16 DIN male low PIM cable 12 inch length using SPP-250-LLPL coax, LF solder. |
| 74 | ||
| PE3C4133-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 59.06 inches. Plenum N Female to 7/16 DIN Male Low PIM Cable 150 CM Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum N female to 7/16 DIN male low PIM cable 150 cm length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N female to 7/16 DIN male low PIM cable 150 cm length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and 7/16 DIN cable connection on the other. Our low PIM type N to 7/16 DIN cable assemblies have a female gender on end 1 and male on end 2. This type N to 7/16 DIN cable is a female to male coax assembly, PE3C4133-150CM, can also be known as a low PIM N type jack to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. Type N jack to 7/16 DIN plug cable assembly PE3C4133-150CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with N type to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM type N female to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4133-150CM can also be used in the other direction and will be 7/16 DIN male to type N female cable assembly if the opposite connectivity is required. Low PIM type N jack to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to 7/16 DIN cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N female to 7/16 DIN male low PIM cable 150 cm length using SPP-250-LLPL coax, LF solder. |
| 74 | ||
| PE3C4133-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 24 inches. Plenum N Female to 7/16 DIN Male Low PIM Cable 24 Inch Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum N female to 7/16 DIN male low PIM cable 24 inch length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N female to 7/16 DIN male low PIM cable 24 inch length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with N type cable connection on one end and 7/16 DIN cable connection on the other. Our low PIM type N to 7/16 DIN cable assemblies have a female gender on end 1 and male on end 2. This type N to 7/16 DIN cable is a female to male coax assembly, PE3C4133-24, can also be known as a low PIM N type jack to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. Type N jack to 7/16 DIN plug cable assembly PE3C4133-24 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM N type female to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4133-24 can also be used in the other direction and will be 7/16 DIN male to type N female cable assembly if the opposite connectivity is required. Low PIM type N jack to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to 7/16 DIN cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N female to 7/16 DIN male low PIM cable 24 inch length using SPP-250-LLPL coax, LF solder. |
| 74 | ||
| PE3C4133-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 36 inches. Plenum N Female to 7/16 DIN Male Low PIM Cable 36 Inch Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum N female to 7/16 DIN male low PIM cable 36 inch length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N female to 7/16 DIN male low PIM cable 36 inch length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with N type cable connection on one end and 7/16 DIN cable connection on the other. Our low PIM type N to 7/16 DIN cable assemblies have a female gender on end 1 and male on end 2. This N type to 7/16 DIN cable is a female to male coax assembly, PE3C4133-36, can also be known as a low PIM type N jack to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. Type N jack to 7/16 DIN plug cable assembly PE3C4133-36 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with N type to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM type N female to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4133-36 can also be used in the other direction and will be 7/16 DIN male to type N female cable assembly if the opposite connectivity is required. Low PIM type N jack to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to 7/16 DIN cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N female to 7/16 DIN male low PIM cable 36 inch length using SPP-250-LLPL coax, LF solder. |
| 74 | ||
| PE3C4133-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 48 inches. Plenum N Female to 7/16 DIN Male Low PIM Cable 48 Inch Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum N female to 7/16 DIN male low PIM cable 48 inch length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N female to 7/16 DIN male low PIM cable 48 inch length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and 7/16 DIN cable connection on the other. Our low PIM type N to 7/16 DIN cable assemblies have a female gender on end 1 and male on end 2. This N type to 7/16 DIN cable is a female to male coax assembly, PE3C4133-48, can also be known as a low PIM type N jack to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. Type N jack to 7/16 DIN plug cable assembly PE3C4133-48 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with N type to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM type N female to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4133-48 can also be used in the other direction and will be 7/16 DIN male to type N female cable assembly if the opposite connectivity is required. Low PIM N type jack to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to 7/16 DIN cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N female to 7/16 DIN male low PIM cable 48 inch length using SPP-250-LLPL coax, LF solder. |
| 74 | ||
| PE3C4133-50CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 19.69 inches. Plenum N Female to 7/16 DIN Male Low PIM Cable 50 CM Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum N female to 7/16 DIN male low PIM cable 50 cm length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N female to 7/16 DIN male low PIM cable 50 cm length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and 7/16 DIN cable connection on the other. Our low PIM N type to 7/16 DIN cable assemblies have a female gender on end 1 and male on end 2. This type N to 7/16 DIN cable is a female to male coax assembly, PE3C4133-50CM, can also be known as a low PIM N type jack to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. Type N jack to 7/16 DIN plug cable assembly PE3C4133-50CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM N type female to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4133-50CM can also be used in the other direction and will be 7/16 DIN male to type N female cable assembly if the opposite connectivity is required. Low PIM N type jack to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to 7/16 DIN cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N female to 7/16 DIN male low PIM cable 50 cm length using SPP-250-LLPL coax, LF solder. |
| 74 | ||
| PE3FCA413-30M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM3, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: ST, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 6.2 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 12-Fiber LC UPC to ST UPC, OM3 Multimode Distribution Cable, 6.2mm Riser, 2.0mm breakout, Aqua-30M. Pasternack’s PE3FCA413-30M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 30-meter long 12-fiber cable assembly is equipped with LC/UPC to ST/UPC connectors. Our aqua blue fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM3 fiber which is optimized for VCSEL laser sources, making it ideal for 10Gb Ethernet up to 300 meters and 40G/100G Ethernet up to 100 meters, and offers a bandwidth of 2000 MHz·km, ensuring high-speed data transmission with minimal signal loss. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 12-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA413-30M fiber optic cable with a 6.2 mm cable diameter and 47 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/UPC to ST/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Whether for enterprise networks, storage area networks (SANs), or high-speed backbones, this OM3 fiber assembly guarantees outstanding network performance. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM3 multimode fiber optic cable that meets your requirements. |
| 23 | ||
| PE3M0413-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Size: 12, Connector 1 Gender: Socket, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Mini SMP, Connector 2 Size: 12, Connector 2 Gender: Socket, Connector 2 Specification: MIL-DTL-38999, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR047FL, RF Cable Type: Coax, RF Cable Specification: PE-SR047FL datasheet, RF Cable Impedance : 50 Ohm. SMPM Size 12 Contact Socket to SMPM Size 12 Contact Socket Cable 36 Inch Length Using PE-SR047FL Coax with HeatShrink, LF Solder. The PE3M0413-36 from Pasternack is a D38999 contact cable assembly that is built with a size 12 mini SMP socket contact connection on one end and a mini SMP socket connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This mini SMP to mini SMP cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 20 GHz. This radio frequency cable assembly can withstand temperatures ranging from -55 to 100 degrees C. Our mini SMP socket to mini SMP socket cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0413-36 in-series RF cable has dB of minimum RF shielding. Mini SMP socket to mini SMP socket cable assembly is built with PE-SR047FL, which is a formable coax type. The Pasternack PE3M0413-36 formable cable assembly has a 50 Ohm impedance and is single shielded. Additional dimensions, specifications, and CAD drawings for this mini SMP to mini SMP RF cable are available on our downloadable PDF datasheet. Mini SMP socket to mini SMP socket cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of mini SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to mini SMP RF cable assembly as per your requirements. |
| 5 | ||
| PE3W14133/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. BNC Male to SSMA Female Cable Using RG316 Coax with HeatShrink. PE3W14133/HS is a BNC male to SSMA female cable using RG316 coax. This Pasternack BNC male to SSMA female cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SSMA for connector 2. Our male BNC to female SSMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W14133/HS BNC male to SSMA female cable assembly is constructed with RG316 coax. | 0 | |||
| PE3W04133 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. SMA Female to SSMC Plug Right Angle Cable Using RG174 Coax. PE3W04133 is a SMA female to SSMC plug right angle cable using RG174 coax. This Pasternack SMA female to SSMC plug right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SSMC for connector 2. SMA to SSMC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMA to plug SSMC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04133 SMA female to SSMC plug right angle cable assembly is constructed with RG174 coax. | 0 | |||
| PE3W24133 | Pasternack Enterprises | Key Specifications, Connector Series 1: LC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MHV, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG8A/U, RF Cable Type: RG8, RF Cable Impedance: 50 Ohm. LC Male to MHV Male Cable Using RG8 Coax. PE3W24133 is a LC male to MHV male cable using RG8 coax. This Pasternack LC male to MHV male cable assembly uses a 50 Ohm LC for connector 1 and a 50 Ohm MHV for connector 2. Our male LC to male MHV cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W24133 LC male to MHV male cable assembly is constructed with RG8 coax. | 0 | |||
| PE3C10413-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-400-FR, RF Cable Type: TCOM-400-FR, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Fire Rated N Male to N Male Low Loss Cable 36 Inch Length Using TCOM-400-FR Coax With Times Microwave Components., Radio frequency assembly fire rated N male to N male low loss cable 36 inch length using TCOM-400-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated N male to N male low loss cable 36 inch length using TCOM-400-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss a type N to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10413-36 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10413-36 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 100 dB. Type N plug to type N plug cable assembly PE3C10413-36 is built with TCOM-400-FR which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. |
| 0 | ||
| PE3C3413-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 36 inches. Reverse Polarity SMA Male to BNC Male Cable 36 Inch Length Using RG316 Coax., Radio frequency assembly reverse polarity SMA male to BNC male cable 36 inch length using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Reverse polarity SMA male to BNC male cable 36 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with reverse polarity SMA cable connection on one end and BNC cable connection on the other. Our reverse polarity SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. This reverse polarity SMA to BNC cable is a male to male coax assembly, PE3C3413-36, can also be known as a reverse polarity SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA plug to BNC plug cable assembly PE3C3413-36 is built with RG316 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency reverse polarity SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3413-36 can also be used in the other direction and will be BNC male to reverse polarity SMA male cable assembly if the opposite connectivity is required. SMA reverse polarity plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA male to BNC male cable 36 inch length using RG316 coax. |
| 0 | ||
![]() Vyrian | T4133412051-000 | TE Connectivity | Circular Connector, 5 Contact(s), Brass, Female, Receptacle RoHS : Compliant | 9,912 | ||
| XMS430FR4133IG48R | Texas Instruments | RISC Microcontroller, 16-Bit, FRAM, 16MHz, CMOS, PDSO48 RoHS : Compliant | 8,992 | |||
| T4133012121-000 | TE Connectivity | Circular Connector, 12 Contact(s), Brass, Female, Receptacle RoHS : Compliant | 7,678 | |||
| T4133012081-000 | TE Connectivity | Circular Connector, 8 Contact(s), Brass, Female, Receptacle RoHS : Compliant | 4,943 | |||
| T4133412041-000 | TE Connectivity | Circular Connector, 4 Contact(s), Brass, Female, Receptacle RoHS : Compliant | 4,307 | |||
| XMS430FR4133IG56R | Texas Instruments | RISC Microcontroller, 16-Bit, FRAM, 16MHz, CMOS, PDSO56 RoHS : Compliant | 4,086 | |||
XC4413-3PQ208I![]() | AMD Xilinx | Field Programmable Gate Array, CMOS, PQFP208 | 3,855 | |||
| XMS430FR4133IPMR | Texas Instruments | RISC Microcontroller, 16-Bit, FRAM, 16MHz, CMOS, PQFP64 | 3,659 | |||
XC4413-3PQ160I![]() | AMD Xilinx | Field Programmable Gate Array, CMOS, PQFP160 | 3,311 | |||
XC4413-3PQ208C![]() | AMD Xilinx | Field Programmable Gate Array, CMOS, PQFP208 | 3,292 | |||
XC4413-3PQ240I![]() | AMD Xilinx | Field Programmable Gate Array, CMOS, PQFP240 | 3,177 | |||
XC4413-3BG225I![]() | AMD Xilinx | Field Programmable Gate Array, CMOS, PBGA225 | 2,012 | |||
XC4413-3PQ160C![]() | AMD Xilinx | Field Programmable Gate Array, CMOS, PQFP160 | 1,880 | |||
XC4413-3BG225C![]() | AMD Xilinx | Field Programmable Gate Array, CMOS, PBGA225 | 1,281 | |||
XC4413-3PQ240C![]() | AMD Xilinx | Field Programmable Gate Array, CMOS, PQFP240 | 1,214 | |||
![]() Win Source Electronics | TLV74133PDBV | Texas Instruments | LDO Voltage Regulator 150mA 3.3V Fixed Output SOT-23-5 |
| 138,000 | |
TLV74133PDBVR![]() | Texas Instruments | IC REG LINEAR 3.3V 150MA SOT23-5 / Linear Voltage Regulator IC Positive Fixed 1 Output 150mA SOT-23-5 RoHS : Compliant |
| 130,490 | ||
MSP430FR4133IPM![]() | Texas Instruments | IC MCU 16BIT 15.5KB FRAM 64LQFP / MSP430 CPU16 series Microcontroller IC 16-Bit 16MHz 15.5KB (15.5K x 8) FRAM 64-LQFP (10x10) RoHS : Compliant |
| 60,000 | ||
MSP430FR4133IPMR![]() | Texas Instruments | Mixed-Signal Microcontrollers RoHS : Compliant |
| 30,000 | ||
MSP430FR4133IG56![]() | Texas Instruments | IC MCU 16BIT 15.5KB FRAM 56TSSOP RoHS : Compliant |
| 15,000 | ||
MSP430FR4133IG56R![]() | Texas Instruments | IC MCU 16BIT 15.5KB FRAM 56TSSOP RoHS : Compliant |
| 13,830 | ||
| BQ24133RGY | Texas Instruments | Li-Ion/Li-Pol Charger IC 2.5A 24-VQFN |
| 12,000 | ||
BQ24133RGYT![]() | Texas Instruments | IC BATT CHARGE LI-ION/POL 24VQFN RoHS : Compliant |
| 11,320 | ||
BQ24133RGYR![]() | Texas Instruments | IC BATT CHARGE LI-ION/POL 24VQFN RoHS : Compliant |
| 10,950 | ||
| ISL41334IRZ-T | Renesas Electronics Corporation | ±15kV ESD Protected, Two Port, Dual Protocol Transceivers | IC TXRX RS232/422/485 40QFN RoHS : Compliant |
| 6,120 | ||
| 61400413321 | Wurth Elektronik | CONN RCPT USB2.0 TYPEB 4POS VERT RoHS : Compliant |
| 4,200 | ||
MSP430FR4133IG48R![]() | Texas Instruments | IC MCU 16BIT 15.5KB FRAM 48TSSOP RoHS : Compliant |
| 3,500 | ||
SI4133-D-GT![]() | Silicon Laboratories Inc | IC SYNTHESIZR RF1/RF2/IF 24TSSOP RoHS : Compliant |
| 1,388 | ||
SI4133-D-GTR![]() | Silicon Laboratories Inc | IC SYNTHESIZR RF1/RF2/IF 24TSSOP RoHS : Compliant |
| 1,366 | ||
TSI384-133ILV![]() | Integrated Device Technology Inc | Tsi384™ PCIe® to PCI/X Bridge Product Brief RoHS : Compliant |
| 996 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |