480CCNFMNTZCWC Price, Distributor, Stock

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C400, RF Cable Type: PE-C400, RF Cable Impedance: 50 Ohm, Length: 36 inches. N Male to TNC Male Cable 36 Inch Length Using PE-C400 Coax., Radio frequency assembly N male to TNC male cable 36 inch length using PE-C400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N male to TNC male cable 36 inch length using PE-C400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and TNC cable connection on the other. Our low loss type N to TNC cable assemblies have a male gender on end 1 and male on end 2. This type N to TNC cable is a male to male coax assembly, PE34801-36, can also be known as a low loss N type plug to TNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to TNC plug cable assembly PE34801-36 is built with PE-C400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency type N male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34801-36 can also be used in the other direction and will be TNC male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to TNC male cable 36 inch length using PE-C400 coax.

1 : $124.99
25 : $118.74
50 : $112.49
100 : $107.49

639

PE3C4801-50CM

Pasternack Enterprises

Key Specifications, Connector Series 1: SSMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 19.69 inches. SSMB Plug Right Angle to SSMB Plug Right Angle Cable 50 CM Length Using RG178 Coax., Radio frequency assembly SSMB plug right angle to SSMB plug right angle cable 50 cm length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SSMB plug right angle to SSMB plug right angle cable 50 cm length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SSMB to SSMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SSMB cable connection on one end and right angle SSMB cable connection on the other. Our right angle SSMB to right angle SSMB cable assemblies have a plug gender on end 1 and plug on end 2. This SSMB to SSMB cable is a plug to plug coax assembly, PE3C4801-50CM, can also be known as a right angle SSMB male to right angle SSMB male cable assembly and will be shipped same-day as it is purchased. SSMB male to SSMB male cable assembly PE3C4801-50CM is built with RG178 which is a flexible coax type. The Pasternack flexible SSMB cable assembly is manufactured with right angle SSMB to right angle SSMB cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SSMB right angle plug to SSMB right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SSMB right angle male to SSMB right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SSMB to SSMB cable assembly for quick shipment worldwide. Variations of SSMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SSMB plug right angle to SSMB plug right angle cable 50 cm length using RG178 coax.

1 : $81.39
25 : $77.32
50 : $73.25
100 : $70.0

PE3C4801-24

Pasternack Enterprises

Key Specifications, Connector Series 1: SSMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 24 inches. SSMB Plug Right Angle to SSMB Plug Right Angle Cable 24 Inch Length Using RG178 Coax., Radio frequency assembly SSMB plug right angle to SSMB plug right angle cable 24 inch length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SSMB plug right angle to SSMB plug right angle cable 24 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SSMB to SSMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SSMB cable connection on one end and right angle SSMB cable connection on the other. Our right angle SSMB to right angle SSMB cable assemblies have a plug gender on end 1 and plug on end 2. This SSMB to SSMB cable is a plug to plug coax assembly, PE3C4801-24, can also be known as a right angle SSMB male to right angle SSMB male cable assembly and will be shipped same-day as it is purchased. SSMB male to SSMB male cable assembly PE3C4801-24 is built with RG178 which is a flexible coax type. The Pasternack flexible SSMB cable assembly is manufactured with right angle SSMB to right angle SSMB cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SSMB right angle plug to SSMB right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SSMB right angle male to SSMB right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SSMB to SSMB cable assembly for quick shipment worldwide. Variations of SSMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SSMB plug right angle to SSMB plug right angle cable 24 inch length using RG178 coax.

1 : $82.39
25 : $78.27
50 : $74.15
100 : $70.86

PE3W04805LF/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. N Male Right Angle to TNC Male Right Angle Low Loss Cable Using LMR-400-UF Coax with HeatShrink, LF Solder., Radio frequency assembly N male right angle to TNC male right angle low loss cable using LMR-400-UF coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to TNC male right angle low loss cable using LMR-400-UF coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle type N cable connection on one end and a right angle TNC cable connection on the other. Our low loss right angle type N to right angle TNC cable assembly has a male gender on end 1 and a male on end 2. PE3W04805LF/HS can also be known as a low loss right angle type N plug to right angle TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W04805LF/HS RF cable has a TPE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our right angle type N male to right angle TNC male cable has a maximum VSWR of 1.4:1. Type N plug to TNC plug cable assembly PE3W04805LF/HS is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with right angle type N to right angle TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W04805LF/HS can also be used in the other direction and will be a right angle TNC male to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to TNC right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

PE3W04802-48

Pasternack Enterprises

Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm, Length: 48 inches. SMP Female Right Angle to SMP Female Right Angle Cable 48 Inch Length Using PE-047SR Coax., Radio frequency assembly SMP female right angle to SMP female right angle cable 48 inch length using PE-047SR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMP female right angle to SMP female right angle cable 48 inch length using PE-047SR coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMP cable connection on one end and right angle SMP cable connection on the other. Our right angle SMP to right angle SMP cable assemblies have a female gender on end 1 and female on end 2. This SMP to SMP cable is a female to female coax assembly, PE3W04802-48, can also be known as a right angle SMP jack to right angle SMP jack cable assembly and will be shipped same-day as it is purchased. SMP jack to SMP jack cable assembly PE3W04802-48 is built with PE-047SR which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with right angle SMP to right angle SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 8 GHz maximum frequency SMP right angle female to SMP right angle female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMP right angle jack to SMP right angle jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMP female right angle to SMP female right angle cable 48 inch length using PE-047SR coax.

1 : $117.99
25 : $112.09
50 : $106.19
100 : $101.47

PE48010

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: SMB, Connector Gender: Jack, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Crimp, Mount Method: Bulkhead, Minimum Frequency: DC, Maximum Frequency: 1.2 GHz, Interface Type 1: LMR-100, Interface Type 2: PE-B100, Interface Type 3: PE-C100, Interface Type 4: 0.100 Inch. SMB Jack Bulkhead Mount Connector Crimp Attachment for LMR-100, PE-B100, PE-C100, 0.100 Inch cable. PE48010 SMB jack bulkhead coaxial connector has an interface type of SMB jack, which is compatible with LMR®-100, PE-B100, PE-C100 and 0.100 inch cables, and has an impedance of 50 Ohms. Pasternack’s SMB jack bulkhead connector uses crimp as an attachment method. Our jack SMB coaxial connector provides a maximum frequency of 1.2 GHz. This SMB jack RF connector is stocked to be readily available for same business day shipment and can also be designed onto custom cable configurations using our online cable creator. The Pasternack SMB jack bulkhead coaxial connector has a PTFE dielectric type and a VSWR of 1.2:1. Pasternack’s SMB coaxial connector has a brass body with gold over nickel over copper plating. Our PE48010 SMB connector uses a gold over nickel over copper-plated brass contact. The Pasternack RF connector has a maximum inner and outer conductor resistance of 5 mOhms and 2.5 mOhms respectively. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. The radio frequency connector made from brass material has a contact life of 500 cycles or more. The PE48010 SMB bulkhead connector operates at a temperature range of -65 to 165 deg C. This SMB connector has a gold over nickel over copper inner contact plating. The Pasternack SMB jack connector has a maximum operating voltage of 335 Vrms and a dielectric withstanding voltage of 1,000 Vrms. This coaxial RF connector comes with a minimum insulation resistance of 10,000 MOhms. Our SMB jack connector has a length of 0.256 inches, a width of 0.256 inches, and a weight of 0.004 lbs. This Pasternack jack SMB bulkhead connector will ship the same business day as purchased. Our bulkhead SMB jack coaxial connector is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $24.79
25 : $23.55
50 : $22.31
100 : $21.32

PE48013

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: SMB, Connector Gender: Jack, Impedance: 50 Ohm, Body Style: Right Angle, Attachment Method: Crimp, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 4 GHz, Interface Type 1: LMR-100, Interface Type 2: PE-B100, Interface Type 3: PE-C100, Interface Type 4: 0.100 Inch. SMB Jack Right Angle Connector Crimp Attachment for LMR-100, PE-B100, PE-C100, 0.100 Inch Cable. PE48013 SMB jack right angle coaxial connector has an interface type of SMB jack, which is compatible with LMR®-100, PE-B100, PE-C100 and 0.100 inch cables, and has an impedance of 50 Ohms. Pasternack’s SMB jack connector uses crimp as an attachment method. Our jack SMB right angle coaxial connector provides a maximum frequency of 4 GHz. This SMB jack RF connector is stocked to be readily available for same business day shipment and can also be designed onto custom cable configurations using our online cable creator. The Pasternack right angle SMB jack coaxial connector has a PTFE dielectric type and a VSWR of 1.2:1. Pasternack’s SMB coaxial connector has a brass body with gold over nickel over copper plating. Our PE48013 SMB right angle connector uses a gold over nickel over copper-plated brass contact. The Pasternack RF connector has a maximum inner and outer conductor resistance of 5 mOhms and 2.5 mOhms respectively. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. The radio frequency connector made from brass material has a contact life of 500 cycles or more. The PE48013 SMB connector operates at a temperature range of -65 to 165 deg C. This right angle SMB connector has a gold over nickel over copper inner contact plating. The Pasternack SMB jack connector has a maximum operating voltage of 335 Vrms and a dielectric withstanding voltage of 1,000 Vrms. This coaxial RF connector comes with a minimum insulation resistance of 10,000 MOhms. Our right angle SMB jack connector has a length of 0.506 inches, a width of 0.506 inches, and a weight of 0.006 lbs. This Pasternack right angle jack SMB connector will ship the same business day as purchased. Our SMB right angle jack coaxial connector is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $30.59
25 : $29.06
50 : $27.53
100 : $26.31

PE3MSA00480-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 48 inches. Lead Free 3-Lug TRB Jack to Jack for 78 Ohm PE-30-02003, 48" Cable., Radio frequency assembly lead free 3-Lug TRB jack to jack for 78 Ohm PE-30-02003, 48" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Lead free 3-Lug TRB jack to jack for 78 Ohm PE-30-02003, 48" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a jack gender on end 1 and jack on end 2. PE3MSA00480-48 can also be known as a 1553 TRB female to TRB female cable assembly and will be shipped same-day as it is purchased. TRB female to TRB female cable assembly PE3MSA00480-48 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB jack to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB female to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this lead free 3-Lug TRB jack to jack for 78 Ohm PE-30-02003, 48" cable.

1 : $201.99
25 : $191.89
50 : $181.79
100 : $173.71

PE3W16480/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Female Bulkhead to SMA Male Cable Using RG316 Coax with HeatShrink. PE3W16480/HS is a reverse polarity TNC female bulkhead to SMA male cable using RG316 coax. This Pasternack reverse polarity TNC female bulkhead to SMA male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMA for connector 2. Our reverse polarity female TNC bulkhead to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16480/HS TNC reverse polarity female bulkhead to SMA male cable assembly is constructed with RG316 coax.

PE44807

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: N, Connector Gender: Female, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Clamp/Solder, Mount Method: Bulkhead, Minimum Frequency: DC, Maximum Frequency: 18 GHz, Interface Type 1: PE-P300LL. N Female Bulkhead Mount Precision Connector Clamp/Solder Attachment for PE-P300LL. PE44807 type N female bulkhead coaxial connector has an interface type of PE-P300LL and a 50 Ohm impedance. Pasternack type N female bulkhead connector uses shield/contact clamp/solder as an attachment method. Our female N type coaxial connector provides a minimum frequency of DC and a maximum frequency of 18 GHz. The Pasternack type N female bulkhead coaxial connector has a PEI dielectric type and a VSWR of 1.16. The Pasternack type N coaxial connector has a passivated stainless steel body. Our PE44807 type N connector uses beryllium copper contact. This type N female bulkhead coaxial RF connector is RoHS and REACH compliant. This Pasternack female N type bulkhead connector will ship the same day as purchased. Our bulkhead type N female connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom type N connector cable assemblies that will ship the same day as well.

1 : $201.99
25 : $191.89
50 : $181.79
100 : $173.71

PE48047

Pasternack Enterprises

1 : $190.99
5 : $187.17
10 : $183.35
25 : $179.53

PE3480LF/HSRD

Pasternack Enterprises

PE3C1480

Pasternack Enterprises

PE3W14803LF

Pasternack Enterprises

Key Specifications, Connector Series 1: HN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. HN Male to N Male Right Angle Cable Using RG142 Coax, LF Solder. PE3W14803LF is a HN male to N male right angle cable using RG142 coax. This Pasternack HN male to N male right angle cable assembly uses a 50 Ohm HN for connector 1 and a 50 Ohm N for connector 2. HN to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male HN to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W14803LF HN male to N male right angle cable assembly is constructed with RG142 coax.

PE48095

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: SMP, Connector Gender: Male, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Solder, Mount Method: Bulkhead, Minimum Frequency: DC, Maximum Frequency: 26.5 GHz, Interface Type 1: PE-SR405AL, Interface Type 2: PE-SR405FL, Interface Type 3: PE-SR405FLJ, Interface Type 4: PE-SR405TN, Interface Type 5: RG405. SMP Male Bulkhead Mount Engineering Grade Smooth Bore Connector Solder Attachment for PE-SR405AL, PE-SR405FL, PE-SR405FLJ, PE-SR405TN, RG405. PE48095 SMP male bulkhead coaxial engineering grade smooth bore connector has an interface type of SMP male, which is compatible with PE-SR405AL, PE-SR405FL, PE-SR405FLJ, PE-SR405TN and RG405 cables, and has an impedance of 50 Ohms. Pasternack’s SMP male bulkhead connector uses solder as an attachment method. Our male SMP coaxial connector provides a maximum frequency of 26.5 GHz. This SMP male engineering grade RF connector is stocked to be readily available for same business day shipment and can also be designed onto custom cable configurations using our online cable creator. The Pasternack SMP male bulkhead coaxial smooth bore connector has a PTFE dielectric type and a VSWR of 1.25:1. Pasternack’s SMP coaxial connector has a passivated stainless steel body. Our PE48095 SMP connector uses a gold over nickel-phosphorus alloy over copper-plated beryllium copper contact. The Pasternack engineering grade RF connector has a maximum inner and outer conductor resistance of 6 mOhms and 2 mOhms, respectively. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. The radio frequency connector made from passivated stainless steel material has a contact life of 1000 cycles or more. The PE48095 SMP bulkhead engineering grade connector operates at a temperature range of -65 to 165 deg C. Our push-on male SMP coaxial RF connector has a maximum insertion loss of 0.309 dB. This SMP connector has a gold over nickel-phosphorus alloy over copper inner contact plating. The Pasternack engineering grade SMP male connector has a maximum operating voltage of 335 Vrms and a dielectric withstanding voltage of 500 Vrms. This coaxial RF connector comes with a minimum insulation resistance of 5,000 MOhms. Our SMP male connector has a length of 0.366 inches, a width of 0.229 inches, and a weight of 0.05 lbs. This engineering grade push-on SMP male coaxial connector features a passivated stainless steel coupling nut. This Pasternack engineering grade male SMP bulkhead connector will ship the same business day as purchased. Our bulkhead SMP male coaxial connector is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements.

1 : $49.99
25 : $47.99
50 : $46.49
100 : $45.49

Teledyne HiRel

5962-8764804XA

Teledyne HiRel

PROM, UV ERASABLE, 64K X 8, 120 NS ACCESS TIME
RoHS : Not Compliant

M38510/34803B2A

Teledyne HiRel

BUS TRANSCEIVER, 8-BIT, WITH INVERTING 3-STATE OUTPUTS
RoHS : Not Compliant

5962-8764804ZA

Teledyne HiRel

PROM, UV ERASABLE, 64K X 8, 120 NS ACCESS TIME
RoHS : Not Compliant

5962-9314801M2A

Teledyne HiRel

FLIP-FLOP, D-TYPE, 8-BIT, WITH CLOCK ENABLE, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-8764801XA

Teledyne HiRel

PROM, UV ERASABLE, 64K X 8, 150 NS ACCESS TIME
RoHS : Not Compliant

5962-9314801Q2A

Teledyne HiRel

FLIP-FLOP, D-TYPE, 8-BIT, WITH CLOCK ENABLE, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-9214801QRA

Teledyne HiRel

BUS TRANSCEIVER, 8-BIT, WITH INVERTING 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-8764805XA

Teledyne HiRel

PROM, UV ERASABLE, 64K X 8, 90 NS ACCESS TIME
RoHS : Not Compliant

5962-8764806XA

Teledyne HiRel

PROM, UV ERASABLE, 64K X 8, 70 NS ACCESS TIME
RoHS : Not Compliant

5962-8764801ZA

Teledyne HiRel

PROM, UV ERASABLE, 64K X 8, 150 NS ACCESS TIME
RoHS : Not Compliant

5962-9314801QSA

Teledyne HiRel

FLIP-FLOP, D-TYPE, 8-BIT, WITH CLOCK ENABLE, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-8764802XA

Teledyne HiRel

PROM, UV ERASABLE, 64K X 8, 200 NS ACCESS TIME
RoHS : Not Compliant

M38510/34803BSA

Teledyne HiRel

BUS TRANSCEIVER, 8-BIT, WITH INVERTING 3-STATE OUTPUTS
RoHS : Not Compliant

5962-8764804YA

Teledyne HiRel

PROM, UV ERASABLE, 64K X 8, 120 NS ACCESS TIME
RoHS : Not Compliant

5962-8764802YA

Teledyne HiRel

PROM, UV ERASABLE, 64K X 8, 200 NS ACCESS TIME
RoHS : Not Compliant

Venkel Ltd.

HPTF0805-TC-3480AT

VENKEL LTD

High Power Thin Film CR;0805;1/4W;�50PPM;348R;�0.05%
RoHS : Compliant

HPTF1206-TE-3480UT

VENKEL LTD

High Power Thin Film CR;1206;1/4W;�25PPM;348R;�0.01%
RoHS : Compliant

HPTF2512-WE-3480AT

VENKEL LTD

High Power Thin Film CR;2512;3/4W;�25PPM;348R;�0.05%
RoHS : Compliant

MELFC0102-RK-3480FT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/8W;�100PPM;348R;�1%
RoHS : Compliant

MELFC0207-VE-3480DT

VENKEL LTD

MELF Coated Thin Film CR;0207;1/2W;�25PPM;348R;�0.5%
RoHS : Compliant

HPTF0603-QC-3480UT

VENKEL LTD

High Power Thin Film CR;0603;1/10W;�50PPM;348R;�0.01%
RoHS : Compliant

HPTF0603-QP-3480DT

VENKEL LTD

High Power Thin Film CR;0603;1/10W;�5PPM;348R;�0.5%
RoHS : Compliant

HPTF0603-SC-3480AT

VENKEL LTD

High Power Thin Film CR;0603;1/6W;�50PPM;348R;�0.05%
RoHS : Compliant

HPTF1210-UN-3480UT

VENKEL LTD

High Power Thin Film CR;1210;1/3W;�10PPM;348R;�0.01%
RoHS : Compliant

HPTF2010-UE-3480CT

VENKEL LTD

High Power Thin Film CR;2010;1/3W;�25PPM;348R;�0.25%
RoHS : Compliant

HPTF2010-UN-3480BT

VENKEL LTD

High Power Thin Film CR;2010;1/3W;�10PPM;348R;�0.1%
RoHS : Compliant

AGCR2010-XK-3480FT

VENKEL LTD

Auto Grade Resistor;2010;1W;�100PPM;348R;�1%
RoHS : Compliant

MELFC0204-ZZ-3480FT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�15PPM;348R;�1%
RoHS : Compliant

MELFM0207-VE-3480DT

VENKEL LTD

MELF Molded Thin Film CR;0207;1/2W;�25PPM;348R;�0.5%
RoHS : Not Compliant

MELFC0102-UZ-3480BT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/5W;�15PPM;348R;�0.1%
RoHS : Compliant

Waytek, Inc.

35232480

Aptiv PLC

Metri-Pack 480 Cavity Plug 8.5 MM DELPHI PN 12066082

50 : $0.1322
200 : $0.1233
500 : $0.1124
1,000 : $0.1048
5,000 : $0.0999

46,399

12048074

Aptiv PLC

Metri-Pack 150 Series Female 18-16GA 12048074 Terminal Reel 3000/Reel Tang
RoHS : Compliant

3,000 : $0.057
15,000 : $0.0565

42,000

12048074-L

Aptiv PLC

The Aptiv 12048074 is a Metri-Pack 150 Series sealed female terminal designed for reliable automotive electrical connections in harsh environments. Compatible with 1816 Ga. wire (0.51.0 mm), it features a crimp termination with dual crimp zones for both the conductor and seal, ensuring secure electrical contact and environmental protection. Constructed from tin-plated copper alloy, it provides excellent conductivity and corrosion resistance, with a current rating up to ~14A. Designed for use with Metri-Pack 150 connector housings, it includes a locking lance for secure terminal retention and operates reliably from -40C to +125C, making it ideal for automotive, marine, and industrial applications.

100 : $0.14
200 : $0.1319
500 : $0.1249
1,000 : $0.1168
5,000 : $0.1133

38,930

33472-4801

Molex

The Molex 33472-4801 is an MX150 1.5 mm sealed female connector housing designed for compact, high-reliability wire-to-wire connections in automotive and harsh environments. It features an 8-circuit (8-pin), dual-row (2x4) configuration with keying option A, ensuring proper mating and preventing misconnection. Constructed from durable thermoplastic, it provides environmental sealing when used with MX150 terminals and seals, protecting against moisture, dirt, and vibration. With a 3.5 mm pitch and -40C to +125C operating range, it is ideal for automotive, marine, and industrial applications.
RoHS : Compliant

1 : $2.5571
10 : $2.4378
50 : $2.3296
100 : $2.178
200 : $2.0803
500 : $1.9827

2,703

T250R0X2 111-24801

HellermannTyton

HellermannTyton T250R0X2 heavy-duty cable tie is a 20" long high-strength tie built for securing large wire bundles, hoses, and tubing. Its one-piece self-locking design supports fast installation and dependable hold in demanding electrical, industrial, and harness-routing applications.

25 : $1.6545
50 : $1.5459
100 : $1.4182
200 : $1.3671
500 : $1.3095
1,000 : $1.2584

2,125

57480 OR 611-048

Ideal Clamp Products Inc

Standard Stainless Steel Band Hose Clamp #48 Band 1/2" 1-1/2" TO 3-1/2"

10 : $2.0303
50 : $1.8048
100 : $1.6377
200 : $1.5875
500 : $1.529
1,000 : $1.4705

780

1648-009-070-15

70A Circuit Breaker UL1500 50V Ignition Proof Panel Mount UL 1077 7/16" 28 DIECAST MOUNT

1 : $17.28
10 : $14.87
50 : $13.54
100 : $13.11
200 : $12.74
500 : $12.37

528

1648-009-050-15

50A Circuit Breaker UL1500 50V Ignition Proof Panel Mount UL 1077 7/16" 28 DIECAST MOUNT

1 : $15.43
10 : $13.27
50 : $12.08
100 : $11.75
200 : $11.36
500 : $11.09

101

M-448-02

Cole Hersee

Terminal Block Common BusBar 20-Gang Screw TypeTin-Plated

1 : $59.87
5 : $53.24
10 : $49.8
50 : $47.15
100 : $44.77
200 : $42.65

48090

Cole Hersee

90A Battery Isolator 3 Studs 1/4"

1 : $103.27
5 : $96.61
10 : $90.5
25 : $86.05
50 : $82.73

1648-009-040-15

40A Circuit Breaker UL1500 50V Ignition Proof Panel Mount UL 1077 7/16" 28 DIECAST MOUNT

1 : $15.5
10 : $13.33
50 : $12.14
100 : $11.75
200 : $11.42
500 : $11.09

5990-480V

Hillsdale Terminal & Tool Inc

The Hillsdale Termimal 22258 Vinyl Terminal Kit is a 480-piece assortment of solderless, vinyl-insulated terminals designed for versatile wire termination and repair. It includes a mix of ring, spade, and butt connectors, and quick-disconnect terminals covering 2210 Ga. wire sizes (red, blue, yellow). Packaged in an organized case, it provides durable, corrosion-resistant connections for automotive, marine, and industrial applications.

1 : $77.27
10 : $72.46

1648-009-060-15

60A Circuit Breaker UL1500 50V Ignition Proof Panel Mount UL 1077 7/16" 28 DIECAST MOUNT

1 : $16.19
10 : $13.93
50 : $12.69
100 : $12.28
200 : $11.94
500 : $11.59

480CCNFMNTZCWC Distributor

Link URL