| Electronic Components Datasheet Search |
|
4863G-S16-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Avnet Americas | TDA4863GXUMA2![]() | Infineon Technologies AG | Power Factor Correction CONTRLR 0.02mA 8-Pin DSO - Tape and Reel (Alt: TDA4863GXUMA2) RoHS : Compliant |
| 7,500 | |
| 2-644486-3 | TE Connectivity | Conn Shrouded Header 3 POS 2.54mm Solder ST Through Hole - Bag (Alt: 2-644486-3) RoHS : Compliant |
| 300 | ||
| C10-737486-3AS3 | Amphenol Corporation | Conn Power PL 3 POS Crimp ST Cable Mount 3 Terminal 1 Port - Bag (Alt: C10-737486-3AS3) RoHS : Not Compliant | 50 | |||
| C10-737486-3YS4 | Amphenol Corporation | Conn Power PL 3 POS Crimp ST Cable Mount 3 Terminal 1 Port - Bag (Alt: C10-737486-3YS4) RoHS : Not Compliant | 46 | |||
| C10-737486-3YS3 | Amphenol Corporation | Conn Power PL 3 POS Crimp ST Cable Mount 3 Terminal 1 Port - Bag (Alt: C10-737486-3YS3) RoHS : Not Compliant | 37 | |||
| C10-737486-3AS4 | Amphenol Corporation | - Bag (Alt: C10-737486-3AS4) RoHS : Not Compliant | 37 | |||
| 3-1658486-3 | TE Connectivity | - Trays (Alt: 3-1658486-3) RoHS : Compliant |
| 0 | ||
| RNC65J4863FRB14 | Vishay Intertechnologies | Through Hole Resistor, 486 kohm, ERC RNC Series, 250 mW, ? 1%, Axial Leaded, 300 V, Metal Film - Bulk (Alt: RNC65J4863FRB14) RoHS : Not Compliant |
| 0 | ||
| 5159009486354111LF | Amphenol Corporation | Conn DIN 41612 M 48 POS 5.08mm Solder RA Thru-Hole Box - Trays (Alt: 5159009486354111LF) RoHS : Compliant |
| 0 | ||
| MKP1848635704P4 | Vishay Intertechnologies | - Bulk (Alt: MKP1848635704P4) RoHS : Compliant |
| 0 | ||
| 5-1589486-3 | TE Connectivity | Connector Wire to Board Receptacle 25 Position 0.635mm Straight Surface Mount - Bag (Alt: 5-1589486-3) RoHS : Not Compliant | 0 | |||
| 2-5583486-3 | TE Connectivity | Conn Card Edge SKT 56 POS 3.96mm Solder ST Thru-Hole - Trays (Alt: 2-5583486-3) RoHS : Compliant | 0 | |||
| 170M4863D | Eaton Corporation | - Bulk (Alt: 170M4863D) RoHS : Compliant |
| 0 | ||
| 1986486-3 | TE Connectivity | - Bulk (Alt: 1986486-3) RoHS : Compliant | 0 | |||
| 3848630 | Advanced Energy Industries Inc | REPLACEMENT OPTICS 3 FOR IS 12 / IGA 12, IS 12-AL (MB 10,5), A = 250MM - Bag (Alt: 3848630) RoHS : Not Compliant |
| 0 | ||
![]() Newark | 284863-1 | TE Connectivity | SINGLE WIRE SEAL, ORANGE, SILICONE; RoHS : Compliant |
| 22,843 | |
| MP014863 | SPC Multicomp | CONN HOUSING, RCPT, 5POS, 1ROW, 1.25MM; RoHS : Compliant |
| 3,000 | ||
| 2-644486-3 | TE Connectivity | CONN, HEADER, 3POS, 1ROW, 2.54MM; RoHS : Compliant |
| 2,957 | ||
| 014.86.353 | ETTINGER | MOUNTING BRACKETS, 15X12-M3; RoHS : Compliant |
| 1,814 | ||
| 0054486399 | Weller Hand Tools GmbH | XNT KN SOLDERING TIP 2.0MM; RoHS : Compliant |
| 428 | ||
| 354863-E | TE Connectivity | MICROSTAC; RoHS : Compliant |
| 400 | ||
| MKP1848630094Y2 | Vishay Intertechnologies | FILM CAPACITOR, 30UF, 900V, RADIAL; RoHS : Compliant |
| 45 | ||
| THT-17-486-3 | Brady Worldwide Inc | LABEL, BRADY THT-17-486-3; RoHS : Not Compliant |
| 37 | ||
| MKP1848630924Y5 | Vishay Intertechnologies | FILM CAPACITOR, 30UF, 1.2KV, RADIAL; RoHS : Compliant |
| 30 | ||
848633-001![]() | TE Connectivity | HEAT SHRINK BOOT, BLACK, NYLON, 97.8MM; RoHS : Compliant |
| 28 | ||
| FMCA2486-36 | Fairview Microwave Inc | COAX CABLE ASSEMBLY; RoHS : Not Compliant |
| 16 | ||
| 20848-636 | nVent Schroff | REAR PANEL, 128.4MM X 426.4MM, ALUMINIUM; Panel Type:Rear Panel; Rack U Height:3U; Panel Material:Aluminum; Body Color:-; For Use With:RatiopacPRO Desktop Cases; External Height - Metric:128.4mm; External Width - Metric:426.4mm RoHS Compliant: Yes RoHS : Compliant |
| 14 | ||
| THT-18-486-3 | Brady Worldwide Inc | ADHESIVE CABLE MANAGEMENT ACCESSORIES; RoHS : Compliant |
| 14 | ||
| THT-53-486-3 | Brady Worldwide Inc | ADHESIVE CABLE MANAGEMENT ACCESSORIES; RoHS : Compliant |
| 11 | ||
| THT-7-486-3 | Brady Worldwide Inc | ADHESIVE CABLE MANAGEMENT ACCESSORIES; RoHS : Compliant |
| 1 | ||
![]() RS | 4548-632-AL | RAF Electronic Hardware | HEX MALE-FEMALE STANDOFF;1/4 HEX X 1-3/8 LENGTH |
| 212 | |
| 486306 | RS Pro | MANUAL BALL VALVE 2-WAY NICKEL PLATED BRASS 22MM BSPP COMPRESSION 232PSI |
| 94 | ||
| 4548-632-SS | RAF Electronic Hardware | STANDOFF; 1/4 HEX MALE/FEMALE; 6-32 THREAD;STAINLESS STEEL; 1.375LENGTH |
| 51 | ||
| 486334 | RS Pro | CHROME PLATED BRASS LINE MOUNTING HYDRAULIC BALL VALVE G 1/4 |
| 40 | ||
| 486344 | RS Pro | 28MM MANUAL BALL VALVE NICKEL PLATED BRASS 28 MM BSPP |
| 29 | ||
| 1224863 | RS Pro | RECHARGEABLE LEAD ACID BATTERY 80AH 12V AGM GENERAL PURPOSE T6 TERMINATION |
| 16 | ||
| 1424863 | Phoenix Contact | HC-STA-B48-BWS-EMC-AL RoHS : Compliant |
| 3 | ||
| 2834863 | RS Pro | M8 TO ACTUATOR/SENSOR CABLE, STRAIGHT FEMALE 3 WAY, PVC, BLACK, 15M |
| 2 | ||
| 24863 | CR Seals | SINGLE LIP GREASE SEAL, I.D. 2.5 IN, O.D. 3 IN, THICKNESS 0.25 IN |
| 1 | ||
| 486350 | RS Pro | CHROME PLATED BRASS LINE MOUNTING HYDRAULIC BALL VALVE G 1/2 |
| 1 | ||
| THT-17-486-3 | Brady Worldwide Inc | THERMAL TRANSFER METALLIZED POLYESTER LABEL 1"H X 2"W ROLL OF 3000 LABELS |
| 1 | ||
| D12EP6FPQ6 (48631) | Banner Engineering Corp | D12EP6FPQ6 5 PIN EURO CONN, D12 SERIES |
| 1 | ||
| BI15U-EM30WD-AN6X-0.2M-RSV 4T (1634863) | TURCK Inc | PROXIMITY SENSOR, UPROX, 15MM SENSING DISTANCENO, NPN, FLUSH MOUNT |
| 1 | ||
| 4863 | Keystone Electronics Corp | STANDOFF, FORCE-FIT, ROUND, THREADED 4-40, LENGTH .250, OD .219, STAINLESS STEEL |
| 0 | ||
| 4863 | Adafruit Industries | ADAFRUIT CYBERDECK HAT FOR RASPBERRY PI 400 |
| 0 | ||
![]() Microchip Technology Inc | 999-48637-002 | Microchip Technology Inc | TIMEPICTRA 2YR SUBSCRIPTION FOR SYNCSERVER, XLI, TP100, 3RD PARTY SNMP, Projected EOL: - Contact for Pricing | 0 | ||
| 999-48639-001 | Microchip Technology Inc | TIMEPICTRA 1YR SUBSCRIPTION FOR IGM, Projected EOL: - Contact for Pricing | 0 | |||
| 999-48639-003 | Microchip Technology Inc | TIMEPICTRA 3YR SUBSCRIPTION FOR IGM, Projected EOL: - Contact for Pricing | 0 | |||
| 999-48638-002 | Microchip Technology Inc | TIMEPICTRA 2YR SUBSCRIPTION FOR EDGE GRAND MASTER (TP4X00, TP2X00), Projected EOL: - Contact for Pricing | 0 | |||
| 999-48638-001 | Microchip Technology Inc | TIMEPICTRA 1YR SUBSCRIPTION FOR EDGE GRAND MASTER (TP4X00, TP2X00), Projected EOL: - Contact for Pricing | 0 | |||
| 999-48638-003 | Microchip Technology Inc | TIMEPICTRA 3YR SUBSCRIPTION FOR EDGE GRAND MASTER (TP4X00, TP2X00), Projected EOL: - Contact for Pricing | 0 | |||
| 999-48631-002 | Microchip Technology Inc | TIMEPICTRA 2YR SUBSCRIPTION FOR EDGE SSU (TP 1X00), Projected EOL: - Contact for Pricing | 0 | |||
| 999-48631-003 | Microchip Technology Inc | TIMEPICTRA 3YR SUBSCRIPTION FOR EDGE SSU (TP 1X00), Projected EOL: - Contact for Pricing | 0 | |||
| 999-48639-002 | Microchip Technology Inc | TIMEPICTRA 2YR SUBSCRIPTION FOR IGM, Projected EOL: - Contact for Pricing | 0 | |||
| 999-48631-001 | Microchip Technology Inc | TIMEPICTRA 1YR SUBSCRIPTION FOR EDGE SSU (TP 1X00), Projected EOL: - Contact for Pricing | 0 | |||
| 999-48637-001 | Microchip Technology Inc | TIMEPICTRA 1YR SUBSCRIPTION FOR SYNCSERVER, XLI, TP100, 3RD PARTY SNMP, Projected EOL: - Contact for Pricing | 0 | |||
| 999-48633-001 | Microchip Technology Inc | TIMEPICTRA 1YR SUBSCRIPTION FOR PTP CORE GRAND MASTER (TP 5000), Projected EOL: - Contact for Pricing | 0 | |||
| 999-48633-002 | Microchip Technology Inc | TIMEPICTRA 2YR SUBSCRIPTION FOR PTP CORE GRAND MASTER (TP 5000), Projected EOL: - Contact for Pricing | 0 | |||
| 999-48632-003 | Microchip Technology Inc | TIMEPICTRA 3YR SUBSCRIPTION FOR CORE SSU/BITS (TH, SSU 2000), Projected EOL: - Contact for Pricing | 0 | |||
| 999-48630-001 | Microchip Technology Inc | TIMEPICTRA 1YR SUBSCRIPTION FOR PRS (TS3XX0, PRS-4X00, 5071A), Projected EOL: - Contact for Pricing | 0 | |||
![]() Bisco Industries | HL48-6-3 | West Coast Aerospace | 2,050 | |||
| SPT-0048-632 | Volt Industrial Plastics | 518 | ||||
| WJ4548-632-A-0 | W.J. Roberts Co Inc | 457 | ||||
| 4548-632-B | RAF Electronic Hardware | 149 | ||||
| 5614-86-31 | Seastrom Mfg | 136 | ||||
| 4863 | Keystone Electronics Corp | 106 | ||||
| 4648-632-SS-20 | RAF Electronic Hardware | 80 | ||||
| AS4863K06 | Allan Aircraft Supply Co LLC | 50 | ||||
| 4548-632-B-5 | RAF Electronic Hardware | 14 | ||||
| 572-4863-01-05-16 | Cambion Electronics Ltd | RoHS : Not Compliant | 8 | |||
| WJ4548-632-B-12 | W.J. Roberts Co Inc | 8 | ||||
| AS4863J03 | Allan Aircraft Supply Co LLC | 6 | ||||
| 94863A201 | HEX HEAD CAP SCREWS | 3 | ||||
| 4648-632-B | RAF Electronic Hardware | 1 | ||||
![]() Rochester Electronics | FAN48630BUC34X | onsemi | 2.5MHz, 1500mA, Synchronous TinyBoost™ Regulator with Bypass Mode RoHS : Compliant |
| 15,000 | |
| NTD4863NT4G | onsemi | Power MOSFET 25V 49A 9.3 mOhm Single N-Channel DPAK RoHS : Compliant |
| 180,925 | ||
| FAN48630UC45X | onsemi | 2.5MHz, 1500mA, Synchronous TinyBoost™ Regulator with Bypass Mode RoHS : Compliant |
| 8,830 | ||
| FAN48630BUC31JX | onsemi | 2.5 MHz, 1500 mA, Synchronous TinyBoost Regulator with Bypass Mode RoHS : Compliant |
| 54,358 | ||
| FAN48632UC35X | onsemi | 2.5 MHz, 2.0 A Pulsed-Load Synchronous TinyBoost™ Regulator with Bypass Mode for GSM PA Supply RoHS : Compliant |
| 240,000 | ||
| FAN48632UC33X | onsemi | 2.5 MHz, 2.0 A Pulsed-Load Synchronous TinyBoost Regulator with Bypass Mode for GSM PA Supply RoHS : Compliant |
| 30,000 | ||
TDA48632GXUMA2![]() | Infineon Technologies AG | AC/DC STANDALONE RoHS : Compliant |
| 2,400 | ||
TDA4863![]() | Infineon Technologies AG | Power Factor Controller, PDIP8 RoHS : Compliant |
| 640 | ||
| FAN48630BUC31JX | Fairchild Semiconductor Corporation | 2.5 MHz, 1500 mA, Synchronous TinyBoost Regulator with Bypass Mode RoHS : Compliant |
| 73,700 | ||
| FAN48630BUC34X | Fairchild Semiconductor Corporation | 2.5MHz, 1500mA, Synchronous TinyBoost™ Regulator with Bypass Mode RoHS : Compliant |
| 2,837,700 | ||
| FAN48630BUC3AJX | Fairchild Semiconductor Corporation | Switching Regulator, Current-mode, 1.5A, 3000kHz Switching Freq-Max RoHS : Compliant |
| 18,000 | ||
| FAN48630UC33X | Fairchild Semiconductor Corporation | 2.5MHz, 1500mA, Synchronous TinyBoost™ Regulator with Bypass Mode RoHS : Compliant |
| 86,694 | ||
| FAN48630UC35X | Fairchild Semiconductor Corporation | 2.5MHz, 1500mA, Synchronous TinyBoost™ Regulator with Bypass Mode RoHS : Compliant |
| 14,515 | ||
| FAN48630UC45X | Fairchild Semiconductor Corporation | 2.5MHz, 1500mA, Synchronous TinyBoost™ Regulator with Bypass Mode RoHS : Compliant |
| 8,473 | ||
| FAN48632BUC33X | Fairchild Semiconductor Corporation | 2.5 MHz, 2.0 A Pulsed-Load Synchronous TinyBoost Regulator with Bypass Mode for GSM PA Supply RoHS : Compliant |
| 122,817 | ||
![]() Sager | 4863 | Keystone Electronics Corp | Standoffs & Spacers .25L 4-40 FORCE FIT |
| 0 | |
| 1424863 | Phoenix Contact | Heavy Duty Power Connectors HC-STA-B48-BWS- EMC-AL RoHS : Compliant |
| 0 | ||
| 348631-000 | TE Connectivity | Multi-Conductor Cables 55A1843-20-MSL4-9CS2275 RoHS : Compliant |
| 0 | ||
| 680486-3 | TE Connectivity | Other Tools HDM 9SMPO055F07OF G | 0 | |||
| 3048632 | Phoenix Contact | DIN Rail Terminal Blocks UK 10,3-CC HESILED N 690 3POL RoHS : Compliant |
| 0 | ||
| 1848639 | Phoenix Contact | Pluggable Terminal Blocks PTS 1 5/12-PH-5 0 CLIP RoHS : Compliant |
| 0 | ||
| 2248631001 | Molex | NEXTSTREAM 8X LE TO RE G6 500MM |
| 0 | ||
| 2-644486-3 | TE Connectivity | Headers & Wire Housings SHROUDED HEADER 3P Straight Post tin RoHS : Compliant |
| 0 | ||
| 0848639001 | Molex | Molex MICRO-CHANGE M12 POWER TAP FM RoHS : Compliant |
| 0 | ||
| 5-1589486-3 | TE Connectivity | TE Connectivity STM025L8CN = SMT CONN | 0 | |||
| 2-5583486-3 | TE Connectivity | Standard Card Edge Connectors CONN TWIN LEAF 28POS 156 C/L | 0 | |||
| 170M4863D | Eaton Bussmann | Specialty Fuses 450A 690V aR DIN 1 HSDNH |
| 0 | ||
| 1204863 | Phoenix Contact | DIN Rail Terminal Blocks LARGE ZAP SPRING ZAP 25-T |
| 0 | ||
| 486395-000 | TE Connectivity | Heat Shrink Cable Boots & End Caps 382A012-25-CS-2065-0 |
| 0 | ||
| 3-644486-3 | TE Connectivity | Headers & Wire Housings 13P MTA100 SHRD HDR ASSY SN RoHS : Compliant | 0 | |||
![]() TME | 4863 | BM Group spa | Nut; M63; polyamide; 75mm; grey; Pitch: 1.5 |
| 20 | |
| 144863 | BBC Cellpack Technology AG | Heat shrink sleeve; glued; 3: 1; 130mm; L: 1000mm; black; SRH3 |
| 4 | ||
| 1748630000 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; socket; OMNIMATE; 10A,10.3A RoHS : Compliant |
| 4 | ||
| 4863 | Keystone Electronics Corp | Spacer sleeve; 6.35mm; Int.thread: UNC4-40; cylindrical; push-in |
| 0 | ||
| 008486 30 000 500 | RECA | Screw; M6; M6x30; Head: cheese head; hex key; HEX 5mm; steel |
| 0 | ||
| 10048638 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; PIN: 6; THT; 3A; 250V; SL 11 |
| 0 | ||
| 2648636 | Gedore Torque Ltd | Wrench: torque; Overall len: 670mm; 10÷120Nm; Socket size: 9x12mm |
| 0 | ||
| 84863 | Delock | Cable; DisplayPort plug,both sides; DisplayPort 1.2; 10m; white |
| 0 | ||
| 10048639 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; PIN: 7; THT; 3A; 250V; SL 11 |
| 0 | ||
| GN 114.8-6-30 | Elesa+Ganter | Locking pin; with locking; stainless steel; Ø: 6mm; 17000N |
| 0 | ||
| 00486 30 000 500 | RECA | Screw; M6; M6x30; Head: countersunk; Phillips; PH3; steel; zinc |
| 0 | ||
| 00114863 | GSR | Tap; M18; 1.5; L: 80mm; Holder: square,hand; 11mm; finishing |
| 0 | ||
| 10048635 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; PIN: 5; THT; 3A; 250V; SL 11 |
| 0 | ||
| 1848639 | Phoenix Contact | Connector: pluggable terminal block; plug; COMBICON S; 10A; 630V RoHS : Compliant |
| 0 | ||
| 10048636 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; PIN: 6; THT; 3A; 250V; SL 11 |
| 0 | ||
![]() ComSIT USA | TDA48632G | Infineon Technologies AG | POWER FACTOR CONTROLLER IC FOR HIGH POWER FACTOR AND LOW THD Power Factor Controller, BIPolar, PDSO8 RoHS : Compliant | 1,810 | ||
| LM4863MTE | National Semiconductor Corporation | Audio Amplifier, 3.2W, 2 Channel(s), 1 Func, PDSO20 RoHS : Not Compliant | 643 | |||
| LM4863MT | National Semiconductor Corporation | DUAL 2.2W AUDIO AMPLIFIER PLUS STEREO HEADPHONE FUNCTION Audio Amplifier, 1.5W, 2 Channel(s), 1 Func, PDSO20 RoHS : Not Compliant | 404 | |||
| MKP1848635704P5 | Wima | METALLIZED POLYPROPYLENE FILM CAPACITOR Film Capacitor, Polypropylene, 700V, 5% +Tol, 5% -Tol, 35uF, Through Hole Mount RoHS : Compliant | 63 | |||
![]() Interstate Connecting Components | 354863-E | TE Connectivity | MICROSTAC 10-PIN VERTICAL SMT RoHS : Compliant |
| 325 | |
| IEG1-34863-15-V | Sensata Circuit Breakers |
| 1 | |||
| 348631-000 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYC55A1843-20-MSL4-9CS227 RoHS : Compliant | 0 | |||
| 3-1658486-3 | TE Connectivity | MSB0.80RC-ASY84DP,GP,30,VCTY RoHS : Compliant |
| 0 | ||
| 10-737486-3AS4 | Amphenol Industrial Operations | ELFIN 3+2 , PLUG 10SQMM | 0 | |||
| 2-644486-3 | TE Connectivity | 03P MTA100 SHRDED HDR ASSY SN RoHS : Compliant |
| 0 | ||
| 5159009486354111LF | Amphenol FCi | DIN PWR MALE RoHS : Compliant |
| 0 | ||
| SA85004863925 | SOURIAU-SUNBANK | 0 | ||||
| ZPF000000000104863 | TE Connectivity | FDBA 50-12-10 SN-K-A6207 RoHS : Compliant | 0 | |||
| 1-2176486-3 | TE Connectivity | BMC 0805 100R 25% A GEN C RoHS : Compliant |
| 0 | ||
| 00160848639 | ITT Interconnect Solutions | 48317-32T39 | 0 | |||
| 2176486-3 | TE Connectivity | BMC 0805 220R 25% A GEN C RoHS : Compliant |
| 0 | ||
| SA85004863932 | SOURIAU-SUNBANK | J3861 | 0 | |||
| CT64863001 | TE Connectivity | 55T9414-12-0/2/5/9-9 RoHS : Compliant | 0 | |||
| PV66848-63 | ITT Interconnect Solutions | PV66848-63 | 0 | |||
![]() NexGen Digital | 4548-632-SS | RAF Electronic Hardware | 24 | |||
![]() PEI Genesis | CA-628486-30807 | Amphenol Corporation |
| 0 | ||
| 73-2734863-1 | SOURIAU-SUNBANK |
| 0 | |||
| 21A00486-322416 | SOURIAU-SUNBANK |
| 0 | |||
| 21A00486-323216 | SOURIAU-SUNBANK |
| 0 | |||
| 21A00486-321616 | SOURIAU-SUNBANK |
| 0 | |||
![]() Powell Electronics | 284863-1 | TE Connectivity | Connectors RoHS : Compliant |
| 76,644 | |
| 5748634-1 | TE Connectivity | D-Sub Connectors RoHS : Compliant |
| 17,338 | ||
| 2-0644486-3 | TE Connectivity | Connectors |
| 924 | ||
| 2-644486-3 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 659 | ||
| 5159009486394AAKLF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 432 | ||
| 748636-1 | TE Connectivity | TE COMPONENT (REF 748636-1) RoHS : Not Compliant |
| 374 | ||
| 172486-3 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 336 | ||
| 814863-000 | TE Connectivity | CABLE-PROT PART (TE REF 814863-000) RoHS : Compliant |
| 26 | ||
848633-001![]() | TE Connectivity | Chem-X Products RoHS : Compliant |
| 12 | ||
| 24863-00 | Honeywell Sensing and Control | Switch |
| 7 | ||
| 44863005 | Hartmann Electronic | AERO RELAY/CONTACTOR 44863005 |
| 2 | ||
| 074863-000 | TE Connectivity | connector accessories RoHS : Not Compliant |
| 1 | ||
![]() Richardson RFPD | 54-863-007 | Spectrum Control | EMI LOW PASS FILTER RoHS : Not Compliant | 0 | ||
| 4248-63.75 | Spectrum Control | Phase Compensated GaAs Switched Programmable Atten RoHS : Compliant | 0 | |||
| 54-863-005 | Spectrum Control | Feed Through Capacitor RoHS : Not Compliant |
| 0 | ||
| 22648630 | HUBER+SUHNER | Conn SMA 0Hz to 18GHz 50Ohm Solder ST Cable Mount RoHS : Compliant |
| 0 | ||
| 48-6-31 | Spectrum Control | High Power Fixed Coaxial Attenuator RoHS : Compliant |
| 0 | ||
| 48-6-33 | Spectrum Control | High Power Fixed Coaxial Attenuator RoHS : Compliant |
| 0 | ||
| SI5340B-D14863-GMR | Skyworks Solutions Inc | Fractional Synthesizer Technology Clock Generators RoHS : Compliant | 0 | |||
| CHA4863-QGG-BOA | United Monolithic Semiconductors | RF MW AMP EVAL BD | 0 | |||
| 4248-63/75 | Spectrum Control | STEP ATTENUATOR RoHS : Compliant | 0 | |||
| SI5340B-D14863-GM | Skyworks Solutions Inc | Fractional Synthesizer Technology Clock Generators RoHS : Compliant | 0 | |||
| 48-6-34 | Spectrum Control | Fixed Coaxial Attenuator 18GHz RoHS : Compliant |
| 0 | ||
| RPA-PB0-486392-1-G-001 | Raltron Electronics Corporation | Antenna Active RoHS : Compliant | 0 | |||
| 48-6-33-LIM | Spectrum Control | FIXED COAX ATTENUATR RoHS : Compliant |
| 0 | ||
![]() Rutronik | C10-737486-3YS3 | Amphenol Interconnect Products Inc | 03P EPOWER PLUG FOR 6,0MM CAB RoHS : Compliant |
| 50 | |
![]() Chip 1 Exchange | 5748634-1 | TE Connectivity | INSTOCK RoHS : Compliant | 36,263 | ||
| 5159009486394AAKLF | Amphenol Corporation | INSTOCK | 1,956 | |||
| 5748636-1 | TE Connectivity | INSTOCK RoHS : Compliant | 1,591 | |||
| XBT48634-01 | SOLEC | INSTOCK | 1,250 | |||
| LM4863MT | INSTOCK | 369 | ||||
| 48634-01 | INSTOCK | 240 | ||||
| NTD4863NT4G | onsemi | INSTOCK RoHS : Compliant | 238 | |||
| 14.86.313 | ETTGR | INSTOCK | 2 | |||
![]() Avnet Abacus | 848633-001![]() | TE Connectivity | Heat Shrink Boot Straight 16 4064 mm Black 385 978 mm (Alt: 848633-001) RoHS : Compliant | 450 | ||
| 1848639 | Phoenix Contact | PTS 1512PH50 CLIP PTS1512PH50CLIP (Alt: 1848639) RoHS : Compliant | 0 | |||
| 1486334 | Phoenix Contact | MCV 15 4G35RN GY MCV154G35RNGY (Alt: 1486334) RoHS : Compliant | 0 | |||
| 1748630000 | Weidmüller Interface GmbH & Co. KG | Conn Terminal Block SKT 34 POS 35mm Crimp ST Cable Mount 10A Box (Alt: 1748630000) RoHS : Compliant | 0 | |||
| 2248631001 | Molex | (Alt: 2248631001) RoHS : Compliant | 0 | |||
| 2-644486-3 | TE Connectivity | Conn Shrouded Header 3 POS 254mm Solder ST Through Hole (Alt: 2-644486-3) RoHS : Compliant | 0 | |||
| 2-644486-3 | TE Connectivity | Conn Shrouded Header 3 POS 254mm Solder ST Through Hole (Alt: 2-644486-3) RoHS : Compliant | 0 | |||
| 2648630000 | Weidmüller Interface GmbH & Co. KG | (Alt: 2648630000) RoHS : Not Compliant | 0 | |||
| 486395-000 | TE Connectivity | (Alt: 486395-000) RoHS : Compliant | 0 | |||
| 486395-000 | TE Connectivity | (Alt: 486395-000) RoHS : Compliant | 0 | |||
| 4-1393486-3 | TE Connectivity | AMP413934863 (Alt: 4-1393486-3) RoHS : Compliant | 0 | |||
| 3-1658486-3 | TE Connectivity | (Alt: 3-1658486-3) RoHS : Compliant | 0 | |||
| MKP1848635704P4 | Vishay Intertechnologies | (Alt: MKP1848635704P4) RoHS : Compliant | 0 | |||
| 5159009486354610 | Amphenol Corporation | DIN41612 Male RA 48P StyleF RoHS : Not Compliant | 0 | |||
| 5159009486354111LF | Amphenol Corporation | Conn DIN 41612 M 48 POS 508mm Solder RA ThruHole Box (Alt: 5159009486354111LF) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 2486390-2 | TE Connectivity | (Alt: 2486390-2) RoHS : Compliant | 0 | ||
| 2486390-8 | TE Connectivity | (Alt: 2486390-8) RoHS : Compliant | 0 | |||
| 2486390-3 | TE Connectivity | (Alt: 2486390-3) RoHS : Compliant | 0 | |||
| 2486390-5 | TE Connectivity | (Alt: 2486390-5) RoHS : Compliant | 0 | |||
| 2486390-1 | TE Connectivity | (Alt: 2486390-1) RoHS : Compliant | 0 | |||
| 2486390-4 | TE Connectivity | (Alt: 2486390-4) RoHS : Compliant | 0 | |||
| 2486390-7 | TE Connectivity | (Alt: 2486390-7) RoHS : Compliant | 0 | |||
| 2486390-6 | TE Connectivity | (Alt: 2486390-6) RoHS : Compliant | 0 | |||
![]() Avnet Silica | SLG4AX48636V | Renesas Electronics Corporation | STQFN14 GreenPAK Linwave (Alt: SLG4AX48636V) RoHS : Compliant | 0 | ||
| FAN48630UC33X | onsemi | 25MHz 1500mA Synchronous TinyBoost Regulator with Bypass Mode (Alt: FAN48630UC33X) RoHS : Compliant | 0 | |||
| FAN48632UC33X | onsemi | (Alt: FAN48632UC33X) RoHS : Compliant | 0 | |||
| FAN48630UC50X | onsemi | 25MHz 1500mA Synchronous TinyBoost Regulator with Bypass Mode (Alt: FAN48630UC50X) RoHS : Compliant | 0 | |||
| FAN48630UC37AX | onsemi | 25MHz 1500mA Synchronous TinyBoost Regulator with Bypass Mode (Alt: FAN48630UC37AX) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | LM4863LQ/NOPB![]() | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,275 | |
| LM4863MTE | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 219 | ||
| 3448-63 | 3M | IN STOCK SHIP TODAY |
| 120 | ||
TDA4863G![]() | Infineon Technologies AG | IN STOCK SHIP TODAY RoHS : Compliant |
| 50 | ||
| 748634-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 24 | ||
TDA4863-2G![]() | Infineon Technologies AG | IN STOCK SHIP TODAY RoHS : Compliant |
| 10 | ||
![]() DB Roberts | BSO4-8632-16 | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Types BSO4 standoffs are for installation into stainless steel sheets as thin as . |
| 17,157 | |
| 4548-632-N | RAF Electronic Hardware | 0 | ||||
| SO4-8632-20 | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Types SO4 standoffs are for installation into stainless steel sheets as thin as .0 | 0 | |||
| 2148-632-SS | RAF Electronic Hardware | STAINLESS STEEL FEMALE STANDOF | 0 | |||
| BSO4-8632-32 | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Types BSO4 standoffs are for installation into stainless steel sheets as thin as . | 0 | |||
| 4548-632-A | RAF Electronic Hardware | 0 | ||||
| 4548-632-AL | RAF Electronic Hardware | 0 | ||||
| 4548-632-B-13 | RAF Electronic Hardware | 0 | ||||
| BSO4-8632-14 | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Types BSO4 standoffs are for installation into stainless steel sheets as thin as . | 0 | |||
| 4048-632-AL-22 | RAF Electronic Hardware | RD M/F SNDOFFS CLR ANODIZ 1/4 RD X 1-3/8 LTH | 0 | |||
| BSO4-8632-26 | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Types BSO4 standoffs are for installation into stainless steel sheets as thin as . | 0 | |||
| 4148-632-A-7 | RAF Electronic Hardware | 0 | ||||
| 4548-632-AL-7 | RAF Electronic Hardware | 0 | ||||
| 4548-632-S-1 | RAF Electronic Hardware | 0 | ||||
| SO4-8632-12 | PennEngineering (PEM) | These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Types SO4 standoffs are for installation into stainless steel sheets as thin as .0 | 0 | |||
![]() EBV Elektronik | FAN48632BUC33X | onsemi | (Alt: FAN48632BUC33X) RoHS : Compliant | 0 | ||
| FAN48630UC37AX | onsemi | 25MHz 1500mA Synchronous TinyBoost Regulator with Bypass Mode (Alt: FAN48630UC37AX) RoHS : Compliant | 0 | |||
| SGM4863YTQG20G/TR | SG Micro Corp | (Alt: SGM4863YTQG20G/TR) RoHS : Compliant | 0 | |||
![]() FDH Electronics | 10148639 | FDH Electronics | Wire and Cable | 4,592 | ||
| BMS1348-6-3-24 | Judd Wire | Wire and Cable | 987 | |||
| NE48636T | FDH Electronics | Wire Management | 500 | |||
![]() Flip Electronics | FAN48630UC315X | onsemi | Stock, Ship Today RoHS : Compliant |
| 30,000 | |
| FAN48630UC33X | onsemi | Stock, Ship Today RoHS : Compliant |
| 30,000 | ||
| FAN48630UC35X | onsemi | Stock, Ship Today RoHS : Compliant |
| 9,000 | ||
| FAN48632UC35X | onsemi | Stock, Ship Today RoHS : Compliant |
| 3,000 | ||
![]() Master Electronics | 2-644486-3 | TE Connectivity | 03P MTA100 SHRDED HDR ASSY SN RoHS : Compliant |
| 999 | |
| 10-737486-3AS4 | Amphenol Commercial | Epower-lite 3WAY Plug For 10. 3 Way Plastic Power Connector RoHS : Compliant |
| 145 | ||
| THT-53-486-3 | Brady Worldwide Inc | Thermal Transfer Printable Labels 2 W X 0.5 H Metallized Poly | Brady THT-53-486-3 RoHS : Compliant |
| 6 | ||
| 1424863 | Phoenix Contact | Panel mounting base B48 - with single locking latch - material: Die-cast aluminum - salt water resistant - height: 39.4 mm - cable gland: none - support sleeve: no - Standard - with flat gasket RoHS : Compliant |
| 3 | ||
| 348631-000 | TE Connectivity | 55A1843-20-MSL4-9CS2275 MOQ Reduction RoHS : Compliant |
| 0 | ||
| 3-1658486-3 | TE Connectivity | Conn Mictor SB Connector RCP 84 POS 0.8mm Solder ST Top Entry SMD Box/Tray MOQ Reduction RoHS : Compliant |
| 0 | ||
| 3048632 | Phoenix Contact | Fuse modular terminal block - fuse type: Glass / ceramics / ... - connection method: Screw connection - cross section: 1.5 mm²- 25 mm² - AWG: 16 - 4 - nominal current: 32 A - nom. voltage: 600 V - width: 54 mm - fuse type: Class CC - mounting type: NS 35/7 5 - NS 35/15 - color: black RoHS : Compliant |
| 0 | ||
| 1848639 | Phoenix Contact | PCB connector - nominal current: 10 A - rated voltage (III/2): 400 V - nominal cross section: 1.5 mm² - number of positions: 12 - pitch: 5 mm - connection method: Push-in spring connection - color: green - contact surface: Tin RoHS : Compliant |
| 0 | ||
| XN-4004-8637-1 | 3M Interconnect | RoHS : Compliant |
| 0 | ||
| 5-1589486-3 | TE Connectivity | STM025L8CN = SMT CONN MOQ Reduction RoHS : Compliant |
| 0 | ||
| 1204863 | Phoenix Contact | Replacement spring - for ZAP 25 and ZAP 100 RoHS : Compliant |
| 0 | ||
| 48636T50 | ITT Interconnect Solutions | Connector Accessories Seal Plug Yellow Thermoplastic RoHS : Compliant |
| 0 | ||
| 486395-000 | TE Connectivity | Heat Shrink Cable Boots & End Caps 382A012-25-CS-2065-0 MOQ Reduction RoHS : Compliant |
| 0 | ||
| 448-6346-000 | ITT Interconnect Solutions | Itt Cannon |Itt Cannon 448-6346-000 RoHS : Compliant |
| 0 | ||
| SFSDT-25-28-G-48.63-D-NUX | Samtec Inc | RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE7486-30 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 26.5 GHz, Nominal Attenuation: 30 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 20 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 30 dB Fixed Attenuator, SMA Male to SMA Female Black Anodized Aluminum Body Rated to 20 Watts Up to 26.5 GHz. PE7486-30 is a fixed 30 dB attenuator from Pasternack. This 30 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. The max input power rating (CW) of this RF attenuator is 20 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with SMA connectors is constructed with black anodized aluminum body material. The connectorized unidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 30 dB fixed attenuator has a gold-plated brass inner conductor. This SMA attenuator has a male gender on side 1 and a SMA female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 30 dB. The Pasternack PE7486-30 attenuator is rated for up to 26.5 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The 30 dB attenuator has a brass connector built with nickel plating. Our fixed RF attenuator PE7486-30 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 30 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 7 | |
| PE3C6486-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.92mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PECX001, RF Cable Type: PE-SR047LL, RF Cable Impedance: 50 Ohm, Length: 36 inches. 2.92mm Male to 2.92mm Male Low Loss Cable 36 Inch Length Using 047 Coax., Radio frequency assembly 2.92mm male to 2.92mm male low loss cable 36 inch length using 047 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. 2.92mm male to 2.92mm male low loss cable 36 inch length using 047 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.92mm to 2.92mm cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with 2.92mm cable connection on one end and 2.92mm cable connection on the other. Our low loss 2.92mm to 2.92mm cable assemblies have a male gender on end 1 and male on end 2. This 2.92mm to 2.92mm cable is a male to male coax assembly, PE3C6486-36, can also be known as a low loss 2.92mm plug to 2.92mm plug cable assembly and will be shipped same-day as it is purchased. 2.92mm plug to 2.92mm plug cable assembly PE3C6486-36 is built with PE-SR047LL which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to 2.92mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 45 GHz maximum frequency 2.92mm male to 2.92mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss 2.92mm plug to 2.92mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.92mm male to 2.92mm male low loss cable 36 inch length using 047 coax. |
| 4 | ||
| PE3W14863 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. N Male to QMA Male Cable Using TFT-5G-402 Coax. PE3W14863 is a N male to QMA male cable using TFT-5G-402 coax. This Pasternack N male to QMA male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm QMA for connector 2. Our male N to male QMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W14863 N male to QMA male cable assembly is constructed with TFT-5G-402 coax. | 0 | |||
| PE3W04863 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402AL, RF Cable Type: PE-SR402AL, RF Cable Impedance: 50 Ohm. TNC Male to SMA Male Cable Using PE-SR402AL Coax. PE3W04863 is a TNC male to SMA male cable using PE-SR402AL coax. This Pasternack TNC male to SMA male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMA for connector 2. Our male TNC to male SMA cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W04863 TNC male to SMA male cable assembly is constructed with PE-SR402AL coax. | 0 | |||
| PE34863LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: Mini UHF, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Mini UHF, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. Mini UHF Female to Mini UHF Male Cable Using RG58 Coax with HeatShrink, LF Solder. PE34863LF/HS is a Mini UHF female to Mini UHF male cable using RG58 coax. This Pasternack Mini UHF female to Mini UHF male cable assembly uses a 50 Ohm Mini UHF for connector 1 and a 50 Ohm Mini UHF for connector 2. Our female Mini UHF to male Mini UHF cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE34863LF/HS Mini UHF female to Mini UHF male cable assembly is constructed with RG58 coax. | 0 | |||
| PE34863LF | Pasternack Enterprises | Key Specifications, Connector Series 1: Mini UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Mini UHF, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE33486-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to SMA Male Cable 36 Inch Length Using RG393 Coax., Radio frequency assembly SMA male to SMA male cable 36 inch length using RG393 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable 36 inch length using RG393 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assembly has male gender on end 1 and male on end 2. PE33486-36 can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PTFE dielectric type. SMA plug to SMA plug cable assembly PE33486-36 is built with RG393 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE33486-36 RF cable are available on our downloadable PDF datasheet. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3W14863LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. N Male to QMA Male Cable Using TFT-5G-402 Coax with HeatShrink, LF Solder. PE3W14863LF/HS is a N male to QMA male cable using TFT-5G-402 coax. This Pasternack N male to QMA male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm QMA for connector 2. Our male N to male QMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W14863LF/HS N male to QMA male cable assembly is constructed with TFT-5G-402 coax. | 0 | |||
| PE3C4486-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMA Female Bulkhead to SSMC Plug Right Angle Cable 36 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly SMA female bulkhead to SSMC plug right angle cable 36 inch length using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female bulkhead to SSMC plug right angle cable 36 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SSMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and right angle SSMC cable connection on the other. Our SMA to right angle SSMC cable assemblies have a female gender on end 1 and plug on end 2. This SMA to SSMC cable is a female to plug coax assembly, PE3C4486-36, can also be known as a SMA jack to right angle SSMC male cable assembly and will be shipped same-day as it is purchased. SMA jack to SSMC male cable assembly PE3C4486-36 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to right angle SSMC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency SMA female bulkhead to SSMC right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4486-36 can also be used in the other direction and will be right angle SSMC plug to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to SSMC right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SSMC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female bulkhead to SSMC plug right angle cable 36 inch length using PE-SR405FLJ coax. |
| 0 | ||
| PE3C4863-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 60 inches. Slide-On BMA Plug Bulkhead to TNC Male Cable 60 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly slide-on BMA plug bulkhead to TNC male cable 60 inch length using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA plug bulkhead to TNC male cable 60 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA bulkhead cable connection on one end and TNC cable connection on the other. Our BMA to TNC cable assemblies have a plug gender on end 1 and male on end 2. This BMA to TNC cable is a plug to male coax assembly, PE3C4863-60, can also be known as a BMA male to TNC plug cable assembly and will be shipped same-day as it is purchased. BMA male to TNC plug cable assembly PE3C4863-60 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable BMA cable assembly is manufactured with BMA to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BMA plug bulkhead to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4863-60 can also be used in the other direction and will be TNC male to BMA plug bulkhead cable assembly if the opposite connectivity is required. BMA male bulkhead to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to TNC cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA plug bulkhead to TNC male cable 60 inch length using PE-SR405FLJ coax. |
| 0 | ||
| PE3C4863-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 24 inches. Slide-On BMA Plug Bulkhead to TNC Male Cable 24 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly slide-on BMA plug bulkhead to TNC male cable 24 inch length using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA plug bulkhead to TNC male cable 24 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA bulkhead cable connection on one end and TNC cable connection on the other. Our BMA to TNC cable assemblies have a plug gender on end 1 and male on end 2. This BMA to TNC cable is a plug to male coax assembly, PE3C4863-24, can also be known as a BMA male to TNC plug cable assembly and will be shipped same-day as it is purchased. BMA male to TNC plug cable assembly PE3C4863-24 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable BMA cable assembly is manufactured with BMA to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BMA plug bulkhead to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4863-24 can also be used in the other direction and will be TNC male to BMA plug bulkhead cable assembly if the opposite connectivity is required. BMA male bulkhead to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to TNC cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA plug bulkhead to TNC male cable 24 inch length using PE-SR405FLJ coax. |
| 0 | ||
| PE3C4863 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. Slide-On BMA Plug Bulkhead to TNC Male Cable Using PE-SR405FLJ Coax., Radio frequency assembly slide-on BMA plug bulkhead to TNC male cable using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA plug bulkhead to TNC male cable using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA bulkhead cable connection on one end and TNC cable connection on the other. Our BMA to TNC cable assemblies have a plug gender on end 1 and male on end 2. This BMA to TNC cable is a plug to male coax assembly, PE3C4863, can also be known as a BMA male to TNC plug cable assembly and will be shipped same-day as it is purchased. BMA male to TNC plug cable assembly PE3C4863 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable BMA cable assembly is manufactured with BMA to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BMA plug bulkhead to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4863 can also be used in the other direction and will be TNC male to BMA plug bulkhead cable assembly if the opposite connectivity is required. BMA male bulkhead to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to TNC cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA plug bulkhead to TNC male cable using PE-SR405FLJ coax. | 0 | |||
| PE3C4863-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 12 inches. Slide-On BMA Plug Bulkhead to TNC Male Cable 12 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly slide-on BMA plug bulkhead to TNC male cable 12 inch length using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA plug bulkhead to TNC male cable 12 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA bulkhead cable connection on one end and TNC cable connection on the other. Our BMA to TNC cable assemblies have a plug gender on end 1 and male on end 2. This BMA to TNC cable is a plug to male coax assembly, PE3C4863-12, can also be known as a BMA male to TNC plug cable assembly and will be shipped same-day as it is purchased. BMA male to TNC plug cable assembly PE3C4863-12 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable BMA cable assembly is manufactured with BMA to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BMA plug bulkhead to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4863-12 can also be used in the other direction and will be TNC male to BMA plug bulkhead cable assembly if the opposite connectivity is required. BMA male bulkhead to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to TNC cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA plug bulkhead to TNC male cable 12 inch length using PE-SR405FLJ coax. |
| 0 | ||
| PE3W24863 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm. SMA Female to BNC Female Bulkhead Cable Using RG188-DS Coax. PE3W24863 is a SMA female to BNC female bulkhead cable using RG188-DS coax. This Pasternack SMA female to BNC female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BNC for connector 2. Our female SMA to female BNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W24863 SMA female to BNC female bulkhead cable assembly is constructed with RG188-DS coax. | 0 | |||
| PE3C4863-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 36 inches. Slide-On BMA Plug Bulkhead to TNC Male Cable 36 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly slide-on BMA plug bulkhead to TNC male cable 36 inch length using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA plug bulkhead to TNC male cable 36 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA bulkhead cable connection on one end and TNC cable connection on the other. Our BMA to TNC cable assemblies have a plug gender on end 1 and male on end 2. This BMA to TNC cable is a plug to male coax assembly, PE3C4863-36, can also be known as a BMA male to TNC plug cable assembly and will be shipped same-day as it is purchased. BMA male to TNC plug cable assembly PE3C4863-36 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable BMA cable assembly is manufactured with BMA to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BMA plug bulkhead to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4863-36 can also be used in the other direction and will be TNC male to BMA plug bulkhead cable assembly if the opposite connectivity is required. BMA male bulkhead to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to TNC cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA plug bulkhead to TNC male cable 36 inch length using PE-SR405FLJ coax. |
| 0 | ||
![]() TE Connectivity | 42486-3 | TE Connectivity | 187 FASTON FLAG REC 20-16 AWG NPST Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 20 – 16 AWG Wire Size: .51 – 1.31 mm² Mating Tab Width: 4.75 mm Receptacle Uninsulated 20 – 16 AWG .51 – 1.31 mm² | Quick Disconnect | Part Number: 42486-3 | Internal Number: 42486-3 | TE Connectivity RoHS : Compliant |
| 28,533 | |
| 2-644486-3 | TE Connectivity | 03P MTA100 SHRDED HDR ASSY SN PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 3 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 3 | Polyester Vertical PCB Header: 2.54Mm & Shrouded & Mta 100 | Part Number: 2-644486-3 | Internal Number: 2-644486-3 | TE Connectivity RoHS : Compliant |
| 2,847 | ||
| 5-146486-3 | TE Connectivity | 06 MODII HDR DRST UNSHRD STKG PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Board-to-Board Board-to-Board Configuration: Mezzanine (Stacking) Number of Positions: 6 PCB Mount Header Vertical Board-to-Board Mezzanine (Stacking) | PCB Header & Receptacle | Part Number: 5-146486-3 | Internal Number: 5-146486-3 | TE Connectivity RoHS : Compliant |
| 2,077 | ||
| 5748634-1 | TE Connectivity | KIT,RCPT,15P,HDP-22,SHLD HDWRE Number of Positions: 15 Connector & Housing Type: Receptacle Connector System: Cable-to-Cable Connector Mounting Type: Panel Mount Connector Shell Size: 1 D-Shaped Connector | 15 Receptacle Cable-to-Cable Panel Mount | Part Number: 5748634-1 | Internal Number: 5748634-1 | TE Connectivity RoHS : Compliant |
| 1,203 | ||
| 5748636-1 | TE Connectivity | KIT,RCPT,44P,HDP-22,SHLD HDWRE Number of Positions: 44 Connector & Housing Type: Receptacle Connector System: Cable-to-Cable Connector Mounting Type: Panel Mount Connector Shell Size: 3 D-Shaped Connector | 44 Receptacle Cable-to-Cable Panel Mount | Part Number: 5748636-1 | Internal Number: 5748636-1 | TE Connectivity RoHS : Compliant |
| 360 | ||
| 208486-3 | TE Connectivity | CMC PLUG ASSEMBLY,SZ 22 Number of Positions: 14 Connector Product Type: Housing Operating Voltage: 600 VDC Wire Size: 30 – 14 AWG Wire Size: .05 – .2 mm² Circular Power Connector | 14 Housing 600 VDC 30 – 14 AWG | Part Number: 208486-3 | Internal Number: 208486-3 | TE Connectivity RoHS : Compliant |
| 128 | ||
![]() Vyrian | LM4863MTEX/NOPB | National Semiconductor Corporation | Audio Amplifier, 3.2W, 2 Channel(s), 1 Func, PDSO20 RoHS : Compliant | 16,445 | ||
| 3048632 | Phoenix Contact | Fuses/Accessories RoHS : Compliant | 13,228 | |||
TDA4863![]() | Infineon Technologies AG | Power Factor Controller, PDIP8 RoHS : Compliant | 12,672 | |||
TDA4863-2![]() | Infineon Technologies AG | Power Factor Controller, BIPolar, PDIP8 RoHS : Compliant | 12,283 | |||
| 5962-01-414-8632 | Analog Devices Inc | D/A Converter, 1 Func, PQCC28 RoHS : Not Compliant | 11,248 | |||
| TMC5748639DTR | Texas Instruments | 9,162 | ||||
| 1848639 | Phoenix Contact | Barrier Strip Terminal Block, 10A, 1.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 8,764 | |||
LM4863MWC![]() | Texas Instruments | Audio Amplifier, 1.5W, 2 Channel(s), 1 Func | 8,560 | |||
LM4863MDC![]() | Texas Instruments | Audio Amplifier, 1.5W, 2 Channel(s), 1 Func | 6,822 | |||
TDA4863XKLA1![]() | Infineon Technologies AG | Power Factor Controller, PDIP8 RoHS : Compliant | 5,339 | |||
| CT148634 | Micron Technology, Inc | 5,322 | ||||
| LM4863M | Texas Instruments | Audio Amplifier, 1.5W, 2 Channel(s), 1 Func, PDSO16 | 4,501 | |||
LM4863LQ![]() | Texas Instruments | Audio Amplifier, 3.2W, 2 Channel(s), 1 Func RoHS : Not Compliant | 4,118 | |||
| LM4863MTEX | National Semiconductor Corporation | Audio Amplifier, 3.2W, 2 Channel(s), 1 Func, PDSO20 RoHS : Not Compliant | 785 | |||
TDA48632GXUMA2![]() | Infineon Technologies AG | Power Factor Controller RoHS : Compliant | 452 | |||
![]() Waytek, Inc. | 148630-91W | General Cable Technologies Corporation | 10GA SXL Red Cross-Link Automotive Wire XLPE -51C to 125C |
| 14,750 | |
![]() Win Source Electronics | TDA4863-2G![]() | Infineon Technologies AG | Power Factor Controller IC for High Power Factor and Low THD RoHS : Compliant |
| 20,000 | |
| FAN48630BUC31JX | onsemi | IC REG BOOST PROG 1.5A 16WLCSP RoHS : Compliant |
| 15,315 | ||
TDA4863G![]() | Infineon Technologies AG | TDA4863 - PFC-DCM (DISCONTINUOUS RoHS : Compliant |
| 5,772 | ||
TDA4863GXUMA2![]() | Infineon Technologies AG | IC PFC CONTROLLER DCM 8DSO RoHS : Compliant |
| 5,260 | ||
| LN4863M | National Semiconductor Corporation |
| 1,200 | |||
| LN4863MTE | National Semiconductor Corporation |
| 700 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |