502-05SC-R Price, Distributor, Stock

Lever-actuated operation creates over-center action and the simple attractive design of this latch incorporates natural tension right into the curved latch-spring mechanism to prevent accidental opening.

97-50-250-21

Southco

C5-0-23971-04

Southco

M0502-25-AL-24

RAF Electronic Hardware

H3-50-203-144

Southco

The swinghandle nests into the housing for minimal protrusion and pops up to swing smoothly for easy latch actuation. Robust die-cast zinc construction provides durable corrosion-resistant performance with optional gasketing for indoor or outdoor use.

E3-1215-0259

Southco

The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic

E5-2-135-021

Southco

These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit

PCF150-28A

Essentra Components

FLANGE PROTECTION DISCPP BLACK

Southco

Southco

Southco

Avdel

AKKU-HANDZANGE FPM50 MIT 35MM-

78230-050225

Avdel

ALIGNMENT SCREW M 3 X 30 FOR B

ECCO

CM111-03-0375-024

ECCO Connectors

5 : $37.4

10-825915-028

Amphenol Industrial Operations

5 : $12.24

065020-0006-MS

ITT Interconnect Solutions

1 : $50.31

065020-0006B

ITT Interconnect Solutions

1 : $77.7

10-708502

Amphenol Industrial Operations

1 : $0.0463

Flip Electronics

NTR4502PT1

onsemi

Stock
RoHS : Not Compliant

568,000

NV25020DTHFT3G

onsemi

Stock, Ship Today
RoHS : Compliant

78,000

NCP502SQ18T2G

onsemi

Stock, Ship Today
RoHS : Compliant

24,823

IDT5P35021-129NDGI

Integrated Device Technology Inc

Stock

11,125

MPF5024AMBA0ES

NXP Semiconductors

Stock
RoHS : Compliant

9,804

NCP502SN36T1G

onsemi

Stock, Ship Today
RoHS : Compliant

3,000

NSV45025T1G

onsemi

Stock, Ship Today
RoHS : Compliant

2,995

B50210B0IMLG

Broadcom Limited

Stock, Ship Today

1,184

HCPL-4502

Broadcom Limited

Stock, Ship Today
RoHS : Not Compliant

950

B50220SB0IFBG

Broadcom Limited

Stock, Ship Today

341

FSB50250A

onsemi

Stock, Ship Today
RoHS : Compliant

270

FSB50250AT

onsemi

Stock, Ship Today
RoHS : Compliant

170

P5020NXN7TNB

NXP Semiconductors

Stock
RoHS : Compliant

PSB30E-1050-27-T

Energy Recovery Products

Stock, Ship Today

P5020NSN7VNB

NXP Semiconductors

Stock, Ship Today
RoHS : Compliant

Pasternack Enterprises US

PE3C6450-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-DB, RF Cable Type: LMR-400-DB, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to SMA Female Low Loss Cable 24 Inch Length Using LMR-400-DB Coax., Radio frequency assembly SMA male to SMA female low loss cable 24 inch length using LMR-400-DB coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA female low loss cable 24 inch length using LMR-400-DB coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. PE3C6450-24 can also be known as a low loss SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3C6450-24 is built with LMR-400-DB which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6450-24 can also be used in the other direction and will be SMA female to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female low loss cable 24 inch length using LMR-400-DB coax.

1 : $145.99
25 : $138.69
50 : $131.39
100 : $125.55

PE34502LF-12

Pasternack Enterprises

Key Specifications, Connector Series 1: SMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-B100, RF Cable Type: PE-B100, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMC Plug to SMC Plug Right Angle Cable 12 Inch Length Using PE-B100 Coax., Radio frequency assembly SMC plug to SMC plug right angle cable 12 inch length using PE-B100 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMC plug to SMC plug right angle cable 12 inch length using PE-B100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMC to SMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMC cable connection on one end and right angle SMC cable connection on the other. Our SMC to right angle SMC cable assemblies have a plug gender on end 1 and plug on end 2. This SMC to SMC cable is a plug to plug coax assembly, PE34502LF-12, can also be known as a SMC male to right angle SMC male cable assembly and will be shipped same-day as it is purchased. SMC male to SMC male cable assembly PE34502LF-12 is built with PE-B100 which is a flexible coax type. The Pasternack flexible SMC cable assembly is manufactured with SMC to right angle SMC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMC plug to SMC right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34502LF-12 can also be used in the other direction and will be right angle SMC plug to SMC plug cable assembly if the opposite connectivity is required. SMC male to SMC right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMC to SMC cable assembly for quick shipment worldwide. Variations of SMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMC plug to SMC plug right angle cable 12 inch length using PE-B100 coax.

1 : $79.99
25 : $75.99
50 : $71.99
100 : $68.79

PE3W11502-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Female Bulkhead to MCX Plug Right Angle Cable 48 Inch Length Using RG316-DS Coax., Radio frequency assembly SMA female bulkhead to MCX plug right angle cable 48 inch length using RG316-DS coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female bulkhead to MCX plug right angle cable 48 inch length using RG316-DS coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to MCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and right angle MCX cable connection on the other. Our SMA to right angle MCX cable assemblies have a female gender on end 1 and plug on end 2. PE3W11502-48 can also be known as a SMA jack to right angle MCX male cable assembly and will be shipped same-day as it is purchased. SMA jack to MCX male cable assembly PE3W11502-48 is built with RG316-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle MCX cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA female bulkhead to MCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W11502-48 can also be used in the other direction and will be right angle MCX plug to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to MCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to MCX cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female bulkhead to MCX plug right angle cable 48 inch length using RG316-DS coax.

1 : $181.99
25 : $172.89
50 : $163.79
100 : $156.51

PE5021

Pasternack Enterprises

1 : $373.99
10 : $359.03
25 : $344.07
100 : $329.11

PE82P5023

Pasternack Enterprises

Key Specifications, Connector In Series: SMA, Connector In Gender: Female, Connector In Impedance: 50 Ohm, Connector Out Series: SMA, Connector Out Gender: Female, Maximum VSWR: 3:1, Maximum Insertion Loss: 12 dB, Maximum Power: 30 Watts. 6 Bit TTL Programmable Phase Shifter, 8 GHz to 12 GHz, 360 degree Phase Range, 5.625 degree Control Step Size, +30 dBm Max Pin, SMA. Pasternack programmable phase shifter PE82P5023 is part of our large selection of in-stock RF, microwave and millimeter wave components available for purchase. This programmable phase shifter is manufactured with SMA connectors and has a phase adjustment of 360 degrees. Our SMA programmable phase shifter has a minimum frequency of 8 GHz and a maximum frequency of 12 GHz. SMA coaxial RF programmable phase shifter has a maximum input power of 30 watts and a maximum VSWR of 3:1. PE82P5023 coaxial SMA programmable phase shifter is one of over 40,000 RF components supplied by Pasternack. Our programmable phase shifter can be bought and shipped worldwide the same-day as with Pasternack's other in-stock RF parts.

1 : $6,400.0
5 : $6,144.0
10 : $5,888.0
25 : $5,632.0

PE3C1150-200CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. MMCX Plug to BNC Female Low Loss Cable 200 cm Length Using LMR-100 Coax., Radio frequency assembly MMCX plug to BNC female low loss cable 200 cm length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The MMCX plug to BNC female low loss cable 200 cm length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMCX to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with MMCX cable connection on one end and BNC cable connection on the other. Our low loss MMCX to BNC cable assemblies have a plug gender on end 1 and female on end 2. PE3C1150-200CM can also be known as a low loss MMCX male to BNC jack cable assembly and will be shipped same-day as it is purchased. MMCX male to BNC jack cable assembly PE3C1150-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible MMCX cable assembly is manufactured with MMCX to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency MMCX plug to BNC female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1150-200CM can also be used in the other direction and will be BNC female to MMCX plug cable assembly if the opposite connectivity is required. Low loss MMCX male to BNC jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMCX to BNC cable assembly for quick shipment worldwide. Variations of MMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MMCX plug to BNC female low loss cable 200 cm length using LMR-100 coax.

1 : $62.99
25 : $59.84
50 : $56.69
100 : $54.17

PE3C5023

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: F, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG62A/U, RF Cable Type: RG62, RF Cable Impedance: 93 Ohm. 50 Ohm N Male to 75 Ohm F Male Cable Using 93 Ohm RG62 Coax., Radio frequency assembly 50 Ohm N male to 75 Ohm F male cable using 93 Ohm RG62 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 50 Ohm N male to 75 Ohm F male cable using 93 Ohm RG62 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type F cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with N type cable connection on one end and type F cable connection on the other. Our type N to F type cable assemblies have a male gender on end 1 and male on end 2. This type N to type F cable is a male to male coax assembly, PE3C5023, can also be known as a type N plug to type F plug cable assembly and will be shipped same-day as it is purchased. N type plug to F type plug cable assembly PE3C5023 is built with RG62 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to type F cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this type N male to F type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5023 can also be used in the other direction and will be type F male to type N male cable assembly if the opposite connectivity is required. Type N plug to type F plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type F cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 50 Ohm N male to 75 Ohm F male cable using 93 Ohm RG62 coax.

PE3C8050-24

Pasternack Enterprises

Key Specifications, Connector Series 1: 2.2-5, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 24 inches. 2.2-5 Male to 4.3-10 Male Low PIM Cable 24 Inch Length Using 1/4 inch Superflexible Coax., Radio frequency assembly 2.2-5 male to 4.3-10 male low PIM cable 24 inch length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 2.2-5 male to 4.3-10 male low PIM cable 24 inch length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.2-5 to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 2.2-5 cable connection on one end and 4.3-10 cable connection on the other. Our low PIM 2.2-5 to 4.3-10 cable assemblies have a male gender on end 1 and male on end 2. This 2.2-5 to 4.3-10 cable is a male to male coax assembly, PE3C8050-24, can also be known as a low PIM 2.2-5 plug to 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. 2.2-5 plug to 4.3-10 plug cable assembly PE3C8050-24 is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 2.2-5 cable assembly is manufactured with 2.2-5 to 4.3-10 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM 2.2-5 male to 4.3-10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8050-24 can also be used in the other direction and will be 4.3-10 male to 2.2-5 male cable assembly if the opposite connectivity is required. Low PIM 2.2-5 plug to 4.3-10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.2-5 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 2.2-5 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.2-5 male to 4.3-10 male low PIM cable 24 inch length using 1/4 inch superflexible coax.

1 : $123.99
25 : $117.79
50 : $111.59
100 : $106.63

PE3W05027

Pasternack Enterprises

Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm. White FAKRA Jack to Reverse Polarity SMA Male Cable Using PE-C100-LSZH Coax. PE3W05027 is a FAKRA jack to reverse polarity SMA male cable using PE-C100-LSZH coax. This Pasternack FAKRA jack to reverse polarity SMA male cable assembly uses a 50 Ohm FAKRA for connector 1 and a 50 Ohm SMA for connector 2. Our jack FAKRA to reverse polarity male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W05027 FAKRA jack to SMA reverse polarity male cable assembly is constructed with PE-C100-LSZH coax.

PE3W16550-200CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. SMB Jack Bulkhead to MCX Plug Right Angle Low Loss Cable 200 CM Length Using LMR-100 Coax., Radio frequency assembly SMB jack bulkhead to MCX plug right angle low loss cable 200 cm length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMB jack bulkhead to MCX plug right angle low loss cable 200 cm length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMB to MCX cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMB bulkhead cable connection on one end and a right angle MCX cable connection on the other. Our low loss SMB to right angle MCX cable assembly has a jack gender on end 1 and a plug on end 2. PE3W16550-200CM can also be known as a low loss SMB female to right angle MCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W16550-200CM RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 60 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our bulkhead SMB jack to right angle MCX plug cable has a maximum VSWR of 1.4:1. SMB female to MCX male cable assembly PE3W16550-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to right angle MCX cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W16550-200CM can also be used in the other direction and will be a right angle MCX plug to SMB jack bulkhead cable assembly if the opposite connectivity is required. Low loss SMB female bulkhead to MCX right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMB to MCX cable assembly for quick shipment worldwide. Variations of SMB and MCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMB to MCX low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $75.99
25 : $72.19
50 : $68.39
100 : $65.35

PE9850/2F-15

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-28, Gain Min: 15, Beam Width, 3dB V: 32.1, Beam Width, 3dB H: 31.3, Frequency, Min: 26.5 GHz, Frequency, Max: 40 GHz. WR-28 Waveguide Standard Gain Horn Antenna Operating From 26.5 GHz to 40 GHz With a Nominal 15 dB Gain 2.92mm Female Input. The PE9850/2F-15 standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-28 input and a waveguide to coaxial transition adapter. Our WR-28 waveguide antenna features a 2.92mm female connector. This single-band directional antenna comes with a flange. Our WR-28 standard gain horn antenna with a 2.92mm female input has a minimum frequency of 26.5 GHz and a maximum frequency of 40 GHz. Pasternack’s PE9850/2F-15 waveguide horn antenna has a typical gain of 15 dB. Our waveguide antenna has a typical vertical beam width of 32.1 degrees and a horizontal beam width of 31.3 degrees at 3 dB. This WR-28 waveguide horn antenna with 15 dB gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this single-band directional antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with a 2.92mm female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements.

1 : $2,000.0
5 : $1,920.0
10 : $1,840.0

PE3C5024/HS-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. MCX Plug Right Angle to SMA Male Low Loss Cable 48 Inch Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly MCX plug right angle to SMA male low loss cable 48 inch length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The MCX plug right angle to SMA male low loss cable 48 inch length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MCX to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with right angle a MCX cable connection on one end and a SMA cable connection on the other. Our low loss right angle a MCX to a SMA cable assembly has plug gender on end 1 and male on end 2. PE3C5024/HS-48 can also be known as a low loss right angle MCX male to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C5024/HS-48 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 60 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. MCX male to SMA plug cable assembly PE3C5024/HS-48 is built with LMR-100A which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with right angle MCX to SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C5024/HS-48 can also be used in the other direction and will be SMA male to right angle MCX plug cable assembly if the opposite connectivity is required. Low loss MCX right angle male to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MCX to SMA cable assembly for quick shipment worldwide. Variations of MCX and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $71.99
25 : $68.39
50 : $64.79
100 : $61.91

PE3W25025

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C400, RF Cable Type: PE-C400, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Female to N Female Bulkhead Cable Using PE-C400 Coax. PE3W25025 is a reverse polarity SMA female to N female bulkhead cable using PE-C400 coax. This Pasternack reverse polarity SMA female to N female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. Our reverse polarity female SMA to female N bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W25025 SMA reverse polarity female to N female bulkhead cable assembly is constructed with PE-C400 coax.

PE3W15029-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: QMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. NEX10 Male to QMA Male Low PIM Cable 24 Inch Length Using 1/4 inch Superflexible Coax., Radio frequency assembly NEX10 male to QMA male low PIM cable 24 inch length using 1/4 inch superflexible coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to QMA male low PIM cable 24 inch length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to QMA cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a QMA cable connection on the other. Our low PIM NEX10 to QMA cable assembly has a male gender on end 1 and a male on end 2. PE3W15029-24 can also be known as a low PIM NEX10 plug to QMA plug cable assembly and will be shipped the same day as it is purchased. This corrugated RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W15029-24 RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has a between series connection. This cable assembly has a typical propagation velocity of 82% and a minimum RF shielding of 120 dB. Our NEX10 male to QMA male cable has a maximum VSWR of 1.4:1. NEX10 plug to QMA plug cable assembly PE3W15029-24 is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to QMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W15029-24 can also be used in the other direction and will be a QMA male to NEX10 male cable assembly if the opposite connectivity is required. Low PIM NEX10 plug to QMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to QMA cable assembly for quick shipment worldwide. Variations of NEX10 and QMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to QMA low PIM RF cable assembly as per your requirements.

1 : $98.99
25 : $94.04
50 : $89.09
100 : $85.13

PE37250-24

Pasternack Enterprises

Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm, Length: 24 inches. SMB Plug to BNC Male Cable 24 Inch Length Using PE-P195 Coax., Radio frequency assembly SMB plug to BNC male cable 24 inch length using PE-P195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMB plug to BNC male cable 24 inch length using PE-P195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMB cable connection on one end and BNC cable connection on the other. Our SMB to BNC cable assemblies have a plug gender on end 1 and male on end 2. This SMB to BNC cable is a plug to male coax assembly, PE37250-24, can also be known as a SMB male to BNC plug cable assembly and will be shipped same-day as it is purchased. SMB male to BNC plug cable assembly PE37250-24 is built with PE-P195 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to BNC cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this SMB plug to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE37250-24 can also be used in the other direction and will be BNC male to SMB plug cable assembly if the opposite connectivity is required. SMB male to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to BNC cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMB plug to BNC male cable 24 inch length using PE-P195 coax.

1 : $61.99
25 : $58.89
50 : $55.79
100 : $53.31

TE Connectivity

1825027-2

TE Connectivity

FSMRA1JH04=R/A,TACT PB SW,160G SPST-NO Contact Current Rating: 50 mA Actuator Style: Round Actuator Operating Function: NO Contact Base Material: Copper Alloy Switch Contact Plating Material: Silver Tactile Switch | 50 mA Round Actuator Copper Alloy | Part Number: 1825027-2 | Internal Number: 1825027-2 | Alias Number: FSMRA1JH | TE Connectivity
RoHS : Compliant

10,000 : $0.24
5,000 : $0.25
2,500 : $0.25
1,000 : $0.26
500 : $0.26
250 : $0.27
100 : $0.27
50 : $0.28
25 : $0.28
10 : $0.29
1 : $0.29

36,010

175150-2

TE Connectivity

AMP UNIVE. POWER CONN TAB CONT Contact Mating Area Plating Material: Tin (Sn) Contact Type: Tab Wire Contact Termination Area Plating Material: Pre-Tin Wire Size: 20 – 16 AWG Operating Voltage: 300 VAC 50 VAC Tin (Sn) Tab Pre-Tin 20 – 16 AWG | Connector Contact | Part Number: 175150-2 | Internal Number: 175150-2 | Alias Number: 0-0175150-2 | TE Connectivity
RoHS : Compliant

1,000 : $0.04
100 : $0.05
10 : $0.07
1 : $0.09

29,974

175024-1

TE Connectivity

250 PL EX REC. 15-10AWG PTBR Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 15 – 10 AWG Wire Size: 1.65 – 5.26 mm² Mating Tab Width: 6.35 mm Receptacle Uninsulated 15 – 10 AWG 1.65 – 5.26 mm² | Quick Disconnect | Part Number: 175024-1 | Internal Number: 175024-1 | TE Connectivity
RoHS : Compliant

1,000 : $0.2
100 : $0.28
10 : $0.33
1 : $0.44

21,709

35022R0FT

TE Connectivity

3502 2R0 1% Resistance Value: 2 Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 1 % Package Size Code: 2010 Surface Mount Resistor | 2 Ω Thick Metal Film Power Resistor 1 % | Part Number: 35022R0FT | Internal Number: 2176397-8 | TE Connectivity
RoHS : Compliant

2,500 : $0.76
1,000 : $0.78
500 : $0.8
250 : $0.82
100 : $0.84
50 : $0.86
25 : $0.89
10 : $0.91
1 : $0.93

9,482

350211RFT

TE Connectivity

3502 11R 1% Resistance Value: 11 Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 1 % Package Size Code: 2010 Surface Mount Resistor | 11 Ω Thick Metal Film Power Resistor 1 % | Part Number: 350211RFT | Internal Number: 2-2176397-6 | TE Connectivity
RoHS : Compliant

2,500 : $0.59
1,000 : $0.61
500 : $0.62
250 : $0.64
100 : $0.66
50 : $0.67
25 : $0.69
10 : $0.7
1 : $0.72

7,898

36502C56NJTDG

TE Connectivity

3650 1008 56nH 5% 2K RL Inductance: .56 µH Inductor Type: High Frequency Current Rating (Max): 1000 mA DC Resistance: .18 Ω Package Size Code: 1008 0.56 µH High Frequency 1000 mA .18 Ω | High Frequency & Rf Inductor | Part Number: 36502C56NJTDG | Internal Number: 1-1879023-2 | TE Connectivity
RoHS : Compliant

1,000 : $0.51
500 : $0.53
250 : $0.54
100 : $0.56
50 : $0.57
25 : $0.59
10 : $0.6
1 : $0.62

4,865

36502C24NJTDG

TE Connectivity

3650 1008 24nH 5% 2K RL Inductance: .024 µH Inductor Type: High Frequency Current Rating (Max): 1000 mA DC Resistance: .13 Ω Package Size Code: 1008 0.024 µH High Frequency 1000 mA .13 Ω | High Frequency & Rf Inductor | Part Number: 36502C24NJTDG | Internal Number: 1879023-7 | TE Connectivity
RoHS : Compliant

1,000 : $0.51
500 : $0.53
250 : $0.54
100 : $0.56
50 : $0.57
25 : $0.59
10 : $0.6
1 : $0.62

3,886

3502560RFT

TE Connectivity

3502 560R 1% Resistance Value: 560 Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 1 % Package Size Code: 2010 Surface Mount Resistor | 560 Ω Thick Metal Film Power Resistor 1 % | Part Number: 3502560RFT | Internal Number: 6-2176397-7 | TE Connectivity
RoHS : Compliant

2,500 : $0.59
1,000 : $0.61
500 : $0.62
250 : $0.64
100 : $0.66
50 : $0.67
25 : $0.69
10 : $0.7
1 : $0.72

3,545

35023K6FT

TE Connectivity

3502 3K6 1% Resistance Value: 3.6K Ω Element Type: Thick Metal Film Resistor Type: Power Resistor Passive Component Tolerance: 1 % Package Size Code: 2010 Surface Mount Resistor | 3.6K Ω Thick Metal Film Power Resistor 1 % | Part Number: 35023K6FT | Internal Number: 8-2176397-6 | TE Connectivity
RoHS : Compliant

2,500 : $0.59
1,000 : $0.61
500 : $0.62
250 : $0.64
100 : $0.66
50 : $0.67
25 : $0.69
10 : $0.7
1 : $0.72

3,438

36502C123JTDG

TE Connectivity

3650 1008 12uH 5% 2K RL Inductance: 12 µH Inductor Type: High Frequency Current Rating (Max): 130 mA DC Resistance: 10.5 Ω Package Size Code: 1008 High Frequency & Rf Inductor | 12 µH High Frequency 130 mA 10.5 Ω | Part Number: 36502C123JTDG | Internal Number: 4-1879023-9 | TE Connectivity
RoHS : Compliant

1,000 : $0.51
500 : $0.53
250 : $0.54
100 : $0.56
50 : $0.57
25 : $0.59
10 : $0.6
1 : $0.62

2,925

1-2842502-0

TE Connectivity

10P TB HDR VT (180) 3.81, GN Number of Positions: 10 Terminal Block Connector Type: Header Connector System: Wire-to-Board Centerline (Pitch): .15 in Centerline (Pitch): 3.81 mm Push-In PCB Terminal Blocks: Time Saving Connector | 10 Header Wire-to-Board .15" | Part Number: 1-2842502-0 | Internal Number: 1-2842502-0 | .15" | TE Connectivity
RoHS : Compliant

10,000 : $1.04
5,000 : $1.06
2,500 : $1.09
1,000 : $1.11
500 : $1.13
250 : $1.15
100 : $1.18
50 : $1.2
25 : $1.22
10 : $1.25
1 : $1.27

1,247

HSA5027KJ

TE Connectivity

HSA50 27K 5% Resistance Value: 27K Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: 1kΩ – 1MΩ Power Resistors: Aluminum Housed & Hsa | 27K Ω Wire Wound 5 % Power Resistor | Part Number: HSA5027KJ | Internal Number: 1-1630186-8 | TE Connectivity
RoHS : Compliant

100 : $8.3
50 : $8.69
25 : $9.09
10 : $9.48
1 : $9.88

230

FCB-205-0224M

TE Connectivity

FCB-205-0224M=M83536/2-024M Relay & Contactor Type: General Purpose Power Relay Current Type: DC Coil Magnetic System: Polarized, Monostable Contact Arrangement: 2 Form C DPDT-CO Contact Current Rating: 5 A General Purpose Power Relay DC Polarized, Monostable 2 Form C DPDT-CO | Electromechanical Relay | Part Number: FCB-205-0224M | Internal Number: 5-1617758-0 | TE Connectivity
RoHS : Compliant

1 : $292.4

223

HSA502R0J

TE Connectivity

HSA50 2R0 5% Resistance Value: 2 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistors: Aluminum Housed & Hsa | 2 Ω Wire Wound 5 % Power Resistor | Part Number: HSA502R0J | Internal Number: 4-1625984-2 | TE Connectivity
RoHS : Compliant

100 : $7.98
50 : $8.36
25 : $8.74
10 : $9.12
1 : $9.5

HSHC35027RJ

TE Connectivity

HSHC350 27R 5% Resistance Value: 27 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Power Resistors: Aluminium Housed & Hsc | 27 Ω Wire Wound 5 % Power Resistor | Part Number: HSHC35027RJ | Internal Number: 1-2176733-8 | TE Connectivity
RoHS : Compliant

1 : $214.6

Teledyne HiRel

5962-8751502JA

Teledyne HiRel

PROM, UV ERASABLE, 8K X 8, 55 NS ACCESS TIME
RoHS : Not Compliant

5962-8981502KA

Teledyne HiRel

PROM, UV ERASABLE, 2K X 8, REGISTERED, 25 NS ACCESS TIME
RoHS : Not Compliant

5962-9071502MYA

Teledyne HiRel

FIFO MEMORY, 4K X 9, 80 NS ACCESS TIME
RoHS : Not Compliant

5962-9071502MXA

Teledyne HiRel

FIFO MEMORY, 4K X 9, 80 NS ACCESS TIME
RoHS : Not Compliant

5962-9158502MZA

Teledyne HiRel

FIFO MEMORY, 1K X 9 PARALLEL, 80 NS ACCESS TIME
RoHS : Not Compliant

5962-90555023A

Teledyne HiRel

PROG. LOGIC DEVICE, ASYNCHRONOUS, 25 NS
RoHS : Not Compliant

5962-87515023A

Teledyne HiRel

PROM, UV ERASABLE, 8K X 8, 55 NS ACCESS TIME
RoHS : Not Compliant

5962-8873502LA

Teledyne HiRel

PROM, ONE TIME, 2K X 8, REGISTERED, 35 NS ACCESS TIME
RoHS : Not Compliant

5962-9055502KA

Teledyne HiRel

PROG. LOGIC DEVICE, ASYNCHRONOUS, 25 NS
RoHS : Not Compliant

5962-9055502LA

Teledyne HiRel

PROG. LOGIC DEVICE, ASYNCHRONOUS, 25 NS
RoHS : Not Compliant

5962-8751502LC

Teledyne HiRel

PROM, UV ERASABLE, 8K X 8, 55 NS ACCESS TIME

5962-87515023C

Teledyne HiRel

PROM, UV ERASABLE, 8K X 8, 55 NS ACCESS TIME

5962-89815023A

Teledyne HiRel

PROM, UV ERASABLE, 2K X 8, REGISTERED, 25 NS ACCESS TIME
RoHS : Not Compliant

5962-9206502MYA

Teledyne HiRel

PROM, 64K X 8, REGISTERED, 55 NS ACCESS TIME
RoHS : Not Compliant

5962-8680502XA

Teledyne HiRel

PROM, UV ERASABLE, 64K X 16, 250 NS ACCESS TIME
RoHS : Not Compliant

Venkel Ltd.

C0402X7R250-223JNP

VENKEL LTD

Chip Capacitor;0402;X7R;25V;0.022uF;�5%
RoHS : Compliant

10,000

C01005HQN250-200GNP

VENKEL LTD

High-Q NP0 Capacitor;01005;HQN;25V;20pF;�2%
RoHS : Compliant

C0402C0G250-201JNE

VENKEL LTD

Chip Capacitor;0402;C0G;25V;200pF;�5%
RoHS : Compliant

C0402HQN250-220GNP

VENKEL LTD

High-Q NP0 Capacitor;0402;HQN;25V;22pF;�2%
RoHS : Compliant

C0402X7R250-223KNE

VENKEL LTD

Chip Capacitor;0402;X7R;25V;0.022uF;�10%
RoHS : Compliant

C0603HQN250-240FNP

VENKEL LTD

High-Q NP0 Capacitor;0603;HQN;25V;24pF;�1%
RoHS : Compliant

C0603HQN250-2R4BNP

VENKEL LTD

High-Q NP0 Capacitor;0603;HQN;25V;2.4pF;�0.1pF
RoHS : Compliant

C1808C0G502-2R7CNE

VENKEL LTD

HV Chip Capacitor;1808;C0G;5000V;2.7pF;�0.25pF
RoHS : Compliant

C0603X7R250-222MNE

VENKEL LTD

Chip Capacitor;0603;X7R;25V;2200pF;�20%
RoHS : Compliant

C0805C0G250-223KNE

VENKEL LTD

Chip Capacitor;0805;C0G;25V;0.022uF;�10%
RoHS : Compliant

MELFC0102-YZ-1502BT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/3W;�15PPM;15K;�0.1%
RoHS : Compliant

MELFC0204-TZ-7502BT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�15PPM;75K;�0.1%
RoHS : Compliant

MELFC0204-ZC-7502CT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�50PPM;75K;�0.25%
RoHS : Compliant

MELFM0207-VC-7502BT

VENKEL LTD

MELF Molded Thin Film CR;0207;1/2W;�50PPM;75K;�0.1%
RoHS : Not Compliant

MELFM0207-XE-1502DT

VENKEL LTD

MELF Molded Thin Film CR;0207;1W;�25PPM;15K;�0.5%
RoHS : Not Compliant

Wuhan P&S

MJ15025G

onsemi

Silicon Power Transistors
RoHS : Compliant

1 : $11.34
100 : $7.24
500 : $5.97
1,000 : $5.49

7,400

10145028-030LF

Amphenol FCi

Wire-to-board connector, socket, 30 positions, left and right double row

1 : $5.58
100 : $2.24
500 : $2.07
1,000 : $2.01

5,000

NTCS0805E3502JLT

Vishay Intertechnologies

NTC thermistor 5k 0805 (2012 metric)
RoHS : Compliant

1 : $1.01
100 : $0.34
500 : $0.31
1,000 : $0.31

4,000

UJ4C075023B7S

onsemi

Silicon Carbide (SiC) Cascode JFET
RoHS : Compliant

1 : $30.75
100 : $19.63
500 : $16.19
1,000 : $14.88

2,400

10025026-10002TLF

Amphenol FCi

PCI Express : x8 Straddle-Mount Card Edge Connector, 98 Positions, 1 mm (0.039 in.) P
RoHS : Compliant

1 : $3.68
100 : $3.51
500 : $3.07
1,000 : $2.96

1,200

502-05SC-R Distributor

Link URL