535ZG10ZS-RV Price, Distributor, Stock

LED mid-power; SMD; 3535 PLCC2; UV-A; UV-C; UV-A:395-405nm; UV-C:270-280nm; UV-A:40-50mW/60mA; UV-C:20mW/150mA; UV-A:3.0-4.0V; UV-C:5.0-7.5V; water clear; 120 degrees; 3.5x3.5x1.4mm

1,000 : $5.431
500 : $6.205
100 : $6.594
50 : $6.981
10 : $7.37
1 : $7.757

PI4IOE5V9535ZDEX

Diodes Incorporated

Integrated Circuit ;Interface; I/O Expander; I2C,SMBus; Ch:16; 2.3V-5.5V; -40+85 deg.C; SMD; TQFN24
RoHS : Compliant

3,000 : $0.944
1,000 : $1.069
100 : $1.135
25 : $1.199
1 : $1.26

U3535C2VGE20

Sunpu Opto

LED mid-power; SMD; 3535 PLCC2; UV-C; 270-280nm; 10mW/60mA; 5.0-6.5V; water clear; 45 degrees; 3.5x3.5x2.9mm

500 : $3.227
250 : $3.688
100 : $3.919
50 : $4.148
10 : $4.377
1 : $4.609

U3535C2VGB30

Sunpu Opto

LED mid-power; SMD; 3535 PLCC2; UV-C; 270-280nm; 20mW/150mA; 5.0-6.5V; water clear; 120 degrees; 3.5x3.5x1.6mm

1,000 : $5.276
500 : $6.029
100 : $6.406
50 : $6.782
10 : $7.159
1 : $7.536

U3535C2VGE10

Sunpu Opto

LED mid-power; SMD; 3535 PLCC2; UV-C; 270-280nm; 4.5mW/30mA; 5.0-7.5V; water clear; 45 degrees; 3.5x3.5x2.9mm

500 : $2.255
250 : $2.575
100 : $2.736
50 : $2.899
10 : $3.059
1 : $3.219

Pasternack Enterprises US

PE3C5535/HS-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: FME, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. FME Jack to SMA Male Right Angle Low Loss Cable 48 Inch Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly FME jack to SMA male right angle low loss cable 48 inch length using LMR-195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The FME jack to SMA male right angle low loss cable 48 inch length using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom FME to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a FME cable connection on one end and a right angle SMA cable connection on the other. Our low loss FME to right angle SMA cable assembly has a jack gender on end 1 and a male on end 2. PE3C5535/HS-48 can also be known as a low loss FME female to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C5535/HS-48 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. FME female to SMA plug cable assembly PE3C5535/HS-48 is built with LMR-195 which is a flexible coax type. The Pasternack flexible FME cable assembly is manufactured with FME to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C5535/HS-48 can also be used in the other direction and will be a right angle SMA male to FME jack cable assembly if the opposite connectivity is required. Low loss FME female to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality FME to SMA cable assembly for quick shipment worldwide. Variations of FME and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal FME to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $74.89
25 : $71.15
50 : $67.4
100 : $64.41

384

PE35353

Pasternack Enterprises

354

PE35356-48

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm, Length: 48 inches. 75 Ohm TNC Male to 75 Ohm TNC Male Cable 48 Inch Length Using 75 Ohm RG59 Coax., Radio frequency assembly 75 Ohm TNC male to 75 Ohm TNC male cable 48 inch length using 75 Ohm RG59 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm TNC male to 75 Ohm TNC male cable 48 inch length using 75 Ohm RG59 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and TNC cable connection on the other. Our TNC to TNC cable assemblies have a male gender on end 1 and male on end 2. This TNC to TNC cable is a male to male coax assembly, PE35356-48, can also be known as a TNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE35356-48 is built with RG59 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this TNC male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. TNC plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm TNC male to 75 Ohm TNC male cable 48 inch length using 75 Ohm RG59 coax.

1 : $87.79
25 : $83.4
50 : $79.01
100 : $75.5

108

PE35353-36

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Thread, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Reverse Thread, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length: 36 inches. Reverse Thread SMA Male to Reverse Thread SMA Male Cable 36 Inch Length Using RG142 Coax., Radio frequency assembly reverse thread SMA male to reverse thread SMA male cable 36 inch length using RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Reverse thread SMA male to reverse thread SMA male cable 36 inch length using RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with reverse thread SMA cable connection on one end and reverse thread SMA cable connection on the other. Our reverse thread SMA to reverse thread SMA cable assemblies have a male gender on end 1 and male on end 2. This reverse thread SMA to reverse thread SMA cable is a male to male coax assembly, PE35353-36, can also be known as a reverse thread SMA plug to reverse thread SMA plug cable assembly and will be shipped same-day as it is purchased. Reverse thread SMA plug to reverse thread SMA plug cable assembly PE35353-36 is built with RG142 which is a flexible coax type. The Pasternack flexible reverse thread SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this reverse thread SMA male to reverse thread SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA reverse thread plug to SMA reverse thread plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse thread SMA male to reverse thread SMA male cable 36 inch length using RG142 coax.

1 : $113.99
25 : $108.29
50 : $102.59
100 : $98.03

PE3FCA535-10M

Pasternack Enterprises

Key Specifications, Mode: Multimode, Multimode Class: OM4, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: ST, Connector 1 Polish Type: UPC, Connector 2 Series: ST, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNP, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 300, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 0 deg C, Min Operating Temperature: 60 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Duplex ST UPC to ST UPC, MM OM4, 2.0mm Plenum, Aqua-10M. Pasternack’s PE3FCA535-10M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long duplex cable assembly is equipped with ST/UPC to ST/UPC connectors. Our aqua blue fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 60 to 0 degrees C, this cable provides reliable performance across diverse conditions. As an OM4 fiber optic jumper, Pasternack’s PE3FCA535-10M is designed for ultra-high-speed, high-bandwidth data transmission, supporting greater distances and faster speeds than OM1 and OM3 fiber.The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA535-10M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. This PE3FCA535-10M fiber optic cable with a 2 mm cable diameter and 30 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of dual ST/UPC to dual ST/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM4 multimode fiber optic cable that meets your requirements.

1 : $36.49
5 : $35.03
10 : $33.57
25 : $32.11

PE3C5356

Pasternack Enterprises

Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. QMA Male Right Angle to SMA Female Cable Using RG58 Coax., Radio frequency assembly QMA male right angle to SMA female cable using RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. QMA male right angle to SMA female cable using RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle QMA cable connection on one end and SMA cable connection on the other. Our right angle QMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This QMA to SMA cable is a male to female coax assembly, PE3C5356, can also be known as a right angle QMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. QMA plug to SMA jack cable assembly PE3C5356 is built with RG58 which is a flexible coax type. The Pasternack flexible QMA cable assembly is manufactured with right angle QMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5 GHz maximum frequency QMA right angle male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5356 can also be used in the other direction and will be SMA female to right angle QMA male cable assembly if the opposite connectivity is required. QMA right angle plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QMA to SMA cable assembly for quick shipment worldwide. Variations of QMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this QMA male right angle to SMA female cable using RG58 coax.

PE3C6535

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C400, RF Cable Type: PE-C400, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Male to Reverse Polarity TNC Female Cable Using PE-C400 Coax., Radio frequency assembly reverse polarity TNC male to reverse polarity TNC female cable using PE-C400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Reverse polarity TNC male to reverse polarity TNC female cable using PE-C400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with reverse polarity TNC cable connection on one end and reverse polarity TNC cable connection on the other. Our reverse polarity TNC to reverse polarity TNC cable assemblies have a male gender on end 1 and female on end 2. This reverse polarity TNC to reverse polarity TNC cable is a male to female coax assembly, PE3C6535, can also be known as a reverse polarity TNC plug to reverse polarity TNC jack cable assembly and will be shipped same-day as it is purchased. Reverse polarity TNC plug to reverse polarity TNC jack cable assembly PE3C6535 is built with PE-C400 which is a flexible coax type. The Pasternack flexible reverse polarity TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency reverse polarity TNC male to reverse polarity TNC female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6535 can also be used in the other direction and will be reverse polarity TNC female to reverse polarity TNC male cable assembly if the opposite connectivity is required. TNC reverse polarity plug to TNC reverse polarity jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity TNC male to reverse polarity TNC female cable using PE-C400 coax.

PE3C7853-50CM

Pasternack Enterprises

Key Specifications, Connector Series 1: NEX10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: NEX10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. NEX10 Male Right Angle to NEX10 Male Right Angle Low PIM Cable 50 Cm Length Using 1/4 inch Superflexible Coax., Radio frequency assembly NEX10 male right angle to NEX10 male right angle low PIM cable 50 cm length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. NEX10 male right angle to NEX10 male right angle low PIM cable 50 cm length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom NEX10 to NEX10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle NEX10 cable connection on one end and right angle NEX10 cable connection on the other. Our low PIM right angle NEX10 to right angle NEX10 cable assemblies have a male gender on end 1 and male on end 2. This NEX10 to NEX10 cable is a male to male coax assembly, PE3C7853-50CM, can also be known as a low PIM right angle NEX10 plug to right angle NEX10 plug cable assembly and will be shipped same-day as it is purchased. NEX10 plug to NEX10 plug cable assembly PE3C7853-50CM is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with right angle NEX10 to right angle NEX10 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM NEX10 right angle male to NEX10 right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM NEX10 right angle plug to NEX10 right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this NEX10 male right angle to NEX10 male right angle low PIM cable 50 cm length using 1/4 inch superflexible coax.

1 : $139.99
25 : $132.99
50 : $125.99
100 : $120.39

PE3W00535

Pasternack Enterprises

Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 3.5mm, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm. 3.5mm Female to 3.5mm Female Cable Using PE-SR402F. PE3W00535 is a 3.5mm female to 3.5mm female cable using PE-SR402FLJ coax. This Pasternack 3.5mm female to 3.5mm female cable assembly uses a 50 Ohm 3.5mm for connector 1 and a 50 Ohm 3.5mm for connector 2. Our female 3.5mm to female 3.5mm cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W00535 3.5mm female to 3.5mm female cable assembly is constructed with PE-SR402FLJ coax.

PE3W06535/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG55B/U, RF Cable Type: RG55, RF Cable Impedance: 53 Ohm. SMB Plug Right Angle to SMA Male Right Angle Cable Using 53 Ohm RG55 Coax with HeatShrink. PE3W06535/HS is a SMB plug right angle to SMA male right angle cable using RG55 coax. This Pasternack SMB plug right angle to SMA male right angle cable assembly uses a 50 Ohm SMB for connector 1 and a 50 Ohm SMA for connector 2. SMB right angle to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug SMB right angle to male SMA right angle cable assembly uses a flexible cable type that is 53 Ohm. Pasternack PE3W06535/HS SMB plug right angle to SMA male right angle cable assembly is constructed with RG55 coax.

PE7535-40

Pasternack Enterprises

Key Specifications, Design: Continuously Variable, Maximum Frequency: 12.4 GHz, Impedance: 50 Ohm, Power Maximum: 5 Watt, VSWR Maximum: 1.5:1, Connector Series 1: SMA, Connector Gender 1: Female, Connector Series 2: SMA, Connector Gender 2: Female, Minimum Attenuation: 0 dB, Maximum Attenuation: 40 dB, Step Type: Dial. 0 to 40 dB Variable Attenuator, SMA Female to SMA Female Rated to 5 Watts from 4 GHz to 12.4 GHz. PE7535-40 is a continuously variable attenuator from Pasternack. Our coaxial adjustable attenuator has an impedance of 50 Ohm and is precision manufactured to RF and microwave industry specifications. This RF variable attenuator comes with a maximum insertion loss of 0.5 dB. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7535-40 variable RF attenuator has a SMA female connector configuration and a rotary dial for continuous attenuation level adjustment. Our PE7535-40 variable attenuator has a maximum attenuation of 40 dB. This microwave RF variable attenuator has a frequency range of 7 GHz to 12.4 GHz and a maximum VSWR of 1.5:1. Our continuously variable attenuator is rated to 5 Watts (CW) at the stated attenuation. Our continuously variable attenuator has an overall length of 2 inches, a width of 1.25 inches, and weighs 0.02 lbs. This radio frequency continuously variable attenuator with SMA connectors is built with aluminum. Additional dimensions and specifications for this 40 dB variable attenuator are on our downloadable PDF datasheet above. Our variable attenuator PE7535-40 is shipped the same business day as purchased from Pasternack’s facility. This attenuator is part of our RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF variable attenuator as per your requirements.

1 : $2,250.0
5 : $2,205.0
10 : $2,160.0
25 : $2,115.0

PE35359LF-36

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Reverse Thread, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMA Male to Reverse Thread SMA Male Cable 36 Inch Length Using RG174 Coax, RoHS., Radio frequency assembly SMA male to reverse thread SMA male cable 36 inch length using RG174 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to reverse thread SMA male cable 36 inch length using RG174 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and reverse thread SMA cable connection on the other. Our SMA to reverse thread SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to reverse thread SMA cable is a male to male coax assembly, PE35359LF-36, can also be known as a SMA plug to reverse thread SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to reverse thread SMA plug cable assembly PE35359LF-36 is built with RG174 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to reverse thread SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE35359LF-36 can also be used in the other direction and will be reverse thread SMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA reverse thread plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to reverse thread SMA male cable 36 inch length using RG174 coax, RoHS.

1 : $68.49
25 : $65.07
50 : $61.64
100 : $58.9

PE35359

Pasternack Enterprises

PE3W05353-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: FAKRA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Plastic, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Water Blue FAKRA Jack to MCX Plug Low Loss Cable 48 Inch Length Using LMR-100 Coax., Radio frequency assembly water blue FAKRA jack to MCX plug low loss cable 48 inch length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Water blue FAKRA jack to MCX plug low loss cable 48 inch length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FAKRA to MCX cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with FAKRA cable connection on one end and MCX cable connection on the other. Our low loss FAKRA to MCX cable assemblies have a jack gender on end 1 and plug on end 2. PE3W05353-48 can also be known as a low loss FAKRA female to MCX male cable assembly and will be shipped same-day as it is purchased. FAKRA female to MCX male cable assembly PE3W05353-48 is built with LMR-100A which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to MCX cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency FAKRA jack to MCX plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W05353-48 can also be used in the other direction and will be MCX plug to FAKRA jack cable assembly if the opposite connectivity is required. Low loss FAKRA female to MCX male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FAKRA to MCX cable assembly for quick shipment worldwide. Variations of FAKRA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this water blue FAKRA jack to MCX plug low loss cable 48 inch length using LMR-100 coax.

1 : $54.59
25 : $51.86
50 : $49.13
100 : $46.95

PE3W24535

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG55B/U, RF Cable Type: RG55, RF Cable Impedance: 53 Ohm. N Female Bulkhead to QMA Male Right Angle Cable Using 53 Ohm RG55 Coax. PE3W24535 is a N female bulkhead to QMA male right angle cable using RG55 coax. This Pasternack N female bulkhead to QMA male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm QMA for connector 2. N to QMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female N bulkhead to male QMA right angle cable assembly uses a flexible cable type that is 53 Ohm. Pasternack PE3W24535 N female bulkhead to QMA male right angle cable assembly is constructed with RG55 coax.

Vyrian

MDRR-DT-25-35-U

Littelfuse Inc

Dry Reed Switch, Change-Over, 0.25A, 175VDC, Through Hole-straight
RoHS : Compliant

12,279

585-5356

Dialight

Single Color LED Display Cluster, Green, 10.92mm
RoHS : Not Compliant

11,306

BCM5352EKPBG

Broadcom Limited

9,639

MT5LC2565-35IT

Micron Technology Inc

Standard SRAM, 64KX4, 35ns, CMOS, PDIP28
RoHS : Not Compliant

6,074

MT5C2565-35LAT

Micron Technology Inc

Standard SRAM, 64KX4, 35ns, CMOS, PDIP28
RoHS : Not Compliant

5,781

4-5353512-5

TE Connectivity

Board Connector, 40 Contact(s), 2 Row(s), Female, Straight, 0.0197 inch Pitch, Surface Mount Terminal, Black Insulator
RoHS : Compliant

4,929

1-535542-9

TE Connectivity

Board Connector, 38 Contact(s), 2 Row(s), Female, Straight, Solder Terminal, Black Insulator, Receptacle
RoHS : Not Compliant

4,171

MT52C9005-35IT

Micron Technology Inc

FIFO, 512X9, 35ns, Asynchronous, CMOS, PDIP28
RoHS : Not Compliant

3,782

MT5LC1005-35LPIT

Micron Technology Inc

Standard SRAM, 256KX4, 35ns, CMOS, PDIP28
RoHS : Not Compliant

2,821

MT5LC2565-35LAT

Micron Technology Inc

Standard SRAM, 64KX4, 35ns, CMOS, PDIP28
RoHS : Not Compliant

2,388

M3253507E2B225KRTB

KYOCERA AVX

Ceramic Capacitor, Multilayer, Ceramic, 100V, 10% +Tol, 10% -Tol, X7R, 15% TC, 2.2uF, Surface Mount, 1812

2,329

M3253505E2Z225KRTB

KEMET Corporation

Ceramic Capacitor, Multilayer, Ceramic, 25V, 10% +Tol, 10% -Tol, X7R, 15% TC, 2.2uF, Surface Mount, 1206

712

S1W0-3535407003-00000000-00001

Seoul Semiconductor

Single Color LED
RoHS : Compliant

653

M3253503E1A470FZMB

KEMET Corporation

Ceramic Capacitor, Multilayer, Ceramic, 50V, 1% +Tol, 1% -Tol, C0G, 30ppm/Cel TC, 0.000047uF, Surface Mount, 0603

511

2298535

Phoenix Contact

Interconnection Device
RoHS : Compliant

216

Waytek, Inc.

15355128

Aptiv PLC

2 Way TPA GT 150 DELPHI 15355128
RoHS : Compliant

100 : $0.1279
200 : $0.1181
500 : $0.1054
1,000 : $0.0918
5,000 : $0.0876

14,219

15358785

Aptiv PLC

16 Way Purple GT 150 TPA Lock

20 : $0.2164
50 : $0.1934
100 : $0.1762
200 : $0.1704
500 : $0.1647
1,000 : $0.1589

7,170

25-358

Pollak

Pollak 25-358 boot nut assembly is a black neoprene boot cover for compatible Pollak push-button switches. It features a 5/8"-32 thread, dustproof and weatherproof rubber construction, and a boot-nut design for protecting switch actuators in exposed panels.

5 : $4.3179
50 : $3.6152
100 : $3.1356
200 : $2.9641
500 : $2.827

1,254

145354-91

General Cable Technologies Corporation

8GA GXL Orange Cross-Link Automotive Wire XLPE -51C to 125C

250 : $1.1717
500 : $0.9559
1,500 : $0.6895

1,250

25-352

Pollak

Pollak 25-352 boot nut assembly is a red neoprene boot cover for compatible Pollak push-button switches. It features a 5/8"-32 thread, dustproof and weatherproof rubber construction, and a boot-nut design for protecting switch actuators in exposed panels.

4 : $5.3434
50 : $4.474
100 : $3.9017
200 : $3.647
500 : $3.4988

330

25535-B-2

Eaton Electronics

35 AMP Manual Reset Mid Range Panel Mount Circuit Breaker PUSH TO TRIP

1 : $29.68
5 : $26.56
10 : $24.81
50 : $23.31
100 : $22.23
200 : $21.28

15359996

Aptiv PLC

The Aptiv 15359996 is a professional hand crimping tool designed for terminating GT 150 (1.5 mm) sealed terminals in automotive and harsh-environment applications. Compatible with 2216 Ga. wire, it features a ratcheting mechanism to ensure full-cycle, consistent crimps for reliable electrical and mechanical performance.

1 : $177.87
10 : $166.91

8530-1535B

Egis Mobile Electric

XD Flex L Triple - (Relay/VSR/Relay)-Flying Wires

1 : $384.318
5 : $368.79
10 : $353.262
25 : $322.206

5350-557-000P

QuickCable Corporation

Lead Battery Terminal Military Positive MS75004-1 A52425-1 SEE ALSO 36111

1 : $15.82
50 : $13.16
100 : $12.35
200 : $11.61
500 : $11.09

Win Source Electronics

PBSS5350Z135

Nexperia

805 : $0.3728
645 : $0.3879
500 : $0.4031
350 : $0.4334
225 : $0.4485
105 : $0.4788

324,100

1N5359BRLG

onsemi

DIODE ZENER 24V 5W AXIAL
RoHS : Compliant

1,560 : $0.1928
1,165 : $0.2151
900 : $0.2225
655 : $0.2299
425 : $0.2373
175 : $0.2892

300,000

DG2535EDQ-T1-GE3

Vishay Huntington

IC ANALOG SWITCH DUAL 10MSOP

430 : $0.7904
320 : $0.8816
250 : $0.912
180 : $0.9424
120 : $0.9728
50 : $1.1855

82,110

PCA9535PWRG4

Texas Instruments

SMBus Low-Power I/O Expander
RoHS : Compliant

460 : $0.6573
370 : $0.684
285 : $0.7107
200 : $0.7642
130 : $0.7909
60 : $0.8443

38,370

PIC16F15354T-I/SS

Microchip Technology Inc

IC MCU 8BIT 7KB FLASH 28SSOP
RoHS : Compliant

164 : $2.0562
131 : $2.1398
101 : $2.2233
71 : $2.3905
46 : $2.4741
22 : $2.6413

30,000

TCA9535RTWR

Texas Instruments

IC I/O EXPANDER I2C 16B 24WQFN / I2C/SMBus Interface 100kHz/400kHz 5.5V 24-Pin WQFN EP T/R
RoHS : Compliant

460 : $0.6523
370 : $0.6788
285 : $0.7054
200 : $0.7584
130 : $0.7849
60 : $0.8379

27,880

FDC3535-NL

Fairchild Semiconductor Corporation

102 : $2.9546
76 : $3.2955
59 : $3.4091
43 : $3.5228
28 : $3.6364
12 : $4.4319

25,080

MAX3535EEWI+

Maxim Integrated Products

IC TXRX RS485/422 28-SOIC
RoHS : Compliant

51 : $6.6291
41 : $6.8985
32 : $7.168
22 : $7.7071
15 : $7.9765
7 : $8.5155

20,000

EP5358LUI

Altera Corporation

Conv DC-DC 2.4V to 5.5V Synchronous Step Down Single-Out 0.6V to 5.25V 0.6A 16-Pin QFN T/R / DC/DC CONVERTER 0.6-5.2V 3W
RoHS : Compliant

9 : $36.9
7 : $38.4
6 : $39.9
4 : $42.9
3 : $44.4
2 : $47.4

5,078

DN3535N8-G

Microchip Technology Inc

MOSFET N-CH 350V 0.23A SOT89-3
RoHS : Compliant

218 : $1.3788
163 : $1.5379
126 : $1.591
92 : $1.644
59 : $1.697
25 : $2.0682

4,857

AK5357VT-E2

Asahi Kasei Microsystems Corporation

IC ADC AUDIO STER 24BIT 16TSSOP
RoHS : Compliant

54 : $5.591
43 : $5.8182
34 : $6.0455
24 : $6.5001
15 : $6.7273
7 : $7.1819

3,950

3-5353652-6

TE Connectivity

HARD TRAY ASSY FH 0.5BTB CONNECTOR PLUG 8H W/G-PLATE ON 2ROW CAP | CONN PLUG 440POS SMD GOLD
RoHS : Compliant

27 : $11.3682
22 : $11.8304
17 : $12.2925
12 : $13.2167
8 : $13.6788
4 : $14.6031

2,510

ADF5355BCPZ-RL7

Analog Devices Inc

Microwave Wideband Synthesizer with Integrated VCO | IC INTEGRATED SYNTH/VCO 32LFCSP
RoHS : Compliant

4 : $98.9085
3 : $110.321
2 : $114.1252
1 : $117.9294

2,100

TAS5352ADDVR

Texas Instruments

IC AMP AUDIO PWR 250W D 44TSSOP
RoHS : Compliant

29 : $10.6017
22 : $11.825
17 : $12.2328
12 : $12.6405
8 : $13.0483
4 : $15.9026

2,000

5352171-1

TE Connectivity

CONN RECEPT 95POS 2MM PRESS-FIT
RoHS : Compliant

73 : $4.1364
55 : $4.6137
42 : $4.7728
31 : $4.9319
20 : $5.091
9 : $6.2046

1,600

Wuhan P&S

FAN53526UC89X

onsemi

3A,2.4MHz,Digitally Programmable TinyBuck Regulator
RoHS : Compliant

1 : $1.12
100 : $0.72
500 : $0.59
1,000 : $0.54

141,000

NCV8535MN500R2G

onsemi

Ultra High Accuracy, Low Iq, 500 mA Low Dropout Regulator with Enable
RoHS : Compliant

1 : $1.94
100 : $1.24
500 : $1.02
1,000 : $0.94

3,000

535ZG10ZS-RV Distributor

Link URL