 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
5432-R2 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 Ameya Holding Limited | TPS5432DDAR | Texas Instruments | RoHS : Compliant | 25,000 | ||
TPS54326PWP | Texas Instruments | HTSSOP 14/I°/4.5V to 18V Input, 3A Synchronous Step-Down SWIFT Converter wi RoHS : Compliant | 1,140 | |||
TPS54325PWPR | Texas Instruments | 2 V to 18 Vin 3 A 700 kHz Step Down DC-DC Converter - HTSSOP-14 RoHS : Compliant | 552 | |||
TPS54327DDAR | Texas Instruments | IC_TPS54327_SWIT REG_CONTRL W/ FET STEP DOWN_1-OUT_DSO/8_3A_4.5V/18V_760mV/7V_-40C/85C RoHS : Compliant | 240 | |||
 ComSIT USA | 5031543290 | Molex | AVAILABLE EU | 2,145 | ||
ComSIT USA | TPS54320RHLT | Texas Instruments | Switching Regulator, Current-mode, 3A, 1200kHz Switching Freq-Max, PQCC14 RoHS : Compliant | 8,500 | ||
| SI5432DCT1GE3 | Vishay Intertechnologies | N-CHANNEL 20-V (D-S) MOSFET Small Signal Field-Effect Transistor, 6A I(D), 20V, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 7,745 | |||
| SMD02025432000MHZ102040+8512PF | PETERMANN-TECHNIK GmbH | Electronic Component RoHS : Compliant | 3,000 | |||
| 82543200 | Adolf Wuerth Gmbh & Co Kg | 1210 SMD VARISTOR Varistor, 26V, 1.9J, Surface Mount RoHS : Compliant | 2,000 | |||
 Chip 1 Exchange | 15432237X | Aptiv PLC | INSTOCK | 10,500 | ||
| CMF0805-432R-1%-50 | INSTOCK | 6,079 | ||||
| RCT054322FTP | RAL | INSTOCK | 6,000 | |||
| CRCW0805-4.32K | Vishay Intertechnologies | INSTOCK | 4,000 | |||
| TPS54327DDAR | Texas Instruments | INSTOCK RoHS : Compliant | 2,155 | |||
| SN75432PQ2 | Texas Instruments | INSTOCK | 750 | |||
| TPS54320RHLR | Texas Instruments | INSTOCK RoHS : Compliant | 730 | |||
| 196354-32021-3 | INSTOCK | 143 | ||||
| GT154324-21203-WG-01 | INSTOCK | 90 | ||||
 Avnet Silica | EVM54322-PB-00A | Monolithic Power Systems | EVM54322PB00A (Alt: EVM54322-PB-00A) RoHS : Compliant | 0 | ||
| MPM54322GPB-0000-P | Monolithic Power Systems | 16V 3A DUALOUTPUT POWER MODULE WITH I (Alt: MPM54322GPB-0000-P) RoHS : Compliant | 0 | |||
| MPM54322GPB-0000-T | Monolithic Power Systems | (Alt: MPM54322GPB-0000-T) RoHS : Compliant | 0 | |||
| MPM54322GPB-0000-Z | Monolithic Power Systems | 16V 3A DualOutput Power Module (Alt: MPM54322GPB-0000-Z) RoHS : Compliant | 0 | |||
| C15432_STRADELLA-16-HB-W | LEDIL | Stradella Lens for NFSx757G LEDs Clear PMMA Square Box (Alt: C15432_STRADELLA-16-HB-W) RoHS : Compliant | 0 | |||
 Component Electronics, Inc | CRCW08054320FRT1 | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 11,990 | |
| RCT054320FTP | IN STOCK SHIP TODAY |
| 4,996 | |||
| CRCW08054323FRT1 | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 4,900 | ||
| CR05-4323FM | Chip Technologies Inc | IN STOCK SHIP TODAY |
| 3,500 | ||
| CRCW08054321FRT1 | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 2,000 | ||
| 1658543-2 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 2,000 | ||
| RCI-0805-4320F | IMS Wire | IN STOCK SHIP TODAY |
| 2,000 | ||
| CCF-55-43.2R-1%-T-1R36 | Vishay Dale | IN STOCK SHIP TODAY |
| 889 | ||
| 350543-2 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 96 | ||
| CMF-55-4.32K-1%T-1-B14 | Vishay Dale | IN STOCK SHIP TODAY |
| 70 | ||
| TPS54326PWPR | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 40 | ||
| 54326-1 | Molex | IN STOCK SHIP TODAY |
| 30 | ||
| TPS54325PWPR | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 30 | ||
MAX5432LETA | Maxim Integrated Products | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 20 | ||
| F5432DM | Fairchild Semiconductor Corporation | IN STOCK SHIP TODAY | 10 | |||
 EBV Elektronik | CY8C27543-24AXI | Infineon Technologies AG | (Alt: SP005639533) RoHS : Compliant | 0 | ||
| CY8C27543-24AXIT | Infineon Technologies AG | PSoC Mixed Signal Array 44Pin TQFP TR (Alt: SP005639535) RoHS : Compliant | 0 | |||
| R5432V505BD-E2-FE | Nisshinbo Micro Devices | (Alt: R5432V505BD-E2-FE) RoHS : Compliant | 0 | |||
| C15432_STRADELLA-16-HB-W | LEDIL | Stradella Lens for NFSx757G LEDs Clear PMMA Square Box (Alt: C15432_STRADELLA-16-HB-W) RoHS : Compliant | 0 | |||
 FDH Electronics | 50075432-00 | Honeywell Sensing and Control | Switches |
| 0 | |
| 81543-20 | TE Connectivity | Elec. Contact RoHS : Not Compliant |
| 0 | ||
| 202D285-4-32-0 | TE Connectivity | Harness Mgmt |
| 0 | ||
| MS21354-321 | Safran Electrical & Power UK | Switches |
| 0 | ||
| 222D285-4-32-0 | TE Connectivity | Harness Mgmt |
| 0 | ||
 Flip Electronics | CY8C27543-24AXI | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 2,599 | |
| CY8C27543-24AXIT | Infineon Technologies AG | Stock RoHS : Compliant | 2,599 | |||
 Pasternack Enterprises US | PE3543-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm, Length: 24 inches. UHF Male to BNC Male Cable 24 Inch Length Using 75 Ohm RG59 Coax., Radio frequency assembly UHF male to BNC male cable 24 inch length using 75 Ohm RG59 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. UHF male to BNC male cable 24 inch length using 75 Ohm RG59 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom UHF to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with UHF cable connection on one end and BNC cable connection on the other. Our UHF to BNC cable assemblies have a male gender on end 1 and male on end 2. This UHF to BNC cable is a male to male coax assembly, PE3543-24, can also be known as a UHF plug to BNC plug cable assembly and will be shipped same-day as it is purchased. UHF plug to BNC plug cable assembly PE3543-24 is built with RG59 which is a flexible coax type. The Pasternack flexible UHF cable assembly is manufactured with UHF to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this UHF male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3543-24 can also be used in the other direction and will be BNC male to UHF male cable assembly if the opposite connectivity is required. UHF plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality UHF to BNC cable assembly for quick shipment worldwide. Variations of UHF cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this UHF male to BNC male cable 24 inch length using 75 Ohm RG59 coax. |
| 604 | |
| PE33543-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG213/U, RF Cable Type: RG213, RF Cable Impedance: 50 Ohm, Length: 24 inches. N Male to N Female Bulkhead Cable 24 Inch Length Using RG213 Coax., Radio frequency assembly N male to N female bulkhead cable 24 inch length using RG213 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N female bulkhead cable 24 inch length using RG213 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and type N bulkhead cable connection on the other. Our N type to type N cable assemblies have a male gender on end 1 and female on end 2. This type N to type N cable is a male to female coax assembly, PE33543-24, can also be known as a N type plug to type N jack cable assembly and will be shipped same-day as it is purchased. N type plug to type N jack cable assembly PE33543-24 is built with RG213 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this type N male to N type female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33543-24 can also be used in the other direction and will be type N female bulkhead to type N male cable assembly if the opposite connectivity is required. Type N plug to N type jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N female bulkhead cable 24 inch length using RG213 coax. |
| 162 | ||
| PE45432 | Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: SMA, Connector Gender: Female, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Solder/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 6 GHz, Interface Type 1: SPP-250-LLPL. SMA Female Connector Solder Attachment for SPP-250-LLPL, Low PIM. PE45432 SMA female coaxial connector has an interface type of SPP-250-LLPL and a 50 Ohm impedance. Pasternack SMA female connector uses shield/contact solder/solder as an attachment method. Our female SMA coaxial connector provides a minimum frequency of DC and a maximum frequency of 6 GHz. The Pasternack SMA female coaxial connector has a PTFE dielectric type and a VSWR of 1.3. The Pasternack SMA coaxial connector has a brass body with tri-metal plating. Our PE45432 SMA connector uses beryllium copper contact and a tri-metal plating material. This SMA female coaxial RF connector is RoHS and REACH compliant. This Pasternack female SMA connector will ship the same day as purchased. Our SMA female connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom SMA connector cable assemblies that will ship the same day as well. |
| 70 | ||
| PE3C7543-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Plenum N Male Right Angle to SMA Male Low PIM Cable 24 Inch Length Using SPP-250-LLPL Coax., Radio frequency assembly plenum N male right angle to SMA male low PIM cable 24 inch length using SPP-250-LLPL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The plenum N male right angle to SMA male low PIM cable 24 inch length using SPP-250-LLPL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with right angle a type N cable connection on one end and a SMA cable connection on the other. Our low PIM right angle a type N to a SMA cable assembly has male gender on end 1 and male on end 2. PE3C7543-24 can also be known as a low PIM right angle type N plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. Our PE3C7543-24 RF cable has a FEP jacket of 0.280-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The corrugated RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 100 dB. Type N plug to SMA plug cable assembly PE3C7543-24 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated type N cable assembly is manufactured with right angle type N to SMA cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C7543-24 can also be used in the other direction and will be SMA male to right angle type N male cable assembly if the opposite connectivity is required. Low PIM type N right angle plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA low PIM RF cable assembly as per your requirements. |
| 9 | ||
| PE3MSA00543-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02001, RF Cable Type: 30-02001, RF Cable Impedance: 78 Ohm, Length, Max: 24 inches. Lead Free 78 Ohm TRB 3-Slot Solder/Clamp Plug to 3-Lug Solder/Clamp Non-Insulated Bulkhead Jack for PE-30-02001 Twinax 24" Cable., Radio frequency assembly lead free 78 Ohm TRB 3-Slot solder/clamp plug to 3-Lug solder/clamp non-insulated bulkhead jack for PE-30-02001 twinax 24" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Lead free 78 Ohm TRB 3-Slot solder/clamp plug to 3-Lug solder/clamp non-insulated bulkhead jackfor PE-30-02001 twinax 24" cable, TRB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB bulkhead cable connection on the other. Our 1553 TRB to TRB cable assemblies have a plug gender on end 1 and jack on end 2. PE3MSA00543-24 can also be known as a 1553 TRB male to TRB female cable assembly and will be shipped same-day as it is purchased. TRB male to TRB female cable assembly PE3MSA00543-24 is built with 30-02001 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 400 MHz maximum frequency TRB plug to TRB jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MSA00543-24 can also be used in the other direction and will be TRB jack bulkhead to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to TRB female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this lead free 78 Ohm TRB 3-Slot solder/clamp plug to 3-Lug solder/clamp non-insulated bulkhead jack for PE-30-02001 twinax 24" cable. |
| 2 | ||
| PE3W25432 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMA Female Cable Using LMR-100A-UF Coax. PE3W25432 is a SMA male right angle to SMA female cable using LMR-100A-UF coax. This Pasternack SMA male right angle to SMA female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W25432 SMA male right angle to SMA female cable assembly is constructed with LMR-100A-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C5432 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Trimmed Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to Trimmed Lead Cable Using PE-SR402FLJ Coax., Radio frequency assembly 7/16 DIN male to trimmed lead cable using PE-SR402FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 7/16 DIN male to trimmed lead cable using PE-SR402FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to Trimmed Lead cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 7/16 DIN cable connection on one end and Trimmed Lead cable connection on the other. Our 7/16 DIN to Trimmed Lead cable assemblies have a male gender on end 1 and sexless on end 2. This 7/16 DIN to Trimmed Lead cable is a male to sexless coax assembly, PE3C5432, can also be known as a 7/16 DIN plug to Trimmed Lead sexless cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to Trimmed Lead sexless cable assembly PE3C5432 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable 7/16 DIN cable assembly is manufactured with 7/16 DIN to Trimmed Lead cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 7/16 DIN male to Trimmed Lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5432 can also be used in the other direction and will be Trimmed Lead sexless to 7/16 DIN male cable assembly if the opposite connectivity is required. 7/16 DIN plug to Trimmed Lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to Trimmed Lead cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to trimmed lead cable using PE-SR402FLJ coax. | 0 | |||
| PE3MP2543-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 24 inches. Bend Relief 3-Lug TRB Jack to Jack for 78 Ohm PE-30-02003, 24" Cable., Radio frequency assembly bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02003, 24" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02003, 24" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a jack gender on end 1 and jack on end 2. PE3MP2543-24 can also be known as a 1553 TRB female to TRB female cable assembly and will be shipped same-day as it is purchased. TRB female to TRB female cable assembly PE3MP2543-24 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB jack to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB female to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this bend relief 3-Lug TRB jack to jack for 78 Ohm PE-30-02003, 24" cable. |
| 0 | ||
| PE3W01543-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SSMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. SSMA Male to BNC Male Low Loss Cable 200 CM Length Using LMR-100 Coax., Radio frequency assembly SSMA male to BNC male low loss cable 200 cm length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SSMA male to BNC male low loss cable 200 cm length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SSMA to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SSMA cable connection on one end and a BNC cable connection on the other. Our low loss SSMA to BNC cable assembly has a male gender on end 1 and a male on end 2. PE3W01543-200CM can also be known as a low loss SSMA plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01543-200CM RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our SSMA male to BNC male cable has a maximum VSWR of 1.4:1. SSMA plug to BNC plug cable assembly PE3W01543-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SSMA cable assembly is manufactured with SSMA to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has the crimp/crimp attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W01543-200CM can also be used in the other direction and will be a BNC male to SSMA male cable assembly if the opposite connectivity is required. Low loss SSMA plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SSMA to BNC cable assembly for quick shipment worldwide. Variations of SSMA and BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SSMA to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W05432 | Pasternack Enterprises | Key Specifications, Connector Series 1: SSMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. SSMA Female to SMA Female Cable Using RG316 Coax. PE3W05432 is a SSMA female to SMA female cable using RG316 coax. This Pasternack SSMA female to SMA female cable assembly uses a 50 Ohm SSMA for connector 1 and a 50 Ohm SMA for connector 2. Our female SSMA to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W05432 SSMA female to SMA female cable assembly is constructed with RG316 coax. | 0 | |||
| PE3W04543-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male Right Angle to SMB Plug Cable 24 Inch Length Using RG316 Coax., Radio frequency assembly SMA male right angle to SMB plug cable 24 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to SMB plug cable 24 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMB cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and SMB cable connection on the other. Our right angle SMA to SMB cable assembly has male gender on end 1 and plug on end 2. PE3W04543-24 can also be known as a right angle SMA plug to SMB male cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMA plug to SMB male cable assembly PE3W04543-24 is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMB cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has clamp/solder attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE3W04543-24 RF cable are available on our downloadable PDF datasheet.PE3W04543-24 can also be used in the other direction and will be SMB plug to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMB male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMB cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3W15432LF | Pasternack Enterprises | Key Specifications, Connector Series 1: D-Sub, Connector Gender 1: Receptacle, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: D-Sub, Connector Gender 2: Receptacle, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm. D-Sub Receptacle to D-Sub Receptacle Cable Using LMR-100A-UF Coax, LF Solder. PE3W15432LF is a D-Sub receptacle to D-Sub receptacle cable using LMR-100A-UF coax. This Pasternack D-Sub receptacle to D-Sub receptacle cable assembly uses a 50 Ohm D-Sub for connector 1 and a 50 Ohm D-Sub for connector 2. Our receptacle D-Sub to receptacle D-Sub cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W15432LF D-Sub receptacle to D-Sub receptacle cable assembly is constructed with LMR-100A-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W01543-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SSMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SSMA Male to BNC Male Low Loss Cable 24 Inch Length Using LMR-100 Coax., Radio frequency assembly SSMA male to BNC male low loss cable 24 inch length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SSMA male to BNC male low loss cable 24 inch length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SSMA to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SSMA cable connection on one end and a BNC cable connection on the other. Our low loss SSMA to BNC cable assembly has a male gender on end 1 and a male on end 2. PE3W01543-24 can also be known as a low loss SSMA plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01543-24 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our SSMA male to BNC male cable has a maximum VSWR of 1.4:1. SSMA plug to BNC plug cable assembly PE3W01543-24 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SSMA cable assembly is manufactured with SSMA to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has the crimp/crimp attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W01543-24 can also be used in the other direction and will be a BNC male to SSMA male cable assembly if the opposite connectivity is required. Low loss SSMA plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SSMA to BNC cable assembly for quick shipment worldwide. Variations of SSMA and BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SSMA to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
 Venkel Ltd. | TRCR0805-432MT | VENKEL LTD | Trimmable CR;0805;4.3K;�20% RoHS : Compliant | 0 | ||
 Vyrian | 1543281 | Phoenix Contact | Circular Connector, 4 Contact(s), Male, Plug RoHS : Compliant | 2,500 | ||
AD5432BRM-REEL7 | Analog Devices Inc | D/A Converter, 1 Func, PDSO10 | 1,950 | |||
| 5432AAANQ1 | Texas Instruments | 1,300 | ||||
| 2N5432 | Texas Instruments | 1,150 | ||||
| EDB5432BEPA-1DIT-F-R TR | Micron Technology Inc | 1,050 | ||||
| 5962-00-543-2295 | Texas Instruments | NOR Gate, TTL, CDIP14 RoHS : Not Compliant | 950 | |||
| 5432546 | Phoenix Contact | Strip Terminal Block RoHS : Compliant | 870 | |||
| EDB5432BEPA-1DIT-F | Micron Technology Inc | LPDDR2 DRAM, 16MX32, CMOS, PBGA168 RoHS : Compliant | 830 | |||
| 5432W | Texas Instruments | OR Gate, TTL/H/L Series, 4-Func, 2-Input, TTL, CDFP14 | 780 | |||
5432630 | Phoenix Contact | Strip Terminal Block, 12A, 1 Row(s), 1 Deck(s) RoHS : Compliant | 780 | |||
| 415-43-236-41-003000 | Mill-max Mfg | 310 | ||||
| D4D-615432000202105 | Intel Corporation | 220 | ||||
AD2S65/432 | Analog Devices Inc | Digital to Synchro or Resolver, Hybrid, CDIP32 RoHS : Not Compliant | 200 | |||
| 5432A0GPAANRQ1 | Texas Instruments | 160 | ||||
| 1543236 | Phoenix Contact | Circular Connector, 8 Contact(s), Male, Plug RoHS : Compliant | 140 | |||
 Win Source Electronics | TPS54328DDA | Texas Instruments | 4.5V to 18V Input, 3-A Synchronous Step-Down SWIFT™ Converter with Eco-Mode™ | IC REG BUCK ADJUSTABLE 3A 8SOPWR RoHS : Compliant |
| 108,014 | |
| TPS54328DDAR | Texas Instruments | IC REG BUCK ADJ 3A SYNC 8SOPWR RoHS : Compliant |
| 83,800 | ||
TPS54320RHL | Texas Instruments | 4.5V to 17V Input, 3A Synchronous Step Down SWIFT Converter |
| 60,000 | ||
| TPS54320RHLT | Texas Instruments | IC REG BUCK ADJ 3A SYNC 14QFN RoHS : Compliant |
| 56,100 | ||
| TPS54327DDA | Texas Instruments | IC REG BUCK ADJ 3A SYNC 8SOPWR RoHS : Compliant |
| 52,500 | ||
| TPS54320RHLR | Texas Instruments | IC REG BUCK ADJ 3A SYNC 14QFN / Conv DC-DC 4.5V to 17V Synchronous Step Down Single-Out 0.8V to 15V 3A 14-Pin VQFN EP T/R RoHS : Compliant |
| 42,000 | ||
| TPS54325PWPRG4 | Texas Instruments | Buck Switching Regulator IC Positive Adjustable 0.76V 1 Output 3A 14-TSSOP (0.173", 4.40mm Width) Exposed Pad RoHS : Compliant |
| 37,980 | ||
| TPS54325PWPR | Texas Instruments | IC REG BUCK ADJ 3A SYNC 14HTSSOP RoHS : Compliant |
| 37,340 | ||
| TPS54325PWPG4 | Texas Instruments |
| 36,980 | |||
| TPS54328DRCR | Texas Instruments | IC REG BUCK ADJ 3A SYNC 10SON RoHS : Compliant |
| 28,859 | ||
| TPS5432DDAR | Texas Instruments | IC REG BUCK ADJ 3A SYNC 8SOPWR / Conv DC-DC 2.95V to 6V Synchronous Step Down Single-Out 0.808V to 4.5V 3A 8-Pin HSOP EP T/R RoHS : Compliant |
| 20,000 | ||
| SI5432DC-T1-GE3 | Vishay Huntington | MOSFET N-CH 20V 6A 1206-8 |
| 15,000 | ||
| TPS54328DRC | Texas Instruments | Step-Down DC-DC Converter 18V 2A 700kHz VSON-10 |
| 6,000 | ||
| TPS54328DRCT | Texas Instruments | IC REG BUCK ADJUSTABLE 3A 10VSON / Buck Switching Regulator IC Positive Adjustable 0.76V 1 Output 3A 10-VFDFN Exposed Pad RoHS : Compliant |
| 5,570 | ||
AD5432YRMZ-REEL7 | Analog Devices Inc | IC DAC 10BIT A-OUT 10MSOP / 10 Bit Digital to Analog Converter 1 10-MSOP RoHS : Compliant |
| 2,780 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼ 
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand