| Electronic Components Datasheet Search |
|
54SWG-AL3-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() NexGen Digital | BAT54ST-7-F | Diodes Incorporated | RoHS : Compliant | 69,000 | ||
BAT54SWT1G![]() | onsemi | RoHS : Compliant | 1,406 | |||
| SBAT54SLT1G | onsemi | RoHS : Compliant | 1,250 | |||
| SNJ54S138J | Signetics | 72 | ||||
BAT54SLT1![]() | onsemi | RoHS : Not Compliant | 31 | |||
| MLS0805-4S7-102 | Ferroxcube International Holding BV | RoHS : Compliant | 15 | |||
| BAT54S-7-F | Sigma Designs | 9 | ||||
![]() Powell Electronics | WTB54SAD11SY-42 | AirBorn a molex company | Rectangular PCB Connector |
| 519 | |
| DWM-01-54-S-S-300 | Samtec Inc | .050" x .100" Flex Stack, Flexible Micro RoHS : Compliant |
| 206 | ||
| DWM-02-54-S-S-310 | Samtec Inc | .050" x .100" Flex Stack, Flexible Micro RoHS : Compliant |
| 194 | ||
| DWM-14-54-S-S-300 | Samtec Inc | .050" x .100" Flex Stack, Flexible Micro RoHS : Compliant |
| 83 | ||
| TVPS00RF-23-54SA-LC | Amphenol Corporation | TV 40#22D 9#16 4#12 SKT RECP |
| 67 | ||
| TMS-129-54-S-S | Samtec Inc | Through-hole Micro Header, 0.050" x 0.10 RoHS : Compliant |
| 59 | ||
| WTAX54SAD9JTA | AirBorn a molex company | Sandwich Boards - Straight and Right Ang RoHS : Compliant |
| 58 | ||
| WTAX54SAD9SYL-24 | AirBorn a molex company | Sandwich Boards - Straight and Right Ang |
| 58 | ||
| WTA54SAF6JL | AirBorn a molex company | Straight Cable and Plated Thru Hole (and |
| 45 | ||
| WTAX54SAF6SYL-16 | AirBorn a molex company | Sandwich Boards - Straight and Right Ang |
| 45 | ||
| WTAX54SAF6SYL-3 | AirBorn a molex company | Sandwich Boards - Straight and Right Ang |
| 45 | ||
| WTAX54SAF6SYL-61 | AirBorn a molex company | Sandwich Boards - Straight and Right Ang |
| 45 | ||
| WTAX54SAD11SYL-25 | AirBorn a molex company | Sandwich Boards - Straight and Right Ang |
| 15 | ||
| WTB54SACSY-41 | AirBorn a molex company | Rectangular PCB Connector |
| 9 | ||
| TVP00RW-11-54S | Amphenol Corporation | CONNECTOR RoHS : Not Compliant |
| 1 | ||
![]() PUI | BAT54S-G | 6,000 | ||||
| BAT54S-HF | 6,000 | |||||
![]() Chip 1 Exchange | BAT54S-QR![]() | Nexperia | INSTOCK RoHS : Compliant | 1,074,000 | ||
| SBAT54SLT1G | onsemi | INSTOCK RoHS : Compliant | 101,884 | |||
| BAT54SW-7-F | Diodes Incorporated | INSTOCK RoHS : Compliant | 12,012 | |||
| SBAT54SLT1G | onsemi | INSTOCK RoHS : Compliant | 12,000 | |||
| BAT54S-G | Comchip Technology Corporation Ltd | INSTOCK RoHS : Compliant | 6,000 | |||
| BAT54S-HF | Comchip Technology Corporation Ltd | INSTOCK RoHS : Compliant | 6,000 | |||
| MLS0805-4S7-102 | INSTOCK | 3,601 | ||||
| BAT54SWQ-7-F | Diodes Incorporated | INSTOCK RoHS : Compliant | 1,000 | |||
| KL-196/25,4/SW | SEIF. | INSTOCK | 502 | |||
| BAT54SDW | PanJit Semiconductor | INSTOCK RoHS : Compliant | 145 | |||
| MSTB2.5-4-ST | INSTOCK | 100 | ||||
NSVBAT54SWT1G![]() | onsemi | INSTOCK RoHS : Compliant | 65 | |||
| MC1.5/4-STF-5.08 | INSTOCK | 42 | ||||
| 541354SARTX1 | INSTOCK | 21 | ||||
| MSM80C154S | OKI Electric Industry Co Ltd | INSTOCK | 8 | |||
![]() Avnet Asia | S-LBAT54SLT1G | LRC Leshan Radio Co Ltd | Schottky Rectifier, 30 V, 200 mA, Dual Series, TO-236 (SOT-23), 3 Pins, 1 V (Alt: S-LBAT54SLT1G) RoHS : Compliant | 9,000 | ||
BAT54SWF![]() | Nexperia | (Alt: BAT54SWF) RoHS : Compliant | 0 | |||
BAT54S-QVL![]() | Nexperia | (Alt: BAT54S-QVL) RoHS : Compliant | 0 | |||
| BAT54SHMFHT116 | ROHM Semiconductor | (Alt: BAT54SHMFHT116) RoHS : Compliant |
| 0 | ||
| 10072354-S01-10KLF | Amphenol Corporation | Connector Shrouded Header 10 Position Right Angle Through Hole T/R (Alt: 10072354-S01-10KLF) RoHS : Compliant | 0 | |||
| BAT54S_R1_00301 | PanJit Semiconductor | SCHOTTKY DIODES & RECTIFIERS (Alt: BAT54S_R1_00301) RoHS : Compliant | 0 | |||
BAT54S-QR![]() | Nexperia | (Alt: BAT54S-QR) RoHS : Compliant | 0 | |||
BAT54SW,115![]() | Nexperia | Small Signal Schottky Diode, Dual Series, 30 V, 200 mA, 800 mV, 600 mA, 150 ?C, 3 Pins, SC-70 (SOT-323) (Alt: BAT54SW,115) RoHS : Compliant |
| 0 | ||
| SBAT54SLT1G | onsemi | Small Signal Schottky Diode, Dual Series, 30 V, 200 mA, 800 mV, 600 mA, 150 ?C (Alt: SBAT54SLT1G) RoHS : Compliant |
| 0 | ||
| BAT54S-Q/S320R | Nexperia | SCHOTTKY BARRIER DIODE (Alt: BAT54S-Q/S320R) RoHS : Compliant | 0 | |||
NSVBAT54SWT1G![]() | onsemi | 200 mA, 30 V, Schottky Diode, Dual Series. (Alt: NSVBAT54SWT1G) RoHS : Compliant |
| 0 | ||
BAT54SW-QX![]() | Nexperia | (Alt: BAT54SW-QX) RoHS : Compliant | 0 | |||
| RCLAMP0554S.TCT | Semtech Corporation | ESD Protection Device, 15 V, SOT-23, 6 Pins, 5 V, 5 pF (Alt: RCLAMP0554S.TCT) RoHS : Compliant | 0 | |||
| PFE1100-12-054SD | Bel Fuse | (Alt: PFE1100-12-054SD) RoHS : Compliant | 0 | |||
| BAT54SHYFHT116 | ROHM Semiconductor | Diode Small Signal Schottky 200mA 3-Pin SOT-23 Emboss T/R (Alt: BAT54SHYFHT116) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | SEN54-SDN-T | Sensirion | Environmental Node, Combo Module for PM, RHT, VOC measurements RoHS : Compliant |
| 0 | |
![]() EBV Elektronik | BAT54SWT1G![]() | onsemi | Small Signal Schottky Diode Dual Series 30 V 200 mA 800 mV 600 mA 125 C (Alt: BAT54SWT1G) RoHS : Compliant | 6,738,000 | ||
BAT54SLT1G![]() | onsemi | Small Signal Schottky Diode Dual Series 30 V 200 mA 400 mV 600 mA 150 C (Alt: BAT54SLT1G) RoHS : Compliant | 987,000 | |||
| BAT54SWFILM | STMicroelectronics | Diode Small Signal Schottky 40V 03A 3Pin SOT323 TR (Alt: BAT54SWFILM) RoHS : Compliant | 186,000 | |||
| BAT54S-E3-08 | Vishay Intertechnologies | Small Signal Schottky Diode Dual Series 30 V 200 mA 400 mV 600 mA 125 C (Alt: BAT54S-E3-08) RoHS : Compliant | 6,000 | |||
| A54SX32A-1CQ208 | Microchip Technology Inc | (Alt: A54SX32A-1CQ208) RoHS : Compliant | 0 | |||
| A54SX32A-1CQ84B | Microchip Technology Inc | FPGA SXA Family 32K Gates 1800 Cells 278MHz 025um022um CMOS Technology 25V 84Pin CQFP (Alt: A54SX32A-1CQ84B) RoHS : Not Compliant | 0 | |||
| A54SX32A-TQG100 | Microchip Technology Inc | FPGA SXA Family 32K Gates 1800 Cells 238MHz 025um022um CMOS Technology 25V 100Pin TQFP (Alt: A54SX32A-TQG100) RoHS : Compliant | 0 | |||
| A54SX72A-2FG484 | Microchip Technology Inc | FPGA SXA Family 72K Gates 4024 Cells 294MHz 025um022um CMOS Technology 25V 484Pin FBGA (Alt: A54SX72A-2FG484) RoHS : Not Compliant | 0 | |||
| A54SX72A-CQ256B | Microchip Technology Inc | FPGA SXA Family 72K Gates 4024 Cells 217MHz 025um022um CMOS Technology 25V 256Pin CQFP (Alt: A54SX72A-CQ256B) RoHS : Not Compliant | 0 | |||
| A54SX72A-FG256I | Microchip Technology Inc | FPGA SXA Family 72K Gates 4024 Cells 217MHz 025um022um CMOS Technology 25V 256Pin FBGA (Alt: A54SX72A-FG256I) RoHS : Not Compliant | 0 | |||
| A54SX08A-TQG100I | Microchip Technology Inc | FPGA SXA Family 8K Gates 512 Cells 238MHz 025um022um CMOS Technology 25V 100Pin TQFP (Alt: A54SX08A-TQG100I) RoHS : Compliant | 0 | |||
| A54SX08A-2TQ144I | Microchip Technology Inc | FPGA SXA Family 8K Gates 512 Cells 313MHz 025um022um CMOS Technology 25V 144Pin TQFP (Alt: A54SX08A-2TQ144I) RoHS : Not Compliant | 0 | |||
| A54SX16A-TQG100I | Microchip Technology Inc | FPGA SXA Family 16K Gates 924 Cells 227MHz 025um022um CMOS Technology 25V 100Pin TQFP (Alt: A54SX16A-TQG100I) RoHS : Compliant | 0 | |||
| A54SX32A-TQG100I | Microchip Technology Inc | FPGA SXA Family 32K Gates 1800 Cells 238MHz 025um022um CMOS Technology 25V 100Pin TQFP (Alt: A54SX32A-TQG100I) RoHS : Compliant | 0 | |||
| A54SX16A-2TQG100I | Microchip Technology Inc | FPGA SXA Family 16K Gates 924 Cells 294MHz 025um022um CMOS Technology 25V 100Pin TQFP (Alt: A54SX16A-2TQG100I) RoHS : Compliant | 0 | |||
![]() Pasternack Enterprises US | PE3W06854-SP1 | Pasternack Enterprises | Key Specifications, Connector Series 1: QN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. QN Male to Reverse Polarity SMA Female Bulkhead Cable Using LMR-195 Coax with HeatShrink., Radio frequency assembly QN male to reverse polarity SMA female bulkhead cable using LMR-195 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. QN male to reverse polarity SMA female bulkhead cable using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QN to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with QN cable connection on one end and reverse polarity SMA bulkhead cable connection on the other. Our QN to reverse polarity SMA cable assemblies have a male gender on end 1 and female on end 2. This QN to reverse polarity SMA cable is a male to female coax assembly, PE3W06854-SP1, can also be known as a QN plug to reverse polarity SMA jack cable assembly and will be shipped same-day as it is purchased. QN plug to reverse polarity SMA jack cable assembly PE3W06854-SP1 is built with LMR-195 which is a flexible coax type. The Pasternack flexible QN cable assembly is manufactured with QN to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency QN male to reverse polarity SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06854-SP1 can also be used in the other direction and will be reverse polarity SMA female bulkhead to QN male cable assembly if the opposite connectivity is required. QN plug to SMA reverse polarity jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QN to SMA cable assembly for quick shipment worldwide. Variations of QN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this QN male to reverse polarity SMA female bulkhead cable using LMR-195 coax with heatshrink. | 1,026 | ||
| PE3W06854-SP1-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: QN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. QN Male to Reverse Polarity SMA Female Bulkhead Cable 100 cm Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly QN male to reverse polarity SMA female bulkhead cable 100 cm length using LMR-195 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. QN male to reverse polarity SMA female bulkhead cable 100 cm length using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QN to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with QN cable connection on one end and reverse polarity SMA bulkhead cable connection on the other. Our QN to reverse polarity SMA cable assemblies have a male gender on end 1 and female on end 2. This QN to reverse polarity SMA cable is a male to female coax assembly, PE3W06854-SP1-100CM, can also be known as a QN plug to reverse polarity SMA jack cable assembly and will be shipped same-day as it is purchased. QN plug to reverse polarity SMA jack cable assembly PE3W06854-SP1-100CM is built with LMR-195 which is a flexible coax type. The Pasternack flexible QN cable assembly is manufactured with QN to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency QN male to reverse polarity SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06854-SP1-100CM can also be used in the other direction and will be reverse polarity SMA female bulkhead to QN male cable assembly if the opposite connectivity is required. QN plug to SMA reverse polarity jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QN to SMA cable assembly for quick shipment worldwide. Variations of QN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this QN male to reverse polarity SMA female bulkhead cable 100 cm length using LMR-195 coax with heatshrink. |
| 114 | ||
| PE3W06854-SP1-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: QN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 12 inches. QN Male to Reverse Polarity SMA Female Bulkhead Cable 12 Inch Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly QN male to reverse polarity SMA female bulkhead cable 12 inch length using LMR-195 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. QN male to reverse polarity SMA female bulkhead cable 12 inch length using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QN to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with QN cable connection on one end and reverse polarity SMA bulkhead cable connection on the other. Our QN to reverse polarity SMA cable assemblies have a male gender on end 1 and female on end 2. This QN to reverse polarity SMA cable is a male to female coax assembly, PE3W06854-SP1-12, can also be known as a QN plug to reverse polarity SMA jack cable assembly and will be shipped same-day as it is purchased. QN plug to reverse polarity SMA jack cable assembly PE3W06854-SP1-12 is built with LMR-195 which is a flexible coax type. The Pasternack flexible QN cable assembly is manufactured with QN to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency QN male to reverse polarity SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06854-SP1-12 can also be used in the other direction and will be reverse polarity SMA female bulkhead to QN male cable assembly if the opposite connectivity is required. QN plug to SMA reverse polarity jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QN to SMA cable assembly for quick shipment worldwide. Variations of QN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this QN male to reverse polarity SMA female bulkhead cable 12 inch length using LMR-195 coax with heatshrink. |
| 114 | ||
| PE3W06854-SP1-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: QN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 59.05 inches. QN Male to Reverse Polarity SMA Female Bulkhead Cable 150 cm Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly QN male to reverse polarity SMA female bulkhead cable 150 cm length using LMR-195 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. QN male to reverse polarity SMA female bulkhead cable 150 cm length using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QN to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with QN cable connection on one end and reverse polarity SMA bulkhead cable connection on the other. Our QN to reverse polarity SMA cable assemblies have a male gender on end 1 and female on end 2. This QN to reverse polarity SMA cable is a male to female coax assembly, PE3W06854-SP1-150CM, can also be known as a QN plug to reverse polarity SMA jack cable assembly and will be shipped same-day as it is purchased. QN plug to reverse polarity SMA jack cable assembly PE3W06854-SP1-150CM is built with LMR-195 which is a flexible coax type. The Pasternack flexible QN cable assembly is manufactured with QN to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency QN male to reverse polarity SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06854-SP1-150CM can also be used in the other direction and will be reverse polarity SMA female bulkhead to QN male cable assembly if the opposite connectivity is required. QN plug to SMA reverse polarity jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QN to SMA cable assembly for quick shipment worldwide. Variations of QN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this QN male to reverse polarity SMA female bulkhead cable 150 cm length using LMR-195 coax with heatshrink. |
| 114 | ||
| PE3W06854-SP1-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: QN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. QN Male to Reverse Polarity SMA Female Bulkhead Cable 200 cm Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly QN male to reverse polarity SMA female bulkhead cable 200 cm length using LMR-195 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. QN male to reverse polarity SMA female bulkhead cable 200 cm length using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QN to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with QN cable connection on one end and reverse polarity SMA bulkhead cable connection on the other. Our QN to reverse polarity SMA cable assemblies have a male gender on end 1 and female on end 2. This QN to reverse polarity SMA cable is a male to female coax assembly, PE3W06854-SP1-200CM, can also be known as a QN plug to reverse polarity SMA jack cable assembly and will be shipped same-day as it is purchased. QN plug to reverse polarity SMA jack cable assembly PE3W06854-SP1-200CM is built with LMR-195 which is a flexible coax type. The Pasternack flexible QN cable assembly is manufactured with QN to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency QN male to reverse polarity SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06854-SP1-200CM can also be used in the other direction and will be reverse polarity SMA female bulkhead to QN male cable assembly if the opposite connectivity is required. QN plug to SMA reverse polarity jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QN to SMA cable assembly for quick shipment worldwide. Variations of QN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this QN male to reverse polarity SMA female bulkhead cable 200 cm length using LMR-195 coax with heatshrink. |
| 114 | ||
| PE3W06854-SP1-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: QN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 24 inches. QN Male to Reverse Polarity SMA Female Bulkhead Cable 24 Inch Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly QN male to reverse polarity SMA female bulkhead cable 24 inch length using LMR-195 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. QN male to reverse polarity SMA female bulkhead cable 24 inch length using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QN to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with QN cable connection on one end and reverse polarity SMA bulkhead cable connection on the other. Our QN to reverse polarity SMA cable assemblies have a male gender on end 1 and female on end 2. This QN to reverse polarity SMA cable is a male to female coax assembly, PE3W06854-SP1-24, can also be known as a QN plug to reverse polarity SMA jack cable assembly and will be shipped same-day as it is purchased. QN plug to reverse polarity SMA jack cable assembly PE3W06854-SP1-24 is built with LMR-195 which is a flexible coax type. The Pasternack flexible QN cable assembly is manufactured with QN to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency QN male to reverse polarity SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06854-SP1-24 can also be used in the other direction and will be reverse polarity SMA female bulkhead to QN male cable assembly if the opposite connectivity is required. QN plug to SMA reverse polarity jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QN to SMA cable assembly for quick shipment worldwide. Variations of QN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this QN male to reverse polarity SMA female bulkhead cable 24 inch length using LMR-195 coax with heatshrink. |
| 114 | ||
| PE3C7354/SP | Pasternack Enterprises | 0 | ||||
| PE39454/SP-6.125 | Pasternack Enterprises |
| 0 | |||
| PE9854/SF-10 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-62, Gain Min: 10, Beam Width, 3dB V: 55.3, Beam Width, 3dB H: 50.9, Frequency, Min: 12.4 GHz, Frequency, Max: 18 GHz. WR-62 Waveguide Standard Gain Horn Antenna Operating From 12.4 GHz to 18 GHz With a Nominal 10 dB Gain SMA Female Input. The PE9854/SF-10 standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-62 input and a waveguide to coaxial transition adapter. Our WR-62 waveguide antenna features an SMA female connector. This single-band directional antenna comes with a flange. Our WR-62 standard gain horn antenna with an SMA female input has a minimum frequency of 12.4 GHz and a maximum frequency of 18 GHz. Pasternack’s PE9854/SF-10 waveguide horn antenna has a typical gain of 10 dB. Our waveguide antenna has a typical vertical beam width of 55.3 degrees and a horizontal beam width of 50.9 degrees at 3 dB. This WR-62 waveguide horn antenna with 10 dB gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this single-band directional antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with an SMA female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 0 | ||
| PE9854/SF-15 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-62, Gain Min: 15, Beam Width, 3dB V: 30.1, Beam Width, 3dB H: 31.2, Frequency, Min: 12.4 GHz, Frequency, Max: 18 GHz. WR-62 Waveguide Standard Gain Horn Antenna Operating From 12.4 GHz to 18 GHz With a Nominal 15 dB Gain SMA Female Input. The PE9854/SF-15 standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-62 input and a waveguide to coaxial transition adapter. Our WR-62 waveguide antenna features an SMA female connector. This single-band directional antenna comes with a flange. Our WR-62 standard gain horn antenna with an SMA female input has a minimum frequency of 12.4 GHz and a maximum frequency of 18 GHz. Pasternack’s PE9854/SF-15 waveguide horn antenna has a typical gain of 15 dB. Our waveguide antenna has a typical vertical beam width of 30.1 degrees and a horizontal beam width of 31.2 degrees at 3 dB. This WR-62 waveguide horn antenna with 15 dB gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this single-band directional antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with an SMA female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 0 | ||
| PE3W23954/SP | Pasternack Enterprises | 0 | ||||
| PE3C0554/SP1 | Pasternack Enterprises | 0 | ||||
| PE3W03754/SP | Pasternack Enterprises | 0 | ||||
| PE39454/SP | Pasternack Enterprises | 0 | ||||
| PE3W02654/SP | Pasternack Enterprises | 0 | ||||
![]() Venkel Ltd. | BAT54S-EVL | VENKEL LTD | Recitifier Array;SOT-23;30V;200mA;Series RoHS : Not Compliant | 9,000 | ||
| BAT54SW-EVL | VENKEL LTD | Recitifier Array;SOT-323;30V;200mA;Series RoHS : Not Compliant | 0 | |||
![]() Vyrian | TV06RW-15-4SA | Amphenol Corporation | MIL Series Connector, 4 Contact(s), Aluminum Alloy, Female, Crimp Terminal, Plug RoHS : Not Compliant | 16,063 | ||
| TV06RW-15-4S-LC | Amphenol Corporation | MIL Series Connector, 4 Contact(s), Aluminum Alloy, Female, Crimp Terminal, Plug RoHS : Not Compliant | 15,134 | |||
| TV06RW-15-4SB | Amphenol Corporation | MIL Series Connector, 4 Contact(s), Aluminum Alloy, Female, Crimp Terminal, Plug RoHS : Not Compliant | 15,038 | |||
TSL254SR![]() | Texas Instruments | Analog Circuit, 1 Func, PSIP3 | 9,317 | |||
| W1211-602001/BCM94554SV_V00 | Broadcom Limited | 9,193 | ||||
| TV06RW-15-4SC | Amphenol Corporation | MIL Series Connector, 4 Contact(s), Aluminum Alloy, Female, Crimp Terminal, Plug RoHS : Not Compliant | 9,005 | |||
| TV07RW-23-54S | Amphenol Corporation | MIL Series Connector, 53 Contact(s), Aluminum Alloy, Female, Crimp Terminal, Receptacle RoHS : Not Compliant | 8,770 | |||
| W1211-602001/BCM94554SV_V10 | Broadcom Limited | 8,607 | ||||
| TMS320C6654SCZH8 | Texas Instruments | Digital Signal Processor, 0-Ext Bit, CMOS, PBGA625 | 8,013 | |||
| TMS320C6654SGZHA8 | Texas Instruments | Digital Signal Processor, 0-Ext Bit, CMOS, PBGA625 | 7,858 | |||
| TMS320C6654SGZH8 | Texas Instruments | Digital Signal Processor, 0-Ext Bit, CMOS, PBGA625 | 7,283 | |||
| W1206-602013/BCM94554SV_V10 | Broadcom Limited | 5,482 | ||||
| TMS320C6654SCZHL8 | Texas Instruments | Digital Signal Processor, 0-Ext Bit, CMOS, PBGA625 | 4,165 | |||
| TMS320C6654SGZHL8 | Texas Instruments | Digital Signal Processor, 0-Ext Bit, CMOS, PBGA625 | 3,541 | |||
| TMS320C6654SCZHA8 | Texas Instruments | Digital Signal Processor, 0-Ext Bit, CMOS, PBGA625 | 3,127 | |||
![]() Win Source Electronics | SBAT54SLT1G | onsemi | Dual Series Schottky Barrier Diodes RoHS : Compliant |
| 600,000 | |
BAT54S-QR![]() | Nexperia | DIODE ARR SCHOTTKY 30V TO-236AB RoHS : Compliant |
| 316,000 | ||
| BAT54SWQ-7-F | Diodes Incorporated | DIODE ARRAY SCHOTTKY 30V SOT323 RoHS : Compliant |
| 304,000 | ||
| RCLAMP0554S.TCT | Semtech Corporation | TVS DIODE 5VWM 15VC SOT23-6 RoHS : Compliant |
| 102,000 | ||
| BAT54SDW-7 | Diodes Incorporated | DIODE ARRAY SCHOTTKY 30V SOT363 RoHS : Not Compliant |
| 69,000 | ||
NSVBAT54SWT1G![]() | onsemi | DIODE ARRAY SCHOTTKY 30V SOT323 RoHS : Compliant |
| 66,905 | ||
| BAT54SDW | Diodes Incorporated | Sub-miniature Schottky Diodes & Arrays in RoHS : Not Compliant |
| 60,000 | ||
| BAT54SW-7-F | Diodes Incorporated | DIODE ARRAY SCHOTTKY 30V SOT323 RoHS : Compliant |
| 15,000 | ||
MCP1754ST-3302E/CB![]() | Microchip Technology Inc | IC REG LDO 3.3V 0.15A SOT23A-3 RoHS : Compliant |
| 9,000 | ||
| 854S058AGILFT | Renesas Electronics Corporation | IC CLK MULTPX 8:1 2.5GHZ 24TSSOP RoHS : Compliant |
| 6,220 | ||
MCP1754ST-5002E/DB![]() | Microchip Technology Inc | IC REG LDO 5V 0.15A SOT223-3 RoHS : Compliant |
| 4,000 | ||
BAT54SWF![]() | Nexperia | DIODE SCHOTTKY 30V 200MA SC70 / Diode Array 1 Pair Series Connection Schottky 30 V 200mA (DC) Surface Mount SC-70, SOT-323 RoHS : Compliant |
| 3,808 | ||
| ML54SD1AE | Nuvoton Technology Corp | 64KB FLASH, 4KB SRAM, 2 CHS OF S |
| 1,100 | ||
| P87C554SFAA | Nexperia | IC MCU 8BIT 16KB OTP 68PLCC |
| 346 | ||
SN54S38J![]() | Texas Instruments | Logic Gates Military 4-ch, 2-input, 4.5-V to 5.5-V bipolar NAND gates with open-collector outputs 14-CDIP -55 to 125 RoHS : Not Compliant |
| 20 | ||
![]() Wuhan P&S | SBAT54SLT1G | onsemi | RoHS : Compliant |
| 132,000 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |