| Electronic Components Datasheet Search |
|
564L-P20-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() ComSIT USA | 750311564 | Wurth Elektronik | AVAILABLE EU RoHS : Compliant | 447 | ||
DAC7564ICPWR![]() | Texas Instruments | AVAILABLE EU RoHS : Compliant | 1,115 | |||
| PCMT369FAU564 | AVAILABLE EU | 6,536 | ||||
| KTK56442 | AVAILABLE EU | 226 | ||||
| DMPE564J2ERS | AVAILABLE EU | 60,000 | ||||
| SG732BTTD564K | KOA CORP | AVAILABLE EU | 219,076 | |||
![]() GLYN GmbH & Co. KG | FM25640-TS-T-G | Shanghai Fudan Microelectronics Group Co Limited | EEPROM 64Kb SPI Serial 8-Pin TSSOP -40/+85øC | 30 | ||
![]() Interstate Connecting Components | 1-1564530-1 | TE Connectivity | RoHS : Compliant |
| 0 | |
| 1-456402-8 | TE Connectivity | CRIMPER WIRE .055 F RoHS : Compliant |
| 0 | ||
| 1-456407-3 | TE Connectivity | CRIMPER, WIRE .100 F RoHS : Compliant |
| 0 | ||
| CM6564-000 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYC81044/12-20-9-BARREL | 0 | |||
| 155641-0045 | ITT Interconnect Solutions | MKJ1B6F6-6SE | 0 | |||
| 155641-2034 | ITT Interconnect Solutions | MKJ1B6Z6-6PD | 0 | |||
| 155641-3051 | ITT Interconnect Solutions | MKJ1B6T6-4SF | 0 | |||
| 155642-3050 | ITT Interconnect Solutions | MKJ1B6T7-10PF | 0 | |||
| 155643-1510 | ITT Interconnect Solutions | MKJ1B6W9-4PB | 0 | |||
| 155644-2031 | ITT Interconnect Solutions | MKJ1B6Z13-37SD | 0 | |||
| 155645-0041 | ITT Interconnect Solutions | MKJ1B6F8-13SE | 0 | |||
| 155645-2030 | ITT Interconnect Solutions | MKJ1B6Z8-13PD | 0 | |||
| 155646-0040 | ITT Interconnect Solutions | MKJ1B6F10-26PE | 0 | |||
| 155647-1011 | ITT Interconnect Solutions | MKJ1B6W16-55SB | 0 | |||
| 155648-1010 | ITT Interconnect Solutions | MKJ1B6W17-85PB | 0 | |||
![]() PUI | 12.88564 | Geyer Electronic E K | RoHS : Compliant | 122,354 | ||
| 12.85640 | 45,978 | |||||
| 12.95648 | 27,000 | |||||
| 12.89564 | 4,955 | |||||
| 12.85641 | 3,010 | |||||
| 12.85648 | 3,000 | |||||
| 12.85649 | 1,000 | |||||
| 12.86564 | 880 | |||||
| 12.87564 | 396 | |||||
| 12.95564 | 70 | |||||
| 12.85644 | 30 | |||||
| 12.85564 | 23 | |||||
| 12.95644 | 20 | |||||
| 12.95641 | 10 | |||||
![]() Rutronik | CR21-564-JY | ASJ Holdings Limited | RC0805 560K 5% 0,125W TK100 RoHS : Compliant |
| 220,000 | |
| 86564520064LF | Amphenol Communications Solutions | Crimp Contact MALE AWG 20/24 RoHS : Compliant |
| 20,000 | ||
| CC0805KKX7R8BB564 | YAGEO Corporation | KC 560nF 0805 10% 25V X7R RoHS : Compliant |
| 12,000 | ||
| CR32-564-JL | ASJ Holdings Limited | RC1206 560K 5% 0,25W TK100 RoHS : Compliant |
| 5,000 | ||
| MAL215256478E3 | Vishay Intertechnologies | 152 4,7uF 400V 20% 10x16/5 RoHS : Compliant |
| 4,500 | ||
| CY9BF564LPMC1-G-JNE2 | Infineon Technologies AG | Cortex-M4 256K LQFP-64 105°C RoHS : Compliant |
| 1,600 | ||
| FM25640B-G | Infineon Technologies AG | FRAM SPI 64K x8 SOIC8 RoHS : Compliant |
| 388 | ||
| SP005956481 | Infineon Technologies AG | XMC71 Automation I/O Satellit RoHS : Compliant |
| 7 | ||
| Q65111A0564 | ams OSRAM Group | MICRO-SIDELED-GREEN 90MCD RoHS : Compliant |
| 5 | ||
![]() Avnet Silica | M95640-WMN6P![]() | STMicroelectronics | EEPROM 64 Kbit 8K x 8bit SPI 20 MHz SOIC 8 Pins (Alt: M95640-WMN6P) RoHS : Compliant | 14,500 | ||
| NVDMX25U25645GXDI00 | Macronix International Co Ltd | (Alt: MX25U25645GXDI00/TRAY) RoHS : Compliant | 11,520 | |||
M95640-DFMN6TP![]() | STMicroelectronics | (Alt: M95640-DFMN6TP) RoHS : Compliant | 10,000 | |||
MCP6564-E/SL![]() | Microchip Technology Inc | Comparator Quad RR IP 55V 14Pin SOIC N (Alt: MCP6564-E/SL) RoHS : Compliant | 5,529 | |||
| M95640-DRDW8TP/K | STMicroelectronics | EEPROM 64 Kbit 8K x 8bit SPI 20 MHz TSSOP 8 Pins (Alt: M95640-DRDW8TP/K) RoHS : Compliant | 4,000 | |||
CAT25640HU4I-GT3![]() | onsemi | EEPROM Serial 64Kb SPI ONSSPCEPRMIK9M8T (Alt: CAT25640HU4I-GT3) RoHS : Compliant | 3,000 | |||
| MX25L25645GZ2I-10G | Macronix International Co Ltd | CMOS MXSMIO Serial Multi IO Flash Memory 256Mb Capacity 256M x 1128M x 264M x 4 Organization 3 (Alt: MX25L25645GZ2I-10G/TRAY) RoHS : Compliant | 2,880 | |||
AT25640B-SSHL-B![]() | Microchip Technology Inc | (Alt: AT25640B-SSHL-B) RoHS : Compliant | 2,800 | |||
| TSX564AIPT | STMicroelectronics | OP Amp Quad GP RR IP 16V 14Pin TSSOP TR (Alt: TSX564AIPT) RoHS : Compliant | 2,500 | |||
M95640-RMN6TP![]() | STMicroelectronics | (Alt: M95640-RMN6TP) RoHS : Compliant | 2,500 | |||
| M95640-DRMF3TG/K | STMicroelectronics | EEPROM SerialSPI 64Kbit 8K x 8 25V33V5V 8Pin WFDFPN TR (Alt: M95640-DRMF3TG/K) RoHS : Compliant | 2,500 | |||
| MX25L25645GM2I-10G/TUBE | Macronix International Co Ltd | (Alt: MX25L25645GM2I-10G/TUBE) RoHS : Compliant | 644 | |||
| SPC5643LF2MLQ1 | NXP Semiconductors | MCUApplication Specific 32BIT POWER 120MHz 128 KB RAM1MB Program 3V36Vin LQFP144 (Alt: SPC5643LF2MLQ1) RoHS : Compliant | 480 | |||
| MX25UM25645GXDI00/TRAY | Macronix International Co Ltd | AC 9C MIXED SKT RECP (Alt: MX25UM25645GXDI00/TRAY) RoHS : Compliant | 480 | |||
| SPC5642AF2MLU1 | NXP Semiconductors | MCU 32Bit MPC56xx e200z4 RISC 2048KB Flash 12V33V5V 176Pin LQFP Brick (Alt: SPC5642AF2MLU1) RoHS : Compliant | 80 | |||
![]() Braemac Americas-Symmetry | EC5645ETTTS-24.000M TR | Abracon Corporation |
| 0 | ||
| EC5645ETTTS-32.000M TR | Abracon Corporation |
| 0 | |||
| LI-OV5640-MIPI-AF V2.2 | Leopard Imaging | 36.25 (L) x 8.50 (W) x 5.50 (H) mm Module |
| 0 | ||
| HAL1564SU-A | TDK Micronas GmbH | SOT-23 - 2 wire Hall Switch (Tj -40 C to 170 C), MOQ =20K |
| 0 | ||
| EC5645ETTTS-25.000M TR | Abracon Corporation | Standard Clock Oscillator 25.000MHz SMD 2.0mm x 2.5mm 50ppm -40 C to +85 C |
| 0 | ||
| RCG-VI-S2564-SW | Runcore Innovation Technology Co Ltd | RCG-VI-S2564-SW |
| 0 | ||
| 410564 | Septentrio NV | AsteRx RBi3 Pro+ |
| 0 | ||
![]() Flip Electronics | FAN5640S7X | onsemi | Stock, Ship Today RoHS : Compliant |
| 36,000 | |
| NV25640DWVLT3G | onsemi | Stock, Ship Today RoHS : Compliant |
| 24,000 | ||
| SPC5644CF0MLT1R | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 5,606 | ||
| R5F564MLCDLJ#21 | Renesas Electronics Corporation | Stock RoHS : Compliant | 2,515 | |||
| R5F564MFDDFP#11 | Renesas Electronics Corporation | Stock RoHS : Compliant | 2,160 | |||
| R5F564MLHDLK#21 | Renesas Electronics Corporation | Stock RoHS : Compliant | 1,532 | |||
| SPC5643LF2MLQ8 | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 436 | ||
| R5F564MJCDFP#31 | Renesas Electronics Corporation | Stock RoHS : Compliant | 250 | |||
| R5F564MJHGFB#V1 | Renesas Electronics Corporation | Stock RoHS : Compliant | 215 | |||
| R5F564MGCGFB#V1 | Renesas Electronics Corporation | Stock RoHS : Compliant | 215 | |||
| R5F564MGHDFP#31 | Renesas Electronics Corporation | Stock RoHS : Compliant | 205 | |||
| SPC5645BF0VLU1 | NXP Semiconductors | Stock RoHS : Compliant | 200 | |||
| R5F564MFDGFP#V1 | Renesas Electronics Corporation | Stock RoHS : Compliant | 173 | |||
| R5F564MGGGFP#V1 | Renesas Electronics Corporation | Stock RoHS : Compliant | 173 | |||
| 05-25642-01 | Broadcom Limited | Stock, Ship Today |
| 110 | ||
![]() Pasternack Enterprises US | PE3564-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. BNC Male to Straight Cut Lead Cable 12 Inch Length Using RG178 Coax., Radio frequency assembly BNC male to straight cut lead cable 12 inch length using RG178 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC male to straight cut lead cable 12 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to straight cut lead cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and straight cut lead cable connection on the other. Our BNC to straight cut lead cable assembly has male gender on end 1 and sexless on end 2. PE3564-12 can also be known as a BNC plug to straight cut lead sexless cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.400 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. BNC plug to straight cut lead sexless cable assembly PE3564-12 is built with RG178 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to straight cut lead cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3564-12 RF cable are available on our downloadable PDF datasheet.PE3564-12 can also be used in the other direction and will be straight cut lead sexless to BNC male cable assembly if the opposite connectivity is required. BNC plug to straight cut lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to straight cut lead cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC RF cable assembly as per your requirements. |
| 1,711 | |
| PE39564-150CM | Pasternack Enterprises |
| 1,283 | |||
| PE3W05648LF/HS-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. MCX Plug Right Angle to SMA Male Low Loss Cable 100 cm Length Using PE-C100-LSZH Coax with HeatShrink, LF Solder., Radio frequency assembly MCX plug right angle to SMA male low loss cable 100 cm length using PE-C100-LSZH coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The MCX plug right angle to SMA male low loss cable 100 cm length using PE-C100-LSZH coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MCX to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with right angle a MCX cable connection on one end and a SMA cable connection on the other. Our low loss right angle a MCX to a SMA cable assembly has plug gender on end 1 and male on end 2. PE3W05648LF/HS-100CM can also be known as a low loss right angle MCX male to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W05648LF/HS-100CM RF cable has a LSZH jacket of 0.109-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 60 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. MCX male to SMA plug cable assembly PE3W05648LF/HS-100CM is built with PE-C100-LSZH which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with right angle MCX to SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W05648LF/HS-100CM can also be used in the other direction and will be SMA male to right angle MCX plug cable assembly if the opposite connectivity is required. Low loss MCX right angle male to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MCX to SMA cable assembly for quick shipment worldwide. Variations of MCX and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX to SMA low loss RF cable assembly as per your requirements. |
| 1,171 | ||
| PE3W05647/HS-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 120 inches. N Male Right Angle to N Male Low Loss Cable 120 Inch Length Using LMR-400-UF Coax with HeatShrink., Radio frequency assembly N male right angle to N male low loss cable 120 inch length using LMR-400-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to N male low loss cable 120 inch length using LMR-400-UF coax with heatshrink, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle type N cable connection on one end and type N cable connection on the other. Our low loss right angle N type to type N cable assemblies have a male gender on end 1 and male on end 2. PE3W05647/HS-120 can also be known as a low loss right angle type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to N type plug cable assembly PE3W05647/HS-120 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this type N right angle male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W05647/HS-120 can also be used in the other direction and will be type N male to right angle type N male cable assembly if the opposite connectivity is required. Low loss N type right angle plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to N male low loss cable 120 inch length using LMR-400-UF coax with heatshrink. |
| 313 | ||
| PE3C8564/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, RF Cable Part Number: LMR-200-UF, RF Cable Type: LMR-200-UF, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Female Bulkhead to SMA Male Right Angle Low Loss Cable 24 Inch Length Using LMR-200-UF Coax with HeatShrink., Radio frequency assembly N female bulkhead to SMA male right angle low loss cable 24 inch length using LMR-200-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N female bulkhead to SMA male right angle low loss cable 24 inch length using LMR-200-UF coax with heatshrink, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N bulkhead cable connection on one end and right angle SMA cable connection on the other. Our low loss type N to right angle SMA cable assemblies have a female gender on end 1 and male on end 2. PE3C8564/HS-24 can also be known as a low loss type N jack to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. Type N jack to SMA plug cable assembly PE3C8564/HS-24 is built with LMR-200-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency type N female bulkhead to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8564/HS-24 can also be used in the other direction and will be right angle SMA male to type N female bulkhead cable assembly if the opposite connectivity is required. Low loss N type jack bulkhead to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female bulkhead to SMA male right angle low loss cable 24 inch length using LMR-200-UF coax with heatshrink. |
| 42 | ||
| PE356-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P141, RF Cable Type: PE-P141, RF Cable Impedance: 50 Ohm, Length: 48 inches. SMA Female to N Male Precision Cable 48 Inch Length Using PE-P141 Coax, RoHS., Radio frequency assembly SMA female to N male precision cable 48 inch length using PE-P141 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female to N male precision cable 48 inch length using PE-P141 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax precision cable assembly is built with SMA cable connection on one end and N type cable connection on the other. Our precision SMA to type N cable assemblies have a female gender on end 1 and male on end 2. This SMA to type N cable is a female to male coax assembly, PE356-48, can also be known as a precision SMA jack to type N plug cable assembly and will be shipped same-day as it is purchased. SMA jack to N type plug cable assembly PE356-48 is built with PE-P141 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 18 GHz maximum frequency SMA female to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE356-48 can also be used in the other direction and will be type N male to SMA female cable assembly if the opposite connectivity is required. Precision SMA jack to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to N male precision cable 48 inch length using PE-P141 coax, RoHS. |
| 23 | ||
| PE3C5640LF-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 2.4mm Male to 2.4mm Male Cable 12 Inch Length Using PE-SR405AL Coax, LF Solder., Radio frequency assembly 2.4mm male to 2.4mm male cable 12 inch length using PE-SR405AL coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm male cable 12 inch length using PE-SR405AL coax, LF solder, 2.4mm cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to 2.4mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.4mm cable connection on one end and 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assemblies have a male gender on end 1 and male on end 2. PE3C5640LF-12 can also be known as a 2.4mm plug to 2.4mm plug cable assembly and will be shipped same-day as it is purchased. 2.4mm plug to 2.4mm plug cable assembly PE3C5640LF-12 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 40 GHz maximum frequency 2.4mm male to 2.4mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 2.4mm plug to 2.4mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.4mm male to 2.4mm male cable 12 inch length using PE-SR405AL coax, LF solder. |
| 20 | ||
| PE3MP2456-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRS SUBMINIATURE, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 48 inches. TRS Subminiature Plug with Blunt Cut for 78 Ohm PE-30-02003, 48" Cable., Radio frequency assembly TRS subminiature plug with blunt cut for 78 Ohm PE-30-02003, 48" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRS subminiature plug with blunt cut for 78 Ohm PE-30-02003, 48" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRS SUBMINIATURE to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRS SUBMINIATURE cable connection on one end and blunt cut cable connection on the other. Our 1553 TRS SUBMINIATURE to blunt cut cable assemblies have a plug gender on end 1 and genderless on end 2. PE3MP2456-48 can also be known as a 1553 TRS SUBMINIATURE male to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRS SUBMINIATURE male to blunt cut genderless cable assembly PE3MP2456-48 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRS SUBMINIATURE cable assembly is manufactured with TRS SUBMINIATURE to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRS SUBMINIATURE plug to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2456-48 can also be used in the other direction and will be blunt cut genderless to TRS SUBMINIATURE plug cable assembly if the opposite connectivity is required. 1553 TRS SUBMINIATURE male to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRS SUBMINIATURE to blunt cut cable assembly for quick shipment worldwide. Variations of TRS SUBMINIATURE cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRS subminiature plug with blunt cut for 78 Ohm PE-30-02003, 48" cable. |
| 4 | ||
| PE3C5646 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-LLPL, RF Cable Type: LMR-195-LLPL, RF Cable Impedance: 50 Ohm. BNC Male to TNC Male Cable Using LMR-195-LLPL Coax., Radio frequency assembly BNC male to TNC male cable using LMR-195-LLPL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to TNC male cable using LMR-195-LLPL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and TNC cable connection on the other. Our BNC to TNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to TNC cable is a male to male coax assembly, PE3C5646, can also be known as a BNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to TNC plug cable assembly PE3C5646 is built with LMR-195-LLPL which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency BNC male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5646 can also be used in the other direction and will be TNC male to BNC male cable assembly if the opposite connectivity is required. BNC plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to TNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to TNC male cable using LMR-195-LLPL coax. | 0 | |||
| PE3W05642/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. N Female Bulkhead to Reverse Polarity SMA Female Bulkhead Cable Using RG58 Coax with HeatShrink. PE3W05642/HS is a N female bulkhead to reverse polarity SMA female bulkhead cable using RG58 coax. This Pasternack N female bulkhead to reverse polarity SMA female bulkhead cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. Our female N bulkhead to reverse polarity female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W05642/HS N female bulkhead to SMA reverse polarity female bulkhead cable assembly is constructed with RG58 coax. | 0 | |||
| PE3W06756-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG8A/U, RF Cable Type: RG8, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. HN Male to SC Male Cable 48 Inch Length Using RG8 Coax., Radio frequency assembly HN male to SC male cable 48 inch length using RG8 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The HN male to SC male cable 48 inch length using RG8 coax, HN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HN to SC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with HN cable connection on one end and SC cable connection on the other. Our HN to SC cable assemblies have a male gender on end 1 and male on end 2. PE3W06756-48 can also be known as a HN plug to SC plug cable assembly and will be shipped same-day as it is purchased. HN plug to SC plug cable assembly PE3W06756-48 is built with RG8 which is a flexible coax type. The Pasternack flexible HN cable assembly is manufactured with HN to SC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency HN male to SC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06756-48 can also be used in the other direction and will be SC male to HN male cable assembly if the opposite connectivity is required. HN plug to SC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HN to SC cable assembly for quick shipment worldwide. Variations of HN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this HN male to SC male cable 48 inch length using RG8 coax. |
| 0 | ||
| PE3W15643 | Pasternack Enterprises | Key Specifications, Connector Series 1: MC-Card, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. MC-Card Plug to TNC Male Cable Using RG316 Coax. PE3W15643 is a MC-Card plug to TNC male cable using RG316 coax. This Pasternack MC-Card plug to TNC male cable assembly uses a 50 Ohm MC-Card for connector 1 and a 50 Ohm TNC for connector 2. Our plug MC-Card to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W15643 MC-Card plug to TNC male cable assembly is constructed with RG316 coax. | 0 | |||
| PE3W22564 | Pasternack Enterprises | Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. Plug to Reverse Polarity TNC Female Bulkhead Cable Using LMR-100 Coax. PE3W22564 is a FAKRA plug to reverse polarity TNC female bulkhead cable using LMR-100A coax. This Pasternack FAKRA plug to reverse polarity TNC female bulkhead cable assembly uses a 50 Ohm FAKRA for connector 1 and a 50 Ohm TNC for connector 2. Our plug FAKRA to reverse polarity female TNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W22564 FAKRA plug to TNC reverse polarity female bulkhead cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE91564 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 27 GHz, Adapter Body Style: Miter Right Angle, Connector Body Material 1: Passivated Stainless Steel, Connector Body Material 2: Passivated Stainless Steel. 2.92mm Male to SMA Female Miter Right Angle Adapter, DC to 27 GHz. 2.92mm adapter PE91564 is one of over 40,000 available RF, microwave and millimeter wave components from Pasternack. Our 2.92mm to SMA adapter is a in-series coaxial adapter design. This 50 Ohm 2.92mm adapter is precision manufactured to RF components industry specifications and has a maximum frequency of 27 GHz. 2.92mm male to SMA female adapter is one of the many RF components that ship same day as they are ordered. PE91564 male 2.92mm to female SMA adapter has a miter right angle body. Our male 2.92mm to female SMA adapter PE91564 is shipped from our facility certified to ISO 9001:2015 the same day as purchased. This dc to 27 GHz 2.92mm to SMA radio frequency adapter is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 0 | ||
| PE35256-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C200, RF Cable Type: PE-C200, RF Cable Impedance: 50 Ohm, Length: 48 inches. BNC Male to BNC Male Cable 48 Inch Length Using PE-C200 Coax., Radio frequency assembly BNC male to BNC male cable 48 inch length using PE-C200 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. BNC male to BNC male cable 48 inch length using PE-C200 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our low loss BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE35256-48, can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE35256-48 is built with PE-C200 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 48 inch length using PE-C200 coax. |
| 0 | ||
![]() Teledyne HiRel | 5962-9056401MA![]() | Teledyne HiRel | CONTROLLER, 8-BIT, HIGH-PERFORMANCE, WITH 16K BYTES EPROM PROGRAM MEMORY RoHS : Not Compliant | 0 | ||
5962-9056402MA![]() | Teledyne HiRel | CONTROLLER, 8-BIT, HIGH=PERFORMANCE, WITH 16K BYTES EPROM PROGRAM MEMORY RoHS : Not Compliant | 0 | |||
5962-9056402XA![]() | Teledyne HiRel | CONTROLLER, 8-BIT, HIGH=PERFORMANCE, WITH 16K BYTES EPROM PROGRAM MEMORY RoHS : Not Compliant | 0 | |||
5962-9056401XA![]() | Teledyne HiRel | CONTROLLER, 8-BIT, HIGH-PERFORMANCE, WITH 16K BYTES EPROM PROGRAM MEMORY RoHS : Not Compliant | 0 | |||
![]() Venkel Ltd. | TFCR1206-8W-K-1564DT | VENKEL LTD | Thin Film CR;1206;1/8W;�100PPM;1.56M;�0.5% RoHS : Compliant | 0 | ||
| TFCR2512-2W-E-1564FT-1K | VENKEL LTD | Thin Film CR;2512;1/2W;�25PPM;1.56M;�1% RoHS : Compliant | 0 | |||
| SWCR0805-VK-564JT | VENKEL LTD | Surge Withstanding CR;0805;1/2W;�100PPM;560K;�5% RoHS : Compliant | 0 | |||
| SWCR2010-YK-564MT | VENKEL LTD | Surge Withstanding CR;2010;1.25W;�100PPM;560K;�20% RoHS : Compliant | 0 | |||
| TFCR2512-2W-K-1564CT-1K | VENKEL LTD | Thin Film CR;2512;1/2W;�100PPM;1.56M;�0.25% RoHS : Compliant | 0 | |||
| TFCR0805-10W-K-1564FT | VENKEL LTD | Thin Film CR;0805;1/10W;�100PPM;1.56M;�1% RoHS : Compliant | 0 | |||
| TFCR1206-8W-E-1564FT-1K | VENKEL LTD | Thin Film CR;1206;1/8W;�25PPM;1.56M;�1% RoHS : Compliant | 0 | |||
| TFCR1210-4W-K-1564FT | VENKEL LTD | Thin Film CR;1210;1/4W;�100PPM;1.56M;�1% RoHS : Compliant | 0 | |||
| TFCR2512-2W-C-1564FT-1K | VENKEL LTD | Thin Film CR;2512;1/2W;�50PPM;1.56M;�1% RoHS : Compliant | 0 | |||
| TFCR2512-2W-E-1564CT-1K | VENKEL LTD | Thin Film CR;2512;1/2W;�25PPM;1.56M;�0.25% RoHS : Compliant | 0 | |||
| HPCR0805-U-564JT | VENKEL LTD | High Power CR;0805;1/3W;560K;�5% RoHS : Compliant | 0 | |||
| PWCR1206-WK-564JT | VENKEL LTD | Pulse Withstanding CR;1206;3/4W;�100PPM;560K;�5% RoHS : Compliant | 0 | |||
| CRG2010-V-564JT | VENKEL LTD | RoHS 10/10 Green CR;2010;1/2W;560K;�5% RoHS : Compliant | 0 | |||
| SWCR1206-VK-564KT | VENKEL LTD | Surge Withstanding CR;1206;1/2W;�100PPM;560K;�10% RoHS : Compliant | 0 | |||
| TFCR0805-10W-C-1564DT-1K | VENKEL LTD | Thin Film CR;0805;1/10W;�50PPM;1.56M;�0.5% RoHS : Compliant | 0 | |||
![]() Wuhan P&S | CAV25640VE-GT3![]() | onsemi | RoHS : Compliant |
| 87,000 | |
| 564R60GAT10 | Vishay Intertechnologies | 564R 6KVDC 100PF ��20% X5F BULK E3 RoHS : Compliant |
| 2,000 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |