 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
5867PVC Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 Avnet Americas | 1658670-1 | TE Connectivity | - Tape and Reel (Alt: 1658670-1) RoHS : Compliant |
| 80,000 | |
| 1658670-2 | TE Connectivity | D Sub Contact, AMPLIMITE HDP-22 Connectors, Pin (Male), Brass, Gold Plated Contacts, 22 AWG - Bag (Alt: 1658670-2) RoHS : Compliant |
| 32,014 | ||
| 1658670-4 | TE Connectivity | - Bulk (Alt: 1658670-4) RoHS : Compliant |
| 6,822 | ||
| 1658672-1 | TE Connectivity | D Sub Connector Housing, 44 Ways, High Density D Sub, 3, AMPLIMITE HDP-22, Plug, Steel Body - Bag (Alt: 1658672-1) RoHS : Compliant |
| 445 | ||
| 1658671-1 | TE Connectivity | - Bulk (Alt: 1658671-1) RoHS : Compliant |
| 434 | ||
| 1658674-1 | TE Connectivity | Conn Housing Plug 78 POS DD Shell Size 2.41mm Crimp ST Cable Mount - Bulk (Alt: 42K6697) RoHS : Compliant |
| 0 | ||
| 75867-130LF | Amphenol Corporation | - Bulk (Alt: 62K8085) RoHS : Compliant |
| 0 | ||
| 1658674-1 | TE Connectivity | Conn Housing Plug 78 POS DD Shell Size 2.41mm Crimp ST Cable Mount - Bag (Alt: 1658674-1) RoHS : Compliant |
| 0 | ||
| 1586768-8 | TE Connectivity | - Bag (Alt: 1586768-8) RoHS : Compliant |
| 0 | ||
| 2N5867 | Microchip Technology Inc | Transistor GP BJT PNP 60V 5A 2-Pin TO-3 - Bulk (Alt: 2N5867) RoHS : Not Compliant |
| 0 | ||
| R595867315 | Radiall | TERMINATED 4 PORTS BYPASS PLATINUM SMA2.9 40GHZ LATCHING SELF-CUT-OFF INDICATORS 15VDC POSITIVE CO - Bulk (Alt: R595867315) RoHS : Not Compliant |
| 0 | ||
| 120065-8671 | Molex | - Bulk (Alt: 1200658671) RoHS : Compliant | 0 | |||
| 1-1586768-4 | TE Connectivity | - Bag (Alt: 1-1586768-4) RoHS : Compliant |
| 0 | ||
| 958676-01-08-30 | 3M Interconnect | - Bulk (Alt: 7010348652) RoHS : Not Compliant |
| 0 | ||
| 1586768-2 | TE Connectivity | - Trays (Alt: 1586768-2) RoHS : Compliant |
| 0 | ||
 Newark | NTD5867NLT4G | onsemi | Mosfet, n Ch, w Diode,60V,20A, dpak; |Onsemi NTD5867NLT4G RoHS : Compliant |
| 27,005 | |
| NTD5867NLT4G | onsemi | Mosfet, n Ch, w Diode,60V,20A, dpak; |Onsemi NTD5867NLT4G RoHS : Compliant |
| 27,005 | ||
| 1658670-2 | TE Connectivity | Contact, Crimp, Pin, 28-22Awg; |Te Connectivity Amp 1658670-2 RoHS : Compliant |
| 22,381 | ||
| 75867-103LF | Amphenol Communications Solutions | Connector, Header, 16 Position, 2 Row; Connector Systems:Wire-To-Board; Pitch Spacing:2.54Mm; No. Of Rows:2Rows; No. Of Contacts:16Contacts; Contact Termination Type:Through Hole; Product Range:Fci Quickie Series Rohs Compliant: Yes RoHS : Compliant |
| 2,131 | ||
| 75867-105LF | Amphenol Communications Solutions | Wire-Board Connector, Header, 26 Positio; |Amphenol Communications Solutions 75867-105LF RoHS : Compliant |
| 1,729 | ||
| 1658674-1 | TE Connectivity | D Sub Shell, Plug, Size 5, Steel; No. Of Positions:78Positions; Connector Type:High Density D Sub; Connector Shell Size:Dd; Product Range:Amplimite Hdp-22 Series; Gender:Plug; Connector Body Material:Metal Body; Body Material:Steel Rohs Compliant: Yes RoHS : Compliant |
| 960 | ||
| 75867-130LF | Amphenol Communications Solutions | Conn, Header, 4Pos, 2Row, 2.54Mm; Connector Systems:Wire-To-Board; Pitch Spacing:2.54Mm; No. Of Rows:2Rows; No. Of Contacts:4Contacts; Contact Termination Type:Through Hole Right Angle; Product Range:Quickie 75867 Series Rohs Compliant: Yes RoHS : Compliant |
| 800 | ||
| 75867-105LF | Amphenol Communications Solutions | Connector, Header, 26Pos, 2Row, 2.54Mm; Connector Systems:Wire-To-Board; Pitch Spacing:2.54Mm; No. Of Rows:2Rows; No. Of Contacts:26Contacts; Contact Termination Type:Through Hole; Product Range:Fci Quickie 75867 Series Rohs Compliant: Yes RoHS : Compliant |
| 387 | ||
| 1658673-1 | TE Connectivity | Plug, D, High Density, 62Way; |Te Connectivity Amp 1658673-1 RoHS : Compliant |
| 267 | ||
| 1-1586768-4.. | TE Connectivity | Rectangular Pwr Conn, Header, 14Pos, Pcb; |Te Connectivity Amp 1-1586768-4.. RoHS : Compliant |
| 195 | ||
| 58672 | Brady Worldwide Inc | B946 2X4 Bk/Wt Acid Lbl For Hazcom Panel; |Brady 58672 RoHS : Not Compliant |
| 95 | ||
| 1586765-6 | TE Connectivity | Connector Housing, Rcpt, 6Ways; |Te Connectivity Amp 1586765-6 RoHS : Compliant |
| 52 | ||
| 1658670-3 | TE Connectivity | D-Sub Contact, , 28Awg-22Awg, Crimp; |Te Connectivity Amp 1658670-3 RoHS : Compliant |
| 35 | ||
| T5867ST | Stontronics | Power Supply, Ac-Ac Wallplug, 24V, 0.75A; |Stontronics T5867ST RoHS : Compliant |
| 18 | ||
| 11.04.5867 | Rotronic-Secomp AG | Cable Assy, Displayport Plug-Plug, 2M; |Roline 11.04.5867 RoHS : Compliant |
| 15 | ||
 RS | 1558676-3 (T9GS1L24-12) | TE Connectivity | POWER RELAY 12VDC CONTROL 160OHM SPST-NO 30A/250VAC QC TABS/THT T9G SERIES |
| 858 | |
| 1658674-1 | TE Connectivity | CONN D-SUB CABLE PLUG 78POS STR HDP-22SERIES CRIMPSNAP 22AWG METALSHELL RoHS : Compliant |
| 633 | ||
| 1558672-9 (T9GV2L24-110) | TE Connectivity | POWER RELAY 110VDC CONTROL 13444OHM SPST-NC 20A/250VAC QC TABS/THT T9G SERIES |
| 422 | ||
| 1558676-2 (T9GS1L24-9) | TE Connectivity | POWER RELAY 9VDC CONTROL 90OHM SPST-NO 30A/250VAC QC TABS/THT T9G SERIES |
| 420 | ||
| 1558672-3 (T9GV2L24-12) | TE Connectivity | POWER RELAY 12VDC CONTROL 160OHM SPST-NC 20A/250VAC QC TABS/THT T9G SERIES |
| 420 | ||
| 1558677-8 (T9GS2L24-48) | TE Connectivity | POWER RELAY 48VDC CONTROL 2560OHM SPST-NC 20A/250VAC QC TABS/THT T9G SERIES |
| 420 | ||
| 1558675-9 (T9GS5L24-110) | TE Connectivity | POWER RELAY 110VDC CONTROL 13444OHM SPDT 20A/250VAC QC TABS/THT T9G SERIES |
| 420 | ||
| 1558675-3 (T9GS5L24-12) | TE Connectivity | POWER RELAY 12VDC CONTROL 160OHM SPDT 20A/250VAC QC TABS/THROUGH HOLE T9G SERIES |
| 419 | ||
| 1558672-2 (T9GV2L24-9) | TE Connectivity | POWER RELAY 9VDC CONTROL 90OHM SPST-NC 20A/250VAC QC TABS/THT T9G SERIES |
| 418 | ||
| 1558670-2 (T9GV5L24-9) | TE Connectivity | POWER RELAY 9VDC CONTROL 90OHM SPDT 20A/250VAC QC TABS/THROUGH HOLE T9G SERIES |
| 411 | ||
| 1658675-1 | TE Connectivity | CONN D-SUB CABLE PLUG 15POS STR HDP-22SERIES CRIMPSNAP 22AWG SHIELDING HDWR KIT RoHS : Compliant |
| 322 | ||
| 1558676-1 (T9GS1L24-5) | TE Connectivity | POWER RELAY 5VDC CONTROL 28OHM SPST-NO 30A/250VAC QC TABS/THT T9G SERIES |
| 130 | ||
| 1558670-3 (T9GV5L24-12) | TE Connectivity | POWER RELAY 12VDC CONTROL 160OHM SPDT 20A/250VAC QC TABS/THROUGH HOLE T9G SERIES |
| 49 | ||
| 1858670 | RS Pro | CABLE TIE BLACK RELEASABLE 316 STAINLESS STEEL 420N 9.1 X 0.2 IN (230 X 5MM) |
| 1 | ||
| 5867 | Adafruit Industries | NOODS - FLEXIBLE LED FILAMENT - 24V 1.2M LONG - RED |
| 0 | ||
 Microchip Technology Inc | 2N5867 | Microchip Technology Inc | Power BJT _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | |
 Rochester Electronics | SA58672UK,027 | NXP Semiconductors | SA58672 - Audio Amplifier 3W 1 Channel(s), 1 Func RoHS : Compliant |
| 42 | |
| SVD5867NLT4G | onsemi | MOSFET N-Channel 60V 6A (Ta), 22A (Tc) TO-252-3 T/R RoHS : Compliant |
| 1,195 | ||
| NVD5867NLT4G | onsemi | MOSFET N-Channel 60V 6A (Ta), 22A (Tc) TO-252-3 T/R RoHS : Compliant |
| 31,548 | ||
| CY8C5867LTI-LP028 | Infineon Technologies AG | IC MCU ARM® Cortex®-M3 32Bit 1 Core FLASH 128kB (128k x 8) 67MHz 68-QFN Tray RoHS : Compliant |
| 125 | ||
| CY8C5867AXI-LP024 | Infineon Technologies AG | IC MCU ARM® Cortex®-M3 32Bit 1 Core FLASH 128kB (128k x 8) 67MHz 100-QFP Tray RoHS : Compliant |
| 111 | ||
CY8C5867AXI-LP024 | Cypress Semiconductor | IC MCU ARM® Cortex®-M3 32Bit 1 Core FLASH 128kB (128k x 8) 67MHz 100-QFP Tray RoHS : Compliant |
| 15 | ||
CY8C5867LTI-LP025 | Cypress Semiconductor | IC MCU ARM® Cortex®-M3 32Bit 1 Core FLASH 128kB (128k x 8) 67MHz 68-QFN Tray RoHS : Compliant |
| 1 | ||
 Sager | 1558671-8 | TE Connectivity | Industrial Relays T9GV1L24-48 RoHS : Compliant |
| 0 | |
| 1558676-3 | TE Connectivity | Industrial Relays T9GS1L24-12 RELAY T9G RoHS : Compliant |
| 0 | ||
| 1586768-8 | TE Connectivity | Headers & Wire Housings 8P VERT PIN HDR DUAL GLOW WIRE RoHS : Compliant |
| 0 | ||
| AP-GT5-2022/F45S-RG58(67) | Hirose Electric Co Ltd | Bench Top Tools HARNESS TOOL GT5 SERIES | 0 | |||
| 3-643586-7 | TE Connectivity | Headers & Wire Housings 07P MTA100 CONN ASSY W/O#4 RoHS : Compliant | 0 | |||
| 1558677-5 | TE Connectivity | Industrial Relays T9GS2L24-18 RoHS : Compliant |
| 0 | ||
| 1586765-4 | TE Connectivity | Headers & Wire Housings 4P RCPT DUAL F/H GLOW WIRE RoHS : Compliant |
| 0 | ||
| 1586776-2 | TE Connectivity | Pin & Socket Connectors 02P MINI UMNL INTRF SEAL SPCL | 0 | |||
| 1658674-1 | TE Connectivity | D-Sub High Density Connectors PLUG 78P GRND INDNTS RoHS : Compliant | 0 | |||
| 1658670-1 | TE Connectivity | D-Sub Contacts PIN 28-22 PHBZ/AU Reel of 20000 RoHS : Compliant |
| 0 | ||
| 5-867471-1 | TE Connectivity | Standard Circular Connector LGH RECPT W/FLY LEADS 6 PIN RoHS : Compliant | 0 | |||
| 1-1586768-4 | TE Connectivity | Headers & Wire Housings 14P VERT HDR DUAL GLOW WIRE RoHS : Compliant |
| 0 | ||
| AP-GT5-2022/F45P-RG58(67) | Hirose Electric Co Ltd | Bench Top Tools HARNESS TOOL GT5 SERIES | 0 | |||
| CX5867-000 | TE Connectivity | Circular MIL Spec Strain Reliefs & Adapters SLM54AB-1612A-25-0 RoHS : Not Compliant | 0 | |||
| 1558670-5 | TE Connectivity | Industrial Relays T9GV5L24-18 RoHS : Compliant |
| 0 | ||
 TME | 1586765-2 | TE Connectivity | Plug; female; VAL-U-LOK; PIN: 2; 4.2mm; straight; white; crimped RoHS : Compliant |
| 8,000 | |
8-1625867-0 | TE Connectivity | Resistor: thin film; 42.2Ω; 0603; 100mW; 1.55x0.8x0.45mm; 25ppm/°C RoHS : Compliant |
| 2,000 | ||
| 1558677-9 | TE Connectivity | Relay: electromagnetic; Ucoil: 110VDC; SPST-NC; Icontacts max: 20A RoHS : Compliant |
| 1,210 | ||
| 1558670-9 | TE Connectivity | Relay: electromagnetic; Ucoil: 110VDC; SPDT; Icontacts max: 20A RoHS : Compliant |
| 1,100 | ||
| 1-1625867-2 | TE Connectivity | Resistor: thin film; 2kΩ; 0603; 166mW; 1.55x0.8x0.55mm; -55÷155°C RoHS : Compliant |
| 1,000 | ||
| 1558677-8 | TE Connectivity | Relay: electromagnetic; Ucoil: 48VDC; SPST-NC; Icontacts max: 20A RoHS : Compliant |
| 830 | ||
| 1558672-8 | TE Connectivity | Relay: electromagnetic; Ucoil: 48VDC; SPST-NC; Icontacts max: 20A RoHS : Compliant |
| 790 | ||
| 1586765-6 | TE Connectivity | Connector: wire-board; plug; female; data; VAL-U-LOK; 600V; PIN: 6 RoHS : Compliant |
| 459 | ||
| 1558677-3 | TE Connectivity | Relay: electromagnetic; Ucoil: 12VDC; SPST-NC; Icontacts max: 20A RoHS : Compliant |
| 410 | ||
| 586710002 | Amphenol Corporation | 586710002 |
| 125 | ||
| 586710004 | Amphenol Corporation | 586710004 |
| 18 | ||
| 1658672-1 | TE Connectivity | Connector: D-Sub HD; PIN: 44; plug; male; data transfer; straight RoHS : Compliant |
| 0 | ||
| 75867-132LF | Amphenol Communications Solutions | Connector: IDC; socket; male; data; Quickie; PIN: 8; 2.54mm; 2x4; FCI RoHS : Compliant |
| 0 | ||
| 75867-104LF | Amphenol Communications Solutions | Connector: IDC; socket; male; data; PIN: 20; Quickie; angled 90°; THT RoHS : Compliant |
| 0 | ||
| 1358670000 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; male; power supply; 9.5A RoHS : Compliant |
| 0 | ||
 ComSIT USA | 75867103LF | Amphenol FCi | Board Connector, 16 Contact(s), 2 Row(s), Male, Right Angle, 0.1 inch Pitch, Solder Terminal, Locking, Blue Insulator RoHS : Compliant | 6,300 | ||
| 75867307LF | Amphenol FCi | Board Connector, 40 Contact(s), 2 Row(s), Male, Right Angle, 0.1 inch Pitch, Solder Terminal, Locking, Blue Insulator RoHS : Compliant | 300 | |||
| 75867101LF | Floeth Electronic Ltd | SHR. LP. HEADER RA DR TMT Board Connector, 10 Contact(s), 2 Row(s), Male, Right Angle, 0.1 inch Pitch, Solder Terminal, Locking, Blue Insulator RoHS : Compliant | 289 | |||
| 75867102LF | Amphenol FCi | SHR. LP. HEADER RA DR TMT Board Connector, 14 Contact(s), 2 Row(s), Male, Right Angle, 0.1 inch Pitch, Solder Terminal, Locking, Blue Insulator RoHS : Compliant | 197 | |||
| 75867302LF | Amphenol FCi | SHR. LP. HEADER RA DR TMT Board Connector, 14 Contact(s), 2 Row(s), Male, Right Angle, 0.1 inch Pitch, Solder Terminal, Locking, Blue Insulator RoHS : Compliant | 115 | |||
 PEI Genesis | 75867-101LF | Amphenol FCi | RoHS : Compliant |
| 4,350 | |
| 11472586-7 | SOURIAU-SUNBANK |
| 0 | |||
| 23A02586-7 | SOURIAU-SUNBANK |
| 0 | |||
| 158679-0188 | SOURIAU-SUNBANK |
| 0 | |||
| 75867-102LF | Amphenol FCi | RoHS : Compliant |
| 0 | ||
 Chip 1 Exchange | 1658670-1 | TE Connectivity | INSTOCK RoHS : Compliant | 26,142 | ||
| 15358672 | INSTOCK | 12,175 | ||||
| 1658671-1 | TE Connectivity | INSTOCK RoHS : Compliant | 1,661 | |||
| 75867-331 | DUP | INSTOCK | 990 | |||
| SN755867PZP | INSTOCK | 979 | ||||
| CX380D5-5867 | Crydom Inc | INSTOCK | 790 | |||
| 340-265867-REEL | INSTOCK | 250 | ||||
| NTD5867NL-1G | INSTOCK | 155 | ||||
| CY8C5867LTI-LP028 | INFICN | INSTOCK | 122 | |||
| 1658670-2 | INSTOCK | 42 | ||||
| 75867-101LF | INSTOCK | 9 | ||||
 Avnet Abacus | 1658670-1 | TE Connectivity | D Sub Contact HDP22 Pin Brass Gold Plated Contacts 22 AWG 28 AWG (Alt: 1658670-1) RoHS : Compliant | 140,000 | ||
| 1658670-2 | TE Connectivity | D Sub Contact AMPLIMITE HDP22 Connectors Pin Male Brass Gold Plated Contacts 22 AWG (Alt: 1658670-2) RoHS : Compliant | 79,000 | |||
| 5-867052-1 | TE Connectivity | Contact Socket Crimp ST Cable Mount (Alt: 5-867052-1) RoHS : Compliant | 14,000 | |||
| 75867-103LF | Amphenol Corporation | Conn Shrouded Header 16 POS 254mm Solder RA Through Hole (Alt: 75867-103LF) RoHS : Compliant | 12,600 | |||
| 75867-104LF | Amphenol Corporation | Conn Shrouded Header 20 POS 254mm Solder RA Through Hole (Alt: 75867-104LF) RoHS : Compliant | 7,560 | |||
| 75867-102LF | Amphenol Corporation | Conn Shrouded Header HDR 14 POS 254mm Solder RA ThruHole Tube (Alt: 75867-102LF) RoHS : Compliant | 6,693 | |||
| 75867-132LF | Amphenol Corporation | Pin Header WiretoBoard 254 mm 2 Rows 8 Contacts Through Hole Straight FCI Quickie Series (Alt: 75867-132LF) RoHS : Compliant | 3,700 | |||
| 1558676-3 | TE Connectivity | Power Relay SPSTNO 480VAC 12VDC Through Hole BoxTube (Alt: 1558676-3) RoHS : Compliant | 3,040 | |||
| 1658671-1 | TE Connectivity | D Sub Connector Housing 26 Ways High Density D Sub 2 AMPLIMITE HDP22 Plug Steel Body (Alt: 1658671-1) RoHS : Compliant | 2,800 | |||
| 1658671-1 | TE Connectivity | D Sub Connector Housing 26 Ways High Density D Sub 2 AMPLIMITE HDP22 Plug Steel Body (Alt: 1658671-1) RoHS : Compliant | 2,400 | |||
| 75867-131LF | Amphenol Corporation | Conn Shrouded Header 6 POS 254mm Solder RA Through Hole (Alt: 75867-131LF) RoHS : Compliant | 2,400 | |||
| 1658672-1 | TE Connectivity | D Sub Connector Housing 44 Ways High Density D Sub 3 AMPLIMITE HDP22 Plug Steel Body (Alt: 1658672-1) RoHS : Compliant | 800 | |||
| 75867-101LF | Amphenol Corporation | Conn Shrouded Header 10 POS 254mm Solder RA Through Hole (Alt: 75867-101LF) RoHS : Compliant | 174 | |||
| 1558676-3 | TE Connectivity | Power Relay SPSTNO 480VAC 12VDC Through Hole BoxTube (Alt: 1558676-3) RoHS : Compliant | 0 | |||
| 1586768-8 | TE Connectivity | Conn Power HDR 8 POS 42mm Solder ST ThruHole 8 Terminal 1 Port Tray (Alt: 1586768-8) RoHS : Compliant | 0 | |||
Avnet Asia | SVD5867NLT4G | onsemi | Single N-Channel Power MOSFET 60V, 22A, 39mO (Alt: SVD5867NLT4G) RoHS : Compliant | 0 | ||
| 1586768-6 | TE Connectivity | (Alt: 1586768-6) RoHS : Compliant |
| 0 | ||
| 75867-131LF | Amphenol Corporation | Conn Shrouded Header 6 POS 2.54mm Solder RA Through Hole (Alt: 75867-131LF) RoHS : Compliant | 0 | |||
| 1586774-1 | TE Connectivity | (Alt: 1586774-1) RoHS : Compliant | 0 | |||
| 75867-301LF | Amphenol Corporation | (Alt: 75867-301LF) RoHS : Compliant | 0 | |||
| 1658670-1 | TE Connectivity | (Alt: 1658670-1) RoHS : Compliant | 0 | |||
| 1558676-3 | TE Connectivity | (Alt: 1558676-3) RoHS : Compliant | 0 | |||
| 1625867-2 | TE Connectivity | SMD Chip Resistor, 10 kOhm, ? 0.1%, 100 mW, 0603 [1608 Metric], Thin Film, Precision High Power (Alt: 1625867-2) RoHS : Compliant | 0 | |||
| 1658676-1 | TE Connectivity | Conn Housing PL 26 POS 2.28mm Crimp ST Bulk (Alt: 1658676-1) RoHS : Compliant | 0 | |||
| 5-1625867-0 | TE Connectivity | (Alt: 5-1625867-0) RoHS : Compliant | 0 | |||
| 5-1625867-6 | TE Connectivity | SMD Chip Resistor, 23.2 Ohm, ? 0.1%, 4/25 W, 0603 [1608 Metric], Thin Film, High Power Precision (Alt: 5-1625867-6) RoHS : Compliant | 0 | |||
| 1558670-6 | TE Connectivity | (Alt: 1558670-6) RoHS : Compliant | 0 | |||
| 1658672-1 | TE Connectivity | D Sub Connector Housing, 44 Ways, High Density D Sub, 3, AMPLIMITE HDP-22, Plug, Steel Body (Alt: 1658672-1) RoHS : Compliant |
| 0 | ||
| 4-1625867-9 | TE Connectivity | SMD Chip Resistor, 19.6 Ohm, ? 0.1%, 4/25 W, 0603 [1608 Metric], Thin Film, High Power Precision (Alt: 4-1625867-9) RoHS : Compliant | 0 | |||
 Avnet Silica | SVD5867NLT4G | onsemi | Single NChannel Power MOSFET 60V 22A 39mO (Alt: SVD5867NLT4G) RoHS : Compliant | 0 | ||
 Braemac Americas-Symmetry | AFAC5867-S698 | Abracon Corporation | RF ANT 4G/LTE FLEX PRINTED RoHS : Compliant |
| 0 | |
 Component Electronics, Inc | 1658672-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 556 | |
| 1658671-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 102 | ||
| 1437586-7 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 50 | ||
| NTD5867NLT4G | onsemi | IN STOCK SHIP TODAY RoHS : Compliant |
| 23 | ||
| 205867-1 | TE Connectivity | IN STOCK SHIP TODAY |
| 9 | ||
| 75867-101LF | Amphenol FCi | IN STOCK SHIP TODAY RoHS : Compliant |
| 4 | ||
 EBV Elektronik | SVD5867NLT4G | onsemi | Single NChannel Power MOSFET 60V 22A 39mO (Alt: SVD5867NLT4G) RoHS : Compliant | 0 | ||
| CY8C5867LTI-LP028 | Infineon Technologies AG | MCU 32Bit PSoC ARM Cortex M3 RISC 128KB Flash 25V33V5V 68Pin QFN Tray (Alt: SP005656011) RoHS : Compliant | 0 | |||
| CY8C5867AXI-LP024 | Infineon Technologies AG | MPU PSoC RISC 32Bit 67MHz 18V33V5V 100Pin TQFP Tray (Alt: SP005656007) RoHS : Compliant | 0 | |||
| CY8C5867LTI-LP025 | Infineon Technologies AG | MCU 32Bit PSoC ARM Cortex M3 RISC 128KB Flash 25V33V5V 68Pin QFN Tray (Alt: SP005656009) RoHS : Compliant | 0 | |||
 Master Electronics | 1658674-1 | TE Connectivity | HDP-22 PLUG SIZE 5 78 POSN RoHS : Compliant |
| 6,566 | |
| 1586765-4 | TE Connectivity | 4P RCPT VAL-U-LOK GW RoHS : Compliant |
| 1,751 | ||
| 1558671-8 | TE Connectivity | T9GV1L24-48 RoHS : Compliant |
| 0 | ||
| 1586768-8 | TE Connectivity | 8P VERT HDR VAL-U-LOK GW RoHS : Compliant |
| 0 | ||
| 1625867-4 | TE Connectivity | RP 1J 0.166W 205R 0.1% 25PPM 1K RL RoHS : Compliant |
| 0 | ||
| 2N5867 | Microchip Technology Inc | Transistor - PNP Silicon - Power - 60V - 5A - ~4 MHz RoHS : Compliant |
| 0 | ||
| 3-1625867-6 | TE Connectivity | RP 1J 0.166W 14R3 0.1% 25PPM 1K RL RoHS : Compliant |
| 0 | ||
| 3-643586-7 | TE Connectivity | 07P MTA100 CONN ASSY W/O#4 RoHS : Compliant |
| 0 | ||
| 2-1625867-7 | TE Connectivity | RP 1J 0.166W 11R5 0.1% 25PPM 1K RL RoHS : Compliant |
| 0 | ||
| 2-1625867-8 | TE Connectivity | RP 1J 0.166W 11R8 0.1% 25PPM 1K RL RoHS : Compliant |
| 0 | ||
| 1558677-5 | TE Connectivity | T9GS2L24-18 MOQ Reduction RoHS : Compliant |
| 0 | ||
| 1558677-5 | TE Connectivity | T9GS2L24-18 MOQ Reduction RoHS : Compliant |
| 0 | ||
| 1-1625867-5 | TE Connectivity | RP 1J 0.166W 1K24 0.1% 25PPM 1K RL RoHS : Compliant |
| 0 | ||
| 1-1586768-4 | TE Connectivity | Conn Power HDR 14 POS 4.2mm Solder ST Thru-Hole 14 Terminal 1 Port Box/Tray MOQ Reduction RoHS : Compliant |
| 0 | ||
| 1-1625867-0 | TE Connectivity | RP 1J 0.166W 2K1 0.1% 25PPM 1K RL RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3C5867 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm. Plenum 7/16 DIN Male to QMA Male Low PIM Cable Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum 7/16 DIN male to QMA male low PIM cable using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 7/16 DIN male to QMA male low PIM cable using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to QMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 7/16 DIN cable connection on one end and QMA cable connection on the other. Our low PIM 7/16 DIN to QMA cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to QMA cable is a male to male coax assembly, PE3C5867, can also be known as a low PIM 7/16 DIN plug to QMA plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to QMA plug cable assembly PE3C5867 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 7/16 DIN cable assembly is manufactured with 7/16 DIN to QMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 7/16 DIN male to QMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5867 can also be used in the other direction and will be QMA male to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to QMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to QMA cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 7/16 DIN male to QMA male low PIM cable using SPP-250-LLPL coax, LF solder. | 315 | ||
| PE33586-72 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm, Length: 72 inches. 75 Ohm SMC Plug to 75 Ohm BNC Male Cable 72 Inch Length Using 75 Ohm RG179 Coax., Radio frequency assembly 75 Ohm SMC plug to 75 Ohm BNC male cable 72 inch length using 75 Ohm RG179 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm SMC plug to 75 Ohm BNC male cable 72 inch length using 75 Ohm RG179 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMC cable connection on one end and BNC cable connection on the other. Our SMC to BNC cable assemblies have a plug gender on end 1 and male on end 2. This SMC to BNC cable is a plug to male coax assembly, PE33586-72, can also be known as a SMC male to BNC plug cable assembly and will be shipped same-day as it is purchased. SMC male to BNC plug cable assembly PE33586-72 is built with RG179 which is a flexible coax type. The Pasternack flexible SMC cable assembly is manufactured with SMC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency SMC plug to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33586-72 can also be used in the other direction and will be BNC male to SMC plug cable assembly if the opposite connectivity is required. SMC male to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMC to BNC cable assembly for quick shipment worldwide. Variations of SMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm SMC plug to 75 Ohm BNC male cable 72 inch length using 75 Ohm RG179 coax. |
| 186 | ||
| PE3C5867-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 78.7402 inches. Plenum 7/16 DIN Male to QMA Male Low PIM Cable 200 cm Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum 7/16 DIN male to QMA male low PIM cable 200 cm length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 7/16 DIN male to QMA male low PIM cable 200 cm length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to QMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 7/16 DIN cable connection on one end and QMA cable connection on the other. Our low PIM 7/16 DIN to QMA cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to QMA cable is a male to male coax assembly, PE3C5867-200CM, can also be known as a low PIM 7/16 DIN plug to QMA plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to QMA plug cable assembly PE3C5867-200CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 7/16 DIN cable assembly is manufactured with 7/16 DIN to QMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 7/16 DIN male to QMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5867-200CM can also be used in the other direction and will be QMA male to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to QMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to QMA cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 7/16 DIN male to QMA male low PIM cable 200 cm length using SPP-250-LLPL coax, LF solder. |
| 35 | ||
| PE3C5867-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 48 inches. Plenum 7/16 DIN Male to QMA Male Low PIM Cable 48 Inch Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum 7/16 DIN male to QMA male low PIM cable 48 inch length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 7/16 DIN male to QMA male low PIM cable 48 inch length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to QMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 7/16 DIN cable connection on one end and QMA cable connection on the other. Our low PIM 7/16 DIN to QMA cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to QMA cable is a male to male coax assembly, PE3C5867-48, can also be known as a low PIM 7/16 DIN plug to QMA plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to QMA plug cable assembly PE3C5867-48 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 7/16 DIN cable assembly is manufactured with 7/16 DIN to QMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 7/16 DIN male to QMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5867-48 can also be used in the other direction and will be QMA male to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to QMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to QMA cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 7/16 DIN male to QMA male low PIM cable 48 inch length using SPP-250-LLPL coax, LF solder. |
| 35 | ||
| PE3C5867-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 59.0551 inches. Plenum 7/16 DIN Male to QMA Male Low PIM Cable 150 cm Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum 7/16 DIN male to QMA male low PIM cable 150 cm length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 7/16 DIN male to QMA male low PIM cable 150 cm length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to QMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 7/16 DIN cable connection on one end and QMA cable connection on the other. Our low PIM 7/16 DIN to QMA cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to QMA cable is a male to male coax assembly, PE3C5867-150CM, can also be known as a low PIM 7/16 DIN plug to QMA plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to QMA plug cable assembly PE3C5867-150CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 7/16 DIN cable assembly is manufactured with 7/16 DIN to QMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 7/16 DIN male to QMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5867-150CM can also be used in the other direction and will be QMA male to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to QMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to QMA cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 7/16 DIN male to QMA male low PIM cable 150 cm length using SPP-250-LLPL coax, LF solder. |
| 35 | ||
| PE3C5867-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 24 inches. Plenum 7/16 DIN Male to QMA Male Low PIM Cable 24 Inch Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum 7/16 DIN male to QMA male low PIM cable 24 inch length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 7/16 DIN male to QMA male low PIM cable 24 inch length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to QMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 7/16 DIN cable connection on one end and QMA cable connection on the other. Our low PIM 7/16 DIN to QMA cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to QMA cable is a male to male coax assembly, PE3C5867-24, can also be known as a low PIM 7/16 DIN plug to QMA plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to QMA plug cable assembly PE3C5867-24 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 7/16 DIN cable assembly is manufactured with 7/16 DIN to QMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 7/16 DIN male to QMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5867-24 can also be used in the other direction and will be QMA male to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to QMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to QMA cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 7/16 DIN male to QMA male low PIM cable 24 inch length using SPP-250-LLPL coax, LF solder. |
| 35 | ||
| PE3C5867-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 36 inches. Plenum 7/16 DIN Male to QMA Male Low PIM Cable 36 Inch Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum 7/16 DIN male to QMA male low PIM cable 36 inch length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 7/16 DIN male to QMA male low PIM cable 36 inch length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to QMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 7/16 DIN cable connection on one end and QMA cable connection on the other. Our low PIM 7/16 DIN to QMA cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to QMA cable is a male to male coax assembly, PE3C5867-36, can also be known as a low PIM 7/16 DIN plug to QMA plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to QMA plug cable assembly PE3C5867-36 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 7/16 DIN cable assembly is manufactured with 7/16 DIN to QMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 7/16 DIN male to QMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5867-36 can also be used in the other direction and will be QMA male to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to QMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to QMA cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 7/16 DIN male to QMA male low PIM cable 36 inch length using SPP-250-LLPL coax, LF solder. |
| 35 | ||
| PE3C5867-50CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 19.685 inches. Plenum 7/16 DIN Male to QMA Male Low PIM Cable 50 cm Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum 7/16 DIN male to QMA male low PIM cable 50 cm length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 7/16 DIN male to QMA male low PIM cable 50 cm length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to QMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 7/16 DIN cable connection on one end and QMA cable connection on the other. Our low PIM 7/16 DIN to QMA cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to QMA cable is a male to male coax assembly, PE3C5867-50CM, can also be known as a low PIM 7/16 DIN plug to QMA plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to QMA plug cable assembly PE3C5867-50CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 7/16 DIN cable assembly is manufactured with 7/16 DIN to QMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 7/16 DIN male to QMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5867-50CM can also be used in the other direction and will be QMA male to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to QMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to QMA cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 7/16 DIN male to QMA male low PIM cable 50 cm length using SPP-250-LLPL coax, LF solder. |
| 35 | ||
| PE3C5867-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 39.3701 inches. Plenum 7/16 DIN Male to QMA Male Low PIM Cable 100 cm Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum 7/16 DIN male to QMA male low PIM cable 100 cm length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 7/16 DIN male to QMA male low PIM cable 100 cm length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to QMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 7/16 DIN cable connection on one end and QMA cable connection on the other. Our low PIM 7/16 DIN to QMA cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to QMA cable is a male to male coax assembly, PE3C5867-100CM, can also be known as a low PIM 7/16 DIN plug to QMA plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to QMA plug cable assembly PE3C5867-100CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 7/16 DIN cable assembly is manufactured with 7/16 DIN to QMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 7/16 DIN male to QMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5867-100CM can also be used in the other direction and will be QMA male to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to QMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to QMA cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 7/16 DIN male to QMA male low PIM cable 100 cm length using SPP-250-LLPL coax, LF solder. |
| 35 | ||
| PE3C5867-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 60 inches. Plenum 7/16 DIN Male to QMA Male Low PIM Cable 60 Inch Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum 7/16 DIN male to QMA male low PIM cable 60 inch length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 7/16 DIN male to QMA male low PIM cable 60 inch length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to QMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 7/16 DIN cable connection on one end and QMA cable connection on the other. Our low PIM 7/16 DIN to QMA cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to QMA cable is a male to male coax assembly, PE3C5867-60, can also be known as a low PIM 7/16 DIN plug to QMA plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to QMA plug cable assembly PE3C5867-60 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 7/16 DIN cable assembly is manufactured with 7/16 DIN to QMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 7/16 DIN male to QMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5867-60 can also be used in the other direction and will be QMA male to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to QMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to QMA cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 7/16 DIN male to QMA male low PIM cable 60 inch length using SPP-250-LLPL coax, LF solder. |
| 35 | ||
| PE45867 | Pasternack Enterprises | Key Specifications, Connector Series: MCX, Connector Gender: Plug, Impedance: 50 Ohm, Body Style: Right Angle, Attachment Method: Crimp/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 6 GHz, Interface Type 1: RG316. MCX Plug Right Angle Non-Magnetic Connector Crimp/Solder Attachment for RG316. PE45867 MCX plug right angle coaxial connector has an interface type of MCX plug RG316 and a 50 Ohm impedance. This connector is part of our non-magnetic RF interconnects that are designed for carrying RF signals within a magnetic field. As such, they have a low level of magnetic susceptibility and no field distortion. Pasternack's MCX plug connector uses crimp/solder as an attachment method. Our plug MCX right angle coaxial connector provides a maximum frequency of 6 GHz. This MCX coaxial connector is stocked to be readily available for same business day shipment. The Pasternack right angle MCX plug coaxial connector has a maximum VSWR of 1.1:1. This non-magnetic connector is suitable for use in MRI and other medical imaging equipment, patient monitoring devices, medical technology, and other non-magnetic RF applications. Pasternack's MCX coaxial connector has a bronze body with copper-tin-zinc alloy plating. Our PE45867 MCX right angle connector uses gold over copper-plated bronze contact. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. The radio frequency connector is made from bronze material and has a contact life of 500 cycles or more. The PE45867 MCX non-magnetic connector operates at a temperature range of -55 to 125 deg C. This push-on plug coaxial RF connector has a maximum insertion loss of 0.5 dB. The Pasternack non-magnetic MCX plug connector has a maximum operating voltage of 170 Vrms and a dielectric withstanding voltage of 500 Vrms. This Pasternack non-magnetic right angle plug MCX connector will ship the same business day as purchased. Our MCX right angle plug connector is part of RF, microwave and millimeter wave components in stock for worldwide shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements. |
| 25 | ||
| PE3W25867 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male Right Angle to N Male Cable Using RG58 Coax. PE3W25867 is a reverse polarity SMA male right angle to N male cable using RG58 coax. This Pasternack reverse polarity SMA male right angle to N male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. SMA right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our reverse polarity male SMA right angle to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W25867 SMA reverse polarity male right angle to N male cable assembly is constructed with RG58 coax. | 0 | |||
| PE3W15867LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SHV, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: UHF, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG8A/U, RF Cable Type: RG8, RF Cable Impedance: 50 Ohm. SHV Plug to UHF Male Cable Using RG8 Coax with HeatShrink, LF Solder. PE3W15867LF/HS is a SHV plug to UHF male cable using RG8 coax. This Pasternack SHV plug to UHF male cable assembly uses a 50 Ohm SHV for connector 1 and a 50 Ohm UHF for connector 2. Our plug SHV to male UHF cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W15867LF/HS SHV plug to UHF male cable assembly is constructed with RG8 coax. | 0 | |||
| PE3W05867 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm. BNC Male to QMA Male Cable Using RG141 Coax. PE3W05867 is a BNC male to QMA male cable using RG141 coax. This Pasternack BNC male to QMA male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm QMA for connector 2. Our male BNC to male QMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W05867 BNC male to QMA male cable assembly is constructed with RG141 coax. | 0 | |||
| PE3C3586-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. SMA Female to Push-On SMP Female Right Angle Cable 72 Inch Length Using RG316 Coax., Radio frequency assembly SMA female to push-on SMP female right angle cable 72 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female to push-on SMP female right angle cable 72 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle SMP cable connection on the other. Our SMA to right angle SMP cable assemblies have a female gender on end 1 and female on end 2. PE3C3586-72 can also be known as a SMA jack to right angle SMP jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMP jack cable assembly PE3C3586-72 is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMA female to SMP right angle female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3586-72 can also be used in the other direction and will be right angle SMP female to SMA female cable assembly if the opposite connectivity is required. SMA jack to SMP right angle jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to push-on SMP female right angle cable 72 inch length using RG316 coax. |
| 0 | ||
 Vyrian | 75867-332LF | Amphenol Communications Solutions | Board Connector, 8 Contact(s), 2 Row(s), Male, Right Angle, 0.1 inch Pitch, Solder Terminal, Locking, Blue Insulator | 13,066 | ||
| NTD5867NL-1G | onsemi | Power Field-Effect Transistor, 20A I(D), 60V, 0.05ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 12,980 | |||
| 75867-105LF | Amphenol Communications Solutions | Board Connector, 26 Contact(s), 2 Row(s), Male, Right Angle, 0.1 inch Pitch, Solder Terminal, Locking, Blue Insulator | 12,583 | |||
| SA58672UK,027 | NXP Semiconductors | Audio Amplifier, 3W, 1 Channel(s), 1 Func, PBGA9 RoHS : Compliant | 11,777 | |||
| 2885867 | Phoenix Contact | RF/Microwave Devices RoHS : Compliant | 9,111 | |||
| 2N5867 | Texas Instruments | Power Bipolar Transistor, 3A I(C), 60V V(BR)CEO, 1-Element, PNP, Silicon, TO-3, Metal, 2 Pin RoHS : Not Compliant | 8,446 | |||
| 1586768-6 | TE Connectivity | Board Connector, 6 Contact(s), 2 Row(s), Male, Straight, Solder Terminal, White Insulator, Plug RoHS : Compliant | 7,847 | |||
MSP430FR5867IRGZR | Texas Instruments | RISC Microcontroller, 16-Bit, FRAM, MSP430 CPU, 16MHz, CMOS, PQCC48 RoHS : Compliant | 7,373 | |||
SA58672TK,138 | NXP Semiconductors | Audio Amplifier, 3W, 1 Channel(s), 1 Func, PDSO10 RoHS : Compliant | 6,852 | |||
| CT558675 | Micron Technology, Inc | 6,190 | ||||
| 1-1586768-2 | TE Connectivity | Board Connector, 12 Contact(s), 2 Row(s), Male, Straight, Solder Terminal, White Insulator, Plug RoHS : Compliant | 5,162 | |||
| CT558674 | Micron Technology, Inc | 4,757 | ||||
SA58670BS,115 | NXP Semiconductors | Audio Amplifier, 2.1W, 2 Channel(s), 1 Func, PQCC20 RoHS : Compliant | 4,548 | |||
| MSP430FR5867IRGZT | Texas Instruments | RISC Microcontroller, 16-Bit, FRAM, MSP430 CPU, 16MHz, CMOS, PQCC48 RoHS : Compliant | 4,165 | |||
| CT558673 | Micron Technology, Inc | 2,495 | ||||
 Win Source Electronics | NTD5867NLT4G | onsemi | MOSFET N-CH 60V 20A DPAK RoHS : Compliant |
| 104,915 | |
| SVD5867NLT4G | onsemi | MOSFET N-CH 60V 22A DPAK-3 / N-Channel 60 V 22A (Tc) 3.3W (Ta), 43W (Tc) Surface Mount DPAK-3 RoHS : Compliant |
| 47,620 | ||
| NVD5867NLT4G | onsemi | MOSFET N-CH 60V 6A/22A DPAK-3 RoHS : Compliant |
| 20,000 | ||
| 75867-105LF | Amphenol FCi | CONN HEADER 26POS DUAL R/A PCB RoHS : Compliant |
| 16,691 | ||
| SA58672TK | Nexperia | IC AMP AUDIO 3W MONO D 10HVSON |
| 655 | ||
| SA58672TK+138 | Nexperia | IC AMP AUDIO 3W MONO D 10HVSON |
| 590 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼ 
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand