| Electronic Components Datasheet Search |
|
5887PVC Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Avnet Americas | 5558872-1 | TE Connectivity | - Trays (Alt: 5558872-1) RoHS : Compliant |
| 817 | |
| 5175887-4 | TE Connectivity | - Rail/Tube (Alt: 5175887-4) RoHS : Compliant |
| 0 | ||
| B65887E270A87 | TDK Corporation | RM14 N87 270 +3% -3% - Trays (Alt: B65887E0270A087) RoHS : Compliant |
| 0 | ||
| B65887ER49 | TDK Corporation | - Trays (Alt: B65887E0000R049) RoHS : Compliant |
| 0 | ||
| WSC2515887R0FEA | Vishay Intertechnologies | WSC2515 887 1% EA e3 - Tape and Reel (Alt: WSC2515887R0FEA) RoHS : Compliant |
| 0 | ||
| D0005887 | VPG Foil Resistors | Resistor Shunt Precision Power 0.018Ohm 1% 2-Pin TO-247 - Bulk (Alt: D0005887) RoHS : Not Compliant |
| 0 | ||
| 2-2325887-1 | TE Connectivity | 2POS,MCON 1.2,REC HSG ASSY,SLD,COD B - Boxed Product (Development Kits) (Alt: 2-2325887-1) RoHS : Not Compliant |
| 0 | ||
| 2-5175887-9 | TE Connectivity | - Rail/Tube (Alt: 2-5175887-9) RoHS : Compliant |
| 0 | ||
| WSN2515887R0JEA | Vishay Intertechnologies | - Tape and Reel (Alt: WSN2515887R0JEA) RoHS : Compliant | 0 | |||
| WSN2515887R0FEA | Vishay Intertechnologies | - Tape and Reel (Alt: WSN2515887R0FEA) RoHS : Compliant | 0 | |||
| RCWP7225887KFKET | Vishay Intertechnologies | RCWP-7225 887K 1% K ET e3 - Waffle Pack (Alt: RCWP7225887KFKET) RoHS : Compliant |
| 0 | ||
| RCWP7225887KFKS2 | Vishay Intertechnologies | RCWP-7225 887K 1% K S83 - Tape and Reel (Alt: RCWP7225887KFKS2) RoHS : Not Compliant |
| 0 | ||
| ERL05887K00FKEA500 | Vishay Intertechnologies | ERL-05-500 887K 1% T-1 EA e3 - Tape and Reel (Alt: ERL05887K00FKEA500) RoHS : Compliant |
| 0 | ||
| B65887H4300X41 | TDK Corporation | - Trays (Alt: B65887H4300X041) RoHS : Compliant |
| 0 | ||
| CMF55887K00FKWF | Vishay Intertechnologies | - Tape and Reel (Alt: CMF55887K00FKWF) RoHS : Not Compliant |
| 0 | ||
![]() Newark | LFXTAL085887RL3K | IQD Frequency Products | Crystal, 32Mhz, 8Pf, Smd, 3.2Mm X 2.5Mm; |Iqd Frequency Products LFXTAL085887RL3K RoHS : Compliant |
| 945 | |
| LFXTAL085887RL3K | IQD Frequency Products | Crystal, 32Mhz, 8Pf, Smd, 3.2Mm X 2.5Mm; |Iqd Frequency Products LFXTAL085887RL3K RoHS : Compliant |
| 945 | ||
| 35-8875 | Stellar labs (MCM Electronics) | Headphone, 16Hz-20Khz, 16 Ohm; Frequency Response Min:16Hz; Frequency Response Max:20Khz; Impedance:16Ohm; Drive Unit Type:Dynamic; Connector Type:3.5Mm Connector; Lead Length:3.9Ft; Product Range:-; Colour:Black |Stellar Labs 35-8875 RoHS : Not Compliant |
| 507 | ||
| 5558872-1 | TE Connectivity | Rj22 Connector, Jack, 4P4C, 1Port, Cat3; |Te Connectivity Amp 5558872-1 RoHS : Compliant |
| 352 | ||
| B65887E0000R087 | TDK Corporation | Ferrite Core, Rm, N87; |Tdk B65887E0000R087 RoHS : Compliant |
| 230 | ||
| B65887E0000R041 | TDK Corporation | Transformer Core, Rm, N41, 70Mm; |Tdk B65887E0000R041 RoHS : Compliant |
| 49 | ||
| 63825-8875 | Molex | Hand Crimp Tool Locator, Terminal; |Molex 63825-8875 (Alternate Part Number: 887191517285 RoHS : Not Compliant |
| 8 | ||
| TR00015887-000 | TR Fastenings | Set Screw, Hex Socket, M4 X 10Mm, Ss A2; |Tr Fastenings TR00015887-000 RoHS : Compliant |
| 4 | ||
| 785887-01 | NI | Software Defined Radio, Encl; Available Until Stocks Are Exhausted |Ni/emerson 785887-01 RoHS : Compliant |
| 3 | ||
| 5175887-4 | TE Connectivity | Champ 050-2 Rec Assy V 26P |Te Connectivity Amp 5175887-4 RoHS : Not Compliant |
| 0 | ||
| 5175887-4 | TE Connectivity | Champ 050-2 Rec Assy V 26P; |Te Connectivity Amp 5175887-4 RoHS : Not Compliant |
| 0 | ||
| 345-134-558-878 | EDAC Inc | Conn Card Edge Dual Side 134 Pos 1.57Mm; |Edac 345-134-558-878 RoHS : Compliant |
| 0 | ||
| 387-066-558-878 | EDAC Inc | Conn, Card Edge, Edac 387-066-558-878; |Edac 387-066-558-878 RoHS : Not Compliant |
| 0 | ||
| 396-084-558-878 | EDAC Inc | Conn, Card Edge, Edac 396-084-558-878; |Edac 396-084-558-878 RoHS : Not Compliant |
| 0 | ||
| 745-887/006-000 | WAGO Innovative Connections | Stackable Pcb Terminal Block; 16 Mm ; Pin Spacing 20 Mm; 1-Pole; Cage Clamp ; Commoning Option; 16,00 Mm ; Green-Yellow |Wago 745-887/006-000 RoHS : Not Compliant |
| 0 | ||
![]() RS | 1755-3/4X60FT (7000058870) | 3M | TAPE, COTTON FRICTION, 60 FT., 3/4 IN., +21 C, 0.015 IN., WOVEN COTTON FABRIC |
| 410 | |
| 23_SMA-50-0-13/111_NH (22658873) | HUBER+SUHNER | RF CONNECTORS / COAXIAL CONNECTORS, STRAIGHT PANEL RECEPTACLE JACK, FLANGE MOUN |
| 75 | ||
| 5558872-1 | TE Connectivity | CAT3 4P4C STRAIGHT THROUGH HOLE UTP RJ22 MODULAR JACK CONNECTOR RoHS : Compliant |
| 49 | ||
| 2345887 | RS Pro | ADHESIVE LINED HEAT SHRINK TUBING, 12.7MM SLEEVE, D X 1.22M L, 3:1 RATIO, BLACK |
| 31 | ||
| HSJ200 (Z235887) | Mersen Electrical Power | FUSE, HIGH SPEED, CLASS J, I.R. 200KA AC/100KA DC, 600VAC/500VDC, 200A |
| 24 | ||
| 952X (7000058873) | 3M | CONN CRIMPTERM QUICKDISCONNECT T-TAP FEMALE 18-14AWG INSUL. SCOTCHLOK |
| 16 | ||
| 33588 (7100132681) | 3M | FILE BELT SANDER CONTACT ARM ASSEMBLY, 457 MM (18 IN) X 13 MM |
| 7 | ||
| 2675887 | RS Pro | EQUIPMENT HOOK-UP WIRE, SINGLE CORE, PVC, 7 STRANDS, 7 0.2MM 500M, YELLOW |
| 3 | ||
| 1365887 | RS Pro | THERMOCOUPLE TYPE K 9.84 FT (3M) 550F (260C) MAX 1/0.3 STRANDING 28AWG |
| 2 | ||
| OXP12X800 (1SCA145887R1001) | ABB Low Voltage Products and Systems | OPERATING SHAFT 31.5" (800MM) |
| 2 | ||
| 1458871 (SACC-E-M12FS-5CON-M16/0 5 VA) | Phoenix Contact | CABLE; SENSOR/ACT; PANEL FEED-THROUGH; 5 POS; M12; SACC-E-M12FS-5CON-M16/0,5 VA |
| 2 | ||
| 7058876 (7059976) | RS Pro | BLACK COMPOSITE TOE BOOT MENS 11 LACE UP LEATHER UPPER COMPOSITE MIDSOLE |
| 1 | ||
| GL10-P4212 (1065887) | SICK AG | PHOTOELECTRIC RETROREFLECTIVE SENSOR,15M AND 12M, VISBL RED, PNP, M12 CONN |
| 1 | ||
| MS6-LFR-1/2-D7-E-R-M (588774) | Festo | FILTER REGULATOR, MS6 SERIES |
| 1 | ||
| 35887 (00051131358874) | 3M | EZ Sand Multi Purpose Repair Material, 47.3 mL Caridge |
| 0 | ||
![]() Bisco Industries | MS51958-87 | Mac Fastteners Inc | 15 | |||
| MS51958-87 | Pilgrim Screw Corporation | 3 | ||||
| MS51958-87 | MS MACHINE SCREWS | 1 | ||||
![]() Rochester Electronics | MAX5887EGK+D | Analog Devices Inc | MAX5887 - 3.3V, 14-Bit, 500Msps High Dynamic Performance DAC with Differential LVDS Inputs RoHS : Compliant |
| 1,390 | |
MAX5887EGK![]() | Maxim Integrated Products | IC DAC 1 CONV 14Bits Current Steering LVDS - Parallel 68-QFN Tube RoHS : Not Compliant |
| 2,417 | ||
![]() Sager | 1858879 | Phoenix Contact | Pluggable Terminal Blocks 2 Pos 7.62mm Invert Plug 24-12AWG Screw RoHS : Compliant |
| 0 | |
| 0825887:N | Phoenix Contact | Wire Labels & Markers SD-WMS 5 (CH):N | 0 | |||
| 5175887-4 | TE Connectivity | D-Sub Standard Connectors CHAMP 050-2 REC ASSY V 26P RoHS : Compliant |
| 0 | ||
| 588781-000 | TE Connectivity | Terminals D-609-08CS1004 |
| 0 | ||
| 805887-1 | TE Connectivity | Crimpers / Crimping Tools ANVIL COMBINATION RoHS : Compliant |
| 0 | ||
| 2-2325887-1 | TE Connectivity | 2POS,MCON 1.2,REC HSG ASSY,SLD,COD B RoHS : Compliant |
| 0 | ||
| 2-5175887-9 | TE Connectivity | D-Sub Standard Connectors 050-2 REC V 100P RoHS : Compliant |
| 0 | ||
| 5-805887-2 | TE Connectivity | Crimpers / Crimping Tools ANVIL, COMBINATION | 0 | |||
| M3786/4-5887GL | Grayhill Inc | Rotary Switches Rotary Switch, Military, 44HBGS45-03-1-08N-C | 0 | |||
| 9-805887-5 | TE Connectivity | Crimpers / Crimping Tools ANVIL COMBINATION | 0 | |||
| 2-805887-4 | TE Connectivity | Crimpers / Crimping Tools ANVIL-COMBINATION | 0 | |||
| 0558870401 | Molex | I/O Connectors | 0 | |||
| 1200658875 | Molex | Sensor Cables / Actuator Cables MMC-3P-FE-90-2M-SJTO;SS RoHS : Compliant | 0 | |||
| 3-805887-8 | TE Connectivity | Crimpers / Crimping Tools ANVIL COMB | 0 | |||
| 3-805887-9 | TE Connectivity | Crimpers / Crimping Tools ANVIL COMB RoHS : Compliant | 0 | |||
![]() TME | A5887H | Antenova M2M | Antenna: communication; WiFi; linear; SMD; 50Ω; 2.4÷2.5GHz RoHS : Compliant |
| 1,000 | |
| 3-5175887-0 | TE Connectivity | 3-5175887-0 RoHS : Compliant |
| 342 | ||
| 2588770000 | Weidmüller Interface GmbH & Co. KG | 2588770000 RoHS : Compliant |
| 288 | ||
| 2-5175887-9 | TE Connectivity | Contact; female; gold-plated; soldering,THT; 1.27mm; vertical RoHS : Compliant |
| 185 | ||
| 5558872-1 | TE Connectivity | Connector: RJ9; socket; data transfer; PIN: 4; 4p4c; THT; straight RoHS : Compliant |
| 114 | ||
| 5887 | SOLID TOOLS | Trash bags; blue; 120l; 10pcs. |
| 7 | ||
| 45887010 | TE Connectivity | Contactor: 3-pole |
| 4 | ||
| 1358870000 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; male; power supply; 9.5A RoHS : Compliant |
| 0 | ||
| 95887 | Goobay | Patch cord; U/UTP; Cat 6; RJ45 plug,both sides; 5m; stranded; Cu |
| 0 | ||
| 1158872 | Bossard Group | Screw; M5; M5x14; 0.8; Head: countersunk; Phillips; PH2; steel; zinc |
| 0 | ||
| CRCW0805887RFHEAP | Vishay Intertechnologies | Resistor: thick film; 887Ω; SMD; 0805; 125mW; ±1%; 150V; -55÷155°C RoHS : Compliant |
| 0 | ||
| 10058870 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; data; PIN: 14; THT; 3A; 250V |
| 0 | ||
| 10058871 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; data; PIN: 14; THT; 3A; 250V |
| 0 | ||
| 2-1633588-7 | TE Connectivity | Crimping tool: dedicated RoHS : Compliant |
| 0 | ||
| 8588700 | Gedore Torque Ltd | Interchangeable blade; 380mm; wood (ash); Application: hammer |
| 0 | ||
![]() ComSIT USA | LFXTAL015887BULK | IQD Frequency Products | Parallel - Fundamental Quartz Crystal, 3.6864MHz Nom RoHS : Compliant | 450 | ||
![]() Interstate Connecting Components | 5558872-1 | TE Connectivity | MJTE4PW/0 PNL STOPS RoHS : Compliant |
| 1,690 | |
| C-0600-5887-E202 | Tri-Star Electronics International | ARINC CONTACT | 19 | |||
| 805887-1 | TE Connectivity | ANVIL, COMBINATION RoHS : Compliant |
| 3 | ||
| 5175887-4 | TE Connectivity | CHAMP 050-2 REC ASSY V 26 RoHS : Compliant |
| 0 | ||
| 588781-000 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYCD-609-08CS1004 | 0 | |||
| 2-2325887-1 | TE Connectivity | 2POS,MCON 1.2,REC HSG ASSY,SLD RoHS : Compliant | 0 | |||
| 2-5175887-9 | TE Connectivity | CHAMP 050-2 REC ASSY V 100P RoHS : Compliant |
| 0 | ||
| 058-8752-000 | ITT Interconnect Solutions | 588752000 | 0 | |||
| 85005887W2 | SOURIAU-SUNBANK | J3804 | 0 | |||
| 10-035887-036 | Amphenol Industrial Operations | CAP ACCY | 0 | |||
| 10-035887-024 | Amphenol Industrial Operations | CAP ACCY | 0 | |||
| 4-805887-6 | TE Connectivity | ANVIL, COMBINATION |
| 0 | ||
| 6-805887-6 | TE Connectivity | ANVIL, COMBINATION |
| 0 | ||
| 5-805887-3 | TE Connectivity | ANVIL, COMBINATION |
| 0 | ||
| 10-035887-020 | Amphenol Industrial Operations | CAP ACCY | 0 | |||
![]() PEI Genesis | 85005887SW | SOURIAU-SUNBANK |
| 240 | ||
| 20588.7 | CONTA-CLIP Inc |
| 0 | |||
| 1135887G3 | SOURIAU-SUNBANK |
| 0 | |||
| S1071-158-.87-12 | SOURIAU-SUNBANK |
| 0 | |||
| 25887.9 | CONTA-CLIP Inc |
| 0 | |||
| 1135887G5 | SOURIAU-SUNBANK |
| 0 | |||
| 1135887G6 | SOURIAU-SUNBANK |
| 0 | |||
| 11472588-7 | SOURIAU-SUNBANK |
| 0 | |||
| 1135887G4 | SOURIAU-SUNBANK |
| 0 | |||
| 1135887G7 | SOURIAU-SUNBANK |
| 0 | |||
| ES7588-74H1A | SOURIAU-SUNBANK |
| 0 | |||
| 1135887G10 | SOURIAU-SUNBANK |
| 0 | |||
![]() Richardson RFPD | 135887 | Maxwell Technologies | SUPERCAP ULTRACAP RoHS : Compliant | 0 | ||
| 22658873 | HUBER+SUHNER | Conn SMA 0Hz to 18GHz 50Ohm ST Flange Mount RCP Go RoHS : Compliant |
| 0 | ||
![]() Chip 1 Exchange | CRCW08058871FT | INSTOCK | 15,000 | |||
| 120-95887-ES00 | Murata Manufacturing Co Ltd | INSTOCK | 500 | |||
![]() Avnet Abacus | B65887ER49 | TDK Corporation | Ferrite Core RM Core 422mm 302mm Power Applications (Alt: B65887E0000R049) RoHS : Compliant | 240 | ||
| 1858879 | Phoenix Contact | GIC 25 2STF762 GIC252STF762 (Alt: 1858879) RoHS : Compliant | 0 | |||
| 805887-1 | TE Connectivity | (Alt: 805887-1) RoHS : Not Compliant | 0 | |||
| 805887-1 | TE Connectivity | (Alt: 805887-1) RoHS : Not Compliant | 0 | |||
| 5175887-4 | TE Connectivity | (Alt: 5175887-4) RoHS : Compliant | 0 | |||
| 5558872-1 | TE Connectivity | Modular Connector RJ22 Jack 1 x 1 Port 4P4C Cat3 Through Hole Mount (Alt: 5558872-1) RoHS : Compliant | 0 | |||
| 5558872-1 | TE Connectivity | Modular Connector RJ22 Jack 1 x 1 Port 4P4C Cat3 Through Hole Mount (Alt: 5558872-1) RoHS : Compliant | 0 | |||
| 5887046-1 | TE Connectivity | Conn Type F RCP Solder ST ThruHole Tin (Alt: 5887046-1) RoHS : Compliant | 0 | |||
| 2588710000 | Weidmüller Interface GmbH & Co. KG | CBCSP 1814020 TP (Alt: 2588710000) RoHS : Compliant | 0 | |||
| 3-805887-9 | TE Connectivity | (Alt: 3-805887-9) RoHS : Not Compliant | 0 | |||
| 1-805887-7 | TE Connectivity | (Alt: 1-805887-7) RoHS : Not Compliant | 0 | |||
| 5887420004 | TE Connectivity | (Alt: 5887420004) RoHS : Not Compliant | 0 | |||
| 2-5175887-9 | TE Connectivity | (Alt: 2-5175887-9) RoHS : Compliant | 0 | |||
| DKTFM33WC5887 | Kyocera AVX Components | (Alt: DKTFM33WC5887) RoHS : Not Compliant | 0 | |||
| B65887H4300X41 | TDK Corporation | EPCB65887H4300X41 (Alt: B65887H4300X041) RoHS : Compliant | 0 | |||
![]() Avnet Asia | TNPW0805887KBEEA | Vishay Intertechnologies | (Alt: TNPW0805887KBEEA) RoHS : Compliant | 0 | ||
| TC358871XBG(NOK) | Toshiba America Electronic Components | (Alt: TC358871XBG(NOK)) RoHS : Compliant | 0 | |||
| 588742-000 | TE Connectivity | (Alt: 588742-000) RoHS : Compliant | 0 | |||
| 10158875-101LF | Amphenol Corporation | (Alt: 10158875-101LF) RoHS : Compliant | 0 | |||
![]() Avnet Silica | AL5887JAZW52-13 | Diodes Incorporated | (Alt: AL5887JAZW52-13) RoHS : Compliant | 4,000 | ||
| A5887H | Antenova M2M | (Alt: A5887H) RoHS : Compliant | 0 | |||
| AL5887-13 | Diodes Incorporated | WQFN52EP I2C SPI 36Channel RGB LED Driver (Alt: AL5887-13) RoHS : Compliant | 0 | |||
| AL5887Q-13 | Diodes Incorporated | WQFN52EP A I2C SPI 36Channel RGB LED Driver (Alt: AL5887Q-13) RoHS : Compliant | 0 | |||
| AL5887QJAZW52-13 | Diodes Incorporated | (Alt: AL5887QJAZW52-13) RoHS : Compliant | 0 | |||
| CS15887_STRADA-IP-2X6-T3-B-90 | LEDIL | Assembly for XTEXPG2XPLLUXEON VOslon Square Gen3 Series LEDS (Alt: CS15887_STRADA-IP-2X6-T3-B-90) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | CRCW0805887RFKEA | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Compliant |
| 5,000 | |
| CRCW08058873FRT1 | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 3,340 | ||
| CRCW08058870FRT1 | Vishay Dale | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 3,000 | ||
| TNPW0805-8.87K-.1%T-9R75 | Vishay Intertechnologies | IN STOCK SHIP TODAY |
| 1,300 | ||
| TNPW08058871BR75 | Vishay Intertechnologies | IN STOCK SHIP TODAY |
| 1,300 | ||
| 6588714-5 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 98 | ||
| 1588763-1 | TE Connectivity | IN STOCK SHIP TODAY | 30 | |||
![]() EBV Elektronik | E25GSFP28SRX 958873 | Intel Corporation | Intel Ethernet SFP28 SR Optic Single Pack (Alt: 958873) RoHS : Compliant | 0 | ||
| CS15887_STRADA-IP-2X6-T3-B-90 | LEDIL | Assembly for XTEXPG2XPLLUXEON VOslon Square Gen3 Series LEDS (Alt: CS15887_STRADA-IP-2X6-T3-B-90) RoHS : Compliant | 0 | |||
![]() Master Electronics | 5558872-1 | TE Connectivity | MJ TE 4P W/0 PNL STOPS RoHS : Compliant |
| 3,007 | |
| 805887-1 | TE Connectivity | Anvil - Combination. RoHS : Not Compliant |
| 3 | ||
| 1858879 | Phoenix Contact | PCB connector - nominal current: 12 A - rated voltage (III/2): 630 V - nominal cross section: 2.5 mm² - number of positions: 2 - pitch: 7.62 mm - connection method: Screw connection with tension sleeve - color: green - contact surface: Tin RoHS : Compliant |
| 0 | ||
| 5175887-4 | TE Connectivity | CHAMP 050-2 REC ASSY V 26P MOQ Reduction RoHS : Compliant |
| 0 | ||
| 588781-000 | TE Connectivity | D-609-08CS1004 MOQ Reduction RoHS : Compliant |
| 0 | ||
| 2-2325887-1 | TE Connectivity | MOQ Reduction RoHS : Compliant |
| 0 | ||
| 2-5175887-9 | TE Connectivity | CHAMP 050-2 REC ASSY V 100P RoHS : Compliant |
| 0 | ||
| TGL-53735887 | Carling Technologies | LTIG H & L-SERIES RKR SW RoHS : Compliant |
| 0 | ||
| 5-805887-2 | TE Connectivity | ANVIL COMBINATION RoHS : Not Compliant |
| 0 | ||
| 9-805887-5 | TE Connectivity | ANVIL COMBINATION RoHS : Not Compliant |
| 0 | ||
| 2-805887-4 | TE Connectivity | ANVIL-COMBINATION RoHS : Not Compliant |
| 0 | ||
| 3-805887-8 | TE Connectivity | ANVIL COMB RoHS : Not Compliant |
| 0 | ||
| 3-805887-9 | TE Connectivity | ANVIL COMB RoHS : Not Compliant |
| 0 | ||
| 702305887 | OMRON Industrial Automation | MSF4800S-14-0680-SB1 RoHS : Compliant |
| 0 | ||
| 1-805887-7 | TE Connectivity | ANVIL COMBINATION RoHS : Not Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3C5887 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm. Plenum N Male to SMA Male Low PIM Cable Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum N male to SMA male low PIM cable using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N male to SMA male low PIM cable using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and SMA cable connection on the other. Our low PIM type N to SMA cable assemblies have a male gender on end 1 and male on end 2. This type N to SMA cable is a male to male coax assembly, PE3C5887, can also be known as a low PIM N type plug to SMA plug cable assembly and will be shipped same-day as it is purchased. Type N plug to SMA plug cable assembly PE3C5887 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with N type to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM type N male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5887 can also be used in the other direction and will be SMA male to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N male to SMA male low PIM cable using SPP-250-LLPL coax, LF solder. | 567 | ||
| PE3588-72 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG196A/U, RF Cable Type: RG196, RF Cable Impedance: 50 Ohm, Length: 72 inches. SMB Plug to SMB Plug Cable 72 Inch Length Using RG196 Coax., Radio frequency assembly SMB plug to SMB plug cable 72 inch length using RG196 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMB plug to SMB plug cable 72 inch length using RG196 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to SMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMB cable connection on one end and SMB cable connection on the other. Our SMB to SMB cable assemblies have a plug gender on end 1 and plug on end 2. This SMB to SMB cable is a plug to plug coax assembly, PE3588-72, can also be known as a SMB male to SMB male cable assembly and will be shipped same-day as it is purchased. SMB male to SMB male cable assembly PE3588-72 is built with RG196 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to SMB cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency SMB plug to SMB plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMB male to SMB male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to SMB cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMB plug to SMB plug cable 72 inch length using RG196 coax. |
| 148 | ||
| PE3C5887-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 60 inches. Plenum N Male to SMA Male Low PIM Cable 60 Inch Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum N male to SMA male low PIM cable 60 inch length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N male to SMA male low PIM cable 60 inch length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and SMA cable connection on the other. Our low PIM type N to SMA cable assemblies have a male gender on end 1 and male on end 2. This type N to SMA cable is a male to male coax assembly, PE3C5887-60, can also be known as a low PIM type N plug to SMA plug cable assembly and will be shipped same-day as it is purchased. N type plug to SMA plug cable assembly PE3C5887-60 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM N type male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5887-60 can also be used in the other direction and will be SMA male to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N male to SMA male low PIM cable 60 inch length using SPP-250-LLPL coax, LF solder. |
| 63 | ||
| PE3C5887-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 36 inches. Plenum N Male to SMA Male Low PIM Cable 36 Inch Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum N male to SMA male low PIM cable 36 inch length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N male to SMA male low PIM cable 36 inch length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with N type cable connection on one end and SMA cable connection on the other. Our low PIM type N to SMA cable assemblies have a male gender on end 1 and male on end 2. This type N to SMA cable is a male to male coax assembly, PE3C5887-36, can also be known as a low PIM N type plug to SMA plug cable assembly and will be shipped same-day as it is purchased. Type N plug to SMA plug cable assembly PE3C5887-36 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM N type male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5887-36 can also be used in the other direction and will be SMA male to type N male cable assembly if the opposite connectivity is required. Low PIM N type plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N male to SMA male low PIM cable 36 inch length using SPP-250-LLPL coax, LF solder. |
| 63 | ||
| PE3C5887-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 59.0551 inches. Plenum N Male to SMA Male Low PIM Cable 150 cm Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum N male to SMA male low PIM cable 150 cm length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N male to SMA male low PIM cable 150 cm length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and SMA cable connection on the other. Our low PIM type N to SMA cable assemblies have a male gender on end 1 and male on end 2. This N type to SMA cable is a male to male coax assembly, PE3C5887-150CM, can also be known as a low PIM type N plug to SMA plug cable assembly and will be shipped same-day as it is purchased. Type N plug to SMA plug cable assembly PE3C5887-150CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with N type to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM type N male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5887-150CM can also be used in the other direction and will be SMA male to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to SMA cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N male to SMA male low PIM cable 150 cm length using SPP-250-LLPL coax, LF solder. |
| 63 | ||
| PE3C5887-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 39.3701 inches. Plenum N Male to SMA Male Low PIM Cable 100 cm Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum N male to SMA male low PIM cable 100 cm length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N male to SMA male low PIM cable 100 cm length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and SMA cable connection on the other. Our low PIM N type to SMA cable assemblies have a male gender on end 1 and male on end 2. This type N to SMA cable is a male to male coax assembly, PE3C5887-100CM, can also be known as a low PIM N type plug to SMA plug cable assembly and will be shipped same-day as it is purchased. Type N plug to SMA plug cable assembly PE3C5887-100CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM N type male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5887-100CM can also be used in the other direction and will be SMA male to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to SMA cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N male to SMA male low PIM cable 100 cm length using SPP-250-LLPL coax, LF solder. |
| 63 | ||
| PE3C5887-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 78.7402 inches. Plenum N Male to SMA Male Low PIM Cable 200 cm Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum N male to SMA male low PIM cable 200 cm length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N male to SMA male low PIM cable 200 cm length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with N type cable connection on one end and SMA cable connection on the other. Our low PIM type N to SMA cable assemblies have a male gender on end 1 and male on end 2. This type N to SMA cable is a male to male coax assembly, PE3C5887-200CM, can also be known as a low PIM type N plug to SMA plug cable assembly and will be shipped same-day as it is purchased. N type plug to SMA plug cable assembly PE3C5887-200CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM type N male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5887-200CM can also be used in the other direction and will be SMA male to N type male cable assembly if the opposite connectivity is required. Low PIM type N plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N male to SMA male low PIM cable 200 cm length using SPP-250-LLPL coax, LF solder. |
| 63 | ||
| PE3C5887-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 12 inches. Plenum N Male to SMA Male Low PIM Cable 12 Inch Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum N male to SMA male low PIM cable 12 inch length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N male to SMA male low PIM cable 12 inch length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and SMA cable connection on the other. Our low PIM N type to SMA cable assemblies have a male gender on end 1 and male on end 2. This N type to SMA cable is a male to male coax assembly, PE3C5887-12, can also be known as a low PIM type N plug to SMA plug cable assembly and will be shipped same-day as it is purchased. Type N plug to SMA plug cable assembly PE3C5887-12 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM N type male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5887-12 can also be used in the other direction and will be SMA male to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to SMA cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N male to SMA male low PIM cable 12 inch length using SPP-250-LLPL coax, LF solder. |
| 63 | ||
| PE3C5887-50CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 19.685 inches. Plenum N Male to SMA Male Low PIM Cable 50 cm Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum N male to SMA male low PIM cable 50 cm length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N male to SMA male low PIM cable 50 cm length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with N type cable connection on one end and SMA cable connection on the other. Our low PIM type N to SMA cable assemblies have a male gender on end 1 and male on end 2. This type N to SMA cable is a male to male coax assembly, PE3C5887-50CM, can also be known as a low PIM N type plug to SMA plug cable assembly and will be shipped same-day as it is purchased. Type N plug to SMA plug cable assembly PE3C5887-50CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM N type male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5887-50CM can also be used in the other direction and will be SMA male to type N male cable assembly if the opposite connectivity is required. Low PIM N type plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N male to SMA male low PIM cable 50 cm length using SPP-250-LLPL coax, LF solder. |
| 63 | ||
| PE3C5887-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 24 inches. Plenum N Male to SMA Male Low PIM Cable 24 Inch Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum N male to SMA male low PIM cable 24 inch length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N male to SMA male low PIM cable 24 inch length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and SMA cable connection on the other. Our low PIM type N to SMA cable assemblies have a male gender on end 1 and male on end 2. This N type to SMA cable is a male to male coax assembly, PE3C5887-24, can also be known as a low PIM type N plug to SMA plug cable assembly and will be shipped same-day as it is purchased. Type N plug to SMA plug cable assembly PE3C5887-24 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM N type male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5887-24 can also be used in the other direction and will be SMA male to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to SMA cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N male to SMA male low PIM cable 24 inch length using SPP-250-LLPL coax, LF solder. |
| 63 | ||
| PE3C5887-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 48 inches. Plenum N Male to SMA Male Low PIM Cable 48 Inch Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum N male to SMA male low PIM cable 48 inch length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N male to SMA male low PIM cable 48 inch length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with N type cable connection on one end and SMA cable connection on the other. Our low PIM type N to SMA cable assemblies have a male gender on end 1 and male on end 2. This type N to SMA cable is a male to male coax assembly, PE3C5887-48, can also be known as a low PIM type N plug to SMA plug cable assembly and will be shipped same-day as it is purchased. N type plug to SMA plug cable assembly PE3C5887-48 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM type N male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5887-48 can also be used in the other direction and will be SMA male to N type male cable assembly if the opposite connectivity is required. Low PIM type N plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N male to SMA male low PIM cable 48 inch length using SPP-250-LLPL coax, LF solder. |
| 63 | ||
| PE3W15887 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.4mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.92mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm. 2.4mm Female Bulkhead to 2.92mm Male Cable Using Tinned RG405 Coax. PE3W15887 is a 2.4mm female bulkhead to 2.92mm male cable using RG405 Tinned coax. This Pasternack 2.4mm female bulkhead to 2.92mm male cable assembly uses a 50 Ohm 2.4mm for connector 1 and a 50 Ohm 2.92mm for connector 2. Our female 2.4mm bulkhead to male 2.92mm cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W15887 2.4mm female bulkhead to 2.92mm male cable assembly is constructed with RG405 Tinned coax. | 0 | |||
| PE3W05887 | Pasternack Enterprises | Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm. MMCX Jack to SMA Male Right Angle Cable Using Tinned RG405 Coax. PE3W05887 is a MMCX jack to SMA male right angle cable using RG405 Tinned coax. This Pasternack MMCX jack to SMA male right angle cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm SMA for connector 2. MMCX to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our jack MMCX to male SMA right angle cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W05887 MMCX jack to SMA male right angle cable assembly is constructed with RG405 Tinned coax. | 0 | |||
| PE3W25887 | Pasternack Enterprises | 0 | ||||
![]() Vyrian | 1858879 | Phoenix Contact | Modular Terminal Block, 12A, 2.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 12,155 | ||
| CSD58872Q5D | Texas Instruments | 8,820 | ||||
| PQ25887RGET | Texas Instruments | Power Supply Support Circuit, Fixed, 1 Channel, PQCC24 | 5,487 | |||
| CSD58874W1015 | Texas Instruments | 5,458 | ||||
| MAX5887EGK/GG8 | Analog Devices Inc | D/A Converter, 1 Func, Serial Input Loading, 0.011us Settling Time RoHS : Not Compliant | 5,457 | |||
| MAX5887EGK+TD | Analog Devices Inc | D/A Converter, 1 Func, Parallel, Word Input Loading, 0.011us Settling Time RoHS : Compliant | 5,308 | |||
MSP430FR5887IRGCR![]() | Texas Instruments | RISC Microcontroller, 16-Bit, FRAM, MSP430 CPU, 16MHz, CMOS, PQCC64 RoHS : Compliant | 5,137 | |||
| CSD58879Q3D | Texas Instruments | 5,048 | ||||
| 5962-01-158-8745 | Texas Instruments | Decade Counter, Synchronous, Bidirectional, TTL, CDIP16 RoHS : Not Compliant | 4,809 | |||
MAX5887EGK-TD![]() | Maxim Integrated Products | D/A Converter, 1 Func, Parallel, Word Input Loading, 0.011us Settling Time RoHS : Not Compliant | 4,363 | |||
| BQ25887EVM | Texas Instruments | 3,399 | ||||
| CSD58873Q3D | Texas Instruments | 3,390 | ||||
MSP430FR5887IPM![]() | Texas Instruments | RISC Microcontroller, 16-Bit, FRAM, MSP430 CPU, 16MHz, CMOS, PQFP64 RoHS : Compliant | 3,132 | |||
BQ25887RGET![]() | Texas Instruments | Power Supply Management Circuit, Fixed, 1 Channel, PQCC24 RoHS : Compliant | 3,112 | |||
MSP430FR5887IPMR![]() | Texas Instruments | RISC Microcontroller, 16-Bit, FRAM, MSP430 CPU, 16MHz, CMOS, PQFP64 RoHS : Compliant | 3,091 | |||
![]() Win Source Electronics | BQ25887RGER![]() | Texas Instruments | IC BAT BALANCER LI-ION 2C 24VQFN RoHS : Compliant |
| 49,490 | |
| TC358870XBG | Toshiba America Electronic Components | RoHS : Compliant |
| 6,000 | ||
| TC358870XBG(NOK) | Toshiba America Electronic Components | Interface - Specialized HDMI Interface Brdge |
| 4,923 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |