 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
5BL-S16-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
 Avnet Americas | MMBZ5245BLT1G | onsemi | - Tape and Reel (Alt: MMBZ5245BLT1G) RoHS : Compliant |
| 642,000 | |
| ISOM5-175-B-L2 | Bourns Inc | TVS Varistor, 175 VAC, 225 VDC, IsoMOV, 470 V, Disc, Radial Leaded, 17 mm - Bulk (Alt: ISOM5-175-B-L2) RoHS : Compliant |
| 12,395 | ||
| MMBZ5235BLT1G | onsemi | - Tape and Reel (Alt: MMBZ5235BLT1G) RoHS : Compliant |
| 12,000 | ||
| ISOM5-175-B-L5 | Bourns Inc | IsoMOV 5KA 175Vrms Bulk In-Line - Bulk (Alt: ISOM5-175-B-L5) RoHS : Not Compliant |
| 6,823 | ||
| AB2025B-LW100-R | PUI Audio | Piezo Bender, 2.5 kHz, 0.08 UF, 500 ohm, 0.79" Dia, 0.01"" H" - Bag (Alt: AB2025B-LW100-R) RoHS : Compliant |
| 4,500 | ||
TLP185(BLL-TL,SE | Toshiba America Electronic Components | - Tape and Reel (Alt: TLP185(BLL-TL,SE) RoHS : Compliant |
| 3,000 | ||
| 2027-35-BLF | Bourns Inc | - Bulk (Alt: 2027-35-BLF) RoHS : Compliant |
| 400 | ||
| IS42VM16800H-75BLI | Integrated Silicon Solution Inc | - Trays (Alt: IS42VM16800H-75BLI) RoHS : Compliant | 142 | |||
| PI6C557-05BLE | Diodes Incorporated | Clock Generator, 200MHz, 3.135 V to 3.465 V, 4 Outputs, WTSSOP-20, -40 ?C to 85 ?C - Rail/Tube (Alt: PI6C557-05BLE) RoHS : Compliant |
| 56 | ||
| UTPSP55BLY | Panduit Corp | - Bulk (Alt: UTPSP55BLY) RoHS : Compliant |
| 0 | ||
| IS42VM32160G-5BLI-TR | Integrated Silicon Solution Inc | 512M, 1.8V, MOBILE SDRAM, 16MX32, 200MHZ, 90 BALL BGA (8MMX13MM) ROHS, T&R - Tape and Reel (Alt: IS42VM32160G-5BLI-TR) RoHS : Not Compliant | 0 | |||
| IS43LR16160J-5BLI | Integrated Silicon Solution Inc | 256M, 1.8V, MOBILE DDR, 16MX16, 200MHZ, 90 BALL BGA (8MMX10MM) ROHS, IT - Trays (Alt: IS43LR16160J-5BLI) RoHS : Not Compliant | 0 | |||
| JPCB-5-BLANK | Omega Engineering | JACK PANEL STANDARD CONNECTOR CONDUIT BOXES - Bulk (Alt: JPCB-5-BLANK) RoHS : Not Compliant |
| 0 | ||
| HLCD-10-18.15-BL-TH-4 | Samtec Inc | - Bulk (Alt: HLCD-10-18.15-BL-TH-4) RoHS : Compliant |
| 0 | ||
| HLCD-30-02.25-BL-BD-4 | Samtec Inc | - Bulk (Alt: HLCD-30-02.25-BL-BD-4) RoHS : Compliant |
| 0 | ||
 Newark | TRD695BL-20 | L-com Inc | Enet Cord, Cat6, Rj45 Plug-Plug, 20'; |L-Com TRD695BL-20 RoHS : Compliant |
| 154 | |
| 3085BL | Davies Molding LLC | Ccbar Blk M6 X 1 X 0.79[20] Ps Rohs Compliant: Yes |Davies Molding 3085BL RoHS : Compliant |
| 109 | ||
| 364A595BL | Bomar Interconnect Products Inc | Rf/Coaxial, Bnc Jack, R/A, 50 Ohm, Solder; Connector Type:Bnc Coaxial; Connector Body Style:Right Angle Jack; Coaxial Termination:Solder; Impedance:50Ohm; Coaxial Cable Type:-; Contact Material:Phosphor Bronze; Frequency Max:4Ghz Rohs Compliant: Yes RoHS : Compliant |
| 100 | ||
| AB2065B-LW100-R | PUI Audio | Piezo Bender, 6.5Khz, 0.014 Uf, 500R; |Pui Audio AB2065B-LW100-R RoHS : Compliant |
| 98 | ||
| AT85 BLACK 10M X 19MM | Advance Tapes International Ltd | Tape, Polythene Film, 10M X 19Mm; |Advance Tapes AT85 BLACK 10M X 19MM RoHS : Compliant |
| 32 | ||
| FPS-016-4025-BLK | pro-power | Heat Shrink Tubing, 6.35Mm Id, Po, Black, Pk Of 25 4Ft (1.2M) Pcs; Shrink Ratio:2:1; I.d. Supplied - Imperial:0.25"; I.d. Supplied - Metric:6.35Mm; Shrink Tubing/Boot Colour:Black; Length - Imperial:4Ft; Length - Metric:1.2M Rohs Compliant: Yes RoHS : Compliant |
| 31 | ||
N201-015-BL | Tripp Lite | Network Cable, Cat6/5/E, 4.572M, Blue; L |Eaton Tripp Lite N201-015-BL RoHS : Compliant |
| 24 | ||
| TFCLS6005-BLK | L-com Inc | Networking Cable, Tinned Copper, 6.99Mm; |L-Com TFCLS6005-BLK RoHS : Compliant |
| 13 | ||
| TRD695SRA15BLU-7 | L-com Inc | Ethernet Cbl, Cat6; |L-Com TRD695SRA15BLU-7 RoHS : Compliant |
| 11 | ||
| E55BLT1E | Eaton Cutler-Hammer | 5 Way Ls Style Prox 30Mm Sn 2Wac Cable; |Eaton Cutler Hammer E55BLT1E RoHS : Not Compliant |
| 10 | ||
| N204-S15-BL-LA | Tripp Lite | Patch Cord, Rj45 Plug-Rj45 Plug, 15Ft; |Eaton Tripp Lite N204-S15-BL-LA RoHS : Compliant |
| 8 | ||
| TRD695SRA5BL-3 | L-com Inc | Enet Cord, Cat6, R/A Rj45 Plug-Plug, 3'; |L-Com TRD695SRA5BL-3 RoHS : Compliant |
| 3 | ||
| LUCB05BL | Schneider Electric | Control Unit, Advanced, Tesys U; |Schneider Electric LUCB05BL RoHS : Compliant |
| 2 | ||
| FMCA2605/BL-120 | Fairview Microwave Inc | Cbl Assy, Hd Bnc Plug-1.0/2.3 Plug, 120"; |Fairview Microwave FMCA2605/BL-120 RoHS : Not Compliant |
| 1 | ||
| TFCLS6005-BLK-100F | L-com Inc | Networking Cable, Cat6A, 26Awg, 100; |L-Com TFCLS6005-BLK-100F RoHS : Compliant |
| 1 | ||
 Analog Devices Inc | HMC815BLC5TR | Analog Devices Inc | Mixer, Upconverter RoHS : Compliant |
| 2,400 | |
| HMC625BLP5E | Analog Devices Inc | Digital VGA RoHS : Compliant |
| 72 | ||
| HMC815BLC5 | Analog Devices Inc | Mixer, Upconverter RoHS : Compliant |
| 44 | ||
| EV1HMC815BLC5 | Analog Devices Inc | EVALUATION PCB ASSEMBLY RoHS : Not Compliant |
| 20 | ||
| 116960-HMC625BLP5 | Analog Devices Inc | HMC625BLP5 EVALUATION PCB ASSE RoHS : Not Compliant | 17 | |||
| HMC815BLC5TR-R5 | Analog Devices Inc | Mixer, Upconverter RoHS : Compliant |
| 0 | ||
| HMC625BLP5ETR | Analog Devices Inc | Digital VGA RoHS : Compliant |
| 0 | ||
 RS | N201-015-BL | Tripp Lite | TRIPP LITE 15FT CAT6 GIGABIT SNAGLESS MOLDED PATCH CABLE RJ45 M/M BLUE 15 |
| 578 | |
| 1925BL | Davies Molding LLC | 1.25 " CONTROL KNOB WITH A .25 THRU-HOLE W/INLAY AND INDICATOR LINE |
| 100 | ||
| CX2.5/BL | Altech Corporation | CONNECTOR, TERMINAL BLOCK, DIN RAIL, SPRING CLAMP, SINGLE LEVEL, BLACK, 5MM RoHS : Unknown |
| 69 | ||
| PUN-10X1,5-BL (159668) | Festo | PLASTIC TUBING, BLUE, POLYURETHANE, 1 EA1 METER, 50M LENGTH, 10MMOD, PUN SERIES |
| 50 | ||
| PUN-H-F-8X1,25-BL (8153395) | Festo | POLYURETHANE TUBING, FOOD-SAFE, 8MM, BLUE, 1 EA 1 M |
| 50 | ||
| MHDEPPK15BLACKK | Northern Technologies Corporation | HOOD D-SUB 15POS STRAIGHTEXIT CPSERIES PLASTIC 11.50MMCBLDIA |
| 45 | ||
| TRD815BLK-7 | L-com Inc | NETWORK CABLE ASSEMBLY, CAT 5E, RJ45/RJ45, BLACK, TRD815 SERIES RoHS : Compliant |
| 39 | ||
| N6PATCH5BL | StarTech | CAT6 ETHERNET CABLE - 5 FT - BLUE - PATCH CABLE - SNAGLESS CAT6 CABLE - SHORT |
| 10 | ||
| LUCB05BL | Schneider Electric | TESYS 1.5 KW CONTROL MODULE, 24 VDC, 1.25, 5 A RoHS : Compliant |
| 9 | ||
| 364A595BL | Bomar Interconnect Products Inc | CONN, RF, BNC, RIGHT ANGLE, PCB JACK, 50OHMS, BODY:WHITE VALOX, CNTPLATING:GOLD RoHS : Compliant |
| 6 | ||
| FLCDMC5BLY | Panduit Corp | PRE-POLISHED LC DUPLEX OPTICAM STYLE OM2 CONNECTOR, NATURAL RoHS : Compliant |
| 2 | ||
| M21-375-595-BL (142806) | Brady Worldwide Inc | CART M21 B595 0.375INX21FT WHITE ON BLUE |
| 2 | ||
| WIRRJ45BLRL | StarTech | BULK CAT 5E ETHERNET CABLE - 1000 FT. - STRANDED - BLUE |
| 1 | ||
| TRD695BLK-20 | L-com Inc | NETWORK CABLE ASSEMBLY, CAT 6,RJ45/RJ45,BLACK RoHS : Compliant |
| 1 | ||
| DX80N2Q45BL-RG | Banner Engineering Corp | SENSOR, WIRELESS, Q45, BUTTON/LIGHT, 2.4GHZ, 65MW, RED/GREEN LED, 29044 |
| 1 | ||
 STMicroelectronics | Z00607MA 5BL2 | STMicroelectronics | 0.8A standard Triacs |
| 278 | |
 Microchip Technology Inc | ZL30735BLDG1 | Microchip Technology Inc | 5-channel, 10-output enhanced 1588 timing card, VQFN, Projected EOL: 2051-09-09 RoHS : Compliant |
| 780 | |
| TFS1575BL | Microchip Technology Inc | TFS1575BL, Projected EOL: 2051-07-31 - Contact for Pricing | 0 | |||
| APT6025BLLG | Microchip Technology Inc | MOSFET MOS 7 600 V 250 mOhm TO-247, TO-247, Projected EOL: 2046-04-30 RoHS : Compliant |
| 0 | ||
| APT30M75BLLG | Microchip Technology Inc | MOSFET MOS 7 300 V 75 mOhm TO-247, TO-247, Projected EOL: 2046-04-30 RoHS : Compliant |
| 0 | ||
| DSC1505BL3A-50M00000 | Microchip Technology Inc | MEMS OSC, LVCMOS, 50MHz, 20ppm, 1.8v, -40 to 105C, 5.0x3.2mm, VDFN, Projected EOL: 2051-07-01 RoHS : Compliant |
| 0 | ||
| DSC1505BL3A-100M0000 | Microchip Technology Inc | MEMS OSC, LVCMOS, 100MHz, 20ppm, 1.8v, -40 to 105C, 5.0x3.2mm, VDFN, Projected EOL: 2051-07-01 RoHS : Compliant |
| 0 | ||
| DSC1505BL3A-50M00000T | Microchip Technology Inc | MEMS OSC, LVCMOS, 50MHz, 20ppm, 1.8v, -40 to 105C, 5.0x3.2mm, VDFN, Projected EOL: 2051-07-01 RoHS : Compliant |
| 0 | ||
| DSC1505BL3A-100M0000T | Microchip Technology Inc | MEMS OSC, LVCMOS, 100MHz, 20ppm, 1.8v, -40 to 105C, 5.0x3.2mm, VDFN, Projected EOL: 2051-07-01 RoHS : Compliant |
| 0 | ||
 Bisco Industries | MPP-1605 BLACK | Caplugs | 4,548 | |||
| BPF-SI-415 BLACK | Caplugs | 850 | ||||
| SLV-105-12X.295 BLACK | Misc Wire Cable Tubing Sleeve | 600 | ||||
| R6-32X7/8-2615-BLKOX-TP | MACHINE SCREWS | 400 | ||||
| R2-56X1/4-2615-BLKOX-TP | MACHINE SCREWS | 147 | ||||
| STB15-BLANK-1 | TE Connectivity | 146 | ||||
| HTSEC90-075-BLK | MISC. FITTINGS/ELBOWS | 100 | ||||
| 2815-BLK | MISC. VIBRATION MOUNTS & BUMPERS | 81 | ||||
| C.75BL6 | Panduit Corp | 66 | ||||
| RD1-35-BLUE | MISC. VIBRATION MOUNTS & BUMPERS | 50 | ||||
| C6ASLSS-15BLU | MISC CABLE ASSEMBLY | 16 | ||||
| CEP-25 BLACK | Caplugs | 13 | ||||
| DCC-15 BLACK | Caplugs | 8 | ||||
| MC-JM45BL | Sugatsune Kogyo Co Ltd | 8 | ||||
| CL65BL6R8KPE | MISCELLANEOUS | 1 | ||||
 Rochester Electronics | MMBZ5225BLT1G | onsemi | Zener Diode Single 3V 225mW SOT-23-3 T/R RoHS : Compliant |
| 230,713 | |
| SZMMBZ5235BLT3G | onsemi | 225 mW; 5% Zener Diode Voltage Regulator RoHS : Compliant |
| 130,000 | ||
| SZMMBZ5245BLT1G | onsemi | Zener Diode Single 15V 225mW SOT-23-3 T/R RoHS : Compliant |
| 59,635 | ||
LM385BLP-2-5 | Texas Instruments | IC VOL REF Shunt Fixed 2.5V 20mA ±1.5% TO-226-3 Bulk RoHS : Compliant |
| 2,340 | ||
| LM385BLPR-2-5 | Texas Instruments | IC VOL REF Shunt Fixed 2.5V 20mA ±1.5% TO-226-3 T/R RoHS : Compliant |
| 60,000 | ||
AM27S25/BLA | AMD | OTP ROM, 16KX8, 45ns, Bipolar, CDIP24 RoHS : Not Compliant |
| 336 | ||
| LM5575BLDT/NOPB | National Semiconductor Corporation | Switching Regulator RoHS : Compliant |
| 22 | ||
| HZ5BLL90 | Renesas Electronics Corporation | Zener Diode, 0.25W RoHS : Not Compliant |
| 26,000 | ||
| HZ5BLL90TA | Renesas Electronics Corporation | Zener Diode, 0.25W RoHS : Not Compliant |
| 10,000 | ||
| HZ5BLLRE-E | Renesas Electronics Corporation | Zener Diode, 0.25W, Silicon, Unidirectional, DO-35 RoHS : Compliant |
| 55,250 | ||
| HZ5BLLTA-E | Renesas Electronics Corporation | Zener Diode, 0.25W, Silicon, Unidirectional, DO-35 RoHS : Compliant |
| 4,500 | ||
| HZK5BLL-JTL | Renesas Electronics Corporation | HZK5BLL - Epitaxial Planar Zener Diode for Hard Knee Low Noise ' RoHS : Not Compliant |
| 375,000 | ||
| HZU5BLL-JTLF | Renesas Electronics Corporation | Epitaxial Planar Zener Diode for Hard Knee Low Noise RoHS : Compliant |
| 3,000 | ||
| HZU5BLL-JTLF-E | Renesas Electronics Corporation | Epitaxial Planar Zener Diode for Hard Knee Low Noise RoHS : Compliant |
| 99,000 | ||
| M51955BL#TF0J | Renesas Electronics Corporation | Voltage Detecting, System Resetting IC RoHS : Not Compliant |
| 108,023 | ||
 Sager | NK6PC5BLY-Q | Panduit Corp | Ethernet Cables / Networking Cables Netkey copper patch cord, category 6, 5 | 0 | ||
| AT16/M16/SF45/BLY | ABB Group | Conduit Fittings & Accessories |
| 0 | ||
| AT42/M40/S45/BLY | ABB Group | Conduit Fittings & Accessories |
| 0 | ||
| UTP6A45BL | Panduit Corp | Ethernet Cables / Networking Cables Copper Patch Cord, Cat 6A, Black UTP Cab RoHS : Compliant | 0 | |||
| UTPSP55BLY | Panduit Corp | Ethernet Cables / Networking Cables Copper Patch Cord, Cat 6, Black UTP Cabl RoHS : Compliant |
| 0 | ||
| HLCD-10-18.15-BL-TH-4 | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant |
| 0 | ||
| HLCD-30-02.25-BL-BD-4 | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant |
| 0 | ||
| 800-5A5-BL | Carling Technologies | Rotary Switches 8005A5BL |
| 0 | ||
| FDFF45BL | Panduit Corp | Wire Ducting & Raceways ODF Front-Access Frame 45RU - Black | 0 | |||
| SP75/BL/10M | ABB Group | Conduit Fittings & Accessories | 0 | |||
| UJPBU45BL | Panduit Corp | Ethernet Cables / Networking Cables Zone Cord, Cat 6 UTP Solid Plenum Blue C RoHS : Compliant | 0 | |||
| VP5BL | Switchcraft Conxall | Audio Cables / Video Cables / RCA Cables VIDEO PATCH CD BLUE RoHS : Not Compliant | 0 | |||
| VP5BLX | Switchcraft Conxall | Audio Cables / Video Cables / RCA Cables STD VP PATCH CORD BLUE, 5 FT, RoHS |
| 0 | ||
| AL21/M20/S45/BL | ABB Group | Conduit Fittings & Accessories | 0 | |||
| AL28/PG21/S45/BL | ABB Group | Conduit Fittings & Accessories |
| 0 | ||
 Coilcraft Direct | JA4575-BLD | Coilcraft Inc | Dual inductor, for Class D, RoHS RoHS : Compliant |
| 2,984 | |
| DFT7160-105BLC | Coilcraft Inc | Filter, data line, SMT, RoHS RoHS : Compliant |
| 1,322 | ||
| BU9-103R25BL | Coilcraft Inc | Common mode choke, power line, RoHS RoHS : Compliant |
| 1,180 | ||
| TTWB-1.5-BLD | Coilcraft Inc | Wideband RF transformer, SMT, RoHS RoHS : Compliant |
| 749 | ||
| HA3585-BLD | Coilcraft Inc | Transformer, for Akros AS1113, SMT, RoHS RoHS : Compliant |
| 276 | ||
| DFT7160-475BLC | Coilcraft Inc | Filter, data line, SMT, RoHS RoHS : Compliant |
| 222 | ||
| DFT7160-225BLC | Coilcraft Inc | Filter, data line, SMT, RoHS RoHS : Compliant |
| 203 | ||
| BU9H-103R25BL | Coilcraft Inc | Common mode choke, power line, RoHS RoHS : Compliant |
| 68 | ||
| BU16-4021R5BL | Coilcraft Inc | Common mode choke, signal line, RoHS RoHS : Compliant |
| 52 | ||
| BU9H-2820R5BL | Coilcraft Inc | Common mode choke, power line, RoHS RoHS : Compliant |
| 27 | ||
| BU9HS-153R15BL | Coilcraft Inc | Common mode choke, signal line, RoHS RoHS : Compliant |
| 6 | ||
| BU9S-153R15BL | Coilcraft Inc | Common mode choke, signal line, RoHS RoHS : Compliant |
| 2 | ||
| Z9265-BL | Coilcraft Inc | NOT RoHS. Power factor controller transformer for ST PFCL6561D RoHS : Compliant |
| 0 | ||
| A9785-BLD | Coilcraft Inc | Output choke, for NSC LM5030, SMT, RoHS RoHS : Compliant |
| 0 | ||
| BU16-4530R5BL | Coilcraft Inc | Common mode choke, signal line, RoHS RoHS : Compliant |
| 0 | ||
 TME | 165BL5E TEMFLEX | 3M | Tape: electrical insulating; W: 19mm; L: 20m; Thk: 0.152mm; blue |
| 74 | |
| 155BL5E TEMFLEX | 3M | Tape: electrical insulating; W: 19mm; L: 20m; Thk: 0.127mm; blue |
| 42 | ||
| 6715 BL005 | Alpha Wire | Wire; EcoWire®; EcoGen®,HookUp Wire; stranded; Cu; 18AWG; MPPE |
| 14 | ||
| 3075 BL005 | Alpha Wire | Wire; HookUp Wire; stranded; Cu; 18AWG; PVC; blue; 600V; 30.5m |
| 9 | ||
| 6715 BL001 | Alpha Wire | Wire; EcoWire®; EcoGen®,HookUp Wire; stranded; Cu; 18AWG; MPPE |
| 4 | ||
| 1565 BL005 | Alpha Wire | Wire; HookUp Wire; 18AWG; wire; Cu; PVC; blue; 1kV; 30.5m; 100ft |
| 0 | ||
| 2711-IEC-25BL | electro-PJP | Test lead: single; 12A; banana plug 4mm,both sides; Len: 0.25m |
| 0 | ||
| 2017-25BL | electro-PJP | Test lead: single; 60VDC; 30VAC; 36A; banana plug 4mm,both sides |
| 0 | ||
| 3SU1050-5BL21-0AA0 | Siemens | Switch: rotary with key; 22mm; Stabl.pos: 3; black; none; IP67 RoHS : Compliant |
| 0 | ||
| 1805 BL005 | Alpha Wire | Wire; HookUp Wire; 30AWG; wire; Cu; ETFE; blue; 30.5m; 100ft; 1x30AWG |
| 0 | ||
| 2019-25BL | electro-PJP | Test lead: single; 60VDC; 30VAC; 20A; banana plug 4mm,both sides |
| 0 | ||
| 2027-35-BLF | Bourns Inc | Arrester: surge arrester; THT; Ubr type: 350V; 10kA; -55÷125°C RoHS : Compliant |
| 0 | ||
| 2210/600V-25BL | electro-PJP | Test lead: single; 12A; banana plug 4mm,both sides; Urated: 600V |
| 0 | ||
| 300SP1J5BLKM7QE | E-Switch Inc | ROCKER; SPDT; ON-ON; 5A/120VAC; 5A/28VDC; black; 300; Leads: for PCB RoHS : Unknown |
| 0 | ||
| 1555 BL001 | Alpha Wire | Wire; HookUp Wire; stranded; Cu; 18AWG; PVC; blue; 1kV; 305m; 1x18AWG |
| 0 | ||
 Ameya Holding Limited | PZU15BL,315 | Nexperia | DIODE ZENER 15V 250MW SOD882 RoHS : Compliant | 120,000 | ||
| SZMMBZ5235BLT3G | onsemi | DIODE ZENER 6.8V 225MW SOT23-3 RoHS : Compliant | 60,000 | |||
| IS62WV25616BLL55BLI | Integrated Silicon Solution Inc | 2,032 | ||||
LM385BLP-1-2 | Texas Instruments | Micropower Voltage References RoHS : Compliant | 1,000 | |||
IS62WV25616BLL-55BLI | Integrated Silicon Solution Inc | 4MB, LOW POWER/POWER SAVER,ASYNC,256K X 16,55NS,2.5V~3.6V,48 BALL MBGA (6X8 RoHS : Compliant | 441 | |||
 ComSIT USA | 3075BL | ALPHA WIRE | AVAILABLE EU | 1,059 | ||
| IS42RM32400H75BLI | INTEGRATED SILICON SOLUTION INC (ISSI) | AVAILABLE EU | 26 | |||
| S7825BL | U LINE | AVAILABLE EU | 86 | |||
| IS42RM32800K75BLI | INTEGRATED SILICON SOLUTION INC (ISSI) | AVAILABLE EU | 861 | |||
ComSIT USA | Z00607MA5BL2 | STMicroelectronics | 0.8A STANDARD TRIAC 4 Quadrant Logic Level TRIAC, 600V V(DRM), 0.8A I(T)RMS, TO-92 RoHS : Compliant | 8,000 | ||
| MMA020415BL13K7D | Vishay Intertechnologies | Electronic Component RoHS : Compliant | 6,000 | |||
| HSMP3895BLKG | Avago Technologies | SURFACE MOUNT RF PIN SWITCH DIODE Pin Diode, 100V V(BR), Silicon RoHS : Compliant | 5,800 | |||
| HSMS2825BLKG | Avago Technologies | SURFACE MOUNT RF SCHOTTKY BARRIER DIODE Mixer Diode, C Band, Silicon RoHS : Compliant | 4,374 | |||
| MMA020415BL5K9D | Vishay Intertechnologies | Electronic Component RoHS : Compliant | 3,000 | |||
| MMA020415BL402RB | Vishay Intertechnologies | Electronic Component RoHS : Compliant | 3,000 | |||
| MMU010225BL402RF | Vishay Intertechnologies | Electronic Component RoHS : Compliant | 3,000 | |||
| MMBZ5245BLT1 | Motorola Semiconductor Products | 225 MILLI WATT SOT-23 SURFACE MOUNT ZENER VOLTAGE REGULATOR Zener Diode, 15V V(Z), 5%, 0.225W, Silicon, Unidirectional, TO-236AB RoHS : Not Compliant | 3,000 | |||
| HMPS2825BLK | Avago Technologies | MINIPAK SURFACE MOUNT RF SCHOTTKY BARRIER DIODE Mixer Diode, C Band, Silicon RoHS : Compliant | 1,400 | |||
| HSMS2855BLKG | Avago Technologies | SURFACE MOUNT ZERO BIAS SCHOTTKY DETECTOR DIODE Mixer Diode, Zero Barrier, L Band, Silicon RoHS : Compliant | 1,400 | |||
| IS42S32160A75BLITR | Integrated Silicon Solution Inc | 4M WORDS X 32 BITS X 4 BANKS (512-MBIT) SYNCHRONOUS DYNAMIC RAM Synchronous DRAM, 16MX32, 6ns, CMOS, PBGA90 RoHS : Compliant | 250 | |||
| HSMS2805BLKG | Avago Technologies | SURFACE MOUNT RF SCHOTTKY BARRIER DIODE Mixer Diode, Silicon RoHS : Compliant | 200 | |||
| IS62WV102416EBLL45BLI | Integrated Silicon Solution Inc | Standard SRAM, 1MX16, 45ns, CMOS, PBGA48 RoHS : Not Compliant | 164 | |||
| ML7105C001GDZ05BL | LAPIS Semiconductor Co Ltd | BLUETOOTH LOW ENERGY Telecom Circuit, 1-Func, PQCC32 RoHS : Compliant | 100 | |||
| IS42VM16800H75BLI | Integrated Silicon Solution Inc | Synchronous DRAM, 8MX16, 6ns, CMOS, PBGA54 RoHS : Not Compliant | 18 | |||
 Interstate Connecting Components | M4C-500-595-BL-WT | Brady Worldwide Inc | M4C-500-595-BL-WT 170813M4C-500-595-BL-WT |
| 1 | |
| AB-DC05BL-DCBR-QE004 | Amphenol LTW Technology | X-LOK, LARGE SIZE, PLASTIC, 20 OVERMOLDED | 0 | |||
| SC-L-PG11-05-BL | Amphenol LTW Technology | CABLE JOINER, FICX PG11, PLAST FIELD INSTALLABLE | 0 | |||
| SC-L-UL11-05-BL | Amphenol LTW Technology | CABLE JOINER, FICX UL11, PLAST FIELD INSTALLABLE | 0 | |||
| AB-CB05BL-CBBR-QD010 | Amphenol LTW Technology | X-LOK, MIDDLE SIZE, PLASTIC, 1 OVERMOLDED | 0 | |||
| M24758-5BL | Glenair Inc | 0 | ||||
| AB-CB05BL-CBBL-QD004 | Amphenol LTW Technology | X-LOK, MIDDLE SIZE, PLASTIC, 1 OVERMOLDED | 0 | |||
| AB-BD05BL-BDBR-QD002 | Amphenol LTW Technology | X-LOK, STANDARD SIZE, PLASTIC, OVERMOLDED | 0 | |||
| ITS3106AGG24-10SN5-BL | Glenair Inc | 0 | ||||
| AB-BD05BL-BDBL-QD002 | Amphenol LTW Technology | X-LOK, STANDARD SIZE, PLASTIC, OVERMOLDED | 0 | |||
| STB15-BLANK-7 | TE Connectivity | STB15-BLANK-7 | 0 | |||
| 171-008-20P-P5BL-513 | Glenair Inc | MICRO-D CONNECTOR | 0 | |||
| AB-BD05BL-BDBR-QD010 | Amphenol LTW Technology | X-LOK, STANDARD SIZE, PLASTIC, OVERMOLDED | 0 | |||
| AB-CB05BL-CBBR-QD005 | Amphenol LTW Technology | X-LOK, MIDDLE SIZE, PLASTIC, 1 OVERMOLDED | 0 | |||
| AB-DC05BL-DCBL-QE004 | Amphenol LTW Technology | X-LOK, LARGE SIZE, PLASTIC, 20 OVERMOLDED | 0 | |||
 NexGen Digital | MMBZ5225BLT1G | onsemi | RoHS : Compliant | 3,000 | ||
| HSMS-2865-BLKG | Avago Technologies | RoHS : Compliant | 300 | |||
| CRO2665B-LF | Z-Communications Inc | 191 | ||||
| CRO2715B-LF | Z-Communications Inc | 76 | ||||
| T9A269685BL | GLOBAL INDUSTRIAL | 27 | ||||
| DB25M-RJ45 BLK | AIM Metals & Alloys LP | 18 | ||||
| TRD815BLK-10 | L-com Inc | RoHS : Compliant | 10 | |||
 PEI Genesis | CPA100-0125-BLK-STK4FT | DSG-Canusa |
| 2,354 | ||
| SDHH-15BL | Cinch Connectivity Solutions |
| 722 | |||
| 15BL5822 | ITT Interconnect Solutions |
| 223 | |||
| 04E00055-BL22 | SOURIAU-SUNBANK |
| 0 | |||
| DCC.30.35B.LAG | LEMO connectors | RoHS : Compliant |
| 0 | ||
| NX307005B-L | Amphenol Corporation |
| 0 | |||
| CPX100-0375-BLK | DSG-Canusa |
| 0 | |||
| 21A1015BL1606CN | SOURIAU-SUNBANK |
| 0 | |||
| 04E00055-BL12 | SOURIAU-SUNBANK |
| 0 | |||
| 21A1015BL1404CN | SOURIAU-SUNBANK |
| 0 | |||
| 04E00055-BL14 | SOURIAU-SUNBANK |
| 0 | |||
| CPA100-0375-BLK-SP200 | DSG-Canusa |
| 0 | |||
| SDH-25BLL | Cinch Connectivity Solutions |
| 0 | |||
| 100RN21S-4A5BL | Amphenol Phoenix Interconnect |
| 0 | |||
| 04E00055-BL16 | SOURIAU-SUNBANK |
| 0 | |||
 Powell Electronics | STB15-BLANK-1 | TE Connectivity | Connectors |
| 2,640 | |
| CY2.5/BL | Altech Corporation | DIN Term Blk, Screw, Feed-Thru |
| 2,291 | ||
| CXS2.5/BL | Altech Corporation | DIN Term Blk, Spring, Feed-Thru RoHS : Compliant |
| 1,216 | ||
| CP2.5/BL | Altech Corporation | DIN Term Blk, Push-In, Feed-Thru |
| 981 | ||
| NBNC75BLP9 | Neutrik USA Inc | Cable end BNC rearTWIST -Cable O.D. 4 - RoHS : Compliant |
| 528 | ||
| NBNC75BLP7X | Neutrik USA Inc | Cable end BNC rearTWIST -Cable O.D. 4 - RoHS : Compliant |
| 462 | ||
| STB15-BLANK-5 | TE Connectivity | Connectors |
| 396 | ||
| CX2.5/BL | Altech Corporation | DIN Term Blk, Spring, Feed-Thru RoHS : Unknown |
| 330 | ||
| NBNC75BLS7 | Neutrik USA Inc | Cable end BNC rearTWIST -Cable O.D. 4 - RoHS : Compliant |
| 264 | ||
| NBNC75BLP9X | Neutrik USA Inc | BNC Connector RoHS : Compliant |
| 217 | ||
| TPR4825BL22N | TE Connectivity | Connectors |
| 185 | ||
| 86303645BLF | Amphenol FCi | Cable Assembly |
| 132 | ||
| CPDL2.5/BL | Altech Corporation | DIN Term Blk, Push-In, Dbl Level |
| 94 | ||
| 1485BL1 | Hammond Manufacturing | DROP HANGER RoHS : Compliant |
| 7 | ||
| CP1.5/BL | Altech Corporation | DIN Term Blk, Push-In, Feed-Thru |
| 5 | ||
 PUI | AB2025B-LW100-R | PUI Audio | 1,000 | |||
 Richardson RFPD | TX2045B-LZ1-40.000 | Raltron Electronics Corporation | OSCILLATOR CRYSTAL RoHS : Compliant | 0 | ||
| 364A595BL | Winchester Interconnect | Conn BNC F 0Hz to 4GHz 50Ohm Solder RA Thru-Hole G RoHS : Compliant |
| 0 | ||
| HMC815BLC5TR | Analog Devices Inc | Up/Down Conv Mixer 27GHz 32-Pin CLLCC EP T/R RoHS : Compliant |
| 0 | ||
| 364A595BLT | Winchester Interconnect | BNC PC Board Right Angle Jack RoHS : Compliant | 0 | |||
| 364F595BLB | Winchester Interconnect | Conn BNC F Solder RA Thru-Hole Gold RoHS : Compliant | 0 | |||
| HMC815BLC5TR-R5 | Analog Devices Inc | Up/Down Conv Mixer 27GHz 32-Pin CLLCC EP T/R RoHS : Compliant |
| 0 | ||
| 364A595BLB | Winchester Interconnect | Conn BNC F 0Hz to 4GHz 50Ohm Solder RA Thru-Hole G RoHS : Compliant |
| 0 | ||
| HMC625BLP5ETR | Analog Devices Inc | RF Amp Single VGA 5GHz 5.6V 32-Pin LFCSP EP T/R RoHS : Compliant |
| 0 | ||
| EV1HMC815BLC5 | Analog Devices Inc | HMC815BLC5 Up-Down Converter and Mixer Evaluation RoHS : Not Compliant |
| 0 | ||
| 564A595BL | Winchester Interconnect | Conn TNC F Solder RA Thru-Hole Gold RoHS : Compliant | 0 | |||
| HMC625BLP5E | Analog Devices Inc | RF Amp Single VGA 5GHz 5.6V 32-Pin LFCSP EP T/R RoHS : Compliant |
| 0 | ||
| 364A795BLB | Winchester Interconnect | BNC PC Board Right Angle Jack RoHS : Compliant |
| 0 | ||
| 364A595BLBT | Winchester Interconnect | RF Coax Brd Mt Conn RoHS : Compliant | 0 | |||
| 364A795BL | Winchester Interconnect | Conn BNC F 0Hz to 1GHz 75Ohm Solder RA Thru-Hole G RoHS : Compliant |
| 0 | ||
| 364A595BLBC | Winchester Interconnect | Conn BNC F 0Hz to 4GHz 50Ohm Solder RA Thru-Hole G RoHS : Compliant | 0 | |||
 Rutronik | TLP785(BL-TP6,F(C | Toshiba America Electronic Components | COUPLER SMD4 200-600% 5mA 80V RoHS : Compliant |
| 16,000 | |
| EPDX00KY3005BLUE | LYNXEO | Wire Cable KY30 05 BLUE RoHS : Compliant |
| 4,250 | ||
| TLP185(BLL-TL,SE(T | Toshiba America Electronic Components | COUPLER SO-6 200-400% 5mA RoHS : Compliant |
| 3,000 | ||
 Chip 1 Exchange | DS-02005-B(LV) | Littelfuse Inc | INSTOCK | 39,000 | ||
| HZ5BLLTA-E | INSTOCK | 20,000 | ||||
| IS65WV12816BLL-55BLA3 | Integrated Silicon Solution Inc | INSTOCK RoHS : Compliant | 7,388 | |||
| MMA0204-15BL20K1% | Vishay Beyschlag | INSTOCK | 6,600 | |||
| MMA0204-25BL4K810.1 | Vishay Beyschlag | INSTOCK | 3,000 | |||
| IS65WV12816BLL-55BLA3 | INSTOCK | 1,888 | ||||
| 88E6065B##-LAJ1C000 | Marvell Technology Group Ltd | INSTOCK | 1,541 | |||
| MP7545BLN | INSTOCK | 1,160 | ||||
| MMA0204-25BL200K+-0,1% | Vishay Beyschlag | INSTOCK | 756 | |||
| MMA0204-25BL100K+-0,1% | Vishay BCcomponents | INSTOCK | 729 | |||
| MMA0204-25BL261K+-0,1% | Vishay Beyschlag | INSTOCK | 707 | |||
| FDC37C65BLJP | SMSC | INSTOCK | 390 | |||
| MMA0204-25BL100K+-0,1% | Vishay Beyschlag | INSTOCK | 280 | |||
FT245BL | FTDI Chip | INSTOCK RoHS : Compliant | 14 | |||
| 1SCU/W701-24/CAT5-BL/REV.1 | INSTOCK | 1 | ||||
 Avnet Abacus | 15BL5822 | ITT Interconnect Solutions | Connector Accessories Individual Wire Seals Blue (Alt: 121668-0033) RoHS : Compliant | 20,000 | ||
| IND065BLV | OmniOn Power Inc | Non Isolated Board Mount DCDC Converter SMD Open Frame 65 W 16 V 34 V 406 A 96 V 144 V (Alt: 1600102911A) RoHS : Compliant | 0 | |||
| CV275K5BL1 | Bourns Inc | (Alt: CV275K5BL1) RoHS : Compliant | 0 | |||
| TRS5-85BLRU | KEMET Corporation | Thermal Reed Switch 25C Analog Flange Mount 2Pin Axial Box (Alt: TRS5-85BLRU) RoHS : Compliant | 0 | |||
| TRS5-15BLRU | KEMET Corporation | (Alt: TRS5-15BLRU) RoHS : Compliant | 0 | |||
| V24C5C125BL | Vicor Power | Module DCDC SingleOut 5V 25A 125W Screw MountThrough Hole 7Pin Quarter Brick (Alt: V24C5C125BL) RoHS : Not Compliant | 0 | |||
| 91615-305BLF | Amphenol Corporation | (Alt: 91615-305BLF) RoHS : Compliant | 0 | |||
| TRS5-65BLRVU | KEMET Corporation | Thermal Reed Switch 25C Analog Flange Mount 2Pin Axial Box (Alt: TRS5-65BLRVU) RoHS : Compliant | 0 | |||
V48C24T75BL2 | Vicor Power | Module DCDC SingleOut 24V 313A 75W Screw MountThrough Hole 7Pin Quarter Brick (Alt: V48C24T75BL2) RoHS : Not Compliant | 0 | |||
| TRS5-105BLRU | KEMET Corporation | (Alt: TRS5-105BLRU) RoHS : Compliant | 0 | |||
| TRS5-75BLRVU | KEMET Corporation | (Alt: TRS5-75BLRVU) RoHS : Compliant | 0 | |||
| V24C3V3C75BL | Vicor Power | (Alt: V24C3V3C75BL) RoHS : Not Compliant | 0 | |||
| ISOM5-175-B-L2 | Bourns Inc | TVS Varistor 175 VAC 225 VDC IsoMOV 470 V Disc Radial Leaded 17 mm (Alt: ISOM5-175-B-L2) RoHS : Compliant | 0 | |||
| P295BL272M500L | KEMET Corporation | Safety Capacitor Metallized Paper Radial Box 2 Pin 2700 pF 20 Y1 Through Hole 500 VAC - Tape and Reel (Alt: P295BL272M500L) RoHS : Compliant | 0 | |||
| AB2065B-LW100-R | PUI Audio | Piezo Bender 65 kHz 0014 UF 500 ohm 079 Dia 002 H (Alt: AB2065B-LW100-R) RoHS : Compliant | 0 | |||
Avnet Asia | 10129382-924005BLF | Amphenol Corporation | FCI10129382-924005BLF BOARD TO BOARD CON (Alt: 10129382-924005BLF) RoHS : Compliant | 19,200 | ||
| DP1608-A2455BLT/LF | Advanced Ceramic X Corporation | (Alt: DP1608-A2455BLT/LF) RoHS : Compliant |
| 4,040 | ||
| IS43LR16160J-5BLI | Integrated Silicon Solution Inc | (Alt: IS43LR16160J-5BLI) RoHS : Compliant | 0 | |||
| IS62WV6416FBLL-45BLI | Integrated Silicon Solution Inc | SRAM Chip Asynchronous Single 3V 1Mbit 64K X 16 45ns 48-Pin VFBGA (Alt: IS62WV6416FBLL-45BLI) RoHS : Compliant | 0 | |||
| IS45S16400J-5BLA1 | Integrated Silicon Solution Inc | (Alt: IS45S16400J-5BLA1) RoHS : Compliant | 0 | |||
| T1200B-45BLI-TR | Integrated Silicon Solution Inc | SRAM 4MB (256K X 16) ASYNC SRAM (Alt: T1200B-45BLI-TR) RoHS : Compliant | 0 | |||
| IS45S16400J-5BLA1-TR | Integrated Silicon Solution Inc | (Alt: IS45S16400J-5BLA1-TR) RoHS : Compliant | 0 | |||
| TLP185(BLL-TPR,E(T | Toshiba America Electronic Components | (Alt: TLP185(BLL-TPR,E(T) RoHS : Compliant | 0 | |||
| MMBZ5225BLT1G | onsemi | (Alt: MMBZ5225BLT1G) RoHS : Compliant | 0 | |||
| MMBZ5245BLT1G | onsemi | (Alt: MMBZ5245BLT1G) RoHS : Compliant |
| 0 | ||
IS62WV5128BLL-55BLI | Integrated Silicon Solution Inc | SRAM Chip Async Single 3.3V 4M-Bit 512K x 8 55ns 36-Pin Mini-BGA (Alt: IS62WV5128BLL-55BLI) RoHS : Compliant | 0 | |||
| TLP185(BL-TPL,SE(T | Toshiba America Electronic Components | (Alt: TLP185(BL-TPL,SE(T) RoHS : Compliant | 0 | |||
| TLP185(BLL-TR,SE(T | Toshiba America Electronic Components | (Alt: TLP185(BLL-TR,SE(T) RoHS : Compliant | 0 | |||
| IS62WV12816BLL-55BLI | Integrated Silicon Solution Inc | SRAM Chip Async Single 3.3V 2M-Bit 128K x 16 55ns 48-Pin Mini-BGA (Alt: IS62WV12816BLL-55BLI) RoHS : Compliant | 0 | |||
| PI6C557-05BLE | Diodes Incorporated | Clock Generator, 200MHz, 3.135 V to 3.465 V, 4 Outputs, WTSSOP-20, -40 ?C to 85 ?C (Alt: PI6C557-05BLE) RoHS : Compliant |
| 0 | ||
 Avnet Silica | SZMMBZ5235BLT1G | onsemi | 225 mW 5 ZenerDiodeVoltage Regulator ONSSPCDDECI9E6E (Alt: SZMMBZ5235BLT1G) RoHS : Compliant | 6,000 | ||
| IS62WV10248BLL-55BLI-TR | Integrated Silicon Solution Inc | SRAM Chip Async Single 3V 8MBit 1M x 8 55ns 48Pin MiniBGA TR (Alt: IS62WV10248BLL-55BLI-TR) RoHS : Compliant | 5,000 | |||
| IS62WV102416EBLL-55BLI | Integrated Silicon Solution Inc | SRAM Chip Async Single 25V33V 16MBit 1M x 16 55ns 48Pin VFBGA (Alt: IS62WV102416EBLL-55BLI) RoHS : Compliant | 480 | |||
| APT6025BLLG | Microchip Technology Inc | (Alt: APT6025BLLG) RoHS : Compliant | 0 | |||
| PI6C557-05BLEX | Diodes Incorporated | PCIe Clock Generator 200 MHz 4 Outputs 3135 V to 3465 V 20 Pins TSSOP (Alt: PI6C557-05BLEX) RoHS : Compliant | 0 | |||
| IS43LR16128B-5BLI | Integrated Silicon Solution Inc | (Alt: IS43LR16128B-5BLI) RoHS : Compliant | 0 | |||
| IS45S16400J-5BLA1 | Integrated Silicon Solution Inc | DRAM Automotive 40 to 85C 200 54 ball BGA RoHS (Alt: IS45S16400J-5BLA1) RoHS : Compliant | 0 | |||
| IS43LD16640D-25BL | Integrated Silicon Solution Inc | (Alt: IS43LD16640D-25BL) RoHS : Compliant | 0 | |||
| IS62WV5128EBLL-45BLI | Integrated Silicon Solution Inc | (Alt: IS62WV5128EBLL-45BLI) RoHS : Compliant | 0 | |||
| IS46LQ32128A-125BLA2 | Integrated Silicon Solution Inc | 4Gb LPDDR4 SDRAM (Alt: IS46LQ32128A-125BLA2) RoHS : Compliant | 0 | |||
| IS66WVE4M16EBLL-55BLI | Integrated Silicon Solution Inc | PSRAM Async 64MBit 4M x 16 55ns 48Pin TFBGA (Alt: IS66WVE4M16EBLL-55BLI) RoHS : Compliant | 0 | |||
| IS62WV51216HALL-55BLI | Integrated Silicon Solution Inc | SRAM (Alt: IS62WV51216HALL-55BLI) RoHS : Compliant | 0 | |||
| IS62WV20488EBLL-55BLI | Integrated Silicon Solution Inc | SRAM Chip Async Single 25V33V 16MBit 2M x 8 55ns 48Pin TFBGA (Alt: IS62WV20488EBLL-55BLI) RoHS : Compliant | 0 | |||
| IS62WV6416BLL-55BLI-TR | Integrated Silicon Solution Inc | (Alt: IS62WV6416BLL-55BLI-TR) RoHS : Compliant | 0 | |||
| IS65WV12816BLL-55BLA3-TR | Integrated Silicon Solution Inc | SRAM Chip Async Single 33V 2MBit 128K x 16 55ns 48Pin MiniBGA TR (Alt: IS65WV12816BLL-55BLA3-TR) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | IC-SD85 BLCC SD1C | iC-Haus | IR LED, 850 nm, with lens, SMT compatible |
| 0 | |
| IC-SN85BLCCSN1C | iC-Haus | 850 nm IR LED |
| 0 | ||
 Component Electronics, Inc | MMBZ5245BLT1G | onsemi | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,940 | |
| AB2065B-LW15 | Projects Unlimited | IN STOCK SHIP TODAY |
| 901 | ||
| NYW060250125BL | YS Tech Usa Inc | IN STOCK SHIP TODAY |
| 300 | ||
| 05BL5M | Switchcraft Conxall | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 276 | ||
GRM42-6Y5V105Z025BL | Murata Manufacturing Co Ltd | IN STOCK SHIP TODAY RoHS : Compliant |
| 271 | ||
| MVK-2.5-BLUE | Klemsan Elektrik Elektronik Sanayi Ve Ticaret As | IN STOCK SHIP TODAY | 200 | |||
| PYK-2.5-BLACK | Klemsan Elektrik Elektronik Sanayi Ve Ticaret As | IN STOCK SHIP TODAY | 200 | |||
| 05BL3M | Switchcraft Conxall | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 70 | ||
| 5BLH | Wiremold | IN STOCK SHIP TODAY | 11 | |||
| S291-125-BLACK | Sifam Meters | IN STOCK SHIP TODAY | 3 | |||
| W151-125-BLACK | Sifam Meters | IN STOCK SHIP TODAY | 2 | |||
| PR175B1675BLK | L-com Inc | IN STOCK SHIP TODAY |
| 1 | ||
| H50X25-BLACK | HellermannTyton | IN STOCK SHIP TODAY |
| 1 | ||
| DTZK-15-BLK | MH Connectors | IN STOCK SHIP TODAY |
| 1 | ||
| S111-125-BLACK | Sifam Meters | IN STOCK SHIP TODAY | 1 | |||
 DB Roberts | DSI-4253-45-BL | Sugatsune Kogyo Co Ltd | SS SLIDING DOOR HANDLE 44.5MM | 0 | ||
| GS-GL5-BL-G1001 | Sugatsune Kogyo Co Ltd | GLASS DOOR CAM LOCK | 0 | |||
| HG-VH8-T35/BL | Sugatsune Kogyo Co Ltd | COMBINATION HINGE,BLACK PLASTIC(POM) | 0 | |||
| DC-200-25BL | Sugatsune Kogyo Co Ltd | 0 | ||||
| DSI-3250-35-BL | Sugatsune Kogyo Co Ltd | BLACK SS SLIDING DOOR HANDLE | 0 | |||
| UTA-105BL | Sugatsune Kogyo Co Ltd | RECESSED PULL WITH VENTILATOR, | 0 | |||
| MC-JM45BL | Sugatsune Kogyo Co Ltd | 0 | ||||
| DSI-4254-300-45-BL | Sugatsune Kogyo Co Ltd | SS HANDLE H300,W45,D85 | 0 | |||
| HK-CH35-BL | Sugatsune Kogyo Co Ltd | COUNTER HOOK BLACK | 0 | |||
| DSI-4254-100-35-BL | Sugatsune Kogyo Co Ltd | 0 | ||||
| DSI-4251-35-BL | Sugatsune Kogyo Co Ltd | SS SLIDING DOOR HANDLE, BLACK | 0 | |||
| DSI-4257-45-BL | Sugatsune Kogyo Co Ltd | SS HANDLE H200,W45,D50, BLACK | 0 | |||
| MC-25BL | Sugatsune Kogyo Co Ltd | MAGNETIC MINI TOUCH LATCH | 0 | |||
| DSI-4254-100-45-BL | Sugatsune Kogyo Co Ltd | BLACK SS SLIDING DOOR HANDLE | 0 | |||
| SN-95/BL | Sugatsune Kogyo Co Ltd | 0 | ||||
 EBV Elektronik | TLP185(BLL-TL,SE(T | Toshiba America Electronic Components | Optocoupler DCIN 1CH Transistor With Base DCOUT 4Pin SOIC TR (Alt: TLP185(BLL-TL,SE(T) RoHS : Compliant | 24,000 | ||
| MMBZ5245BLT1G | onsemi | Zener Single Diode 15 V 225 mW SOT23 3 Pins 150 C Surface Mount (Alt: MMBZ5245BLT1G) RoHS : Compliant | 21,000 | |||
| TLP785(BLL-TP6,F(C | Toshiba America Electronic Components | Optocoupler DCIN 1CH DCOUT 4Pin PDIP SMD TR (Alt: TLP785(BLL-TP6,F(C) RoHS : Compliant | 8,000 | |||
| TLP185(BLL-TR,SE(T | Toshiba America Electronic Components | Optocoupler DCIN 1CH DCOUT 4Pin SO TR (Alt: TLP185(BLL-TR,SE(T) RoHS : Compliant | 3,000 | |||
| TLP785(BLL,F(C | Toshiba America Electronic Components | Optocoupler DCIN 1CH Transistor DCOUT 4Pin DIP (Alt: TLP785(BLL,F(C) RoHS : Compliant | 1,200 | |||
| APT6025BLLG | Microchip Technology Inc | (Alt: APT6025BLLG) RoHS : Compliant | 0 | |||
| MMBZ5225BLT1G | onsemi | Zener Single Diode 3 V 225 mW SOT23 3 Pins 150 C Surface Mount (Alt: MMBZ5225BLT1G) RoHS : Compliant | 0 | |||
| TLP785(BL,F(C | Toshiba America Electronic Components | Optocoupler DCIN 1CH Transistor DCOUT 4Pin DIP (Alt: TLP785(BL,F(C) RoHS : Compliant | 0 | |||
| ACPF-W055-BLK | Broadcom Limited | (Alt: ACPF-W055-BLK) RoHS : Compliant | 0 | |||
| ACPF-W065-BLK | Broadcom Limited | (Alt: ACPF-W065-BLK) RoHS : Compliant | 0 | |||
| SZMMBZ5235BLT3G | onsemi | 225 mW 5 ZenerDiodeVoltage Regulator ONSSPCDDECI9E6E (Alt: SZMMBZ5235BLT3G) RoHS : Compliant | 0 | |||
| SZMMBZ5245BLT1G | onsemi | Zener Single Diode 15 V 225 mW SOT23 3 Pins 150 C Surface Mount (Alt: SZMMBZ5245BLT1G) RoHS : Compliant | 0 | |||
| SZMMBZ5245BLT3G | onsemi | 225 mW 5 ZenerDiodeVoltage Regulator ONSSPCDDECI9E6E (Alt: SZMMBZ5245BLT3G) RoHS : Compliant | 0 | |||
| TLP185(BL-TPL,SE(T | Toshiba America Electronic Components | (Alt: TLP185(BL-TPL,SE(T) RoHS : Compliant | 0 | |||
| TLP185(BL-TPR,SE(T | Toshiba America Electronic Components | Optocoupler 1CH Open Collector 3750Vrms 4Pin SOIC Emboss TR (Alt: TLP185(BL-TPR,SE(T) RoHS : Compliant | 0 | |||
 FDH Electronics | M16878/5-BLE-09 | Whitmore/Wirenetics | Wire and Cable | 7,335 | ||
| A-A-52080-B-5-BLACK-FT | Breyden Products | Cable Rt & Sec | 5,950 | |||
| CAT 5 BLUE | Silver State Wire & Cable | Wire and Cable | 2,000 | |||
| M16878/5-BLE-54 | Whitmore/Wirenetics | Wire and Cable | 1,962 | |||
| M16878/5-BLE-1 | Harbour Industries | Hook-Up Wire |
| 1,437 | ||
| M16878/5-BLE-3 | Super-Temp Wire & Cable | Wire and Cable |
| 610 | ||
| 1.5-BLACK-INCH | SUMITOMO ELECTRIC Industries Ltd | Harness Mgmt | 432 | |||
| M16878/5-BLE-2 | Harbour Industries | Hook-Up Wire |
| 171 | ||
| MPC45D45-BLK | L-com Inc | Heat Shrink Prd RoHS : Compliant |
| 100 | ||
| M16878/5-BLE-2 | Wire | Wire and Cable | 99 | |||
| M43435-1A-5-BLK | Western Filament Inc | Harness Mgmt | 23 | |||
| S-15645BLU | ULINE | Supplies - ESG | 12 | |||
| S-14835BLU | FDH Electronics | Wire and Cable | 7 | |||
| HAR SAF4175BL | FDH Electronics | Wire Placehldr | 1 | |||
| M16878/5-BLE-2 | Amphenol Cable & Interconnect Technologies | Wire and Cable | 0 | |||
 Flip Electronics | SZMMBZ5225BLT1G | onsemi | Stock, Ship Today RoHS : Compliant | 27,000 | ||
| MMBZ5235BLT1G | onsemi | Stock, Ship Today RoHS : Compliant | 27,000 | |||
| MMBZ5245BLT1G | onsemi | Stock, Ship Today RoHS : Compliant | 24,000 | |||
| SZMMBZ5235BLT3G | onsemi | Stock, Ship Today RoHS : Compliant | 9,600 | |||
| SZMMBZ5235BLT1G | onsemi | Stock, Ship Today RoHS : Compliant | 2,372 | |||
| MMBZ5225BLT1G | onsemi | Stock, Ship Today RoHS : Compliant | 700 | |||
 Maritex | PI6C557-05BLEX | Diodes Incorporated | Clock Generators & Oscillators; PI6C557-05BLEX; DIODES; 6.5 mm; 4.4 mm; 120 mA RoHS : Compliant |
| 5,083 | |
| TACTRUD62H45BL250 | Innocent Electronics Co Ltd | Tact Switch; SMD; dimensions 6.2x6; h=4.5mm; vertical; operating force 250gf; button: round |
| 2,939 | ||
| MMBZ5235BLT1G | onsemi | Zener Diodes; MMBZ5235BLT1G; ON SEMICONDUCTOR; 3; 225 mW; 6.8 V; 3 �A RoHS : Compliant |
| 1,677 | ||
| MMBZ5245BLT1G | onsemi | Zener Diodes; MMBZ5245BLT1G; ON SEMICONDUCTOR; 3; 225 mW; 15 V; 5 % RoHS : Compliant |
| 849 | ||
| KON-TFD1525BL | CONNTHERM | Bullet terminal; blue; female; crimped for cable 0.5-1.5mm2; B=6.1mm; D=4.2mm; F=14mm; L=24.4 |
| 316 | ||
| TBO5002SFB25BL-CT | CONNTHERM | PCB terminal block; pitch 5.00mm; 2-ways; vertical; wire range 2.50mm2; brass cage;with screws for a flat screwdriver; blue color; 250V/16A |
| 100 | ||
| TB5002SFS15BL-CT | CONNTHERM | PCB terminal block; pitch 5.00mm; 2-ways; vertical; wire range 1.5mm2; with screws for a flat screwdriver; brass cage; blue color; UL 250V/16A |
| 100 | ||
| TACTD72H85BL180-CT | CONNTHERM | Tact Switch; SMD; dimensions 7.0x7.2; h=8.5mm; vertical; operating force 180gf; button: round |
| 100 | ||
| TB5003SFS25BL-CT | CONNTHERM | PCB terminal block; pitch 5.00mm; 2-ways; vertical; wire range 2.5mm2; with screws for a flat screwdriver; brass cage; blue color; UL 250V/16A |
| 100 | ||
| LM385BLPR-1-2 | Texas Instruments | Voltage References; LM385BLPR-1-2; TEXAS INSTRUMENTS; 3; TO-92; 20 mA; Fixed, Shunt RoHS : Compliant |
| 97 | ||
| M3225B-LN | BEISIT | Cabe gland M32; nylon; M32x1.5 18-25mm; flat O-ring; with lock nut; black; for wrench 42 |
| 56 | ||
| P2925B + LN | BEISIT | Professional cable gland GLAND-P2925B; cable gland PG29; 18-25 mm; flat O-ring; nylon; with nut; black |
| 51 | ||
| P0705B-LN | BEISIT | Cable gland PG7; nylon; PG7 2-5.0mm; black; with lock nut; for wrench 15 |
| 50 | ||
| M1205B-LN | BEISIT | Cabel gland M12; nylon; M12x1.5 2-5.0mm; flat O-ring; with lock nut; black; for wrench 15 |
| 50 | ||
| SZMMBZ5245BLT1G | onsemi | Zener Diodes; SZMMBZ5245BLT1G; ON SEMICONDUCTOR; 3; 15 V; 100 nA; Single RoHS : Compliant |
| 1 | ||
 Master Electronics | DK-1511-015/BL | ASSMANN WSW components GmbH | Cable Assembly Cat 5e UTP 4.572m 24AWG RJ-45 to RJ-45 8 to 8 POS PL-PL Crimp-Crimp Bag RoHS : Compliant |
| 130 | |
| AT16/M16/SF45/BLY | Thomas & Betts | Adaptalok ATS - 45 Degree Conduit Fitting - Swivel Internal Female Thread - Nominal Conduit Size 16mm - M16 Thread - Polyamide (Nylon) 66 - Nickel Plated Brass Thread/TPE - Black with Yellow Elastomer. RoHS : Compliant |
| 0 | ||
| AT42/M40/S45/BLY | Thomas & Betts | Adaptalok ATS - 45 Deg Conduit Fitting - Swivel Male Thread - Conduit 42mm - M40 Thread - Nickel Plated Brass Thread/TPE - Black/Yellow Elastomer. RoHS : Compliant |
| 0 | ||
| EQDP02805.51STLSTL5BLN | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HLCD-10-18.15-BL-TH-4 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HLCD-30-02.25-BL-BD-4 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 800-5A5-BL | Carling Technologies | Single pole multi-position rotary switch with 5 detent positions and black actuator for general purpose control applications. RoHS : Compliant |
| 0 | ||
| SP75/BL/10M | Thomas & Betts | Adaptaflex® - Type SP Liquid-Resistant Flexible Metallic Conduit - Material Galvanized Steel Core W/PVC Jacket - Color Black - Conduit Size NC75 - Out Dia 79.0mm - In Dia 70.0mm - Static Bend Radius 150mm - Reel Length 10m RoHS : Compliant |
| 0 | ||
| SV250K5BL1 | Bourns Inc | Varistor Medium Voltage 250V 100pF 5A 320VDC 5mm Through Hole Bulk RoHS : Compliant |
| 0 | ||
| CV275K5BL1 | Bourns Inc | Disc Varistor - 430V - 400A Max - 275VAC/350VDC Max - -40°C to +85°C - 5mm Dia - Through Hole - Straight Leads - Bulk RoHS : Compliant |
| 0 | ||
| CV75K5BL1 | Bourns Inc | Disc Varistor - 120V - 400A Max - 75VAC/100VDC Max - -40°C to +85°C - 5mm Dia - Through Hole - Straight Leads - Bulk RoHS : Compliant |
| 0 | ||
| AL21/M20/S45/BL | Thomas & Betts | 45 Degree Conduit Fitting - Swivel External Male Thread - Nominal Conduit Size 21mm - M20 Thread - Polyamide (Nylon) 66 - Nickel Plated Brass Thread - Black. RoHS : Compliant |
| 0 | ||
| AL28/PG21/S45/BL | Thomas & Betts | 45 Degree Conduit Fitting - Swivel External Male Thread - Nominal Conduit Size 28mm - PG21 Thread - Polyamide (Nylon) 66 - Nickel Plated Brass Thread - Black. RoHS : Compliant |
| 0 | ||
| APT30M75BLLG | Microchip Technology Inc | Trans MOSFET N-CH 300V 44A 3-Pin(3+Tab) TO-247 Tube RoHS : Compliant |
| 0 | ||
| SP25/BL/10M | Thomas & Betts | Adaptaflex® - Type SP Liquid-Resistant Flexible Metallic Conduit - Material Galvanized Steel Core W/PVC Jacket - Color Black - Conduit Size NC25 - Out Dia 26.0mm - In Dia 21.4mm - Static Bend Radius 55mm - Reel Length 10m RoHS : Compliant |
| 0 | ||
 Neutron USA | N201-005-BL | Tripp Lite | Tripp Lite Cat6 Gigabit Snagless Molded Patch Cable RoHS : Compliant |
| 256 | |
| C6ASPAT5BL | StarTech | 5FT CAT6A BLUE ETHERNET STP CABLE |
| 112 | ||
| N201-015-BL | Tripp Lite | Tripp Lite Cat6 Gigabit Snagless Molded Patch Cable |
| 66 | ||
| M45PATCH25BL | StarTech | StarTech.com 25 ft Blue Molded Cat5e UTP Patch Cable |
| 50 | ||
| CAT6APCS-025-BL | Black Box Corporation | 25FT BL CAT6A 500-MHZ STRANDED ETHERNET CABLE F/UTP PVC SNAGLESS |
| 50 | ||
| CAT6PC-025-BL | Black Box Corporation | 25FT CAT6 BLUE MOLDED STRNDED BOOT PATCH CABL250MHZ RoHS : Compliant |
| 50 | ||
| S45PATCH15BL | StarTech | StarTech.com 15 ft Cat5e Blue Snagless Shielded RJ45 F/UTP Cat 5e Patch Cable - 15ft Patch Cord |
| 50 | ||
| CAT6APC-025-BL | Black Box Corporation | 25FT BL CAT6A 500-MHZ STRANDED ETHERNET CABLE UTP PVC SNAGLESS |
| 16 | ||
| N204-S15-BL-LA | Eaton Corporation | 15FT CAT6 BLUE ENET CABLE LEFT ANGLED UTP SLIM MOLDED M/M RoHS : Compliant |
| 5 | ||
| DCC.30.35B.LAG | LEMO connectors | Extraction, Removal & Insertion Tools RoHS : Compliant |
| 3 | ||
| N6PATCH5BL | StarTech | StarTech.com 5 ft Blue Snagless Cat6 UTP Patch Cable - ETL Verified |
| 2 | ||
| DX80N2Q45BL-RG | Banner Engineering Corp | Banner Engineering DX80N2Q45BL-RG Sensor, Wireless, Q45, Button/Light, 2.4GHz, 65mW, Red/Green LED, 29044 |
| 1 | ||
| 63210-510-000 CF-275 BLACK KIT | PacTec | Enclosures, Boxes, & Cases KIT 8.36X9.11X3.15 |
| 0 | ||
| HLG-80H-15BL | Mean Well | AC/DC LED Power Supply 75W Single 7-Pin , Cannot use w/AC Wall Dimmer RoHS : Compliant |
| 0 | ||
| CPDL2.5/BL | Altech Corporation | DIN Rail Terminal Blocks DIN Term Blk Push-In Dbl Level |
| 0 | ||
 Pasternack Enterprises US | PE3C8815/BL | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-BL, RF Cable Type: Belden 1694A-BL, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable Using 75 Ohm 1694A-BL Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-BL coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8815/BL, can also be known as a 6G SDI BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to 1.0/2.3 plug cable assembly PE3C8815/BL is built with Belden 1694A-BL which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8815/BL can also be used in the other direction and will be 1.0/2.3 male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-BL coax. | 490 | ||
| PE3C8815/BL-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-BL, RF Cable Type: Belden 1694A-BL, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1694A-BL Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-BL coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8815/BL-12, can also be known as a 6G SDI BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to 1.0/2.3 plug cable assembly PE3C8815/BL-12 is built with Belden 1694A-BL which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8815/BL-12 can also be used in the other direction and will be 1.0/2.3 male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-BL coax. |
| 209 | ||
| PE3C8815/BL-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-BL, RF Cable Type: Belden 1694A-BL, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 36 Inch Length Using 75 Ohm 1694A-BL Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-BL coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8815/BL-36, can also be known as a 6G SDI BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to 1.0/2.3 plug cable assembly PE3C8815/BL-36 is built with Belden 1694A-BL which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8815/BL-36 can also be used in the other direction and will be 1.0/2.3 male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-BL coax. |
| 147 | ||
| PE3C8875/BL-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-BL, RF Cable Type: Belden 1855A-BL, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1855A-BL Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-BL coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8875/BL-12, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8875/BL-12 is built with Belden 1855A-BL which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-BL coax. |
| 51 | ||
| PE3C8875/BL-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-BL, RF Cable Type: Belden 1855A-BL, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1855A-BL Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-BL coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8875/BL-300, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8875/BL-300 is built with Belden 1855A-BL which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-BL coax. |
| 51 | ||
| PE3C8875/BL-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-BL, RF Cable Type: Belden 1855A-BL, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1855A-BL Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-BL coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8875/BL-120, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8875/BL-120 is built with Belden 1855A-BL which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-BL coax. |
| 51 | ||
| PE3C8815/BL-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-BL, RF Cable Type: Belden 1694A-BL, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1694A-BL Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-BL coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8815/BL-120, can also be known as a 6G SDI BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to 1.0/2.3 plug cable assembly PE3C8815/BL-120 is built with Belden 1694A-BL which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8815/BL-120 can also be used in the other direction and will be 1.0/2.3 male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-BL coax. |
| 44 | ||
| PE3C8745/BL-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-BL, RF Cable Type: Belden 4694R-BL, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 300 Inch Length Using 75 Ohm 4694R-BL Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 300 inch length using 75 Ohm 4694R-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 300 inch length using 75 Ohm 4694R-BL coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8745/BL-300, can also be known as a 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8745/BL-300 is built with belden 4694R-BL which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8745/BL-300 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 300 inch length using 75 Ohm 4694R-BL coax. |
| 0 | ||
| PE3C8745/BL-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-BL, RF Cable Type: Belden 4694R-BL, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 36 Inch Length Using 75 Ohm 4694R-BL Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 36 inch length using 75 Ohm 4694R-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 36 inch length using 75 Ohm 4694R-BL coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8745/BL-36, can also be known as a 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8745/BL-36 is built with belden 4694R-BL which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8745/BL-36 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 36 inch length using 75 Ohm 4694R-BL coax. |
| 0 | ||
| PE3C8745/BL-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-BL, RF Cable Type: Belden 4694R-BL, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 120 Inch Length Using 75 Ohm 4694R-BL Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4694R-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4694R-BL coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8745/BL-120, can also be known as a 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8745/BL-120 is built with belden 4694R-BL which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8745/BL-120 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4694R-BL coax. |
| 0 | ||
| PE3W05155/BL/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. 2.92mm Female Bulkhead to N Male Cable Using PE-P086HF Coax with HeatShrink., Pasternack’s PE3W05155/BL/HS 2.92mm female bulkhead to type N male RF cable assembly using PE-P086HF coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm female to type N male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm bulkhead cable connection on one end and a type N cable connection on the other. Our 2.92mm to type N cable assembly has a female gender on end 1 and a male on end 2. PE3W05155/BL/HS can also be known as a 2.92mm jack to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.52 inches, allowing for a single bend without damaging the cable. Our PE3W05155/BL/HS RF cable has an FEP jacket of 0.104-inch diameter. The flexible RF cable has a between series connection. This PE3W05155/BL/HS 2.92mm jack to type N plug cable assembly is built with PE-P086HF, which is a flexible coax type. The Pasternack flexible 2.92mm cable assembly is manufactured with 2.92mm to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W05155/BL/HS can also be used in the other direction and will be a type N male to 2.92mm female bulkhead cable assembly if the opposite connectivity is required. This 2.92mm jack bulkhead to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to type N cable assembly for quick shipment worldwide. Variations of 2.92mm and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to type N RF cable assembly as per your requirements. | 0 | |||
| PE3C8745/BL | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-BL, RF Cable Type: Belden 4694R-BL, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable Using 75 Ohm 4694R-BL Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable using 75 Ohm 4694R-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable using 75 Ohm 4694R-BL coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8745/BL, can also be known as a 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8745/BL is built with belden 4694R-BL which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8745/BL can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable using 75 Ohm 4694R-BL coax. | 0 | |||
| PE3W05035/BL/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Mini SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-P047HF, RF Cable Type: PE-P047HF, RF Cable Impedance: 50 Ohm. Mini SMP Female Right Angle to Mini SMP Female Right Angle Cable Using PE-P047HF Coax with HeatShrink, LF Solder., Pasternack’s PE3W05035/BL/HS right angle mini SMP female to right angle mini SMP female RF cable assembly using PE-P047HF coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to mini SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle mini SMP cable connection on one end and a right angle mini SMP cable connection on the other. Our mini SMP to mini SMP cable assembly has a female gender on end 1 and a female on end 2. PE3W05035/BL/HS can also be known as a right angle mini SMP jack to right angle mini SMP jack cable assembly and will be shipped the same day as it is purchased. This high flex RF cable assembly has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W05035/BL/HS RF cable has an FEP jacket of 0.060-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 165 degrees C. The high flex RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our right angle mini SMP female to right angle mini SMP female cable has a maximum VSWR of 1.4:1. This PE3W05035/BL/HS mini SMP jack to mini SMP jack cable assembly is built with PE-P047HF, which is a high flex coax type. The Pasternack high flex mini SMP cable assembly is manufactured with right angle mini SMP to right angle mini SMP cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder attachment method and a beryllium copper body with gold over nickel plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. This mini SMP right angle jack to mini SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to mini SMP cable assembly for quick shipment worldwide. Variations of mini SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to mini SMP RF cable assembly as per your requirements. | 0 | |||
| PE3W21385/BL/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047HF, RF Cable Type: PE-P047HF, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Cable Using PE-P047HF Coax with HeatShrink, LF Solder., Pasternack’s PE3W21385/BL/HS SMA male to SMA male RF cable assembly using PE-P047HF coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with an SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W21385/BL/HS can also be known as a SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This high flex RF cable assembly has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W21385/BL/HS RF cable has an FEP jacket of 0.060-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 100 degrees C. The high flex RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. This PE3W21385/BL/HS SMA plug to SMA plug cable assembly is built with PE-P047HF, which is a high flex coax type. The Pasternack high flex SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with gold plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. This SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements. | 0 | |||
| PE3C8745/BL-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-BL, RF Cable Type: Belden 4694R-BL, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 72 Inch Length Using 75 Ohm 4694R-BL Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 72 inch length using 75 Ohm 4694R-BL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 72 inch length using 75 Ohm 4694R-BL coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8745/BL-72, can also be known as a 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8745/BL-72 is built with belden 4694R-BL which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8745/BL-72 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 72 inch length using 75 Ohm 4694R-BL coax. |
| 0 | ||
 Venkel Ltd. | PWCR0805-BL-1R0JT | VENKEL LTD | Pulse Withstanding CR;0805;2/5W;�200PPM;1R;�5% RoHS : Compliant | 0 | ||
| PWCR0805-BL-1R15FT | VENKEL LTD | Pulse Withstanding CR;0805;2/5W;�200PPM;1.15R;�1% RoHS : Compliant | 0 | |||
| PWCR0805-BL-1R60FT | VENKEL LTD | Pulse Withstanding CR;0805;2/5W;�200PPM;1.6R;�1% RoHS : Compliant | 0 | |||
| PWCR0805-BL-2100DT | VENKEL LTD | Pulse Withstanding CR;0805;2/5W;�200PPM;210R;�0.5% RoHS : Compliant | 0 | |||
| PWCR0805-BL-2R32FT | VENKEL LTD | Pulse Withstanding CR;0805;2/5W;�200PPM;2.32R;�1% RoHS : Compliant | 0 | |||
| PWCR0805-BL-36R0DT | VENKEL LTD | Pulse Withstanding CR;0805;2/5W;�200PPM;36R;�0.5% RoHS : Compliant | 0 | |||
| PWCR0805-BL-43R0FT | VENKEL LTD | Pulse Withstanding CR;0805;2/5W;�200PPM;43R;�1% RoHS : Compliant | 0 | |||
| PWCR0805-BL-5R6JT | VENKEL LTD | Pulse Withstanding CR;0805;2/5W;�200PPM;5.6R;�5% RoHS : Compliant | 0 | |||
| PWCR0805-BL-9R53FT | VENKEL LTD | Pulse Withstanding CR;0805;2/5W;�200PPM;9.53R;�1% RoHS : Compliant | 0 | |||
| SWCR0805-BL-200MT | VENKEL LTD | Surge Withstanding CR;0805;2/5W;�200PPM;20R;�20% RoHS : Compliant | 0 | |||
| SWCR0805-BL-221JT | VENKEL LTD | Surge Withstanding CR;0805;2/5W;�200PPM;220R;�5% RoHS : Compliant | 0 | |||
| SWCR0805-BL-680KT | VENKEL LTD | Surge Withstanding CR;0805;2/5W;�200PPM;68R;�10% RoHS : Compliant | 0 | |||
| SWCR0805-BL-6R2MT | VENKEL LTD | Surge Withstanding CR;0805;2/5W;�200PPM;6.2R;�20% RoHS : Compliant | 0 | |||
| PWCR0805-BL-11R3FT | VENKEL LTD | Pulse Withstanding CR;0805;2/5W;�200PPM;11.3R;�1% RoHS : Compliant | 0 | |||
| PWCR0805-BL-120JT | VENKEL LTD | Pulse Withstanding CR;0805;2/5W;�200PPM;12R;�5% RoHS : Compliant | 0 | |||
 Vyrian | V300C12T75BL | Vicor Power | DC-DC Regulated Power Supply Module, 1 Output, 75W, Hybrid RoHS : Not Compliant | 14,934 | ||
MT46V128M4FN-5BL:F | Micron Technology Inc | DDR1 DRAM, 128MX4, 0.7ns, CMOS, PBGA60 RoHS : Not Compliant | 7,119 | |||
MT46V64M8P-5BL:J | Micron Technology Inc | DDR1 DRAM, 64MX8, 0.7ns, CMOS, PDSO66 | 7,071 | |||
| MT46V32M8CV-5BLIT:K | Micron Technology Inc | DDR1 DRAM, 32MX8, 0.7ns, CMOS, PBGA60 RoHS : Not Compliant | 6,622 | |||
| MT46V128M4BN-5BL:C | Micron Technology Inc | DDR1 DRAM, 128MX4, 0.7ns, CMOS, PBGA60 RoHS : Compliant | 5,529 | |||
| MT46V32M8FG-5BLIT:F | Micron Technology Inc | DDR1 DRAM, 32MX8, 0.7ns, CMOS, PBGA60 | 5,304 | |||
| MT46V16M16FG-5BLIT:C | Micron Technology Inc | DDR1 DRAM, 16MX16, 0.7ns, CMOS, PBGA60 RoHS : Not Compliant | 5,239 | |||
| MT46V32M8P-5BLAT:G | Micron Technology Inc | DDR1 DRAM, 32MX8, 0.7ns, CMOS, PDSO66 RoHS : Compliant | 5,047 | |||
| MT46V32M8TG-5BLAT:G | Micron Technology Inc | DDR1 DRAM, 32MX8, 0.7ns, CMOS, PDSO66 RoHS : Not Compliant | 4,346 | |||
| MT46V64M8P-5BLAAT:J | Micron Technology Inc | DDR1 DRAM, 64MX8, CMOS, PDSO66 | 3,816 | |||
| MT46V16M16P-5BL:C | Micron Technology Inc | DDR1 DRAM, 16MX16, 0.7ns, CMOS, PDSO66 RoHS : Compliant | 3,744 | |||
| MT46V32M4P-5BL | Micron Technology Inc | DDR1 DRAM, 32MX4, 0.7ns, CMOS, PDSO66 RoHS : Compliant | 3,427 | |||
| MT46V16M16FG-5BL | Micron Technology Inc | DDR1 DRAM, 16MX16, 0.7ns, CMOS, PBGA60 RoHS : Not Compliant | 2,612 | |||
| MT46V32M8FG-5BLIT:G | Micron Technology Inc | DDR1 DRAM, 32MX8, 0.7ns, CMOS, PBGA60 RoHS : Not Compliant | 2,520 | |||
| TFAC5-BLK | Infinite Electronics International | Wire And Cable | 692 | |||
 Waytek, Inc. | 14/1 UL1015 BLUE | Unified Wire and Cable Inc | 14GA Blue MTW/AWM Bare Copper 600V, 1000V UL 1015/1230/1032 CSA TEW |
| 22,750 | |
| 16/1 UL1015 BLUE | Unified Wire and Cable Inc | 16GA Blue MTW/AWM Wire Bare Copper 600V, 1000V UL 1015/1230/1032 CSA TEW |
| 21,750 | ||
| 10/1 UL1015 BLUE | Unified Wire and Cable Inc | 10GA Blue MTW/AWM Wire Bare Copper 600V,1000V UL 1015/1230/1032 CSA TEW |
| 17,000 | ||
| 20/1 UL1015 BLUE | Unified Wire and Cable Inc | 20GA Blue MTW/AWM Wire Tinned Copper 600V, 1000V DISC WAY |
| 11,750 | ||
| 18/1 UL1015 BLUE | Unified Wire and Cable Inc | 18GA Blue MTW/AWM Wire Bare Copper 600V, 1000V UL 1015/1230/1032 CSA TEW |
| 6,250 | ||
| 12/1 UL1015 BLUE | Unified Wire and Cable Inc | 12GA Blue MTW/AWM Wire Bare Copper 600V, 1000V UL 1015/1230/1032 CSA TEW |
| 6,000 | ||
| 12/1 UL1015 BLACK | Unified Wire and Cable Inc | 12GA Black MTW/AWM Wire Bare Copper 600V, 1000V UL 1015/1230/1032 CSA TEW |
| 5,750 | ||
| HST155BL-48-BULK | NSPA | NSPA HST155BL-48 HST150 Series flexible thin-wall heat shrink tubing is blue polyolefin tubing built for insulating and protecting wires, terminals, and splices. Its flexible thin-wall construction supports clean shrink coverage, abrasion protection, and dependable harness insulation. |
| 15 | ||
| 18/1 UL1015 BLACK | Unified Wire and Cable Inc | 18GA Black MTW/AWM Wire Bare Copper 600V, 1000V UL 1015/1230/1032 CSA TEW |
| 0 | ||
 Win Source Electronics | TLP785(BLL | Toshiba America Electronic Components |
| 241,000 | ||
| SZMMBZ5245BLT1G | onsemi | DIODE ZENER 15V 225MW SOT23-3 / Zener Diode 15 V 225 mW ±5% Surface Mount SOT-23-3 (TO-236) RoHS : Compliant |
| 120,000 | ||
| MMBZ5245BLT1G | onsemi | DIODE ZENER 15V 225MW SOT23-3 RoHS : Compliant |
| 82,700 | ||
| MMBZ5235BL | onsemi | Zener Voltage Regulators RoHS : Not Compliant |
| 69,000 | ||
| TLP185(BL-TPL | Toshiba America Electronic Components |
| 36,000 | |||
| PI6C557-05BLE | Diodes Incorporated | IC CLOCK GENERATOR 20-TSSOP RoHS : Compliant |
| 30,000 | ||
| IS62WV12816BLL-55BLI | Integrated Silicon Solution Inc | 128K x 16 LOW VOLTAGE ULTRA LOW POWER CMOS STATIC RAM | IC SRAM 2M PARALLEL 48MINIBGA RoHS : Compliant |
| 28,003 | ||
| PI6C557-05BLEX | Diodes Incorporated | IC CLOCK GENERATOR TSSOP RoHS : Compliant |
| 27,560 | ||
| IS62WV5128BLL-55BLI | Integrated Silicon Solution Inc | 512K x 8 LOW VOLTAGE, ULTRA LOW POWER CMOS STATIC RAM | IC SRAM 4M PARALLEL 36MINIBGA RoHS : Compliant |
| 10,800 | ||
| FT245BL | FTDI Chip | IC USB FS PARALLEL FIFO 32LQFP RoHS : Compliant |
| 6,000 | ||
| IS42SM16160K-75BLI | Integrated Silicon Solution Inc | IC DRAM 256MBIT PAR 54TFBGA RoHS : Compliant |
| 5,426 | ||
| MMBZ5225BLT1G | onsemi | DIODE ZENER 3V 225MW SOT23-3 RoHS : Compliant |
| 5,073 | ||
| IS42SM16160K-75BLI-TR | Integrated Silicon Solution Inc | IC SDRAM 256MBIT 133MHZ 54BGA |
| 4,930 | ||
| IS62WV25616BLL-55BLI | Integrated Silicon Solution Inc | 256K x 16 LOW VOLTAGE, ULTRA LOW POWER CMOS STATIC SRAM | IC SRAM 4M PARALLEL 48MINIBGA RoHS : Compliant |
| 811 | ||
| HSMS-2815-BLKG | Broadcom Limited | RF DIODE SCHOTTKY 20V SOT143-4 RoHS : Compliant |
| 455 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼ 
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand