Electronic Components Datasheet Search
  English  ▼
ALLDATASHEET.NET

X  



601XG-AF5-R Distributor

DistributorPart #ManufacturerDescriptionPriceQty.
BuyNow

Pasternack Enterprises US
PE34160-18

Pasternack Enterprises Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm, Length: 18 inches. SMA Male Right Angle to SMA Female Bulkhead Cable 18 Inch Length Using 75 Ohm RG59 Coax., Radio frequency assembly SMA male right angle to SMA female bulkhead cable 18 inch length using 75 Ohm RG59 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to SMA female bulkhead cable 18 inch length using 75 Ohm RG59 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and SMA bulkhead cable connection on the other. Our right angle SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE34160-18, can also be known as a right angle SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE34160-18 is built with RG59 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA right angle male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34160-18 can also be used in the other direction and will be SMA female bulkhead to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA female bulkhead cable 18 inch length using 75 Ohm RG59 coax.
1 : $105.99
25 : $100.69
50 : $95.39
100 : $91.15
225
PE3FCA260-10M

Pasternack Enterprises Key Specifications, Mode: Multimode, Multimode Class: OM1, Fiber Diameter: 62.5/125, Cable Assembly Color: Orange, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: ST, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 6-Fiber LC UPC to ST UPC, OM1 Multimode Distribution Cable, 5.0mm Riser, 2.0mm breakout, Orange-10M. Pasternack’s PE3FCA260-10M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long 6-fiber cable assembly is equipped with LC/UPC to ST/UPC connectors. Our orange fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM1 fiber that provides 100 Mb Ethernet support and 10 Gb Ethernet up to 33 meters with a 62.5/125µm core size and an LED light source. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 6-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA260-10M fiber optic cable with a 5 mm cable diameter and 50 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/UPC to ST/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Our fiber optic breakout assembly is engineered for low attenuation and high durability, and the tight buffered fiber with aramid yarn reinforcement ensures exceptional performance in demanding network environments. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM1 multimode fiber optic cable that meets your requirements.
1 : $175.99
5 : $168.95
10 : $161.91
25 : $154.87
47
PE7601-2

Pasternack Enterprises Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 3 GHz, Nominal Attenuation: 2 dB, VSWR, Max: 1.15:1, Input Power, Max (CW): 2 Watts, Body Material: Stainless Steel, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 2dB RF fixed attenuator 2W, DC to 3GHz, SMA male to female, Stainless Steel. The PE7601-2 is a fixed 2 dB attenuator from Pasternack. This 2 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. The max input power rating (CW) of this RF attenuator is 2 Watts. This passive attenuator has a maximum VSWR of 1.15:1 and operates between -55 and 125 deg C. Our radio frequency attenuator with SMA connectors is constructed with stainless steel body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This SMA attenuator has a male gender on side 1 and a SMA female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 2 dB. The Pasternack PE7601-2 attenuator is rated for up to 3 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The attenuator has a stainless steel SMA connector with gold-plated brass contact. Our fixed RF attenuator PE7601-2 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 2 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.
1 : $34.29
25 : $32.92
50 : $31.89
100 : $31.2
3
PE7601-5

Pasternack Enterprises Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 3 GHz, Nominal Attenuation: 5 dB, VSWR, Max: 1.15:1, Input Power, Max (CW): 2 Watts, Body Material: Stainless Steel, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 5dB RF fixed attenuator 2W, DC to 3GHz, SMA male to female, Stainless Steel. The PE7601-5 is a fixed 5 dB attenuator from Pasternack. This 5 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. The max input power rating (CW) of this RF attenuator is 2 Watts. This passive attenuator has a maximum VSWR of 1.15:1 and operates between -55 and 125 deg C. Our radio frequency attenuator with SMA connectors is constructed with stainless steel body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This SMA attenuator has a male gender on side 1 and a SMA female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 5 dB. The Pasternack PE7601-5 attenuator is rated for up to 3 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The attenuator has a stainless steel SMA connector with gold-plated brass contact. Our fixed RF attenuator PE7601-5 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 5 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.
1 : $34.29
25 : $32.92
50 : $31.89
100 : $31.2
2
PE3FCA560-15M

Pasternack Enterprises Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 50 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: APC, Connector 2 Series: ST, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNP, Cable Diameter: 4.5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. 4-Fiber LC APC to ST UPC, OS2 Single Mode Indoor Distribution Cable, 4.5mm Plenum, 2.0mm breakout, Yellow-15M. Pasternack’s PE3FCA560-15M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 15-meter long 4-fiber cable assembly is equipped with LC/APC to ST/UPC connectors. Our yellow fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly has a single mode OS2 fiber that offers ultra-low attenuation over distances up to 10km for 10G Ethernet and beyond with a 9/125µm core size. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA560-15M fiber optic cable with a 4.5 mm cable diameter and 34 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/APC to ST/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. This OS2 fiber optic assembly is designed for enterprise backbones, long-haul networking, and high-speed data transmission and delivers exceptional reliability for critical infrastructure deployments. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements.
1 : $156.99
5 : $150.71
10 : $144.43
25 : $138.15
0
PE3W06015LF

Pasternack Enterprises Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50 Ohm. 7/16 DIN Female Bulkhead to 7/16 DIN Female Bulkhead Cable Using LMR-600 Coax, LF Solder. PE3W06015LF is a 7/16 DIN female bulkhead to 7/16 DIN female bulkhead cable using LMR-600 coax. This Pasternack 7/16 DIN female bulkhead to 7/16 DIN female bulkhead cable assembly uses a 50 Ohm 7/16 DIN for connector 1 and a 50 Ohm 7/16 DIN for connector 2. Our female 7/16 DIN bulkhead to female 7/16 DIN bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W06015LF 7/16 DIN female bulkhead to 7/16 DIN female bulkhead cable assembly is constructed with LMR-600 coax, * LMR™ is a trademark of Times Microwave Systems.
0
PE7601-3

Pasternack Enterprises Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 3 GHz, Nominal Attenuation: 3 dB, VSWR, Max: 1.15:1, Input Power, Max (CW): 2 Watts, Body Material: Stainless Steel, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 3dB RF fixed attenuator 2W, DC to 3GHz, SMA male to female, Stainless Steel. The PE7601-3 is a fixed 3 dB attenuator from Pasternack. This 3 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. The max input power rating (CW) of this RF attenuator is 2 Watts. This passive attenuator has a maximum VSWR of 1.15:1 and operates between -55 and 125 deg C. Our radio frequency attenuator with SMA connectors is constructed with stainless steel body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This SMA attenuator has a male gender on side 1 and a SMA female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 3 dB. The Pasternack PE7601-3 attenuator is rated for up to 3 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The attenuator has a stainless steel SMA connector with gold-plated brass contact. Our fixed RF attenuator PE7601-3 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 3 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.
1 : $34.29
25 : $32.92
50 : $31.89
100 : $31.2
0
PE3W16017

Pasternack Enterprises Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Cable Using LMR-100 Coax. PE3W16017 is a SMA male to SMA male cable using LMR-100A coax. This Pasternack SMA male to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16017 SMA male to SMA male cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.
0
PE3W26012/HS

Pasternack Enterprises Key Specifications, Connector Series 1: D-Sub, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: D-Sub, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-LW195, RF Cable Type: LMR-LW195, RF Cable Impedance: 50 Ohm. D-Sub Plug to D-Sub Plug Cable Using LMR-LW195 Coax with HeatShrink. PE3W26012/HS is a D-Sub plug to D-Sub plug cable using LMR-LW195 coax. This Pasternack D-Sub plug to D-Sub plug cable assembly uses a 50 Ohm D-Sub for connector 1 and a 50 Ohm D-Sub for connector 2. Our plug D-Sub to plug D-Sub cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W26012/HS D-Sub plug to D-Sub plug cable assembly is constructed with LMR-LW195 coax, * LMR™ is a trademark of Times Microwave Systems.
0
PE36013/WH

Pasternack Enterprises Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75, Connector Series 2: Mini SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 75, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75. 75 Ohm N Male to 75 Ohm Mini SMB Plug Right Angle Cable Using 75 Ohm RG59 Coax. PE36013/WH is a N type male to Mini SMB plug right angle cable using RG59 coax. This Pasternack type N male to Mini SMB plug right angle cable assembly uses a 75 Ohm type N for connector 1 and a 75 Ohm Mini SMB for connector 2. type N to Mini SMB right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N type to plug Mini SMB right angle cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE36013/WH type N male to Mini SMB plug right angle cable assembly is constructed with RG59 coax.
0
PE3W26010

Pasternack Enterprises Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG401/U, RF Cable Type: RG401, RF Cable Impedance: 50 Ohm. BNC Female to N Male Cable Using RG401 Coax. PE3W26010 is a BNC female to N male cable using RG401 coax. This Pasternack BNC female to N male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm N for connector 2. Our female BNC to male N cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W26010 BNC female to N male cable assembly is constructed with RG401 coax.
0
PE3C7601

Pasternack Enterprises
0
PE3W01601

Pasternack Enterprises Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Mini UHF, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. N Male to Push-On Mini UHF Male Cable Using RG142 Coax. PE3W01601 is a N male to Mini UHF male cable using RG142 coax. This Pasternack N male to Mini UHF male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm Mini UHF for connector 2. Our male N to male Mini UHF cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01601 N male to Mini UHF male cable assembly is constructed with RG142 coax.
0
PE80T6015

Pasternack Enterprises Key Specifications, Type: Tunnel Diode, Detector Polarity: Positive, Connector In Series: SMA, Connector In Gender: Male, Connector Out Series: SMA, Connector Out Gender: Female, Minimum Frequency: 2 GHz, Maximum Frequency: 4 GHz, Connector In Impedance: 50 Ohm. Tunnel Diode Detector, SMA, 5 nsec Pulse Risetime, Positive Video Out, +17 dBm max Pin, 2 GHz to 4 GHz. Pasternack tunnel diode detector PE80T6015 is part of our extensive in-stock RF, microwave and millimeter wave components available for purchase. This tunnel diode detector is manufactured with SMA male to SMA female connectors. Our SMA tunnel diode detector has a minimum frequency of 2 GHz and a maximum frequency of 4 GHz. This SMA coaxial RF detector has a maximum input power of 17 dBm and a video capacitance of 0 pF. PE80T6015 coaxial SMA detector is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. Our tunnel diode detector can be bought and shipped worldwide the same-day as with Pasternack's other in-stock RF parts.
1 : $432.99
10 : $415.67
25 : $398.35
0
PE3601LF

Pasternack Enterprises Key Specifications, Connector Series 1: SMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: SMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: RG196A/U, RF Cable Type: RG196, RF Cable Impedance: 50. SMC Plug to SMC Plug Right Angle Cable Using RG196 Coax, RoHS. PE3601LF is a SMC plug to SMC plug right angle cable using RG196 coax. This Pasternack SMC plug to SMC plug right angle cable assembly uses a 50 Ohm SMC for connector 1 and a 50 Ohm SMC for connector 2. SMC to SMC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug SMC to plug SMC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3601LF SMC plug to SMC plug right angle cable assembly is constructed with RG196 coax.
0

Teledyne HiRel
5962-8765601SA

Teledyne HiRel FLIP-FLOP, D-TYPE, 8-BIT, WITH CLEAR, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant
0
5962-8775601RA

Teledyne HiRel FLIP-FLOP, D-TYPE, 8-BIT, WITH CLEAR
RoHS : Not Compliant
0
5962-8972601MMA

Teledyne HiRel MICROCONTROLLER, I/O EXPANDED
RoHS : Not Compliant
0
5962-9160601MKA

Teledyne HiRel FLIP-FLOP, D-TYPE, 10-BIT, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant
0
5962-9217601M2A

Teledyne HiRel BUFFER/DRIVER, OCTAL, NONINVERTING, WITH 3-STATE OUTPUTS
RoHS : Not Compliant
0
5962-9091601BRA

Teledyne HiRel MAGNITUDE COMPARATOR, 8-BIT, WITH ENABLE AND PULL-UP RESISTORS
RoHS : Not Compliant
0
5962-8976601RA

Teledyne HiRel BUFFER/DRIVER, OCTAL, NONINVERTING, W/3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant
0
5962-87626012A

Teledyne HiRel FLIP-FLOP, D-TYPE, HEX, WITH MASTER RESET
RoHS : Not Compliant
0
5962-88656013A

Teledyne HiRel REGISTER, 9-BIT NONINVERTING
RoHS : Not Compliant
0
5962-8875601MFA

Teledyne HiRel DECODER/DEMULTIPLEXER, 8-INPUT, TTL-COMPATIBLE
RoHS : Not Compliant
0
5962-9091601MSA

Teledyne HiRel MAGNITUDE COMPARATOR, 8-BIT, WITH ENABLE AND PULL-UP RESISTORS
RoHS : Not Compliant
0
5962-88726013A

Teledyne HiRel PROG. LOGIC DEVICE, UV ERASABLE, 22-INPUT 10-OUTPUT AND-OR, 40 NS ACCESS TIME
RoHS : Not Compliant
0
5962-9091601MRA

Teledyne HiRel MAGNITUDE COMPARATOR, 8-BIT, WITH ENABLE AND PULL-UP RESISTORS
RoHS : Not Compliant
0
M38510/75601BRA

Teledyne HiRel FLIP-FLOP, D-TYPE, 8-BIT, WITH CLEAR
RoHS : Not Compliant
0
7704601DA

Teledyne HiRel NAND GATE, QUAD 2-INPUT, WITH SCHMITT TRIGGERS
RoHS : Not Compliant
0

Venkel Ltd.
C1210X5R160-107MNE

VENKEL LTD Chip Capacitor;1210;X5R;16V;100uF;�20%
RoHS : Compliant
1,000
C01005HQN160-1R0CNP

VENKEL LTD High-Q NP0 Capacitor;01005;HQN;16V;1pF;�0.25pF
RoHS : Compliant
0
C0402X7R160-103KPE

VENKEL LTD Chip Capacitor;0402;X7R;16V;0.01uF;�10%;Pd
RoHS : Compliant
0
C0603X7R160-104JNR

VENKEL LTD Chip Capacitor;0603;X7R;16V;0.1uF;�5%
RoHS : Compliant
0
C0603X7R160-104KPBE

VENKEL LTD Chip Capacitor;0603;X7R;16V;0.1uF;�10%;Pb
RoHS : Compliant
0
C0603X7R160-105KNP

VENKEL LTD Chip Capacitor;0603;X7R;16V;1uF;�10%
RoHS : Compliant
0
C0805C0G601-152KNE

VENKEL LTD HV Chip Capacitor;0805;C0G;600V;1500pF;�10%
RoHS : Compliant
0
C0805C0G601-1R0CNP

VENKEL LTD HV Chip Capacitor;0805;C0G;600V;1pF;�0.25pF
RoHS : Compliant
0
C0805C0G601-5R6CNP

VENKEL LTD HV Chip Capacitor;0805;C0G;600V;5.6pF;�0.25pF
RoHS : Compliant
0
C0805C0G601-8R2DNP

VENKEL LTD HV Chip Capacitor;0805;C0G;600V;8.2pF;�0.5pF
RoHS : Compliant
0
C1812X7R601-152KNE

VENKEL LTD HV Chip Capacitor;1812;X7R;600V;1500pF;�10%
RoHS : Compliant
0
C1206C0G601-820JNP

VENKEL LTD HV Chip Capacitor;1206;C0G;600V;82pF;�5%
RoHS : Compliant
0
C1210X7R601-103KNE

VENKEL LTD HV Chip Capacitor;1210;X7R;600V;0.01uF;�10%
RoHS : Compliant
0
C1210X7R601-392KNE

VENKEL LTD HV Chip Capacitor;1210;X7R;600V;3900pF;�10%
RoHS : Compliant
0
C1210X7R601-473KNE

VENKEL LTD HV Chip Capacitor;1210;X7R;600V;0.047uF;�10%
RoHS : Compliant
0

Vyrian
7601601FX

Texas Instruments Multiplexer, LS Series, 1-Func, 8 Line Input, 1 Line Output, Complementary Output, Bipolar, CDFP16
8,689
7601601EA

Texas Instruments Multiplexer, LS Series, 1-Func, 8 Line Input, 1 Line Output, Complementary Output, TTL, CDIP16
RoHS : Not Compliant
8,075
7601601FA

Texas Instruments Multiplexer, LS Series, 1-Func, 8 Line Input, 1 Line Output, Complementary Output, TTL, CDFP16
RoHS : Not Compliant
7,382
7601601EX

Texas Instruments Multiplexer, LS Series, 1-Func, 8 Line Input, 1 Line Output, Complementary Output, Bipolar, CDIP16
4,016
XCVP1702-1LLIVSVA5601

AMD Xilinx Microprocessor Circuit, CMOS, PBGA5601
RoHS : Compliant
3,669
XCVP1702-1MLIVSVA5601

AMD Xilinx Microprocessor Circuit, CMOS, PBGA5601
RoHS : Compliant
3,011
XCVP1702-2LLEVSVA5601

AMD Xilinx Microprocessor Circuit, CMOS, PBGA5601
RoHS : Compliant
2,613
XCVP1702-1LSIVSVA5601

AMD Xilinx Microprocessor Circuit, CMOS, PBGA5601
RoHS : Compliant
2,509
XCVP1702-2MLIVSVA5601

AMD Xilinx Microprocessor Circuit, CMOS, PBGA5601
RoHS : Compliant
2,273
XCVP1702-1MSIVSVA5601

AMD Xilinx Microprocessor Circuit, CMOS, PBGA5601
RoHS : Compliant
2,248
XCVP1702-2LSEVSVA5601

AMD Xilinx Microprocessor Circuit, CMOS, PBGA5601
RoHS : Compliant
2,200
XCVP1702-1MSEVSVA5601

AMD Xilinx Microprocessor Circuit, CMOS, PBGA5601
RoHS : Compliant
2,123
XCVP1702-2MLEVSVA5601

AMD Xilinx Microprocessor Circuit, CMOS, PBGA5601
RoHS : Compliant
1,612
XCVP1702-1LSEVSVA5601

AMD Xilinx Microprocessor Circuit, CMOS, PBGA5601
RoHS : Compliant
1,416
M81714/60-16-01

Amphenol Corporation Rectangular Connector
695

Waytek, Inc.
AT60-16-0122

Amphenol Sine Systems AT/AHD-9 Male Reel Pin Contact 18-16GA Size 16 S&F 4000/Reel 1060-16-0122
4,000 : $0.128
20,000 : $0.1145
76,000
AT62-16-0144

Amphenol Sine Systems AT Series Stamped & Formed, Gold-Plated,Female Contact, Size 16,16-18GA, 4K on Reel
4,000 : $0.3314
20,000 : $0.3061
48,000
AT60-14-0122

Amphenol Sine Systems AT/AHD-9 Male Reel Pin Contact 16-14GA Size 16 S&F 4,000 Pieces 1060-14-0122
4,000 : $0.1583
20,000 : $0.148
40,000
AT60-16-0122

Amphenol Sine Systems AT/AHD-9 Male Loose Pin Contact 18-16GA SIZE 16 S&F 1060-16-0122 Nickel
50 : $0.2728
200 : $0.2315
500 : $0.2174
1,000 : $0.2054
19,946
19056-0106

Molex 16-14 GA #8 Ring Terminal Non-Insulated Brazed
100 : $0.3032
200 : $0.2826
500 : $0.2632
1,000 : $0.2425
5,000 : $0.2304
19,698
AT60-16-0144

Amphenol Sine Systems AT Series Gold-Plated,Male Stamped & Formed,Contact (Waytek Disco'd) (4K on Reel)
4,000 : $0.1817
20,000 : $0.1754
16,000
AT60-16-0144

Amphenol Sine Systems Amphenol Sine Systems AT60-16-0144 A Series male pin terminal is a size 16, gold-plated copper alloy contact for 18-16 gauge wire. Designed as a Deutsch 1060-16-0144 and DT Series drop-in replacement, it supports sealed AT connector assemblies.
10 : $0.2711
50 : $0.2635
100 : $0.2523
200 : $0.2468
500 : $0.2393
1,000 : $0.2337
12,994
33481-0601

Molex The Molex 33481-0601 is an MX150 1.5 mm sealed male connector housing (plug) designed for reliable wire-to-wire connections in automotive and harsh environments. It features a 6-circuit (6-pin), single-row configuration with keying option A, ensuring proper mating and preventing misconnection. Constructed from durable thermoplastic, it provides environmental sealing when used with MX150 terminals and seals, protecting against moisture, dirt, and vibration. With a 3.5 mm pitch, ~22A rating, and -40C to +150C operating range, it supports both power and signal circuits in demanding applications.
RoHS : Compliant
1 : $2.8397
10 : $2.6305
50 : $2.4527
100 : $2.2017
200 : $2.0867
500 : $2.0135
616
T250L0X2 111-24601

HellermannTyton HellermannTyton T250L0X2 heavy-duty cable tie is a 35" long high-strength tie built for securing large wire bundles, hoses, and tubing. Its one-piece self-locking design supports fast installation and dependable hold in demanding electrical, industrial, and harness-routing applications.
25 : $3.1002
50 : $2.5917
100 : $2.4306
200 : $2.2941
500 : $2.1825
225
0326010.HXP

Littelfuse Inc 10 Amp Fuses Ceramic MDA (Waytek Disco'd)
RoHS : Compliant
10 : $1.6708
20 : $1.5177
50 : $1.3924
100 : $1.323
200 : $1.2811
500 : $1.2394
98
5601-24B

Egis Mobile Electric PT Series 30A Time Delay Relay 24V Bulk
1 : $100.76
5 : $94.67
10 : $88.57
25 : $81.07
50 : $78.26
22
V4D2A601-00000-000

Carling Technologies V-Series Rocker Switch Body, SPDT, ON-NONE-ON, 20A, 12VDC Illumination-Incandescent
1 : $16.2821
10 : $14.4883
20 : $14.3503
50 : $13.3155
100 : $12.9015
200 : $12.5565
16
6601B

Egis Mobile Electric Mini Automatic Charging Relay, 125A
1 : $111.435
5 : $99.636
10 : $93.081
50 : $85.215
100 : $81.282
200 : $76.038
5
6011

Blue Sea Systems Battery Switch 32V 300A M Series Dual Circuit Plus Disc Way No Repl
1 : $52.2
10 : $52.2
1
AT04-4PBM04-X601

Amphenol Sine Systems 24 POS Power Splitter Control Module,4 Pin x 6 Device Layout Nickel Contact, 13A, Grn LED
1 : $25.3631
5 : $24.4115
10 : $23.6198
50 : $22.3516
100 : $21.5584
200 : $20.925
0

Wuhan P&S
TEMD6010FX01

Vishay Intertechnologies Ambient Light Sensor
RoHS : Compliant
1 : $1.1425
100 : $0.4118
500 : $0.2968
1,000 : $0.2746
99,000
VS-E5PH6012L-N3

Vishay Intertechnologies Hyperfast Rectifier, 60A,1200V
RoHS : Compliant
1 : $7.72
100 : $2.58
500 : $2.38
1,000 : $2.32
89,000
ILHB1206ER601V

Vishay Intertechnologies High Current Multilayer Ferrite Beads
RoHS : Compliant
1 : $0.39
100 : $0.13
500 : $0.12
1,000 : $0.12
66,000
VS-HFA15TB60-1-M3

Vishay Intertechnologies Ultrafast Soft Recovery Diode, 600V, 15A
RoHS : Compliant
1 : $1.76
100 : $0.64
500 : $0.46
1,000 : $0.43
1,000
PR02000205601JA100

Vishay Intertechnologies PR02 5% A1 5K6
RoHS : Compliant
1 : $0.53
100 : $0.18
500 : $0.17
1,000 : $0.16
1,000
STBR6012W

STMicroelectronics -
RoHS : Compliant
1 : $15.4
100 : $5.14
500 : $4.75
1,000 : $4.62
20

Link URL



Does ALLDATASHEET help your business so far?  [ DONATE ]  

About Alldatasheet   |   Advertisement   |   Contact us   |   Privacy Policy   |   Link to Datasheet    |   Link Exchange   |   Manufacturer List
All Rights Reserved짤Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com