| Electronic Components Datasheet Search |
|
6095DBG-S08-R Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() TME | 5907559536095 | Eltrim Kable Sp zoo | Wire; H05V-U; 0.5mm2; wire; Cu; PVC; yellow-green; 300V,500V; 100m |
| 300 | |
| 796095-5 | TE Connectivity | Connector: circular; industrial RoHS : Compliant |
| 200 | ||
| 16 0959 000 | Binder UK Ltd | Gasket; 713,715,763,766,813,814,815,825,866,876 |
| 185 | ||
| 249-8609-508 | ITT Interconnect Solutions | Connector: circular; Automotive |
| 96 | ||
| 249-8609-586 | ITT Interconnect Solutions | Connector: D-Sub; data transfer |
| 80 | ||
| 186095 | Festo | Push-in fitting; threaded,straight; -0.95÷6bar; Thread: G 1/8" RoHS : Compliant |
| 10 | ||
| A3200-6095A | Honeywell Sensing and Control | A3200-6095A |
| 2 | ||
| 1300060957 | Molex | PIN: 4; PVC; 10m |
| 1 | ||
| 6160950 | Gedore Torque Ltd | Socket: 6-angles; socket spanner,impact; 18mm; 1/2"; steel |
| 0 | ||
| 082-6095-RFX | Amphenol RF | Connector: N; socket; female; coaxial; straight; 50Ω; soldering |
| 0 | ||
| 2-2176609-5 | TE Connectivity | Resistor: wire-wound; 10Ω; THT; 1W; ±5%; Ø2.5x6.8mm; axial; L: 6.8mm RoHS : Unknown |
| 0 | ||
| 7000-44711-7960950 | Murrelektronik GmbH | Cable: for sensors; PIN: 4; M12 male straight,RJ45 plug; 9.5m |
| 0 | ||
| 00806095 | GSR | Threaded insert; stainless steel; M24; L: 36mm; Pitch: 1.5 |
| 0 | ||
| 03446095 | GSR | Drill bit; for metal; Ø: 9.5mm; L: 125mm; Working part len: 81mm |
| 0 | ||
| 1860950 | Phoenix Contact | Connector: pluggable terminal block; plug; power supply; 12A RoHS : Compliant |
| 0 | ||
![]() Avnet Americas | 796095-2 | TE Connectivity | Conn CPC PIN 4 POS Crimp ST Panel Mount 4 Terminal 1 Port - Bulk (Alt: 796095-2) RoHS : Compliant |
| 2,060 | |
| 1-1761609-5 | TE Connectivity | - Rail/Tube (Alt: 1-1761609-5) RoHS : Compliant |
| 100 | ||
| 1-2047609-5 | TE Connectivity | - Bulk (Alt: 1-2047609-5) RoHS : Compliant | 0 | |||
| 7609-501LF | CTS Corporation | - Trays (Alt: 7609-501LF) RoHS : Compliant |
| 0 | ||
| 88E6095-A0-TAH-C000 | Marvell Technology Group Ltd | Ethernet Switch Stackable Fully Managed 8 x 10BASE-T/100BASE-TX + 3 x Gigabit Ports - Trays (Alt: 88E6095-A0-TAH-C000) RoHS : Not Compliant | 0 | |||
| 936095-2 | TE Connectivity | 090III 20P PLUG ASSY BLACK - Bag (Alt: 936095-2) RoHS : Not Compliant |
| 0 | ||
| 609551F00000G | Boyd Corporation | EXTR,60955-8FT(96.5") - Bulk (Alt: 003451) RoHS : Compliant | 0 | |||
| PCIEC-036-0950-EC-EC-C | Samtec Inc | PCI Express Jumper Cable Assemblies - Bulk (Alt: PCIEC-036-0950-EC-EC-C) RoHS : Compliant | 0 | |||
| 7-2836095-7 | TE Connectivity | Crimp Tool Kit for Ocean 2.0 Side Feed Applicator - Bag (Alt: 7-2836095-7) RoHS : Not Compliant |
| 0 | ||
| APB0609560M035R | Kyocera AVX Components | - Tape and Reel (Alt: APB0609560M035R) RoHS : Compliant |
| 0 | ||
| 15466-0950 | Molex | Ribbon Cable, 50 Conductors, 0.5mm, 229mm L, 500mA, 60V, Premo-Flex 15466 Series, Same Side - Bulk (Alt: 0154660950) RoHS : Compliant |
| 0 | ||
| CCF60953KFKR36 | Vishay Intertechnologies | CCF-60 953K 1% T-1 R36 - Tape and Reel (Alt: CCF60953KFKR36) RoHS : Not Compliant |
| 0 | ||
| 609-5031HD | TE Connectivity | - Bulk (Alt: 8-1437021-1) RoHS : Compliant |
| 0 | ||
| CMF6095K300FHR8 | Vishay Intertechnologies | - Tape and Reel (Alt: CMF6095K300FHR8) RoHS : Not Compliant |
| 0 | ||
| EB706-09-500 | Amphenol Corporation | B43643A9337M50 - Bulk (Alt: EB706-09-500) RoHS : Compliant |
| 0 | ||
![]() Newark | 885012006095 | Wurth Elektronik | Cap, Mlcc, 22Pf, 2%, C0G/Np0, 0603; |Würth Elektronik 885012006095 RoHS : Compliant |
| 19,970 | |
| APB0609560M035R | Kyocera AVX Components | Cap Pol Alu Elec, 56Uf, 35V, Radial; |Kyocera Avx APB0609560M035R RoHS : Compliant |
| 8,000 | ||
| APB0609560M035R | Kyocera AVX Components | Cap Pol Alu Elec, 56Uf, 35V, Radial; |Kyocera Avx APB0609560M035R RoHS : Compliant |
| 8,000 | ||
| APB0609560M035R | Kyocera AVX Components | Cap, Alu Polymer, 56Uf, 35V, Smd; |Kyocera Avx APB0609560M035R RoHS : Compliant |
| 7,795 | ||
| APB0609560M035R | Kyocera AVX Components | Cap, Alu Polymer, 56Uf, 35V, Smd; |Kyocera Avx APB0609560M035R RoHS : Compliant |
| 7,795 | ||
| 885012206095R | Wurth Elektronik | Cap, 0.1Uf, 50V, Mlcc, 0603; |Würth Elektronik 885012206095R RoHS : Compliant |
| 4,767 | ||
| SWT0316-095035GSA. | Global Connector Technology | Tactile Sw, Spst-No, 0.05A/12V, 350Gf; |Gct SWT0316-095035GSA. RoHS : Compliant |
| 1,960 | ||
| SWT0316-095035GSA. | Global Connector Technology | Tactile Sw, Spst-No, 0.05A/12V, 350Gf; |Gct SWT0316-095035GSA. RoHS : Compliant |
| 1,960 | ||
| 430156095736 | Wurth Elektronik | Switch, Tactile, 0.05A, 12Vdc, Tht; |Würth Elektronik 430156095736 RoHS : Compliant |
| 475 | ||
| 560112116095 | Wurth Elektronik | Res, 1K62, 1%, 0.1W, Thick Film, 0603; |Würth Elektronik 560112116095 RoHS : Compliant |
| 250 | ||
| MP60953N | SPC Multicomp | Xlr Connector, R/A Plug, 3Pos, Cable; |Multicomp Pro MP60953N RoHS : Compliant |
| 68 | ||
| 2060-952/028-000 | WAGO Innovative Connections | Board-To-Board Link, 2 Pole, Smd Tb; For Use With:2 Pole Smd Terminal Blocks; Accessory Type:Board-To-Board Link; Product Range:- Rohs Compliant: Yes |Wago 2060-952/028-000 (Alternate Part Number: 4055143303859 RoHS : Compliant |
| 68 | ||
| 430186095716 | Wurth Elektronik | Switch, Tactile, 0.05A, 12Vdc, Tht; |Würth Elektronik 430186095716 RoHS : Compliant |
| 58 | ||
| MP60957N | SPC Multicomp | Xlr Connector, R/A Rcpt, 7Pos, Cable; |Multicomp Pro MP60957N RoHS : Compliant |
| 9 | ||
| MP60954N | SPC Multicomp | Xlr Connector, R/A Plug, 4Pos, Cable; |Multicomp Pro MP60954N RoHS : Compliant |
| 7 | ||
![]() RS | 6095 | Keystone Electronics Corp | BANANA JACK NON-INSULATED RECESSED HEAD SOLDER LUG .406 LENGTH BRASS/NICKEL RoHS : Compliant |
| 369 | |
| 35-BLUE-3/4X66FT (7000006095) | 3M | TAPE, COLOR CODING, ELECTRICAL, VINYL, BLUE, 66 FT., 0.75 IN. |
| 55 | ||
| 4609544 | RS Pro | AUTOMATIC CENTER PUNCH 125MM OVERALL LEN 14MM SHANK DIAM MACHINE STEEL |
| 24 | ||
| 27L6095 | capcom | CAPACITOR, POLYPRO METALLIZED, CAP 2 UF, TOL 6%, 660 AC, QC, GP, OVAL |
| 21 | ||
| 1760954 | RS Pro | BSPT ELBOW MALE CONNECTOR 8/6-1/8 |
| 20 | ||
| 8609529 | RS Pro | PANEL MOUNT 3 POLE NON FUSED ISOLATOR 20A 11KW IP65 RED HANDLE ABS UL 508 |
| 20 | ||
| 1760956 | RS Pro | BSPT ELBOW MALE CONNECTOR 8/6-1/4 |
| 20 | ||
| 1760953 | RS Pro | BSPT ELBOW MALE CONNECTOR 6/4-1/4 |
| 15 | ||
| 4276095 | WIKA Instrument LP | 111.10SP 4 300PSI 1/4 L AIR/WATER |
| 10 | ||
| BI1-EH04-AP6X-0.9-RS4T (46095871) | TURCK Inc | PROXIMITY SENSOR, 1MM RANGE, 3-WIRE 10-30VDC, SMOOTH BARREL, PNP-NO, 2M CABLE |
| 4 | ||
| BI1-EH04-AP6X-0.25-PSW3M-P7X2 (4609571) | TURCK Inc | INDUCTIVE PROXIMITY SENSOR, SHIELDED, SENSING DISTANCE 1MM |
| 3 | ||
| 4609550 | RS Pro | AUTOMATIC CENTER PUNCH 130MM OVERALL LEN 17MM SHANK DIAM MACHINE STEEL |
| 2 | ||
| 8609545 | RS Pro | NON-FUSIBLE DISCONNECT SWITCH, 3 POLE 125 A 75 KW IP65, PANEL MOUNT |
| 1 | ||
| 6095 | Adafruit Industries | SKULL LED FILAMENT |
| 0 | ||
| 6095 | 80/20 Inc | 1/4" HEX BALL END POWER BIT |
| 0 | ||
![]() Microchip Technology Inc | 1N6095 | Microchip Technology Inc | Power Schottky _ DO-4, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | |
![]() Rochester Electronics | BUK9609-55A,118![]() | NXP Semiconductors | MOSFET N-Channel 55V 75A (Ta) TO-263-3 T/R RoHS : Compliant |
| 1,600 | |
![]() Sager | 6095 | Keystone Electronics Corp | Test Plugs & Test Jacks TIP JACK RoHS : Compliant |
| 0 | |
| MPCC-2-24-2-L-60-95.00-S | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant | 0 | |||
| 0982660955 | Molex | FFC / FPC Jumper Cables PremoFlex 05 Jmpr 178Lgt Type A 25 Ckt | 0 | |||
| 1-2047609-5 | TE Connectivity | Crimpers / Crimping Tools CRIMPER INSULATION OVERLAP | 0 | |||
| 9860716095 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 936095-2 | TE Connectivity | 090III 20P PLUG ASSY BLACK RoHS : Compliant |
| 0 | ||
| 9852106095 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 7707106095 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 609-50AB | Wakefield-Vette | Heat Sinks Heat Sink/Clip Assembly for 40/45mm BGA/PowerPC Packages, 73.5x50.8x12.7mm RoHS : Compliant | 0 | |||
| 04-1006-0951 | TE Connectivity | PT5MA-100-N34-DN-420E-MC4 |
| 0 | ||
| 1860950 | Phoenix Contact | Pluggable Terminal Blocks FKCOW2,5/20-STF-5,08 RoHS : Compliant |
| 0 | ||
| 609551F00000G | BOYD Laconia | Heat Sinks Extrusion, Flatback, Class C, 2.682mm W, 0.4mm L, 5.87 Degree C/W, 8 Foot Bar | 0 | |||
| 060-9538-15 | HONEYWELL TEST AND MEASUREMENT | AP162DR,1I,2U,5D,6A:MODEL AS19G, 5,000 P |
| 0 | ||
| 9895806095 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 7-2836095-7 | TE Connectivity | Crimpers / Crimping Tools OCEAN_2.0_SPARE_PART_KIT-110F169O |
| 0 | ||
![]() Coilcraft Direct | PFL1609-561 | Coilcraft Inc | Power inductor, shielded, 20% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 5,578 | |
| PFL1609-561ME | Coilcraft Inc | Power inductor, shielded, 20% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 5,578 | ||
| PFL1609-561MEW | Coilcraft Inc | Power inductor, shielded, 20% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 5,578 | ||
![]() ComSIT USA | A5E41660958 | Pulse Egston | AVAILABLE EU | 174 | ||
![]() ComSIT USA | 5446095 | Phoenix Contact | HEADER Strip Terminal Block RoHS : Compliant | 7,300 | ||
![]() Interstate Connecting Components | 6095 | Keystone Electronics Corp | BANANA JACK RoHS : Compliant |
| 374 | |
| 6095-0-00-21-00-00-38-0 | Mill-Max Mfg Corp | 6095-0-00-21-00-00-38-0 NAIL HD PIN RoHS : Compliant |
| 232 | ||
| 936095-2 | TE Connectivity | 090III 20P PLUG ASSY BLACK RoHS : Compliant | 0 | |||
| 04-1006-0951 | TE Connectivity | PT5MA-100-N34-DN-420E-MC4 | 0 | |||
| 660-024Z109T6-095 | Glenair Inc | RECEPTACLE COVER FOR 38999 SERIES 3 | 0 | |||
| 249-8609-506 | ITT Interconnect Solutions | 2498609506 | 0 | |||
| 249-8609-551 | ITT Interconnect Solutions | 2498609551 | 0 | |||
| 006-0958-12 | TE Connectivity | 006-0958-12 | 0 | |||
| 7-2836095-7 | TE Connectivity | OCEAN_2.0_SPARE_PART_KIT-110F1 |
| 0 | ||
| CN6095-000 | TE Connectivity | EN-DCPT-6/2-45-SP RoHS : Compliant | 0 | |||
| 9-1633609-5 | TE Connectivity | CRIMPER, WIRE F RoHS : Compliant |
| 0 | ||
| 116095-000 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYC55A6842-22-9/96-9CS227 RoHS : Compliant | 0 | |||
| 006-0953-24 | TE Connectivity | 006-0953-24 | 0 | |||
| 10-497616-095 | Amphenol Aerospace | 0 | ||||
| 006-0954-22 | TE Connectivity | 006-0954-22 | 0 | |||
![]() PEI Genesis | 361-8836-09-552 | Dialight |
| 5 | ||
| 11836095-1 | SOURIAU-SUNBANK |
| 0 | |||
| 356095 | Amphenol Alden Products Company |
| 0 | |||
| 260957 | SOURIAU-SUNBANK |
| 0 | |||
SF2912-60955![]() | Amphenol SV Microwave | RoHS : Compliant |
| 0 | ||
| 366-8836-09-553 | Dialight |
| 0 | |||
| 137-8836-09-552 | Dialight |
| 0 | |||
| RSL116095-S | Amphenol PCD |
| 0 | |||
| 181-8836-09-553 | Dialight |
| 0 | |||
| 21-033856-095 | Amphenol Corporation |
| 0 | |||
| 11836095-2 | SOURIAU-SUNBANK |
| 0 | |||
| 10-497556-095 | Amphenol Corporation |
| 0 | |||
| 1116-6095 | Amphenol SV Microwave |
| 0 | |||
| SF2911-60958 | Amphenol SV Microwave | RoHS : Compliant |
| 0 | ||
| 082-6095-RFX | Amphenol RF |
| 0 | |||
![]() Powell Electronics | 626095-1 | TE Connectivity | TE COMPONENT (REF 626095-1) RoHS : Compliant |
| 73,920 | |
| 626095-2 | TE Connectivity | Contacts RoHS : Compliant |
| 15,840 | ||
| 1969609-5 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 5,940 | ||
| 776095-1 | TE Connectivity | Connectors |
| 2,404 | ||
| 1761609-5 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 462 | ||
| 216095-000 | TE Connectivity | CABLE-PROT PART (TE REF 216095-000) RoHS : Compliant |
| 357 | ||
| ZW-10-14-G-S-846-095 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 143 | ||
| 796095-5 | TE Connectivity | Connectors RoHS : Compliant |
| 132 | ||
| 082-6095-RFX | Amphenol RF | N-Type Straight Jack 50 Ohm 4-Hole Flan |
| 120 | ||
| TW-25-08-G-D-616-095 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 112 | ||
| 1-1633609-5 | TE Connectivity | CRIMPER, WIRE F .055 RoHS : Compliant |
| 5 | ||
| 2-1633609-5 | TE Connectivity | CRIMPER, WIRE F (.082 ) RoHS : Compliant |
| 4 | ||
| 5336095-002 | Glenair Inc | CONNECTOR ACCESSORIES |
| 4 | ||
| 361-8836-09-552 | Dialight | IN BASE T2 MF 15/32 SOD |
| 3 | ||
| A3200-6095A | Honeywell Sensing and Control | Switch |
| 1 | ||
![]() Chip 1 Exchange | 16095-0001 | Molex | INSTOCK | 33,696 | ||
| 06095-00120000 | INSTOCK | 17,274 | ||||
| 06095-00340000 | INSTOCK | 13,000 | ||||
| 2SC6095-TD-E | onsemi | INSTOCK RoHS : Compliant | 8,983 | |||
| 776095-1 | TE Connectivity | INSTOCK | 4,734 | |||
| 06095-00250000 | INSTOCK | 3,233 | ||||
| 06095-002500000 | INSTOCK | 2,500 | ||||
| 26116095 | Molex | INSTOCK | 1,916 | |||
| 26116095- | Molex | INSTOCK | 1,916 | |||
| 88E6095FA2LGO1C000 | INSTOCK | 47 | ||||
| 181-8836-09-553 | INSTOCK | 3 | ||||
![]() Avnet Abacus | 1860950 | Phoenix Contact | FKCOW 2520STF508 FKCOW2520STF508 (Alt: 1860950) RoHS : Compliant | 0 | ||
| 10726095 | Aptiv PLC | (Alt: 10726095) RoHS : Compliant | 0 | |||
| 626095-4 | TE Connectivity | (Alt: 626095-4) RoHS : Compliant | 0 | |||
| 4304.6095 | Schurter Electronic Components | (Alt: 4304.6095) RoHS : Compliant | 0 | |||
| 6766095-1 | TE Connectivity | (Alt: 6766095-1) RoHS : Compliant | 0 | |||
| 7609-501LF | CTS Corporation | (Alt: 7609-501LF) RoHS : Compliant | 0 | |||
| 0473460951 | Weidmüller Interface GmbH & Co. KG | Connector Accessories Connector Marker Polyamide White (Alt: 0473460951) RoHS : Compliant | 0 | |||
| 0473560951 | Weidmüller Interface GmbH & Co. KG | Connector Accessories Connector Marker Polyamide White (Alt: 0473560951) RoHS : Compliant | 0 | |||
| 6-2399609-5 | TE Connectivity | (Alt: 6-2399609-5) RoHS : Compliant | 0 | |||
| 8-2266095-5 | TE Connectivity | (Alt: 8-2266095-5) RoHS : Not Compliant | 0 | |||
| 2-2399609-5 | TE Connectivity | (Alt: 2-2399609-5) RoHS : Compliant | 0 | |||
| 2-1633609-5 | TE Connectivity | (Alt: 2-1633609-5) RoHS : Compliant | 0 | |||
| EZPV60956MTC | Panasonic Electronic Components | Power Film Capacitor Metallized PP Radial Box 4 Pin 95 uF 10 Through Hole 600 V (Alt: EZPV60956MTC) RoHS : Compliant | 0 | |||
| 04560956-000 | TE Connectivity | (Alt: 04560956-000) RoHS : Compliant | 0 | |||
| SF2912-60955 | Amphenol Corporation | (Alt: SF2912-60955) RoHS : Compliant | 0 | |||
![]() Avnet Silica | MP2940AGRT-6095-Z | Monolithic Power Systems | Digital Multiphase Controller (Alt: MP2940AGRT-6095-Z) RoHS : Compliant | 0 | ||
![]() Component Electronics, Inc | M37510M6-095F | Mitsubishi Electric | IN STOCK SHIP TODAY | 504 | ||
| 250S60-9.56-02 | Tech-Etch | IN STOCK SHIP TODAY | 61 | |||
| 71-94-5231-6095 | Sumitube | IN STOCK SHIP TODAY | 20 | |||
| 609-5030 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 19 | ||
| 12160959-B | Delphi Automotive LLP | IN STOCK SHIP TODAY |
| 6 | ||
![]() DB Roberts | E3-106-0959 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | ||
| E3-126-0959 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| EFTP086095A | Essentra Components | TAPERED PLUG 0.86 X 0.95PAPER | 0 | |||
| D1-166-095-030 | Southco | These versatile economical quarter turn fasteners for high-volume light-duty applications provide a low installed cost attractive aesthetics and more generous tolerance ranges than other quarter turn fasteners. Built-in detents indicate full engagement | 0 | |||
| D1-166-095-030SE | Southco | These versatile economical quarter turn fasteners for high-volume light-duty applications provide a low installed cost attractive aesthetics and more generous tolerance ranges than other quarter turn fasteners. Built-in detents indicate full engagement | 0 | |||
| E3-106-095 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| 008060959902 | Essentra Components | 0 | ||||
| E3-146-095 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| E3-1016-095 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| SQP460959A | Essentra Components | 0.709 IN SQUARE CHROME FINISHE | 0 | |||
| E3-126-095 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| E3-1216-095 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
![]() EBV Elektronik | CVM-32-60-95-54-TC42-F5-2 | Luminus Devices | Studio COB Arrays LED LED Entertainment Lighting (Alt: CVM-32-60-95-54-TC42-F5-2) RoHS : Compliant | 0 | ||
![]() Flip Electronics | 2SC6095-TD-E | onsemi | Stock, Ship Today RoHS : Compliant |
| 27,000 | |
![]() Maritex | 796095-2 | TE Connectivity | Circular Connectors; 796095-2; TE CONNECTIVITY; 4; Black; Nylon; 4 RoHS : Compliant |
| 46 | |
![]() Master Electronics | 609-5031HD | TE Connectivity | Connector Accessories Strain Relief Straight Blue Package RoHS : Compliant |
| 800 | |
| MPCC-2-24-2-L-60-95.00-S | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MPCC-2-24-2-T-60-95.00-D-N | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 1-2047609-5 | TE Connectivity | CRIMPER INSULATION OVERLAP RoHS : Compliant |
| 0 | ||
| 936095-2 | TE Connectivity | 090III 20P PLUG ASSY BLACK RoHS : Compliant |
| 0 | ||
| 053516-0955 | ITT Interconnect Solutions | Dsub 9M Sod Gf Nickel RoHS : Compliant |
| 0 | ||
| 04-1006-0951 | TE Connectivity | PT5MA-100-N34-DN-420E-MC4 RoHS : Compliant |
| 0 | ||
| DHP106095S-6R8MHF | ITG Electronics Inc | Ferrite Through Hole Inductor - 6.8uH - DCR: 2.2 mohm - 42A RoHS : Compliant |
| 0 | ||
| FW-02-03-L-D-266-095 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-LM-D-216-095 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 1860950 | Phoenix Contact | PCB connector - nominal current: 12 A - rated voltage (III/2): 320 V - nominal cross section: 2.5 mm² - number of positions: 20 - pitch: 5.08 mm - connection method: Push-in spring connection - color: green - contact surface: Tin RoHS : Compliant |
| 0 | ||
| 7-2836095-7 | TE Connectivity | OCEAN_2.0_SPARE_PART_KIT-110F169O RoHS : Compliant |
| 0 | ||
| FW-02-03-F-D-236-095 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-FM-D-196-095 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-H-D-186-095 | Samtec Inc | RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3W06095 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm. N Male Right Angle to BNC Male Cable Using RG400 Coax. PE3W06095 is a N male right angle to BNC male cable using RG400 coax. This Pasternack N male right angle to BNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm BNC for connector 2. N right angle to BNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W06095 N male right angle to BNC male cable assembly is constructed with RG400 coax. | 8,235 | ||
| PE3W06095-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length: 24 inches. N Male Right Angle to BNC Male Cable 24 Inch Length Using RG400 Coax., Radio frequency assembly N male right angle to BNC male cable 24 inch length using RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male right angle to BNC male cable 24 inch length using RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle type N cable connection on one end and BNC cable connection on the other. Our right angle N type to BNC cable assemblies have a male gender on end 1 and male on end 2. This type N to BNC cable is a male to male coax assembly, PE3W06095-24, can also be known as a right angle N type plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to BNC plug cable assembly PE3W06095-24 is built with RG400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency type N right angle male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06095-24 can also be used in the other direction and will be BNC male to right angle N type male cable assembly if the opposite connectivity is required. Type N right angle plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to BNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to BNC male cable 24 inch length using RG400 coax. |
| 915 | ||
| PE3W06095-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length: 48 inches. N Male Right Angle to BNC Male Cable 48 Inch Length Using RG400 Coax., Radio frequency assembly N male right angle to BNC male cable 48 inch length using RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male right angle to BNC male cable 48 inch length using RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle type N cable connection on one end and BNC cable connection on the other. Our right angle N type to BNC cable assemblies have a male gender on end 1 and male on end 2. This type N to BNC cable is a male to male coax assembly, PE3W06095-48, can also be known as a right angle type N plug to BNC plug cable assembly and will be shipped same-day as it is purchased. N type plug to BNC plug cable assembly PE3W06095-48 is built with RG400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency type N right angle male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06095-48 can also be used in the other direction and will be BNC male to right angle N type male cable assembly if the opposite connectivity is required. Type N right angle plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to BNC cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to BNC male cable 48 inch length using RG400 coax. |
| 915 | ||
| PE3W06095-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. N Male Right Angle to BNC Male Cable 200 cm Length Using RG400 Coax., Radio frequency assembly N male right angle to BNC male cable 200 cm length using RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male right angle to BNC male cable 200 cm length using RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle type N cable connection on one end and BNC cable connection on the other. Our right angle N type to BNC cable assemblies have a male gender on end 1 and male on end 2. This type N to BNC cable is a male to male coax assembly, PE3W06095-200CM, can also be known as a right angle N type plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to BNC plug cable assembly PE3W06095-200CM is built with RG400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle N type to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency type N right angle male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06095-200CM can also be used in the other direction and will be BNC male to right angle type N male cable assembly if the opposite connectivity is required. Type N right angle plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to BNC cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to BNC male cable 200 cm length using RG400 coax. |
| 915 | ||
| PE3W06095-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length: 59.05 inches. N Male Right Angle to BNC Male Cable 150 cm Length Using RG400 Coax., Radio frequency assembly N male right angle to BNC male cable 150 cm length using RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male right angle to BNC male cable 150 cm length using RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle type N cable connection on one end and BNC cable connection on the other. Our right angle type N to BNC cable assemblies have a male gender on end 1 and male on end 2. This type N to BNC cable is a male to male coax assembly, PE3W06095-150CM, can also be known as a right angle type N plug to BNC plug cable assembly and will be shipped same-day as it is purchased. N type plug to BNC plug cable assembly PE3W06095-150CM is built with RG400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle N type to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency type N right angle male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06095-150CM can also be used in the other direction and will be BNC male to right angle type N male cable assembly if the opposite connectivity is required. N type right angle plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to BNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to BNC male cable 150 cm length using RG400 coax. |
| 915 | ||
| PE3W06095-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length: 36 inches. N Male Right Angle to BNC Male Cable 36 Inch Length Using RG400 Coax., Radio frequency assembly N male right angle to BNC male cable 36 inch length using RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male right angle to BNC male cable 36 inch length using RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle type N cable connection on one end and BNC cable connection on the other. Our right angle N type to BNC cable assemblies have a male gender on end 1 and male on end 2. This type N to BNC cable is a male to male coax assembly, PE3W06095-36, can also be known as a right angle N type plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to BNC plug cable assembly PE3W06095-36 is built with RG400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency type N right angle male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06095-36 can also be used in the other direction and will be BNC male to right angle N type male cable assembly if the opposite connectivity is required. Type N right angle plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to BNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to BNC male cable 36 inch length using RG400 coax. |
| 915 | ||
| PE3W06095-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length: 12 inches. N Male Right Angle to BNC Male Cable 12 Inch Length Using RG400 Coax., Radio frequency assembly N male right angle to BNC male cable 12 inch length using RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male right angle to BNC male cable 12 inch length using RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle type N cable connection on one end and BNC cable connection on the other. Our right angle N type to BNC cable assemblies have a male gender on end 1 and male on end 2. This type N to BNC cable is a male to male coax assembly, PE3W06095-12, can also be known as a right angle type N plug to BNC plug cable assembly and will be shipped same-day as it is purchased. N type plug to BNC plug cable assembly PE3W06095-12 is built with RG400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle N type to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency type N right angle male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06095-12 can also be used in the other direction and will be BNC male to right angle type N male cable assembly if the opposite connectivity is required. Type N right angle plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to BNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to BNC male cable 12 inch length using RG400 coax. |
| 915 | ||
| PE3W06095-50CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. N Male Right Angle to BNC Male Cable 50 cm Length Using RG400 Coax., Radio frequency assembly N male right angle to BNC male cable 50 cm length using RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male right angle to BNC male cable 50 cm length using RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle N type cable connection on one end and BNC cable connection on the other. Our right angle type N to BNC cable assemblies have a male gender on end 1 and male on end 2. This type N to BNC cable is a male to male coax assembly, PE3W06095-50CM, can also be known as a right angle N type plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to BNC plug cable assembly PE3W06095-50CM is built with RG400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle N type to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency type N right angle male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06095-50CM can also be used in the other direction and will be BNC male to right angle type N male cable assembly if the opposite connectivity is required. N type right angle plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to BNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to BNC male cable 50 cm length using RG400 coax. |
| 915 | ||
| PE3W06095-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. N Male Right Angle to BNC Male Cable 100 cm Length Using RG400 Coax., Radio frequency assembly N male right angle to BNC male cable 100 cm length using RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male right angle to BNC male cable 100 cm length using RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle type N cable connection on one end and BNC cable connection on the other. Our right angle type N to BNC cable assemblies have a male gender on end 1 and male on end 2. This type N to BNC cable is a male to male coax assembly, PE3W06095-100CM, can also be known as a right angle type N plug to BNC plug cable assembly and will be shipped same-day as it is purchased. N type plug to BNC plug cable assembly PE3W06095-100CM is built with RG400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency N type right angle male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06095-100CM can also be used in the other direction and will be BNC male to right angle type N male cable assembly if the opposite connectivity is required. Type N right angle plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to BNC cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to BNC male cable 100 cm length using RG400 coax. |
| 915 | ||
| PE3W06095-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length: 60 inches. N Male Right Angle to BNC Male Cable 60 Inch Length Using RG400 Coax., Radio frequency assembly N male right angle to BNC male cable 60 inch length using RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male right angle to BNC male cable 60 inch length using RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle N type cable connection on one end and BNC cable connection on the other. Our right angle type N to BNC cable assemblies have a male gender on end 1 and male on end 2. This type N to BNC cable is a male to male coax assembly, PE3W06095-60, can also be known as a right angle N type plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to BNC plug cable assembly PE3W06095-60 is built with RG400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency N type right angle male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06095-60 can also be used in the other direction and will be BNC male to right angle type N male cable assembly if the opposite connectivity is required. N type right angle plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to BNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to BNC male cable 60 inch length using RG400 coax. |
| 915 | ||
| PE6095 | Pasternack Enterprises | Key Specifications, Termination Type: RF Load, Connector Series: SMA, Connector Gender: Male, Minimum Frequency: DC, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Maximum VSWR: 1.25:1, Maximum Power: 5 Watt. 5 Watt RF Load Up to 18 GHz With SMA Male Input Black Anodized Aluminum Heatsink. PE6095 5 Watts RF load (also known as termination or dummy load) has a SMA connector that is male. This Pasternack 5 watts SMA male load / termination is rated for a maximum frequency of 18 GHz. Our SMA male termination load is a rf load termination with a 50 Ohm impedance. This SMA load / coax terminator is manufactured with no chain and passivated stainless steel body. Pasternack 50 Ohm SMA coaxial termination / load is RoHS compliant and has an average maximum VSWR of 1.25:1. PE6095 5 watts SMA male load termination is one of over 40,000 RF, microwave and millimeter wave components in-stock at Pasternack. Our SMA male 5 watts termination load will ship worldwide the same day as purchased. |
| 337 | ||
| PE3C6095 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm. TNC Male to TNC Male Cable Using PE-P195 Coax., Radio frequency assembly TNC male to TNC male cable using PE-P195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. TNC male to TNC male cable using PE-P195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and TNC cable connection on the other. Our TNC to TNC cable assemblies have a male gender on end 1 and male on end 2. This TNC to TNC cable is a male to male coax assembly, PE3C6095, can also be known as a TNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3C6095 is built with PE-P195 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this TNC male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. TNC plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC male cable using PE-P195 coax. | 0 | |||
| PE3W06095LF | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm. N Male Right Angle to BNC Male Cable Using RG400 Coax, LF Solder. PE3W06095LF is a N male right angle to BNC male cable using RG400 coax. This Pasternack N male right angle to BNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm BNC for connector 2. N right angle to BNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W06095LF N male right angle to BNC male cable assembly is constructed with RG400 coax. | 0 | |||
| PE71S6095 | Pasternack Enterprises | Key Specifications, Connector Series: SMA, Connector Gender: Female, Switch Design: SPDT, Minimum Frequency: DC, Maximum Frequency: 26.5 GHz, Impedance: 50 Ohm, Maximum Input Power (CW): 20 Watts, Maximum VSWR: 1.5:1, Maximum Insertion Loss: 0.5 dB, Minimum Isolation: 50 dB. SPDT Electromechanical Relay Failsafe Switch, DC to 26.5 GHz, 20W, 28V, SMA. PE71S6095 electromechanical RF relay switch from Pasternack is a SPDT design. Our SPDT electromechanical RF switch uses SMA connectors at 50 Ohm. This SMA RF relay SPDT switch has a maximum frequency of 26.5 GHz and maximum power of 20 Watts. The Pasternack radio frequency SPDT SMA electro-mechanical relay switch is rated at a control voltage of 28 Volts, indicator voltage and switching speed of 35ms. SMA SPDT electro mechanical RF relay switch features with an isolation minimum of 50 dB. SPDT electromechanical relay radio frequency switch PE71S6095 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our SPDT SMA coaxial RF relay electromechanical switch can ship worldwide the same day that it is bought as with our other available RF parts. |
| 0 | ||
| PE3W16095 | Pasternack Enterprises | Key Specifications, Connector Series 1: NEX10, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm. NEX10 Female to 4.3-10 Male Cable Using SPF-250 Coax. PE3W16095 is a NEX10 female to 4.3-10 male cable using SPF-250 coax. This Pasternack NEX10 female to 4.3-10 male cable assembly uses a 50 Ohm NEX10 for connector 1 and a 50 Ohm 4.3-10 for connector 2. Our female NEX10 to male 4.3-10 cable assembly uses a corrugated cable type that is 50 Ohm. Pasternack PE3W16095 NEX10 female to 4.3-10 male cable assembly is constructed with SPF-250 coax. | 0 | |||
![]() Vyrian | 54242-105260950LF | Amphenol Communications Solutions | Board Stacking Connector, 26 Contact(s), 2 Row(s), Male, Straight, 0.1 inch Pitch, Surface Mount Terminal, Black Insulator, Receptacle | 17,611 | ||
| 361-8836-09-552 | Dialight | Indicators | 16,527 | |||
BUK7609-55A,118![]() | Nexperia | Power Field-Effect Transistor, 75A I(D), 55V, 0.009ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 12,948 | |||
| 1609581 | Phoenix Contact | Barrier Strip Terminal Block, 16A, 1 Row(s), 1 Deck(s) RoHS : Compliant | 11,585 | |||
| MAX16095UK22HOB | Analog Devices (Maxim Integrated) | 11,213 | ||||
| MAX16095UK22HOB-T | Analog Devices (Maxim Integrated) | 10,662 | ||||
| CAT6095VP2GT4 | onsemi | Serial Switch/Digital Sensor, 12 Bit(s), CMOS, Rectangular, 8 Pin, Surface Mount RoHS : Compliant | 10,478 | |||
| 5962-01-260-9526 | Analog Devices Inc | Operational Amplifier, 2 Func, 3000uV Offset-Max, BIPolar, CDIP8 RoHS : Not Compliant | 8,425 | |||
| 1836095 | Phoenix Contact | Modular Terminal Block, 8A, 1.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 8,163 | |||
BUK9609-55A,118![]() | NXP Semiconductors | Power Field-Effect Transistor, 75A I(D), 55V, 0.01ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 6,355 | |||
| BUK7609-55A | Nexperia | Power Field-Effect Transistor, 75A I(D), 55V, 0.009ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 6,137 | |||
| 1609565 | Phoenix Contact | Barrier Strip Terminal Block, 16A, 1 Row(s), 1 Deck(s) RoHS : Compliant | 6,068 | |||
| BUK9609-55A | Nexperia | Power Field-Effect Transistor, 75A I(D), 55V, 0.01ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 5,959 | |||
| 1609549 | Phoenix Contact | Barrier Strip Terminal Block, 16A, 1 Row(s), 1 Deck(s) RoHS : Compliant | 5,369 | |||
ADP1716-095![]() | Analog Devices Inc | Fixed Positive LDO Regulator, 0.95V, 0.25V Dropout, PDSO8 | 4,957 | |||
![]() Waytek, Inc. | 7000006095 | 3M | 3M 7000006095 Scotch Vinyl Electrical Tape 35 is blue professional-grade 3/4" x 66' tape with 7 mil thickness and a 600VDC rating. Rated from -14F to 176F, it is flame retardant, stretches to conform around irregular shapes, and resists UV, abrasion, moisture, and solvents. |
| 801 | |
![]() Win Source Electronics | 885012206095 | Wurth Elektronik | CAP CER 0.1UF 50V X7R 0603 RoHS : Compliant |
| 92,000 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |